| 编号 | 中文名称 | 英文名称 |
|---|
| EN 12255-3-2000+AC-2000
| 废水处理厂 第3部分：预处理
| Wastewater treatment plants - Part 3: Preliminary treatment
|
| EN 12300-1998
| 低温容器 低温设备的清洁度
| Cryogenic vessels - Cleanliness for cryogenic service
|
| EN 13507-2001
| 热喷镀 热喷镀金属部件和元件的表面预处理
| Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
|
| EN 2591-604-2001
| 航空航天系列 光电连接元件 试验方法 第604部分：光学元件 光学表面的清洁度
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 604: Optical elements; Cleaning capability of optical face
|
| EN 50176-1996
| 易燃液体喷涂材料用自动静电喷涂装置
| Automatic electrostatic spraying installations for flammable liquid spraying material
|
| EN 50177-1996
| 易燃喷涂粉末用自动静电喷涂装置
| Automatic electrostatic spraying installations for flammable coating powder
|
| EN 60811-4-2-1999
| 电缆绝缘和护套材料 通用试验方法 第4部分：聚乙烯和聚丙烯化合物专用方法 第2节：预处理后抗拉强度和断
| Insulating and sheathing materials of electric and optical fibre cables - Common test methods - Part 4: Methods specific to polyethylene and polypropylene compounds - Section 2: Tensile strength and elongation at break after pre-conditioning-Wrapping text often thermal ageing in air-Measurement of mass increase-Long-term stablity text-Text method for Copper-cotalyed oxidation
|
| EN ISO 11124-1-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分：一般介绍及分类
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:1993)
|
| EN ISO 11124-2-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分：冷硬铸铁丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993)
|
| EN ISO 11124-4-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分：低碳铸钢丸
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993)
|
| EN ISO 11125-5-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法第5部分：缺陷颗粒的百分比和微结构的测定
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:1993)
|
| EN ISO 11126-1-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第1部分：总体介绍和分类(包括技术勘误1
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:1993, including Technical Corrigenda 1:1997 and 2:
|
| EN ISO 11126-6-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第6部分：炼铁炉渣
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993)
|
| EN ISO 11126-8-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求第8部分：橄榄石砂
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993)
|
| EN ISO 11127-1-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第1部分：抽样
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:1993)
|
| EN ISO 11127-2-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第2部分：颗粒尺寸分布的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:1993)
|
| EN ISO 11127-3-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第3部分：表观密度测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:1993)
|
| EN ISO 11127-4-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第4部分：通过玻璃载片试验评定硬度
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO 11127-4:1993)
|
| EN ISO 11127-5-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第5部分：含水量测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993)
|
| EN ISO 11127-6-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第6部分：通过测量电导率测定水溶性杂质
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:1993)
|
| EN ISO 11127-7-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法第7部分：水溶性氯化物的测定
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water soluble chlorides (ISO 11127-7:1993)
|
| EN ISO 8501-1 Supplement-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分的补充信息：用不同磨料喷砂处理时钢表面
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast
|
| EN ISO 8501-1-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第1部分：未涂装的钢材和全面清除原有涂层后钢材
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previo
|
| EN ISO 8501-2-2001
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分：局部清除原有涂层后钢材的锈蚀等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings (ISO 8501-2:1994)
|
| EN ISO 8502-2-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第2部分：清理过的表面上的氯化物的实验室测定
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO 8502-2:1992)
|
| EN ISO 8502-3-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分：油漆前预处理后的钢材表面上的灰尘评定
| Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) (ISO 8502-3:1992)
|
| EN ISO 8502-4-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分：油覆前凝露可能性的评定导则
| Preparation of steel substrates before application of paint and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:1993)
|
| EN ISO 8502-6-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第6部分：分析用可溶性杂质的提取 Bresle法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:1995)
|
| EN ISO 8502-9-2000
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导测定法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts (ISO 8502-9:1998)
|
| EN ISO 8503-1-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分：磨料喷射清理表面粗糙度的ISO评
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abr
|
| EN ISO 8503-2-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分：磨料喷射清理表面粗糙度的定级
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator proce
|
| EN ISO 8503-3-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分：ISO表面轮廓比较仪的校准方法和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of s
|
| EN ISO 8503-4-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分：ISO表面轮廓比较仪的校准方法和
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of s
|
| EN ISO 8504-1-2001
| 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分：总则
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000)
|
| EN ISO 8504-2-2001
| 涂装油漆和有关产品前钢材预处理 表面预处理方法 第2部分：磨料喷射清理
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000)
|
| EN ISO 8504-3-2001
| 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分：手工和动力工具清洗
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993)
|
| ENV ISO 8502-1-1999
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第1部分：可溶性铁锈现场试验
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 1: Field test for soluble iron corrosion products (ISO/TR 8502-1:1991)
|
| prEN 12921-1-1997
| 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第1部分：通用安全要求
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 1: Common safety requirements
|
| prEN 12921-2-1997
| 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第2部分： 使用水基清洗液的机器安全性
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
|
| prEN 12921-3-1997
| 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第3部分使用液体或蒸气的对工业品进行表面清洁和预
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
|
| prEN 12921-4-1997
| 使用液体或蒸气的对工业品进行表面清洁和预处理的机器 第4部分：使用卤化溶剂的机器安全性
| Machines for surface cleaning and pretreatment of industrial items using liquids or vapours - Part 4: Safety of machines using halogenated solvents
|
| 编号 | 中文名称 | 英文名称 |
|---|