ISO润滑油标准(ISO lubrication standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
IEC 60962-1988 汽轮机用石油润滑油的维护与使用指南 Maintenance and use guide for petroleum lubricating oils for steam turbines
IEC 61221-2004 石油产品和润滑剂.三芳基磷酸酯涡轮机控制液(ISO-L-TCD类).规范 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications
ISO 10050-2005 润滑剂、工业润滑油和相关产品(L类).T(涡轮机)族.三芳基磷酸脂涡轮机控制液体规范(类别 ISO-L-TCD) Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
ISO 10129-2006 滑动轴承.轴承金属的试验.静态条件下润滑油的耐腐蚀性 Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions
ISO 10438-1-2003 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第1部分:一般要求 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements
ISO 10438-2-2003 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第2部分:专用油系统 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems
ISO 10438-3-2003 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第3部分:通用油系统 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems
ISO 10438-4-2003 石油、化工和天然气工业.润滑、油封、控油系统和辅助装置.第4部分:自动气封支撑系统 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems
ISO 10792-1-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第1部分:米制系列 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 1: Metric series
ISO 10792-2-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第2部分:英制系列 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 2: Inch series
ISO 10792-3-1995 航空航天 飞机结构用不锈钢自润滑球面滑动轴承 第3部分:技术规范 Aerospace - Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner - Part 3: Technical specification
ISO 11007-1997 石油产品和润滑剂 润滑脂防锈性能的测定 Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases
ISO 11009-2000 石油产品和润滑剂 润滑脂抗水淋特性的测定 Petroleum products and lubricants - Determination of water washout characteristics of lubricating greases
ISO 11158-1997 润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HH、HL、HM、HR、HV和HG各品种的规格 Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG
ISO 12128-2001 滑动轴承 润滑油孔、油槽和油穴 尺寸、类型、标记及其应用 Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes
ISO 12156-1-2006 柴油.使用高频往复装置(HFRR)进行润滑油评定.第1部分:试验方法 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method
ISO 12156-2-2007 柴油.使用高频往复装置(HFRR)进行润滑评估.第2部分:限值 Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 2: Limit
ISO 12167-1-2001 滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第1部分:带有排泄槽的润滑油滑动轴颈轴承的计算 Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves
ISO 12167-2-2001 滑动轴承 静态条件下带有排泄槽的液压滑动轴颈轴承 第2部分:带有排泄槽的润滑油滑动轴颈轴承的计算用特 Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves
ISO 12168-1-2001 滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分:不带排泄槽的润滑油滑动轴颈轴承的计算 Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves
ISO 12168-2-2001 滑动轴承 静态条件下不带排泄槽的液压滑动轴颈轴承 第1部分:不带排泄槽的润滑油滑动轴颈轴承的计算用特 Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves
ISO 12922 Technical Corrigendum 1-2001 润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品种的规格 技术勘 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU; Technical Corrigendum 1
ISO 12922-1999 润滑剂、工业润滑油和有关产品(L类) H组(液压系统) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品种的规格 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
ISO 12925-1 Technical Corrigendum 1-2002 润滑剂、工业用油和相关产品(L类).(齿轮)C种.第1部分:密封齿轮系统用润滑剂.技术勘误1 Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems; Technical Corrigendum 1
ISO 12925-1-1996 润滑剂、工业润滑油和有关产品(L类) C组(齿轮) 第1部分:密式齿轮系统用润滑剂规格 Lubricants, industrial oils and related products (class L) - Family C (Gears) - Part 1: Specifications for lubricants for enclosed gear systems
ISO 13357-1-2002 石油产品.润滑油可过滤性测定.第2部分:水中过滤油的程序 Petroleum products - Determination of the filterability of lubricating oils - Part 1: Procedure for oils in the presence of water
ISO 13357-2-2005 石油产品.润滑油的可过滤性测定.第2部分:干性油技术 Petroleum products - Determination of the filterability of lubricating oils - Part 2: Procedure for dry oils
ISO 13737-2004 石油产品和润滑剂.润滑剂脂的低温针入度的测定 Petroleum products and lubricants - Determination of low-temperature cone penetration of lubricating greases
ISO 13738-2000 润滑剂、工业润滑油和有关产品(L类) E组(内燃机油) 二冲程汽油机油规格(EGB、EGC、EGD) Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)
ISO 13944-1996 含润滑剂的金属粉末混合物 润滑剂含量测定 索格利特萃取法 Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method
ISO 14635-3-2005 齿轮.FZG试验程序.第3部分:半流齿轮润滑脂压塑性变形承载能力和耐磨性用A/2、8/50 FZG试验方法 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
ISO 15380-2002 润滑剂、工业用油和相关产品(L类).系列H(液压系统).HETG, HEPG, HEES 和 HEPR类的规范 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR
ISO 18904-2000 成像材料 冲洗过的胶片 测定润滑性方法 Imaging materials - Processed films - Method for determining lubrication
ISO 19378-2003 润滑剂、工业用油和相关产品(L级).机床润滑剂.等级和规范 Lubricants, industrial oils and related products (class L) - Machine-tool lubricants - Categories and specifications
ISO 2137-1985 石油产品 润滑脂和石油脂 锥入度的测定 Petroleum products; Lubricating grease and petrolatum; Determination of cone penetration
ISO 21469-2006 机械安全.与附属产品接触的润滑剂.卫生要求 Safety of machinery - Lubricants with incidental product contact - Hygiene requirements
ISO 2176 Technical Corrigendum 1-2001 石油产品 润滑脂 滴点的测定 技术勘误1 Petroleum products - Lubricating grease - Determination of dropping point; Technical Corrigendum 1
ISO 2176-1995 石油产品 润滑脂 滴点的测定 Petroleum products - Lubricating grease - Determination of dropping point
ISO 24254-2007 润滑剂、工业用油和相关产品(L级).E族(内燃机油).四冲程循环摩托车汽油发动机和相关动力传动系统用油的规范 Lubricants, industrial oils and related products (class L) - Family E (internal combustion engine oils) - Specifications for oils for use in four-stroke cycle motorcycle gasoline engines and associated drivetrains (categories EMA and EMB)
ISO 3046-1-2002 往复式内燃机.性能.第1部分:功率、燃料消耗量和润滑油消耗量和试验方法说明.通用内燃机的附加要求 Reciprocating internal combustion engines - Performance - Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods; Additional requirements for engines for general use
ISO 3156-1976 矿井提升用的绞合钢丝绳 防锈剂、润滑剂和维修保养 特性和试验 Stranded wire ropes for mine hoisting; Impregnating compounds, lubricants and service dressings; Characteristics and tests
ISO 3448 Technical Corrigendum 1-1993 工业液体润滑剂.ISO粘度分级.技术勘误1 Industrial liquid lubricants - ISO vicosity classification; Technical Corrigendum 1
ISO 3448-1992 工业液体润滑剂 ISO粘度分级 Industrial liquid lubricants; ISO vicosity classification
ISO 3547-3-2006 滑动轴承.卷制轴套.第3部分:润滑油孔、油槽和油穴 Plain bearings - Wrapped bushes - Part 3: Lubrication holes, grooves and indentations
ISO 3987-1994 石油产品 润滑油和添加剂 硫酸盐灰分的测定 Petroleum products - Lubricating oils and additives - Determination of sulfated ash
ISO 413-1974 航空器 润滑油加油管嘴的头部 Aircraft; Heads of lubricating nipples
ISO 4346-1977 一般用途钢丝绳 润滑剂 基本要求 Steel wire ropes for general purposes; Lubricants; Basic requirements
ISO 4378-3-1983 滑动轴承 术语、定义和分类 第3部分:润滑 三种语言版 Plain bearings; Terms, definitions and classification; Part 3 : Lubrication Trilingual edition
ISO 5169-1977 机床 润滑说明书的形式 Machine tools; Presentation of lubrication instructions
ISO 5170-1977 机床 润滑系统 Machine tools; Lubrication systems
ISO 6247 Technical Corrigendum 1-1999 石油产品 润滑油发泡特性的测定 技术勘误1 Petroleum products - Determination of foaming characteristics of lubricating oils; Technical Corrigendum 1
ISO 6247-1998 石油产品 润滑油发泡特性的测定 Petroleum products - Determination of foaming characteristics of lubricating oils
ISO 6281-2007 滑动轴承.试验机内流体动压和混合润滑条件下的测试 Plain bearings - Testing under conditions of hydrodynamic and mixed lubrication in test rigs
ISO 6299-1998 石油产品 润滑脂滴点(宽温度范围)的测定 Petroleum products - Determination of dropping point of lubricating greases (wide temperature range)
ISO 6392-1-1996 土方机械 润滑件 第1部分:油杯 Earth-moving machinery - Lubrication fittings - Part 1: Nipple type
ISO 6392-2-1996 土方机械 润滑件 第2部分:黄油枪喷嘴 Earth-moving machinery - Lubrication fittings - Part 2: Grease-gun nozzles
ISO 6415-2005 内燃机.离心式润滑油滤清器.尺寸 Internal combustion engines - Spin-on filters for lubricating oil - Dimensions
ISO 6617-1994 石油基润滑油 老化特性 氧化后残碳变化的测定 Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation
ISO 6618 Technical Corrigendum 1-1999 石油产品和润滑剂.酸和中和碱值的测定.颜色指示剂滴定法.技术勘误1 Petroleum products and lubricants - Determination of acid or base number - Coulour-indicator titration method; Technical Corrigendum 1
ISO 6618-1997 石油产品和润滑剂 酸和中和碱值的测定 颜色指示剂滴定法 Petroleum products and lubricants - Determination of acid or base number - Coulour-indicator titration method
ISO 6619-1988 石油产品和润滑剂 中和值 电位滴定法 Petroleum products and lubricants; neutralization number; potentiometric titration method
ISO 6743-1-2002 润滑剂、工业用润滑油和有关产品(L类).分类.第1部分:A 组(全损耗系统) Lubricants, industrial oils and related products (class L) - Classification - Part 1: Family A (Total loss systems)
ISO 6743-10-1989 润滑剂、工业润滑油和有关产品(L类) 分类 第10部分:Y组(其他) Lubricants, industrial oils and related products (class L); classification; part 10: family Y (miscellaneous)
ISO 6743-11-1990 润滑剂、工业润滑油和有关产品(L类) 分类 第11部分:P组(风动工具) Lubricants, industrial oils and related products (class L); classification; part 11: family P (pneumatic tools)
ISO 6743-12-1989 润滑剂、工业润滑油和有关产品(L类) 分类 第12部分:Q组(热传导液体) Lubricants, industrial oils and related products (class L); classification; part 12: family Q (heat transfer fluids)
ISO 6743-13-2002 润滑剂、工业润滑油和有关产品(L类).分类.第13部分:G组(导轨) Lubricants, industrial oils and related products (class L) - Classification - Part 13: Family G (Slideways)
ISO 6743-14-1994 润滑剂、工业润滑油和有关产品(L类) 分类 第14部分:U组(热处理) Lubricants, industrial oils and related products (class L) - Classification - Part 14: Family U (Head treatment)
ISO 6743-2-1981 润滑剂、工业润滑油和有关产品(L类) 分类 第2部分:F组(锭子轴承、轴承和离合器) Lubricants, industrial oils and related products (class L); Classification; Part 2 : Family F (Spindle bearings, bearings and associated clutches)
ISO 6743-3-2003 润滑剂、工业用润滑油和有关产品(L类).分类.第3部分:D组(压缩机) Lubricants, industrial oils and related products (class L) - Classification - Part 3: Family D (Compressors)
ISO 6743-4-1999 润滑剂、工业润滑油和有关产品(L类) 分类 第4部分:H组(液压系统) Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems)
ISO 6743-5-2006 润滑剂、工业润滑油和相关产品(L类).分类.第5部分:T组(涡轮机) Lubricants, industrial oils and related products (class L) - Classification - Part 5: Family T (Turbines)
ISO 6743-6-1990 润滑剂、工业润滑油和有关产品(L类) 分类 第6部分:C组(齿轮) Lubricants, industrial oils and related products (class L); classification; part 6: family C (gears)
ISO 6743-7-1986 润滑剂、工业润滑油和有关产品(L类) 分类 第7部分:M组(金属加工) Lubricants, industrial oils and related products (class L); Classification; Part 7 : Family M (Metalworking)
ISO 6743-8-1987 润滑剂、工业润滑油和有关产品(L类) 分类 第8部分:R组(防腐蚀临时保护) Lubricants, industrial oils and related products (class L); Classification; Part 8: Family R (Temporary protection against corrosion)
ISO 6743-9-2003 润滑剂、工业用润滑油和相关产品(L类).分类.第9部分:X族(润滑脂) Lubricants, industrial oils and related products (class L) - Classification - Part 9: Family X (Greases)
ISO 6743-99-2002 润滑剂、工业用润滑油和有关产品(L类).分类.第99部分:总则 Lubricants, industrial oils and related products (class L) - Classification - Part 99: General
ISO 7120-1987 石油产品和润滑剂 石油原油和其他液体 水存在时防锈性能的测定 Petroleum products and lubricants; Petroleum oils and other fluids; Determination of rust-preventing characteristics in the presence of water
ISO 7624-1997 石油产品和润滑剂 加抑制剂矿物汽轮机油 氧化稳定性的测定 Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability
ISO 7747-1983 道路车辆 全流式润滑油滤清器的滤芯 尺寸 Road vehicles; Filter elements for full flow oil filters; Dimensions
ISO 7824-1986 造船及海上结构物 润滑油嘴 锥型及平肩型 Shipbuilding and marine structures; Lubrication nipples; Cone and flat types
ISO 7905-1-1995 滑动轴承 轴瓦疲劳强度 第1部分:在液体动压润滑条件下试验台和使用中的滑动轴承 Plain bearings - Bearing fatigue - Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication
ISO 7967-6-2005 往复式内燃机.零部件和系统词汇.第6部分:润滑系统 Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems
ISO 8068-2006 润滑剂、工业润滑油和相关产品(L类).T族(涡轮机).涡轮机用润滑油规范 Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specification for lubricating oils for turbines
ISO 8681-1986 石油产品和润滑剂 分类法 等级的定义 Petroleum products and lubricants; Method of classification; Definition of classes
ISO 9219-2002 航空航天.滑轮用合金钢和镀镉或钛合金钢、MoS<下标2>润滑或耐腐蚀钢和钝化的紧公差柄、短螺纹薄六角头螺栓. Aerospace - Bolts, thin hexagonal head, for pulleys, close tolerance shank, short thread, in alloy steel and cadmium-plated or in titanium alloy steel, MoS<(Index)2> lubricated or in corrosion-resistant steel and passivated - Dimensions and masses
ISO/TS 12927-1999 润滑剂、工业润滑油和有关产品(L级) M组(金属加工) 制定标准导则 Lubricants, industrial oils and related products (class L) - Family M (Metalworking) - Guidelines for establishing specifications
ISO/TS 12928-1999 润滑剂、工业润滑油和有关产品(L级) R组(暂时保护防腐) 制定标准导则 Lubricants, industrial oils and related products (class L) - Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
ISO/TS 23556-2007 去除润滑油中柴油机烟灰用装置的性能试验方法.初始过滤效率 Performance test method for diesel engine soot-removal devices in lubricating oils - Initial filtration efficiency
编号 中文名称 英文名称

返回