| 编号 | 中文名称 | 英文名称 |
|---|
| IEC/PAS 62182 Edition 1.0-2000
| 可靠度检验之前的不密闭的表面安装器件的预处理
| Preconditioning of nonhermetic surface mount devices prior to reliability testing
|
| ISO 11124-1-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第1部分:一般介绍及分类
| Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 1: general introduction and classification
|
| ISO 11124-2-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第2部分:冷硬铸铁丸
| Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 2: chilled-iron grit
|
| ISO 11124-3-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第3部分:高碳铸钢丸和砂
| Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 3: high-carbon cast-steel shot and grit
|
| ISO 11124-4-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的技术要求 第4部分:低碳铸钢丸
| Preparation of steel substrates before application of paints and related products; specifications for metallic blast-cleaning abrasives; part 4: low-carbon cast-steel shot
|
| ISO 11125-1-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第1部分:抽样
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
|
| ISO 11125-2-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 2: determination of particle size distribution
|
| ISO 11125-3-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第3部分:硬度测定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 3: determination of hardness
|
| ISO 11125-4-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第4部分:表观密度测定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 4: determination of apparent density
|
| ISO 11125-5-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒的百分比和微结构的测定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 5: determination of percentage defective particles and of microstructure
|
| ISO 11125-6-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质测定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 6: determination of foreign matter
|
| ISO 11125-7-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用金属磨料的试验方法 第7部分:含水量测定
| Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture
|
| ISO 11126-1 Technical Corrigendum 1-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误1
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 1
|
| ISO 11126-1 Technical Corrigendum 2-1997
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类 技术勘误2
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification; Technical Corrigendum 2
|
| ISO 11126-1-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第1部分:总体介绍和分类
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 1: general introduction and classification
|
| ISO 11126-10-2000
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第10部分:铁铅石榴石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garne
|
| ISO 11126-3-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第3部分:铜精炼渣
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 3: copper refinery slag
|
| ISO 11126-4-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第4部分:煤炉渣
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 4: coal furnace slag
|
| ISO 11126-5-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第5部分:镍精炼渣
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 5: nickel refinery slag
|
| ISO 11126-6-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 6: iron furnace slag
|
| ISO 11126-7 Technical Corrigendum 1-1999
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 技术勘误1
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1
|
| ISO 11126-7-1995
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide
|
| ISO 11126-8-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第8部分:橄榄石砂
| Preparation of steel substrates before application of paints and related products; specifications for non-metallic blast-cleaning abrasives; part 8: olivine sand
|
| ISO 11126-9-1999
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第9部分:十字石
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite
|
| ISO 11127-1-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第1部分:抽样
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling
|
| ISO 11127-2-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 2: determination of particle size distribution
|
| ISO 11127-3-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第3部分:表观密度测定
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 3: determination of apparent density
|
| ISO 11127-4-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第4部分:通过玻璃载片试验评定硬度
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 4: assessment of hardness by a glass slide test
|
| ISO 11127-5-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第5部分:含水量测定
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 5: determination of moisture
|
| ISO 11127-6-1993
| 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的试验方法 第6部分:通过测量电导率测定水溶性杂质
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 6: determination of water-soluble contaminants by conductivity measurement
|
| ISO 11127-7-1993
| 涂装油漆和有关产品前钢材预处理 非金属喷沙清理磨料的试验方法 第7部分:水溶性氯化物的测定
| Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 7: determination of water-soluble chlorides
|
| ISO 11218-1993
| 航空航天 液压油液清洁度分级
| Aerospace; cleanliness classification for hydraulic fluids
|
| ISO 11464-2006
| 土壤质量.物理化学分析用样品的预处理
| Soil quality - Pretreatment of samples for physico-chemical analysis
|
| ISO 11998-2006
| 色漆和清漆.测定涂层的耐湿性和清洁度
| Paints and varnishes - Determination of wet-scrub resistance and cleanability of coatings
|
| ISO 12345-2002
| 柴油发动机.燃料喷射设备的清洁度评定
| Diesel engines - Cleanliness assessment of fuel injection equipment
|
| ISO 14507-2003
| 土质.测定有机污物用试样的预处理
| Soil quality - Pretreatment of samples for determination of organic contaminants
|
| ISO 14952-1-2003
| 航天系统.流体系统的表面清洁度.第1部分:词汇
| Space systems - Surface cleanliness of fluid systems - Part 1: Vocabulary
|
| ISO 14952-2-2003
| 航天系统.流体系统的表面清洁度.第2部分:清洁度等级
| Space systems - Surface cleanliness of fluid systems - Part 2: Cleanliness levels
|
| ISO 14952-3-2003
| 航天系统.流体系统的表面清洁度.第3部分:非挥发性残余物和粒子浓度的测定用分析方法
| Space systems - Surface cleanliness of fluid systems - Part 3: Analytical procedures for the determination of nonvolatile residues and particulate contamination
|
| ISO 14952-4-2003
| 航天系统.流体系统的表面清洁度.第4部分:初步清洁过程
| Space systems - Surface cleanliness of fluid systems - Part 4: Rough-cleaning processes
|
| ISO 14952-5-2003
| 航天系统.流体系统的表面清洁度.第5部分:干燥过程
| Space systems - Surface cleanliness of fluid systems - Part 5: Drying processes
|
| ISO 14952-6-2003
| 航天系统.流体系统的表面清洁度.第6部分:精细清洁过程
| Space systems - Surface cleanliness of fluid systems - Part 6: Precision-cleaning processes
|
| ISO 15388-2004
| 空间系统.污染和清洁度控制
| Space systems - Contamination and cleanliness control
|
| ISO 16720-2005
| 土质.连续分析用试样的冻干法预处理
| Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
|
| ISO 18413-2002
| 液压传动.部件和元件的清洁度.与污物收集、分析和数据报告相关的检验文件和原则
| Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting
|
| ISO 6761-1981
| 钢管 焊接用管端和配件的预处理
| Steel tubes; Preparation of ends of tubes and fittings for welding
|
| ISO 8501-1 Supplement-1994
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分的补充信息:用不同磨料喷砂处理时钢表面变
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Informative supplement to Part 1: Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
|
| ISO 8501-1-1988
| 涂料和有关产品使用前钢衬底的制备.表面清洁度的视觉评价.第1部分:未涂覆钢衬底和已有覆层全部除去后钢衬底
| Preparation of steel substrates before application of paints and related products; visual assessment of surface cleanliness; part 1: rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
|
| ISO 8501-2-1994
| 涂装油漆和有关产品前钢材预处理 表面清洁度的目视评定 第2部分:局部去除原有涂层后钢材的除锈等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
|
| ISO 8501-3-2006
| 涂装油漆和有关产品前钢材的预处理.表面清洁度的目视评定.第3部分:焊接、切边及其它表面缺陷区域的处理等级
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections
|
| ISO 8502-11-2006
| 涂装油漆和有关产品前钢材预处理.表面清洁度的评定试验.第11部分:水溶性硫酸盐浊度测定的现场方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble sulfate
|
| ISO 8502-12-2003
| 使用涂料和相关产品之前钢基质的制备.表面清洁度评定试验.第12部分:滴定测定水溶铁离子的现场试验方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrrous ions
|
| ISO 8502-2-2005
| 涂覆油漆和相关产品前钢材衬底的预处理.表面清洁度的评定试验.第2部分:洁净表面氯化物的测定
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces
|
| ISO 8502-3-1992
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第3部分:油漆前预处理后的钢材表面上的灰尘评定(压
| Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 3: assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
|
| ISO 8502-4-1993
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第4部分:油覆前凝露可能性的评定导则
| Preparation of steel substrates before application of paint and related products; tests for the assessment of surface cleanliness; part 4: Guidance on the estimation of the probability of condensation prior to paint application
|
| ISO 8502-5-1998
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第5部分:涂装前钢材表面上氯化物测定(离子探测管法)
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)
|
| ISO 8502-6-2006
| 油漆和相关产品用前钢材的预处理.表面清洁度的评定试验.第6部分:提取分析用可溶性杂质.Bresle法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method
|
| ISO 8502-8-2001
| 涂装油漆和有关产品前钢材的预处理 表面清洁度评定试验 第8部分：现场水分折射测定方法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric determination of moisture
|
| ISO 8502-9-1998
| 涂装油漆和有关产品前钢材预处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导测定法
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts
|
| ISO 8503-1-1988
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第1部分:磨料喷射清理表面粗糙度的ISO评定
| Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 1: specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
|
| ISO 8503-2-1988
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第2部分:磨料喷射清理表面的粗糙度定级方法
| Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 2: method for the grading of surface profile of abrasive blast-cleaned steel; comparator procedure
|
| ISO 8503-3-1988
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第3部分:ISO表面轮廓比较仪的校准方法和表
| Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 3: method for the calibration of ISO surface profile comparators and for the determination of surface profile; focusing microscope procedure |
| ISO 8503-4-1988
| 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 第4部分:ISO表面轮廓比较仪的校准方法和表
| Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surface profile; stylus instrument procedure
|
| ISO 8503-5-2003
| 涂装油漆和有关产品前钢材预处理.喷射清理钢材的表面粗糙度特性.第5部分:表面轮廓测定的复制带法
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile
|
| ISO 8504-1-2000
| 涂装油漆和有关产品前钢材预处理 表面预处理方法 第1部分:总则
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles
|
| ISO 8504-2-2000
| 涂装油漆和有关产品前钢材预处理.表面预处理方法.第2部分:磨料喷射清理
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning
|
| ISO 8504-3-1993
| 涂装油漆和有关产品前钢材预处理 表面预处理方法 第3部分:手工和动力工具清洗
| Preparation of steel substrates before application of paints and related products; surface preparation methods; part 3: hand- and power-tool cleaning
|
| ISO 9587-1999
| 金属和其他无机覆盖层 钢铁为减少氢脆危险的预处理
| Metallic and other inorganic coatings - Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
|
| ISO/TR 10949-2002
| 液压传动.元件清洁度.从生产到安装的过程中元件清洁度的取得和控制指南
| Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacture to installation
|
| ISO/TR 15235-2001
| 涂装油漆和有关产品前钢材的预处理 收集的有关溶水盐污染水平的影响的信息
| Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
|
| ISO/TS 16431-2002
| 液压传动.配件系统.清洁度的鉴定
| Hydraulic fluid power - Assembled systems - Verification of cleanliness
|
| 编号 | 中文名称 | 英文名称 |
|---|