ISO金属材料和非金属材料标准(ISO metallic material and nonmetallic material standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
IEC 60404-6-2003 磁性材料.第6部分:使用环形试样的频率范围在20至200kHz的软磁金属材料和粉末材料磁性能的测量方法 Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range of 20 Hz to 200 kHz by the use of ring specimens
IEC 60404-8-6 Edition 2.1-2007 磁性材料.第8-6部分:单项材料规范.软磁金属材料 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
IEC 60404-8-6-1999 磁性材料 第8部分:单项材料规范 第6节:软磁金属材料 Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
IEC 60468-1974 金属材料电阻率测量方法 Method of measurement of resistivity of metallic materials
IEC 60740-2-1993 通信和电子设备用变压器和电感器用铁芯片 第2部分:软磁金属材料制铁芯片的最小磁导率规范 Laminations for transformers and inductors for use in telecommunication and electronic equipment; part 2: specification for the minimum permeabilities of laminations made of soft magnetic metallic materials
ISO 10113-2006 金属材料.薄板材和带材.塑料应变率的测定 Metallic materials - Sheet and strip - Determination of plastic strain ratio
ISO 10271 Technical Corrigendum 1-2005 牙科金属材料.抗腐蚀试验方法.技术勘误1 Dental metallic materials - Corrosion test methods; Technical Corrigendum 1
ISO 10271-2001 牙科金属材料 抗腐蚀试验方法 Dental metallic materials - Corrosion test methods
ISO 10275-2007 金属材料.薄板材和带材.抗拉应力硬化指数的测定 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent
ISO 1099-2006 金属材料.疲劳试验.轴向力控制法 Metallic materials - Fatigue testing - Axial force-controlled method
ISO 11114-1-1997 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第1部分:金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials
ISO 11114-2-2000 移动气瓶 气瓶和瓶阀材料与盛装气体的相容性 第2部分:非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials
ISO 11114-4-2005 移动气瓶.气瓶和瓶阀材料与盛装气体的相容性.第4部分:选择抗氢脆金属材料的试验方法 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement
ISO 11531-1994 金属材料.凸耳试验 Metallic materials; earing test
ISO 12004-1997 金属材料 成形极限图示测定指南 Metallic materials - Guidelines for the determination of forming-limit diagrams
ISO 12106-2003 金属材料.疲劳试验.轴向应变控制法 Metallic materials - Fatigue testing - Axial-strain-controlled method
ISO 12107-2003 金属材料.疲劳试验.数据的统计规划和分析 Metallic materials - Fatigue testing - Statistical planning and analysis of data
ISO 12108-2002 金属材料.疲劳试验.疲劳裂痕增长试验 Metallic materials - Fatigue testing - Fatigue crack growth method
ISO 12135-2002 金属材料.准静态断裂韧性测定的统一试验方法 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12258-1998 航空航天 强度等级小于或等于1275MPa、金属材料制成、有涂覆或未涂覆、具有长MJ螺纹及大径或中径杆型的双六 Aerospace - Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1275 MPa - Dimensions
ISO 12260-1996 航空航天 强度等级小于或等于1100MPa、金属材料制成、有涂覆或未涂覆、短的或中等长度MJ螺纹,阶梯杆型、内 Aerospace - Screws, pan head, internal offset cruciform ribbed or unripped drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
ISO 12261-1996 航空航天 强度等级小于或等于1100MPa、金属材料制成、有涂覆或未涂覆、长长度MJ螺纹、中径杆型、内偏高扭矩 Aerospace - Screws, pan head, internal offset cruciform ribbed or unripped drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
ISO 12281-1999 航空航天.经过或未经过表面处理的金属材料制100°普通沉头实心铆钉.尺寸 Aerospace - Rivets, solid, 100° normal countersunk head, in metallic material, with or without surface treatment - Dimensions
ISO 12737-2005 金属材料.平面变形断裂韧性的测定 Metallic materials - Determination of plane-strain fracture toughness
ISO 13595-2000 航空航天 涂覆或未涂覆、金属材料制、带MJ螺纹游动自锁螺母的螺纹衬套 尺寸 Aerospace - Inserts, with self-locking floating nut, with MJ threads, in metallic material, coated or uncoated - Dimensions
ISO 13596-2000 航空航天 涂覆或未涂覆、金属材料制、带MJ螺纹的封闭型自锁螺纹衬套 尺寸 Aerospace - Inserts, self-locking, with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions
ISO 13597-2000 航空航天 涂覆或未涂覆、金属材料制、带MJ螺纹的开放型自锁螺纹衬套 尺寸 Aerospace - Inserts, self-locking, with MJ threads, open type, in metallic material, coated or uncoated - Dimensions
ISO 13598-2000 航空航天 涂覆或未涂覆、金属材料制、缩减法兰、带MJ螺纹的封闭型自锁螺纹衬套 尺寸 Aerospace - Inserts, self-locking, with MJ threads, reduced flanges, closed type, in metallic material, coated or uncoated - Dimensions
ISO 13599-2000 航空航天 涂覆或未涂覆、金属材料制、带间隙配合孔的螺纹衬套 尺寸 Aerospace - Inserts, with clearance hole, in metallic material, coated or uncoated - Dimensions
ISO 13782-1996 外科植入物 金属材料 外科植入用纯钽材料 Implants for surgery - Metallic materials - Unalloyed tantalum for surgical implant applications
ISO 13921-1996 航空航天.金属材料制涂覆或未涂覆的、强度等级小于或等于1100 MPa、具有大径杆型、短的和中等长度MJ螺纹、 Aerospace - Screws, 100° reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
ISO 14317-2006 硬质合金除外的烧结金属材料.屈服压力强度的测定 Sintered metal materials excluding hardmetals - Determination of compressive yield strength
ISO 14554-1-2000 焊接质量要求 金属材料的电阻焊接 第1部分:完整质量要求 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
ISO 14554-2-2000 焊接质量要求 金属材料的电阻焊接 第2部分:基本质量要求 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements
ISO 14555-2006 焊接.金属材料的电弧螺栓焊 Welding - Arc stud welding of metallic materials
ISO 14577-1-2002 金属材料.硬度和材料参数的仪器压痕试验.第1部分:试验方法 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-2-2002 金属材料.硬度和材料参数的仪器压痕试验.第2部分:试验机的检定和校准 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
ISO 14577-3-2002 金属材料.硬度和材料参数的仪器压痕试验.第3部分:硬度标准块的校准 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
ISO 14577-4-2007 金属材料.测量硬度和材料参数用仪器压痕试验.第4部分:金属和非金属覆层试验方法 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 1460-1992 金属覆盖层 黑色金属材料热浸锌层 单位面积质量的重量法测定 Metallic coatings; hot dip galvanized coatings on ferrous materials; gravimetric determination of the mass per unit area
ISO 14732-1998 焊接人员 金属材料的完全机械化焊接和自动焊接的熔化焊及电阻焊操作人员的资格审查 Welding personnel - Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials
ISO 148-1-2006 金属材料.却贝摆式冲击试验.第1部分:试验方法 Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 148-2-1998 金属材料 夏比摆式冲击试验 第2部分:试验机的验证 Metallic materials - Charpy pendulum impact test - Part 2: Verification of test machines
ISO 148-3-1998 金属材料 夏比摆式冲击试验 第3部分:试验机验证用夏比V标准试样的特性及制备 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V reference test pieces for verification of test machines
ISO 15363-2000 金属材料 管式环液压试验 Metallic materials - Tube ring hydraulic pressure test
ISO 15579-2000 金属材料 低温抗拉试验 Metallic materials - Tensile testing at low temperature
ISO 15607 Technical Corrigendum 1-2005 金属材料焊接过程的规范和鉴定.一般规则.技术勘误1 Specification and qualification of welding procedures for metallic materials - General rules; Technical Corrigendum 1
ISO 15607-2003 金属材料焊接程序规范和合格鉴定.总则 Specification and qualification of welding procedures for metallic materials - General rules
ISO 15609-1 Technical Corrigendum 1-2005 金属材料焊接过程的规范和鉴定.焊接过程规范.第1部分:电弧焊接.技术勘误1 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding; Technical Corrigendum 1
ISO 15609-1-2004 金属材料的焊接程序规范和鉴定.焊接程序规范.第1部分:弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding
ISO 15609-2-2001 金属材料的焊接程序规范和鉴定 焊接程序规范 第2部分:气焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding
ISO 15609-3-2004 金属材料的焊接程序规范和鉴定.焊接程序规范.第3部分:电子束焊 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 3: Electron beam welding
ISO 15609-4-2004 金属材料的焊接程序规范和鉴定.焊接程序规范.第4部分:激光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding
ISO 15609-5-2004 金属材料焊接程序的规范和鉴定.焊接程序规范.第5部分:电阻焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 5: Resistance welding
ISO 15610-2003 金属材料焊接程序规范和合格鉴定.基于试验焊接消耗品的合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables
ISO 15611-2003 金属材料焊接程序规范和合格鉴定.根据已有焊接经验进行合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience
ISO 15612-2004 金属材料的焊接程序规范和鉴定.通过标准焊接程序的采用进行合格鉴定 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure
ISO 15613-2004 金属材料的焊接程序规范和鉴定.基于预生产焊接试验的鉴定 Specification and qualification of welding procedures for metallic materials - Qualification based on pre-production welding test
ISO 15614-1 Technical Corrigendum 1-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第1部分:钢的电弧焊接和气焊以及镍和镍合金的电弧焊接.技术勘 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys; Technical Corrigendum 1
ISO 15614-1-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第1部分:钢的电弧焊和气焊及镍和镍合金的电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
ISO 15614-10-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第10部分:高压干焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 10: Hyperbaric dry welding
ISO 15614-11-2002 金属材料焊接程序的规范和鉴定.焊接程序试验.第11部分:电子和激光束焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
ISO 15614-12-2004 金属材料焊接程序的规范和鉴定.焊接过程试验.第12部分:点焊、缝焊和凸焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding
ISO 15614-13-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第13部分:电阻对接焊和电弧对接焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Resistance butt and flash welding
ISO 15614-2 Technical Corrigendum 1-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第2部分:铝及其合金的电弧焊接.技术勘误1 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys; Technical Corrigendum 1
ISO 15614-2-2005 金属材料焊接程序的规范和鉴定.焊接过程试验.第2部分:铝和铝合金电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys
ISO 15614-4 Technical Corrigendum 1-2007 金属材料焊接过程的规范和鉴定.焊接过程试验.第4部分:铝铸件的精工焊接.技术勘误1 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings; Technical Corrigendum 1
ISO 15614-4-2005 金属材料焊接过程的规范和鉴定.焊接过程试验.第4部分:铝铸件的精工焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings
ISO 15614-5-2004 金属材料焊接程序的规范和鉴定.焊接程序试验.第5部分:钛、锆及其合金的电弧焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys
ISO 15614-6-2006 金属材料焊接程序的规范和鉴定.焊接程序试验.第6部分:铜及其合金的电弧焊接和气焊 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys
ISO 15614-7-2007 金属材料焊接程序规范和鉴定.焊接程序试验.第7部分:覆盖焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding
ISO 15614-8-2002 金属材料焊接程序的规范和鉴定.焊接程序试验.第8部分:管对管板接头焊接 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints
ISO 15620-2000 焊接 金属材料的摩擦焊接 Welding - Friction welding of metallic materials
ISO 17635-2003 焊缝的无损检验.金属材料熔焊的一般规则 Non-destructive testing of welds - General rules for fusion welds in metallic materials
ISO 17641-1-2004 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第1部分:总则 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 1: General
ISO 17641-2-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第2部分:自束试验 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests
ISO 17642-1-2004 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第1部分:总则 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General
ISO 17642-2-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第2部分:自束试验 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests
ISO 17642-3-2005 金属材料焊接的有损试验.焊接的冷裂试验.弧焊工艺.第3部分:外部载荷试验 Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests
ISO 17653-2003 金属材料接头的破坏检验.电阻点焊的扭转试验 Destructive tests on welds in metallic materials - Torsion test of resistance spot welds
ISO 17654-2003 金属材料焊接的破坏检验.电阻焊接.电阻缝焊的压力试验 Destructive tests on welds in metallic materials - Resistance welding - Pressure test on resistance seam welds
ISO 17655-2003 金属材料焊接的有损试验.测量δ铁素体用的取样方法 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
ISO 18265-2003 金属材料.硬度值的换算 Metallic materials - Conversion of hardness values
ISO 18278-1-2004 阻焊.可焊性.第1部分:金属材料的电阻点焊、缝焊和凸焊的可焊性评定 Resistance welding - Weldability - Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials
ISO 19819-2004 金属材料.液态氦中的抗拉试验 Metallic materials - Tensile testing in liquid helium
ISO 20160-2006 外科植入物.金属材料.α+ β钛合金棒材的微观结构的分类 Implants for surgery - Metallic materials - Classification of microstructures for alpha+beta titanium alloy bars
ISO 204-1997 金属材料 连续单轴蠕变拉力试验 试验方法 Metallic materials - Uninterrupted uniaxial creep testing in tension - Method of test
ISO 20482-2003 金属材料.薄板材和带材.埃里克森杯突试验 Metallic materials - Sheet and strip - Erichsen cupping test
ISO 22538-2-2007 航天系统.氧气安全.第2部分:氧气系统及组件用金属材料的选择 Space systems - Oxygen safety - Part 2: Selection of metallic materials for oxygen systems and components
ISO 22538-3-2007 航天系统.氧气安全.第3部分:氧气系统及组件用非金属材料的选择 Space systems - Oxygen safety - Part 3: Selection of non-metallic materials for oxygen systems and components
ISO 22674-2006 牙科.固定式和可摘式修复体和牙科器具用金属材料 Dentistry - Metallic materials for fixed and removable restorations and appliances
ISO 22826-2005 金属材料焊缝的破坏性试验.激光和电子束焊接窄接头的硬度试验(维氏和努氏硬度试验) Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
ISO 2738-1999 烧结金属材料,不包括硬质金属 密度、含油量和开孔率的测定 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
ISO 2740-2007 烧结金属材料(不包括硬质金属).拉伸试验试样 Sintered metal materials, excluding hardmetals - Tensile test pieces
ISO 3185-1993 航空航天 强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型的普 Aerospace; bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
ISO 3186-1994 航空航天 强度等级1250 MPa~1800 MPa、有涂层或无涂层、金属材料制成的标准柄、短或中等长度MJ螺纹、大径 Aerospace - Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1250 MPa to 1800 MPa - Dimensions
ISO 3193 Technical Corrigendum 1-1992 航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型普 Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPA; dimensions; technical corrigendum 1
ISO 3193-1991 航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、短的或中等长度MJ螺纹、大径杆型普 Aerospace; bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
ISO 3202-1997 航空航天 强度等级小于或等于1100 MPa、有涂层或无涂层、金属材料制成、带内偏高扭矩十字槽或不打滑扳动结 Aerospace - Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa - Dimensions
ISO 3203-1993 航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、普通双 Aerospace; bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
ISO 3312-1987 烧结金属材料和硬质合金 弹性模量的测定 Sintered metal materials and hardmetals; Determination of Young modulus
ISO 3325-1996 烧结金属材料,不包括硬质金属 横向断裂强度的测定 Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
ISO 3369-2006 致密烧结金属材料与硬质合金密度测定方法 Impermeable sintered metal materials and hardmetals - Determination of density
ISO 376-2004 金属材料.单轴向试验机验证用作用力检验仪的校准 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 3785-2006 金属材料.关于产品质地的试验样品轴的命名 Metallic materials - Designation of test specimen axes in relation to product texture
ISO 3834-1-2005 金属材料的熔化焊质量要求.第1部分:质量要求的适当等级的选择标准 Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements
ISO 3834-2-2005 金属材料的熔化焊质量要求.第2部分:完整质量要求 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements
ISO 3834-3-2005 金属材料的熔化焊质量要求.第3部分:标准质量要求 Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements
ISO 3834-4-2005 金属材料的熔化焊质量要求.第4部分:基本质量要求 Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
ISO 3834-5 Technical Corrigendum 1-2007 金属材料熔焊的质量要求.第5部分:有必要声明和ISO 3834-2、ISO 3834-3或ISO 3834-4质量要求一致的文件.技术 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4; Technical Corrigendum 1
ISO 3834-5-2005 金属材料的熔化焊质量要求.第5部分:有必要声明和ISO 3834-2、 ISO 3834-3或ISO 3834-4质量要求一致的文件 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
ISO 3892-2000 金属材料上的转化膜 单位面积膜层质量的测定 重量法 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
ISO 3928-1999 烧结金属材料,不包括硬质金属 疲劳试验试样 Sintered metal materials, excluding hardmetals - Fatigue test pieces
ISO 4003-1977 可渗性烧结金属材料 气泡试验孔径的测定 Permeable sintered metal materials; Determination of bubble test pore size
ISO 4022-1987 可渗性烧结金属材料 液体渗透性的测定 Permeable sintered metal materials; Determination of fluid permeability
ISO 4136-2001 金属材料焊接的破坏性试验 横向拉申试验 Destructive tests of welds in metallic materials - Traverse tensile test
ISO 4498-2005 不包括硬质金属的烧结金属材料.表观硬度和显微硬度的测定 Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness
ISO 4545-1-2005 金属材料.努氏硬度试验.第1部分:试验方法 Metallic materials - Knoop hardness test - Part 1: Test method
ISO 4545-2-2005 金属材料.努氏硬度试验.第2部分:试验机的验证和校准 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines
ISO 4545-3-2005 金属材料.努氏硬度试验.第3部分:参考块的校正 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks
ISO 4545-4-2005 金属材料.努氏硬度试验.第4部分:硬度值表 Metallic materials - Knoop hardness test - Part 4: Table of hardness values
ISO 5178-2001 金属材料焊接的破坏性试验 熔焊接头的焊接金属的纵向拉申试验 Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints
ISO 5579-1998 无损检测 金属材料用X和γ射线照相检验 基本规则 Non-destructive testing - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules
ISO 5754-1978 烧结金属材料,不包括硬质金属 无切口冲击试样 Sintered metal materials, excluding hardmetals; Unnotched impact test piece
ISO 5755-2001 烧结金属材料 规范 Sintered metal materials - Specifications
ISO 5832-1-2007 外科植入物.金属材料.第1部分:可锻不锈钢 Implants for surgery - Metallic materials - Part 1: Wrought stainless steel
ISO 5832-11-1994 外科植入物 金属材料 第11部分:锻造钛6铝7铌合金 Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy
ISO 5832-12-2007 外科植入物 金属材料 第12部分:锻造钴铬钼合金 Implants for surgery - Metallic materials - Part 12: Wrought cobalt-chromium-molybdenum alloy
ISO 5832-14-2007 外科植入物.金属材料.第14部分:可锻钛15-钼5-锆3-铝合金 Implants for surgery - Metallic materials - Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
ISO 5832-2-1999 外科植入物 金属材料 第2部分:纯钛 Implants for surgery - Metallic materials - Part 2: Unalloyed titanium
ISO 5832-3-1996 外科植入物 金属材料 第3部分:锻造钛6铝4钒合金 Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
ISO 5832-4-1996 外科植入物 金属材料 第4部分:钴铬钼铸造合金 Implants for surgery - Metallic materials - Part 4: Cobalt-chromium-molybdenum casting alloy
ISO 5832-5-2005 外科植入物.金属材料.第5部分:锻造钴铬钨镍合金 Implants for surgery - Metallic materials - Part 5: Wrought cobalt-chromium-tungsten-nickel alloy
ISO 5832-6-1997 外科植入物 金属材料 第6部分:锻造钴镍铬钼合金 Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy
ISO 5832-7-1994 外科植入物 金属材料 第7部分:锻造冷成形钴铬镍钼合金 Implants for surgery; metallic materials; part 7: forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
ISO 5832-8-1997 外科植入物 金属材料 第8部分:锻造钴镍铬钼钨铁合金 Implants for surgery - Metallic materials - Part 8: Wrought cobalt-nickel-chromium-molybdenum-tungsten-iron alloy
ISO 5832-9-2007 外科植入物.金属材料.第9部分:锻制高氮不锈钢 Implants for surgery - Metallic materials - Part 9: Wrought high nitrogen stainless steel
ISO 5856-1991 航空航天 强度等级小于或等于1100 MPa、金属材料制成、有涂层或无涂层、带有中或短长度MJ螺纹、大径杆型及 Aerospace; screws, 100 normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
ISO 6506-1-2005 金属材料.布氏硬度试验.第1部分:试验方法 Metallic materials - Brinell hardness test - Part 1: Test method
ISO 6506-2-2005 金属材料.布氏硬度试验.第2部分:试验机的检验和校准 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO 6506-3-2005 金属材料.布氏硬度试验.第3部分:基准块的校准 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks
ISO 6506-4-2005 金属材料.布氏硬度试验.第4部分:硬度值表格 Metallic materials - Brinell hardness test - Part 4: Table of hardness values
ISO 6507-1-2005 金属材料.维氏硬度试验.第1部分:试验方法 Metallic materials - Vickers hardness test - Part 1: Test method
ISO 6507-2-2005 金属材料.维氏硬度试验.第2部分:试验机的检验和校准 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines
ISO 6507-3-2005 金属材料.维氏硬度试验.第3部分:标准块的校准 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks
ISO 6507-4-2005 金属材料.维氏硬度试验.第4部分:硬度值表格 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values
ISO 6508-1-2005 金属材料.洛氏硬度试验.第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T刻度) Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-2-2005 金属材料.洛氏硬度试验.第2部分:试验机的检验和校准(A、B、C、D、E、F、G、H、K、N、T刻度) Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6508-3-2005 金属材料.洛氏硬度试验.第3部分:基准块的校准(A、B、C、D、E、F、G、H、K、N、T刻度) Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T)
ISO 6520-1-2007 焊接和相关工艺.金属材料中几何缺陷的分类.第1部分:熔焊 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding
ISO 6520-2-2001 焊接及相关工艺 金属材料的几何缺陷的分类 第2部分:压焊 Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure
ISO 6892-1998 金属材料 环境温度下拉伸试验 Metallic materials - Tensile testing at ambient temperature
ISO 7153-1 AMD 1-1999 外科器械 金属材料 第1部分:不锈钢 修改1 Surgical instruments - Metallic materials - Part 1: Stainless steel; Amendment A1
ISO 7153-1-1991 外科器械 金属材料 第1部分:不锈钢 Surgical instruments; metallic materials; part 1: stainless steel
ISO 7438-2005 金属材料.弯曲试验 Metallic materials - Bend test
ISO 7500-1-2004 金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ISO 7500-2-2006 金属材料.静态单轴向试验机的验证.第2部分:拉伸蠕变试验机.作用力的验证 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force
ISO 7625-2006 不包括硬质金属的烧结金属材料.碳含量测定用化学分析样品的制备 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 7799-1985 金属材料 厚度3mm或小于3mm的板材或带材 反向弯曲试验 Metallic materials; Sheet and strip 3 mm thick or less; Reverse bend test
ISO 7800-2003 金属材料.线材.单向扭转试验 Metallic materials - Wire - Simple torsion test
ISO 7801-1984 金属材料 线材 反复弯曲试验 Metallic materials; Wire; Reverse bend test
ISO 7802-1983 金属材料 线材 缠绕试验 Metallic materials; Wire; Wrapping test
ISO 783-1999 金属材料 高温拉伸试验 Metallic materials - Tensile testing at elevated temperature
ISO 8280-1993 航空航天 由金属材料制成,经过或没有经过表面处理的普通头实心铆钉 尺寸 Aerospace; rivets, solid, universal head, metallic material, with or without surface treatment; dimensions
ISO 8491-1998 金属材料 管材(全截面) 弯曲试验 Metallic materials - Tube (in full section) - Bend test
ISO 8492-1998 金属材料 管材 压扁试验 Metallic materials - Tube - Flattening test
ISO 8493-1998 金属材料 管材 扩口试验 Metallic materials - Tube - Drift-expanding test
ISO 8494-1998 金属材料 管材 卷边试验 Metallic materials - Tube - Flanging test
ISO 8495-1998 金属材料 管材 环形扩口试验 Metallic materials - Tube - Ring-expanding test
ISO 8496-1998 金属材料 管材 环形拉伸试验 Metallic materials - Tube - Ring tensile test
ISO 9015-1-2001 金属材料焊接的破坏性试验 硬度试验 第1部分:弧焊接头的硬度试验 Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints
ISO 9015-2-2003 金属材料焊接的破坏性试验.硬度试验.第2部分:焊接件的显微硬度试验 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
ISO 9016-2001 金属材料焊接的破坏性试验 碰撞试验 试验样品的位置、切口的朝向和检查 Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination
ISO 9017-2001 金属材料焊接的破坏性试验 断裂试验 Destructive tests on welds in metallic materials - Fracture test
ISO 9018-2003 金属材料焊接的破坏性试验.十字形接缝和搭接缝的抗拉试验 Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints
ISO 9254-1993 航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、普通在 Aerospace; bolts, normal spline head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
ISO 9255-1993 航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准柄、短或中等长度MJ螺纹、普通在 Aerospace; bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
ISO 9256-1993 航空航天.强度等级小于或等于1100MPa、有涂层或无涂层、金属材料制成的标准直径或中径柄、长MJ螺纹、大六角 Aerospace; bolts, large hexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1100 MPa; dimensions
ISO 9513-1999 金属材料 单轴向试验用引伸计的校准 Metallic materials - Calibration of extensometers used in uniaxial testing
ISO 9649-1990 金属材料 线材 反复扭转试验 Metallic materials; wire; reverse torsion test
ISO/TR 11552-1997 激光和激光设备 激光材料处理机械 性能规范和金属材料切削基准 Lasers and laser-related equipment - Laser materials-processing machines - Performance specifications and benchmarks for cutting of metals
ISO/TR 14321-1997 烧结金属材料,不包括硬质金属 金相制备和检验 Sintered metal materials, excluding hardmetals - Metallographic preparation and examination
ISO/TR 14936-1998 金属材料 应力分析报告 Metallic materials - Strain analysis report
ISO/TR 15608-2005 焊接.金属材料分类体系指南 Welding - Guidelines for a metallic materials grouping system
ISO/TR 16060-2003 金属材料上焊缝的有损检验.宏观和微观检查用腐蚀剂 Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination
ISO/TR 17641-3-2005 金属材料焊接的有损试验.焊接的热裂试验.弧焊工艺.第3部分:外部负载试验 Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests
ISO/TR 17671-1-2002 焊接.金属材料焊接的推荐.第1部分:电弧焊接通用指南 Welding - Recommendations for welding of metallic materials - Part 1: General guidance for arc welding
ISO/TR 17671-2-2002 焊接.金属材料焊接的推荐.第2部分:铁素体钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Part 2: Arc welding of ferritic steels
ISO/TR 17671-3-2002 焊接.金属材料焊接的推荐.第3部分:不锈钢的电弧焊接 Welding - Recommendations for welding of metallic materials - Part 3: Arc welding of stainless steels
ISO/TR 17671-4-2002 焊接.金属材料焊接的推荐.第4部分:铝和铝合金的电弧焊接 Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
ISO/TR 17671-5-2004 焊接.金属材料焊接的推荐.第5部分:覆层钢的焊接 Welding - Recommendations for welding of metallic materials - Part 5: Welding of clad steels
ISO/TR 17671-6-2005 焊接.金属材料焊接建议.第6部分:激光束焊接 Welding - Recommendations for welding of metallic materials - Part 6: Laser beam welding
ISO/TR 17671-7-2004 焊接.金属材料焊接的推荐.第7部分:电子束焊接 Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding
ISO/TR 3834-6-2007 金属材料氧炔焊质量要求.第6部分:实施 ISO 3834导则 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834
ISO/TR 581-2005 可焊性.金属材料.一般原则 Weldability - Metallic materials - General principles
ISO/TS 16630-2003 金属材料.扩孔试验法 Metallic materials - Method of hole expanding test
编号中文名称英文名称

返回