| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 1282-1990 | 润滑脂枪.手动挤压式油枪 | Grease guns; push type-hand gun |
| DIN 1284-1990 | 润滑脂枪.杠杆式滑油枪的润滑脂筒.主要尺寸 | Grease guns; grease cartridges for lever type-hand gun; main dimensions |
| DIN 1442-1963 | 销钉润滑钻孔 | Drilled holes for lubrication of pins |
| DIN 21258-2007 | 采矿用摩擦提升钢索的润滑剂和浸渍剂.安全要求和测试 | Lubricants and impregnating compounds for friction hoist ropes in mining - Safety requirements and testing |
| DIN 24271-1-1982 | 集中润滑系统.第1部分:术语、分类 | Centralized lubrication systems; Terminology, Classification |
| DIN 24271-2-1982 | 集中润滑系统.第2部分:技术图纸的图形符号 | Centralized lubrication systems; Graphic symbols for technical drawings |
| DIN 24271-3-1982 | 集中润滑系统.第3部分:技术数值及单位 | Centralized lubrication systems; Technical quantities and units |
| DIN 24500-5-1971 | 轧制设备.第5部分:轧钢机、轧制用冷却和润滑装置的标识 | Rolling mill equipment; rolling mills for steel, designation for cooling and lubricating plants for the rolling |
| DIN 31655-1-1991 | 滑动轴承.稳定工作条件下液体静压向心滑动轴承.不带排油槽的油润滑滑动轴承的计算 | Plain bearings; hydrostatic plain journal bearings under steady-state conditions; calculation of oil-lubricated plain bearings without drainage grooves |
| DIN 31655-2-1991 | 滑动轴承.稳定工作条件下静压向心滑动轴承.不带排油槽的油润滑滑动轴承计算用特性值 | Plain bearings; hydrostatic plain journal bearings under steady-state conditions; characteristic values for the calculation of oil-lubricated plain bearings without drainage grooves |
| DIN 31656-1-1991 | 滑动轴承.稳定工作条件下液体静压向心滑动轴承.带排油槽的油润滑滑动轴承的计算 | Plain bearings; hydrostatic plain journal bearings under steady-state conditions; calculation of oil-lubricated plain bearings with drainage grooves |
| DIN 31656-2-1991 | 滑动轴承.稳定工作条件下静压向心滑动轴承.带排油槽的油润滑滑动轴承计算用特性值 | Plain bearings; hydrostatic plain journal bearings under steady-state conditions; characteristic values for the calculation of oil-lubricated plain bearings with drainage grooves |
| DIN 31665-1993 | 滑动轴承.轴承金属的试验.静态应力下使用润滑剂时金属的耐腐蚀性 | Plain bearings; testing of bearing metals; resistance to corrosion by lubricants and static conditions |
| DIN 31692-1-1996 | 滑动轴承.第1部分:润滑和润滑监测 | Plain bearings - Part 1: Lubrication and lubrication monitoring |
| DIN 322-1983 | 关节轴承.一般用途的润滑浮环 | Plain bearings; loose lubrication rings for general purposes |
| DIN 3405-1986 | 杯形润滑油嘴 | Lubricating nipples cupped type |
| DIN 3410-1974 | 润滑油排出管嘴.总尺寸和装配尺寸 | Lubricating nipples; overall and fitting dimensions |
| DIN 3411-1972 | 润滑油箱.轻型结构 | Grease box; light construction |
| DIN 3412-1972 | 润滑油箱.重型结构 | Grease box; heavy construction |
| DIN 3536-1994 | 室内设备、煤气分配和煤气输送管道的煤气阀用润滑剂 | Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines |
| DIN 43200-2002 | 电动机用滚柱轴承.维护.安装.润滑.拆卸.清洗和再使用 | Roller bearings for electrical machines of electric vehicles - Preservation, mounting, lubrications, dismounting, cleaning and reutilization |
| DIN 51347-1-2000 | 润滑剂试验.采用Brugger润滑剂试验的边界润滑条件下的试验.第1部分:工作总则 | Testing of lubricants - Testing under boundary lubricating conditions with the Brugger lubricant tester - Part 1: General working principles |
| DIN 51347-2-2000 | 润滑剂试验.采用Brugger润滑剂试验的边界润滑条件下的试验.第2部分.工作总则 | Testing of lubricants - Testing under boundary lubricating conditions with the Brugger lubricant tester - Part 2: General working principles |
| DIN 51350-1-1977 | 润滑剂检验.第1部分:用壳牌公司的四球仪检验的一般工作原则 | Testing of lubricants; testing in the Shell-four-ball tester, general working principles |
| DIN 51350-2-1977 | 润滑剂检验.第2部分:用壳牌公司的四球检测仪检验.液体润滑剂焊接承载力的测定 | Testing of lubricants; testing in the Shell-four-ball tester, determination of welding load of fluid lubricants |
| DIN 51350-3-1977 | 润滑剂检验.第3部分:用壳牌公司的四球检测仪检验.液体润滑剂耐磨损特性的测定 | Testing of lubricants; testing in the Shell four-ball tester, determination of wearing caracteristics of liquid |
| DIN 51350-4-1984 | 润滑剂检验.用壳牌公司的四球试验仪检验.润滑脂焊接载荷的测定 | Testing of lubricants; testing by the Shell four-ball tester; determination of welding load of consistent lubricants |
| DIN 51350-5-1984 | 润滑剂检验.用壳牌公司的四球试验仪检验.润滑脂磨损特性值的测定 | Testing of lubricants; testing by the Shell four-ball tester; determination of wear characteristics for consistent lubricants |
| DIN 51350-6-1996 | 润滑剂试验.壳牌公司四球仪试验.第6部分:带聚合添料的润滑油的切变稳定性测定 | Testing of lubricants - Testing in the Shell four-ball tester - Part 6: Determination of shear stability of lubricating oils containing polymers |
| DIN 51351-2007 | 润滑剂测试.压力管法测定制冷机油絮凝点 | Testing of lubricants - Determination of floc point of refrigerator oils by pressure tube method |
| DIN 51352-1-1985 | 润滑剂的检验.润滑油老化性能的测定.在润滑油中通入空气老化后康拉特逊残碳增加值 | Testing of lubricants; determination of ageing characteristics of lubricating oils; increase in Conradson carbon residue after ageing by passing air through the lubricating oil |
| DIN 51352-2-1985 | 润滑剂检验.润滑油老化性能的测定.在Ｆ2 Ｏ3 存在的情况下润滑油中通入空气老化后的康拉特逊残碳量 | Testing of lubricants; determination of ageing characteristics of lubricating oils; Conradson carbon residue after ageing by passing air through the lubricating oil in the presence of iron(III)oxide |
| DIN 51357-1975 | 润滑剂的试验.对内燃机防腐油酸性中和性能的试验.氢溴酸浸渍试验 | Testing of lubricants; testing of anticorrosion oils for internal combustion engines in respect of acid neutralizing properties, hydrobromic acid immersion test |
| DIN 51358-1996 | 润滑剂试验.发动防腐油防腐性能试验.海水浸泡试验 | Testing of lubricants - Testing of anticorrosion oils for internal combustion engines with respect to corrosion preventing properties, sea water immersion test |
| DIN 51360-1-1985 | 冷却润滑剂的检验.掺水冷却润滑剂防腐性能的测定.第1部分:赫伯特(Herbert)法腐蚀试验 | Testing of cooling lubricants; determination of corrosion preventing characteristics of cooling lubricants mixed with water; Herbert corrosion test |
| DIN 51360-2-1981 | 冷却润滑剂的检验.掺水冷却的润滑剂防腐性能的测定.碎片／滤纸法 | Testing of cooling lubricants; determination of corrosion preventing characteristics of cooling lubricants mixed with water; chip/filter paper method |
| DIN 51363-2-2003 | 石油产品测试.润滑油及润滑油添加剂磷含量测定.第2部分:波长色散Ｘ射线光谱分析法 | Testing of petroleum products - Determination of phosphorus content of lubricating oils and additives - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS) |
| DIN 51363-3-2001 | 石油产品检测.润滑油及润滑油添加剂磷含量测定.第3部分:感应耦合等离子体发射光谱分析法直接测定 | Testing of petroleum products - Determination of phosphorous content of lubricating oils and additives - Part 3: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| DIN 51365-1988 | 润滑剂的试验.使用过的发动机油的总污染物的测定.离心分离法 | Testing of lubricants; determination of total dirt in used engine oils; separation by centrifuging |
| DIN 51369-1981 | 冷却润滑剂的试验.水混合式冷却润滑剂pH值的测定 | Testing of cooling lubricants; Determination of the pH value of water-mixed cooling lubricants |
| DIN 51375-2-2001 | 润滑剂检验.发动机油乙二醇（１．２）含量测定.气相层析法 | Testing of lubricants - Determination of 1,2-ethanediol content of motor oils - Part 2: Gas chromatography |
| DIN 51377-2003 | 润滑剂的试验.用冷起动模拟装置测定-5℃至-35℃低温下发动机油的表观粘度 | Testing of lubricants - Determination of the apparent viscosity of motor oils at low temperature from -5 °C to -35 °C - Using the cold-cranking simulator |
| DIN 51379-2-1990 | 润滑剂检验.润滑油中钼含量的测定.第2部分:波长频散X射线光谱测定分析法 | Testing of lubricants; determination of molybdenum content of lubricating oils; analysis by wavelength dispersive X-ray spectrometry (XRS) |
| DIN 51380-1990 | 润滑剂试验.汽车发动机燃油使用的燃料稀释剂的试验.气相色谱法 | Testing of lubricants; test for fuel diluent in used automotive engine oils; gas chromatography method |
| DIN 51385-1991 | 润滑剂.金属加工冷却流体.术语 | Lubricants; metal working fluids; terms |
| DIN 51389-1-1982 | 润滑剂的测定.叶片泵液压流体的机械检验.第1部分:一般工作原则 | Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; general working principles |
| DIN 51389-2-1982 | 润滑剂的测定.叶片泵液压流体的机械检验.第2部分:无水液压流体的 A 方法 | Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; method A foranhydrous hydraulic fluids |
| DIN 51389-3-1998 | 润滑剂的检测.叶轮泵中液压流体的机械试验.第3部分:含水不易燃液压流体的B试验方法 | Determination of lubricants - Mechanical testing of hydraulic fluids in the vane-cell-pump - Part 3: Method B for aqueous not easily inflammable hydraulic fluids |
| DIN 51391-1-1997 | 润滑剂试验.添加元素含量测定.原子吸收光谱法直接测定 | Testing of lubricants - Determination of additive elements - Part 1: Direct determination by atomic absorption spectrometry |
| DIN 51391-2-1994 | 润滑剂检验.添加元素含量的测定.用波长弥散Ｘ射线光谱测定法 | Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS) |
| DIN 51391-3-2004 | 润滑剂的检验.添加元素含量的测定.第3部分:用感应耦合等离子体光发散光谱分析法(ICP OES)直接测定Ca、Mg、Z | Testing of lubricants - Determination of the content of additive elements - Part 3: Direct determination of Ca, Mg, Zn and Ba by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| DIN 51394-1984 | 润滑剂的试验.低粘性润滑油防氧化和防腐蚀性能的试验 | Testing of lubricants; testing of low-viscosity lubricating oils for oxidation and corrosion inhibiting properties |
| DIN 51396-1-2005 | 润滑剂试验.磨损部件的测定.第1部分:用感应耦合等离子体发射光谱分析法(ICP OES)直接测定 | Testing of lubricants - Determination of wear elements - Part?1: Direct determination by inductively coupled plasma optical emission spectroscopy (ICP-OES) |
| DIN 51396-2-1998 | 润滑剂的试验.磨损元件的测定.第2部分:波长弥散X射线荧光分析(XRS) | Testing of lubricants - Determination of wear elements - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRS) |
| DIN 51398-1983 | 润滑剂试验；用Brookfield－粘度计测定低温表观粘度（液体浴法）的程序 | Testing of lubricants; procedure for measurement of low temperature apparent viscosity by means of the Brookfield viscometer (liquid bath method) |
| DIN 51417-2-1997 | 冷却润滑剂试验.掺水冷却润滑剂中矿物油含量测定.第5部分:柱状色谱法 | Testing of metal working fluids - Determination of mineral oil content of water mix metal working fluids - Part 2: Column chromatography method |
| DIN 51431-1-1997 | 润滑剂试验.镁含量测定.第1部分:原子吸收光谱法(AAS)直接测定 | Testing of lubricants - Determination of the magnesium content - Part 1: Direct determination by atomic absorption spectrometry |
| DIN 51431-2-2004 | 润滑剂的检验.镁含量测定.第2部分:波长色散的X射线光谱分析法(XRF) | Testing of lubricants - Determination of the magnesium content - Part 2: Analysis by wavelength dispersive X-ray spectrometry (XRF) |
| DIN 51443-1992 | 润滑剂的试验.润滑油中硼含量的测定.用原子吸收光谱法直接测定 | Testing of lubricants; determination of the boron content in lubricating oils; direct determination by Atomic Absorption Spectrometry (AAS) |
| DIN 51443-2-2001 | 润滑剂试验.硼含量测定.第2部分:通过感应耦合等离子体用光发射光谱分析直接测定 | Testing of lubricants - Determination of the boron content - Part 2: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| DIN 51452-1994 | 润滑剂的试验.柴油机废油中油垢含量的测定.红外线光谱法 | Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry |
| DIN 51453-2004 | 润滑剂试验.使用过的发动机油的氧化和硝化作用的测定.红外线光谱法 | Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method |
| DIN 51502-1990 | 润滑剂的牌号和润滑剂容器的标记.润滑剂的符号、设备和润滑点 | Designation of lubricants and marking of lubricant containers, equipment and lubricating points |
| DIN 51503-1-1997 | 润滑剂.冷却机油.第1部分:规范 | Lubricants - Refrigerator oils - Part 1: Specifications |
| DIN 51503-2-1998 | 润滑剂.冷冻机油.第2部分:使用过的冷冻机油 | Lubricants - Refrigerator oils - Part 2: Used refrigerator oils |
| DIN 51506-1985 | 润滑剂.有和无添加剂的ＶＢ和ＶＣ型以及ＶＤＬ型润滑油.分类和要求 | Lubricants; VB and VC lubricating oils with and without additives and VDL lubricating oils; classification and requirements |
| DIN 51509-1-1976 | 齿轮润滑剂的选择.齿轮润滑油 | Selection of lubricants for gears; gear lubricating oils |
| DIN 51509-2-1988 | 润滑剂.齿轮传动用润滑剂的选择.第2部分:半流体润滑剂 | Lubricants; selection for lubricants for gears; semi-fluid lubricants |
| DIN 51514-1996 | 润滑剂试验.压力管法测定制冷剂中制冷机油的混合空隙 | Testing of lubricants - Determination of the mixture gap of refrigerator oil in refrigerants by pressure tube method |
| DIN 51515-1-2001 | 汽轮机用润滑剂和调速液规范.第1部分:一般应用的L-TD.规范 | Lubricants and governor fluids for turbines - Specifications - Part 1: L-TD for normal service; Specifications |
| DIN 51515-2-2004 | 汽轮机用润滑剂和调速液.第2部分:高温服务用L-TG规范 | Lubricants and governor fluids for turbines - Part 2: L-TG for higher temperature service, Specifications |
| DIN 51517-1-2004 | 润滑剂.润滑油.第1部分:润滑油C.要求 | Lubricants - Lubricating oils - Part 1: Lubricating oils C; Requirements |
| DIN 51517-2 Berichtigung 1-2005 | CL型润滑油.第2部分:要求和试验.对DIN 51517-2-2004勘误1 | Type CL lubricating oils - Part 2: Requirements and testing, Corrigendum 1 to DIN 51517-2:2004-01 |
| DIN 51517-2-2004 | 润滑剂.润滑油.第2部分:CL型润滑油.规范 | Lubricants - Lubricating oils - Part 2: Lubricating oils CL; Specifications |
| DIN 51517-3 Berichtigung 1-2005 | CLP型润滑油.第3部分:要求和试验.对DIN 51517-3-2004的勘误1 | Type CLP lubricating oils - Part 3: Requirements and testing, Corrigendum 1 to DIN 51517-3:2004-01 |
| DIN 51517-3-2004 | 润滑剂.润滑油.第3部分:润滑油CLP.规范 | Lubricants - Lubricating oils - Part 3: Lubricating oils CLP; Specifications |
| DIN 51519-1998 | 润滑剂.工业用液体润滑剂的ISO粘度分类 | Lubricants - ISO viscosity classification for industrial liquid lubricants |
| DIN 51520-1995 | 润滑剂.金属加工流体.纯切割润滑油 (不含水流体) SN.规范 | Lubricants - Metalworking fluids - Straight cutting oils (non aqueous fluids) SN; specifications |
| DIN 51521-1999 | 润滑剂.金属加工润滑油.掺水金属加工润滑油SE.规范 | Lubricants - Metal working fluids - Water mix metal working fluids SE; specifications |
| DIN 51538-1998 | 润滑剂试验.冷冻机油耐氨性能的试验 | Testing of lubricants - Testing of resistance of refrigerator oils to ammonia |
| DIN 51551-1-1993 | 润滑剂和液体燃料的检验.用Conradson法测定残余碳 | Testing of lubricants and liquid fuels; determination of the carbon residue; Conradson method |
| DIN 51574-2004 | 润滑剂检验.内燃机润滑油取样 | Testing of lubricants - Sampling of lubricating oils from internal combustion engines |
| DIN 51589-1-1991 | 第1部分:润滑油脱水能力和液体接触蒸汽后低可燃性的测定 | Determination of water separation ability of lubricating oils and low-flammability fluids after contact with steam |
| DIN 51784-1983 | 液体燃料检验.通过用蒸汽喷射法测定油气中析出胶质含量的试验来测定加润滑油的气油中润滑剂的含量 | Testing of liquid fuels; determination of content of lubricating oils of lubricated petrol on the determination of test gum content in hydrocarbons by jet evaporation |
| DIN 51802-1990 | 润滑脂的试验.用ＳＫＦ－Ｅmcor方法进行润滑脂防腐性能试验. | Testing lubricating greases for their corrosion-inhibiting properties by the SKF Emcor method |
| DIN 51805-1974 | 润滑剂试验.润滑脂流动压力的测定.耐蚀试验（Ｋesternich ）法 | Testing of lubricants; determination of flow pressure of lubricating greases, Kesternich method |
| DIN 51807-1-1979 | 润滑剂检验.在有水的情况下润滑脂性能的测定.静态检验 | Testing of lubricants; Test of the behaviour of lubricating greases in the presence of water; Static test |
| DIN 51807-2-1990 | 润滑剂的检验.在有水的情况下润滑脂性能的检验.动态试验 | Testing of lubricants; test on the behaviour of greases in the presence of water; dynamic test |
| DIN 51808-1978 | 润滑剂检验.润滑剂抗氧化性的测定.氧气法 | Testing of lubricants; determination of oxidation stability of greases, oxygen method |
| DIN 51810-1-2007 | 润滑剂测试.用旋转粘度计测定润滑脂的剪切粘度.第1部分:锥/板系统 | Testing of lubricants - Determination of shear viscosity of lubricating greases by rotational viscosimeter - Part 1: System of cone/plate |
| DIN 51811-1991 | 润滑剂试验.润滑脂对铜腐蚀作用的试验.铜带去光泽试验 | Testing of lubricants; testing of corrosiveness to copper of greases; copper strip tarnish test |
| DIN 51813-1989 | 润滑脂固体物质(颗粒大小超过25μm)含量的测定 | Determination of solid matter content of lubricating greases (particle sizes above 25 m) |
| DIN 51814-1981 | 润滑剂检验.润滑脂中矿物油百分含量和皂质成份的测定.渗析法 | Testing of lubricants; determination of mineral oil fraction and soap of lubricating greases; dialysis method |
| DIN 51815-1-1981 | 润滑剂检验.润滑脂中锂.钠.钙含量的测定.原子吸收光谱法 | Testing of lubricants; determination of the content of lithium, sodium and calcium of greases; determination by atomic absorption spectroscopy |
| DIN 51817-1998 | 润滑剂试验.静态条件下从润滑脂中分离出油的测定 | Testing of lubricants - Determination of oil separation from greases under static conditions |
| DIN 51818-1981 | 润滑剂.润滑脂稠度分类.NLGI等级 | Lubricants; consistency classification of lubricating greases; NLGI grades |
| DIN 51819-1-1999 | 润滑脂检验.滚柱轴承试验仪FE8中的机械-动脂试验.第1部分:一般工作原理 | Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles |
| DIN 51819-2-1999 | 润滑脂检验.滚柱轴承试验仪FE8中的机械-动载荷试验.第2部分:斜向滚珠轴承或锥形滚柱轴承润滑脂试验方法 | Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 2: Test method for lubricating greases, oblique ball bearing or tapered roller bearing |
| DIN 51819-3-2005 | 润滑剂的试验.滚柱轴承试验仪FE8中的机械-动态试验.第5部分:轴向滚柱轴承用润滑油的试验方法 | Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils, axial cylindrical roller bearing |
| DIN 51820-1-1989 | 润滑剂检验.采用红外线光谱测定法对润滑脂的分析.第3部分:拍摄和分析红外线光谱 | Testing of lubricants; analysis of greases by infrared spectrometry; taking and evaluating an infrared spectrum |
| DIN 51821-1-1988 | 润滑剂的检验.使用 FAG 滚动轴承润滑脂检验机 FE9 试验.第1部分:一般工作原则 | Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9; general working principles |
| DIN 51821-2-1989 | 润滑剂的检验.使用 FAG 滚动轴承润滑脂检验机 FE9 试验.第2部分:试验方法 A/1500/6000 | Testing of lubricants; test using the FAG roller bearing grease testing apparatus FE9; test method A/1500/6000 |
| DIN 51825-2004 | 润滑剂.润滑脂K.分类和要求 | Lubricants - Lubricating greases K - Classification and requirements |
| DIN 51826-2005 | 润滑剂.润滑脂G.分类和要求 | Lubricants - Lubricating greases G - Classification and requirements |
| DIN 51828-1-2000 | 润滑剂和相关产品检验.快速生物降解能力测定.第1部分:总则 | Testing of lubricants and related products - Determination of the rapid biodegradability - Part 1: General |
| DIN 51834-1-2004 | 润滑剂检验.移动式振动检验仪中的摩擦试验.第1部分:一般工作原理 | Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 1: General working principles |
| DIN 51834-2-2004 | 润滑剂检验.移动式振动检验仪中的摩擦试验.第2部分:测定润滑油的摩擦值和磨损值 | Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2: Determination of friction and wear data for lubricating oils |
| DIN 51834-3-2001 | 润滑剂检验.移动式振动检验仪摩擦检验.第3部分:与润滑剂联合使用的材料摩擦特性测定 | Testing of lubricants - Tribological test in translatory oscillation apparatus - Part 3: Determination of tribological behaviour of materials in co-operation with lubricants |
| DIN 58395-1976 | 光学仪器用润滑剂的温度范围 | Temperature ranges for lubricants for optical instruments |
| DIN 58396-2-1977 | 光学仪器用润滑脂.第2部分:最低要求 | Greases for optical instruments; minimum requirements |
| DIN 58397-1-1983 | 精密机械和光学仪器用润滑脂的检验.汽化损失 | Testing of lubricating greases for precision engineering and optical instruments; evaporation loss |
| DIN 58397-2-1983 | 精密机械和光学仪器用润滑脂的检验.涂铺 | Testing of lubricating greases for precision engineering and optical instruments; spreading |
| DIN 62136-1 Bb.1-2000 | 纺织机械和附件.纬编独立针织机用针和沉降片润滑油.第1部分:矿物油基润滑油的最低要求.塑料制机械零件耐针 | Textile machinery and accessories - Needle and sinker lubricating oils for weft knitting independent needle machines - Part 1: Minimum requirements of mineral oil based; examples for resistance of machine parts made from plastics against needle and sinker lubricating oils |
| DIN 62136-1-2000 | 纺织机械和附件.纬编独立针织机用针和沉降片润滑油.第1部分:矿物油基润滑油的最低要求 | Textile machinery and accessories - Needle and sinker lubricating oils for weft knitting independent needle machines - Part 1: Minimum requirements of mineral oil based |
| DIN 62136-2 Bb.1-2004 | 纺织机械和附件.纬编独立单针刺绣机用针和沉降片润滑油.第2部分:合成油的最低要求.塑料制机械零件耐针和沉 | Textile machinery and accessories - Needle and sinker lubrication oils for weft knitting independent needle machines - Part 2: Minimum requirements of synthetic oil based - Examples for resistance of machine parts made from plastics against needle and sinker lubrication oils |
| DIN 62136-2-2004 | 纺织机械和附件.纬编独立单针刺绣机用针和沉降片润滑油.第2部分:合成油的最低要求 | Textile machinery and accessories - Needle and sinker lubricating oils for weft knitting independent needle machines - Part 2: Minimum requirements synthetic oil based |
| DIN 6267-1971 | 内燃机润滑方法 | Methods of lubrication for internal combustion engines |
| DIN 65298-1988 | 航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.单接点.连接尺寸.负荷.质量 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; single joints; connection dimensions, loads, masses |
| DIN 65299-1988 | 航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.双万向轴.连接尺寸.负荷.质量 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; double joints; connection dimensions, loads masses |
| DIN 65300-1988 | 航空航天.旋转轴用长期润滑的滚针轴承支承的万向节.技术规范 | Aerospace; universal joints, needle bearing supported, long-time lubricated, for rotary shafts; technical specification |
| DIN 6594-1998 | 转位式刀片用符合DIN 69893-1 A型要求的带空心锥杆和冷却润滑剂导槽的钻头.主要尺寸 | Drills with hollow taper shanks and coolant fluid supply according to DIN 69893-1 type A for indexable inserts - Main dimensions |
| DIN 6596-1998 | 转位式刀片用符合DIN 69893-1 A型要求的带空心锥杆和冷却润滑剂导槽的钻头.标识 | Drills with hollow taper shanks and coolant fluid supply according to DIN 69893-1 type A for indexable inserts - Designation |
| DIN 69001-17-1981 | 机床.多轴头.组合式A型润滑油泵 | Machine tools; multi-spindle heads; building blocks lubrication pumps form A |
| DIN 71412-1987 | 锥形润滑剂注油嘴 | Lubricating nipples; cone type |
| DIN 71455-1980 | 旁路润滑油过滤器的滤芯.尺寸 | Filter inserts for lubrication oil filters, by-pass; dimensions |
| DIN 71457-1978 | 全流离心式润滑油过滤器 | Spin-on filters for lubrication oil, full flow |
| DIN 75203-1988 | 商用汽车的自动集中润滑系统 | Automatic centralized lubrication systems for commercial vehicles |
| DIN 8659-1-1980 | 机床.第1部分:机床用润滑油、润滑油用法说明 | Machine tools; lubrication of machine tools, lubrication instructions |
| DIN 8659-2-1980 | 机床.机床的润滑.切削加工机床用润滑剂的选择 | Machine tools; lubrication of machine tools, selection of lubricants for machine tools operating by removing metal |
| DIN EN 12081-1998 | 铁道应用.轴箱.润滑脂 | Railway applications - Axleboxes - Lubricating greases; German version EN 12081:1998 |
| DIN EN 12634-1999 | 石油制品和润滑剂.酸值的测定.无水介质电位滴定分析法 | Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method; German version EN 12634:1998 |
| DIN EN 14865-2-2006 | 铁路设施.轴套润滑油.第2部分:确保机车速度达到200km/h的机械稳定性试验的办法 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h English version of DIN EN 14865-2:2006-06 |
| DIN EN 15199-1-2007 | 石油产品.用气相色谱法测定沸程分布.第1部分:中间馏出物和润滑基础油 | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils; English version of DIN EN 15199-1:2007-01 |
| DIN EN 2022-1989 | 航空航天.轻型系列、带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷 | Aerospace; bearings, spherical plain, in corrosion resisting steel, with self-lubricating liner, light series; dimensions and loads |
| DIN EN 2023-1989 | 航空航天.公称系列、带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷 | Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liner, normal series; dimensions and loads |
| DIN EN 2064-1992 | 航空航天.带润滑衬套的不锈钢关节轴承.技术规范 | Aerospace series; bearings spherical plain in corrosion resisting steel with self lubricating liner; technical specification; german version EN 2064:1992 |
| DIN EN 2068-1996 | 航空航天系列.带关节轴承和自润滑涂层的吊环端头.交货技术条件 | Aerospace series - Rod ends with self-lubricating, self-aligning bearings - Technical specification; German version EN 2068:1996 |
| DIN EN 2264-1996 | 航空航天系列.合金钢镀镉MoS2润滑带各种深度圆柱形沉头孔双面法兰活动式自锁铆接螺母.等级:900MPa(室温)/23 | Aerospace series - Nuts, anchor, self-locking, floating, two lug, incremental counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2264:1996 |
| DIN EN 2285-1990 | 航空航天系列.带自润滑衬料的铝合金制普通衬套.尺寸和负载 | Aerospace series; bushes plain, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2285:1989 |
| DIN EN 2286-1990 | 航空航天系列.带自润滑衬料的铝合金制有法兰衬套.尺寸和负载 | Aerospace series; bushes flanged, aluminium alloy, with self-lubricating liner; dimensions and loads; German version EN 2286:1989 |
| DIN EN 2287-1990 | 航空航天系列.带自润滑衬料耐蚀钢制普通衬套.尺寸和负载 | Aerospace series; bushes, plain, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2287:1989 |
| DIN EN 2288-1990 | 航空航天系列.带自润滑衬料耐蚀钢制有法兰的套筒.尺寸和负载 | Aerospace series; bushes, flanged, corrosion resisting steel, with self-lubricating liner; dimensions and loads; german version EN 2288:1989 |
| DIN EN 2311-1988 | 航空航天.带自润滑衬垫轴瓦.交货技术条件 | Aerospace series; bushes with self-lubricating liner; technical specification |
| DIN EN 2491-1997 | 航空航天系列.二硫化钼基干膜润滑材料.涂覆方法 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods; German version EN 2491:1997 |
| DIN EN 2498-1991 | 航空航天系列.纹螺杆的自润滑衬层的自校准关节轴承的可调操纵杆端头.尺寸和负荷 | Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads |
| DIN EN 2501-1989 | 航空航天.宽内环的带自润滑内衬的耐蚀钢制关节轴承.尺寸和负荷 | Aerospace series; bearings, spherical plain in corrosion resisting steel, with self-lubricating liners and wide inner ring; dimensions and loads |
| DIN EN 2549-2007 | 航空航天系列.加 MoS<下标2> 润滑剂的阳极氧化钛合金短螺纹公称六角紧公差螺栓.等级:1100MPa(室温)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 2549:2006 |
| DIN EN 2584-2002 | 航空航天系列.带自动润滑内衬的耐腐蚀钢制球面滑动轴承.窄系列:室温下提高的负荷:尺寸和负载; 德文版本 EN | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series; Elevated loads at ambient temperature; Dimensions and loads; German version EN 2584:2001 |
| DIN EN 2585-2006 | 航空航天系列.室温条件下高负荷、宽系列、带自润滑衬套的耐蚀钢关节轴承.尺寸和负载 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 2585:2001 |
| DIN EN 2647-2007 | 航空航天系列.镀隔合金钢加 MoS<下标2> 润滑剂的球形座自锁六角螺母.等级:900MPa(环境温度)/235℃ | Aerospace series - Nuts, hexagonal, self-locking, ball seat, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2647:2006 |
| DIN EN 2680-2007 | 航空和航天系列.米制系列MOS2润滑的钝化镀镉合金钢双耳自准、锁紧浮动地脚螺母.等级:900MPa/235℃ | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning, two lug, in alloy steel, cadmium plated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2680:2006 |
| DIN EN 2753-1996 | 航空航天系列.合金钢镀镉MoS(角注2)润滑带圆柱形沉头孔单面法兰自锁铆接螺母.等级 1100MPa(室温)/235℃ | Aerospace series - Nuts, anchor, self-locking, fixed, single lug, with counterbore, in alloy steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 2753:1996 |
| DIN EN 2790-1991 | 航空航天系列.啮合长度为螺纹直径1.5倍的螺纹杆的带自润滑内衬的自校准的可调节控制杆端部.尺寸和负载 | Aerospace series; rod-ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank, with engagement: 1,5 × thread diameter; dimensions and loads; german version EN 2790:1991 |
| DIN EN 2870-1996 | 航空航天系列.钛合金阳极化MoS2润滑十二角紧配合螺丝.等级 1100MPa(室温)/315℃ | Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996 |
| DIN EN 2881-2007 | 航空和航天系列.米制系列MOS2润滑的钝化耐腐蚀、耐燃钢沉头双耳密封锁紧浮动地脚螺母.等级:900MPa/120℃ | Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS<(Index)2> lubricated, metric series - Classification: 900 MPa (at ambient temperature)/120 °C; German and English version EN 2881:2006 |
| DIN EN 2884-1996 | 航空航天系列.MoS2润滑阳极化钛合金短螺纹带翼型十字槽平头螺钉.等级:1100MPa(室温)/315℃ | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996 |
| DIN EN 3026-1994 | 航空航天.干膜润滑的试验方法.钢试样的腐蚀试验 | Aerospace series; test method for dry film lubricants; corrosion test on steels specimens; German version EN 3026:1994 |
| DIN EN 3027-1994 | 航空航天.干膜润滑的试验方法.盐雾试验 | Aerospace series; test method for dry film lubricants; salt spray test; German version EN 3027:1994 |
| DIN EN 3030-1994 | 航空航天.干膜润滑的试验方法.固体含量 | Aerospace series; test method for dry film lubricants; solids content; German version EN 3030:1994 |
| DIN EN 3032-1994 | 航空航天.干膜润滑的试验方法.厚度测量 | Aerospace series; test method for dry film lubricants; thickness measurement; German version EN 3032:1994 |
| DIN EN 3048-2006 | 航空航天系列.室温条件下高负荷、轻系列、带自润滑衬套的耐蚀钢关节轴承.尺寸和负载 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads; German and English version EN 3048:2001 |
| DIN EN 3306-1996 | 航空航天系列.钛合金阳极化MoS2润滑短螺纹接近顶点带翼形十字槽的100度沉头螺丝.等级: 1100MPa/315℃ | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996 |
| DIN EN 3308-1996 | 航空航天系列.钛合金阳极化MoS2润滑螺纹接近顶点的六角螺丝.等级:1100MPa/315℃ | Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996 |
| DIN EN 3536-2007 | 航空航天系列.MoS<(指数)2>润滑的自锁耐热钢六角螺母.等级:1100MPa(室温)/315℃ | Aerospace series - Nuts, hexagon, self-locking, in heat resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 3536:2006 |
| DIN EN 3626-2007 | 航空航天系列.MoS<(指数)2>润滑的镀镉钢制自锁六角螺母.等级:1100MPa(室温)/235℃ | Aerospace series - Nuts, hexagon, self-locking in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3626:2006 |
| DIN EN 3712-2007 | 航空航天系列.MoS2润滑的镀镉钢制沉孔缩径固定式单耳自锁紧系紧螺母.分类:1100MPa(室温)/235℃ | Aerospace series - Nuts, anchor, self-locking, one lug, fixed, reduced series, with counterbore, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 3712:2007 |
| DIN EN 377-1999 | 非工业加工使用的燃气器具及其调节装置的润滑剂 | Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes (includes Amendment A1:1996); German version EN 377:1993 + A1:1996 |
| DIN EN 3820-2007 | 航空航天系列.MoS2润滑的阳极化钛合金短螺纹标准杆粗公差普通六角头米制螺钉.等级:1100MPa(室温下)/315℃ | Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2006 |
| DIN EN 4040-2006 | 航空航天.宽内环的带自润滑内衬的耐蚀钢制关节轴承.室温高负荷.尺寸和负荷 | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads; German and English version EN 4040:2006 |
| DIN EN 4198-2007 | 航空航天系列.耐腐蚀钢带自润滑衬垫和螺纹柄的可调自动对心滑动轴承的杆端.尺寸和载荷 | Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads; German and English version EN 4198:2006 |
| DIN EN 4311-2007 | 航空航天系列.MoS<(指数)2>润滑耐高温和耐腐蚀钢的中长螺纹粗公差递减柄螺栓.等级:1100MPa(室温)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4311:2006 |
| DIN EN 4591-2007 | 航空航天系列.MoS2润滑的耐高温镍基合金不固定式自准自锁紧圆筒螺母.分类:1550MPa(室温)/315℃ | Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS<(Index)2> lubricated - Classification: 1550 MPa (at ambient temperature)/315 °C; German and English version EN 4591:2005 |
| DIN EN 50326-2003 | 架空线路导线.润滑脂特性; 德文版本 EN 50326:2002 | Conductors for overhead lines - Characteristics of greases; German version EN 50326:2002 |
| DIN EN 61221-2005 | 石油产品和润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications (IEC 61221:2004); German version EN 61221:2004 |
| DIN EN ISO 10438-1-2005 | 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2003); English version EN ISO 10438-1:2003 |
| DIN EN ISO 10438-2-2005 | 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems (ISO 10438-2:2003); English version EN ISO 10438-2:2003 |
| DIN EN ISO 10438-3-2005 | 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems (ISO 10438-3:2003); English version EN ISO 10438-3:2003 |
| DIN EN ISO 10438-4-2005 | 石油、石油化学和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems (ISO 10438-4:2003); English version EN ISO 10438-4:2003 |
| DIN EN ISO 12922-2002 | 润滑剂、工业用油和相关产品(L级).H类(液压体系).HFAE、 HFAS、HFB、HFC、HFDR和HFDU的目录规范 (ISO 12922 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:1999, including Technical Corrigendum 1:2001); German version EN ISO 12922:2002 |
| DIN EN ISO 13944-2006 | 含润滑剂的金属粉末混合物.润滑剂含量测定.改进的索格利特萃取法 | Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method (ISO 13944:1996); English version of DIN EN ISO 13944:2006-06 |
| DIN EN ISO 21469-2006 | 机械安全.与附属产品接触的润滑剂.卫生要求 | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements (ISO 21469:2006); English version of DIN EN ISO 21469:2006-05 |
| DIN EN ISO 6743-4-2002 | 润滑剂、工业用润滑油和相关产品(L类).分类.第4部分:H族(液压系统) | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:1999); German version EN ISO 6743-4:2001 |
| DIN ISO 10792-2-1996 | 航空航天.带自动润滑层的耐腐蚀钢制机身球面滑动轴承.第2部分:英制系列 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series; identical with ISO 10792-2:1995 |
| DIN ISO 10792-3-1996 | 航空航天.带自动润滑层的耐腐蚀钢制机身球面滑动轴承.第3部分:交货技术条件 | Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification; identical with ISO 10792-3:1995 |
| DIN ISO 11009-2007 | 石油产品和润滑剂.润滑脂水冲特性的测定 | Petroleum products and lubricants - Determination of water washout characteristics of lubricating greases (ISO 11009:2000) |
| DIN ISO 12128-1998 | 滑动轴承.润滑孔、润滑槽和润滑衬套.轴承套的尺寸、类型、命名及应用 | Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes; Identical with ISO 12128:1995 |
| DIN ISO 12156-1-1999 | 柴油燃料.高频率往复设备(HFRR)用润滑剂性能评定.第1部分:试验方法 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:1997) |
| DIN ISO 15380-2004 | 润滑油、工业用油和相关产品(L级).H族(液压系统).HETG、HEPG、HEES和HEPR类规范说明 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR (ISO 15380:2002) |
| DIN ISO 2137-1997 | 石油产品.润滑脂和矿脂.锥入度测定 | Petroleum products - Lubricating grease and petrolatum Determination of cone penetration (ISO 2137:1985) |
| DIN ISO 2176-1997 | 石油产品.润滑脂.滴点测定 | Petroleum products - Lubricating grease - Determination of dropping point (ISO 2176:1995) |
| DIN ISO 3547-3-2000 | 滑动轴承.卷制轴套.第3部分:润滑油孔、油槽和油穴 | Plain bearings - Wrapped bushes - Part 3: Lubrication holes, lubrication grooves and lubrication indentations (ISO 3547-3:1999) |
| DIN ISO 413-1987 | 航空航天.润滑油加油管嘴头 | Aircraft; heads of lubricating nipples; identical with ISO 413, edition 1974 |
| DIN ISO 4378-3-1999 | 关节轴承.术语、定义和分类.第3部分:润滑 | Plain bearings - Terms, definitions and classification - Part 3: Lubrication (ISO 4378-3:1983) |
| DIN ISO 5170-1980 | 机床.润滑系统 | Machine tools; lubrication systems |
| DIN ISO 6415-1992 | 内燃机.润滑油旋接式油滤.尺寸 | Internal combustion engines; spin-on filters for lubricating oil; dimensions; identical with ISO 6415:1990 |
| DIN ISO 6743-0-1991 | 润滑剂、工业用润滑油和有关产品(L类).分类.总则 | Lubrificants, industrial oils and related products (class L); classification; general; identical with ISO 6743-0:1981 |
| DIN ISO 6743-12-1995 | 润滑剂、工业用油和相关产品(L 类).分类.第12部分:Q 系列(传热流体); 等同采用 ISO 6743-12:1989 | Lubricants, industrial oils and related products (class L) - Classification - Part 12: Family Q (heat transfer fluids); identical with ISO 6743-12:1989 |
| DIN ISO 7120 Berichtigung 1-2007 | 石油产品和润滑剂.石油润滑油和其他液体.在含水情况下防锈特性的测定.DIN ISO 7120-2000技术勘误 | Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the resence of water (ISO 7120:1987), Corrigenda to DIN ISO 7120:2000-05 |
| DIN ISO 7120-2000 | 石油产品和润滑剂.石油润滑油和其他液体.在含水情况下防锈性能的测定 | Petroleum products and lubricants - Petroleum oils and other fluids - Determination of rust-preventing characteristics in the presence of water (ISO 7120:1987) |
| DIN ISO 7905-1-1998 | 关节轴承.轴承疲劳强度.第1部分:液体润滑条件下在试验台上的和使用中的关节轴承 | Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication (ISO 7905-1:1995) |
| 编号 | 中文名称 | 英文名称 |