| 编号 | 中文名称 | 英文名称 |
|---|
| BS 4A 4-1.2-1967
| 金属材料试样和试验方法规范.第1部分:拉伸试验.第2节:高温拉伸试验.米制单位
| Specification for test pieces and test methods for metallic materials - Tensile tests - Tensile tests - elevated temperature - Metric units
|
| BS 4A 4-1.3-1967
| 金属材料试样和试验方法规范.第1部分:拉伸试验.第3节:不间断蠕变试验和蠕变断裂试验.米制单位
| Specification for test pieces and test methods for metallic materials - Tensile tests - Uninterrupted creep and rupture tests - Metric units
|
| BS 4A 4-1966
| 飞机金属材料试样和试验方法.米制单位
| Test pieces and test methods for metallic materials for aircraft - Metric units
|
| BS 5600-3.6-1988
| 粉末冶金材料和制品.第3部分:烧结金属材料和制品（不包活硬质合金）试验方法.第6节:液体渗透率测定
| Powder metallurgical materials and products - Methods of testing sintered metal materials and products, excluding hardmetals - Determination of fluid permeability
|
| BS 5714-1979
| 金属材料电阻率的测量方法
| Method of measurement of resistivity of metallic materials
|
| BS 6404-8.6-1988
| 磁性材料.第8部分:专用材料.第6节:软磁性金属材料
| Magnetic materials - Individual materials - Specification for soft magnetic metallic materials
|
| BS 6722-1986
| 金属材料尺寸推荐规范
| Recommendations for dimensions of metallic materials
|
| BS 7252-1-1997
| 外科植入物用金属材料.可锻不锈钢规范
| Metallic materials for surgical implants - Specification for wrought stainless steel
|
| BS 7252-10-1997
| 外科植物入用金属材料.第10部分:煅制钛5-铝2.5-铁合金规范
| Metallic materials for surgical implants - Specification for wrought titanium 5-aluminium 2,5-iron alloy
|
| BS 7252-11-1995
| 外科植入物用金属材料.第11部分:可锻钛6-铝7-铌合金规范
| Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 7-niobium alloy
|
| BS 7252-12-1997
| 外科植物入用金属材料.第12部分:煅制钴-铬-钼合金规范
| Metallic materials for surgical implants - Specification for wrought cobalt-chromium-molybdenum alloy
|
| BS 7252-13-1997
| 外科植入物用金属材料.外科植入用非合金钽规范
| Metallic materials for surgical implants - Specification for unalloyed tantalum for surgical implant applications
|
| BS 7252-3-1997
| 外科植入物用金属材料.锻制钛6-铝4-钒合金规范
| Metallic materials for surgical implants - Specification for wrought titanium 6-aluminium 4-vanadium alloy
|
| BS 7252-4-1997
| 外科植入物用金属材料.第4部分:钴-铬-钼铸造合金规范
| Metallic materials for surgical implants - Specification for cobalt-chromium-molybdenum casting alloy
|
| BS 7252-5-1994
| 外科植入物用金属材料.第5部分:可锻钴-铬-钨-镍合金规范
| Metallic materials for surgical implants - Specification for wrought cobalt-chromium-tungsten-nickel alloy
|
| BS 7252-6-1997
| 外科植入物用金属材料.可锻钴-镍-铬-钼合金规范
| Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum alloy
|
| BS 7252-7-1994
| 外科植入物用金属材料.第7部分:钴-铬-镍-钼-铁合金规范
| Metallic materials for surgical implants - Specification for cobalt-chromium-nickel-molybdenum-iron alloy
|
| BS 7252-8-1997
| 外科植入物用金属材料.可锻钴-镍-铬-钼-钨-铁合金规范
| Metallic materials for surgical implants - Specification for wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
|
| BS 7252-9-1993
| 外科植物入用金属材料.第9部分:高氮不锈钢规范
| Metallic materials for surgical implants - Specification for high-nitrogen stainless steel
|
| BS 7253-2-1997
| 外科植入物用非金属材料.高纯度氧化铝陶瓷材料规范
| Non-metallic materials for surgical implants - Specification for ceramic materials based on high purity alumina
|
| BS 7253-3-1990
| 外科植入物用非金属材料.第3部分:热硫化硅弹性体制外科植入物规范
| Non-metallic materials for surgical implants - Specification for surgical implants made of heat-vulcanized silicone elastomer
|
| BS 7253-6-1997
| 外科植入非金属材料.基于氧化钇稳定处理的四方形氧化锆陶瓷材料规范
| Non-metallic materials for surgical implants - Specification for ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)
|
| BS 7270-2006
| 金属材料.控制轴向疲劳的恒定振幅应力.试验方法
| Metallic materials - Constant amplitude strain controlled axial fatigue - Method of test
|
| BS 7448-1-1991
| 断裂结构韧性试验.金属材料的KIc临界CTOD和临界J值的测定方法
| Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of metallic materials
|
| BS 7448-2-1997
| 断裂机械韧性试验.第2部分:金属材料焊接的KDOWNIDOWNc值、临界CTOD值和临界J值的测定方法
| Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
|
| BS 7448-3-2005
| 断裂机械韧性试验.应力强度因子大于3.0 MPa m0.5 s-1的增长速度下金属材料断裂韧性的测定方法
| Fracture mechanics toughness tests - Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
|
| BS 7448-4-1997
| 断裂机械韧性试验.金属材料稳定裂纹延伸的抗断裂曲线和初始值的测定方法
| Fracture mechanics toughness tests - Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
|
| BS 7766-1994
| 金属材料潜在影响人类用水质量的评定规范
| Specification for assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption
|
| BS A 303-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层短长度或中长度MJ螺纹的由金属材料制成的标称12角螺栓头标称杆
| Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 304-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层长长度MJ螺纹的由金属材料制成的标称12角螺栓头标称或节径杆螺
| Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 306-1994
| 经过表面处理或没经过表面处理由金属材料制成的万能头实心铆钉.尺寸
| Rivets, solid, universal head, metallic material, with or without surface treatment - Dimensions
|
| BS A 307-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层长长度MJ螺纹由金属材料制成的标称花键头、标称或节径杆螺栓.
| Bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 308-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层短长度或中长度MJ螺纹的由金属材料制成的标称花键头标称杆螺栓
| Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 309-1994
| 强度等级小于或等于1100 MPa的有涂层或无涂层长长度MJ螺纹的由金属材料制成的大六角头标称或节径杆螺栓.尺
| Bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 310-1995
| 强度等级小于或等于1250MPa-1800MPa的有涂层或无涂层短长度或中长度MJ螺纹的由金属材料制成的标称大12角螺
| Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions
|
| BS A 311-1997
| 航空航天.强度级小于或等于1100 MPa的涂层或未涂层金属材料标称杆短长度或中等长度MJ螺纹的内部偏移十字形
| Aerospace - Screws, 100 ° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 312-1997
| 强度级小于或等于1100MPa的涂层或未涂层金属材料制阶梯形杆、短长度或中等长度MJ螺纹的内偏移十字形肋状或
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 313-1997
| 航空航天.强度级小于或等于1100MPa的涂层或未涂层金属材料制节径杆长长度MJ螺纹的内偏移十字形肋状或非肋状
| Areospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 322-1998
| 内分支凸型或非凸型驱动的金属材料涂层或未土层的强度级低于或等于1100Mpa的平头带螺纹螺钉.尺寸
| Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
|
| BS A 326-1998
| 有表面处理或无表面处理金属材料的带圆顶100°标称埋头实心铆钉.尺寸
| Rivets, solid, 100 ° normal countersunk head with dome, metallic material, with or without surface treatment - Dimensions
|
| BS A 331-1998
| 强度级小于或等于1275MPa的涂层或未涂层金属材料制标称或节径杆长长度MJ螺纹扎制双六角头螺拴.尺寸
| Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions
|
| BS A 353-2000
| 涂覆或未涂覆的金属材料制的MJ螺纹游动自锁螺母的衬套.尺寸
| Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions
|
| BS A 354-2000
| 涂覆或未涂覆的金属材料制的封闭式MJ螺纹的自锁衬套.尺寸
| Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions
|
| BS A 355-2000
| 涂覆或未涂覆的金属材料制的开放式MJ螺纹自锁衬套.尺寸
| Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated - Dimensions
|
| BS A 356-2000
| 覆层的或未覆层的金属材料制的封闭式小尺寸法兰缘MJ螺纹自锁衬套.尺寸
| Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions
|
| BS A 357-2000
| 金属材料制的涂覆或未涂覆的带间隙孔的衬套.尺寸
| Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions
|
| BS A 361-2000
| 经过表面处理或未经过表面处理的金属材料制100度标称埋头实心铆钉.尺寸
| Rivets, solid, 100 ° normal countersunk head, in metallic material, with or without surface treatment - Dimensions
|
| BS CWA 15261-1-2005
| 测量金属材料机械试验的不确定性.低循环疲劳试验的不确定性评价
| Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in low-cycle fatigue testing
|
| BS CWA 15261-2-2005
| 测量金属材料机械试验的不确定性.抗拉试验的不确定性评价
| Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in tensile testing
|
| BS CWA 15261-3-2005
| 测量金属材料机械试验的不确定性.蠕变试验的不确定性评价
| Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in creep testing
|
| BS CWA 15627-2006
| 金属材料用小型冲压试验方法
| Small punch test method for metallic materials
|
| BS DD 256-2002
| 生活用水质量不良影响的金属材料用潜力评估.规范
| Assessment of the potential for metallic materials to affect adversely the quality of water intended for human consumption - Specification
|
| BS EN 10002-1-2001
| 金属材料拉伸试验.常温试验方法
| Tensile testing of metallic materials - Method of test at ambient temperature
|
| BS EN 10002-5-1992
| 金属材料拉伸试验.第5部分:高温试验方法
| Tensile testing of metallic materials - Method of test at elevated temperatures
|
| BS EN 10036-1991
| 黑色金属材料的化学分析.钢铁中碳总含量的测定.在氧气流中燃烧后的重力测定法
| Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen
|
| BS EN 10045-1-1990
| 金属材料的夏（比）氏冲击试验.V形和U形切口试验方法
| Charpy impact test on metallic materials - Test method (V- and U-notches)
|
| BS EN 10045-2-1993
| 金属材料的夏（比）氏冲击试验.第2部分:冲击试验机的检验方法
| Charpy impact test on metallic materials - Method for the verification of impact testing machines
|
| BS EN 10071-1991
| 黑色金属材料的化学分析.钢铁中锰含量的测定.电势滴定法
| Chemical analysis of ferrous materials - Determination of manganese in steels and irons - Electrometric titration method
|
| BS EN 1011-1-1998
| 焊接.金属材料焊接的推荐规范.电弧焊的通用指南
| Welding - Recommendations for welding of metallic materials - General guidance for arc welding
|
| BS EN 1011-2-2001
| 焊接.金属材料焊接的推荐规范.铁素体钢的电弧焊接
| Welding - Recommendations for welding of metallic materials - Arc welding of ferritic steels
|
| BS EN 1011-3-2000
| 焊接.金属材料焊接的推荐规范.不锈钢的电弧焊接
| Welding - Recommendations for welding of metallic materials - Arc welding of stainless steels
|
| BS EN 1011-4-2000
| 焊接.金属材料焊接的推荐规范.铝及铝合金的电弧焊接
| Welding - Recommendations for welding of metallic materials - Arc welding of aluminium and aluminium alloys
|
| BS EN 1011-5-2003
| 焊接.金属材料焊接的推荐规程.覆层钢的焊接
| Welding - Recommendations for welding of metallic materials - Welding of clad steel
|
| BS EN 1011-6-2005
| 焊接.金属材料焊接的建议.第6部分:激光束焊接
| Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
|
| BS EN 1011-7-2004
| 焊接.金属材料焊接的推荐规范.电子束焊
| Welding - Recommendations for welding of metallic materials - Electron beam welding
|
| BS EN 1011-8-2004
| 焊接.金属材料焊接的推荐规范.铸铁的焊接
| Welding - Recommendations for welding of metallic materials - Welding of cast irons
|
| BS EN 10136-1991
| 黑色金属材料的化学分析.钢铁中镍含量的测定.火焰原子吸收光谱测定法
| Chemical analysis of ferrous materials - Determination of nickel in steels and irons - Flame atomic absorption spectrometric method
|
| BS EN 10184-2006
| 黑色金属材料化学分析.非合金钢铁中磷的测定.钼蓝光度法测定酸溶硅量
| Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method
|
| BS EN 10200-1992
| 黑色金属材料化学分析方法.用分光光度法测定钢中的硼含量
| Chemical analysis of ferrous materials - Determination of boron in steel - Spectrophotometric method
|
| BS EN 10204-2004
| 金属材料.检验文件的类型
| Metallic materials - Types of inspection documents
|
| BS EN 10274-1999
| 金属材料.失落重力撕裂试验
| Metallic materials - Drop weight tear test
|
| BS EN 10275-1999
| 金属材料.管形环液压试验
| Metallic materials - Tube ring hydraulic pressure test
|
| BS EN 10291-2000
| 金属材料.拉伸同轴蠕变试验.试验方法
| Metallic materials - Uniaxial creep testing in tension - Methods of test
|
| BS EN 10319-1-2003
| 金属材料.拉伸应力松弛试验.试验机规程
| Metallic materials - Tensile stress relaxation testing - Procedure for testing machines
|
| BS EN 10319-2-2006
| 金属材料.拉伸应力松弛测试.螺栓连接模型用程序
| Metallic materials - Tensile stress relaxation testing - Procedure for bolted joint models
|
| BS EN 1043-1-1996
| 金属材料焊接的破坏试验.硬度试验.第1部分:电弧焊接的硬度试验
| Destructive tests on welds in metallic materials - Hardness testing - Hardness test on arc welded joints
|
| BS EN 1043-2-1997
| 金属材料焊接点的破坏试验.第2部分:焊接连接件的显微硬度试验
| Destructive tests on welds in metallic materials - Hardness testing - Micro hardness testing on welded joints
|
| BS EN 12062-1998
| 焊缝的无损检验.对金属材料的一般规则
| Non-destructive examination of welds - General rules for metallic materials
|
| BS EN 12500-2000
| 金属材料防腐.大气环境下的腐蚀概率.大气环境腐蚀性的分类、测定和评估
| Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments
|
| BS EN 12501-1-2003
| 金属材料的防腐蚀.土壤中腐蚀可能性.总则
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - General
|
| BS EN 12501-2-2003
| 金属材料的防腐蚀.土壤中腐蚀可能性.低合金和非合金黑色金属材料
| Protection of metallic materials against corrosion - Corrosion likelihood in soil - Low alloyed and non alloyed ferrous materials
|
| BS EN 12502-1-2005
| 金属材料腐蚀防护.配水和蓄水系统中腐蚀可能性的评价指南.总则
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - General
|
| BS EN 12502-2-2005
| 金属材料腐蚀防护.配水和蓄水系统中腐蚀可能性的评价指南.铜和铜合金的影响因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for copper and copper alloys
|
| BS EN 12502-3-2005
| 金属材料腐蚀防护.配水和蓄水系统中腐蚀可能性的评价指南.热浸镀锌铁类材料的影响因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for hot dip galvanised ferrous materials
|
| BS EN 12502-4-2005
| 金属材料腐蚀防护.配水和蓄水系统中腐蚀可能性的评价指南.不锈钢的影响因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for stainless steels
|
| BS EN 12502-5-2005
| 金属材料腐蚀防护.配水和蓄水系统中腐蚀可能性的评价指南.铸铁、非合金和低合金钢的影响因素
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Influencing factors for cast iron, unalloyed and low alloyed steels
|
| BS EN 13068-3-2001
| 无损检验.射线检验.χ和γ射线对金属材料进行射线检验的一般原理
| Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays
|
| BS EN 1320-1997
| 金属材料焊接点的破坏试验.断裂试验
| Destructive tests on welds in metallic materials - Fracture tests
|
| BS EN 1321-1997
| 金属材料焊接点的破坏试验.焊接点的宏观和微观检验
| Destructive test on welds in metallic materials - Macroscopic and microscopic examination of welds
|
| BS EN 13397-2002
| 工业阀.金属材料制隔膜阀
| Industrial valves - Diaphragm valves made of metallic materials
|
| BS EN 13479-2005
| 焊接消耗品.金属材料熔焊用填充金属和焊剂的一般产品标准
| Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
|
| BS EN 1418-1998
| 焊接操作人员.金属材料全机械化焊接和自动焊接用的熔焊和电阻焊定位器的焊接操作人员的批准试验
| Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
|
| BS EN 14784-2-2005
| 无损检验.用存储荧光成像板的工业计算辐射摄影术.用X射线和γ射线检验金属材料的一般原则
| Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - General principles for testing of metallic materials using X-rays and gamma rays
|
| BS EN 14868-2005
| 金属材料防腐蚀保护.封闭水循环系统中腐蚀可能性的评定指南
| Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
|
| BS EN 2002-1-2005
| 航天航空系列.金属材料.试验方法.室温下抗拉试验
| Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature
|
| BS EN 2002-2-2005
| 航天航空系列.金属材料.试验方法.高温下抗拉试验
| Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature
|
| BS EN 2032-1-2002
| 金属材料.常用命名
| Metallic materials - Conventional designation
|
| BS EN 2032-2-1994
| 金属材料.交付技术状态下冶金状态标记编码
| Metallic materials - Coding of metallurgical condition in delivery condition
|
| BS EN 2078-2002
| 航空航天系列.金属材料.制造进度表、检验进度表、检验和试验报告.定义、一般原则、准备和批准
| Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval
|
| BS EN 2243-1-2005
| 航空航天系列.非金属材料.结构胶粘剂.试验方法.单面搭接剪切
| Non-metallic materials - Structural adhesives - Test method - Part 1: Single lap shear
|
| BS EN 2243-2-2005
| 航空航天系列.非金属材料.结构胶粘剂.试验方法.金属间剥离试验
| Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
|
| BS EN 2243-3-2005
| 航空航天系列.非金属材料.结构胶粘剂.试验方法.金属蜂窝状夹心材料的剥离试验
| Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core
|
| BS EN 2243-4-2005
| 航天航空系列.非金属材料.结构胶粘剂.试验方法.金属蜂窝状芯材的平面拉伸试验
| Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 4: Metal-honeycomb core flatwise tensile test
|
| BS EN 2243-5-2005
| 航空航天系列.非金属材料.结构胶粘剂.试验方法.老化试验
| Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
|
| BS EN 2243-6-2005
| 航空航天系列.非金属材料.结构胶粘剂.试验方法.剪切应力和剪切应变量测定
| Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
|
| BS EN 2310-1991
| 非金属材料阻燃率的试验方法
| Test methods for the flame resistance rating of non-metallic materials
|
| BS EN 23312-1993
| 绕结金属材料和硬质合金.杨氏模量的测定
| Sintered metal materials and hardmetals - Determination of Young modulus
|
| BS EN 23369-1993
| 密封烧结金属材料和硬质合金.密度的测定
| Impermeable sintered metal materials and hardmetals - Determination of density
|
| BS EN 24003-1993
| 不密封烧结金属材料.气泡试验孔隙尺寸的测定
| Permeable sintered metal materials - Determination of bubble test pore size
|
| BS EN 25754-1993
| 烧结金属材料(不包括硬质金属).无缺口冲击试样
| Sintered metal materials, excluding hardmetals - Unnotched impact test piece
|
| BS EN 2667-6-2002
| 航空航天系列.非金属材料.泡沫结构粘合剂.试验方法.吸水性的测定
| Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Determination of water absorption
|
| BS EN 2744-1992
| 非金属材料.优选的试验温度
| Non-metallic materials - Preferred test temperatures
|
| BS EN 2781-1998
| 非金属材料.结构胶粘剂.试验方法.初始厚度的测定
| Non-metallic materials - Structural adhesives - Test methods - Determination of the primer thickness
|
| BS EN 288-9-1999
| 金属材料焊接程序的规范和批准.传输管道的陆地和海岸现场对焊管道的焊接程序试验
| Specification and approval of welding procedures for metallic materials - Welding procedure test for pipeline welding on land and offshore site butt welding of transmission pipelines
|
| BS EN 4000-2002
| 航空航天系列.金属材料.金属半成品的尺寸标准起草和说明规则
| Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products
|
| BS EN 4258-1998
| 金属材料.标准化的一般组织.欧洲标准的类型与其使用之间的链接
| Metallic materials - General organization of standardization - Links between types of EN standards and their use
|
| BS EN 444-1994
| 无损检验.用X和γ射线对金属材料进行射线检查的一般原则
| Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
|
| BS EN 764-4-2002
| 压力设备.金属材料的交货技术条件的编制
| Pressure equipment - Establishment of technical delivery conditions for metallic materials
|
| BS EN 875-1995
| 金属材料焊接的破坏试验.冲击试验.试样定位、槽口取向和检验
| Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
|
| BS EN 876-1995
| 金属材料焊接的破坏试验.熔焊接点中焊接金属的纵向拉伸试验
| Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
|
| BS EN 895-1995
| 金属材料焊接的破坏试验.横向抗拉试验
| Destructive tests on welds in metallic materials - Transverse tensile test
|
| BS EN 910-1996
| 金属材料焊接点的破坏试验.弯曲试验
| Destructive tests on welds in metallic materials - Bend tests
|
| BS EN ISO 10271-2001
| 牙科金属材料.腐蚀试验方法
| Dental metallic materials - Corrosion test methods
|
| BS EN ISO 11114-1-1998
| 可运输气瓶.装气气瓶和阀门材料的兼容性.金属材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Metallic materials
|
| BS EN ISO 11114-2-2001
| 可运输气瓶.气瓶和含气阀门材料的可兼容性.非金属材料
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Non-metallic materials
|
| BS EN ISO 11114-4-2007
| 运输储气瓶.储气瓶和阀门材料与盛装气体的兼容性.选择耐氢脆金属材料的试验方法
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Test methods for selecting metallic materials resistant to hydrogen embrittlement
|
| BS EN ISO 12737-2005
| 金属材料.平面变形断裂韧性的测定
| Metallic materials - Determination of plane-strain fracture toughness
|
| BS EN ISO 14554-1-2001
| 焊接的质量要求.金属材料的电阻焊接.全面质量要求
| Quality requirements for welding - Resistance welding of metallic materials - Comprehensive quality requirements
|
| BS EN ISO 14554-2-2001
| 焊接的质量要求.金属材料的电阻焊接.基本质量要求
| Quality requirements for welding - Resistance welding of metallic materials - Elementary quality requirements
|
| BS EN ISO 14555-2006
| 焊接.金属材料的电弧螺栓焊
| Welding - Arc stud welding of metallic materials
|
| BS EN ISO 14577-4-2007
| 金属材料.测量硬度和材料参数用仪器压痕试验.金属和非金属覆层试验方法
| Metallic materials - Instrumented indentation test for hardness and materials parameters - Test method for metallic and non-metallic coatings
|
| BS EN ISO 15607-2003
| 金属材料焊接程序规范和合格鉴定.总则
| Specification and qualification of welding procedures for metallic materials - General rules
|
| BS EN ISO 15609-1-2004
| 金属材料的焊接程序规范和合格鉴定.焊接程序规范.电弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Arc welding
|
| BS EN ISO 15609-3-2004
| 金属材料焊接程序的规范和合格评定.焊接程序规范.电子束焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Electron beam welding
|
| BS EN ISO 15609-4-2004
| 金属材料焊接程序的规范和合格鉴定.焊接程序规范.激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Laser beam welding
|
| BS EN ISO 15609-5-2004
| 金属材料的焊接程序规范和合格鉴定.焊接程序规范.电阻焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Resistance welding
|
| BS EN ISO 15610-2003
| 金属材料焊接程序的规范和认可.基于试验消耗品的认可
| Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables
|
| BS EN ISO 15611-2003
| 金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定
| Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience
|
| BS EN ISO 15612-2004
| 金属材料焊接程序的规范和合格鉴定.标准焊接程序采用的合格鉴定
| Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure
|
| BS EN ISO 15613-2004
| 金属材料的焊接程序的鉴定和规范.基于预生产焊接试验的合格鉴定
| Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
|
| BS EN ISO 15614-1-2004
| 金属材料焊接程序的规范和鉴定.焊接程序试验.钢的弧焊和气焊以及镍和镍合金的弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of steels and arc welding of nickel and nickel alloys
|
| BS EN ISO 15614-10-2005
| 金属材料焊接程序的规范和鉴定.焊接程序试验.高压干焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Hyperbaric dry welding
|
| BS EN ISO 15614-11-2002
| 金属材料焊接程序的规范和合格鉴定.焊接程序试验.电子和激光束焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Electron and laser beam welding
|
| BS EN ISO 15614-12-2004
| 金属材料焊接程序的规范和合格鉴定.焊接程序试验.点焊、缝焊和凸焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Spot, seam and projection welding
|
| BS EN ISO 15614-13-2005
| 金属材料焊接程序的规范和鉴定.焊接程序试验.电阻对接焊和电弧对接焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Resistance butt and flash welding
|
| BS EN ISO 15614-2-2005
| 金属材料焊接过程的规范和鉴定.焊接过程试验.铝及其合金的电弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of aluminium and its alloys
|
| BS EN ISO 15614-4-2005
| 金属材料焊接过程的规范和鉴定.焊接过程试验.铝铸件的精焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Finishing welding of aluminium castings
|
| BS EN ISO 15614-5-2004
| 金属材料焊接程序的规范和鉴定.焊接程序试验.钛、锆及其合金电弧焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc welding of titanium, zirconium and their alloys
|
| BS EN ISO 15614-6-2006
| 金属材料焊接程序的规范和合格鉴定.焊接程序试验.铜及其合金的弧焊和气焊
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Arc and gas welding of copper and its alloys
|
| BS EN ISO 15614-7-2007
| 金属材料焊接程序规范和鉴定.焊接程序试验.覆盖焊接
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Overlay welding
|
| BS EN ISO 15614-8-2002
| 金属材料焊接程序的规范和合格鉴定.焊接程序试验.管对管焊接. 平板接合
| Specification and qualification of welding procedures for metallic materials - Welding procedure test - Welding of tubes to tube-plate joints
|
| BS EN ISO 15620-2000
| 焊接.金属材料摩擦焊接
| Welding - Friction welding of metallic materials
|
| BS EN ISO 17641-1-2004
| 金属材料焊接的有损试验.焊件的热裂试验.弧焊过程.概要
| Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - General
|
| BS EN ISO 17641-2-2005
| 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.自束试验
| Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Self-restraint tests
|
| BS EN ISO 17642-1-2004
| 金属材料中焊接的有损检验.焊接的冷裂试验.弧焊工艺.总则
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - General
|
| BS EN ISO 17642-2-2005
| 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.自束试验
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Self-restraint tests
|
| BS EN ISO 17642-3-2005
| 金属材料焊接的有损检验.焊接的冷裂试验.弧焊工艺.外部载荷试验
| Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Externally loaded tests
|
| BS EN ISO 17653-2003
| 金属材料焊缝的有损试验.电阻点焊焊缝的扭转试验
| Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
|
| BS EN ISO 17654-2003
| 金属材料焊缝的有损试验.电阻焊接.电阻缝焊的压力试验
| Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds
|
| BS EN ISO 17655-2003
| 金属材料焊缝的有损试验.测量δ铁素体用的取样方法
| Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
|
| BS EN ISO 18265-2003
| 金属材料.硬度值的换算
| Metallic materials - Conversion of hardness values
|
| BS EN ISO 18278-1-2004
| 电阻焊.可焊性.金属材料的电阻点焊、缝焊和凸焊的可焊性评定
| Resistance welding - Weldability - Assessment of weldability for resistance spot, seam and projection welding of metallic materials
|
| BS EN ISO 20482-2003
| 金属材料.薄板材和带材.埃里克森压凹试验
| Metallic materials - Sheet and strip - Erichsen cupping test
|
| BS EN ISO 22674-2007
| 牙科学.固定式和移动式修复体和牙科器具用金属材料
| Dentistry - Metallic materials for fixed and removable restorations and appliances
|
| BS EN ISO 2738-2000
| 烧结金属材料(硬金属除外).渗透性烧结金属材料.密度、油含量和开口孔隙度的测定
| Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
|
| BS EN ISO 2740-2007
| 硬质金属除外的烧结金属材料.抗拉试验工件
| Sintered metal materials, excluding hardmetals - Tensile test pieces
|
| BS EN ISO 3325-1999
| 不包括硬质合金的烧结金属材料.横向断裂强度的测定
| Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
|
| BS EN ISO 376-2004
| 金属材料.验证单轴向试验机用测力仪的校准
| Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
|
| BS EN ISO 3785-2006
| 金属材料.关于产品质地的试验样品轴的命名
| Metallic materials - Designation of test specimen axes in relation to product texture
|
| BS EN ISO 3834-1-2006
| 金属材料熔焊的质量要求.质量要求的适当级别的选择标准
| Quality requirements for fusion welding of metallic materials - Criteria for the selection of the appropriate level of quality requirements
|
| BS EN ISO 3834-2-2006
| 金属材料熔焊的质量要求.综合质量要求
| Quality requirements for fusion welding of metallic materials - Comprehensive quality requirements
|
| BS EN ISO 3834-3-2006
| 金属材料熔焊的质量要求.标准质量要求
| Quality requirements for fusion welding of metallic materials - Standard quality requirements
|
| BS EN ISO 3834-4-2006
| 金属材料熔焊的质量要求.基本质量要求
| Quality requirements for fusion welding of metallic materials - Elementary quality requirements
|
| BS EN ISO 3834-5-2006
| 金属材料熔焊的质量要求.有必要声明和ISO 3834-2、ISO 3834-3或ISO 3834-4质量要求一致的文件
| Quality requirements for fusion welding of metallic materials - Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
|
| BS EN ISO 3892-2001
| 金属材料的转化覆层.单位面积覆层质量的测定.重量分析法
| Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
|
| BS EN ISO 3928-1999
| 烧结金属材料.不包括硬质金属.疲劳试验件
| Sintered metal materials, excluding hardmetals - Fatigue test pieces
|
| BS EN ISO 4022-1988
| 可渗性烧结金属材料.液体渗透性的测定
| Permeable sintered metal materials - Determination of fluid permeability
|
| BS EN ISO 4545-1-2006
| 金属材料.努氏硬度试验.试验方法
| Metallic materials - Knoop hardness test - Test method
|
| BS EN ISO 4545-2-2006
| 金属材料.努氏硬度试验.试验机械的检验和校准
| Metallic materials - Knoop hardness test - Verification and calibration of testing machines
|
| BS EN ISO 4545-3-2006
| 金属材料.努氏硬度试验.标准块校准
| Metallic materials - Knoop hardness test - Calibration of reference blocks
|
| BS EN ISO 4545-4-2006
| 金属材料.努氏硬度试验.硬度值表
| Metallic materials - Knoop hardness test - Tables of hardness values
|
| BS EN ISO 6506-1-2006
| 金属材料.布氏硬度试验.试验方法
| Metallic materials - Brinell hardness test - Test method
|
| BS EN ISO 6506-2-2006
| 金属材料.布氏硬度试验.布氏硬度试验机的验证和校准
| Metallic materials - Brinell hardness test - Verification and calibration of testing machines
|
| BS EN ISO 6506-3-2006
| 金属材料.布氏硬度试验.基准块校准
| Metallic materials - Brinell hardness test - Calibration of reference blocks
|
| BS EN ISO 6506-4-2006
| 金属材料.布氏硬度试验.硬度值表
| Metallic materials - Brinell hardness test - Table of hardness values
|
| BS EN ISO 6507-1-2006
| 金属材料.维式硬度试验.试验方法
| Metallic materials - Vickers hardness test - Test method
|
| BS EN ISO 6507-2-2006
| 金属材料.维式硬度试验.试验机器的验证和校准
| Metallic materials - Vickers hardness test - Verification and calibration of testing machines
|
| BS EN ISO 6507-3-2006
| 金属材料.维式硬度试验.试验方法
| Metallic materials - Vickers hardness test - Calibration of reference blocks
|
| BS EN ISO 6507-4-2006
| 金属材料.维氏硬度试验.硬度数值表
| Metallic materials - Vickers hardness test - Tables of hardness values
|
| BS EN ISO 6508-1-2006
| 金属材料.布氏硬度试验.试验方法(标度A、B、C、D、E、F、G、H、K、N、T)
| Metallic materials - Rockwell hardness test - Test method (scales A, B, C, D, E, F, G, H, K, N, T)
|
| BS EN ISO 6508-2-2006
| 金属材料.布氏硬度试验.试验机的鉴定和校准(标度A、B、C、D、E、F、G、H、K、N、T)
| Metallic materials - Rockwell hardness test - Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N , T)
|
| BS EN ISO 6508-3-2006
| 金属材料.布氏硬度试验.基准块的校准(标度A、B、C、D、E、F、G、H、K、N、T)
| Metallic materials - Rockwell hardness test - Calibration and reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
|
| BS EN ISO 6520-1-2007
| 焊接和相关工艺.金属材料中几何缺陷的分类.熔焊
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Fusion welding
|
| BS EN ISO 6520-2-2002
| 焊接及相关工艺.金属材料中几何缺陷的分类.压力焊
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Welding with pressure
|
| BS EN ISO 7153-1-2001
| 外科器械.金属材料.不锈钢
| Surgical instruments - Metallic materials - Stainless steel
|
| BS EN ISO 7438-2005
| 金属材料.弯曲试验
| Metallic materials - Bend test
|
| BS EN ISO 7500-1-2004
| 金属材料.静态单轴向试验机的鉴定.拉伸和压缩试验机.测力系统的鉴定和校准
| Metallic materials - Verification of static uniaxial testing machines - Tension/compression testing machines - Verification and calibration of the force-measuring system
|
| BS EN ISO 7500-2-2007
| 金属材料.静态单轴向试验机鉴定.拉伸蠕变试验机.作用力验证
| Metallic materials - Verification of static uniaxial testing machines - Tension creep testing machines - Verification of the applied force
|
| BS EN ISO 7799-2000
| 金属材料.厚度≤3mm板材和带材.反向弯曲试验
| Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test
|
| BS EN ISO 8491-2004
| 金属材料.管材(全截面).弯曲试验
| Metallic materials - Tube (in full section) - Bend test
|
| BS EN ISO 8492-2004
| 金属材料.管材.压扁试验
| Metallic materials - Tube - Flattening test
|
| BS EN ISO 8493-2004
| 金属材料.管材.扩口试验
| Metallic materials - Tube - Drift-expanding test (ISO 8493:1998)
|
| BS EN ISO 8494-2004
| 金属材料.管材.卷边试验
| Metallic materials - Tube - Flanging test
|
| BS EN ISO 8495-2004
| 金属材料.管材.环形扩口试验
| Metallic materials - Tube - Ring-expanding test
|
| BS EN ISO 8496-2004
| 金属材料.管材.环形拉伸试验
| Metallic materials - Tube - Ring tensile test
|
| BS EN ISO 9018-2003
| 金属材料焊接的破坏试验.十字形接缝和搭接缝的抗拉试验
| Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
|
| BS EN ISO 9513-2002
| 金属材料.单轴向试验用引伸计的校准
| Metallic materials - Calibration of extensometers used in uniaxial testing
|
| BS ISO 10113-2006
| 金属材料.薄板材和带材.测定塑料应力
| Metallic materials - Sheet and strip - Determination of plastic strain ratio
|
| BS ISO 10275-2007
| 金属材料.薄板材和带材.抗拉应力硬化指数的测定
| Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
|
| BS ISO 12107-2003
| 金属材料.疲劳试验.数据的统计规划和分析
| Metallic materials - Fatigue testing - Statistical planning and analysis of data
|
| BS ISO 12108-2003
| 金属材料.疲劳试验.疲劳裂痕增长试验
| Metallic materials - Fatigue testing - Fatigue crack growth method
|
| BS ISO 14317-2007
| 非硬质金属的烧结金属材料.耐压屈服强度的测定
| Sintered metal materials excluding hardmetals - Determination of compressive yield strength
|
| BS ISO 19819-2004
| 金属材料.液态氦中的抗拉试验
| Metallic materials - Tensile testing in liquid helium
|
| BS ISO 22826-2006
| 金属材料焊缝的破坏性试验.激光和电子束焊测定窄接头硬度的试验(维氏和努氏硬度试验)
| Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
|
| BS ISO 23718-2007
| 金属材料.机械测试.词汇
| Metallic materials - Mechanical testing - Vocabulary
|
| BS ISO 3928-1999
| 不包括硬质合金的烧结金属材料.疲劳试件
| Sintered metal materials, excluding hardmetals - Fatigue test pieces
|
| BS ISO 4498-2005
| 不包括硬质合金的烧结金属材料.表观硬度和显微硬度的测定
| Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
|
| BS ISO 5832-2-1999
| 外科植入物.金属材料.纯钛
| Implants for surgery - Metallic materials - Unalloyed titanium
|
| BS ISO 7625-2007
| 不包括硬质金属的烧结金属材料.制备碳含量测定用化学分析样品
| Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
|
| BS ISO 7800-2003
| 金属材料.线材.单向扭转试验
| Metallic materials - Wire - Simple torsion test
|
| BS M 37-1970
| 金属材料和部件的腐蚀检验法
| Method for the etch inspection of metallic materials and components
|
| DD 186-1991
| 金属材料的阈限应力强度因子和疲劳裂纹增长率的测定方法
| Method for determination of threshold stress intensity factors and fatigue crack growth rates in metallic materials
|
| 编号 | 中文名称 | 英文名称 |
|---|