| 编号 | 中文名称 | 英文名称 |
|---|
| NF A87-013-2-1999
| 焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊
| (WELDING AND ALLIED PROCESSES. JOINT PREPARATION. PART 2 : SUBMERGED ARC WELDING OF STEELS. (EUROPEAN STANDARD EN ISO 9692-2).)
|
| NF A87-013-3-2001
| 焊接和相关工艺.接头预处理的推荐方法.第3部分:铝和铝合金的金属焊条惰性气体保护焊和钨极惰性气体保护焊
| (Welding and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.)
|
| NF A91-224-2001
| 热喷涂.热喷涂用金属零部件的表面预处理
| (Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying.)
|
| NF E48-659-2003
| 液压传动.部件和元件的清洁度.与污物收集、分析和数据报告相关的检验文件和原则
| (Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting.)
|
| NF E86-509-1999
| 低温容器.低温设施的清洁度
| (CRYOGENIC VESSELS. CLEANLINESS FOR CRYOGENIC SERVICE. (EUROPEAN STANDARD EN 12300).)
|
| NF G07-138-1-1998
| 织物.干洗和整理.第1部分:织物和衣服清洁度的评估方法
| (Textiles. Dry-cleaning and finishing. Part 1 : method for assessing the cleanability of textiles and garments.)
|
| NF M60-790-3-1999
| 原子能.环境土壤中放射性的测量.第3部分:土壤样品预处理方法
| (NUCLEAR ENERGY. MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT-SOIL. PART 3 : METHODOLOGY FOR SOIL SAMPLES PRETREATMENT.)
|
| NF P16-700-3-2001
| 污水处理厂.第3部分:预处理
| (Wastewater treatment plants - Part 3 : preliminary treatment.)
|
| NF T35-501-1-2001
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分:未涂覆钢衬底和已有覆层全部除去后钢衬底
| ()
|
| NF T35-501-2-2001
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第2部分:已有覆层局部除去后已涂覆钢衬底的制备等
| (Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2 : preparation grades of previously coated steel substrates after l)
|
| NF T35-502-2-1999
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第2部分:已清洁表面氯化物的实验室测定
| (Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 2 : laboratory determination of chloride on cleaned surfaces.)
|
| NF T35-502-3-1999
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第3部分:涂漆钢表面灰尘评定(压敏带法)
| ()
|
| NF T35-502-4-1999
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第4部分:涂料涂覆前凝结可能性的评定导则
| (Preparation of steel substrates before application of paint and related products. Tests for the assessment of surface cleanliness. Part 4 : guidance on the estimation of the probability of condensation prior to paint application.)
|
| NF T35-502-6-1999
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的试验.第6部分:Bresle法分析用可溶性杂质的析取
| (PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS. PART 6 : EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS. THE BRESLE METHOD. (EUROPEAN STANDARD EN ISO 8502-6).)
|
| NF T35-502-9-2001
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的评定试验.第9部分:水溶盐电导仪测定的现场方法
| (Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9 : field method for the conductometric determination of wate)
|
| NF T90-357-1-2003
| 水质.河流中水底硅藻的常规取样和预处理指南标准
| (Water quality - Guidance standard for the routine sampling and pretreatment of benthic diatoms from rivers.)
|
| NF X31-425-2003
| 土质.测定有机污物用试样的预处理
| (Soil quality - Pretreatment of samples for determination of organic contaminants.)
|
| NF X44-101-1999
| 无菌室和相关受控环境.第1部分:空气清洁度分级
| (Cleanrooms and associated controlled environments. Part 1 : classification of air cleanliness.)
|
| XP T35-502-1-1999
| 涂料和相关产品应用前钢衬底的准备.表面清洁度的评价试验
| (Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness.)
|
| 编号 | 中文名称 | 英文名称 |
|---|