编号 | 中文名称 | 英文名称 |
GB 9486-1988 | 柴油机稳态排气烟度及测定方法 | Diesel engine--Exhaust smoke measurement method at steady state |
GB 11122-2006 | 柴油机油(1997年版) | Diesel engine oils |
GB 14097-1999 | 中小功率柴油机噪声限值 | Noise limits for small and medium power dieselengines |
GB 8189-87 | 柴油机排放试验方法,第二部分:地下矿、机车、船舶及其它工农业机械用 | Diesel engine emissions - Test methods -Part 2: for underground mine, rail-traction, marine and other industrial and agricultural machineries |
GB/T 5923-1986 | 汽车柴油机燃油滤清器的试验方法 | Test methods of fuel filters for automotive compression ignition engines |
GB/T 5924-1986 | 汽车柴油机燃油滤清器的试验值及分级 | Test values and classification of fuel filters for automotive compression compression ignition engines |
GB/T 14363-1993 | 柴油机机油消耗测定方法 | Measurement of lubricant oil consumption for diesel engines |
GB 8840-1988 | 船用柴油机排气烟度限值 | Limit for exhaust gas smoke of marine diesel engine |
GB 11871-1989 | 船用柴油机辐射的空气噪声限值 | Limits of airborne noise emitted by marine diesel engines |
GB/T 15097-1994 | 船用柴油机排气排放污染物测量方法 | Measurement method for emission pollutants of exhaust gas of marine diesel engine |
GB/T 5772-1986 | 柴油机喷油嘴偶件技术条件 | Technical specification for fuel injection nozzles of diesel engines |
GB/T 9911-1988 | 船用柴油机辐射的空气噪声测量方法 | Measurement method of airborne noise emitted by marine diesel engine |
GB/T 3221-1996 | 柴油机动力内河船舶系泊和航行试验大纲 | Code for dock and sea trials of diesel-driven inland ships |
ANSI/ASTM D4046-1991 | 用分光光度法对柴油机燃料中硝酸烷基酯的试验方法 | Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (05.02) |
ANSI/ASTM D5967-2005 | T-8柴油机中柴油机油评价试验方法 | Test Method for Evaluation of Diesel Engine Oils in the T-8 Diesel Engine |
ANSI/ASTM D6278-2002 | 用欧洲柴油机喷射装置测定含聚合物液体的剪切稳定性的试验方法 | Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus |
ANSI/ASTM D6594-2005 | 柴油机油在135℃时的腐蚀评估测试方法 | Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135oC |
ANSI/ASTM D6681-2005 | 高速单缸柴油机履带车1P测试程序中发动机油的评估试验方法 | Test Method for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - Caterpillar 1p Test Procedure |
ANSI/ASTM D6728-2001 | 采用旋转圆盘电极原子发射光谱法测定气体涡轮机和柴油机燃料杂质的试验方法 | Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry |
ANSI/ASTM D6923-2005 | 高速、单缸柴油机中的引擎机油性能评估测试方法.Caterpillar 1R试验程序 | Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine - Caterpillar 1R Test Procedure |
ANSI/ASTM D6987a-2005 | T-10废气再流通柴油机中的柴油机油性能评估测试方法 | Test Method for Evaluation of Diesel Engine Oils in the T-10 Exhaust Gas Recirculation Diesel Engine |
ANSI/ASTM D7109-2006 | 使用30和90圈下欧洲柴油机注射装置的含多聚物的液流的剪切稳定性的试验方法 | Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles |
ANSI/ASTM D975-2006 | 柴油机燃料油规范 | Specification for Diesel Fuel Oils |
ANSI/SAE J1668-1993 | 柴油机燃油喷射泵的试验 | Diesel Engines-Fuel Injection Pump Testing |
ANSI/SAE J539-1993 | 柴油机电气系统的电压 | Electrical Systems, Voltages for Diesel |
ASTM D 4868-2000 | 燃烧炉燃料和柴油机燃料燃烧的净热量和总热量估算的标准试验方法 | Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels |
ASTM D 6278-2002 | 使用欧洲柴油机喷射装置测定含液体聚合物的剪切稳定性的标准试验方法 | Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus |
ASTM D 6594-2005 | 135℃时柴油机油腐蚀性评价的标准试验方法 | Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C |
ASTM D 6987/D 6987Ma-2005 | T-10废气再循环柴油机中柴油机油评价的标准试验方法 | Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine |
ASTM F 1431-1992 | 柴油机排气阻水阀 | Standard Specification for Water Trap for Diesel Exhaust |
BS 3818-1964 | 柴油机车及有轨内燃机车自动密封加油接头规范 | Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars |
BS 6380-1997 | 符合BS EN 590和BS 2869 A2级及D级柴油机燃料和煤气油的低温性能和寒冷气候使用指南 | Guide to low temperature properties and cold weather use of diesel fuels and gas oils conforming to BS EN 590 and classes A2 and D of BS 2869 |
BS 6680-1985 | 煤矿和其他沼气敏感矿用柴油机防火设备规范 | Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp |
BS AU 141a-1971 | 道路车辆用柴油机性能规范 | Specification for the performance of diesel engines for road vehicles |
BS DD ISO/PAS 22241-1-2006 | 柴油机发动机.氮氧化物还原剂AUS 32.质量要求 | Diesel engines - NOx reduction agent AUS 32 - Quality requirements |
BS DD ISO/PAS 22241-2-2006 | 柴油机发动机.氮氧化物还原剂AUS 32.试验方法 | Diesel engines - NOx reduction agent AUS 32 - Test methods |
BS EN ISO 8861-1998 | 造船.柴油机船舶发动机室的通风.设计要求和计算依据 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations |
BS ISO 13555-2-2003 | 柴油机.柴油机喷油系统动态定时的检查程序.试验方法 | Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Test method |
BS ISO 2974-2005 | 柴油机.60°锥孔的高压油管接头管端部连接 | Diesel engines - High-pressure fuel injection pipe end-connections with 60 ° female cone |
BS ISO 6519-2004 | 柴油机.喷油泵.轴端和毂盘的锥度 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs |
BS ISO 7612-2006 | 柴油机.共轨燃料喷射系统用基座安装直列式喷油泵和高压供油泵.安装尺寸 | Diesel engines - Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems - Mounting dimensions |
BS MA 9-1970 | 柴油机和锅炉上风烟道用废气管道法兰、螺栓和密封垫 | Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes |
DIN 45635-52-1986 | 机器排放的空气传播噪声的测量.第52部分:包洛面法.矿山柴油机车和矿山轨道车 | Measurement of airborne noise emitted by machines; enveloping surface method; mine diesel locomotives and mine road railers |
DIN 51452-1994 | 润滑剂的试验.柴油机废油中油垢含量的测定.红外线光谱法 | Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry |
DIN 73358-1-1977 | 第1部分:柴油机用燃油过滤器.A 型外壳连接件 | Fuel filters for Diesel engines, shape A, body connections |
DIN 73358-2-1977 | 第2部分:柴油机用燃油过滤器.过滤器插入件 | Fuel filters for Diesel engines; filter inserts |
DIN 73360-1977 | 柴油机用可转动燃油过滤器.A型外壳连接 | Reversible fuel filters for Diesel engines, shape A, body connections |
DIN 73365-3-1970 | 柴油机喷射泵.第3部分:压力管道连接件 | Injection pumps for Diesel engines; pressure pipe connections |
DIN EN ISO 8861-1998 | 造船.柴油机船舶机舱的通风.设计要求和计算基准 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998); German version EN ISO 8861:1998 |
DIN ISO 2697-2002 | 柴油机.喷油咀."S”规格 (ISO 2697:1999) | Diesel engines - Fuel nozzles - Size "S" (ISO 2697:1999) |
DIN ISO 6519-1995 | 柴油机.喷油泵.轴端和毂环的锥度; 等同采用 ISO 6519:1993 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs; identical with ISO 6519:1993 |
EN 14214-2003 | 车用燃料 柴油机用脂肪酸甲酯(FAME) 试验方法和要求 | Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods |
EN ISO 16147-2002 | 小艇 内装柴油机 装于发动机的燃料及电气元件 | Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO 16147:2002) |
EN ISO 8861-1998+AC-1998 | 造船 柴油机船舶机舱通风 设计要求和计算基准 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998) |
GB 19756-2005 | 三轮汽车和低速货车用柴油机排气污染物排放限值及测量方法(中国I、II阶段) | Limits and measurement methods for exhaust pollutants from diesel engines of tr-wheellow-speed goods vehicles |
GB 20419-2006 | 农用柴油机油 | Diesel engine oils for agricultural use |
GB 20891-2007 | 非道路移动机械用柴油机排气污染物排放限值及测量方法(中国Ⅰ、Ⅱ阶段) | |
GB/T 10098-1988 | 船用中速柴油机齿轮箱技术条件 | The specification of marine gearbox for medium speed diesel engine |
GB/T 10397-2003 | 中小功率柴油机振动评级 | Small and medium power engines--Evaluation ofvibration |
GB/T 10826-1989 | 柴油机燃油系统术语 | Fuel system for diesel engine--Terminology |
GB/T 11868-1996 | 救生艇用柴油机组 | Diesel engine set for lifeboats |
GB/T 13410-1992 | 船用柴油机涡轮增压器技术条件 | The technical specifications of turbochargers used for marine diesel engines |
GB/T 16570-1996 | 汽车柴油机架装直列式喷油泵安装尺寸 | Motor vehicles--Cradle-mounted in-line fuel injection pumps for diesel engines--Mounting dimensions |
GB/T 17038-1997 | 内燃机车柴油机油 | Railroad diesel engine oils |
GB/T 17653-1999 | 汽车柴油机旋装式燃油滤清器安装和连接尺寸 | Motor vehicles--Spin-on fuel filters for combustion-ignition engines--Mounting and dimensions |
GB/T 17805-1999 | 柴油机进、排气流量的测量 | Measurement of intake air or exhaust gasflow of diesel engines |
GB/T 20828-2007 | 柴油机燃料调合用生物柴油 (BD100) | |
GB/T 20845-2007 | 小艇 舷内柴油机 机装燃油和电气部件 | |
GB/T 2497-1993 | 船用柴油机增压空气冷却器 | Charge air coolers for marine diesel engines |
GB/T 2940-2005 | 柴油机用喷油泵、调速器、喷油器弹簧技术条件 | Technical specifications of springs for fuel pump,governor and injecter of diesel engines |
GB/T 3093-2002 | 柴油机用高压无缝钢管 | High-pressure seamless steel tubes for diesel engine |
GB/T 3367.1-2000 | 铁道机车名词术语柴油机零部件名词 | Glossary of terms for railway locomotive--Names of component parts for diesel engine |
GB/T 3367.7-2000 | 铁道机车名词术语柴油机术语 | Glossary of terms for railway locomotive--Terms of diesel engine |
GB/T 3475-1983 | 船用柴油机调速系统技术条件 | Speed governing of marine diesel engines--Specifications |
GB/T 3476-1983 | 船用柴油机调速系统试验方法 | Speed governing of marine diesel engine,methods of test |
GB/T 5264-1985 | 柴油机喷油泵柱塞偶件技术条件 | Technical specification of fuel injection pump plunger and barrel assembly for diesel engines |
GB/T 5741-1985 | 船用柴油机排气烟度测量方法 | Measurement method for exhaust gas smoke ofmarine diesel engine |
GB/T 5770-1997 | 柴油机柱塞式喷油泵总成技术条件 | Technical requirements for jerk fuel injection pump |
GB/T 5771-1986 | 柴油机喷油泵出油阀偶件技术条件 | Technical specification for delivery valves of fuel injection pumps of diesel engines |
GB/T 5822.2-2004 | 铁路内燃机车柴油机油石油醚不溶物测定方法 | Test method of petroleum ether insolubles in lubricating oil for railway locomotive diesel engine |
GB/T 5822.4-1986 | 铁路柴油机车柴油机油换油指标斑点试验方法 | Oil-change criterion of railway diesel locomotive engine oils--Blotter spot test method |
GB/T 5913-1986 | 柴油机车车内设备机械振动烈度评定方法 | Mechanical vibration of machines and equipments in diesel locomotive Evaluation of vibration severity in site |
GB/T 6301-1986 | 船用柴油机燃油消耗率测定方法 | Determination of fuel consumption rate for marine diesel engine |
GB/T 6302-1986 | 船用柴油机热工参数的测量 | Measurement of thermodynamics parameters formarine diesel engine |
GB/T 6573-1986 | 拖拉机柴油机散热器型号编制方法 | Cooling water radiators for tractor diesel engines--Method of identification symbols |
GB/T 6574-1986 | 拖拉机柴油机散热器型式、参数和连接尺寸 | Types and dimensions and installation parameters of cooling water radiators for tractor diesel engines |
GB/T 7028-1986 | 船用柴油机空气冷却器试验方法 | Test method of charge air coolers for marine diesel engines |
GB/T 7184-1987 | 中小功率柴油机振动测量方法 | Measurement method of vibration for small and medium power diesel engines |
GB/T 7607-2002 | 柴油机油换油指标 | Criteria for change of engine oil used in diesel engine |
GB/T 8029-1987 | 柴油机喷油泵校泵油 | Calibration fluid for diesel injection pump |
GB/T 9487-1988 | 柴油机自由加速排气烟度的测量方法 | Diesel engines--Exhaust smoke measurement method at free acceleration |
ISO 13948-1-2000 | 柴油机 燃料喷射泵和燃料喷射器低压连接 第1部分:螺纹连接件 | Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 1: Threaded connections |
ISO 13948-2-2000 | 柴油机 燃料喷射泵和燃料喷射器低压连接 第2部分:无螺纹(推进式)连接件 | Diesel engines - Fuel injection pumps and fuel injector low-pressure connections - Part 2: Non-threaded (push-on) connections |
ISO 14681-1998 | 柴油机 燃料喷射泵试验 燃料喷射器的校正 | Diesel engines - Fuel injection pump testing - Calibration fuel injectors |
ISO 2697-1999 | 柴油机 喷油嘴偶件 “S”尺寸 | Diesel engines - Fuel nozzles - Size "S" |
ISO 2698-1993 | 柴油机 柴油机喷油器件 7型和28型 | Diesel engines; clamp-mounted fuel injectors, types 7 and 28 |
ISO 2699-1994 | 柴油机 法兰安装式“S”号喷油嘴 2、3、4、5和6型 | Diesel engines; flange-mounted fuel injectors, size "S"; types 2, 3, 4, 5 and 6 |
ISO 2974-2005 | 柴油机.60度锥孔的高压油管接头管端部连接 | Diesel engines - High-pressure fuel injection pipe end-connections with 60 degrees female cone |
ISO 4010-1998 | 柴油机 轴针式标准喷油嘴偶件 | Diesel engines - Calibrating nozzle, delay pintle type |
ISO 4020-2001 | 道路车辆 柴油机过滤器 试验方法 | Road vehicles - Fuel filters for diesel engines - Test methods |
ISO 4093-1999 | 柴油机 喷油泵 试验台用高压油管 | Diesel engines - Fuel injection pumps - High-pressure pipes for testing |
ISO 4113-1988 | 道路车辆 柴油机喷油泵的校泵油 | Road vehicles; calibration fluid for diesel injection equipment |
ISO 6519-2004 | 柴油机.喷油泵.轴端和毂盘的锥度 | Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs |
ISO 7026-1997 | 柴油机 S尺寸轴针式喷油嘴偶件B型拧入式喷嘴器件(20、21、21.1和27型) | Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B" |
ISO 7299-1996 | 柴油机 喷油泵端面法兰 | Diesel engines - End-mounting flanges for fuel injection pumps |
ISO 7310-1993 | 柴油机 有水平法兰盘的旋转式燃油滤清器顶盖 安装和连接尺寸 | Diesel engines; heads for spin-on fuel filters with horizontal flange; mounting and connecting dimensions |
ISO 7311-1993 | 柴油机 有垂直法兰盘的燃油滤清器顶盖 安装和连接尺寸 | Diesel engines; heads for fuel filters with vertical flange; mounting and connecting dimensions |
ISO 7879-1997 | 柴油机 柱塞式喷油泵 安装尺寸 | Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions |
ISO 8356-1984 | 道路车辆 柴油机 22型螺旋拧入式喷油器 | Road vehicles; Diesel engines; Screw-in injector, type 22 |
ISO 8861-1998 | 造船 柴油机船舶机舱通风 设计要求和计算基准 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations |
ISO 8984-1-1993 | 柴油机 喷油器试验 第1部分:手压试验和调整装置 | Diesel engines; testing of fuel injectors; part 1: hand-lever-operated testing and setting apparatus |
ISO 8984-2-1993 | 柴油机 喷油器试验 第2部分:试验程序 | Diesel engines; testing of fuel injectors; part 2: test methods |
ISO 9102-1997 | 柴油机 压燃式发动机用24、25、26和26 1型螺旋拧入式喷油器 | Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1 |
ISO/PAS 22241-1-2005 | 柴油机发动机.氮氧化物还原剂AUS 32.第1部分:质量要求 | Diesel engines - NOx reduction agent AUS 32 - Part 1: Quality requirements |
ISO/PAS 22241-2-2005 | 柴油机发动机.氮氧化物还原剂AUS 32.第2部分:试验方法 | Diesel engines - NOx reduction agent AUS 32 - Part 2: Test methods |
JB 8891-1999 | 中小功率柴油机 排气污染物排放限值 | |
JB/T 10592-2006 | 拖拉机柴油机散热器型式、参数和连接尺寸 | |
JB/T 10630-2006 | 通用小型柴油机 产品修理、更换、退货工作导则 | General purpose small diesel engines-Guidelines for product warranty |
JB/T 10715-2007 | 柴油机 喷油泵端面法兰安装尺寸 | |
JB/T 10716-2007 | 柴油机 直列式喷油泵 平底托架安装尺寸 | |
JB/T 10717-2007 | 柴油机 直列式喷油泵 弧形底安装尺寸 | |
JB/T 3923-2005 | 柴油机喷油泵联轴器 型式及基本尺寸 | |
JB/T 4198.1-2001 | 工程机械用柴油机 技术条件 | |
JB/T 4198.2-1999 | 工程机械用柴油机 性能试验方法 | |
JB/T 50063-2000 | 柴油机喷油泵供油角度自动提前器总成可靠性 评定方法、试验方法、故障分类及判定规则 | |
JB/T 50188-1999 | 工程机械用柴油机 可靠性、耐久性试验方法 | |
JB/T 5081-1991 | 中小功率柴油机排气消声器 技术条件 | |
JB/T 5085-1991 | 柴油机水冷却器 技术条件 | |
JB/T 51127-1999 | 中小功率柴油机 产品可靠性考核 | |
JB/T 5175-2006 | 柴油机喷油泵、喷油器总成 主要零件金相检验 | Metallographic examination of diesel fuel injection pump and assemblies of nozzle and holder |
JB/T 5239-1991 | 柴油机纸质滤芯柴油滤清器总成 技术条件 | |
JB/T 5240-1991 | 柴油机柴油滤清器纸质滤芯 技术条件 | |
JB/T 6009-1992 | 小功率柴油机水箱 技术条件 | |
JB/T 6013-2000 | 柴油机低压金属油管 技术条件 | |
JB/T 6014-2000 | 柴油机高压油管 技术条件 | |
JB/T 6015-2000 | 柴油机低压输油胶管 技术条件 | |
JB/T 6293-2006 | 柴油机 喷油器试验 手压式喷油器校验器 | Diesel engines-Testing of fuel injectors Hand-lever operated testing and setting apparatus |
JB/T 6665.1-1993 | 轻小型柴油机—泵直联机组 型式与基本参数 | |
JB/T 6665.2-1993 | 轻小型柴油机—泵直联机组 技术条件 | |
JB/T 7173.1-2004 | 柴油机喷油泵柱塞偶件 技术条件 | |
JB/T 7173.2-2004 | 柴油机喷油泵柱塞偶件 性能试验方法 | |
JB/T 7174.1-2004 | 柴油机喷油泵出油阀偶件 技术条件 | |
JB/T 7174.2-2004 | 柴油机中驱动离心点火泵用电池接头标准 | Standard for battery contactors for use in diesel engines driving centrifugal fire pumps |
JB/T 7296-2004 | 柴油机喷油嘴偶件 技术条件 | |
JB/T 7297-2004 | 柴油机喷油嘴偶件 性能试验方法 | |
JB/T 7661-2004 | 柴油机油泵油嘴产品清洁度 限值及测定方法 | |
JB/T 7761.1-2004 | 柴油机喷油泵供油角度自动提前器 技术条件 | |
JB/T 7761.2-2004 | 柴油机喷油泵供油角度自动提前器 性能试验方法 | |
JB/T 8121-1999 | 柴油机喷油泵试验台用高压油管组件 | |
JB/T 8122-1999 | 柴油机 柴油滤清器 试验方法 | Diesel engines - Fuel filters - Test method |
JB/T 8580-1997 | 柴油机用氮化硅电热塞技术条件 | |
JB/T 8818-1998 | 柴油机喷油器总成 技术条件 | |
JB/T 8819-1998 | 柴油机燃油喷射装置产品型号编制方法 | |
JB/T 8895-1999 | 中小功率柴油机 通用技术条件 | |
JB/T 9729-1999 | 柴油机喷油泵柱塞偶件、出油阀偶件、喷油嘴偶件径部密封值样品 技术条件 | |
JB/T 9730-1999 | 柴油机喷油嘴偶件、喷油泵柱塞偶件、喷油泵出油阀偶件 金相检验 | |
JB/T 9731.1-1999 | 柴油机喷油泵凸轮轴 技术条件 | |
JB/T 9731.2-1999 | 柴油机喷油泵凸轮轴 轴端尺寸 | |
JB/T 9751-1999 | 柴油机 液压调速器 技术条件 | |
JB/T 9773.1-1999 | 柴油机 台架试验考核方法 | |
JB/T 9773.2-1999 | 柴油机 起动性能试验方法 | |
JIS A8501-1994 | 柴油机打桩汽锤规范的标准格式 | Standard form of specifications of diesel pile hammers |
JIS B8014-1999 | 恒速柴油机的试验方法 | Methods of test for constant speed diesel engines |
JIS D1101-1985 | 柴油机排烟测定 | Diesel engine smoke measurement |
JIS D3608-1999 | 柴油机.喷油泵和轮毂轴末端锥度 | Diesel engines -- Tapers for shaft ends of fuel injection pumps and hubs |
JIS D3632-1999 | 道路车辆.柴油机燃油喷嘴体的形状和尺寸.规格P | Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "P" |
JIS D3636-2003 | 道路车辆.柴油机燃料喷射泵试验.枢轴型校准喷嘴 | Road vehicles -- Diesel fuel injection equipment testing -- Pintle type calibrating nozzle |
JIS D8004-1986 | 汽车柴油机反射型烟度计 | Reflection type smokemeters for automobile diesel engine |
JIS D8005-1973 | 汽车柴油机排烟测量用消光式烟度计 | Light extinction type smokemeters for measuring automotive diesel exhaust |
JIS F0407-1998 | 造船.柴油机拖动的船舶发动机室的通风.设计要求和计算依据 | Shipbuilding -- Engine-room ventilation in diesel-engined ships -- Design requirements and basis of calculations |
MT 990-2006 | 矿用防爆柴油机通用技术条件 | |
MT/T 588-1996 | 煤矿用防爆柴油机胶套轮/齿轨卡轨车技术条件 | |
MT/T 589-1996 | 煤矿用防爆柴油机钢轮/齿轨机车及齿轨装置 | |
MT/T 921-2002 | 煤矿柴油机粘着与齿轨驱动卡轨车型式与参数 | |
MT/T 989-2006 | 矿用防爆柴油机无轨胶轮车通用技术条件 | |
NF J31-155-2002 | 造船.柴油机船的发动机室的通风.设计要求和计算依据 | Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations. |
NF M07-070-1993 | 液体燃料.柴油机和家用供暖设备的燃料.用浸渍带试验查找需氧微生物 | LIQUID FUELS. FUELS FOR DIESEL ENGINES AND DOMESTIC HEATING INSTALLATIONS. SEARCH FOR AEROBIC MICRO-ORGANISM USING THE IMMERSED STRIP TEST. |
NF R16-309-1988 | 喷油咀.柴油机用S型 | Road vehicles. Fuel injection nozzles. Size “S“. |
prEN ISO 20844-2002 | 石油及石油产品 用柴油机喷嘴测定含聚合物油类的剪切稳定性 | Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO/DIS 20844:2002) |
QC/T 471-2006 | 汽车柴油机技术条件 | Specifications for auto diesel engines |
QC/T 508-1999(2005) | 汽车柴油机用喷油泵总成技术条件 | |
QC/T 509-1999(2005) | 汽车柴油机喷油泵柱塞偶件技术条件 | |
QC/T 510-1999(2005) | 汽车柴油机喷油泵出油阀偶件技术条件 | |
QC/T 511-1999(2005) | 汽车柴油机喷油器针阀偶件技术条件 | |
QC/T 512-1999(2005) | 汽车柴油机用喷油泵及喷油器清洁度测定方法及限值 | |
QC/T 540-1999(2005) | 汽车柴油机"S"尺寸的2型法兰或压板安装喷油器体 | |
QC/T 541-1999(2005) | 汽车柴油机"S"尺寸的Ⅱ型法兰或压板安装喷油器体 | |
QC/T 542-1999(2005) | 汽车柴油机"S"尺寸的5型和6型法兰或压板安装喷油器体 | |
QC/T 543-1999(2005) | 汽车柴油机"S"尺寸的Ⅰ型螺纹安装喷油器体 | |
QC/T 590-1999(2005) | 汽车柴油机涡轮增压器技术条件 | |
QC/T 591-1999(2005) | 汽车柴油机涡轮增压器试验方法 | |
QC/T 767-2006 | 汽车 柴油机旋装式燃油滤清器 安装和连接尺寸 | |
QC/T 771-2006 | 汽车柴油机纸质滤芯柴油细滤器总成技术条件 | Specifications of diesel-fuel fine filter assembly with paper element for automotive diesels |
SH/T 0075-1991(2006年确认) | CC级柴油机油高温清净性评定法(1135C2法) | |
SH/T 0261-1992(2006年确认) | CD级柴油机油高温清净性评定法(1135D2法) | |
SH/T 0577-1993(2006年确认) | 铁路柴油机油高温摩擦磨损性能测定法(青铜-钢法) | |
SH/T 0723-2002 | 柴油机油腐蚀性能评定法 | |
SH/T 0754-2005 | 柴油机油在135℃下腐蚀性能评定法 | |
SH/T 0760-2005 | 柴油机油性能评定法(MACK T-8法) | |
SH/T 0761-2005 | 柴油机油性能评定法(MACK T-9法) | |
SH/T 0764-2005 | 柴油机喷嘴结焦试验方法(XUD-9法) | |
SH/T 0782-2005 | 柴油机油性能评定法(开特皮勒1K/1N法) | |
SH/T 0786-2006 | 柴油机油清静性评定法(开特皮勒1M-PC法) | |
SY/T 0080-93 | 油气田柴油机发电站设计规范 | |
SY/T 5030-2006 | 石油天然气工业用柴油机 | The diesel engine for the petroleum and natrual gas industry |
SY/T 5142-1995 | 石油钻机用190系列柴油机大修理技术条件 | |
SY/T 5640-93 | 柴油机计时器技术条件 | |
SY/T 6187-1997 | 石油钻机用190系列柴油机使用报废条件 | |
SY/T 6187-1997(2005) | 石油钻机用190系列柴油机使用报废条件 | |
SY/T 6664-2006 | 石油钻机用柴油机偶合器机组 | Diesel hydraulic coupling set for oil drilling rig |
UL 1247-1995 | 防火离心泵驱动用柴油机 | Diesel engines for driving centrifugal fire pumps |
YS/T 210-1994(2005) | 柴油机排气净化球型铂催化剂 | |