| 编号 | 中文名称 | 英文名称 |
|---|
| EN 122001-1993
| 空白详细规范：无线电频率连接器的CECC军用规范(MIL-C-39012类型)
| Blank detail specification: CECC military specification for radio frequency connectors [type MIL-C-39012]
|
| EN 122002-1993
| 空白详细规范：无线电频率同轴连接器
| Blank detail specification: Radio frequency coaxial connectors
|
| EN 12483-1999
| 液体泵 带频率转换器的泵设备 保证和兼容性试验
| Liquid pumps - Pump units with frequency inverters - Guarantee and compatibility tests
|
| EN 136001-1992
| 空白详细规范：脉冲磁腔管(不包括频率快变磁控管)
| Blank detail specification:Pulsed magnetrons (excluding frequency agile magnetrons)
|
| EN 175300-1996
| 分规范：频率在3MHz以下的矩形连接器
| Sectional specification: Rectangular connectors for frequencies below 3 MHz
|
| EN 300152 V 1.2.1-1998
| 电磁兼容性与无线电频谱事宜（ERM） 仅用于归航的频率为121.5MHz或频率为121.5MHz和243MHz的海上应急示位
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime Emergency Position Indicating Radio Beacons (EPIRBs) intended for use on the frequency 121,5 MHz, or the frequencies 121,5 MHz and 243 MHz for homing purposes only - Technical characteristics and methods of measurement
|
| EN 300220-1 V 1.2.1-1997
| 电磁兼容性与无线电频谱事宜（ERM） 短程装置 应用在25MHz至1000MHz频率范围内带500mW以下功率电平的无线
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short range devices - Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW - Part 1: Parameters intended for regulatory purposes
|
| EN 300220-2 V 1.2.1-1997
| 电磁兼容性与无线电频谱事宜（ERM） 短程装置 应用在25MHz至1000MH频率范围内带500mW以下功率电平的无线
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short range devices - Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW - Part 2: Supplementary parameters not intended for regulatory purposes
|
| EN 300330 V 1.2.1-1998
| 电磁兼容性与无线电频谱事宜（ERM） 短程装置（SRD） 频率范围在9kHz至25MHz范围内的无线电设备和频率范
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics and test methods for radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz
|
| EN 300422 V 1.2.1-1998
| 电磁兼容性与无线电频谱事宜（ERM） 25MHz至3GHz频率范围内无线扩音器的技术特征和试验方法
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and test methods for wireless microphones in the 25 MHz to 3 GHz frequency range
|
| EN 300831 V 1.1.1-1998
| 电磁兼容性与无线电频谱事宜（ERM） 运行于1,6/2,4GHz和2 GHz频率波段并应用于卫星个人通信网（S-PCN）的
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) for Mobile Earth Stations (MES) used within Satellite Personal Communications Networks (S-PCN) operating in the 1,6/2,4 GHz and 2 GHz frequency bands
|
| EN 300832 V 1.1.1-1998
| 电磁兼容性与无线电频谱事宜（ERM） 运行于1GHz频率以下波段并使用地球低轨卫星（LEO）提供低比特率数据通
| Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using satellites in Low Earth Orbits (LEO) operating in frequency bands below 1 GHz
|
| EN 301055 V 1.1.1-1998
| 传输与多路复用技术（TM） 数字无线接力系统（DRRS） 1GHz至3GHz频率范围内直接序列码分多址联接（DS-CDM
| Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Direct Sequence Code Division Multiple Access (DS-CDMA) point-to-multipoint DRRS in frequency bands in the range 1 GHz to 3 GHz
|
| EN 301128 V 1.1.1-1997
| 传输与多路复用技术（TM） 数字无线接力系统（DRRS） 准同步数字系列（PDH） 在13GHz、15GHz和18GHz频率
| Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Plesiochronous Digital Hierarchy (PDH) - Low and medium capacity DRRS operating in the 13 GHz, 15 GHz and 18 GHz frequency bands
|
| EN 301213-1 V 1.1.1-1998
| 传输与多路复用技术（TM） 数字无线接力系统（DRRS） 使用不同存取方法并在24.25GHz至29.5 GHz频率范围内
| Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Point-to-multipoint DRRS in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods - Part 1: Basic parameters
|
| EN 301213-2 V 1.1.1-1998
| 传输与多路复用技术（TM） 数字无线接力系统（DRRS） 使用不同存取方法并在24.25 GHz至29.5GHz频率范围内
| Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Point-to-multipoint DRRS in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods - Part 2: Frequency Division Multiple Access (FDMA) methods
|
| EN 301216 V 1.1.1-1998
| 传输与多路复用技术（TM） 数字无线接力系统（DRRS） 准同步数字系列（PDH） 运行在3GHz 至11GHz频率波
| Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Plesiochronous Digital Hierarchy (PDH) - Low and medium capacity and STM-0 DRRS operating in frequency bands in the range 3 GHz to 11 GHz
|
| EN 301253 V 1.1.1-1998
| 传输与多路复用技术（TM） 数字无线接力系统（DRRS） 跳频-码分多址联接（FH-CDMA） 在3 GHz 至 11 GHz
| Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - Frequency Hopping Code Division Multiple Access (FH-CDMA) - Point-to-multipoint systems in frequency bands in the range 3 GHz to 11 GHz
|
| EN 301277 V 1.1.1-1998
| 传输与多路复用技术（TM） 数字无线接力系统（DRRS） 使用同频道双极化（CCDP）操作的40MHz 无线电频率信
| Transmission and Multiplexing (TM) - Digital Radio Relay Systems (DRRS) - High capacity DRRS transmitting STM-4 or 4 * STM-1 in a 40 MHz radio frequency channel using Co-Channel Dual Polarized (CCDP) operation
|
| EN 301358 V 1.1.1.-1998
| 卫星地球站和系统（SES） 运行在19.7GHz至20.2 GHz （空间对地面）和29.5 GHz至30 GHz（地面对空间）频率
| Satellite Earth Station and Systems (SES) - Satellite User Terminals (SUT) using satellites in geostationary orbit operating in the 19,7 GHz to 20,2 GHz (space-to-earth) and 29,5 GHz to 30 GHz (earth-to-space) frequency bands
|
| EN 301359 V 1.1.1-1998
| 卫星地球站和系统（SES） 运行在11GHz至12 GHz （空间对地面）和29 GHz至30 GHz（地面对空间）频率波段范
| Satellite Earth Station and Systems (SES) - Satellite Interactive Terminals (SIT) using satellites in geostationary orbit operating in the 11 GHz to 12 GHz (space-to-earth) and 29 GHz to 30 GHz (earth-to-space) frequency bands
|
| EN 50065-1-2001
| 频率范围为3kHz至148.5kHz的低压电气设备的信号装置 第1部分：一般要求、频带和电磁干扰
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances
|
| EN 50065-2-1-2003
| 频率范围为3kHz-148.5kHz的低压电气设备的信号装置 第2-1部分：主通信设备频率范围为95kHz-148.5kHz以及计
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use i
|
| EN 50065-2-2-2003
| 频率范围为3kHz-148.5kHz的低压电气设备的信号装置 第2-2部分：主通信设备频率范围为95kHz-148.5kHz以及计
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use i
|
| EN 50065-2-3-2003
| 频率范围为3kHz-148.5kHz的低压电气设备的信号装置 第2-3部分：主通信设备频率范围为95kHz-148.5kHz以及计
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by el
|
| EN 50065-4-1-2001
| 频率范围为3kHz-148.5KHZ的低压电气设备的信号装置 低压去耦滤波器 总规范
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-1: Low voltage decoupling filters; Generic specification
|
| EN 50065-4-2-2001+A1-2003
| 频率范围为3kHz-148.5KHZ的低压电气设备的信号装置 第4-2部分：低压去耦滤波器 安全要求
| Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-2: Low-voltage decoupling filters; Safety requirements
|
| EN 50065-4-3-2003
| 频率范围为3kHz至148.5kHz的低压电气设备的信号 第4-3部分：低压去偶滤波器 输入滤波器
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-3: Low voltage decoupling filter; Incoming filter
|
| EN 50065-4-4-2003
| 频率范围为3kHz至148.5kHz的低压电气设备的信号装置 第4-4部分：低压去耦滤波器 阻抗滤波器
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter; Impedance filter
|
| EN 50065-4-5-2003
| 频率范围为3kHz至148.5kHz的低压电气设备的信号装置 第4-5部分：低压去耦滤波器 分割滤波器
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-5: Low voltage decoupling filter; Segmentation filter
|
| EN 50065-7-2001
| 频率范围为3kHz至148.5kHz的低压电气设备的信号装置 第7部分：设备阻抗
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance
|
| EN 50117-5-1997
| 电缆配电网络用同轴电缆 第5部分：用在频率在5MHz至2150MHz之间网络操作用室内分接电缆分规范
| Coaxial cables used in cabled distribution networks - Part 5: Sectional specification for indoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz
|
| EN 50117-6-1997
| 电缆配电网络用同轴电缆 第6部分：用于频率在5MHz-2150MHz之间网络操作用室外分接电缆分规范
| Coaxial cables used in cabled distribution networks - Part 6: Sectional specification for outdoor drop cables for use in networks operating at frequencies between 5 MHz and 2150 MHz |
| EN 50288-2-2-2001
| 电缆和数字通信和管理中用的多芯金属电缆 第2-2部分：特征频率达100 MHz屏蔽电缆的部分规范 工作区和中继
| Multi-element metallic cables used in analogue and digital communication and control - Part 2-2: Sectional specification for screened cables characterized up to 100 MHz; Work area and patch cord cables
|
| EN 50364-2001
| 人暴露于电子产品监督（EAS）、无线电频率识别（RFID）及类似用途使用的工作频率为 0 Hz-10 GHz装置产生的
| Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications
|
| EN 50384-2002
| 表示无线通讯系统的无线电基站及固定终端站和与人类暴露于无线电频率电磁场（110MHz至40GHz)相关的基本限制
| Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fiel
|
| EN 50385-2002
| 表示无线通讯系统的无线电基站及固定终端站和与人类暴露于无线电频率电磁场（110MHz至40GHz)相关的基本限制
| Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fiel
|
| EN 60051-4-1989
| 直接作用模拟指示电测量仪表及其附件 第4部分：频率表的特殊要求（IEC 60051-4:1984）
| Direct acting indicating analogue electrical measuring instruments and their accessories; Part 4: Special requirements for frequency meters (IEC 60051-4:1984)
|
| EN 60107-1-1997
| 电视广播传输接收机的测量方法 第1部分：一般要求 广播和电视频率显示的测量
| Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies (IEC 60107-1:1997)
|
| EN 60130-17-1999
| 频率低于3MHz的连接器 第17部分：可充电电池用可多向插合的互连器件的详细规范
| Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries (IEC 60130-17:1998)
|
| EN 60130-9-2000
| 频率低于3MHz的连接器 第9部分：无线电及相关音响设备用圆形连接器
| Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment (IEC 60130-9:2000)
|
| EN 60255-22-7-2003
| 电动继电器 第22-7部分：用于测量继电器和保护设备的电气干扰试验 动力频率抗扰度试验
| Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment; Power frequency immunity tests (IEC 60255-22-7:2003) / Note: Endorsement notice
|
| EN 60404-6-2003
| 磁性材料 第6部分：用环形样品在频率为20 Hz 至200 kHz的范围内测量磁性软金属和金属粉末磁性的方法
| Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens (IEC 60404-6:2003) / Note: Endorsement notice
|
| EN 60444-1-1997+A1-1999
| 用π型网络零相位技术测量石英晶体元件参数 第1部分：用π型网络零相位技术测量石英晶体元件的谐振频率和
| Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a pi-network (IEC 60444-1:
|
| EN 60444-3-1997
| 用π型网络零相位技术测量石英晶体元件参数 第3部分：利用有并联电容Co补偿的π型网络相位技术测量频率达2
| Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 3: Basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a pi-network with compensation of the parallel capacitance co (IEC 60444-3:1986)
|
| EN 60444-4-1997
| 用π型网络零相技术测量石英晶体元件参数 第4部分：负载谐振频率fL.负载谐振电阻RL的测量方法及其他导出q
| Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 4: Method for the measurement of the load resonance frequency fL,load resonance resistance RL and the calculation of other derived values of q
|
| EN 60510-2-5-1994
| 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第5节：频率调频器
| Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section 5: Frequency modulators (IEC 60510-2-5:1992)
|
| EN 60510-2-6-1994
| 卫星地面站用无线电设备的测量方法 第2部分：.分系统的测量 第6节：.频率解调器
| Methods of measurement for radio equipment used in satellite earth stations - Part 2: Measurements for sub-systems - Section 6: Frequency demodulators (IEC 60510-2-6:1992)
|
| EN 60603-1-1998
| 印制板用频率低于3MHz的连接器 第１部分：通用规范 带有评估的质量的详细规范的制订指南和通用要求
| Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality (IEC 60603-1:1991 + A1:1992)
|
| EN 60603-10-1998
| 印制板用频率低于3MHz的连接器 第１０部分：倒置型2.54mm(0.1in)基本网格印制电路板用两对端连接器
| Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type (IEC 60603-10:1991)
|
| EN 60603-12-1998
| 印制板用频率低于3MHz的连接器 第12部分：为集成电路用的插座尺寸、一般要求和试验的详细规范
| Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits (IEC 60603-12:1992)
|
| EN 60603-13-1998
| 印制电路板用频率低于3MHz的连接器 第13部分：不易卸绝缘可置换终端用带独立连接器的2.54mm(0.1in)基本网
| Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation disp
|
| EN 60603-14-1999
| 印制板用频率低于3MHz的连接器 第14部分：象音频、视频和视听设备一样的低频声音和视频信号用环形连接器的
| Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment (IEC 60603-14:1998)
|
| EN 60603-2-1998
| 印制板用频率低于3MHz的连接器 第2部分：共有固定特性的2.54mm(0.1in)基本网格的印制板用的评定质量的两部
| Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features (IEC 60603-2:1995)
|
| EN 60603-3-1998
| 印制板用频率低于3MHz的连接器 第３部分：触点中心相隔距离和交错线端子相隔距离均为2.54mm(0.100in)的印
| Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2.54 mm (O.1 in) centres and staggered terminations at that same spacing (IEC 60603-3:1987)
|
| EN 60603-4-1998
| 印制板用频率低于3MHz的连接器 第4部分：触点中心相隔距离和交错线端子相隔距离均为1·91mm(0·75in)的印
| Connectors for frequencies below 3 MHz for use with printed boards - Part 4: Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing (IEC 60603-4:1987)
|
| EN 60603-5-1998
| 印制板用频率低于3MHz的连接器 第5部分：有2.54mm(0.10in)间隔的两面印制电路板用边缘插接器和两对端连接
| Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing (IEC 60603-5:1987)
|
| EN 60603-6-1998
| 印制板用频率低于3MHz的连接器 第6部分：标称厚度为1.6mm(0.063in)单面或双面印制板用间隔距离为2·54mm(0
| Connectors for frequencies below 3 MHz for use with printed boards - Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness (IEC 6
|
| EN 60603-7-1-2002
| 用于印制电路板的3MHz以下频率连接器 第7－１部分：有质量评定的具通用插合特 性包括固定和自由连接器的8
| Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded free and fixed connectors with common mating features, with assessed quality (IEC 60603-7-1:2002) / Note: Endorsement notice
|
| EN 60603-7-1997
| 用于印制电路板的3MHz以下频率连接器 第7部分：有质量评定的具通用插合特 性包括固定和自由连接器的8位连
| Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality (IEC 60603-7:1996)
|
| EN 60603-7-7-2002
| 电子设备连接器 第7-7部分：数据传输频率达 600 MHz (第 7种、 屏蔽式) 的8道、屏蔽式、活动和固定连接器
| Connectors for electronic equipment - Part 7-7: Detail specification for 8 way, shielded, free and fixed connectors, for data transmissions with frequencies up to 600 MHz (category 7, shielded) (IEC 60603-7-7:2002) / Note: Endorsement notice
|
| EN 60603-7/prA1-1998
| 用于印制电路板的3MHz以下频率连接器 第7部分：有质量评定的具通用插合特 性包括固定和自由连接器的8位连
| Amendment to IEC 60603-7: Detail specification for 8 way connectors, with assessed quality, including fixed and free connectors with common mating features - Test methods and related requirements for use at frequencies up to 100 MHz
|
| EN 60603-8-1998
| 印制板用频率低于3MHz的连接器 第8部分：具有0.63mm×0.63mm方形插头的2.54mm(0.1in)基本网格印制电路板用
| Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Two-part connectors for printed boards, for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm x 0,63 mm (IEC 60603-8:1990)
|
| EN 60603-9-1998
| 印制板用频率低于3MHz的连接器 第９部分：2.54mm(0.1in)基本网格印制电路板、底板和电缆连接器用两对端连
| Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in) (IEC 60603-9:1990)
|
| EN 60747-16-3-2002
| 半导体器件 第16-3部分：微波集成电路 频率转换器
| Semiconductor devices - Part 16-3: Microwave integrated circuits; Frequency converters (IEC 60747-16-3:2002) / Note: Endorsement notice
|
| EN 60749-12-2002
| 半导体器件 机械和气候试验方法 第12部分：振动、振动频率
| Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibrations, variable frequency (IEC 60749-12:2002) / Note: Endorsement notice
|
| EN 60966-2-4-2003
| 射频与同轴电缆组件 第2-4部分：无线电和电视接收机用电缆部件详细规范（频率范围0至3000MHz的IEC60169-2
| Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-2 connectors (IEC 60966-2-4:2003) / Note: Endorsement notice
|
| EN 60966-2-5-2003
| 射频和同轴电缆组件 第2-5部分：无线电和电视接收机用电缆组件的详细规格 频率范围在0至1000 MHz
| Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 1000 MHz, IEC 60169-2 connectors (IEC 60966-2-5:2003) / Note: Endorsement notice
|
| EN 60966-2-6-2003
| 射频和同轴电缆组件 第2-6部分：电视和无线电接收机用电缆组件的详细规格 频率范围在0至3000 MHz,IEC 601
| Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers; Frequency range 0 to 3000 MHz, IEC 60169-24 connectors (IEC 60966-2-6:2003) / Note: Endorsement notice
|
| EN 61000-4-16-1998
| 电磁兼容性(EMC) 第4-16部分：试验和测量技术 对频率在0-150kHz范围内的传导共模骚扰的抗扰试验
| Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998)
|
| EN 61000-4-28-2000
| 电磁兼容性（ＥＭＣ）第4-28部分：试验和测量技术 电力频率变化抗扰度试验
| Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test (IEC 61000-4-28:1999)
|
| EN 61000-4-3-2002+A1-2002
| 电磁兼容性(EMC) 第4-3部分：试验和测量技术 辐射,辐射频率和电磁场抗扰试验
| Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2002)
|
| EN 61076-3-104-2003
| 电子设备用连接器 第3-104部分：矩形连接器 数据传输频率在600 MHz以内的8向非屏蔽固定式连接器的详细规
| Connectors for electronic equipment - Part 3-104: Rectangular connectors; Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 600 MHz minimum (IEC 61076-3-104:2003) / Note: Endorsement notice
|
| EN 61101-1993
| 0.5MHz至15MHz频率范围内采用平面扫描技术对水听器的绝对校准
| The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz (IEC 61101:1991)
|
| EN 61102-1993+A1-1994
| 0.5MHz至15MHz频率范围内用水听器测量和表征超声场
| Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz (IEC 61102:1991)
|
| EN 61161-1994+A1-1998
| 0.5MHz至25MHz频率范围内液体中超声波功率的测量
| Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz (IEC 61161:1992)
|
| EN 61220-1995
| 超声学声场 0.5MHz至15MHz频率范围内用水听器测量和表征医疗超声设备产生的超声场的指南
| Ultrasonics - Fields - Guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz (IEC 61220:1993)
|
| EN 61240-1997
| 压电器件 频率控制和选择用表面安装器件外形图制备 总则
| Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - General rules (IEC 61240:1994)
|
| EN 61566-1997
| 射频电磁场辐照测量 频率范围从100kHz至1GHz间的场强
| Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz (IEC 61566:1997)
|
| EN 61689-1996
| 超声学 理疗装置 0.5MHz至5MHz频率范围内的性能要求和测量方法
| Ultrasonics - Physiotherapy systems - Performance requirements and methods of measurement in the frequency range 0,5 MHz to 5 MHz (IEC 61689:1996)
|
| EN 61788-7-2002
| 超导体 第7部分：电子特性测量 微波频率下超导体的表面电阻
| Superconductivity - Part 7: Electronic characteristic measurements; Surface resistance of superconductors at microwave frequencies (IEC 61788-7:2002)
|
| EN 61837-1-1999
| 频率控制和选择用表面安装的压电器件 标准外形和端头连接 第1部分：塑料模压外壳外形
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines (IEC 61837-1:1999)
|
| EN 61837-2-2000
| 频率控制和选择用表面安装的压电器件 标准外形和端头连接 第2部分：陶瓷外壳
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures (IEC 61837-2:2000)
|
| EN 61837-3-2000
| 频率控制和选择用表面安装的压电器件 标准外形和端头连接 第3部分：金属外壳
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures (IEC 61837-3:2000)
|
| EN 62092-2001
| 超声学 水听器 15 MHz至40 MHz频率范围内的特性和校准
| Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz (IEC 62092:2001)
|
| EN 62106-2001
| 频率范围为87.5至108.0 MHz 的 VHF/FM 声音广播用无线电数据系统的规范
| Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz (IEC 62106:2000)
|
| EN ISO 266-1997
| 声学 优先频率
| Acoustics - Preferred frequencies (ISO 266:1997)
|
| EN ISO 389-5-1999
| 声学 校正听力设备的基准零级 第5部分：8kHz－16kHz频率范围内的纯音的等效阈声压级
| Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz (ISO/TR 389-5:1998)
|
| EN ISO 8318-2002
| 包装 满装的运输包装和单元货物 用振动频率作正弦振动试验
| Packaging - Complete, filled transport packages and unit loads - Sinusoidal vibration tests using a variable frequency (ISO 8318:2000)
|
| HD 236.4 S2-1978
| 无线电发射机测量方法 第4部分：无线电话和声音广播用发射机振幅/频率特性和非线性畸变 第1次补充：第3节
| Methods of measurement for radio transmitters-Part 4: Amplitude/frequency characteristics and non-linearity distortion in transmitters for radiotelephony and sound broadcasting-First supplement: Section three
|
| HD 467.1.2 S1-1986
| 卫星地面站用无线电设备的测量方法 第1部分：子系统和子系统组合的通用测量 第2节：无线电频率范围内的测
| Methods of measurement for radio equipment used in satellite earth stations - Part 1: Measurements common to sub-systems and combinations of sub-systems - Section 2: Measurements in the r.f. range
|
| HD 477.2.4 S1-1987
| 地面无线电中继系统用设备的测量方法 第2部分：子系统测量 第4节：频率调节器
| Methods of measurement for equipment used in terrestrial radio-relay systems - Part 2: Measurements for sub-systems - Section 4: Frequency modulators
|
| HD 477.2.5 S1-1987
| 地面无线电中继系统用设备的测量方法 第2部分：子系统测量 第5节：频率解调器
| Methods of measurement for equipment used in terrestrial radio-relay systems - Part 2: Measurements for sub-systems - Section 5: Frequency demodulators
|
| HD 95.1 S1-1979
| 在30 MHz 至1 GHz 频率范围内接收声音和电视广播用天线 第1部分：电特性和机械特性
| Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz-part 1: Electrical and mechanical characteristics
|
| HD 95.2 S2-1979
| 在30 MHz 至1 GHz 频率范围内接收声音和电视广播用天线 第2部分：电性能参数的测量方法
| Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz-part 2: Methods of measurement of electrical performance parameters
|
| HD 95.3 S1-1984
| 在30 MHz 至1 GHz 频率范围内接收声音和电视广播用天线 第3部分：机械性能、振动和环境试验的测量方法
| Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz-part 3: Methods of measurement of mechanical properties, vibration and environmental tests
|
| HD 95.4 S1-1986
| 在30 MHz 至1 GHz 频率范围内接收声音和电视广播用天线 第4部分：天线性能规范制定指南 详细规范图表格式
| Aerials for the reception of sound and television broadcasting in the frequency range 30 MHz to 1 GHz-part 4: Guide for the preparation of aerial performance specifications; detailed specification sheet format
|
| prEN 122000-1993
| 通用规范：无线电频率同轴连接器(第I、II、III部分)
| Generic specification: radio frequency coaxial connectors (parts I, II and III) (CECC 22000:1992)
|
| prEN 14146-2003
| 天然石材试验方法 动态弹性模量的测定（用基本共振频率测定法）
| Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency)
|
| prEN 175301-1992
| 样本详细规范/空白详细规范：频率在3MHz以下的矩形连接器
| Example detail specification/blank detail specification: rectangular connectors for frequencies below 3 MHz
|
| prEN 50065-2-1994
| 频率范围为3kHz-148.5kHz的低压电气设备的信号机 第2部分：抗干扰性
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz; part 2: immunity from interference
|
| prEN 50065-4-1993
| 频率范围为3kHz-148.5kHz的低压电气设备的信号装置 第4部分：室内和室外电网络接口处的滤波器
| Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz; part 4: filters at the interface of the indoor and outdoor electricity network
|
| prEN 60603-7-3-1998
| 用于印制电路板的3MHz以下频率连接器 第7－３部分
| IEC 60603-7: Inclusion of shield mating in IEC 60603-7
|
| prEN 60603-7-4-2003
| 电气设备接头 第7-4部分：用于数据传输频率高达 250 MHz (第 6类, 未屏蔽)的8道活动和固定接头的技术规范
| IEC 60603-7-4, Ed. 1.0: Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
|
| prEN 60989-1994
| 单独变压器 自藕变压器、可变频率变压器和电抗器
| Separating transformers, autotransformers, variable transformers and reactors (IEC 60989:1991, modified)
|
| 编号 | 中文名称 | 英文名称 |
|---|