| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BIP 2113-2007 | 标准合格性检验.厂商及其客户的实用指南 | Demonstration of conformity to a standard - A practical guide for suppliers and their customers |
| BS 3553-1992 | 选煤厂流程图的图形符号规范 | Specification for graphical symbols for coal preparation plant flowsheets |
| BS 3567-1985 | 选煤厂设计流程图绘制惯例规程 | Code of practice for preparation of flowsheets for the design of coal preparation plant |
| BS 5163-1-2004 | 水厂用阀.主要键操作的铸铁闸阀.操作规范 | Valves for waterworks purposes - Predominantly key-operated cast iron gate valves - Code of practice |
| BS 5163-2-2004 | 水厂用阀.隔离阀和相关控水设备用船首柱冠板.规范 | Valves for waterworks purposes - Stem caps for use on isolating valves and associated water control apparatus - Specification |
| BS 5305-1984 | 乳品工业工厂与设备的清洁和消毒实用规程 | Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry |
| BS 5834-1-1985 | 燃气和给水厂用地面控制器和防护器及地下室.第1部分:包括基本构件的防护装置规范 | Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for guards, including foundation units |
| BS 5834-2-1983 | 燃气和给水厂用地面控制器和防护器及地下室.第2部分:小型地面控制器规范 | Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for small surface boxes |
| BS 5834-3-1985 | 燃气和给水厂用地面控制器和防护器及地下室.第3部分:大型地面控制器规范 | Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for large surface boxes |
| BS 5834-4-1989 | 燃气和给水厂用地面控制器和防护器及地下室.第4部分:预制室规范 | Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification for preformed chambers |
| BS 5930-1999 | 厂址调查实施规范 | Code of practice for site investigations |
| BS 6001-7-2006 | 计数检验用验收抽样程序.基于控制出厂质量用的信用原则的验收零抽样系统 | Acceptance sampling procedures for inspection by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality |
| BS 6001-9-2002 | 计数取样检验程序.分批检验时控制出厂质量的以信任为基础的零抽样验收计划 | Sampling procedures for inspection by attributes - Double sampling plans using minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) |
| BS 6068-6.7-1994 | 水质量.第6部分:取样.第7节:锅炉厂水和蒸气取样导则 | Water quality - Sampling - Guidance on sampling of water and steam in boiler plants |
| BS 6069-4.2-1991 | 空气质量的表征方法.第4部分:固定废物排放源.第2节:石棉厂排放废物中纤维支数含量测定方法 | Characterization of air quality - Stationary source emissions - Method for the determination of asbestos plant emissions by fibre count measurement |
| BS 6076-1996 | 地下铁管和配件保护套用聚乙烯薄膜规范(现场和工厂用) | Specification for polymeric film for use as a protective sleeving for buried iron pipes and fittings (for site and factory application) |
| BS 6100-1.5.5-1991 | 建筑和土木工程术语.第1部分:通用和杂项.第5集:操作:相关工厂和设备.第5分集:工厂和设备 | Glossary of building and civil engineering terms - General and miscellaneous - Operations - Associated plant and equipment - Plant and equipment |
| BS 644-2003 | 木窗.工厂组装的各种类型窗.规范 | Timber windows - Factory assembled windows of various types - Specification |
| BS 6464-1984 | 制炼厂用增强塑料管、配件和接头规范 | Specification for reinforced plastics pipes, fittings and joints for process plants |
| BS 7067-1990 | 原煤和来自选煤厂产品的浮起和沉没特性的测定和表述指南 | Guide to determination and presentation of float and sink characteristics of raw coal and of products from coal preparation plants |
| BS 7159-1989 | 特殊工厂或工地用玻璃纤维增强塑料管道系统的设计和建造实用规程 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| BS 7488-1991 | 灌装厂、仓库和零售处搬运装有碳酸软饮料或苏打水推荐标准 | Recommendations for handling glass bottles, containing carbonated soft drinks or carbonated water, in filling plants, warehouses, and retailers' premises |
| BS 7566-1-1992 | 工厂按BS 4543标准制造的家用烟囱的安装.第1部分:规定安装设计资料的方法 | Installation of factory-made chimneys to BS 4543 for domestic appliances - Method of specifying installation design information |
| BS 7566-2-1992 | 工厂按BS 4543标准制造的家用烟囱的安装.第2部分:安装设计规范 | Installation of factory-made chimneys to BS 4543 for domestic appliances - Specification for installation design |
| BS 7566-3-1992 | 工厂按BS 4543标准制造的家用烟囱的安装.第3部分:现场安装规范 | Installation of factory-made chimneys to BS 4543 for domestic appliances - Specification for site installation |
| BS 7566-4-1992 | 工厂按BS 4543标准制造的家用烟囱的安装.第4部分:安装结构和安装的推荐标准 | Installation of factory-made chimneys to BS 4543 for domestic appliances - Recommendations for installation design and installation |
| BS 7771-1994 | 农场和小型乳制品厂牛奶的巴氏杀菌法实用规程 | Code of practice for pasteurization of milk on farms and in small dairies |
| BS EN 100114-6-1997 | 程序规则.质量评定程序.第6部分:电子元器件生产厂家的技术批准 | CECC Quality assessment procedure for electronic components - Technology approval of electronic component manufacturers |
| BS EN 10107-2005 | 加工完毕出厂的颗粒取向的电工钢片和钢带 | Grain-oriented electrical steel sheet and strip delivered in the fully processed state |
| BS EN 1041-1998 | 由厂商提供的医疗设备信息 | Information supplied by the manufacturer with medical devices |
| BS EN 1169-1999 | 预制混凝土制品.玻璃纤维增强水泥的工厂生产控制的一般规则 | Precast concrete products - General rules for factory production control of glass-fibre reinforced cement |
| BS EN 12255-1-2002 | 污水处理工厂.一般建造原则 | Wastewater treatment plants - General construction principles |
| BS EN 12255-10-2001 | 水处理工厂.安全规则 | Wastewater treatment plants - Saftey principles |
| BS EN 12255-11-2001 | 污水处理厂.要求的一般数据 | Wastewater treatment plants - General data required |
| BS EN 12255-12-2003 | 废水处理厂.控制和自动化 | Wastewater treatment plants - Control and automation |
| BS EN 12255-13-2003 | 废水处理厂.化学处理.通过沉淀作用/絮凝作用处理废水 | Wastewater treatment plants - Chemical treatment - Treatment of wastewater by precipitation/flocculation |
| BS EN 12255-15-2003 | 污水处理厂.活性污泥处理厂曝气池清水中充氧量的测量 | Wastewater treatment plants - Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants |
| BS EN 12255-16-2005 | 污水处理厂.物理（机械）过滤法 | Wastewater treatment plants - Part 16: Physical (mechanical) filtration |
| BS EN 12255-3-2000 | 污水处理厂.预处理 | Wastewater treatment plants - Preliminary treatment |
| BS EN 12255-4-2002 | 污水处理厂.初次澄清 | Wastewater treatment plants - Primary settlement |
| BS EN 12255-5-1999 | 废水处理厂.污泥处理法 | Wastewater treatment plants - Lagooning processes |
| BS EN 12255-6-2002 | 污水处理厂.活性污泥处理法 | Wastewater treatment plants - Activated sludge processes |
| BS EN 12255-7-2002 | 污水处理厂.生物固定薄膜反应器 | Wastewater treatment plants - Biological fixed-film reactors |
| BS EN 12255-9-2002 | 污水处理厂.气味控制和通风 | Wastewater treatment plants - Odour control and ventilation |
| BS EN 12285-1-2003 | 工厂制造的钢罐.易燃和不易燃的水污染液体地下储存用卧式圆柱形单层和双层钢罐 | Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| BS EN 12285-2-2005 | 工厂制造的钢罐.易燃和非易燃水污染液体的地上储存用卧式圆柱形单层和双层钢罐 | Workshop fabricated steel tanks - Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids |
| BS EN 1279-6-2002 | 建筑物用玻璃.隔热玻璃装置.工厂生产控制和定期试验 | Glass in building - Insulating glass units - Factory production control and periodic tests |
| BS EN 12873-1-2003 | 材料对人类用水的影响.由迁移造成的影响.工厂制造的非金属无粘性产品的试验方法 | Influence of materials on water intended for human consumption - Influence due to migration - Test method for non-metallic and non-cementitious factory made products |
| BS EN 12966-3-2005 | 道路垂直标志.可变信息交通标志.工厂生产控制 | Road vertical signs - Variable message traffic signs - Factory production control |
| BS EN 12976-1-2006 | 太阳能系统和部件.工厂制造系统.一般要求 | Thermal solar systems and components - Factory made systems - General requirements |
| BS EN 12976-2-2006 | 太阳能系统部件.工厂制造系统.试验方法 | Thermal solar systems components - Factory made systems - Test methods |
| BS EN 13108-21-2006 | 沥青混合物.材料规范.工厂生产控制 | Bituminous mixtures - Material specifications - Factory production control |
| BS EN 13162-2001 | 建筑物的热绝缘产品.工厂制的矿棉产品.规范 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| BS EN 13163-2001 | 建筑物的热绝缘产品.工厂制的膨胀聚苯乙烯产品.规范 | Thermal insulation products for buildings - Factory made products of expanded polystyrene - Specification |
| BS EN 13164-2001 | 建筑物的热绝缘产品.工厂制的聚苯乙烯泡沫产品.规范 | Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification |
| BS EN 13165-2001 | 建筑物的热绝缘产品.工厂制的硬质聚氨基甲酸乙酯泡沫产品.规范 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification |
| BS EN 13166-2001 | 建筑物的热绝缘产品.工厂制的酚醛泡沫产品.规范 | Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification |
| BS EN 13167-2001 | 建筑物的热绝缘产品.工厂制泡沫玻璃产品.规范 | Thermnal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
| BS EN 13168-2001 | 建筑物的热绝缘产品.工厂制的木丝产品.规范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
| BS EN 13169-2001 | 建筑物的热绝缘产品.工厂制的膨胀珍珠岩产品.规范 | Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification |
| BS EN 13170-2001 | 建筑物的热绝缘产品.工厂制的膨胀软木产品.规范 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| BS EN 13171-2001 | 建筑物的热绝缘产品.工厂制的木纤维产品.规范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| BS EN 13212-2001 | 道路标记材料.工厂生产控制要求 | Road marking materials - Requirements for factory production control |
| BS EN 13215-2000 | 制冷用冷凝装置.规定条件、公差和厂商性能数据的表示 | Condensing units for refrigeration - Rating conditions, tolerances and presentation of manufacturer's performance data |
| BS EN 13454-1-2004 | 硫酸钙基地板找平层用粘合剂、合成粘合剂和工厂制混合物.定义和要求 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Definitions and requirements |
| BS EN 13454-2-2004 | 基于硫酸钙的地板找平层用粘合剂、复合粘合剂和工厂制混合物.试验方法 | Binders, composite binders and factory made mixtures or floor screeds based on calcium sulfate - Test methods |
| BS EN 14081-3-2005 | 木材结构.带矩形截面的强度分级结构木材.第3部分:机械分级.工厂生产控制的附加要求 | Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control |
| BS EN 14509-2006 | 自持式双面金属装饰的绝热-隔声板.工厂制作产品.规范 | Self-supporting double skin metal faced insulating panels -Factory made products - Specifications |
| BS EN 14587-1-2007 | 铁路设施.轨道.钢轨的闪光对接焊.固定厂房中新的R220、R260、R260Mn和R350HT级钢轨 | Railway applications - Track - Flash butt welding of rails - New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| BS EN 14650-2005 | 预浇铸混凝土产品.金属纤维混凝土工厂生产控制的一般规则 | Precast concrete products - General rules for factory production control of metallic fibered concrete |
| BS EN 14733-2005 | 沥青和沥青粘合剂.沥青乳剂、软质沥青和轻质沥青工厂生产控制 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control |
| BS EN 14933-2007 | 土木工程用隔热和轻质填装制品.工厂制膨胀聚苯乙烯(EPS)产品.规范 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification |
| BS EN 14944-1-2006 | 人消费的水中水泥产品的影响.试验方法.感官参数对水泥产品生产厂的影响 | Influence of cementitious products on water intended for human consumption - Test methods - Influence of factory made cementitious products on organoleptic parameters |
| BS EN 15159-1-2006 | 釉瓷和搪瓷.加工厂用玻璃衬垫器具.仪器、部件、器具和附件的质量要求 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Quality requirements for apparatus, components, appliances and accessories |
| BS EN 15159-2-2006 | 釉瓷和搪瓷.加工厂用玻璃衬垫器具.防化学腐蚀和抗热冲击的设计和规范 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Designation and specification of resistance to chemical attack and thermal shock |
| BS EN 15159-3-2006 | 釉瓷和搪瓷.加工厂用玻璃衬垫器具.抗热冲击 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Thermal shock resistance |
| BS EN 160100-1998 | 电子元器件质量评定协调体系.分规范:经过质量评定的印制电路板组件制造厂的能力鉴定 | Harmonized system of quality assessment for electronic components - Sectional specification: capability approval of manufacturers of printed board assemblies of assessed quality |
| BS EN 1620-1997 | 生物技术.大规模加工和生产.根据危害程度建造的工厂建筑物 | Biotechnology - Large-scale process and production - Plant building according to the degree of hazard |
| BS EN 326-2-2000 | 木基板.抽样、切削和检验.工厂中的质量控制 | Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory |
| BS EN 45510-4-5-2002 | 发电站设备的购置指南.锅炉附属设备.煤的搬运和散货堆放厂 | Guide for the procurement of power station equipment - Boiler auxiliaries - Coal handling and bulk storage plant |
| BS EN 60401-3-2004 | 磁性软铁氧体制磁芯的术语和命名.写入变压器和电感器磁芯制造厂产品目录中的数据格式指南 | Terms and nomenclature for cores made of magnetically soft ferrites - Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores |
| BS EN 61000-2-4-2002 | 电磁兼容性(EMC).环境.低频干扰的工业厂房的电磁兼容等级 | Electromagnetic compatibility (EMC) - Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
| BS EN 61181-2007 | 填充矿物油的电气设备.溶解气体分析(DGA)用于电气设备工厂试验 | Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
| BS EN 61355-1997 | 工厂、系统和设备用文献的分类和命名 | Classification and designation of documents for plants, systems and equipment |
| BS EN 61400-25-1-2007 | 风力涡轮机.风力电厂监控用通信设备.原理和模型总描述 | Wind turbines - Communications for monitoring and control of wind power plants - Overall description of principles and models |
| BS EN 61400-25-2-2007 | 风力涡轮机.风力电厂监控用通信设备.信息模式 | Wind turbines - Communications for monitoring and control of wind power plants - Information models |
| BS EN 61400-25-3-2007 | 风力涡轮机.风力电厂监控用通信设备.信息交换模式 | Wind turbines - Communications for monitoring and control of wind power plants - Information exchange models |
| BS EN 61400-25-5-2007 | 风力涡轮机.风力电厂监控用通信设备.一致性测试 | Wind turbines - Communications for monitoring and control of wind power plants - Conformance testing |
| BS EN 61660-1-1997 | 发电厂和变电所直流辅助设备短路电流.第1部分:短路电流计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Calculation of short-circuit currents |
| BS EN 61660-2-1997 | 发电厂和变电所直流辅助设备短路电流.第2部分:结果计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Calculation of effects |
| BS EN 62381-2007 | 加工工业中的自动化系统.工厂验收试验(FAT)、现场验收试验(SAT)和现场集成试验(SIT) | Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) |
| BS EN ISO 11126-3-1994 | 涂料和其他相关产品应用前钢基体的预处理. 喷非金属清理磨料规范.铜精炼厂炉渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Copper refinery slag |
| BS EN ISO 11126-5-1994 | 涂料和其他相关产品应用前钢基体的预处理.非金属喷砂清理磨料规范.镍精练厂矿渣 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Nickel refinery slag |
| BS EN ISO 13705-2006 | 石油、石化和天然气工业.一般精炼厂用火加热器 | Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service |
| BS EN ISO 17652-1-2003 | 焊接.有关焊接和相关工艺的工厂底漆的试验.一般要求 | Welding - Test for shop primers in relation to welding and allied processes - General requirements |
| BS EN ISO 17652-2-2003 | 焊接.有关焊接和相关工艺有关的工厂底漆的试验.工厂底漆的焊接特性 | Welding - Test for shop primers in relation to welding and allied processes - Welding properties of shop primers |
| BS EN ISO 17652-3-2003 | 焊接.有关焊接和相关工艺有关的工厂底漆的试验.热切割 | Welding - Test for shop primers in relation to welding and allied processes - Thermal cutting |
| BS EN ISO 17652-4-2003 | 焊接.有关焊接和相关工艺有关的工厂底漆的试验.烟气排放 | Welding - Test for shop primers in relation to welding and allied processes - Emission of fumes and gases |
| BS EN ISO 5667-13-1998 | 水质.采样.第13部分:生活污水和水处理厂的污泥采样指南 | Water quality - Sampling - Guidance on sampling of sludges from sewage and water treatment works |
| BS IEC 1000-2-6-1996 | 电磁兼容性.第2部分:环境.第6节:关于低频传导干扰的工业厂房电源辐射电平的评估 | Electromagnetic compatibility (EMC) - Environment - Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
| BS IEC 60880-2006 | 核电厂.设备和控制的安全重要性.表现A类功能的基于计算机系统的软件情况 | Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions |
| BS IEC 61225-2006 | 核电厂.安全重要仪表和控制系统.供电要求 | Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies |
| BS IEC 61504-2000 | 核电站.对安全致关重要的测试设备和控制系统.对整个工厂范围的辐射监测 | Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring |
| BS IEC 61513-2001 | 核电厂.以安全为主的系统用仪器仪表和控制.系统的一般要求 | Nuclear power plants - Instrumentation and control for systems important to safety - General requirements for systems |
| BS IEC 61888-2003 | 核电厂.有关安全的仪器仪表.事故保护定值器的测定和维护 | Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints |
| BS IEC/TR 61838-2001 | 核动力工厂.检测设备和控制功能分级用概率安全评估的使用 | Nuclear power plants - Use of probabilistic safety asessment for the classification of instrumentation and control functions |
| BS ISO 10816-5-2001 | 机械振动.在非旋转部件上测量评价机械振动.水力发电厂和泵站机组 | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Machine sets in hydraulic power and pumping plants |
| BS ISO 12222-2001 | 电影摄影.在16mm、35mm和65mm电影胶片上厂家印制的潜影标记.规范和尺寸 | Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm & 65 mm film - Specifications and dimensions |
| BS ISO 13704-2002 | 石油和天然气工业.炼油厂中加热器管厚度的校准 | Petroleum and natural gas industries - Calculation of heater-tube thickness in petroleum refineries |
| BS ISO 21238-2007 | 核能.核燃料技术.测定核电厂产生的低级和中级放射性废物包放射性的换算因子法 | Nuclear energy - Nuclear fuel technology - Scaling factor method to determine the radioactivity of low and intermediate-level radioactive waste packages generated at nuclear power plants |
| BS ISO 6974-2-2001 | 天然气.用气相色谱法测定规定的不确定度的组分.测量系统特性和数据处理的稳定性用定性和统计巡饬肯低厂 | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Measuring-system characteristics and statistics for processing of data |
| BS ISO 7919-5-2005 | 机械振动.通过对旋转轴的测量评价机械振动.水力发电厂和泵站机组 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Machine sets in hydraulic power generating and pumping plants |
| BS ISO 8086-2004 | 乳品厂.卫生条件.检验和取样程序通用指南 | Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures |
| BS ISO 8297-1995 | 声学.声压级环境评估用多源工厂噪声强度测定.工程法 | Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method |
| PD 6584-1995 | 厂商质量保证评定用调查表格式 | Model for a supplier quality assurance assessment questionnaire |
| 编号 | 中文名称 | 英文名称 |