| 编号 | 中文名称 | 英文名称 |
|---|
| FZ/T 90074-2004
| 纺织机械产品涂装
| ()
|
| FZ/T 91007-2004
| 纺织机械产品涂装工艺
| ()
|
| GB 12367-2006
| 涂装作业安全规程静电喷漆工艺安全
| Safety code for painting - Safety for electrostatic spray painting process
|
| GB 12942-2006
| 涂装作业安全规程有限空间作业安全技术要求
| Safety code for painting - Technical requirements of safety for working in confined spaces
|
| GB 14443-1993
| 涂装作业安全规程涂层烘干室安全技术规定
| Safety code for painting--Safety rules for paint drying oven
|
| GB 14443-2007
| 涂装作业安全规程 涂层烘干室安全技术规定
| ()
|
| GB 14444-2006
| 涂装作业安全规程喷漆室安全技术规定
| Safety code for painting - Safety rules for spraying booth
|
| GB 14773-1993
| 涂装作业安全规程静电喷枪及其辅助装置安全技术条件
| Safety code for painting--Safety specification for electrostatic spray guns and associated apparatus
|
| GB 14773-2007
| 涂装作业安全规程 静电喷枪及其辅助装置安全技术条件
| ()
|
| GB 15607-1995
| 涂装作业安全规程粉末静电喷涂工艺安全
| Safety code for painting--Safety for electrostatic powder spraying process
|
| GB 17750-1999
| 涂装作业安全规程浸涂工艺安全
| Safety code for painting--Safety for dipping process
|
| GB 20101-2006
| 涂装作业安全规程 有机废气净化装置安全技术规定
| Safety code for painting - Safety rules for purification equipment of exhaust organic gas
|
| GB 6514-1995
| 涂装作业安全规程涂漆工艺安全及其通风净化
| Safety code for painting--Safety，ventilation and air clean-up for painting process
|
| GB 7691-2003
| 涂装作业安全规程安全管理通则
| Safety code for painting--Safety management general rule
|
| GB 7692-1999
| 涂装作业安全规程涂漆前处理工艺安全及其通风净化
| Safety code for painting--Safety，ventilation and air clean-up for pretreatment process of painting
|
| GB/T 11373-1989
| 热喷涂金属件表面预处理通则
| The general principle of surface preparation of metallic substrate for thermal spraying
|
| GB/T 13288-1991
| 涂装前钢材表面粗糙度等级的评定 (比较样块法)
| The assessment of profile grades of steel surface before application of paint and related products--Comparator
|
| GB/T 14441-1993
| 涂装作业安全规程术语
| Safety code for painting--Terminology
|
| GB/T 18178-2000
| 水性涂料涂装体系选择通则
| General rules of the selection for painting system of water paint
|
| GB/T 18570.10-2005
| 涂覆涂料前钢材表面处理表面清洁度的评定试验第10部分：水溶性氯化物的现场滴定测定法
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride
|
| GB/T 18570.2-2001
| 涂覆涂料前钢材表面处理表面清洁度的评定试验清理过的表面上氯化物的实验室测定
| Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Laboratory determination of chloride on cleaned surfaces
|
| GB/T 18570.3-2005
| 涂覆涂料前钢材表面处理表面清洁度的评定试验第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法)
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method)
|
| GB/T 18570.4-2001
| 涂覆涂料前钢材表面处理表面清洁度的评定试验涂覆涂料前凝露可能性的评定导则
| Preparation of steel substrates before application of paints and related products--Tests for the assessment of surface cleanliness--Guidance on the estimation of the probability of condensation prior to paint application
|
| GB/T 18570.5-2005
| 涂覆涂料前钢材表面处理表面清洁度的评定试验第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法)
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method)
|
| GB/T 18570.6-2005
| 涂覆涂料前钢材表面处理表面清洁度的评定试验第6部分：可溶性杂质的取样 Bresle法
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 6:Extraction of soluble contaminants for analysis-The Bresle method
|
| GB/T 18570.8-2005
| 涂覆涂料前钢材表面处理表面清洁度的评定试验第8部分：湿气的现场折射测定法
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture
|
| GB/T 18570.9-2005
| 涂覆涂料前钢材表面处理表面清洁度的评定试验第9部分：水溶性盐的现场电导率测定法
| Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts
|
| GB/T 18593-2001
| 熔融结合环氧粉末涂料的防腐蚀涂装
| Anti-corrosive painting of fusion bonded epoxy coating powders
|
| GB/T 19349-2003
| 金属和其他无机覆盖层为减少氢脆危险的钢铁预处理
| Metallic and other inorganic coatings--Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement
|
| GB/T 20110-2006
| 液压传动零件和元件的清洁度与污染物的收集、分析和数据报告相关的检验文件和准则
| Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection,analysis and data reporting
|
| GB/T 20217-2006
| 保证氧用工业过程测量和控制装置清洁度的程序
| Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service
|
| GB/T 2951.9-1997
| 电缆绝缘和护套材料通用试验方法第4部分:聚乙烯和聚丙烯混合料专用试验方法第2节:预处理后断裂伸长率试验--
| Common test methods for insulating and sheathing materials of electric cables--Part 4:Methods specific to polyethylene and polypropylene compounds--Section two:Elongation at break after pre-conditioning--Wrapping test after pre-conditioning--Wrapping tes
|
| GB/T 3821-2005
| 中小功率内燃机清洁度测定方法
| Small and medium power internal combustion engines-Cleanliness measurement
|
| GB/T 5476-1996
| 离子交换树脂预处理方法
| Methods for pretreating ion exchange resins
|
| GB/T 6807-2001
| 钢铁工件涂装前磷化处理技术条件
| Specifications for phosphating treatment of iron and steel parts before painting
|
| GB/T 8264-1987
| 涂装技术术语
| Glossary of painting terms
|
| GB/T 8923-1988
| 涂装前钢材表面锈蚀等级和除锈等级
| Rust grades and preparation grades ofsteel surfaces before application of paints and related products
|
| GB/Z 19848-2005
| 液压元件从制造到安装达到和控制清洁度的指南
| Hydraulic fluid power-Component cleanliness-Guidelines for achieving and controlling cleanliness of components from manufacture to installation
|
| GB/Z 20423-2006
| 液压系统总成清洁度检验
| Hydraulic fluid power―Assembled systems―Verification of cleanliness
|
| HG/T 20587-1996
| 化工建筑涂装设计规定
| ()
|
| JB/T 10151-1999
| 普通磨料 清洁度的测定
| ()
|
| JB/T 10223-2001
| 工程机械液力变矩器清洁度 检测方法及指标
| ()
|
| JB/T 10240-2001
| 静电粉末涂装设备
| ()
|
| JB/T 10242-2001
| 阴极电泳涂装通用技术条件
| ()
|
| JB/T 10394.1-2002
| 涂装设备通用技术条件 第1部分：钣金件
| ()
|
| JB/T 10394.2-2002
| 涂装设备通用技术条件 第2部分：焊接件
| ()
|
| JB/T 10394.3-2002
| 涂装设备通用技术条件 第3部分：涂层
| ()
|
| JB/T 10394.4-2002
| 涂装设备通用技术条件 第4部分：安装
| ()
|
| JB/T 10536-2005
| 涂装供漆系统 技术条件
| ()
|
| JB/T 10560-2006
| 滚动轴承 防锈油、清洗剂 清洁度及评定方法
| ()
|
| JB/T 4041-1994
| 凿岩机械与气动工具 产品清洁度 通用检测方法
| ()
|
| JB/T 4058-1999
| 汽轮机清洁度
| ()
|
| JB/T 5000.12-2007
| 重型机械通用技术条件 第12部分：涂装
| Heavy mechanical general techniques and standards-Part 12:Paint
|
| JB/T 5243-2005
| 收获机械传动箱 清洁度测定方法
| ()
|
| JB/T 5288.2-1991
| 摆线针轮减速机 清洁度测定方法
| ()
|
| JB/T 5365.1-1991
| 铸造机械清洁度测定方法 重量法
| ()
|
| JB/T 5365.2-1991
| 铸造机械清洁度测定方法 显微镜法
| ()
|
| JB/T 5946-1991
| 工程机械 涂装通用技术条件
| ()
|
| JB/T 6002-2007
| 涡轮增压器 清洁度限值及测定方法
| Turbochargers-Limit values and measurement methods for cleanliness
|
| JB/T 6418-1992
| 分离机械 清洁度测定方法
| ()
|
| JB/T 6886-1993
| 通风机 涂装技术条件
| ()
|
| JB/T 6896-2007
| 空气分离设备表面清洁度
| ()
|
| JB/T 6913-1993
| 泵产品清洁度
| ()
|
| JB/T 6978-1993
| 涂装前表面准备 酸洗
| ()
|
| JB/T 7050-2005
| 滚动轴承 清洁度评定方法
| ()
|
| JB/T 7157-1993
| 工程机械 燃油箱清洁度测定方法
| ()
|
| JB/T 7158-1993
| 工程机械 零部件清洁度测定方法
| ()
|
| JB/T 7217-1994
| 分离机械 涂装通用技术条件
| ()
|
| JB/T 7455-2007
| 机床涂装用不饱和聚酯腻子
| Unsaturated polyester putty for decorating of machine tool
|
| JB/T 7504-1994
| 静电喷涂装备 技术条件
| ()
|
| JB/T 7661-2004
| 柴油机油泵油嘴产品清洁度 限值及测定方法
| ()
|
| JB/T 7663.2-2007
| 容积式压缩机 涂装技术条件
| Coating specifications for displacement compressors
|
| JB/T 7858-2006
| 液压元件清洁度评定方法及液压元件清洁度指标
| Method to determine cleanliness and acceptance criterions for hydraulic components
|
| JB/T 7929-1999
| 齿轮传动装置清洁度
| ()
|
| JB/T 9058-1999
| 制冷设备清洁度测定方法
| ()
|
| JB/T 9062-1999
| 采暖通风与空气调节设备涂装技术条件
| ()
|
| JB/T 9591.1-1999
| 燃气轮机 油系统清洁度
| ()
|
| JB/T 9591.2-1999
| 燃气轮机 油系统清洁度测试取样
| ()
|
| JB/T 9591.3-1999
| 燃气轮机 油系统清洁度测试用显微镜计数法测定油液中固体颗粒污染度
| ()
|
| JB/T 9774-2005
| 中小功率内燃机 清洁度限值
| ()
|
| JB/T 9877-1999
| 金属切削机床 清洁度的测定
| ()
|
| JB/T 9954-1999
| 锻压机械液压系统 清洁度
| ()
|
| QB/T 1896-1993
| 自行车粉末涂装技术条件
| ()
|
| QB/T 2183-1995
| 自行车电泳涂装技术条件
| ()
|
| QB/T 2528-2001
| 缝纫机涂装技术条件
| ()
|
| QC/T 512-1999(2005)
| 汽车柴油机用喷油泵及喷油器清洁度测定方法及限值
| ()
|
| QC/T 546-1999(2005)
| 汽车筒式减振器 清洁度限值及测定方法
| ()
|
| QC/T 571-1999(2005)
| 汽车清洁度工作导则 名词、术语
| ()
|
| QC/T 572-1999(2005)
| 汽车清洁度工作导则 测定方法
| ()
|
| QC/T 573-1999(2005)
| 汽车清洁度工作导则 人、物和环境
| ()
|
| QC/T 574-1999(2005)
| 汽车清洁度工作导则 抽样规则
| ()
|
| QC/T 575-1999(2005)
| 汽车清洁度工作导则 杂质的分析方法
| ()
|
| QC/T 683-2002
| 摩托车和轻便摩托车发动机清洁度限值及测量方法
| ()
|
| SY/T 0407-1997
| 涂装前钢材表面预处理规范
| ()
|
| SY/T 0407-1997(2005)
| 涂装前钢材表面预处理规范
| ()
|
| YB/T 036.19-1992(2005)
| 冶金设备制造通用技术条件 涂装
| ()
|
| YB/T 164-1999
| 铁水预处理用Al2O3-SiC-C砖
| ()
|
| YB/T 3220.11-1987(2005)
| 宝钢二高炉设备制造通用技术条件 涂装
| ()
|
| YB/T 9256-1996
| 钢结构、管道涂装工程技术规范
| ()
|
| YS/T 450-2002
| 冰箱用高清洁度铜管
| ()
|
| 编号 | 中文名称 | 英文名称 |
|---|