| 编号 | 中文名称 | 英文名称 |
|---|
| NF C01-561-1991
| 电工技术词汇.第561章:频率控制与选择用压电器件
| (Electrotechnical vocabulary. Chapter 561 : piezoelectric devices for frequency control and selection.)
|
| NF C26-226-1998
| 绝缘材料介电强度.试验方法.第1部分:功率频率试验
| (Electrical strength of insulating materials. Test methods. Part 1 : tests at power frequencies.)
|
| NF C26-230-1970
| 绝缘材料的试验方法.测定工频、音频和无线电频率用电绝缘材料介电常数和离散因子的推荐方法
| (Methods of testing insulating materials. Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating material at power, audio and radio freq.)
|
| NF C26-231/AM1-1978
| 绝缘材料的试验方法.绝缘材料在频率为300MHz以上时的介电特性的推荐测定方法
| (METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.)
|
| NF C26-231M1-1978
| 绝缘材料的试验方法.绝缘材料在频率为300MH2以上时的介电特性的推荐测定方法
| (METHODS OF TESTING INSULATING MATERIALS. RECOMMENDED METHODS FOR THE DETERMINATION OF THE DIELECTRIC PROPERTIES OF INSULATING MATERIAL AT FREQUENCIES ABOVE 300 MHZ.)
|
| NF C27-221-1995
| 绝缘液.工业频率下击穿电压的测定.试验方法
| (Insulating liquids. Determination of the breakdown voltage at power frequency. Test method.)
|
| NF C28-911-1997
| 磁性材料.中等频率下电工钢片和电工钢带的磁性测量的方法
| (Magnetic materials. Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies.)
|
| NF C28-940-2001
| 在中等频率的薄磁钢带
| (Thin magnetic steel strip for use at medium frequencies.)
|
| NF C31-888-7-2003
| 超导性.第7部分:电子学特性的测量.微波频率下超导体的表面电阻
| (Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies.)
|
| NF C42-103-1990
| 直接指示电测仪表其及附件.频率计用特殊规定
| (Direct acting indicating analogue electrical measuring instruments and their accessories. Part 4 : special requirements for frequency meters.)
|
| NF C45-205-6-2001
| 继电器.第22-6部分:测量继电器和保护设备的配电试验.由无线电频率场感应的抗干扰和传导分配
| (Electrical relays - Part 22-6 : elctrical disturbances tests for measuring relays and protection equipment - Immunity to conducted disturbances induced by radio frequency fields.)
|
| NF C45-205-7-2003
| 电气继电器.第22-7部分:测量继电器和保护装置的电气干扰试验.电源频率抗扰试验
| (Electrical relays - Part 22-7 : electrical disturbance tests for measuring relays and protection equipment - Power frequency immunity tests.)
|
| NF C46-905-1-2001
| 配电线路载体系统的配电自动化.第5-1部分:低层轮廓.扩展频率移位键控轮廓
| (Distribution automation using distribution line carrier systems - Part 5-1 : lower layer profiles - The spread frequency shift keying (S-FSK) profile.)
|
| NF C48-229-1987
| 侵入的检测.超高频率的运转检测器.特殊标准
| (INTRUSION DETECTION. VERY-HIGH FREQUENCY MOTION DETECTORS. SPECIFIC STANDARD.)
|
| NF C63-075-1987
| 低压工业设备.近距离电感应传感器.传感距离和频率的测定方法
| (LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE. INDUCTIVE PROXIMITY SWITCHES. METHODS FOR MEASURING THE OPERATING DISTANCE AND OPERATING FREQUENCY. (EUROPEAN STANDARD EN 50 010).)
|
| NF C90-004-1991
| 有线电视的MAC频率(用MA/BLR表示)的射频特性.(欧洲标准 EN 50 080)
| (RF characteristics of MAC AM-VSB cable receivers.)
|
| NF C90-121-1984
| 远程通信和电子设备.30MHz至1GHz的频率范围的无线电广播和电视广播接收天线
| (Telecommunication and electronic equipment. Aerials for the reception of sound and television broadcasting in the frequency range 30 MHzto 1 GHz.)
|
| NF C90-201-2-1-2003
| 频率范围为3KHz至148.5KHz的低压电气设备的信号传输.第2-1部分:住宅、商业和轻工用工作频率范围为95kHz-148
| ()
|
| NF C90-201-2-2-2003
| 频率范围为3KHz至148.5KHz的低压电气设备的信号传输.第2-2部分:工业环境中使用的工作频率范围为95kHz-148.5
| ()
|
| NF C90-201-2-3-2003
| 频率范围由3KHz至148.5KHz的低压电气设备的信号传输.第2-3部分:电源和配电器使用的工作频率为3kHz至95kHz的
| ()
|
| NF C90-201-4-2/A1-2003
| 频率范围3kHz到148.5kHz的低压电气装置上的信号传送.第2部分:低压去耦滤波器.安全要求.
| (Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2 : low voltage decoupling filters - Safety requirements.)
|
| NF C90-201-7-2002
| 频率范围3kHz到148.5kHz的低压电力设备上的信号传送.第7部分:设备阻抗
| (Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7 : equipment impedance.)
|
| NF C90-352-5-1994
| 数字微波无线电发射系统用设备的测量方法.第2部分:地面无线电中继系统.第5节:频率调制器
| (Methods of measurement for radio equipment used in satellite earth sations. Part 2 : measurements for sub-systems. Section five : frequency modulators.)
|
| NF C90-352-6-1994
| 卫星地面站用无线电设备的测量方法.第2部分:分系统.第6节:频率解调器
| (Methods of measurement for radio equipment used in satellite earth stations. Part 2 : measurements for sub-systems. Section 6 : frequency demodulators.)
|
| NF C91-004-16-1998
| 电磁兼容性(EMC).第4-16部分:试验和测量技术.频率范围0Hz～150kHz的传导共模干扰抗扰性试验
| (Electromagnetic compatibility (EMC). Part 4-16 : testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz.)
|
| NF C91-004-28-2000
| 电磁兼容性(EMC).第4-28部分:试验和测量技术.电源频率的变化.抗干扰试验
| (Electromagnetic compatibility (EMC) - Part 4-28 : testing and measurement techniques - Variation of power frequency, immunity test.)
|
| NF C91-004-8-1994
| 电磁兼容性(EMC).第4部分:试验和测量技术.第8节:电源频率磁场抗扰试验.基本电磁兼容性(EMC)出版物
| (Electromagnetic compatibility (emc). Part 4 : testing and measurement techniques. Section 8 : power frequency magnetic field immunity test. Basic EMC publication.)
|
| NF C91-004-8/A1-2001
| 电磁兼容性.第4-8部分:试验和测量技术.电源频率磁场抗扰性试验
| (Electromagnetic compatibility (EMC) - Part 4-8 : testing and measurement techniques - Power frequency magnetic field immunity test.)
|
| NF C91-011-1998
| 工业,科学和医学(ISM)无线电频率设备.无线电干扰特性.测量极限和方法
| (Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement.)
|
| NF C93-406-4-105-1999
| 直流低频率模拟设备和高速数据应用设备用经质量评定的连接器.第4部分:印制电路用连接器.第105节:用途广泛的
| ()
|
| NF C93-407-17-1999
| 频率低于3MHz的连接器.第17部分:可充电电池用可多向插合的互连器件的详细规范
| (Connectors for frequencies below 3 MHz - Part 17 : detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries.)
|
| NF C93-430-1-1998
| 用于印制板的频率低于3MHZ的连接件.第1部分:一般规范.具有评估质量的数字规范的准备指南和一般要求
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 1 : generic specification. General requirements and guide for the preparation of detail specifications, with assessed quality.)
|
| NF C93-430-10-1998
| 用于印制板的频率低于3MHZ的连接件.第10部分: 2.54MM(0,1IN)基本栅极的印制板两部分连接件,倒转型
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 10 : two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type.)
|
| NF C93-430-12-1998
| 用于印制板的频率低于3MHZ的连接件.第12部分:尺寸的详细规范.用于集成电路的插座设计范围内的试验和一般要
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 12 : detail specification for dimensions, general requirements and tests for a range of socket designed for use with integrated circuits.)
|
| NF C93-430-13-1998
| 用于印制板的频率低于3MHZ的连接件.第13部分:非达到式绝缘替代终端用自由连接件,2,54(0,1)基本栅极的印制板
| ()
|
| NF C93-430-14-1999
| 印制板用频率低于3MHz的连接器.第14部分:音频、视频和音像设备用低音频及视频圆形连接器详细规范
| (Connectors for frequencies below 3 MHz for use with printed boards - Part 14 : detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment.)
|
| NF C93-430-1998
| 印制板用频率低于3MHz的连接器.第7部分:包括具有一般匹配特性固定和非固定连接器的经质量评定的8路连接器详
| (CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 7 : DETAIL SPECIFICATION FOR CONNECTORS, 8-WAY, INCLUDING FIXED AND FREE CONNECTORS WITH COMMON MATING FEATURES, WITH ASSESSED QUALITY. (EUROPEAN STANDARD EN 60 603-7).)
|
| NF C93-430-2-1999
| 印制板用的频率低于3MHz的连接器.第2部分:已评定质量的用于印制板的基本栅极点2,54MM(0.1IN)共有固定特性的
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 2 : detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0.1 in) with common mounting features.)
|
| NF C93-430-3-1998
| 用于印制板的频率低于3MHZ的连接件.具有在2,54MM(0,1IN)中心接触空间和同样空间的交错终端的印制板两部连接
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 3 : two-part connectors for printed boards, having contacts spaced at 2,54 mm (0,1 in) centres and staggered terminations at that same spacing.)
|
| NF C93-430-4-1998
| 用于印制板的频率低于3MHZ的连接件.第4部分:具有在1,91MM(0,075IN)中心接触空间和同样空间的交错终端的印制
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 4 : two-part connectors for printed boards, having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing.)
|
| NF C93-430-5-1998
| 用于印制板的频率低于3MHZ的连接件.第5部分:2,54MM(0.1IN)空间的双边印制板用两部连接件和边缘套节连接件
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 5 : edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing.)
|
| NF C93-430-6-1998
| 用于印制板的频率低于3MHZ的连接件.第6部分:具有1,6MM(0,063)常规厚度的单边或双边印制板用2,54MM(0,1IN)接
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 6 : edge-docket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness.)
|
| NF C93-430-7-1998
| 印制板用频率低于3MHz的连接器.第7部分:经质量评定的包括具有一般匹配特性的固定和活动连接器的8路连接器的
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 7 : detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality.)
|
| NF C93-430-8-1998
| 用于印制板的频率低于3MHZ的连接件.第8部分:具有0.63MMx0.63MM平方凸模接触的2,54MM基本栅极的印制板用两部
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 8 : two-parts connectors for printed boards, for basic grid of 2,54 mm (0,1 in) with square male contacts of 0,63 mm X 0,63 mm.)
|
| NF C93-430-9-1998
| 用于印制板的频率低于3MHZ的连接件.第9部分:2.54MM(0,1IN)基本栅极,后控板和电缆连接件的印制板用两部分连
| (Connectors for frequencies below 3 MHz for use with printed boards. Part 9 : two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in).)
|
| NF C93-551-1977
| 电子元件.无线电频率用半硬同轴电缆.一般规定
| (ELECTRONIC COMPONENTS. SEMI RIGID COAXIAL CABLES. GENERAL REQUIREMENTS.)
|
| NF C93-560-1-1997
| 无线电频率连接器.单个,多个系列、双语种空白详细规范
| (Radio-frequency connectors. Part 1-1 : single, multi-series, dual-language blank detail specification.)
|
| NF C93-584-2-4-1998
| 射频和同轴电缆部件.第2-4部分:广播和电视接收机用电缆部件的详细规范(IEC 60169-2连接器频率范围0-3000MHZ
| (Radio frequency and coaxial cable assemblies. Part 2-4 : detail specification for cable assemblies for radio and TV receivers (frequency range 0 to 3000 MHz, IEC 60169-2 connectors).)
|
| NF C93-584-2-5-1999
| 射频和同轴电缆组件.第2-5部分:广播和电视接收机用电缆组件的详细规范.IEC 60169-2连接器的频率范围0-1000M
| (Radio frequency and coaxial cable assemblies. Part 2-5 : detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 1000 MHz, IEC 60169-2 connectors.)
|
| NF C93-584-2-6-1999
| 射频和同轴电缆组件.第2-6部分:广播和电视接收机用电缆组件的详细规范.IEC 60169-24连接器的频率范围0-3000
| (Radio frequency and coaxial cable assemblies. Part 2-6 : detail specification for cable assemblies for radio and TV receivers. Frequency range 0 to 3000 MHz, IEC 60169-24 connectors.)
|
| NF C93-585-3-2-1998
| 无线频率电缆.第3-2部分:水平地板线数字通信共轴电缆.185M达到10MB/S局域网固体介电共轴电缆详细规范
| (Radio frequency cables. Part 3-2 : coaxial cables for digital communication in horizontal floor wiring. Detail specification for coaxial cables with solid dielectric for local area network of 185 m reach and up to 10 Mb/s.)
|
| NF C93-621-2000
| 用π型网络的零相位技术测量石英晶体单元参数.第1部分:用π型网络零相位技术测量石英谐振器的谐振频率和谐
| (Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 1 : basic method for the measurement of resonance frequency and resonance resistance of quartz crystal unit)
|
| NF C93-624-2001
| 用π型网络的零相位技术测量石英晶体单元的参数.第4部分:石英晶体单元负荷谐振频率fl、负荷谐振电阻Rl的测
| (频率小于等于30MHz)()
|
| NF C93-628-2-2001
| 频率控制和选择用表面安装的压电器件.标准外形和终端引线连接.第2部分:陶瓷外壳
| (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2 : ceramic enclosures.)
|
| NF C93-628-3-2001
| 频率控制和选择用表面安装的压电器件.标准外形和终端引线连接.第3部分:金属外壳
| (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 3 : metal enclosures.)
|
| NF C94-566-1998
| 射频电磁场暴露测量.频率范围100KHZ-1GHZ的场强
| (Measurement of exposure to radio-frequency electromagnetic fields. Field strength in the frequency range 100 kHz to 1 GHz.)
|
| NF C96-022-12-2002
| 半导体器件.机械和气候试验方法.第12部分: 振动、可变频率
| (Semiconductor devices - Mechanical and climatic test methods - Part 12 : vibration, variable frequency.)
|
| NF C96-627-1-3-2000
| 波导型电介谐振器.第1-3部分:一般信息和试验条件.在微波频率内电介谐振器材料的复合相关可允许性的测量方法
| (Waveguide type dielectric resonators - Part 1-3 : general information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequenc)
|
| NF C96-628-1-2000
| 频率控制和选则用表面安装的压电器件.标准外形和终端引线的连接.第1部分:塑料模压外壳外形
| (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1 : plastic moulded enclosure outlines.)
|
| NF C97-030-1970
| 电声.电声仪器频率响应曲线轨迹图标度
| (Electro-acoustics. Scales for plotting frequency characteristics ofelectro-acoustic instruments.)
|
| NF C97-901-1994
| 用0.5MHz～15MHz频率的水平扫描技术进行水听器的绝对校准
| (The absolute calibration of hydrophones using the planar scanning technique in the frequency range 0,5 MHzto 15 MHz.)
|
| NF C97-902-1994
| 0.5MHz至15MHz频率范围内用水听器测量和表征超声场
| (Measurement and characterisation of ultrasonic fields using hydrophones in the frequency range 0.5 MHzto 15 MHz.)
|
| NF C97-905-1994
| 频率范围:0.5MHz～25MHz的液体超声功率测定
| (Ultrasonic power measurement in liquids in the frequency range 0,5 MHzto 25 MHz.)
|
| NF C97-909-1997
| 超声波学.0.5MHz～5MHz频率范围物理治疗系统的性能要求和测量方法
| (Ultrasonics. Physiotherapy systems. Performance requirements and methods of measurement in the frequency range 0,5 MHz to 5 MHz.)
|
| NF C99-102-2002
| 评估人体暴露于电子粒子监测器(EAS)、无线电频率识别(RFID)及类似设备中使用装置的电磁场
| (Evaluation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications.)
|
| NF C99-103-2002
| 与人体暴露在无线电站和频率:110 MHz～40 GHz的无线远程通信系统的电磁场强度和SAR相关的计算和测量用基本
| (Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunicati)
|
| NF C99-110-2002
| 对电子粒子监视(EAS)、射频识别(RFID)和类似应用的运作频率范围0Hz～10 GHz的装置产生的电磁场,人们受其辐
| (Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID)
|
| NF E90-300-1978
| 旋转频率在１０－２００转／秒时的机器的机械振动.评定标准制定的基准
| (MECHANICAL VIBRATION OF MACHINES WITH ROTATIONAL FREQUENCIES FROM 10 S-1 TO 200 S-1. BASIS FOR SPECIFYING EVALUATION STANDARDS.)
|
| NF E90-301-1978
| 旋转频率在１０－２００转／秒时的机器的机械振动.现场振动强度的测定和评定
| (MECHANICAL VIBRATION OF LARGE ROTATING MACHINES WITH ROTATIONAL FREQUENCIES FROM 10 S-1 TO 200 S-1. MEASUREMENT AND EVALUATION OF VIBRATION SEVERITY IN SITU.)
|
| NF F07-024-1992
| 铁路固定设备和车辆.电磁干拢.铁路信号和电信电缆50H2频率的屏蔽系数的确定和测量
| (RAILWAY FIXED EQUIPMENT AND ROLLING STOCK. ELECTROMAGNETIC DISTURBANCES. DETERMINATION AND MEASUREMENT OF SCREENING FACTOR WITH A FREQUENCY OF 50 HZ OF RAILWAY SIGNALLING AND TELECOMMUNICATION CABLES.)
|
| NF H00-043-2003
| 包装.满装运输包装件和成组装运.固定低频率振动试验
| (Packaging - Complete, filled transport packages and unit loads - Vibration tests at fixed low frequency.)
|
| NF M08-016-1992
| 石油和液态石油产品.计量用密度的测量.振荡频率法
| (PETROLEUM AND LIQUID PETROLEUM PRODUCTS. DETERMINATION OF DENSITY FOR METROLOGICAL PURPOSES. OSCILLATION FREQUENCE METHOD.)
|
| NF S30-007-5-2000
| 声学.测听设备校准用参照区.第5部分:8kHz至16kHz频率范围内纯音的参考等效阈声压级
| (Acoustics - Reference zero for the calibration of audiometric equipment - Part 5 : reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz.)
|
| NF Z64-700-1984
| 信息处理.在２００mm（８in）软磁盘上利用２个频率以１３，２６２ｆｔｐｒａｄ录制在一面的信息交换.尺寸特
| (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 IN) FLEXIBLE DISK CARTRIDGES USING TWO-FREQUENCY RECORDING AT 13262 FTPRAD ON ONE SIDE. DIMENSIONAL,PHYSICAL AND MAGNETIC CHARACTERISTICS.)
|
| NF Z64-701-1984
| 信息处理.在２００mm（８in）软磁盘上利用２个频率以１３，２６２ｆｔｐｒａｄ录制在一面的信息交换.磁道示
| (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 IN) FLEXIBLE DISK CARTRIDGES USING TWO-FREQUENCY RECORDING AT 13 262 FTPRAD ON ONE SIDE. TRACK FORMAT.)
|
| NF Z64-705-1984
| 信息处理.在２００mm（８in）软磁盘上利用修正的频率调制以１３，２６２ｆｔｐｒａｄ录制在两面上的信息交
| (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 IN) FLEXIBLE DISK CARTRIDGE USING MODIFIED FREQUENCY MODULATION RECORDING AT 13262 FTPRAD ON TWO SIDES. DIMENSIONAL,PHYSICAL AND MAGNETIC CHARACTERISTICS.)
|
| NF Z64-706-1985
| 信息处理.在２００mm（８in）软磁盘上利用修正的频率调制以１３，２６２ｆｔｐｒａｄ，１９ｔｐｍｍ（４８
| (INFORMATION PROCESSING. DATA INTERCHANGE ON 200 MM (8 MM) FLEXIBLE DISK CARTRIDGE USING MODIFIED FREQUENCY MODULATION RECORDING AT 13262 FTPRAD,1,9 TPMM (48 TPI),ON BOTH SIDES. PART 2 : TRACK FORMAT.)
|
| NF Z64-721-1995
| 信息技术.在１３０mm（５．２５in）软磁盘上利用修正的频率调制以７９５８ｆｔｐｒａｄ１．９ｔｐｍｍ（４
| ()
|
| NF Z64-722-1989
| 信息处理.在１３０mm（５．２５in）软磁盘上利用修正的频率 调制以７，９５８ｆｔｐｒａｄ１．９ｔｐｍｍ（
| (INFORMATION PROCESSING. DATA INTERCHANGE ON 130 MM (5.25 IN) FLEXIBLE DISK CARTRIDGES USING MODIFIED FREQUENCY MODULATION RECORDING AT 7 958 FTPRAD,1.9 TPMM (48 TPI),ON BOTH SIDES. PART 2 : TRACK FORMAT A. (EUROPEAN STANDARD EN 27487-2).)
|
| NF Z64-771-1993
| 信息处理.使用调频率以13262FTPRAD在每面80磁道上调制录制的130mm(5.25in)盒式软磁盘上的数据交换.第1部分:
| ()
|
| NF Z64-772-1993
| 信息处理.以限定的频率13262次磁通变换/弧度在每侧80列磁道上调制录制的130mm(5.25in)盒式软磁盘的数据交换
| (INFORMATION PROCESSING. DATA INTERCHANGE ON 130 MM (5,25 IN) FLEXIBLE DISK CARTRIDGES USING MODIFIED FREQUENCY MODULATION RECORDING AT 13 262 FTPRAD, ON 80 TRACKS EACKS EACH SIDE. PART 2 : TRACK FORMAT A FOR 77 TRACKS. (EUROPEAN STANDARD EN 28630-2).)
|
| NF Z64-773-1993
| 信息处理.以限定的频率13262次磁通变换/弧度在每侧80列磁道上调制录制的130mm(5.25in)盒式软磁盘的数据交换
| (INFORMATION PROCESSING. DATA INTERCHANGE ON 130 MM (5,25 IN) FLEXIBLE DISK CARTRIDGES USING MODIFIED FREQUENCY MODULATION RECORDING AT 13 262 FTPRAD, ON 80 TRACKS EACH SIDE. PART 3: TRACK FORMAT B FOR 80 TRACKS. (EUROPEAN STANDARD EN 28630-3).)
|
| NF Z84-446-1998
| 无线电设备和系统(RES).在频率谱带为864,1MHZ到868-1MHZ内操作的第2代无绳电话装置(CT2)的电磁兼容性(EMC)
| (Radio Equipment and Systems (RES). ElectroMagnetic Compatibility (EMC) standard for second generation Cordless Telephone (CT2) apparatus operating in the frequency band 864,1 MHz to 868-1 MHz, including public access services.)
|
| NF Z84-489-3-2002
| 电磁兼容性和无线电频谱管理(ERM).无线电设备的电磁兼容性标准.第3部分:使用频率在9kHz-40GHz间短程设备的
| (Electromagnetic compatibility and radio spectrum matters (ERM) - Electromagnetic compatibility (EMC) standard for radio equipment and services - Part 3 : specific conditions for short-range devices (S)
|
| NF Z84-761-1-2002
| 电磁兼容性和无线电频谱管理(ERM).短程装置.在2.45GHz频率范围内运行的铁路车辆的自动识别.第1部分:技术特
| ()
|
| NF Z84-839-1-2002
| 电磁兼容性和无线电频谱管理(ERM).在频率范围:超低功率有源医用设备和辅助设备用的频率范围:402 MHz ～ 405
| ()
|
| NF Z84-839-2-2003
| 电信.电磁兼容性和无线电频谱管理(ERM).超低功率活性医疗植入物和附件用频率范围402MHz-405MHz的无线电设备
| ()
|
| NF Z85-063-2003
| 固定无线电系统.多点设备.工作频率范围31.0GHz-33.4GHz(32GHz)的多点数字无线电系统
| (Fixed Radio Systems - Multipoint equipment - Multipoint digital radio systems operating in the 31,0 GHz to 33,4 GHz (32 GHz) frequency range.)
|
| NF Z85-215-2-2002
| 固定无线电系统.点对多点天线.在频率范围:11 GHz ～ 60 GHz的固定无线电系统点对多点天线
| (Fixed radio systems - Point to multipoint antennas - Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band - Part 2 : 24 GHz to 30 GHz.)
|
| NF Z85-408-2003
| 电信.固定无线电系统.点对点设备.不要求同等频率设计的58 GHz下数字信号和模拟视频信号传输用数字无线电系
| (Telecommunications - Fixed radio systems - Point-to-point equipment - Parameters for digital radio systems for the transmission of digital signals and analogue video signals operating at around 58 GHz)
|
| NF Z85-430-1999
| 传输和多路转换(TM).数字无线电继电系统(DRRS).在18GHZ频率谱带范围内有55MHZ空间频道操作的携带1x同步运输
| ()
|
| NF Z85-630-1998
| 传输和多路转换(TM).在1,4GHz频率带内操作的低容量点对点数字无线电继电系统(DRRS)
| (Transmission and Multiplexing (TM). Low capacity point-to-point Digital Radio-Relay Systems (DRRS) operating in the 1,4 GHz frequency band.)
|
| NF Z85-632-2002
| 传输和多路转换(TM).在频率范围:24.25GHz～29.50GHz和31.0GHz～31.8 GHz.工作的模拟视频信号的传输用固定无
| (Transmission and Multiplexing (TM) - Fixed radio link equipment for the transmission of analogue video signals operating in the frequency bands 24,25 GHz to 29,50 GHz and 31,0 GHz to 31,8 GHz.)
|
| NF Z85-633-1998
| 传输和多路转换(TM).数字无线电继电系统(DRRS).在频率范围为2,1GHz至2,6GHz内操作的低容量和中容量点对点数
| (Transmission and Multiplexing (TM). Digital Radio-Relay Systems (DRRS). Low and medium capacity point-to-point DDRS operating in the frequency range 2,1 to 2,6 GHz.)
|
| NF Z85-636-1998
| 传输和多路转换(TM). 在频率范围为1GHz至3GHz内的点对多点数字无线电系统的时间分支多路通道(TDMA)
| (Transmission and Multiplexing (TM). Time Division Multiple Access (TDMA) point-to-multipoint digital radio systems in the frequency range 1 to 3 GHz.)
|
| NF Z85-638-1998
| 传输和多路转换(TM). 数字无线电继电系统.在频率谱带范围为10GHz和14GHz内的有20MHz可转换通路空间内操作的
| ()
|
| NF Z85-833-2000
| 固定无线电系统.点对点天线.在频率带3GHZ-60GHZ范围内操作的点对点固定无线电系统
| (Fixed Radio Systems - Point-to-Point Antennas - Antennas for point-to-point fixed radio systems operating in the frequency band 3 GHz to 60 GHz.)
|
| NF Z86-157-1996
| 卫星地面站和系统(SES).在11/12GHZ频率范围操作的只接收非常小孔径终端(VSATS)
| (SATELLITE EARTH STATIONS AND SYSTEMS (SES). RECEIVE-ONLY VERY-SMALL APERTURE TERMINAL (VSATS) OPERATING IN THE 11/12 GHZ FREQUENCY BANDS. (EUROPEAN TELECOMMUNICATION STANDARD ETS 300157).)
|
| NF Z86-159-1996
| 卫星地面站和系统(SES).在固定卫星服务(FSS)11/12/14GHZ频率范围应用的通信操作的只发射或发射接受非常小孔
| ()
|
| NF Z86-332-1998
| 卫星地面站和系统(SES).用于通信操作的在固定的卫星服务器(FSS)6GH和4GH频率带内只发射或发射和接收非常小
| ()
|
| NF Z86-333-1999
| 卫星地面站和系统(SES).在4GHZ频率范围内的只接收非常小孔径终端(VSATS).(ETS300333)
| (SATELLITE EARTH STATIONS AND SYSTEMS (SES). RECEIVE-ONLY VERY SMALL APERTURE TERMINALS (VSATS) OPERATING IN THE 4 GHZ FREQUENCY BAND. (EUROPEAN TELECOMMUNICATION STANDARD ETS 300333).)
|
| NF Z86-740-2000
| 卫星地面站和系统(SES).在1,5/1,6 GHz频率带工作,可以用小比特速率进行数据通信(LBRDC),对报警及安全通信没
| ()
|
| NF Z86-784-2000
| 卫星地面站和系统.在11/12GHZ频率带范围操作的只接收电视的卫星地面站
| (Satellite Earth Station and Systems (SES) - Television Receive-Only (TVRO) satellite earth stations operating in the 11/12 GHz frequency bands.)
|
| NF Z86-926-2002
| 地面卫星站和系统(SES).地球同步卫星的遥测、指挥和距离调整(TCR)用无线电频率调制标准
| (Satellite earth stations and systems (SES) - Radio frequency and modulation standard for telemetry, command and ranging (TCR) of geostationary communications satellites.)
|
| NF Z87-831-1999
| 电磁兼容性和无线电频谱(ERM).1.6/2.4GHZ和2GHZ频率波段下操作的卫星个人通信网(S-PCN)内使用的海上移动地
| (Electromagnetic compatibility and Radio spectrum Matters (ERM). ElectroMagnetic Compatibility (EMC) for Mobile Earth Stations (MES) used within Satellite Personal Communications Networks (S-PCN) operating in the 1,6/2,4 GHz and 2 GHz frequency bands.)
|
| NF Z88-477-2002
| 通用个人电信(UPT).UPT阶段2.UPT集成线路卡(ICC)和卡的接收装置(CAA).接口的功能规范.适用于双音调多频率装
| (Universal Personal Telecommunication (UPT) - UPT Phase 2 - Fonctional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CAD) - UPT card accepting Dual T)
|
| 编号 | 中文名称 | 英文名称 |
|---|