| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 1298-1978 | 热力厂用连接件.金属薄板制制的废气管和废气弯管 | Connection parts for heating plants; flue gas tubes, flue gas tube knees and flue gas tube bends from metal sheet |
| DIN 15055-1982 | 炼钢厂、轧钢机和起重机.用油压的过盈配合.用途、尺寸、结构 | Steelworks, rolling mills and cranes; interference fits using oil under pressure; application, dimensions, design |
| DIN 15141-4-1985 | 运输链.托盘.四通木制周边座托盘.1000 mm X 1200 mm.酿造厂托盘 | Transportation chain; pallets; four way timber perimeter-base pallets; 1000 mm 1200 mm; brewery pallets |
| DIN 19551-1-2002 | 废水处理厂.矩形储罐.第1部分:带污泥铲运机、吸入式污泥清除器和链式铲运机的沉淀储罐.设备型号和主要尺寸 | Wastewater treatment plants - Rectangular tanks - Part 1: Settlement tanks with sludge scraper, suction type sludge remover and chain scraper; Types, main dimensions, equipments |
| DIN 19551-3-2002 | 废水处理厂.矩形储罐.第3部分:吸入式污泥清除器和污泥铲运机的砾砂储罐.设备型号和主要尺寸 | Wastewater treatment plants - Rectangular tanks - Part 3: Grit chambers with suction type sludge remover and sludge scraper; Types, main dimensions, equipment |
| DIN 19552-2002 | 废水处理厂.圆形储罐.带污泥铲运机、吸入式污泥清除器和增稠器的沉淀储罐.设备型号和主要尺寸 | Wastewater treatment plants - Circular tanks - Settlement tanks with sludge scraper, suction type sludge remover and thickener; Types, main dimensions, equipment |
| DIN 19553-2002 | 废水处理厂.旋转式分配器的滴滤器.主要尺寸和设备 | Wastewater treatment plants - Trickling filter with rotary distributor - Main dimensions and equipment |
| DIN 19554-2002 | 废水处理厂.以直杆式筛网作为电流和逆电流筛网的筛分设备.设备主要尺寸 | Wastewater treatment plants - Screening plant with straight bar screens as current and counter current screen - Main dimensions, equipment |
| DIN 19557-2004 | 废水处理厂.渗滤器用矿物和塑料过滤介质.要求、检验、供货和安置 | Wastewater treatment plants - Mineral filter media and plastic media for percolating filters - Requirements, testing, delivery, placing |
| DIN 19558-2002 | 废水处理厂.储罐出口装置、溢水口、浮渣档板和浸没式排水管道.建造原则、主要尺寸和布局 | Wastewater treatment plants - Outlet installations, weir and scum baffle, submerged effluent pipes in tanks - Construction principles, main dimensions, layout |
| DIN 19569-10-2001 | 污水处理厂.结构和技术设备设计原理.第10部分:热污泥干燥设备特定原理 | Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 10: Specific principles for the equipment for thermal sludge drying |
| DIN 19569-11-2004 | 污水处理厂.结构和技术设备设计原理.第11部分:间歇操作装置 | Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 11: Dosing plant |
| DIN 19569-2-2002 | 废水处理厂.构件和技术装备的设计原则.第2部分:固体分离和浓缩设备的特殊原则 | Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 2: Specific principles for the equipment for separating and thickening of solids |
| DIN 19569-3-2002 | 废水处理厂.构件和技术装备的设计原则.第3部分:含氧生物废水处理设备的特殊原则 | Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 3: Specific principles for the equipment for aerobical biological wastewater treatment |
| DIN 19569-4-2000 | 废水处理厂.结构设计原则和技术设备.第4部分:水闸、泄水闸门、叠梁闸门等截水设备的特殊原则 | Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 4: Specific principles for shutoff devices as penstocks, sluice gates, stoplogs etc. |
| DIN 19569-5-2002 | 废水处理厂.构件和技术装备的设计原则.第5部分:厌氧废水处理厂的特殊原则 | Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 5: Specific principles for plants for anaerobic wastewater treatment |
| DIN 19569-7-1999 | 污水处理厂.建筑结构和技术设备的设计原理.第7部分:人类污物接收站 | Sewage treatment plants - Principles for the design of structures and technical equipment - Part 7: Station for the transfer of faecal sewage |
| DIN 19569-8-2005 | 污水处理厂.结构和技术设备设计原则.第8部分:粒状介质过滤器和粒状固定台过滤器中污水处理用设备的具体原则 | Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 8: Specific principles for the equipment for sewage treatment in granular media filter and granular fixed bed filter |
| DIN 19569-9-2004 | 废水处理厂.结构和技术设备的设计原则.第9部分:污水污泥的机械排放 | Wastewater treatment plants - Principles for the design of structures and technical equipment - Part 9: Mechanical drainage of sewage sludge |
| DIN 2000-2000 | 饮用水集中供给.对饮用水和饮用水工厂计划、建造、使用、维修要求的指南.DVGW的技术规则 | Central drinking water supply - Guide lines regarding requirements for drinking water, planning, construction, operation and maintenance of plants - Technical rule of the DVGW |
| DIN 23011-6-2004 | 无烟煤选煤.选煤厂.第6部分:选煤厂实验室设备和操作 | Preparation of hard coal - Preparation plants - Part 6: Equipment and operation of a plant laboratory |
| DIN 23011-7 Bb.1-1985 | 选煤.选煤厂.设备监控.标准的应用方法 | Preparation of hard coal; preparation plants; equipment monitoring; means of applications for the standard |
| DIN 23011-7-2006 | 选煤.选煤厂.第7部分:设备监控 | Preparation of hard coal - Preparation plants - Part 7: Equipment monitoring |
| DIN 23081-1989 | 无烟煤制块厂.煤制块加工的定义、规范、试验程序、 | Hard coal briquetting-plants; definition, specification, testprocedures on briquette-processes |
| DIN 24536-1985 | 炼钢厂和轧钢机用设备.在技术图纸上带锚盒的地脚螺栓和T 型头螺栓的图形符号 | Equipment for steelworks and rolling mills; graphical symbols for stone bolts and tee head bolts with anchor boxes in technical drawings |
| DIN 24541-1985 | 炼钢厂和轧钢机用设备.按DIN24539的锚盒的模板吊杆.尺寸、标记 | Equipment for steelworks and rolling mills; shuttering steeves for anchor boxes according to DIN 24539; dimensions, designation |
| DIN 25406-2-1980 | 核电厂反应堆安全壳上的闸.材料进出闸.安全要求 | Locks at reactor safety containments of nuclear power plants; material locks, safety requirements |
| DIN 25441-1-1987 | 核电厂内大气中放射性的监测.安全要求 | Monitoring of radioactivity in the inner atmosphere of nuclear power plants; safety requirements |
| DIN 25455-1990 | 核电厂中放射性污染气体的处理.轻水反应堆 | Treatment of radioactive contaminated gases in nuclear power plants; light water reactors |
| DIN 25487-1990 | 核电厂建筑物的防水 | Water-proofing of buildings for nuclear power plants |
| DIN 29764-2-1984 | 航空航天.工厂设备用夹紧夹具 | Aerospace; clamping grippers for workshop facilities |
| DIN 30683-1-1978 | 面包房和糖果厂设备用带自然通风燃烧器的煤气设备 | Gas-appliances with atmospheric gasburners for installations in bakeries and confectioneries |
| DIN 38412-26-1994 | 德国检验水、废水和污泥的标准方法.第26部分:生物试验法(L 组).都市废水处理厂模拟用表面活性剂生物降解和 | German standard methods for the examination of water, waste water and sludge; bio-assays (group L); surfactant biodegradation and elimination test for simulation of municipal waste water treatment plants (L 26) |
| DIN 3966-3-1980 | 蜗杆和蜗杆传动.第3部分:由买方为厂方提供信息以便获需要的传动装置 | Worms and worm wheels; information to be given to the manufacturer by the purchaser in order to obtain the gear required |
| DIN 4261-1-2002 | 小型污水处理厂.第1部分:废水预处理厂 | Small sewage treatment plants - Part 1: Plants for waste water pretreatment |
| DIN 43687-1976 | 电气开关厂的空气压力发生站用的立式压力容器 | Vertical pressure tanks for air pressure generating stations in electrical switching plants |
| DIN 51666-2007 | 石油产品的试验.计算碳含量用合成物和精炼厂可燃气体热值的测定.气相色谱分析法 | Testing of petroleum products - Determination of composition for calculation of carbon content and calorific value of heating gas from refineries - Gas chromatography method |
| DIN 57510-1977 | 蓄电池和蓄电池厂的VDE 规范 | VDE specification for electric storage batteries and battery plants |
| DIN 57873-1-1982 | 发电厂和电输出系统引起的无线电干扰措施.≥10KV系统的无线电干扰(VDE规范) | Measures against radio interference from electric utility plants and electric traction systems; radio interference from systems of 10 kV and above [VDE Guide] |
| DIN 57873-2-1983 | 防止发电厂和电力输送系统无线电干扰措施.小于10 kV电力系统和电动火车的无线电干扰(VDE规范) | Measures against radio interference from electric utility plants and electric traction systems; radio interference from systems below 10 kV and from electrical trains [VDE Specification] |
| DIN 6280-14-1997 | 发电机组.活塞式内燃机驱动的发电机组.第14部分:活塞式内燃机驱动的综合热电厂.基础、要求、组合部件、结构 | Generating sets - Reciprocating internal combustion engines driven generating sets - Part 14: Combined heat and power system (CHPS) with reciprocating internal combustion engines; basics, requirements, components and application |
| DIN 6280-15-1997 | 发电机组.活塞式内燃机驱动的发电机组.第15部分:活塞式内燃机驱动的综合热电厂.试验 | Generating sets - Reciprocating internal combustion engines driven generating sets - Part 15: Combined heat and power system (CHPS) with reciprocating internal combustion engines; tests |
| DIN 65000-5-1983 | 航空航天.航空航天标准专业分组目录.工厂设备 | Aerospace; subject group index of aerospace standards; workshop facilities |
| DIN 67510-1-2002 | 发光颜料和产品.第1部分:厂家的测量和标记 | Photoluminescent pigments and products - Part 1: Measurement and marking at the producer |
| DIN 6779-13-2003 | 技术产品和技术产品文件标识分类规则.第13部分:化工厂 | Structuring principles for technical products and technical product documentation - Part 13: Chemical plants |
| DIN 8777-1996 | 酿酒厂设备.最低规范 | Brewhouse plants - Minimum specifications |
| DIN 8967-1968 | 烘烤薄铁盘.烤炉.面包糕点厂的制冷和冷冻设备.主要尺寸 | Baking sheets, baking ovens, refrigerators and freezers for bakeries; main dimensions |
| DIN EN 1169-1999 | 混凝土预制件.玻璃纤维增强混凝土工厂生产控制一般规则 | Precast concrete products - General rules for factory production control of glass-fibre reinforced cement; German version EN 1169:1999 |
| DIN EN 12255-1-2002 | 污水处理厂.第1部分:通用施工原则 | Wastewater treatment plants - Part 1: General construction principles; German version EN 12255-1:2002 |
| DIN EN 12255-10-2001 | 污水处理厂.第10部分:安全性原则 | Wastewater treatment plants - Part 10: Safety principles; German version EN 12255-10:2000 |
| DIN EN 12255-11-2001 | 废水处理工厂.第11部分:需要的通用数据 | Wastewater treatment plants - Part 11: General data required; German version EN 12255-11:2001 |
| DIN EN 12255-12-2003 | 废水处理工厂.第12部分:控制和自动化 | Wastewater treatment plants - Part 12: Control and automation; German version EN 12255-12:2003 |
| DIN EN 12255-13-2003 | 废水处理厂.第13部分:化学处理.沉淀/絮凝处理 | Wastewater treatment plants - Part 13: Chemical treatment; Treatment of wastewater by precipitation/flocculation; German version EN 12255-13:2002 |
| DIN EN 12255-14-2004 | 污水处理厂.第14部分:消毒 | Wastewater treatment plants - Part 14: Disinfection; German version EN 12255-14:2003 |
| DIN EN 12255-15-2004 | 污水处理厂.第15部分:活性污泥厂的曝气槽清水中氧气转化的测量 | Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants; German version EN 12255-15:2003 |
| DIN EN 12255-16-2005 | 污水处理厂.第16部分:物理（机械）过滤法.德文版本 EN 12255-16-2005 | Wastewater treatment plants - Part 16: Physical (mechanical) filtration; German version EN 12255-16:2005 |
| DIN EN 12255-3-2001 | 污水处理厂.第3部分:预处理(包括技术勘误AC-2000) | Wastewater treatment plants - Part 3: Preliminary treatment (includes corrigendum AC:2000); German version EN 12255-3:2000 + AC:2000) |
| DIN EN 12255-4-2002 | 污水处理厂.第4部分:初次澄清 | Wastewater treatment plants - Part 4: Primary settlement; German version EN 12255-4:2002 |
| DIN EN 12255-5-1999 | 污水处理厂.第5部分:污泥储留池法 | Wastewater treatment plants - Part 5: Lagooning processes; German version EN 12255-5:1999 |
| DIN EN 12255-6-2002 | 污水处理厂.第6部分:活性污泥处理 | Wastewater treatment plants - Part 6: Activated sludge process; German version EN 12255-6:2002 |
| DIN EN 12255-7-2002 | 污水处理厂.第7部分:生物固定薄膜反应器 | Wastewater treatment plants - Part 7: Biological fixed-film reactors; German version EN 12255-7:2002 |
| DIN EN 12255-8-2001 | 污水处理厂.第8部分:污泥处理和储存 | Wastewater treatment plants - Part 8: Sludge treatment and storage; German version EN 12255-8:2001 |
| DIN EN 12255-9-2002 | 污水处理厂.第9部分:气味控制和通风 | Wastewater treatment plants - Part 9: Odour control and ventilation; German version EN 12255-9:2002 |
| DIN EN 12285-1-2003 | 工厂制造的钢罐.第1部分:地下储存易燃和不易燃的水污染液体用卧式圆柱形单层和双层钢罐 | Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids; German version EN 12285-1:2003 |
| DIN EN 12285-2-2005 | 工厂制造的钢罐.第2部分:易燃和不易燃水污染液体的地上储存用卧式圆柱形单层和双层钢罐 | Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids; German version EN 12285-2:2005 |
| DIN EN 12376-1999 | 体外诊断用医疗器械.由厂商提供的生物着色用活体外诊断试剂信息; 德文版本 EN 12376:1999 | In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology; German version EN 12376:1999 |
| DIN EN 1279-6-2002 | 建筑物用玻璃.绝缘玻璃组件.第6部分:工厂生产控制和周期试验; 德文版本 EN 1279-6:2002 | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests; German version EN 1279-6:2002 |
| DIN EN 12873-1-2004 | 材料对人类生活用水的影响.离子迁移的影响.第1部分:非金属和非胶凝工厂制产品的试验方法 | Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products; German version EN 12873-1:2003 |
| DIN EN 12966-3-2005 | 道路垂直标志.可变信息交通标志.第3部分:工厂生产控制 | Road vertical signs - Variable message traffic signs - Part 3: Factory production control; German version EN 12966-3:2005 |
| DIN EN 12976-1-2006 | 太阳供热系统和部件.工厂制造系统.第1部分:一般要求 | Thermal solar systems and components - Factory made systems - Part 1: General requirements; German version EN 12976-1:2006 |
| DIN EN 12976-2-2006 | 太阳能系统和部件.工厂制造系统.第2部分:试验方法 | Thermal solar systems and components - Factory made systems - Part 2: Test methods; German version EN 12976-2:2006 |
| DIN EN 13035-3-2004 | 平板玻璃的制造、处理和加工用机械和工厂.安全要求.第3部分:切割机械 | Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines; German version EN 13035-3:2003 |
| DIN EN 13108-21-2006 | 沥青混合物.材料规范.第21部分:工厂产品控制 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control; English version of DIN EN 13108-21:2006-07 |
| DIN EN 13162 Berichtigung 1-2006 | 建筑物用隔热产品.工厂制矿物棉(MW)制品.规范 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification; German version EN 13162:2001, Corrigenda to DIN EN 13162:2001-10; German version EN 13162:2001/AC:2005 |
| DIN EN 13162-2001 | 建筑物绝热产品.工厂制矿棉制品.规范 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification; German version EN 13162:2001 |
| DIN EN 13163 Berichtigung 1-2006 | 建筑物隔热产品.工厂制弹性聚苯乙烯(EPS)制品.规范 | Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification; German version EN 13163:2001, Corrigenda to DIN 13163:2001-10; German version EN 13163:2001/AC:2005 |
| DIN EN 13163-2001 | 建筑物隔热产品.工厂制弹性聚苯乙烯制品.规范 | Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification; German version EN 13163:2001 |
| DIN EN 13164 Berichtigung 1-2006 | 建筑物用绝热产品.工厂制作的挤压聚亚氨酯泡沫塑料(XPS)产品.规范 | Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 13164:2001, Corrigenda to DIN EN 13164:2001-10; German version EN 13164:2001/AC:2005 |
| DIN EN 13164-2001 | 建筑物隔热产品.工厂制弹性聚苯乙烯泡沫制品.规范 | Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 13164:2001 |
| DIN EN 13164/A1-2004 | 建筑物用热隔绝产品.挤压聚苯乙烯泡沫的工厂制产品.规范 | Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 13164:2001/A1:2004 |
| DIN EN 13165 Berichtigung 1-2006 | 建筑物用绝热产品.工厂制作的硬质聚亚氨酯(PUR)泡沫塑料产品.规范 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification; German version EN 13165:2001 + A1:2004 + A2:2004, Corrigenda to DIN EN 13165:2005-02; German version EN 13165:2001/AC:2005 |
| DIN EN 13165-2005 | 建筑物用隔热产品.工厂制硬质聚氨酯泡沫制品.规范 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification; German version EN 13165:2001 + A1:2004 + A2:2004 |
| DIN EN 13166 Berichtigung 1-2006 | 建筑物用绝热产品.工厂生产的酚醛泡沫(PF)产品.规范 | Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification; German version EN 13166:2001, Corrigenda to DIN EN 13166:2001-10; German version EN 13166:2001/AC:2005 |
| DIN EN 13166-2001 | 建筑物隔热产品.工厂制酚醛泡沫制品.规范 | Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification; German version EN 13166:2001 |
| DIN EN 13166/A1-2004 | 建筑物用热隔绝产品.酚醛泡沫的工厂制产品.规范 | Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification; German version EN 13166:2001/A1:2004 |
| DIN EN 13167 Berichtigung 1-2006 | 建筑物用绝热产品.工厂制作的蜂窝状玻璃产品(CG).规范 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification; German version EN 13167:2001, Corrigenda to DIN EN 13167:2001-10; German version EN 13167:2001/AC:2005 |
| DIN EN 13167-2001 | 建筑物隔热产品.工厂制多孔泡沫玻璃制品.规范 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification; German version EN 13167:2001 |
| DIN EN 13167/A1-2004 | 建筑物用热隔绝产品.工厂制泡沫玻璃产品.规范 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification; German version EN 13167:2001/A1:2004 |
| DIN EN 13168 Berichtigung 1-2006 | 建筑物用绝热产品.工厂生产的木丝(WW)产品.规范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001, Corrigenda to DIN EN 13168:2001-10; German version EN 13168:2001/AC:2005 |
| DIN EN 13168-2001 | 建筑物隔热产品.工厂制木纤维制品.规范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001 |
| DIN EN 13168/A1-2004 | 建筑物用热隔绝产品.工厂制木丝产品.规范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001/A1:2004 |
| DIN EN 13169 Berichtigung 1-2006 | 建筑物用绝热产品.工厂制作的膨胀的珍珠岩产品(EPB).规范 | Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification; German version EN 13169:2001, Corrigenda to DIN EN 13169:2001-10; German version EN 13169:2001/AC:2005 |
| DIN EN 13169-2001 | 建筑物隔热产品.工厂制弹性珍珠岩制品.规范 | Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification; German version EN 13169:2001 |
| DIN EN 13169/A1-2004 | 建筑物用热隔绝产品.工厂制膨胀珍珠岩.规范 | Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification; German version EN 13169:2001/A1:2004 |
| DIN EN 13170 Berichtigung 1-2006 | 建筑物用绝热产品.工厂制作的膨胀软木(ICB)产品.规范 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification; German version EN 13170:2001, Corrigenda to DIN EN 13170:2001-10; German version EN 13170:2001/AC:2005 |
| DIN EN 13170-2001 | 建筑物隔热产品.工厂制弹性软木制品.规范 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification; German version EN 13170:2001 |
| DIN EN 13171 Berichtigung 1-2006 | 建筑物用绝热产品.工厂生产的木纤维产品.规范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001, Corrigenda to DIN EN 13171:2001-10; German version EN 13171:2001/AC:2005 |
| DIN EN 13171-2001 | 建筑物隔热产品.工厂制木纤维制品.规范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001 |
| DIN EN 13171/A1-2004 | 建筑物用热隔绝产品.工厂制木纤维产品.规范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001/A1:2004 |
| DIN EN 13212-2001 | 公路标记材料.工厂生产控制要求:德文版本 EN 13212:2001 | Road marking materials - Requirements for the factory production control; German version EN 13212:2001 |
| DIN EN 13454-1-2005 | 地板层找平用基于硫酸钙的粘合剂、复合粘合剂和工厂制混合物.第1部分:定义和要求 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements; German version EN 13454-1:2004 |
| DIN EN 13454-2-2007 | 地板层找平用基于硫酸钙的粘合剂、复合粘合剂和工厂制混合物.第2部分:试验方法 | Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods; German version EN 13454-2:2003+A1:2007 |
| DIN EN 14081-3-2006 | 木结构.矩形截面强度分级结构木材.第2部分:机械分级.工厂生产控制的附加要求.德文版本 EN 14081-3-2005 | Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control; German version EN 14081-3:2005 |
| DIN EN 14509-2007 | 自支撑双层隔音金属面板.工厂制作产品.规范 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications; English version of DIN EN 14509:2007-02 |
| DIN EN 14650-2005 | 预浇铸混凝土产品.金属纤维混凝土工厂生产控制通用规则 | Precast concrete products - General rules for factory production control of metallic fibered concrete; German version EN 14650:2005 |
| DIN EN 14733-2005 | 沥青和沥青粘合剂.沥青乳剂、软制和轻质沥青工厂生产控制 | Bitumen and bituminous binders - Bituminous emulsions, fluxed and cut-back bitumen factory production control; German version EN 14733:2005 |
| DIN EN 14899-2006 | 废弃物特性.废弃物材料取样.取样工厂制备和应用的筐架 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a sampling plan; German version EN 14899:2005 |
| DIN EN 14933-2007 | 土木工程用隔热和轻质填装制品.工厂制膨胀聚苯乙烯(EPS)产品.规范 | Thermal insulation and light weigth fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification; German version EN 14933:2007 |
| DIN EN 14934-2007 | 土木工程用隔热和轻质填装制品.工厂制挤制聚苯乙烯泡沫(XPS)产品.规范 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded polystyrene foam (XPS) - Specification; German version EN 14934:2007 |
| DIN EN 14944-1-2006 | 用于人消费的水中水泥产品的影响.试验方法.第1部分:水泥产品制造厂对感官参数的影响 | Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of factory made cementitious products on organoleptic parameters English version of DIN EN 14944-1:2006-07 |
| DIN EN 15159-1-2006 | 釉瓷和搪瓷.加工厂的玻璃层设备.第1部分:设备、部件、器具和附件的质量要求 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories; German version EN 15159-1:2006 |
| DIN EN 15159-2-2006 | 釉瓷和搪瓷.加工厂的玻璃层设备.第2部分:耐化学反应腐蚀和热冲击得设计和规范 | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock; German version EN 15159-2:2006 |
| DIN EN 15159-3-2006 | 釉瓷和搪瓷.加工厂的玻璃层设备.第3部分:抗热震性 | Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 3: Thermal shock resistance; German version EN 15159-3:2006 |
| DIN EN 165000-3-1996 | 薄膜和混合集成电路.第3部分:薄膜和混合集成电路生产厂自查清单和报告 | Film and hybrid integrated circuits - Part 3: Self-audit checklist and report for film and hybrid integrated circuit manufacturers; German version EN 165000-3:1996 |
| DIN EN 326-2 Berichtigung 1-2006 | 木基板材.取样、切割和检验.第2部分:工厂的质量控制 | Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory - German version EN 326-2:2000, Corrigenda to DIN EN 326-2:2000-10; German version EN 326-2:2000/AC:2005 |
| DIN EN 326-2-2000 | 木质板.取样.切割和检验.第2部分:工厂质量控制 | Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory; German version EN 326-2:2000 |
| DIN EN 376-2002 | 由厂商提供的自测用活体外诊断试剂信息; 德文版本 EN 376:2002, 德文和英文文本 | Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing; German version EN 376:2002, German and English texts |
| DIN EN 45510-1-1997 | 发电厂设备采购指南.第1部分:通用条款 | Guide for procurement of power station equipment - Part 1: Common clauses; German version EN 45510-1:1997 |
| DIN EN 45510-2-2-1999 | 电厂设备采购指南.第2部分:电气设备.不间断供电 | Guide for procurement of power station equipment - Part 2-2: Electrical equipment; uninterruptible power supplies; German version EN 45510-2-2:1999 |
| DIN EN 45510-2-5-2003 | 发电厂设备购置指南.第2-5部分:电气设备.马达 | Guide for procurement of power station equipment - Part 2-5: Electrical equipment; Motors; German version EN 45510-2-5:2002 |
| DIN EN 45510-2-6-2001 | 发电厂设备采购指南.第2-6部分:电气设备.发电机 | Guide for procurement of power station equipment - Part 2-6: Electrical equipment; Generators; German version EN 45510-2-6:2000 |
| DIN EN 45510-2-7-2003 | 发电厂设备购置指南.第2-7部分:电气设备.开关设备和控制设备 | Guide for procurement of power station equipment - Part 2-7: Electrical equipment; Switchgear and controlgear; German version EN 45510-2-7:2002 |
| DIN EN 45510-3-1-2000 | 电厂设备采购指南.第3-1部分:锅炉.水管锅炉 | Guide for procurement of power station equipment - Part 3-1: Boilers; water tube boilers; German version EN 45510-3-1:1999 |
| DIN EN 45510-3-2-2000 | 电厂设备采购指南.第3-2部分:锅炉.火管锅炉 | Guide for procurement of power station equipment - Part 3-2: Boilers; shell boilers; German version EN 45510-3-2:1999 |
| DIN EN 45510-3-3-2000 | 电厂设备采购指南.第3-4部分:锅炉.沸腾燃烧锅炉 | Guide for procurement of power station equipment - Part 3-3: Boilers; boilers with fluidized bed firing; German version EN 45510-3-3:1999 |
| DIN EN 45510-4-10-1999 | 发厂设备采购指南.第4-10部分:锅炉附件.烟道气脱硝(DeNO<指数x>)设备 | Guide for procurement of power station equipment - Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NO<(Index)x>) plant; German version EN 45510-4-10:1999 |
| DIN EN 45510-4-4-2002 | 电厂设备采置指南.第4-4部分:锅炉辅助设备.燃料制备设备 | Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries; Fuel preparation equipment; German version EN 45510-4-4:2002 |
| DIN EN 45510-4-5-2002 | 电厂设备采购指南.第4-5部分:锅炉辅助设备.煤搬运和散货堆存 | Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries; Coal handling and bulk storage plant; German version EN 45510-4-5:2002 |
| DIN EN 45510-4-8-1999 | 电厂设备采购指南.第4-8部分:锅炉附件.灰尘处理设备 | Guide for procurement of power station equipment - Part 4-8: Boiler auxiliaries - Dust handling plant; German version EN 45510-4-8:1999 |
| DIN EN 45510-4-9-1999 | 电厂设备采购指南.第4-9部分:锅炉附件.吹灰机 | Guide for procurement of power station equipment - Part 4-9: Boiler auxiliaries - Sootblowers; German version EN 45510-4-9:1999 |
| DIN EN 45510-5-1-1998 | 发电厂设备的购置说明.第5-1部分:蒸汽轮机 | Guide for procurement of power station equipment - Part 5-1: Steam turbines; German version EN 45510-5-1:1998 |
| DIN EN 45510-5-2-1998 | 发电厂设备购置说明.第5-2部分:燃汽轮机 | Guide for procurement of power station equipment - Part 5-2: Gas turbines; German version EN 45510-5-2:1998 |
| DIN EN 45510-5-3-1998 | 发电厂设备购置说明.第5-3部分:风力涡轮机 | Guide for procurement of power station equipment - Part 5-3: Wind turbines; German version EN 45510-5-3:1998 |
| DIN EN 45510-5-4-1998 | 发电厂设备购置说明.第5-4部分:水轮机、蓄水储能泵和泵涡轮机 | Guide for procurement of power station equipment - Part 5-4: Hydraulic turbines, storage-pumps and pump-turbines; German version EN 45510-5-4:1998 |
| DIN EN 45510-6-1-1998 | 发电厂设备购置说明.第6-1部分:涡轮机辅助设备.除气器 | Guide for procurement of power station equipment - Part 6-1: Turbine auxiliaries; deaerators; German version EN 45510-6-1:1998 |
| DIN EN 45510-6-2-1998 | 发电厂设备购置说明.第6-2部分:涡轮机辅助设备.给水加热器 | Guide for procurement of power station equipment - Part 6-2: Turbine auxiliaries; feedwater heaters; German version EN 45510-6-2:1998 |
| DIN EN 45510-6-3-1998 | 发电厂设备购置说明.第6-3部分:涡轮机辅助设备.冷凝设备 | Guide for procurement of power station equipment - Part 6-3: Turbine auxiliaries; condensator plant; German version EN 45510-6-3:1998 |
| DIN EN 45510-6-4-2000 | 发电厂设备购置指南.第6-4部分:涡轮机辅助设备和泵 | Guide for procurement of power station equipment - Part 6-4: Turbine auxiliaries; pumps; German version EN 45510-6-4:1999 |
| DIN EN 45510-6-5-2000 | 发电厂设备购置指南.第6-5部分:涡轮机辅助设备和干燥冷却系统 | Guide for procurement of power station equipment - Part 6-5: Turbine auxiliaries; dry cooling systems; German version EN 45510-6-5:1999 |
| DIN EN 45510-6-6-2000 | 发电厂设备采购指南.第6-6部分:涡轮机辅助设备、湿式和湿式/干燥冷却塔 | Guide for procurement of power station equipment - Part 6-6: Turbine auxiliaries; wet and wet/dry cooling towers; German version EN 45510-6-6:1999 |
| DIN EN 45510-6-7-1998 | 发电厂设备购置说明.第6-7部分:涡轮机辅助设备.去湿再加热器 | Guide for procurement of power station equipment - Part 6-7: Turbine auxiliaries; Moisture separator reheaters; German version EN 45510-6-7:1998 |
| DIN EN 45510-6-8-2000 | 发电厂设备采购指南.第6-8部分:涡轮机辅助设备和起重机 | Guide for procurement of power station equipment - Part 6-8: Turbine auxiliaries; cranes; German version EN 45510-6-8:1999 |
| DIN EN 45510-6-9-2000 | 发电厂设备购置指南.第6-9部分:涡轮机辅设备和冷却水系统 | Guide for procurement of power station equipment - Part 6-9: Turbine auxiliaries; cooling water systems; German version EN 45510-6-9:1999 |
| DIN EN 45510-7-1-2000 | 发电厂设备和系统购置指南.第7-1部分:管道系统和阀.高压管道系统 | Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999 |
| DIN EN 45510-7-2-2000 | 发电厂设备和系统购置指南.第7-2部分:管道系统和阀.锅炉和高压管路阀门 | Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999 |
| DIN EN 60401-3-2004 | 软磁材料制芯的术语和命名.第3部分:写入变压器和电感器磁芯制造厂产品目录中的数据格式指南 | Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores (IEC 60401-3:2003); German version EN 60401-3:2003 |
| DIN EN 61000-2-4-2003 | 电磁兼容性(EMC).第2-4部分:环境.工厂低频传导干扰的兼容性水平 | Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances (IEC 61000-2-4:2002); German version EN 61000-2-4:2002 |
| DIN EN 61400-25-1-2007 | 风力涡轮机.第25-1部分:风力电厂监控用通信设备.原理和模型总描述 | Wind turbines - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models (IEC 61400-25-1:2006); German version EN 61400-25-1:2007 |
| DIN EN 61400-25-5-2007 | 风力涡轮机.第25-5部分:风力电厂监控用通信设备.合格性测试 | Wind turbines - Part 25-5: Communications for monitoring and control of wind power plants - Conformance testing (IEC 61400-25-5:2006); German version EN 61400-25-5:2007, text in English |
| DIN EN 61660-1 Bb.1-2002 | 短路电流.电厂和变电站直流辅助设备中的短路电流.第1部分:短路电流和效应的计算范例 (IEC/TR 61660-3:2000- | Short-circuit currents - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Examples of calculations (of short-circuit current and effects) (IEC/TR 61660-3:2000-02) |
| DIN EN 61660-1-1998 | 短路电流.发电厂和变电站中直流辅助设备的短路电流.第1部分:短路电流的计算 | Short-circuit currents - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents (IEC 61660-1:1997); German version EN 61660-1:1997 |
| DIN EN 61660-2-1998 | 短路电流.发电厂和变电站中直流辅助设备的短路电流.第2部分:效应计算 | Short-circuit currents - Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects (IEC 61660-2:1997); German version EN 61660-2:1997 |
| DIN EN 62381-2007 | 加工工业中的自动化系统.工厂验收试验(FAT)、现场验收试验(SAT)和现场集成测试(SIT) | Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT) and site integration test (SIT) (IEC 62381:2006); German version EN 62381:2007 |
| DIN EN ISO 13705-2007 | 石油和天然气工业.一般炼油厂用火焰加热器 | Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2006); English version EN ISO 13705:2006 |
| DIN IEC 60780-2000 | 核电厂.安全系统电气设备.合格鉴定 | Nuclear power plants - Electrical equipment of the safety system - Qualification (IEC 60780:1998) |
| DIN IEC 61226-2005 | 核电厂.安全重要仪表和控制系统.仪表和控制功能分级 | Nuclear power plants - Instrumentation and control systems important to safety - Classification of instrumentation and control functions (IEC 61226:2005) |
| DIN IEC 61513-2002 | 核电厂.对安全很重要的系统用仪表设备和控制器.系统的一般要求 (IEC 61513:2001) | Nuclear power plants - Instrumentation and control for systems important to safety - General requirements for systems (IEC 61513:2001) |
| DIN IEC 61513/A100-2005 | 核电厂.对安全重要的仪器仪表和控制系统.系统的一般要求.国家附录ND (资料性): 其他IEC标准的共同有效的规 | Nuclear power plants - Instrumentation and control systems important to safety - General requirements for systems - National annex ND (informative): Co-valid provisions of other IEC Standards |
| DIN IEC 61839-2002 | 核电厂.控制室的设计.功能分析和测定 (IEC 61839:2000) | Nuclear power plants - Design of control-rooms - Functional analysis and assignment (IEC 61839:2000) |
| DIN IEC 62117-2001 | 核电厂.压水堆(PWR).低温停机过程中堆芯充分冷却监测 | Nuclear power plants - Pressurized light water reactors - Monitoring adequate cooling within the core during cold shutdown (IEC 62117:1999) |
| DIN IEC 62138-2004 | 核电厂.设备和控制的安全重要性.执行B类或C类功能的计算机系统的软件情况 | Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions (IEC 62138:2004) |
| DIN ISO 3780-1985 | 道路车辆.各国制造厂家标志符号(WMI)代码 | Road vehicles; world manufacturer identifier (WMI) code |
| DIN ISO 7919-5-2005 | 机械振动.通过旋转轴上的测量评价机械振动.第5部分:水力发电厂和泵站机组 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants (ISO 7919-5:2005) |
| DIN ISO 8297-2000 | 声学.环境中声压级评定用多声源工业厂房声功率级的测定.工程法 | Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method (ISO 8297:1994) |
| DIN V 4108-10-2004 | 建筑物中隔热和节能.热绝缘材料的应用要求.第10部分:工厂制产品 | Thermal insulation and energy economy in buildings - Application-related requirements for thermal insulation materials - Part 10: Factory made products |
| DIN V 45694-2006 | 机械振动.包括由机械制造厂提供的可用信息对手传递振动效应的评定指南(CEN/TR 15350:2006) | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery (CEN/TR 15350:2006) |
| DIN V 52144-1995 | 防水挠性板材.沥青和聚合沥青板材.工厂内部管理 | Flexible sheets for waterproofing - Bitumen and polymerbitumen sheeting - Manufacturer's internal control |
| DIN VDE 0276-604-1995 | 电力电缆.第604部分:发电厂用有特殊防火性能的标称电压为Uo/U 0.6/1KV电力电缆 | Power cables - Part 604: Power cables of nominal voltages U<(Index)0>/U 0,6/1 kV with special fire performance for use in power stations; German version HD 604 S1 Part 1 and Part 5G:1994 |
| DIN VDE 0873-1-1982 | 防止由电业厂和电气牵引系统引起无线电干扰的措施.由电压等于并大于10KV的系统引起的无线电干扰 [VDE 指南] | Measures against radio interference from electric utility plants and electric traction systems; radio interference from systems of 10 kV and above [VDE Guide] |
| DIN VDE 0873-2-1983 | 防止由电业厂和电气牵引系统引起无线电干扰的措施.由电压小于10KV的系统和电气列车引起的无线电干扰. [VDE | Measures against radio interference from electric utility plants and electric traction systems; radio interference from systems below 10 kV and from electrical trains [VDE Specification] |
| 编号 | 中文名称 | 英文名称 |