| 编号 | 中文名称 | 英文名称 |
|---|
| IEC 60050-561 AMD 1-1995
| 国际电工词汇 第561章:频率控制与选择用压电器件 第561-06节:表面声波滤波器 修改1
| International Electrotechnical Vocabulary - Chapter 561: Piezoelectric devices for frequency control and selection - Section 561-06: Surface acoustic wave filters; Amendment 1
|
| IEC 60050-561 AMD 2-1997
| 国际电工词汇.第561章:频率控制和选择用压电器件.第561-07节:表面声波设备的特性.修改件2
| International Electrotechnical Vocabulary - Chapter 561: Piezoelectric devices for frequency control and selection - Section 561-07: Characteristics of surface acoustic wave (saw) devices; Amendment 2
|
| IEC 60050-561-1991
| 国际电工词汇 第561章:频率控制和选择用压电器件
| International electrotechnical vocabulary; chapter 561: piezoelectric devices for frequency control and selection
|
| IEC 60051-4-1984
| 直接作用模拟指示电测量仪表及其附件 第4部分:频率表的特殊要求
| Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4 : Special requirements for frequency meters
|
| IEC 60107-1-1997
| 电视广播传输接收机的测量方法 第1部分:一般要求 广播和电视频率显示的测量
| Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements on displays at radio and video frequencies
|
| IEC 60122-2-1 AMD 1-1993
| 频率控制和选择用石英晶体元件 第2部分:频率控制和选择用石英晶体元件使用指南 第1节:微处理器钟用石英晶体
| Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; section 1: quartz crystal units for microprocessor clock supply
|
| IEC 60122-2-1-1991
| 频率控制和选择用石英晶体元件 第2部分:频率控制和选择用石英晶体元件使用指南 第1节:微处理器时钟用石英晶
| Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; section 1: quartz crystal units for microprocessor clock supply
|
| IEC 60122-2-1983
| 频率控制和选择用石英晶体元件 第2部分:频率控制和选择用石英晶体元件使用指南
| Quartz crystal units for frequency control and selection. Part 2 : Guide to the use of quartz crystal units for frequency control and selection
|
| IEC 60130-10-1971
| 频率低于3MHz的连接器 第10部分:便携式娱乐设备对外接低压电源用连接器
| Connectors for frequencies below 3 MHz. Part 10 : Connectors for coupling an external low-voltage power supply to portable entertainment equipment
|
| IEC 60130-12-1976
| 频率低于3MHz的连接器 第12部分:电路连接和试验用连接器
| Connectors for frequencies below 3 MHz. Part 12 : Link and test connectors
|
| IEC 60130-16-1976
| 频率低于3MHz的连接器 第16部分:双列印制线路板连接器,其接触件及其引出端间距为2.54mm(0.1 in)
| Connectors for frequencies below 3 MHz. Part 16 : Printed circuit board mounted connectors with two rows of staggered contacts and terminations with spacing of 2.54 mm (0.1 in)
|
| IEC 60130-17-1998
| 频率低于3MHz的连接器 第17部分:可充电电池用可多向插合的互连器件的详细规范
| Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries
|
| IEC 60130-2 AMD 1-1969
| 频率低于3MHz的连接器 第2部分:无线电接收机及相关音响设备用连接器 修改1
| Connectors for frequencies below 3 MHz. Part 2 : Connectors for radio receivers and associated sound equipment
|
| IEC 60130-2-1965
| 频率低于3MHz的连接器 第2部分:无线电接收机及相关音响设备用连接器
| Connectors for frequencies below 3 MHz. Part 2 : Connectors for radio receivers and associated sound equipment
|
| IEC 60130-3-1965
| 频率低于3MHz的连接器 第3部分:电池组连接器
| Connectors for frequencies below 3 MHz. Part 3 : Battery connectors
|
| IEC 60130-4-1966
| 频率低于3MHz的连接器 第4部分:螺纹连接多接触件圆形连接器
| Connectors for frequencies below 3 MHz. Part 4 : Circular multipole connectors with threaded coupling
|
| IEC 60130-4A-1970
| 频率低于3MHz的连接器 第4部分:螺纹连接多接触件圆形连接器 补充1
| Connectors for frequencies below 3 MHz. Part 4 : Circular multipole connectors with threaded coupling.
|
| IEC 60130-5-1966
| 频率低于3MHz的连接器 第5部分:刀形多接触件矩形连接器
| Connectors for frequencies below 3 MHz. Part 5 : Rectangular multipole connectors with blade contacts
|
| IEC 60130-6-1965
| 频率低于3MHz的连接器 第6部分:小型刀形多接触件矩形连接器
| Connectors for frequencies below 3 MHz. Part 6 : Rectangular miniature multipole connectors with blade contacts
|
| IEC 60130-7-1971
| 频率低于3MHz的连接器 第7部分:卡口或推拉式多接触件圆形连接器
| Connectors for frequencies below 3 MHz. Part 7 : Circular multipole connectors with bayonet or push-pull coupling
|
| IEC 60130-8-1976
| 频率低于3MHz的连接器 第8部分:无线电设备中音频线路用同心连接器
| Connectors for frequencies below 3 MHz. Part 8 : Concentric connectors for audio circuits in radio receivers
|
| IEC 60130-9-2000
| 频率低于3MHz的连接器 第9部分:无线电及相关音响设备用圆形连接器
| Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment
|
| IEC 60169-26-1993
| 射频连接器 第26部分:螺纹连接射频同轴连接器 特性阻抗50Ω 频率范围0-18Hz(TNC18GHz型)
| Radio-frequency connectors; part 26: R.F. coaxial connectors with screw coupling; characteristic impedance 50 ohms; frequency range 0 to 18 GHz (type TNC 18 GHz)
|
| IEC 60196-1965
| IEC标准频率
| I E C standard frequencies
|
| IEC 60244-6-1976
| 无线电发射机的测量方法 第6部分:在130KHz-1GHz频率范围内的机箱辐射
| Methods of measurement for radio transmitters. Part 6 : Cabinet radiation at frequencies between 130 kHz and 1 GHz
|
| IEC 60244-7-1979
| 无线电发射机的测量方法 第7部分:在1GHz以上频率的机箱辐射
| Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1 GHz
|
| IEC 60244-7A-1980
| 无线电发射机的测量方法 第7部分:在1GHz以上频率的机箱辐射 补充1:第4节:中型发射机 第5节:大型发射机
| Methods of measurement for radio transmitters. Part 7 : Cabinet radiation at frequencies above 1 GHz. First supplement: Sections four and five: Medium-sized and large transmitters
|
| IEC 60255-22-7-2003
| 电气继电器.第22-7部分:量度继电器和保护装置的电气干扰试验.电源频率抗扰试验
| Electrical relays - Part 22-7: Electrical disturbance tests for measuring relays and protection equipment; Power frequency immunity tests
|
| IEC 60263-1982
| 绘制频率特性和极坐标图用的标度和尺寸
| Scales and sizes for plotting frequency characteristics and polar diagrams
|
| IEC 60377-1-1973
| 绝缘材料在300MHz以上频率下介电性能测定方法 第1部分:总则
| Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 1 : General
|
| IEC 60377-2-1977
| 绝缘材料在300MHz以上频率下介电性能测定方法 第2部分:谐振法
| Methods for the determination of the dielectric properties of insulating materials at frequencies above 300 MHz. Part 2 : Resonance methods
|
| IEC 60404-6-2003
| 磁性材料.第6部分:使用环形试样的频率范围在20至200kHz的软磁金属材料和粉末材料磁性能的测量方法
| Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens
|
| IEC 60444-1 AMD 1-1999
| 用π型网络零相位技术测量石英晶体元件参数 第1部分:用π型网络零相位技术测量石英晶体元件的谐振频率和谐
| Measurement of quartz crystal unit parameters by zero phase technique in a -network - Part 1: Basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network; Amendment 1
|
| IEC 60444-1-1986
| 用π型网络零相位技术测量石英晶体元件参数 第1部分:用π型网络零相位技术测量石英晶体元件的谐振频率和谐
| Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 1: basic method for the measurement of resonance frequency and resonance resistance of quartz crystal units by zero phase technique in a -network
|
| IEC 60444-4-1988
| 用π型网络的零相位技术测量石英谐振器参数.第4部分:石英晶体元件负荷谐振频率fl、负荷谐振电阻Rl的测量方
| Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 4: method for the measurement of the load resonance frequency FL load resonance resistance RL and the calculation of other derived values of quartz crystal units, up to 30 MHz
|
| IEC 60444-7-2004
| 石英晶体元件参数的测量.第7部分:石英晶体元件的放射性和频率下降测量
| Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units
|
| IEC 60487-2-4-1984
| 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第4节:频率调制器
| Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Four - Frequency modulators
|
| IEC 60487-2-5-1984
| 地面无线电中继系统所用设备的测量方法 第2部分:分系统测量 第5节:频率调制器
| Methods of measurement for equipment used in terrestrial radio-relay systems. Part 2 : Measurements for sub-systems. Section Five - Frequency demodulators
|
| IEC 60510-2-5-1992
| 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第5节:频率调制器
| Methods of measurement for radio equipment used in satellite earth stations; part 2: measurement for sub-systems; section 5: frequency modulators
|
| IEC 60510-2-6-1992
| 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第6节:频率解调器
| Methods of measurement for radio equipment used in satellite earth stations; part 2: measurement for sub-systems; section 6: frequency demodulators
|
| IEC 60510-3-2-1980
| 卫星地面站用无线电设备的测量方法 第3部分:分系统组合测量方法 第2节:频率范围为4GHz～6GHz的接收系统品质
| Methods of measurement for radio equipment used in satellite earth stations. Part 3: Methods of measurement on combinations of sub-systems. Section Two: Measurement of the figure of merit (G/T) of the receiving system in the 4 GHz to 6 GHz range
|
| IEC 60556-2006
| 用于微波频率的旋磁材料.性能的测量方法
| Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties
|
| IEC 60603-1 AMD 1-1992
| 印制板用频率低于3MHz的连接器 第1部分:总规范 具有评定质量的详细规范的总要求和编写指南 修改1
| Connectors for frequencies below 3 MHz for use with printed boards; part 1: generic specification; general requirements and guide for the preparation of detail specifications, with assessed quality; amendment 1
|
| IEC 60603-1-1991
| 印制板用频率低于3MHz的连接器 第1部分:总规范 一般要求和带有质量评定的连接器详细规范的编写指南
| Connectors for frequencies below 3 MHz for use with printed boards; part 1: generic specification; general requirements and guide for the preparation of detail specifications, with assessed quality
|
| IEC 60603-10-1991
| 印制板用频率低于3MHz的连接器 第10 部分:反装型基本网格为2.54 mm (0.1 in)的印制板用两件式连接器
| Connectors for frequencies below 3 MHz for use with printed boards; part 10: two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
|
| IEC 60603-11-1992
| 印制板用频率低于3MHz的连接器 第11部分:同轴连接器详细规范(自由连接器和固定连接器尺寸)
| Connectors for frequencies below 3 MHz for use with printed boards; part 11: detail specification for concentric connectors (dimensions for free connectors and fixed connectors)
|
| IEC 60603-12-1992
| 印制板用频率低于3MHz的连接器 第12部分:集成电路用系列插座的尺寸、一般要求和试验的详细规范
| Connectors for frequencies below 3 MHz for use with printed boards; part 12: detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
|
| IEC 60603-13-1995
| 印制板用频率低于3MHz的连接器 第13部分:有质量评定的和不可接触绝缘位移接端(ID)自由连接器、基本网格为2.
| Connectors for frequencies below 3 MHz for use with printed boards - Part 13: Detail specification for two-part connectors of assessed quality, for printed boards for basic grid of 2,54 mm (0,1 in), with free connectors for non-accessible insulation displacement terminations (ID)
|
| IEC 60603-14-1998
| 印制板用频率低于3MHz的连接器 第14部分:音频、视频和音像设备用低音频及视频圆形连接器详细规范
| Connectors for frequencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
|
| IEC 60603-2 AMD 1-2000
| 印制板用频率低于3MHz的连接器 第2部分:有质量评定和具有通用普通安装特性、基本网格为2.54 mm (0.1in)的印
| Connectors for frequencies below 3 MHs for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features; Amendment 1
|
| IEC 60603-2-1995
| 印制板用频率低于3MHz的连接器 第2部分:有质量评定和具有通用普通安装特性、基本网格为2.54 mm (0.1 in)的
| Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
|
| IEC 60603-3-1987
| 印制板用频率低于3MHz的连接器 第3部分:具有接触件中心间距为2.54 mm (0.100 in)及以同样间距交错排列接端
| Connectors for frequencies below 3 MHz for use with printed boards. Part 3 : Two-part connectors for printed boards having contacts spaced 2.54 mm (O.100 in) centres and staggered terminations at that same spacing
|
| IEC 60603-4-1987
| 印制板用频率低于3MHz的连接器 第4部分:具有接触件中心间距为1.91 mm (0.075 in)及以同样间距交错排列接端
| Connectors for frequencies below 3 MHz for use with printed boards. Part 4 : Two-part connectors for printed boards having contacts spaced at 1.91 mm (0.075 in) centres and staggered terminations at that same spacing
|
| IEC 60603-5-1987
| 印制板用频率低于3MHz的连接器 第5部分:间距为2.54 mm (0.1 in)双面印制板用的边缘插座连接器和两件式连接
| Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (O.1 in) spacing
|
| IEC 60603-6-1987
| 印制板用频率低于3MHz的连接器 第6部分:标称厚度为1.6 mm (0.063 in)单面或双面印制板用接触件间距为2.54 m
| Connectors for frequencies below 3 MHz for use with printed boards. Part 6: Edge-socket connectors and printed board connectors with 2.54 mm (0.1 in) contact spacing for single or double-sided printed boards of 1.6 mm (0.063 in) nominal thickness.
|
| IEC 60603-7-1996
| 印制板用频率低于3MHz的连接器 第7部分:有质量评定的具有通用插合特性包括固定和自由连接器的8位连接器详细
| Connectors for frequencies below 3 MHz for use with printed boards - Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality
|
| IEC 60603-7-4-2005
| 电子设备连接器.第7-4部分:数据传输频率250MHZ及以下的8位非屏蔽自由和固定连接器的详细规范
| Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz
|
| IEC 60603-7-7-2006
| 电子设备用连接器.第7-7部分:有最大频率为600MHz的数据传输用8路屏蔽的固定和自由连接器的详细规范
| Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz
|
| IEC 60603-8-1990
| 印制板用频率低于3MHz的连接器 第8部分:具有0.63 mm×0.63 mm的方形阳接触件基本网格为2.54 mm (0.1 in)的
| Connectors for frequencies below 3 MHz for use with printed boards; part 8: two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), with square male contacts of 0,63 mm × 0,63 mm
|
| IEC 60603-9-1990
| 印制板用频率低于3MHz的连接器 第9部分:基本网格为2.54 mm (0.1 in)的印制板、底板和电缆连接器用两件式连
| Connectors for frequencies below 3 MHz for use with printed boards; part 9: two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
|
| IEC 60642 AMD 1-1992
| 频率控制和选择用压电陶瓷谐振子和谐振器 第1章:标准值和条件 第2章:测量和试验条件 修改1
| Piezoelectric ceramic resonators and resonator units for frequency control and selection; chapter 1: standard values and conditions; chapter 2: measuring and test conditions; amendment 1
|
| IEC 60642-1979
| 频率控制和选择用压电陶瓷谐振子和谐振器 第1章:标准值和条件 第2章:测量和试验条件
| Piezoelectric ceramic resonators and resonator units for frequency control and selection. Chapter I: Standard values and conditions. Chapter II: Measuring and test conditions
|
| IEC 60747-16-2-2001
| 半导体器件 第16-2部分：微波集成电路 频率预定标器
| Semiconductor devices - Part 16-2: Microwave integrated circuits; Frequency prescalers
|
| IEC 60747-16-3-2002
| 半导体器件.第16-3部分:微波集成电路.频率变压器
| Semiconductor devices - Part 16-3: Microwave integrated circuits; Frequency converters
|
| IEC 60749-12 Corrigendum 1-2003
| 半导体器件.机械和气候试验方法.第12部分:振动、可变频率
| Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency
|
| IEC 60749-12-2002
| 半导体器件.机械和气候试验方法.第12部分: 振动,可变频率
| Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency
|
| IEC 60807-1-1991
| 频率低于3MHz的矩形连接器 第1部分:总规范 一般要求和有质量评定要求的连接器详细规范的编写指南
| Rectangular connectors for frequencies below 3 MHz; part 1: generic specification; general requirements and guide for the preparation of detail specifications for connectors with assessed quality
|
| IEC 60807-2 AMD 1-1996
| 频率低于3MHz的矩形连接器 第2部分:具有梯形金属外壳和圆形锡焊型接触件的有质量评定要求的系列连接器的详
| Rectangular connectors for frequencies below 3 MHz - Part 2: Detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types; Amendment 1
|
| IEC 60807-2-1992
| 频率低于3MHz的矩形连接器 第2部分:具有梯形金属外壳和圆形锡焊型接触件的有质量评定要求的系列连接器详细
| Rectangular connectors for frequencies below 3 MHz; part 2: detail specification for a range of connectors, with assessed quality, with trapezoidal shaped metal shells and round contacts; fixed solder contact types
|
| IEC 60807-3-1990
| 频率低于3MHz的矩形连接器 第3部分:具有梯形金属外壳和圆形接触件的系列连接器详细规范 具有封闭式接筒的后
| Rectangular connectors for frequencies below 3 MHz; part 3: detail specification for a range of connectors with trapezoidal shaped metal sheels and round contacts; removable crimp contact types with closed crimp barrels, rear insertion/rear extraction
|
| IEC 60807-6-1988
| 频率低于3MHz的矩形连接器 第6部分:具有定位导向件的20号(7.5A)圆形接触件的系列矩形连接器详细规范 固定锡
| Rectangular connectors for frequencies below 3 MHz. Part 6: Detail specification for a range of rectangular connectors with size 20 (7,5A) round contacts having polarized guides - Fixed solder contact types
|
| IEC 60807-7-1991
| 频率低于3MHz的矩形连接器 第7部分:具有定位导向件或插拔锁紧螺杆和16号(13A)圆形接触件的系列连接器详细规
| Rectangular connectors for frequencies below 3 MHz; part 7: detail specification for a range of connectors with polarized guides or jackscrews and size 16 (13 A) round contacts; removable crimp contact types with closed crimp barrels, rear insertion/front release, with assessed quality
|
| IEC 60807-8-1992
| 频率低于3MHz的矩形连接器 第8部分:具有4个信号接触件和电缆屏蔽用接地接触件的连接器详细规范
| Rectangular connectors for frequencies below 3 MHz; part 8: detail specification for connectors, four-signal contacts and earthing contacts for cable screen
|
| IEC 60807-9-1993
| 频率低于3MHz的矩形连接器 第9部分:电视机用系列连接器详细规范
| Rectangular connectors for frequencies below 3 MHz; part 9: detail specification for a range of peritelevision connectors
|
| IEC 60866-1987
| 工作在0.50～15MHz频率范围内的水听器的特性和校准
| Characteristics and calibration of hydrophones for operation in the frequency range O.5 MHz to 15 MHz
|
| IEC 61000-4-16 AMD 1-2001
| 电磁兼容性(EMC) 第4-16部分:试验和测量技术 对频率在0～150KHz范围内的传导共模骚扰的抗扰度试验 修改1
| Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz; Amendment 1
|
| IEC 61000-4-16 Edition 1.1-2002
| 电磁兼容性(EMC).第4-16部分:试验和测量技术.0 Hz-150 KHz频率范围的普通模块导电抗扰试验
| Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz
|
| IEC 61000-4-16-1998
| 电磁兼容性(EMC) 第4-16部分:试验和测量技术 对频率在0～150KHz范围内的传导共模骚扰的抗扰度试验
| Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz
|
| IEC 61000-4-28 AMD 1-2001
| 电磁兼容性(EMC) 第4-28部分:试验和测量技术 电力频率变化、抗扰度试验 修改1
| Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques; Variation of power frequency, immunity test; Amendment 1
|
| IEC 61000-4-28 Edition 1.1-2002
| 电磁兼容性(EMC).第4-28部分:试验和测量技术.电源频率变化和抗扰试验
| Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques; Variation of power frequency, immunity test
|
| IEC 61000-4-28-1999
| 电磁兼容性(EMC) 第4-28部分:试验和测量技术 电力频率变化、抗扰度试验
| Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test
|
| IEC 61000-4-8 Edition 1.1-2001
| 电磁兼容性.第4-8部分:试验和测量方法.电源频率磁场抗扰试验
| Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques; Power frequency magnetic field immunity test
|
| IEC 61094-6-2004
| 测量传声器.第6部分:频率响应的测定用静电致动器
| Measurement microphones - Part 6: Electrostatic actuators for determination of frequency response
|
| IEC 61101-1991
| 0.5MHz～15MHz频率范围内采用平面扫描技术对水听器的绝对校准
| The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHz to 15 MHz
|
| IEC 61102 AMD 1-1993
| 0.5MHz～15MHz频率范围内用水听器测量和表征超声场 修改1
| Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz; amendment 1
|
| IEC 61102-1991
| 0.5MHz～15MHz频率范围内用水听器测量和表征超声场
| Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0,5 MHz to 15 MHz
|
| IEC 61161 Edition 1.1-1998
| 频率范围在0,5MHZ到25MHZ的液体中超声电力测量
| Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz
|
| IEC 61161-1998
| 0.5MHz～25MHz频率范围内液体中超声波功率测量
| Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz
|
| IEC 61240-1994
| 压电器件 频率控制和选择用表面安装器件外形图制备 总则
| Piezoelectric devices - Preparation of outline drawings of surface-mounted devices (SMD) for frequency control and selection - Genral rules
|
| IEC 61338-1-4-2005
| 波导型介电谐振器.第1-4部分:一般信息和试验条件.毫米波频率时介电谐振器材料的相对复介电常数测量方法
| Waveguide type dielectric resonators - Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency
|
| IEC 61566-1997
| 射频电磁场辐照测量 频率范围从100kHz～1GHz间的场强
| Measurement of exposure to radio-frequency electromagnetic fields - Field strength in the frequency range 100 kHz to 1 GHz
|
| IEC 61689-1996
| 超声学 理疗装置 0.5MHz～5MHz频率范围内的性能要求和测量方法
| Ultrasonics - Physiotherapy systems - Performance requirements and methods of measurement in the frequency range 0,5 MHz to 5 MHz
|
| IEC 61788-7-2002
| 超导性.第7部分:电特性测量.微波频率下超导体的表面电阻
| Superconductivity - Part 7: Electronic characteristic measurements; Surface resistance of superconductors at microwave frequencies
|
| IEC 61837-1-1999
| 频率控制和选择用表面安装的压电器件 标准外形和端头连接 第1部分:塑料模压外壳外形
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines
|
| IEC 61837-2-2000
| 频率控制和选择用表面安装的压电器件 标准外形和端头连接 第2部分:陶瓷外壳
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
|
| IEC 61837-3-2000
| 频率控制和选择用表面安装的压电器件 标准外形和端头连接 第3部分:金属外壳
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3: Metal enclosures
|
| IEC 61837-4-2004
| 频率控制和选择用表面安装的压电器件.标准外形和端头连接器.第4部分:混合外壳轮廓图
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 4: Hybrid enclosure outlines
|
| IEC 62092-2001
| 超声学 水听器 15MHz至40MHz频率范围内的特性和校准
| Ultrasonics - Hydrophones - Characteristics and calibration in the frequency range from 15 MHz to 40 MHz
|
| IEC 62106-2000
| 频率范围为87.5～108.0MHz的VHF/FM声音广播用无线电数据系统(RDS)的规范
| Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz
|
| IEC 62209-1-2005
| 人暴露于手持和车载无线通信设备产生的射频场.人体模型、仪器和规程.第1部分:紧贴耳朵使用的手持设备(频率
| Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)
|
| IEC/PAS 60603-7-3-2004
| 电子设备用连接件.第7-3部分:100 MHz频率及以下的数据传输用8路屏蔽的活动式连接器和固定式连接器的详细规
| Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
|
| IEC/PAS 61076-3-110-2002
| 电子设备用连接器.第3-110部分:频率在600MHz以下的8位连接器的详细规范
| Connectors for electronic equipment - Part 3-110: Detail specification for 8 way connectors for frequencies up to 600 MHz
|
| IEC/PAS 61076-3-111-2002
| 电子设备用连接器.第3-111部分:工业环境最高频率为250Hz的8频道,有屏蔽和无屏蔽的,松散的和固定连接器的详
| Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz
|
| IEC/PAS 61076-3-114-2005
| 电子设备用连接器.第3-114部分:矩形型连接器.与IEC 60603-7系列接口结合的工业环境用、最高频率为600Hz的8
| Connectors for electronic equipment - Part 3-114: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type
|
| IEC/PAS 61076-3-115-2005
| 电子设备用连接器.第3-115部分:矩形连接器.与IEC 60603-7系列接口结合的工业环境用最高频率为600Hz的8频道
| Connectors for electronic equipment - Part 3-115: Rectangular connectors - Protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 12 related to IEC 61076-3-106 - Push-pull type
|
| IEC/PAS 61076-3-116-2005
| 电子设备用连接器.第3-116部分:矩形连接器.与IEC 60603-7系列接口结合的工业环境用最高频率为600Hz的8频道
| Connectors for electronic equipment - Part 3-116: Rectangular connectors - Protective housings for use with 8-way shielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Bayonet coupling with spring clamp
|
| IEC/PAS 61169-4-2006
| 无线电频率连接器.第4部分:分规范.具有螺钉锁定的外部导体内径为16mm(0.63in)的射频同轴连接器.特性阻抗为5
| Radio-frequency connectors - Part 4: Sectional specification - Radio-frequency coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock - Characteristic impedance 50 Ω (type 7-16)
|
| IEC/PAS 62187 Edition 1.0-2000
| 可变频率的振动试验方法
| Variable frequency vibration test method
|
| IEC/TR 60283-1968
| 滤波器晶体单元的无用谐振频率和等效电阻的测量方法
| Methods for the measurement of frequency and equivalent resistance of unwanted resonances of filter crystal units
|
| IEC/TR 60444-3-1986
| 用π型网络零相位技术测量石英晶体元件参数 第3部分:利用有并联电容Co补偿的π型网络相位技术测量频率达200
| Measurement of quartz crystal unit parameters by zero phase technique in a -network; part 3: basic method for the measurement of two-terminal parameters of quartz crystal units up to 200 MHz by phase technique in a w-network with compensation of the parallel capacitance C<(Index)0>
|
| IEC/TR 60479-2-1987
| 通过人体的电流的效应 第2部分:特殊情况 第4章:频率100Hz以上的交流电流的效应 第5章:特殊电流波形的效应
| Effects of current passing through the human body. Part 2 : Special aspects. Chapter 4: Effects of alternating current with frequencies above 100 Hz. Chapter 5: Effects of special waveforms of current. Chapter 6: Effects of unidirectional single impulse currents of short duration
|
| IEC/TR 60657-1979
| 频率范围为10MHz-300,000MHz的非电离的辐射危险
| Non-ionizing radiation hazards in the frequency range from 1O MHz to 300 000 MHz
|
| IEC/TR 61000-1-4-2005
| 电磁兼容性(EMC).第1-4部分:总则.频率范围2kHz及以下的设备排放的电源频率传导的谐波电流的限值的历史比率
| Electromagnetic compatibility (EMC) - Part 1-4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
|
| IEC/TR2 61220-1993
| 超声学声场 0.5MHz～15MHz频率范围内用水听器测量和表征医疗超声设备产生的超声场的指南
| Ultrasonics-fields; guidance for the measurement and characterization of ultrasonic fields generated by medical ultrasonic equipment using hydrophones in the frequency range 0,5 MHz to 15 MHz
|
| IEC/TR3 61000-2-3-1992
| 电磁兼容性(EMC) 第2部分:环境 第3节:环境的描述 辐射现象和与非网频率有关的传导现象
| Electromagnetic compatibility (EMC); part 2: environment; section 3: description of the environment; radiated and non-network-frequency-related conducted phenomena
|
| IEC/TR3 61141-1992
| 射频同轴连接器的频率上限
| Upper frequency limit of r.f. coaxial connectors
|
| IEC/TS 61334-5-5-2001
| 采用配电线载波系统的配电自动化 第5-5部分：低层文件集 扩展频谱 快频率跳跃（SS-FFH）文件集
| Distribution automation using distribution line carrier systems - Part 5-5: Lower layer profiles - Spread spectrum-fast frequency hopping (SS-FFH) profile
|
| IEC/TS 61994-1-2003
| 频率控制和选择用压电和介电器件.词汇.第1部分:压电和介电谐振器
| Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 1: Piezoelectric and dielectric resonators
|
| IEC/TS 61994-2-2000
| 频率控制和选择用压电和介电器件 术语 第2部分:压电和介电滤波器
| Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 2: Piezoelectric and dielectric filters
|
| IEC/TS 61994-3-2004
| 频率控制和选择用压电和介电器件.词汇.第3部分:压电和介质振荡器
| Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 3: Piezoelectric and dielectric oscillators
|
| IEC/TS 61994-4-1-2001
| 频率控制和选择用压电和介电器件 术语 第4-1部分：压电材料 合成石英晶体
| Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-1: Piezoelectric materials; Synthetic quartz crystal
|
| IEC/TS 61994-4-2-2003
| 频率控制和选择用压电和介电器件.术语汇编.第4-2部分:压电和介电材料.压电陶瓷
| Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-2: Piezoelectric and dielectric materials - Piezoelectric ceramics
|
| IEC/TS 61994-4-4-2005
| 频率控制和选择用压电和介电器件.术语汇编.第4-4部分:材料.表面声波设备用材料
| Piezoelectric and dielectric devices for frequency control and selection - Glossary - Part 4-4: Materials - Materials for Surface Acoustic Wave (SAW) devices
|
| ISO 11093-8-1997
| 纸和纸板 纸芯的检测 第8部分:试验模型分析法测定自然频率和弯曲模量
| Paper and board - Testing of cores - Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis
|
| ISO 11785-1996
| 动物对无线电频率识别的技术概念
| Radio frequency identification of animals - Technical concept
|
| ISO 15186-3-2002
| 声学.用声强进行建筑物和建筑构件的隔声测量.第3部分:低频率实验室测量
| Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies
|
| ISO 16-1975
| 声学 标准调音频率(标准音调)
| Acoustics; Standard tuning frequency (Standard musical pitch)
|
| ISO 2247-2000
| 包装 满装的运输包装和单元货物 固定低频率振动试验
| Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency
|
| ISO 266-1997
| 声学 优选频率
| Acoustics - Preferred frequencies
|
| ISO 3389-1975
| 航空器 无线电频率的挠性同轴电缆 尺寸和电气特性
| Aircraft; Radio frequency flexible coaxial cables; Dimensions and electrical characteristics
|
| ISO 5347-14-1993
| 振动与冲击传感器的校准方法 第14部分:安装在钢块上的无阻尼加速度计共振频率的测试
| Methods for the calibration of vibration and shock pick-ups; part 14: resonance frequency testing of undamped accelerometers on a steel block
|
| ISO 7196-1995
| 声学 次声测量用的频率计权特性
| Acoustics - Frequency-weighting characteristic for infrasound measurements
|
| ISO 7831-1986
| 电影 35mm电影片光学声迹的还音A环(电声)频率响应 还音特性
| Cinematography; A-chain frequency response for reproduction of 35 mm photographic sound; Reproduction characteristics
|
| ISO 8590-1994
| 电影 70mm电影涂磁发行拷贝上磁性声迹 录音频率响应特性
| Cinematography - Audio records on 70 mm motion-picture release prints with magnetic stripes - Recorded characteristic
|
| ISO 8622-1998
| 电影 70mm电影涂磁发行拷贝上磁性声迹 A环还音频率响应特性
| Cinematography - Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes - A-chain reproduction characteristics
|
| ISO/IEC 14443-2-2001
| 识别卡 无接触点集成电路卡 近程卡 第2部分：无线电频率功率和信号接口
| Identification cards - Contactless integrated circuit(s) cards; Proximity cards - Part 2: Radio frequency power and signal interface
|
| ISO/TR 10305-1-2003
| 道路车辆.电磁场强度测量设备的校正.第1部分:频率大于0Hz的电磁场测量设备
| Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies 0 Hz |
| ISO/TR 15461-1997
| 钢制锻件 机械试验用试验频率、抽样条件和试验方法
| Steel forgings - Testing frequency, sampling conditions and test methods for mechanical tests
|
| ISO/TR 389-5-1998
| 声学 校正听力设备的基准零级 8kHz-16kHz频率范围内的纯音的等效阈声压级
| Acoustics - Reference zero for the calibration of audiometric equipment - Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
|
| 编号 | 中文名称 | 英文名称 |
|---|