| 编号 | 中文名称 | 英文名称 |
|---|
| NF A03-001-2001
| 金属材料.拉伸试验.第1部分:常温试验方法
| (Metallic materials - Tensile testing - Part 1 : method of test at ambient temperature.)
|
| NF A03-002-1999
| 金属材料.静态单轴向试验机的验正.第1部分:拉伸/压缩试验机
| (Metallic materials - Verification of static uniaxial testing machines - Part 1 : tension/compression testing machines.)
|
| NF A03-003-2002
| 金属材料.用于验证单轴向试验机的作用力检验仪的校准
| (Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.)
|
| NF A03-004-2003
| 金属材料.单轴向试验用伸长计的校准
| (Metallic materials - calibration of extensometers used in uniaxial testing.)
|
| NF A03-011-1990
| 金属材料.摆锤式冲击试验.第1部分:试验方法
| (Metallic materials. Charpy impact test. Part 1 : test method.)
|
| NF A03-012-1992
| 金属材料.夏比冲击试验.第2部分:试验机的检定(冲击摆).(欧洲标准EN 10045-2)
| (Metallic materials. Charpy impact test. Part 2 : verification of the testing machine (pendulum impact).)
|
| NF A03-021-1994
| 金属材料.硬度试验.第1部分:洛氏表面硬度试验.(15N、30N、45N、15T、30T和45T刻度)
| (METALLIC MATERIALS. HARDNESS TEST. PART 1 : ROCKWELL TEST (SCALES A, B, C, D, E, F, G, H, K) AND ROCKWELL SUPERFICIAL TEST (SCALES 15N, 30N, 45N, 15T, 30T AND 45T). (EUROPEAN STANDARD EN 10109-1).)
|
| NF A03-031-1994
| 金属材料.布氏硬度试验.第1部分:试验方法(ISO 6506-81)
| (METALLIC MATERIALS. BRINELL HARDNESS TEST. PART 1 : TEST METHOD. (EUROPEAN STANDARD EN 10003-1).)
|
| NF A03-091-1994
| 金属材料.管材(全截面).弯曲试验
| (Metallic materials. Tube (in full section). Bend test.)
|
| NF A03-093-1994
| 金属材料.管.拉力试验
| (Metallic materials. Tube. Drift expanding test.)
|
| NF A03-096-1994
| 金属材料.管材.环形拉伸试验
| (METALLIC MATERIALS. TUBE. RING TENSILE TEST. (EUROPEAN STANDARD EN 10237).)
|
| NF A03-152-2-1999
| 金属材料.布氏硬度试验.第2部分:试验机的验证和校正
| (Metallic materials. Brinell hardness test. Part 2 : verification and calibration of testing machines.)
|
| NF A03-152-3-1999
| 金属材料.布氏硬度试验.第3部分:标准试块的校正
| (Metallic materials. Brinell hardness test. Part 3 : calibration of reference blocks.)
|
| NF A03-153-2-1999
| 金属材料.洛氏硬度试验.第2部分:试验机(刻度 A, B, C, D, E, F, G, H, K, N, T)的验证和校正
| (Metallic materials. Rockwell hardness test. Part 2 : verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T).)
|
| NF A03-153-3-1999
| 金属材料.洛氏硬度试验.第3部分:标准试块的校正(刻度 A, B, C, D, E, F, G, H, K, N, T)
| (Metallic materials. Rockwell hardness test. Part 3 : calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T).)
|
| NF A03-154-1-1998
| 金属材料.维氏硬度试验.第1部分:试验方法
| (Metallic materials. Vickers hardness test. Part 1 : test method.)
|
| NF A03-154-2-1998
| 金属材料.维氏硬度试验.第2部分:试验机械的校准
| (Metallic materials. Vickers hardness test. Part 2 : verification of testing machines.)
|
| NF A03-154-3-1998
| 金属材料.维氏硬度试验.第3部分:标准块的校准
| (Metallic materials. Vickers hardness test. Part 3 : calibration of reference blocks.)
|
| NF A03-155-1-2003
| 金属材料.硬度和材料参数的仪器压痕试验.第1部分:试验方法
| (Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method.)
|
| NF A03-155-2-2003
| 金属材料.硬度和材料参数的仪器压痕试验.第2部分:试验机的检定和校准
| (Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.)
|
| NF A03-155-3-2003
| 金属材料.硬度和材料参数的仪器压痕试验.第3部分:硬度标准块的校准
| (Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.)
|
| NF A03-159-2000
| 金属材料.厚度3mm或小于3mm的板材或带材.反向弯曲试验
| (Metallic materials - Sheet and strip 3 mm thick or less - Reverse bend test.)
|
| NF A03-356-1999
| 金属材料
| (Metallic materials.)
|
| NF A03-652-2003
| 金属材料.薄板材和带材.埃里克森压凹试验
| (Metallic materials - Sheet and strip - Erichsen cupping test.)
|
| NF A03-750-2000
| 金属材料.张力的单轴蠕变试验.试验方法
| (Metallic materials - Uniaxial creep testing in tension - Method of test.)
|
| NF A03-760-1-2003
| 金属材料.拉伸应力松弛试验.第1部分:试验机规程
| (Metallic materials - Tensile stress relaxation testing - Part 1 : procedure for testing machines.)
|
| NF A05-411-2000
| 金属材料抗腐蚀性防护.大气环境中腐蚀的可能性.大气环境中腐蚀性的分类、确定和评价
| (Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments.)
|
| NF A05-412-1-2003
| 金属材料的防腐.土壤腐蚀的可能性.第1部分:总则
| (Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1 : general.)
|
| NF A05-412-2-2003
| 金属材料的防腐.土壤腐蚀的可能性.第2部分:低合金和非合金黑色金属材料
| (Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 2 : low alloyed and non alloyed ferrous materials.)
|
| NF A06-352-1995
| 黑色金属材料的化学分析.钢和铁中砷的测定.分光光度法(欧洲标准EN ISO 10212)
| (Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method.)
|
| NF A06-392-1-2000
| 黑色金属材料的化学分析.钢和铁中氧的测定.第1部分:取样和制备钢样品用于测定氧
| (Chemical analysis of ferrous materials - Determination of oxygen in steel and iron - Part 1 : sampling and preparation of steel samples for oxygen determination.)
|
| NF A08-328-1989
| 黑色金属材料的化学分析.钢铁中铬的测定.火焰原子吸收光谱测定法
| (Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method.)
|
| NF A09-201-1994
| 无损检验.用X和γ射线进行金属材料射线检查的一般原则
| (Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma rays.)
|
| NF A09-250-3-2002
| 无损检验.射线检验.第3部分:用X-射线和γ射线进行金属材料射线检验的一般原理
| (Non-destructive testing - Radioscopic testing - Part 3 : general principles of radioscopic testing of metallic materials by X- and gamma rays.)
|
| NF A49-865-1999
| 金属材料.重量损失磨损试验(欧洲标准EN 10274)
| (METALLIC MATERIALS. DROP WEIGHT TEAR TEST. (EUROPEAN STANDARD EN 10274).)
|
| NF A49-866-1999
| 金属材料.管圈液压试验
| (METALLIC MATERIALS. TUBE RING HYDRAULIC PRESSURE TEST. (EUROPEAN STANDARD EN 10275).)
|
| NF A50-110-8-2003
| 铝和铝合金.废料.第8部分:铝分离工艺中切碎工艺产生的有色金属材料组成的废料
| (Aluminium and aluminium alloys - Scrap - Part 8 : scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes.)
|
| NF A80-230-1-1998
| 焊接和合金过程.金属材料几何缺陷的分类.第1部分:熔焊(欧洲标准6520-1)
| (Welding and allied processes. Classification of geometric imperfections in metallic materials. Part 1 : fusion welding.)
|
| NF A80-230-2-2003
| 焊接和相关工艺.金属材料中几何缺陷的分类.第2部分:带压焊接
| (Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2 : welding with pressure.)
|
| NF A81-331-1984
| 焊接、硬钎焊和硬焊铝及铝合金用填充金属材料.符号.规范
| (Filler materials for welding, brazing and braze welding aluminium and aluminium alloys. Symbolization. Specifications.)
|
| NF A88-112-1998
| 焊接操作人员.焊接操作人员用金属材料全机械化和自动焊接用熔焊和阻焊装置验收试验
| (Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials.)
|
| NF A89-010-1-1992
| 金属材料焊接工艺与验收规范.第1部分:熔焊一般规则(欧洲标准EN 288-1)
| (Specification and approval of welding procedures for metallic materials. Part 1 : general rules for fusion welding.)
|
| NF A89-010-10-1996
| 金属材料焊接工艺的验收和规范.第10部分:电子束焊接工艺规范
| (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 10 : WELDING PROCEDURE SPECIFICATION FOR ELECTRON BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-10).)
|
| NF A89-010-11-1996
| 金属材料焊接工艺的验收和规范.第11部分:激光束焊接工艺规范
| (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 11 : WELDING PROCEDURE SPECIFICATION FOR LASER BEAM WELDING. (EUROPEAN STANDARD EN ISO 9956-11).)
|
| NF A89-010-2-1992
| 金属材料焊接工艺与验收规范.第2部分:电弧焊焊接程序规范(欧洲标准EN 288-2)
| (Specification and approval of welding procedures for metallic materials. Part 2 : welding procedure specification for arc welding.)
|
| NF A89-010-3-1992
| 金属材料焊接工艺的验收和规范.第3部分:钢件电弧焊焊接工艺试验(欧洲标准EN 288-3)
| (Specification and approval of welding procedures for metallic materials. Part 3 : welding procedure tests for the arc welding of steels.)
|
| NF A89-010-5-1994
| 金属材料焊接程序的规范和认可.第5部分:使用批准的电弧焊焊条进行认可
| (Specification and approval of welding procedures for metallic materials. Part 5 : approval by using approved welding consumables for arc welding.)
|
| NF A89-010-6-1994
| 金属材料焊接程序的规范和认可.第6部分:有关以前试验的认可
| (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 6 : APPROVAL RELATED TO PREVIOUS EXPERIENCE. (EUROPEAN STANDARD EN 288-6).)
|
| NF A89-010-7-1995
| 金属材料焊接程序的规范和认可.第七部分:使用电弧焊标准接程序进行认可
| (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATERIALS. PART 7 : APPROVAL BY A STANDARD WELDING PROCEDURE FOR ARC WELDING. (EUROPEAN STANDARD EN 288-7).)
|
| NF A89-010-8-1995
| 金属材料焊接程序的规范和认可.第八部分:利用预生产焊接试验进行认可
| (SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR METALLIC MATEIRALS. PART 8 : APPROVAL BY A PRE-PRODUCTION WELDING TEST. (EUROPEAN STANDARD EN 288-8).)
|
| NF A89-052-2-2001
| 金属材料焊接程序的规范和合格评定.焊接程序规范.第2部分:气焊
| (Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2 : gas welding.)
|
| NF A89-057-11-2002
| 金属材料焊接程序规范和鉴定.焊接程序试验.第11部分:电子和激光射线焊接
| (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11 : electron and laser beam welding.)
|
| NF A89-057-8-2002
| 金属材料焊接程序规范和鉴定.焊接程序试验.第8部分:管对管-板接头的焊接
| (Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8 : welding of tubes to tube-plate joints.)
|
| NF A89-101-1-1998
| 焊接.金属材料焊接推荐.第1部分:电弧焊接的一般指南
| (WELDING. RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS. PART 1 : GENERAL GUIDANCE FOR ARC WELDING. (EUROPEAN STANDARD EN 1011-1).)
|
| NF A89-101-1/A1-2002
| 焊接.金属材料焊接的推荐规范.第1部分:电弧焊接通用指南
| (Welding - Recommendations for welding of metallic materials - Part 1 : general guidance for arc welding.)
|
| NF A89-101-2-2002
| 焊接.金属材料焊接的推荐规范.第2部分:铁素体钢的电弧焊
| (Welding - Recommendations for welding of metallic materials - Part 2 : arc welding of ferritic steel.)
|
| NF A89-101-3-2000
| 焊接.金属材料焊接的推荐方法.第3部分:不锈钢的电弧焊
| (Welding - Recommendations for welding of metallic materials - Part 3 : arc welding of stainless steels.)
|
| NF A89-101-4-2000
| 焊接.金属材料焊接的推荐方法.第4部分:铝和铝合金的电弧焊
| (Welding - Recommendations for welding of metallic materials - Part 4 : arc welding of aluminium and aluminium alloys.)
|
| NF A89-101-5-2003
| 焊接.金属材料焊接的推荐方法.第5部分:包层钢焊接
| (Welding - Recommendations for welding of metallic materials - Part 5 : welding of clad steel.)
|
| NF A89-204-2-1996
| 金属材料焊接的破坏试验.硬度试验.第2部分:焊接接缝的微硬度试验(欧洲标准EN 1043-2)
| (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. HARDNESS TEST. PART 2 : MICRO HARDNESS TESTING ON WELDED JOINTS. (EUROPEAN STANDARD EN 1043-2).)
|
| NF A89-210-1996
| 金属材料焊接的破坏试验.断裂试验.(欧洲标准EN 1320)
| (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. FRACTURE TEST. (EUROPEAN STANDARD EN 1320).)
|
| NF A89-211-1996
| 金属材料焊接的破坏试验.焊接的低倍及显微检验(欧洲标准EN 1321)
| (DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. MACROSCOPIC AND MICROSCOPIC EXAMINATION OF WELDS. (EUROPEAN STANDARD EN 1321).)
|
| NF A89-250-1-1994
| 焊接的质量要求.金属材料的熔焊.第1部分:选择和使用导则
| (Quality requirements for welding. Fusion welding of metallic materials. Part 1 : guidelines for selection and use.)
|
| NF A89-250-2-1994
| 焊接的质量要求.金属材料的熔焊.第2部分:全面质量系统
| (Quality requirements for welding. Fusion welding of metallic materials. Part 2 : comprehensive quality requirements.)
|
| NF A89-250-3-1994
| 焊接的质量要求.金属材料的熔焊.第3部分:标准质量要求
| (Quality requirements for welding. Fusion welding of metallic materials. Part 3 : standard quality requirements.)
|
| NF A89-250-4-1994
| 焊接的质量要求.金属材料的熔焊.第4部分:基本质量要求
| (Quality requirements for welding. Fusion welding of metallic materials. Part 4 : elementary quality requirements.)
|
| NF A89-500-1997
| 焊缝的无损检验.金属材料用一般规则
| (Non-destructive examination of welds. General rules for metallic materials.)
|
| NF A89-500/A1-2003
| 焊接无损检验.金属材料的一般规则
| (Non-destructive examination of welds - General rules for metallic materials.)
|
| NF A89-573-2003
| 金属材料焊缝的有损检验.电阻点焊的扭转试验
| (Destructive tests on welds in metallic materials - Torsion test of resistance spot welds.)
|
| NF A89-574-2003
| 金属材料焊接的无损检验.电阻焊接.电阻缝焊的压力试验
| (Destructive test on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds.)
|
| NF A89-575-2003
| 金属材料焊接的无损检验.测量δ铁素体用的取样方法
| (Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.)
|
| NF A89-600-1998
| 焊接.金属材料的弧双端螺栓焊接(欧洲标准EN ISO 14555)
| (WELDING. ARC STUD WELDING OF METALLIC MATERIALS. (EUROPEAN STANDARD EN ISO 14555).)
|
| NF A89-601-2001
| 焊接.金属材料的摩擦焊接
| (Welding - Friction welding of metallic materials.)
|
| NF A91-474-2001
| 金属材料上的转化涂层.单位面积涂层质量的测定.重量分析法
| (Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods.)
|
| NF A95-301-1977
| 粉末冶金.硬金属除外的烧结金属材料.取样
| (POWDER METALLURGY. SINTERED METAL MATERIALS EXCLUDING HARDMETALS. SAMPLING.)
|
| NF A95-311-1977
| 粉末冶金.透气烧结金属材料.密度和开气孔率的测定
| (POWDER METALLURGY. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY AND OPEN POROSITY.)
|
| NF A95-322-2000
| 硬金属除外的烧结金属材料.拉伸试验块
| (Sintered metal materials, excluding hardmetals - Tensile test pieces.)
|
| NF A95-323/A1-2003
| 不包括硬质合金的烧结金属材料.横向断裂强度的测定.修改件1:精确说明
| (Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength - Amendment 1 : precision statement.)
|
| NF A95-326-1993
| 除硬金属外的烧结金属材料.无缺口试件
| (Sintered metal materials, excluding hardmetals. Unnotched impact test piece.)
|
| NF A95-327-1986
| 粉末冶金.硬金属除外的烧结金属材料.疲劳试验用试件
| (Powder metallurgy. Sintered metal materials excluding hardmetals. Fatigue test pieces.)
|
| NF A95-329-1986
| 粉末冶金.硬金属除外的烧结金属材料.维氏显微硬度的测定
| (POWDER METALLURGY. SINTERED METAL MATERIALS EXCLUDING HARDMETALS. MEASUREMENT OF VICKERS MICROHARDNESS.)
|
| NF A95-342-1985
| 粉末冶金.包括硬金属在内的烧结金属材料.显微照相检查技术
| (POWDER METALLURGY. SINTERED MATERIALS INCLUDING HARDMETALS. MICROGRAPHIC EXAMINATION TECHNIQUES.)
|
| NF A95-771-1-1988
| 烧结金属材料.规范.第1部分:用液体润滑剂浸渍的轴承材料
| (Sintered metal materials. Specifications. Part 1 : materials, for bearings, impregnated with liquid lubricant.)
|
| NF C20-907-2000
| 固体非金属材料暴露于引燃源的可燃性.试验方法清单
| (Flammability of solid non metallic materials when exposed to flame sources - List of test methods.)
|
| NF E01-201-4-2003
| 压力设备.金属材料的技术交货条件的确立
| (Pressure equipment - Part 4 : establishment of technical delivery conditions for metallic materials.)
|
| NF E29-492-2002
| 工业阀门.金属材料的薄片阀
| (Industrial valves - Diaphragm valves made of metallic materials.)
|
| NF E29-648-1-1998
| 可运输储气瓶.储气瓶和阀门材料与气含量的相容性.第1部分:金属材料
| (Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 1 : metallic materials.)
|
| NF E29-648-2-2001
| 可移动式液化气钢瓶.内有气体的钢瓶和阀材料的配合性.第2部分:非金属材料
| (Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2 : non-metallic materials.)
|
| NF L06-387-1991
| 航天结构用焊接和钎焊组装件.用电子束焊接金属材料组装件
| (Weldments and brazements for aerospace structures. Joints of metallic materials by electron beam welding. Quality of weldments.)
|
| NF L06-391-1994
| 航天结构用焊接和钎焊组装件.用扩散焊接法安装金属材料组装件.焊接组装件的质量
| (WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION. ASSEMBLY OF METALLIC MATERIALS CARRIED OUT BY DIFFUSION WELDING. QUALITY OF WELDED ASSEMBLIES.)
|
| NF L06-394-1999
| 飞行器工业.航空与航天结构的焊接和钎焊. 用TIG方法的金属材料焊接组件.焊接质量
| (AIRCRAFT INDUSTRIE. WELDMENTS AND BRAZEMENTS FOR AEROSPACE STRUCTURES. ASSEMBLY OF METALLIC MATERIALS WELDED BY TIG METHOD. QUALITY OF WELDMENTS.)
|
| NF L06-850-2001
| 航空航天系列.非金属材料.设计产品.塑料粒子.技术规范
| (Aerospace series - Non metallic materials - Projecting products - Plastic particles - Technical specification.)
|
| NF L10-005-1-2002
| 航空航天系列.金属材料.第1部分:常规命名
| (Aerospace series - Metallic materials - Part 1 : conventional designation.)
|
| NF L10-006-2002
| 航空航天系列.金属材料.生产进度表、检验进度表、检验和试验报告.定义、一般原理、制备和验收
| (Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval.)
|
| NF L10-015-2002
| 航空航天系列.金属材料.金属半成品产品尺寸标准的起草和说明规则
| (Aerospace series - Metallic materials - Rules for the drafting and presentation of dimensional standards for metallic semi-finished products.)
|
| NF L10-020-1998
| 航空和航天系列.金属材料.一般结构和标准化.EN标准和其使用型之间的链接
| (Aerospace series. Metallic materials. General organization of standardization. Links between types of EN standards and their use.)
|
| NF L10-100-1991
| 航空和航天系列.非金属材料分类用耐火性试验方法
| (Aerospace series. Test methods for the flame resistance rating of non-metallic materials.)
|
| NF L17-005-1992
| 航空航天系列.非金属材料.优选试验温度
| (Aerospace series. Non-metallic materials. Preferred test temperatures.)
|
| NF L17-015-2000
| 航空系列.非金属材料.质量计划的验收和评价及建立的规则
| (Aerospace series - Non-metallic materials - Rules for the establishement, the evolutions and the acceptance of quality plans.)
|
| NF L17-020-1996
| 航空航天系列.非金属材料.液相色谱法特性(高性能液相色谱法.静挤压色层分离法).分类法
| (AEROSPACE SERIES. NON-METALLIC MATERIALS. LIQUID CHROMATOGRAPHY CHARACTERIZATION (HIGH PERFORMANCE LIQUID CHROMATOGRAPHY. STERIC EXCLUSION CHROMATOGRAPHY). GENERAL METHODOLOGY.)
|
| NF L17-021-1998
| 航空航天系列.非金属材料.树脂,粘接剂,增强塑料,预浸渍.用液相色谱测定特性
| (AEROSPACE SERIES. NON-METALLIC MATERIALS. RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.)
|
| NF L17-022-1999
| 航空航天系列.非金属材料.油类、液压油和燃料.液体层析法特征
| (AEROSPACE SERIES. NON-METALLIC MATERIALS. OILS, HYDRAULIC FLUIDS, FUELS. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.)
|
| NF L17-301-1998
| 航空航天系列.非金属材料.结构胶粘剂.试验方法.低漆厚度的测定
| (AEROSPACE SERIES. NON-METALLIC MATERIALS. STRUCTURAL ADHESIVES. TEST METHODS. DETERMINATION OF THE PRIMER THICKNESS. (EUROPEAN STANDARD EN 2781).)
|
| NF L17-310-6-2002
| 航空航天系列.非金属材料.泡沫结构粘合剂.试验方法.第6部分:吸水性的测定
| (Aerospace series - Non-metallic materials - Foaming structural adhesives - Test methods - Part 6 : determination of water absorption.)
|
| NF L19-003-1992
| 航空航天系列.元件和非金属材料中的管腔蜂窝状材料
| (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS IN COMPONENT AND NON-METALLIC MATEIRALS. GENERALITIES.)
|
| NF L22-031-2003
| 紧固件.金属材料的选择
| (Fasteners - Selection of metallic materials.)
|
| NF S91-243-2002
| 牙科用金属材料.抗腐蚀试验方法
| (Dental metallic materials - Corrosion test methods.)
|
| NF S94-051-2000
| 外科植入物.金属材料.锻造不锈钢
| (Implants for surgery - Metallic materials - Wrought stainless steel.)
|
| NF S94-052-1997
| 外科用植入物.金属材料.第2部分:非金属钛
| (Implants for surgery. Metallic materials. Part 2 : unalloyed titanium.)
|
| NF S94-053-1997
| 外科植入物.金属材料.第12部分:锻造钴/铬/钼合金
| (Implants for surgery. Metallic materials. Part 12 : wrought cobalt-chromium-molybdenum alloy.)
|
| NF S94-054-1997
| 外科植入物.金属材料.第4部分:钴铬钼铸造合金
| (Implants for surgery. Metallic materials. Part 4 : cobalt-chromium-molybdenum casting alloy.)
|
| NF S94-055-1997
| 外科用植入物.金属材料.第5部分:锻制钴-铬-钨-镍合金
| (Implants for surgery. Metallic materials. Part 5 : wrought cobalt-chromium-tungsten-nickel alloy.)
|
| NF S94-056-1998
| 外科植入物.金属材料.第6部分:锻压的钴镍铬钼合金
| (Implants for surgery. Metallic materials. Part 6 : wrought cobalt-nickel-chromium-molybdenum alloy.)
|
| NF S94-057-1997
| 外科植入物.金属材料.可锻和冷成型钴铬镍钼铁合金
| (Implants for surgery. Metallic materials. Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy.)
|
| NF S94-058-1998
| 外科植入物.金属材料.第8部分:锻压的钴镍铬钼钨铁合金
| (Implants for surgery. Metallic materials. Part 8 : wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy.)
|
| NF S94-059-1997
| 外科植入物.金属材料.可锻高氮不锈钢
| (Implants for surgery. Metallic materials. Wrought high nitrogen stainless steel.)
|
| NF S94-065-1998
| 外科植入物金属材料.基于磷酸钙包被的砷,汞,铬,铅含量的测定
| (Materials for surgical implants. Determination of arsenic, mercury, cadmium and lead on coatings based on phosphate of calcium.)
|
| NF S94-066-1998
| 外科植入物金属材料.磷酸钙钙/磷比数量的测定
| (Materials for surgical implants. Quantitative determination of the Ca/P ratio of calcium phosphates.)
|
| NF S94-471-2000
| 外科设备.金属材料.第1部分:不锈钢
| (Surgical instruments - Metallic materials - Part 1 : stainless steel.)
|
| 编号 | 中文名称 | 英文名称 |
|---|