编号 |
中文名称 |
英文名称 |
EN 1041-1998
|
厂商提供的医疗设备信息
|
Information supplied by the manufacturer with medical devices
|
EN 1169-1999
|
预制混凝土制品 玻璃纤维增强水泥厂生产控制的一般规则
|
Precast concrete products - General rules for factory production control of glass-fibre reinforced cement
|
EN 12255-1-2002
|
废水处理厂 第1部分:一般建造原则
|
Wastewater treatment plants - Part 1: General construction principles
|
EN 12255-10-2000
|
废水处理厂 第10部分:安全规则
|
Wastewater treatment plants - Part 10: Safety principles
|
EN 12255-11-2001
|
废水处理厂 第11部分:一般要求的数据
|
Wastewater treatment plants - Part 11: General data required
|
EN 12255-12-2003
|
废水处理厂 第12部分:控制和自动化
|
Wastewater treatment plants - Part 12: Control and automation
|
EN 12255-13-2002
|
废水处理厂 第13部分:化学处理 通过沉淀/絮凝作用除理废水
|
Wastewater treatment plants - Part 13: Chemical treatment; Treatment of wastewater by precipitation/flocculation
|
EN 12255-3-2000+AC-2000
|
废水处理厂 第3部分:预处理
|
Wastewater treatment plants - Part 3: Preliminary treatment
|
EN 12255-4-2002
|
废水处理厂 第4部分:初级沉降
|
Wastewater treatment plants - Part 4: Primary settlement
|
EN 12255-5-1999
|
废水处理厂 第5部分:沉淀池处理
|
Wastewater treatment plants - Part 5: Lagooning processes
|
EN 12255-6-2002
|
废水处理厂 第6部分:活性污泥处理
|
Wastewater treatment plants - Part 6: Activated sludge process
|
EN 12255-7-2002
|
废水处理厂 第7部分:生物固定膜反应器
|
Wastewater treatment plants - Part 7: Biological fixed-film reactors
|
EN 12255-8-2001
|
废水处理厂 第8部分: 污泥处理和存贮
|
Wastewater treatment plants - Part 8: Sludge treatment and storage
|
EN 12255-9-2002
|
废水处理厂 第9部分:气味控制和通风
|
Wastewater treatment plants - Part 9: Odour control and ventilation
|
EN 12285-1-2003
|
工厂预制钢罐 第1部分:易燃和不易燃的水污染液体地下储存用卧式圆柱形单层和双层钢罐
|
Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
|
EN 1279-6-2002
|
建筑玻璃 隔离玻璃装置 第6部分:工厂生产控制及周期试验
|
Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests
|
EN 12919-1999
|
工厂环境 体积流速大于5L/min的化学药剂采样泵 要求与试验方法
|
Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods
|
EN 12976-1-2000
|
太阳能系统及构件 工厂预制系统 第1部分:一般要求
|
Thermal solar systems and components - Factory made systems - Part 1: General requirements
|
EN 12976-2-2000
|
太阳能系统及构件 工厂预制系统 第2部分:试验方法
|
Thermal solar systems and components - Factory made systems - Part 2: Test methods
|
EN 13098-2000
|
工厂环境 空中微生物和空中毒素的测量准则
|
Workplace atmospheres - Guidelines for measurement of airborne micro-organisms and endotoxin
|
EN 13162-2001
|
建筑物保温制品 工厂预制石棉(MW)制品 规范
|
Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification
|
EN 13163-2001
|
建筑物保温制品 工厂预制多孔聚苯乙烯(EPS)制品 规范
|
Thermal insulation products for buildings - Factory made products of expanded polystyrene (EPS) - Specification
|
EN 13164-2001
|
建筑物保温制品 工厂预制挤压泡沫塑料(XPS)制品 规范
|
Thermal insulation products for buildings - Factory made products of extruded polystyrene foam (XPS) - Specification
|
EN 13165-2001
|
建筑物保温制品 工厂预制刚性聚氨酯泡沫(PUR)制品 规范
|
Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification
|
EN 13166-2001
|
建筑物保温制品 工厂预制酚醛泡沫(PF)制品 规范
|
Thermal insulation products for buildings - Factory made products of phenolic foam (PF) - Specification
|
EN 13167-2001
|
建筑物保温制品 工厂预制泡沫玻璃(CG)制品 规范
|
Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification
|
EN 13168-2001
|
建筑物保温制品 工厂预制刨花(WW)制品 规范
|
Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification
|
EN 13169-2001
|
建筑物保温制品 工厂预制多孔珍珠岩(EPB)制品 规范
|
Thermal insulation products for buildings - Factory made products of expanded perlite (EPB) - Specification
|
EN 13170-2001
|
建筑物保温制品 工厂预制多孔软木(ICB)制品 规范
|
Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification
|
EN 13171-2001
|
建筑物保温制品 工厂预制木质纤维(WF)制品 规范
|
Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification
|
EN 13205-2001
|
工厂环境 空气粒子浓度测定仪性能评估
|
Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
|
EN 13212-2001
|
路标材料 工厂生产控制
|
Road marking materials - Requirements for the factory production control
|
EN 13890-2002
|
工厂环境 空气粒子中金属和类金属的测量程序 要求和试验方法
|
Workplace atmospheres - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods
|
EN 1620-1996
|
生物技术 大规模加工和生产 依照危害程度的工厂建造
|
Biotechnology - Large-scale process and production - Plant building according to the degree of hazard
|
EN 2000-1991
|
航空航天系列 质量保证 EN航空航天产品 制造厂商质量体系的批准
|
Aerospace series - Quality assurance - EN aerospace products - Approval of the quality system of manufacturers
|
EN 326-2-2000
|
木基板 取样、剪切和检验 第2部分:工厂中的质量控制
|
Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory
|
EN 50065-2-3-2003
|
频率范围为3kHz-148.5kHz的低压电气设备的信号装置 第2-3部分:主通信设备频率范围为95kHz-148.5kHz以及计
|
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by el
|
EN 61000-2-4-2002
|
电磁兼容性(MEC) 第2-4部分:环境 工厂中低频传导骚扰的兼容性水平
|
Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances (IEC 61000-2-4:2002) / Note: Endorsement notice
|
EN 61181-1993
|
浸渍绝缘材料 溶解气体分析(DGA)应用于电气设备的工厂试验
|
Impregnated insulating materials - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment (IEC 61181:1993)
|
EN 61355-1997
|
工厂、系统和设备用文件的分类及代码
|
Classification and designation of documents for plants, systems and equipment (IEC 61355:1997)
|
EN 61660-1-1997
|
电厂和变电站直流辅助设施中的短路电流 第1部分:短路电流的计算
|
Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents (IEC 61660-1:1997)
|
EN 61660-2-1997
|
电厂和变电站直流辅助设施中的短路电流 第2部分:效应计算
|
Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects (IEC 61660-2:1997)
|
EN 710-1997
|
铸模、制蕊机械、工厂及相关设备的安全要求
|
Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment
|
EN ISO 13705-2001
|
石油和天然气工业 一般炼油厂的烧火的加热器
|
Petroleum and natural gas industries - Fired heaters for general refinery service (ISO 13705:2001)
|
EN ISO 5667-13-1997
|
水质 采样 第13部分:生活污水和水处理厂污水采样指南
|
Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works (ISO 5667-13:1997)
|
prEN 12255-14-2003
|
废水处理厂 第14部分:消毒
|
Wastewater treatment plants - Part 14: Disinfection
|
prEN 12255-15-2003
|
废水处理 厂 第15部分:活性污泥曝气池中清水中氧传送的测量
|
Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in activated sludge aeration tanks
|
prEN 12255-2-1995
|
废水处理厂 第2部分:生废水泵送装置的性能要求
|
Wastewater treatment plants - Part 2: Performance requirements of raw wastewater pumping installations
|
prEN 12271-10-2002
|
地面修整 规范 第10部分:工厂生产控制
|
Surface dressing - Specifications - Part 10: Factory production control
|
prEN 12285-2-2001
|
工厂预制金属罐 第2部分:用于地下贮存易燃和不易燃水污染液的柱形单层皮和双层皮卧式罐
|
Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
|
prEN 12411-1-1996
|
工厂环境 直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第1部分:一般要求和试验方法
|
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods
|
prEN 12411-2-1996
|
工厂环境 直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第2部分:用于测量极限值范围内浓度的设
|
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for measuring concentrations in the range of limit values
|
prEN 12411-4-1997
|
工作场所的气体 工厂环境 直接探测有毒气体和蒸气及直接测量其浓度的电子设备 第4部分:选择、安装、
|
Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance
|
prEN 12873-1-2003
|
材料对人类生活用水的影响 流动产生的影响 第1部分:非粘结性工厂预制品试验方法
|
Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products
|
prEN 13108-10-1997
|
沥青混合物 质量 第10部分:工厂生产控制
|
Bituminous mixtures - Quality - Part 10: Factory production control
|
prEN 14081-3-2000
|
木结构 具有矩形截面的按强度分级的结构用木材 第3部分:机械级配 工厂生产管理的附加要求
|
Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading - Additional requirements for factory production control
|
prEN 14303-2002
|
工业装置和建筑设备用热绝缘产品 工厂制矿棉产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification
|
prEN 14304-2002
|
工业装置和建筑设备用热绝缘产品 工厂制柔性人造橡胶泡沫产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification
|
prEN 14305-2002
|
工业装置和建筑设备用热绝缘产品 工厂制蜂窝玻璃产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification
|
prEN 14306-2002
|
工业装置和建筑设备用热绝缘产品 工厂制硅酸钙产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification
|
prEN 14307-2002
|
工业装置和建筑设备用热绝缘产品 工厂制挤压聚苯乙烯泡沫产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
|
prEN 14308-2002
|
工业装置和建筑设备用热绝缘产品 工厂制硬质聚氨基甲酸乙酯泡沫和聚异氰尿酸酯泡沫产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification
|
prEN 14309-2002
|
工业装置和建筑设备用热绝缘产品 工厂制膨胀聚氯乙烯产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
|
prEN 14313-2002
|
工业装置和建筑设备用隔热产品 工厂制聚乙烯泡沫产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
|
prEN 14314-2002
|
工业装置和建筑设备用热绝缘产品 工厂制酚醛泡沫产品 规范
|
Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification
|
prEN 14440-2002
|
灰浆路面层 工厂生产控制
|
Slurry surfacing - Factory production control
|
prEN 2000-1998
|
航空航天系列 质量保证 EN航空航天产品 制造厂商质量体系批准
|
Aerospace series - quality assurance - EN aerospace products - Approval of the quality systems of manufacturers
|
prEN 61660-3-1998
|
电厂和变电站直流辅助设施中的短路电流 第3部分:计算举例
|
IEC 61660-3: Short-circuit currents in DC auxiliary installations in power plants and substations - Part 3: Examples of calculation
|
prEN 62270-2001
|
用于水利发电厂自动化的计算机控制的IEEE指南
|
IEEE Guide for computer-based control for hydroelectric power plant automation
|
编号 |
中文名称 |
英文名称 |