编号 | 中文名称 | 英文名称 |
NF A35-579-1998
| 内燃机合金和钢材
| (Valve steels and alloys for internal combustion engines.)
|
NF C51-222-2000
| 旋转电机.第22部分:往复式内燃机驱动的发电机组(RIC)用交流发电机
| (Rotating electrical machines - Part 22 : AC genertors for reciprocating internal combustion (RIC) engine driven generating sets.)
|
NF C91-012-2002
| 车辆,船舶,内燃机驱动装置.无线电干扰特性.不包括那些安装在车辆/小船/自身有驱动的装置中的或类似车辆/小
| ()
|
NF E37-001-1-2001
| 往复式内燃机.词汇.第1部分:发动机设计和运行术语
| (Reciprocating internal combustion engines - Vocabulary - Part 1 : terms for engine design and operation.)
|
NF E37-002-1986
| 往复式内燃机.发动机部件的术语和定义.第1部分:发动机及其外壳的结构
| (RECIPROCATING INTERNAL COMBUSTION ENGINES. TERMS AND DEFINITIONS OF ENGINE COMPONENTS. PART 1 : ENGINE STRUCTURE AND EXTERNAL COVERS.)
|
NF E37-003-2000
| 往复式内燃机.发动机部件的术语和定义.第2部分:主要机械
| (Reciprocating internal combustion engines - Vocabulary of components and systems - Part 2 : main running parts.)
|
NF E37-004-1986
| 往复式内燃机.发动机部件的术语和定义.第3部分:活门,凸轮轴控制
| (RECIPROCATING INTERNAL COMBUSTION ENGINES. TERMS AND DEFINITIONS OF ENGINES COMPONENTS. PART 2 : CAMSHAFT DRIVE,VALVES AND FUEL PUMP DRIVE AND ACTUATED MECHANISM.)
|
NF E37-005-1987
| 往复式内燃机.发动机部件的术语和定义.第4部分:压缩机,进气和排气循环
| (RECIPROCATING INTERNAL COMBUSTION ENGINES. TERMS AND DEFINITIONS OF ENGINE COMPONENTS. PART 4 : PRESSURE CHARGING AND AIR EXHAUST GAS DUCTING SYSTEMS.)
|
NF E37-006-2003
| 往复式内燃机.零件和系统的词汇.第5部分:冷却系统
| (Reciprocating internal combustion engines - Vocabulary of components and systems - Part 5 : cooling systems.)
|
NF E37-009-1995
| 往复式内燃机.元件和装置的词汇.第9部分:起动装置
| (Reciprocating internal combustion engines. Vocabulary of components and systems. Part 8 : starting systems.)
|
NF E37-010-1997
| 往复式内燃机.元件和装置的词汇.第9部分:控制和监测系统
| (RECIPROCATING INTERNAL COMBUSTION ENGINES. VOCABULARY OF COMPONENTS AND SYSTEMS. PART 9 : CONTROL AND MONITORING SYSTEMS.)
|
NF E37-020-2001
| 往复式内燃机.图形符号
| (Reciprocating internal combustion engines - Graphical symbols.)
|
NF E37-055-1-1997
| 内燃机.手柄起动装置.安全技术要求和检验
| (RECIPROCATING INTERNAL COMBUSTION ENGINES. HANDLE STARTING EQUIPMENT. PART 1 : SAFETY REQUIREMENTS AND TESTS. (EUROPEAN STANDARD EN ISO 11102-1).)
|
NF E37-055-2-1997
| 内燃机.手柄起动装置.第2部分:测量脱扣距离和角度的方法
| (RECIPROCATING INTERNAL COMBUSTION ENGINES. HANDLE STARTING EQUIPMENT. PART 2 : METHOD OF TESTING THE ANGLE OF DISENGAGEMENT. (EUROPEAN STANDARD EN ISO 11102-2).)
|
NF E37-101-1-1998
| 往复式内燃机.安全.第1部分:压缩内燃机
| (RECIPROCATING INTERNAL COMBUSTION ENGINES. SAFETY. PART 1 : COMPRESSION IGNITION ENGINES. (EUROPEAN STANDARD EN 1679-1).)
|
NF E37-200-2002
| 往复式内燃机.性能.第1部分:功率、燃料消耗量和润滑油消耗量和试验方法说明.通用内燃机的附加要求
| (Reciprocating internal combustion engines - Performances - Part 1 : Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use)
|
NF E37-202-1987
| 往复式内燃机.性能.试验性测量
| (Reciprocating internal combustion engines. Performances. Test measurements.)
|
NF E37-204-1991
| 活塞式内燃机.规定.第6部分:过速防护
| (Reciprocating internal combustion engines. Performance. Part 6 : overspeed protection.)
|
NF E37-205-1984
| 往复式内燃机.按使用情况分类
| (Reciprocating internal combustion engines. Service classes.)
|
NF E37-210-1998
| 往复式内燃机.防火
| (Reciprocating internal combustion engines. Fire protection.)
|
NF E37-211-1-1997
| 往复式内燃机.废气排放测量.第1部分:气体和颗粒废气排放的试验床测定
| (Reciprocating internal combustion engines. Exhaust emission measurement. Part 1 : test-bed measurement of gaseous and particulate exhaust emissions.)
|
NF E37-211-10-2003
| 往复式内燃机.排放测量.第10部分:压燃式发动机瞬态工况排气烟度现场测量用试验周期和试验方法
| (Reciprocating internal combustion engines - Exhaust emission measurement - Part 10 : test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engi)
|
NF E37-211-2-1996
| 往复式内燃机.排气污染测定.第2部分:气体和颗粒物质排放污染的现场测量
| (Reciprocating internal combustion engines. Exhaust emission measurement. Part 2 : measurement of gaseous and particulate exhaust emissions at site.)
|
NF E37-211-4-1996
| 往复式内燃机.排气污染测量.第4部分:不同发动机应用的试验周期
| (Reciprocating internal combustion engines. Exhaust emission measurement. Part 4 : test cycles for different engine applications.)
|
NF E37-211-5-1997
| 往复式内燃机.废气排放测量.第5部分:试验燃料
| (Reciprocating internal combustion engines. Exhaust emission measurement. Part 5 : test fuels.)
|
NF E37-211-6-2000
| 往复式内燃机.废气排放的测量. 第6部分:测量结果和试验的报告
| (Reciprocating internal combustion engines - Exhaust emission measurement - Part 6 : report of measuring results and test.)
|
NF E37-211-7-1999
| 往复式内燃机.排气污染测定.第7部分:发动机系列测量
| (Reciprocating internal combustion engines. Exhaust emission measurement. Part 7 : engine family determination.)
|
NF E37-211-8-1999
| 往复式内燃机.排气污染测定.第8部分:发动机组的测量
| (Reciprocating internal combustion engines. Exhaust emission measurement. Part 8 : engine group determination.)
|
NF E37-211-9-2000
| 往复式内燃机.废气排放的测量. 第9部分:瞬间条件下压缩点火引擎内燃气烟雾排放的试验床测量用试验周期和试
| (Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition en)
|
NF E37-212-1998
| 往复式内燃机.声音的接收
| (Reciprocating internal combustion engines. Acoustical acceptance.)
|
NF E37-213-2002
| 往复式内燃机的性能.第5部分:扭振
| (Reciprocating internal combustion engines - Performance - Part 5 : torsional vibrations.)
|
NF E37-216-1997
| 往复式内燃机.周围环境中噪声的测量.工程法和测量方法
| (RECIPROCATING INTERNAL COMBUSTION ENGINES. MEASUREMENT OF EMITTED AIRBORNE NOISE. ENGINEERING METHOD AND SURVEY METHOD.)
|
NF E37-217-2002
| 往复式内燃机.发动机功率的测量和测定方法.符合ISO 8178的废气排放试验的附加要求
| (Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178.)
|
NF E37-218-2002
| 内燃机.发动机功率的测量和检测方法.一般要求
| (Internal combustion engines - Determination and method for the measurement of engine power - General requirements.)
|
NF E37-301-1994
| 往复式内燃机驱动的交流发电机组.第1部分:使用、额定功率和性能
| (Reciprocating internal combustion engine driven alternating current generating sets. Part 1 : application, ratings and performance.)
|
NF E37-304-1994
| 往复式内燃机驱动的交流发电机组.第4部分:控制装置机开关装置
| (Reciprocating internal combustion engine driven alternating current generating sets. Part 4 : controlgear and switchgear.)
|
NF E37-306-1994
| 往复式内燃机驱动的交流发电机组.第6部分:试验方法
| (Reciprocating internal combustion engine driven alternating current generating sets. Part 6 : test methods.)
|
NF E37-307-1995
| 往复式内燃机交互流动式传动装置.第七部分:尺寸和结构的技术性说明
| (Reciprocating internal combustion engine driven alternating current generating sets. Part 7 : technical declarations for specification and design.)
|
NF E37-310-1999
| 往复式内燃机驱动的交流发电机组.第10部分:包络面法测量空气噪声
| (RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN CURRENT GENERATING SETS. PART 10 : MEASUREMENT OF AIRBONE NOISE BY THE ENVELOPING SURFACE METHOD.)
|
NF E37-312-2000
| 由交流发生装置驱动的往复式内燃机.能作为安全安装应急供电的发电装置
| (Reciprocating internal combustionengine driven alternative current generating sets - Generating sets capable of being used as emergency stand-by source for supply of safety installations.)
|
NF E37-351-2001
| 往复式内燃机驱动发电组.安全
| (Reciprocating internal combustion engines driven generating sets - Safety.)
|
NF E37-401-1988
| 内燃机用全流量润滑油滤器的试验方法.第1部分:压降/流量特性
| (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 1 : pressure drop/flow characteristics.)
|
NF E37-402-1988
| 内燃机用全流量润滑油滤器的试验方法.第2部分:旁路滤芯部分的特性
| (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 2 : element by-pass component characteristics.)
|
NF E37-403-1988
| 内燃机用全流量润滑油滤器的试验方法.第3部分:耐高压降和耐高温性
| (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 3 : resistance to high pressure drop and to elevated temperature.)
|
NF E37-406-1988
| 内燃机用全流量润滑油滤器的试验方法.第6部分:静态破裂压力试验
| (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 6 : static burst pressure test.)
|
NF E37-500-1988
| 内燃机.燃气涡轮机.验收试验
| (INTERNAL COMBUSTION MACHINES. GAS TURBINE. ACCEPTANCE TESTS.)
|
NF H96-330-2-1998
| 自动装卸车安全.电气要求.第2部分:内燃机驱动的卡车的一般要求
| (SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 2 : GENERAL REQUIREMENTS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-2).)
|
NF H96-330-3-1998
| 自动装卸车安全.电气要求.第3部分:内燃机驱动的卡车的电动传输系统特殊要求
| (SAFETY OF INDUSTRIAL TRUCKS. ELECTRICAL REQUIREMENTS. PART 3 : SPECIFIC REQUIREMENTS FOR THE ELECTRIC POWER TRANSMISSION SYSTEMS OF INTERNAL COMBUSTION ENGINE POWERED TRUCKS. (EUROPEAN STANDARD EN 1175-3).)
|
NF J31-156-2003
| 船舶和海运技术.可通过内燃机车辆的货舱舱位之间的通风量.所需总气流流量的理论计算
| (Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required.)
|
NF R11-002-1978
| 内燃机.汽缸的数字标志
| (INTERNAL COMBUSTION ENGINES. CYLINDER NUMBERING.)
|
NF R11-101-1989
| 往复式内燃机.发动机的飞轮壳.额定尺寸和公差
| (Reciprocating internal combustion engines. Flywheel housings. Nominal dimensions and tolerances.)
|
NF R11-207-1-1989
| 内燃机.活塞环.第1部分:词汇
| (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 1 : VOCABULARY.)
|
NF R11-207-2-1989
| 内燃机.活塞环.第2部分:检测原理
| (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 2 : INSPECTION MEASURING PRINCIPLES.)
|
NF R11-207-3-2002
| 内燃机.活塞环.第3部分:材料规范
| (Internal combustion engines - Piston rings - Part 3 : material specifications.)
|
NF R11-207-4-1989
| 内燃机.活塞环.第4部分:总规范
| (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 4 : GENERAL SPECIFICATIONS.)
|
NF R11-207-5-1989
| 内燃机.活塞环.第5部分:质量要求
| (INTERNAL COMBUSTION ENGINES. PISTON RINGS. PART 5 : QUALITY REQUIREMENTS.)
|
NF R12-102-1992
| 往复式内燃机用离合器箱.公称尺寸和公差
| (CLUTCH HOUSINGS FOR RECIPROCATING INTERNAL COMBUSTION ENGINES. NOMINAL DIMENSIONS AND TOLERANCES.)
|
NF R13-328-1986
| 道路车辆.内燃机.火花塞点火.术语
| (ROAD VEHICLES. INTERNAL COMBUSTION ENGINES. SPARK PLUNG INGNITION. TERMINOLOGY.)
|
NF R16-209-1984
| 道路车辆.压缩点火内燃机水平凸缘燃油过滤器端部.安装尺寸和两次过滤器连接尺寸
| (ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-210-1984
| 公路车辆.压缩点火内燃机垂直凸缘三栓燃油过滤器端部.安装和连接尺寸
| (ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH VERTICAL FLANGE AND THREE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-214-1-1992
| 内燃机.高压注油管用钢管.第1部分:密封冷拔单壁钢管的要求
| (Compression-ignition engines. Steel tubes for high-pressure fuel injection pipes. Part 1 : requirements for seamless cold-drawn single-wall tubes.)
|
NF R16-217-1986
| 道路车辆.压燃内燃机用由定心螺栓固定和带水平法兰的单极燃油滤清器.安装和连接尺寸
| (ROAD VEHICLES. SINGLE FUEL FILTERS WITH HORIZONTAL FLANGES AND CENTRE BOLT FIXING FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-218-1986
| 道路车辆.压燃内燃机用带水平法兰用螺栓固定的燃油滤清器头.安装和连接尺寸
| (ROAD VEHICLES. HEADS FOR SPIN-ON FUEL FILTERS WITH HORIZONTAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-219-1986
| 道路车辆.压燃内燃机用带垂直法兰的燃油滤清器头.安装和连接尺寸
| (ROAD VEHICLES. HEADS FOR FUEL FILTERS WITH VERTICAL FLANGE FOR COMPRESSION IGNITION ENGINES. MOUNTING AND CONNECTING DIMENSIONS.)
|
NF R16-339-1990
| 置于内燃机和压气机入口处的空气分离器.效率试验
| (INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS. PERFORMANCE TESTING.)
|
NF R16-505-1992
| 内燃机.润滑油用自旋式滤油器.尺寸
| (Internal combustion engines. Spin-on filters for lubricating oil. Dimensions.)
|
NF T60-514-2000
| 润滑剂、工业用油和有关产品(L类).分类.第15部分:E系列(内燃机油)
| (Lubricants, industrial oils and related products (class L) - Classification - Part 15 : family E (Internal combustion engine oils).)
|
NF T60-524-2000
| 润滑油、工业润滑油和相关产品(L级).E族(内燃机润滑油).两冲程周期汽油机用油规范(EGB、EGC、EGD类)
| (Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD).)
|
NF U25-517-1997
| 林业机械.便携手扶式内燃机驱动灌木铲除机和草修剪机.安全(欧洲标准EN ISO 11806)
| (Agricultural and forestry machinery. Portable hand-held combustion engine driven brush cutters and grass trimmers. Safety.)
|
NF U34-135-2000
| 林业机械.动力杆式修枝锯的安全要求和试验.第1部分:带内燃机的配件装置
| (Machinery for forestry - Safety requirements and testing for pole mounted powered pruners - Part 1 : units fitted with an integral combustion engine.)
|
编号 | 中文名称 | 英文名称 |