编号 | 中文名称 | 英文名称 |
EN 10090-1998
| 内燃机阀门用钢和合金
| Valve steels and alloys for internal combustion engines
|
EN 1175-2-1998
| 工业货车安全 电气安全 第2部分:内燃机驱动货车的一般要求
| Safety of industrial trucks - Electrical requirements - Part 2: General requirements of internal combustion engine powered trucks
|
EN 1175-3-1998
| 工业货车安全 电气安全 第3部分:内燃机驱动货车电力传输系统的特殊要求
| Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for the electric power transmission systems of internal combustion engine powered trucks
|
EN 12601-2001
| 活塞式内燃机驱动的发电机组 安全
| Reciprocating internal combustion engine driven generating sets - Safety
|
EN 55012-2002
| 车辆、艇、内燃机驱动装置 无线电骚扰特性 用于保护受骚扰对象(除安装在本车辆/艇/装置内或相邻车辆/艇/
| Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/d
|
EN 60034-22-1997
| 旋转电机 第22部分:往复式内燃机(RIC)驱动的发电机组用交流发电机
| Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets (IEC 60034-22:1996)
|
EN ISO 11102-1-1997
| 往复式内燃机 手柄起动装置 第1部分:安全要求和试验
| Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997)
|
EN ISO 11102-2-1997
| 往复式内燃机 手柄起动装置 第2部分:脱开角试验方法
| Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997)
|
EN ISO 11806-1997
| 农林机械 由内燃机驱动的便携手持式割灌机和割草机 安全
| Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cutters and grass trimmers - Safety (ISO 11806:1997)
|
EN ISO 8178-1-1996
| 往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions (ISO 8178-1:1996)
|
EN ISO 8178-2-1996
| 往复式内燃机 排放测量 第2部分:气体和颗粒排放物的现场测量
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 2: Measurement of gaseous and particulate exhaust emissions at site (ISO 8178-2:1996)
|
EN ISO 8178-4-1996
| 往复式内燃机 排放测量 第4部分:不同用途发动机的试验周期
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 4: Test cycles for different engine applications (ISO 8178-4:1996)
|
EN ISO 8178-5-1997
| 往复式内燃机 排放测量 第5部分:试验用燃料
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 5: Test fuels (ISO 8178-5:1997)
|
EN ISO 8178-6-2000
| 往复式内燃机 排放测量 第6部分:测量结果和试验报告
| Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Report of measuring results and test (ISO 8178-6:2000)
|
EN ISO 9785-2002
| 造船技术 可行驶内燃机车辆的货舱的通风 气流总需量的理论计算
| Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines may be driven - Calculation of theoretical total airflow required (ISO 9785:2002)
|
prEN 88528-11-2002
| 交流发电机组驱动的往复式内燃机 第11部分:旋转连续动力系统 性能要求和试验方法
| IEC 88528-11, Ed. 1: Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems; Performance requirements and test methods
|
prEN ISO 14314-2000
| 往复式内燃机 反向起动设备 一般要求
| Reciprocating internal combustion engines - Re-coil starting equipment - General safety requirements (ISO/DIS 14314:2000)
|
prEN ISO 6826-1994
| 往复式内燃机 防火
| Reciprocating internal combustion engines - Fire protection (ISO/DIS 6826:1994)
|
编号 | 中文名称 | 英文名称 |