| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF A95-701-1977 | 粉末冶金.机械零部件自润滑轴承用金属与合金.规范和试验方法的说明 | (POWDER METALLURGY.METALS AND ALLOYS FOR MECHANICAL PARTS SELF-LUBRICATING BEARINGS. INTERPRETATION OF SPECIFICATIONS AND TEST METHODS.) |
| NF A95-711-1977 | 粉末冶金.机械部件和自润滑轴承用的合金.钢号一般命名规则 | (POWDER METALLURGY. ALLOYS FOR MECHANICAL PARTS AND SELF-LUBRICATING BEARINGS. RULES FOR THE CONVETIONAL DESIGNATION OF GRADES.) |
| NF A95-771-1-1988 | 烧结金属材料.规范.第1部分:用液体润滑剂浸渍的轴承材料 | (Sintered metal materials. Specifications. Part 1 : materials, for bearings, impregnated with liquid lubricant.) |
| NF C27-140-1995 | 石油产品和润滑剂.三重磷酸脂涡轮控制流体.规范 | (Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category iso-L-tcd). Specifications.) |
| NF C27-231-1989 | 蒸汽轮机中石油润滑油的使用和保护指南 | (Maintenance and use guide for petroleum lubricating oils for steam turbines.) |
| NF C34-200-2003 | 架空线路用导线.润滑脂特性 | (Conductors for overhead lines - Characteristics of greases.) |
| NF D36-204-1993 | 除工艺过程用之外的燃气器具和有关控制器的润滑剂 | (LUBRICANTS FOR APPLICATIONS IN APPLIANCES AND ASSOCIATED CONTROLS USING COMBUSTIBLE GASES EXCEPT THOSE DESIGNED FOR USE IN INDUSTRIAL PROCESSES. (EUROPEAN STANDARD EN 377).) |
| NF E22-502-1999 | 滑动轴承.术语,定义和分类.第3部分:润滑 | (Plain bearings. Terms, definitions and classification. Part 3 : lubrication.) |
| NF E22-580-1987 | 滑动轴承.耐磨材料摩擦性能试验.第1部份：带耐磨材料，配料和油的组件在极限润滑条件下摩擦与磨损性能试验 | (PLAIN BEARINGS. TESTING OF THE TRIBOLOGICAL BEHAVIOUR OF BEARING MATERIALS. PART 1 : TESTING OF THE FRICTION AND WEAR BEHAVIOUR OF BEARING MATERIAL/MATING MATERIAL/OIL COMBINATIONS UNDER CONDITIONS OF BOUNDARY LUBRICATION.) |
| NF E28-011-1936 | 传动轴润滑环 | (LUBRICATION RING FOR DRIVING SHAFT.) |
| NF E28-201-1967 | 润滑装置.铰链盖滑脂塞 | (FLIP TOP LUBRICATOR.) |
| NF E28-202-1967 | 润滑装置.转动盖滑脂塞 | (OIL PLUGS WITH ROTATING CAPS.) |
| NF E28-204-1967 | 润滑装置.帽罩式油环 | (STAUFFER LUBRICATORS.) |
| NF E28-205-1967 | 润滑装置.滑油液面计 | (OIL LEVEL.) |
| NF E37-200-2002 | 往复式内燃机.性能.第1部分:功率、燃料消耗量和润滑油消耗量和试验方法说明.通用内燃机的附加要求 | (Reciprocating internal combustion engines - Performances - Part 1 : Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use) |
| NF E37-401-1988 | 内燃机用全流量润滑油滤器的试验方法.第1部分:压降/流量特性 | (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 1 : pressure drop/flow characteristics.) |
| NF E37-402-1988 | 内燃机用全流量润滑油滤器的试验方法.第2部分:旁路滤芯部分的特性 | (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 2 : element by-pass component characteristics.) |
| NF E37-403-1988 | 内燃机用全流量润滑油滤器的试验方法.第3部分:耐高压降和耐高温性 | (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 3 : resistance to high pressure drop and to elevated temperature.) |
| NF E37-406-1988 | 内燃机用全流量润滑油滤器的试验方法.第6部分:静态破裂压力试验 | (Methods of test for full-flow lubricating oil filters for internal combustion engines. Part 6 : static burst pressure test.) |
| NF E48-602-1982 | 润滑油，工业油和相关产品.L级.分类.H系列液压系统 | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS. CLASS L. CLASSIFICATION. FAMILLE H. “HYDRAULIC SYSTEM“.) |
| NF E49-320-1-1998 | 气动液体动力.压缩空气润滑器.第1部分:包含在供应商资料和产品标志要求的主要特性 | (Pneumatic fluid power. Compressed air lubricators. Part 1 : main characteristics to be included in supplier`s literature and product-marking requirements.) |
| NF E49-320-2-1998 | 气动液体动力.压缩空气润滑器.第2部分:测定包含在供应商资料和产品标志要求的主要特性的试验方法 | (Pneumatic fluid power. Compressed air lubricators. Part 2 : test methods to determine the main characteristics to be included in supplier`s literature.) |
| NF E60-202-1996 | 机床.润滑系统 | (Machine-tools. Lubrification systems.) |
| NF E63-076-1974 | 压力机配套工具.导向部件.自动润滑油环 | (PRESS TOOLS - GUIDING ELEMENTS - SELF-OILING RINGS.) |
| NF F19-503-1989 | 铁路车辆.轴箱的滚轴承用润滑脂试验方法.润滑脂氧化稳定性的动态试验 | (RAILWAY ROLLING STOCK. TESTS METHOD OF GREASES FOR AXLE-BOXES TO ROLLING BEARINGS. DYNAMIC TEST FOR STABILITY TO OXYDATION OF GREASE.) |
| NF F19-504-1993 | 铁路车辆.滚动轴承轴箱润滑脂试验方法.“R2F“机润滑稳定性试验 | (RAILWAY ROLLING STOCK. METHOD OF TEST FOR GREASES FOR ROLLER BEARING AXLE-BOXES. GREASE SUITABILITY TEST ON THE “R2F“ MACHINE.) |
| NF F19-505-1991 | 铁路车辆.转动轴箱用的润滑油试验方法.在试验台上进行振动、碰撞、旋转的强力试验 | (RAILWAY ROLLING STOCK. TESTING METHOD OF GREASES FOR AXLE-BOXES WITH ROLLING BEARINGS. VIBRATIONS,SHOCKS,ROTATION AND PRESSURES ENDURING TEST ON “ROPECACS“ MACHINE.) |
| NF F19-510-1998 | 铁路工具.轴箱.润滑油 | (Railway applications. Axleboxes. Lubricating greases.) |
| NF F19-813-1991 | 铁路机车.轴箱中球面轴承用的润滑油.质量规定 | (RAILWAY ROLLING STOCK. GREASES USED AS LUBRICANTS OF ROLLER BEARING AXLEBOXES. QUALITY REQUIREMENTS.) |
| NF L10-200-1995 | 航空和航天.最大厚度10千分尺的金属衬底表面用不带有粘结材料或填料的干式氟碳润滑剂.涂层配件的质量 | (AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED WITHOUT BINDING MATERIAL OR FILLER, MAXIMUM THICKNESS OF 10 MICROMETER ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.) |
| NF L10-201-1998 | 航空航天工业.金属底层最小厚度5微米的带粘接材料和滤膜的润滑碳氟化合物镀膜.镀膜部分的质量 | (AEROSPACE SERIES. LUBRICATING DRY FLUOROCARBONATED COATING WITH BINDING MATERIAL AND FILLERS, OF A MINIMUM THICKNESS OF 5 MICROMETERS ON METALLIC SUBSTRATE. QUALITY OF COATED PARTS.) |
| NF L10-211-1994 | 航空航天系列.干膜润滑试验方法.钢样抗腐蚀试验(欧洲标准EN 3026) | (Aerospace series. Test method for dry film lubricants. Corrosion test on steel specimens.) |
| NF L10-212-1994 | 航空和航天.干润滑膜的检验方法.盐雾试验(欧洲标准EN 3027) | (Aerospace series. Test method for dry film lubricants. Salt spray test.) |
| NF L10-213-1994 | 航空航天系列.干膜润滑试验方法.实粒含量测量(欧洲标准EN 3030) | (Aerospace series. Test method for dry film lubricants. Solids content.) |
| NF L10-214-1994 | 航空航天系列.干膜润滑试验方法.厚度测量(欧洲标准EN 3032) | (Aerospace series. Test method for dry film lubricants. Thickness measurement.) |
| NF L10-215-1997 | 航空航天系列.二硫化钼干膜润滑油.涂覆法(欧洲标准EN 2491) | (AEROSPACE SERIES. MOLYBDENUM DISULPHIDE DRY LUBRICANTS. COATING METHODS. (EUROPEAN STANDARD EN 2491).) |
| NF L22-512-2001 | 航空螺栓和螺母.MoS2润滑的、镀镉、钢制、带扩孔和系留垫圈的、ISO M或ISO MJ螺纹的自锁定六角螺母.等级:11 | (Aircraft bolts and nuts - Nuts, hexagonal, self-locking, with counterbore and captive washer, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambian) |
| NF L22-519-2000 | 航空用螺栓和螺母.自锁十二角头螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1550MPa(室温)/235℃ | (Aircraft bolts and nuts - Bihexagonal nuts, self-locking, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 235 oC.) |
| NF L22-525-2001 | 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、细螺距螺纹、ISO M螺纹、自锁紧双六角头螺母.等级:1100MPa(室温)/ | (Aircraft bolts and nuts - Nuts, bihexagonal, self-locking, ISO M threads, fine pitch threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) / 235 oC.) |
| NF L22-541-2001 | 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、ISO M或ISO MJ螺纹自锁紧六角头螺母.等级:1100MPa(室温)/235℃或 | () |
| NF L22-567-2001 | 航空螺栓和螺母.钢制、镀镉、MoS2润滑的、ISO M或ISO MJ螺纹、带扩孔的双耳自锁紧固定螺母.等级:1100MPa(室 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambiant temperature) |
| NF L22-568-2000 | 航空用螺栓和螺母.单耳埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperat) |
| NF L22-569-2000 | 航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M ou ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempeer) |
| NF L22-570-2000 | 航空用螺栓和螺母.60度角埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient tempera) |
| NF L22-571-2000 | 航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 | (Aircraft bolts and nuts - Nuts, anchjor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plates, MoS2 lubricated - Classification : 1 100 MPa (at am) |
| NF L22-572-2000 | 航空用螺栓和螺母.单耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-573-2000 | 航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温) | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at) |
| NF L22-574-2000 | 航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/2 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa () |
| NF L22-575-2000 | 航空用螺栓和螺母.双耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambient t) |
| NF L22-576-2000 | 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室温)/235℃ | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, single lug, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 MPa (at ambien) |
| NF L22-577-2000 | 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀镉钢螺纹.MoS2润滑.分类:1100MPa(室 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in steel, cadmium plated, MoS2 lubricated - Classification : 1 100 M) |
| NF L22-587-2000 | 航空用螺栓和螺母.双耳埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/235 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, with counterbore, ISO M ou ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temperatu) |
| NF L22-589-2000 | 航空用螺栓和螺母.90度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/23 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient tempe) |
| NF L22-590-2000 | 航空用螺栓和螺母.60度角埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/42 | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 60 o corner, with counterbore, ISO M ou ISO MJ threads,in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient temper) |
| NF L22-591-2000 | 航空用螺栓和螺母.双耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, two lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosino resisting steel, silver plated - Classification : 1 100 MPa (at a) |
| NF L22-592-2000 | 航空用螺栓和螺母.单耳埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, single lug, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (a) |
| NF L22-593-2000 | 航空用螺栓和螺母.90度角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa | (Aircraft bolts and nuts - Nuts, anchor, self-locking, 90 o corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa () |
| NF L22-594-2000 | 航空用螺栓和螺母.锐角埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa( | (Aircraft bolts and nuts - Nuts, anchor, self-locking, closed corner, reduced series, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa) |
| NF L22-595-2000 | 航空用螺栓和螺母.双耳扁埋头自锁地脚螺母.对比系列.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa | (Aircraft bolts and nuts - Nuts, anchor, self-locking, flatting, two lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambient) |
| NF L22-596-2000 | 航空用螺栓和螺母.单耳浮动埋头自锁地脚螺母.ISO M或ISO MJ镀银耐腐蚀钢螺纹.MoS2润滑.分类:1100MPa(室温)/ | (Aircraft bols and nuts - Nuts, anchor, self-locking, floating, singl lug, with counterbore, ISO M or ISO MJ threads, in corrosion resisting steel, silver plated - Classification : 1 100 MPa (at ambien) |
| NF L22-750-1954 | 润滑轴 | (LUBRICATING PINS. (RECH.).) |
| NF L24-102-1997 | 航空和航天系列.凸台,细六角头,紧配合公差柄,短螺纹,阳极化,MOS2润滑,钛合金制螺栓.等级:1100MPA(室温下)/3 | (Aerospace series. Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 lubricated. Classification : 1100 MPa (at ambient temperature) / 315 degrees celsius.) |
| NF L24-103-1995 | 航空航天系列.阳极化、MOS2润滑的短螺纹紧公差标准手柄标准六角螺栓.分类:1100MPA(环境温度)/315度 | (AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2549).) |
| NF L24-109-1997 | 航空航天系列.阳极化MOS2润滑钛合金制标准六角头、螺纹头螺丝.等级:1100MPA(室温)/315℃(欧洲标准EN 3308) | (AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).) |
| NF L24-134-1997 | 航空和航天系列.100度减径沉头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,MOS2润滑,钛合金制螺丝.等级:1100MP | () |
| NF L24-136-1997 | 航空和航天系列.阳极化MOS2润滑钛制100度标准埋头偏移十字槽、螺纹头螺丝.等级:1100MPA(室温下)/315℃(欧洲 | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3306).) |
| NF L24-182-1996 | 航空和航天.用MoS2润滑,阳极化,钛合金制,短螺纹,带翼型十字槽的平头螺钉.等级:1100MPa(室温下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).) |
| NF L24-186-1997 | 航空和航天系列.平头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,MOS2润滑,钛合金钢制螺丝.等级:1100MPA(室温 | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).) |
| NF L24-188-1997 | 航空和航天系列.平头,偏移十字槽,螺纹到顶部,阳极化,MOS2润滑,钛合金钢制螺丝.等级:1100MPA(室温下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).) |
| NF L24-228-1996 | 航空和航天系列.用MoS2润滑阳极化钛合金制短螺纹紧公差标准柄标准双六角头螺栓.分类:1100MPa(环境温度)/315 | (AEROSPACE SERIES. BOLTS, NORMAL BIHEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2870).) |
| NF L24-469-1997 | 航空和航天系列.合金钢镀镉MOS2润滑深锪孔双耳锁紧浮动地脚螺母.等级:900MPa/235℃(欧洲标准EN 2264) | (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FLOATING, TWO LUG, INCREMENTAL COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2264).) |
| NF L24-472-1996 | 航空和航天系列.带埋头孔的固定锚式单耳自锁镀镉合金钢MOS2润滑螺母.分类.1100MPa(环境温度)/235℃ | (AEROSPACE SERIES. NUTS, ANCHOR, SELF-LOCKING, FIXED, SINGLE LUG, WITH COUNTERBORE, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICAITON : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2753).) |
| NF L24-507-1995 | 航空和航天.自锁镀隔合金钢MOS*2制坡面垫平用润滑六角螺母.等级900MPa/235℃ | (AEROSPACE SERIES. NUTS, HEXAGONAL, SELF-LOCKING, BALL SEAT, IN ALLOY STEEL, CADMIUM PLATED, MOS2 LUBRICATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2647).) |
| NF L29-811-1966 | 轴向连接润滑器 | (Lubricating nipples for shafts.) |
| NF L29-812-1966 | 径向连接润滑器 | (Lubricating nipples for bearings.) |
| NF L31-550-1992 | 航空航天系列.带自调润滑衬套的耐蚀钢关节轴承.技术规范 | (Aerospace series. Bearings spherical plain in corrosion resisting steel with self lubricating liners. Technical specification.) |
| NF L31-553-1988 | 航空和航天系列.自润滑油封防腐球头螺栓和宽内垫圈.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner and wide inner ring. Dimensions and loads.) |
| NF L31-554-1988 | 航空和航天系列.轻系列自润滑油封钢制耐腐蚀球头螺栓的钢球头螺栓 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, light series. Dimensions and loads.) |
| NF L31-555-1988 | 航空和航天系列.标准系列自润滑油封钢制耐腐蚀球头螺栓.尺寸和负载 | (Aerospace series. Bearings-spherical plain in corrosion resisting steel with self-lubricating liner, normal series. Dimensions and loads.) |
| NF L31-556-2002 | 航空和航天系列.室温条件下高负荷、窄系列、带自动润滑层的耐蚀钢球面轴承.尺寸和负载 | (Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Narrow series - Elevated load at ambient temperature - Dimensions and loads.) |
| NF L31-557-2002 | 航空和航天系列.室温条件下高负荷、宽系列、带自动润滑层的耐蚀钢球面轴承.尺寸和负载 | (Aerospace series - Bearing, spherical plain in corrosion resisting steel with self-lubricating liner - Wide series - Elevated load at ambient temperature - Dimensions and loads.) |
| NF L31-558-2002 | 航空和航天系列.室温条件下高负荷、轻系列、带自动润滑层的耐蚀钢球面轴承.尺寸和负载 | (Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions andd loads.) |
| NF L31-601-1987 | 航空和航天系列.自动润滑垫圈.技术规范 | (Aerospace series. Bushes with self-lubricating liner. Technical specification.) |
| NF L31-602-1990 | 航空和航天系列.铝合金圆环.自润滑油封.尺寸和负载 | (AEROSPACE SERIES. BUSHES,PLAIN ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2285).) |
| NF L31-603-1990 | 航空和航天系列.铝合金凸环.自润滑油封.尺寸和负载 | (AEROSPACE SERIES. BUSHES,FLANGED ALUMINIUM ALLOY WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2286).) |
| NF L31-604-1990 | 航空和航天系列.钢质防腐圆环.自润滑油封.尺寸和负载 | (AEROSPACE SERIES. BUSHES,PLAIN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2287).) |
| NF L31-605-1990 | 航空和航天系列.钢制防腐凸环.自润滑油封.尺寸和负载 | (Aerospace series. Bushes, flanged corrosion resisting steel with self-lubricating liner. Dimensions and loads.) |
| NF L35-170-1974 | 有自润滑装置的球形接头.无纵向槽的长螺纹杆.尺寸和负荷 | (ROD-ENDS WITH SELF-LUBRICATING SPHERICAL BEARING - LONG THREADED SHANK WITHOUT KEYWAY - DIMENSIONS AND LOADS.) |
| NF L35-171-1974 | 有自润滑装置的球形接头有纵向槽的长螺纹杆.尺寸和负荷 | (ROD-ENDS WITH SELF-LUBRICATING SPHERICAL BEARING - LONG THREADED SHANK AND KEYWAY - DIMENSIONS AND LOADS.) |
| NF L35-172-1990 | 航空和航天系列.带螺纹杆和自润滑油封球头螺栓的可调底座.尺寸和负载.(欧洲标准 EN 2498) | (AEROSPACE SERIES. ROD ENDS,AJUSTABLE SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AN THREADED SHANK. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2498).) |
| NF L36-222-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的球形可调接头:螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2790) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AND THREADED SHANK WITH ENGAGEMENT : 1,5 THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2790).) |
| NF L36-223-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的单包边可调接头:螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2791) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,SINGLE FORK AND THREADED SHANK WITH ENGAGEMENT : 1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2791).) |
| NF L36-224-1991 | 航空和航天系列.带自润滑油封和螺纹安装杆的双包边可调接头.螺纹直径1.5.尺寸和负荷.(欧洲标准EN 2792) | (AEROSPACE SERIES. ROD ENDS,ADJUSTABLE,DOUBLE FORK AND THREADED SHANK WITH ENGAGEMENT :1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS. (EUROPEAN STANDARD EN 2792).) |
| NF L36-225-1996 | 航空和航天.带关节轴承和自润滑涂层的吊环端头.交货技术条件 | (AEROSPACE SERIES. ROD ENDS WITH SELF-LUBRICATING SELF-ALIGNING BEARINGS. TECHNICAL SPECIFICATION. (EUROPEAN STANDARD EN 2068).) |
| NF L44-550-1978 | 润滑油压力注入接头 | (Pressure re-oiling connection.) |
| NF M07-019-1994 | 石油产品和润滑材料.闪点的测定.彭斯克--马丁(Peucky-Martens)闭杯法 | (Retroleum products and lubricants. Determination of flash point. Pensky-martens closed cup method.) |
| NF M07-071-1-2000 | 柴油燃料.使用高频往复装置对润滑性的评价.第1部分:试验方法 | (Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1 : test method.) |
| NF M07-103-2000 | 柴油燃料乳剂中的水.使用高频往复装置对润滑性的评价 | (Water in diesel fuel emulsions - Assessment of lubricity using the high-frequency reciprocating rib (HFRR).) |
| NF M82-661-1963 | 采矿设备.固体润滑剂.使用说明 | (MINING EQUIPMENT. SOLID LUBRICANTS. RECOMMENDATIONS FOR USE.) |
| NF M82-662-1963 | 采矿设备.固体润滑剂.一般特性 | (MINING EQUIPMENT. SOLID LUBRICANTS. GENERAL PROPERTIES.) |
| NF M88-950-1986 | 石油工业.润滑油压射器.尺寸 | (PETROLEUM INDUSTRIE. GREASE CATRIGES. DIMENSIONS.) |
| NF R16-505-1992 | 内燃机.润滑油用自旋式滤油器.尺寸 | (Internal combustion engines. Spin-on filters for lubricating oil. Dimensions.) |
| NF R16-521-1986 | 道路车辆.球面头锥形短螺纹润滑器.尺寸特性 | (Road vehicles. Lubricating spherical heads with short conical screw threads. Dimensional characteristics.) |
| NF S97-034-1998 | 添加润滑剂和医用或非医用的制剂,放在与避孕套接触的部位.相容性.规范和试验方法 | (ADDITIONAL LUBRICANTS AND MEDICINAL OR NON-MEDICINAL PREPARATIONS INTENDED OR LIKELY TO BE PLACED IN CONTACT WITH MALE CONDOMS. COMPATIBILITY. SPECIFICATIONS AND TEST METHODS.) |
| NF T60-102-1996 | 润滑脂.滴点测定 | (Lubricating greases. Determination of the dropping point.) |
| NF T60-103-1968 | 石油产品.润滑脂和燃烧油在密封容器中闪点的测定 | (PETROLEUM PRODUCTS. CLOSED CUP FLASH POINT OF LUBRICANTS AND FUEL OILS.) |
| NF T60-106-2001 | 液态石油产品.未用和使用过的润滑油中杂质、磨损金属和添加元素的测定.感应耦合等离子体原子发射光谱法(ICP | (Liquid petroleum products - Determination of additive elements, wear metals and contaminants in unused and used lubricating oils - Method by inductively coupled plasma atomic emission spectroscopy (IC) |
| NF T60-109-1970 | 石油产品.爆炸法测定石油产品和润滑脂中硫的含量 | (PETROLEUM PRODUCTS. DETERMINATION OF SULPHUR IN PETROLEUM PRODUCTS AND LUBRICANTS BY THE BOMB METHOD.) |
| NF T60-111-1999 | 石油基润滑油.老化特性.用康拉孙(法)测定氧化后残碳的变化 | (Petroleum-based lubricating oils - Ageing characteristics - Determination of change in Conradson carbon residue after oxidation.) |
| NF T60-112-1997 | 石油产品和润滑剂.酸值和碱值的测定.彩色指示剂滴定法 | (Petroleum products and lubricants. Determination of acid or base number. Colour-indicator titration method.) |
| NF T60-129-1998 | 石油产品.润滑油发泡特性的测定 | (Petroleum products. Determination of foaming characteristics of lubricating oils.) |
| NF T60-133-1988 | 石油产品.润滑脂的游离酸度和碱度 | (PETROLEUM PRODUCTS. ACIDITY AND ALKALINITY OF LUBRICANT GREASES.) |
| NF T60-135-1998 | 石油产品和润滑剂.润滑油的防锈特性的测定 | (Petroleum products and lubricants. Determination of rust-prevention characteristics of lubricating greases.) |
| NF T60-139-1970 | 石油产品.润滑脂的表视粘度 | (INDUSTRIAL OILS AND GREASES. APPARENT VISCOSITY OF LUBRICATING GREASE.) |
| NF T60-140-1974 | 石油产品.用四分之一或二分之一标度锥测定润滑脂的针入度 | (CONE PENETRATION OF LUBRICATION GREASE USING ONE-QUARTER OR ONE-HALF SCALE CONE EQUIPMENT.) |
| NF T60-141-1993 | 工业液体润滑剂.ISO粘度分类 | (Industrial liquid lubricants. ISO viscosity classification.) |
| NF T60-144-1974 | 石油产品.润滑脂中硫灰分的测定 | (DETERMINATION OF SULFATED ASH FROM GREASES.) |
| NF T60-157-1982 | 石油产品.润滑油中不溶物质的含量 | (PETROLEUM PRODUCTS. INSOLUBLES CONTENT OF LUBRICATING OILS.) |
| NF T60-162-1985 | 润滑剂、工油和类似产品(L类).分类.O部分: 综合 | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 0 : GENERAL.) |
| NF T60-163-1985 | 润滑剂.工业油和类似产品(L类).分类.第1部分: A类(润滑损耗) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 1 : FAMILY A (TOTAL LOSS SYSTEM).) |
| NF T60-164-1985 | 润滑剂、工业油和类似产品(L类).分类.第2部分: F类(主轴轴承.轴承和亮合离合器 (LUBRICANTS,INDUSTRIAL OIL | (SPINDLE BEARINGS AND ASSOCIATED CLUTCHES).) |
| NF T60-171-1986 | 石油产品.低温下润滑脂锥面的锥入渗透度 | (PETROLEUM PRODUCTS. DETERMINATION OF CONE PENETRATION OF GREASES UNDER LOW TEMPERATURE.) |
| NF T60-189-1995 | 润滑脂.车轮轴承脂的渗漏趋势 | (LUBRICATING GREASES. LEAKAGE TENDENCIES OF AUTOMOTIVE WHEEL BEARING GREASES.) |
| NF T60-191-1993 | 石油产品和润滑脂.润滑脂存储时的脱油现象.压力下的静态条件 | (Petroleum products and lubricating greases. Oil separation on storage of grease. Static conditions under pressure.) |
| NF T60-198-1994 | 润滑油.基本生物降解性的评定.红外光谱法 | (LUBRICANTS. EVALUATION OF PRIMARY BIODEGRADABILITY. METHOD BY INFRARED SPECTROSCOPY.) |
| NF T60-199-1994 | 润滑脂.润滑脂耐磨擦腐蚀压痕的能力 | (LUBRICATING GREASES. ABILITY OF LUBRICATING GREASES TO RESIST TO FALSE BRINELLING.) |
| NF T60-215-1961 | 动物脂肪和植物脂肪.润滑工业油酸氧化试验(MACKEY试验) | (ANIMAL AND VEGETABLE FATS. OXIDIZABILITY TEST OF TECHNICAL OLEIC ACIDS FOR OILING (MACKEY TEST).) |
| NF T60-309-1976 | 润滑剂、工业油和类似产品(L类).分类.O部分: 综合 | (SOAPS. DETERMINATION OF UNSAPONIFIABLE AND UNSAPONIFIED MATTER.) |
| NF T60-500-1987 | 石油产品和润滑剂.分类方法.分类说明 | (Petroleum products and lubricants. Method of classification. Definition of classes.) |
| NF T60-501-1987 | 润滑剂、工业润滑油及其产品(L类).分类.第3A部分:D系列(压缩机用) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 3A : FAMILY D (COMPRESSORS).) |
| NF T60-502-1988 | 润滑剂、工业润滑油及其产品(L类).分类,第3B部分:D系列(气体和制冷压缩机用) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 3B : FAMILY D (GAS AND REFRIGERATION COMPRESSORS).) |
| NF T60-503-1988 | 润滑剂、工业润滑油及相关产品(L级).分类.第5部分:T族(涡轮用) | (Lubricants, industrial oils and related products (class L). Classification. Part 5 : family T (turbines).) |
| NF T60-504-1987 | 润滑剂、工业润滑油及其产品(L类).分类.第7部分:M系列(金属加工用) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 7 : FAMILLY M (METALWORKING).) |
| NF T60-505-1987 | 润滑剂、工业用油及相关产品(L类).分类.第8部分:R系列(暂时性防腐) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 8 : FAMILY R (TEMPORARY PROTECTION AGAINST CORROSION).) |
| NF T60-506-1988 | 润滑剂、工业用油及相关产品(L类).分类.第9部分:X系列(润滑脂) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 9 : FAMILY X (GREASES).) |
| NF T60-507-1991 | 润滑剂、工业用油及相关产品(L类).分类.第6部分:C系列(齿轮传动) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 6 : FAMILY C (GEARS).) |
| NF T60-508-1989 | 润滑剂、工业润滑油和类似产品(L级).分类.第10部分:Y类(杂顶) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 10 : FAMILY Y (MISCELLANEOUS).) |
| NF T60-509-1990 | 润滑剂、工业润滑油和类似产品(L级).分类.第11部分:P类(风动工具) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 11 : FAMILY P (PNEUMATIC TOOLS).) |
| NF T60-510-1990 | 润滑剂、工业油类和有关产品(L级).分类.第12部分:Q类(导热液体) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 12 : FAMILY Q (HEAT TRANSFERT FLUIDS).) |
| NF T60-511-1989 | 润滑剂、工业润滑油和类似产品(L级).第13部分:G类(滑轨) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 13 : FAMILY G (SLIDEWAYS).) |
| NF T60-512-1989 | 润滑油、工业用油和类似产品.(L级).分类.第14部分.U类(热处理) | (LUBRICANTS,INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L). CLASSIFICATION. PART 14 : FAMILY U (HEAT TREATMENT).) |
| NF T60-513-2003 | 润滑剂、工业润滑油和相关产品(L类).分类.第4部分:H组(液压系统) | (Lubricants, industrial oils and related products (class L) - Classification - Part 4 : family H (hydraulic systems).) |
| NF T60-514-2000 | 润滑剂、工业用油和有关产品(L类).分类.第15部分:E系列(内燃机油) | (Lubricants, industrial oils and related products (class L) - Classification - Part 15 : family E (Internal combustion engine oils).) |
| NF T60-521-1989 | 石油产品和润滑剂.涡轮用石油润滑油(ISO-L-TSA和ISO-L-TGA).规范 | (PETROLEUM PRODUCTS AND LUBRICANTS. PETROLEUM LUBRICATING OILS FOR TURBINES (CATEGORIES ISO-L-TSA AND ISO-L-TGA). SPECIFICATIONS.) |
| NF T60-524-2000 | 润滑油、工业润滑油和相关产品(L级).E族(内燃机润滑油).两冲程周期汽油机用油规范(EGB、EGC、EGD类) | (Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD).) |
| NF T60-525-1998 | 润滑油、工业用油和相关产品(L级).H族(液压系统).目录HH、HL、HN、HR、HV和HG规范 | (Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HR, HV and HG.) |
| NF T60-526-2002 | 润滑油、工业油及有关产品(L级).H系列(液压系统).HFAE、HFAS、HFB、HFC、HFDR和HFDU类别规范 | (Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU.) |
| NF T60-602-1995 | 工业齿轮用耐特高压润滑剂.人工老化氧化稳定性的评定 | (EXTREME PRESSURE LUBRICANTS FOR INDUSTRIAL GEARS. EVALUATION OF OXIDATION STABILITY BY ARTIFICIAL AGEING.) |
| NF T60-605-1994 | 石油产品和润滑剂.未用的润滑油基上的多环芳香剂的测定.二甲亚矾萃取反应指数法 | (PETROLEUM PRODUCTS AND LUBRICANTS. DETERMINATION OF POLYCYCLIC AROMATICS IN UNUSED LUBRICATING BASE OILS. DIMETHYL SULPHOXIDE EXTRACTION REFRACTIVE INDEX METHOD.) |
| NF T60-607-1998 | 石油产品和润滑油.净馏分油DMSO抽提物紫外吸收指数的测定 | (PETROLEUM PRODUCTS AND LUBRICANTS. DETERMINATION OF THE UV ABSORBANCE INDEX OF DMSO EXTRACT OF NEAT CUTTING OILS.) |
| NF T60-608-2002 | 石油产品和润滑剂.高负荷下润滑脂的攻丝滚柱轴承润滑性能 | (Petroleum products and lubricants - Tappered roller bearing lubricating ability of a grease under high load.) |
| NF T60-609-1998 | 石油产品和润滑剂.酸值的测定.无水分电势滴定法 | (PETROLEUM PRODUCTS AND LUBRICANTS. DETERMINATION OF ACID NUMBER. NON-AQUEOUS POTENTIOMETRIC TITRATION METHOD. (EUROPEAN STANDARD EN 12634).) |
| NF T60-612-2-1999 | 石油产品.润滑油可过滤性测定.第2部分:干油程序 | (Petroleum products - Determination of the filterability of lubricating oils - Part 2 : procedure for dry oils.) |
| NF T60-613-2003 | 石油产品和润滑油.金属作业用水流质体.评估生物耐性 | (Petroleum products and lubricants - Aqueous fluids for metal working - Evaluation of the biological resistance.) |
| NF T77-104-1986 | 工业基硅.胶剂,润滑脂和非流体凝胶.锥入度的测定.稠度法 | (BASIC SILICONES FOR INDUSTRIAL USE. PASTES,GREASES AND NON FLUID GELS. DETERMINATION OF CONE PENETRATION. CONSISTOMETRY.) |
| 编号 | 中文名称 | 英文名称 |