| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60401-3-2003 | 磁性软铁氧体制磁芯的术语和命名.第3部分:写入变压器和电感器磁芯制造厂产品目录中的数据格式指南 | Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores |
| IEC 60744-1983 | 核电厂的安全逻辑装置 特性和试验方法 | Safety logic assemblies of nuclear power plants. Characteristics and test methods |
| IEC 60780-1998 | 核电厂 安全系统的电气设备 质量鉴定 | Nuclear power plants - Electrical equipment of the safety system - Qualification |
| IEC 60951-1-1988 | 核电厂事故和事故后的辐射监测设备 第1部分:一般要求 | Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants; part 1: general requirements |
| IEC 60951-2-1988 | 核电厂事故和事故后的辐射监测设备 第2部分:气态排出物中放射性惰性气体的连续监测设备 | Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants. Part 2: Equipment for continously monitoring radioactive noble gases in gaseous effluents |
| IEC 60951-3-1989 | 核电厂事故和事故后的辐射监测设备 第3部分:高量程γ射线剂量率监测设备 | Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants; part 3: high range area gamma radiation dose rate monitoring equipment |
| IEC 60951-4-1991 | 核电厂事故和事故后的辐射监测设备 第4部分:轻水核电站液流处理 | Radiation monitoring equipment for accident and post-accident conditions in nuclear power plants; part 4: process stream in light water nuclear power plants |
| IEC 60951-5-1994 | 核电厂事故和事故后的辐射监测设备 第5部分:轻水反应堆核电站中空气的放射性活度 | Nuclear power plants; radiation monitoring equipment for accident and post-accident conditions; part 5: radioactivity of air in light water nuclear power plants |
| IEC 60964-1989 | 核电厂控制室设计 | Design for control rooms of nuclear power plants |
| IEC 61000-2-4-2002 | 电磁兼容性(EMC).第2-4部分:环境.工厂中低频传导骚扰的兼容性水平 | Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances |
| IEC 61031-1990 | 核电厂正常工况和预计运行事件期间的固定区域γ辐射剂量率监测设备的设计、安装和应用准则 | Design, location and application criteria for installed area gamma radiation dose rate monitoring equipment for use in nuclear power plants during normal operation and anticipated operational occurrences |
| IEC 61181-2007 | 填充矿物油的电气设备.溶解气体分析(DGA)用于电气设备工厂试验 | Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
| IEC 61225-2005 | 核电厂.安全重要仪表和控制系统.供电要求 | Nuclear power plants - Instrumentation and control systems important to safety - Requirements for electrical supplies |
| IEC 61226-2005 | 核电厂.安全重要仪表和控制系统.仪表和控制功能分级 | Nuclear power plants - Instrumentation and control systems important to safety - Classification of instrumentation and control functions |
| IEC 61227-1993 | 核电厂 控制室 操纵员用控制器 | Nuclear power plants; control rooms; operator controls |
| IEC 61355-1997 | 工厂、系统和设备用文件的分类及代号 | Classification and designation of documents for plants, systems and equipment |
| IEC 61400-25-1-2006 | 风力涡轮机.第25-1部分:风力发电厂监测和控制通信系统.原理和模型总描述 | Wind turbines - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models |
| IEC 61400-25-2-2006 | 风力涡轮机.第25-2部分:风力发电厂监测和控制的通信系统.信息模型 | Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models |
| IEC 61400-25-3-2006 | 风力涡轮机.第25-3部分:风力发电厂监测和控制的通信系统.信息交换模型 | Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models |
| IEC 61400-25-5-2006 | 风力涡轮机.第25-5部分:风力电厂监控用通信设备.合格试验 | Wind turbines - Part 25-5: Communications for monitoring and control of wind power plants - Conformance testing |
| IEC 61468 AMD 1-2003 | 核电厂.堆芯仪器仪表.自给能中子探测器的特性和试验方法.修改1 | Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors; Amendment 1 |
| IEC 61468-2000 | 核电厂 堆芯测量仪表 自给能中子探测器的特性和试验方法 | Nuclear power plants - In-core instrumentation - Characteristics and test methods of self-powered neutron detectors |
| IEC 61497-1998 | 核电厂 安全重要电器连锁装置 设计和实现的推荐规范 | Nuclear power plants - Electrical interlocks for functions important to safety - Recommendations for design and implementation |
| IEC 61500-1996 | 核电厂 安全重要仪表和控制系统 多道数据传送的功能要求 | Nuclear power plants - Instrumentation and control systems important to safety - Functional requirements for multiplexed data transmission |
| IEC 61502-1999 | 核电厂 加压水反应堆 内部结构振动监测 | Nuclear power plants - Pressurized water reactors - Vibration monitoring of internal structures |
| IEC 61504-2000 | 核电厂 安全重要仪表和控制系统 整个工厂范围的辐射监测 | Nuclear power plants - Instrumentation and control systems important to safety - Plant-wide radiation monitoring |
| IEC 61513-2001 | 核电厂 对安全重要的系统的仪器仪表和控制设备 系统的一般要求 | Nuclear power plant - Instrumentation and control for systems important to safety; General requirements for systems |
| IEC 61660-1 Corrigendum 1-1999 | 电厂与变电站直流辅助设施中的短路电流.第1部分:短路电流的计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-1 Corrigendum 2-2000 | 电厂与变电站直流辅助设施中的短路电流.第1部分:短路电流的计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-1-1997 | 电厂与变电站直流辅助设施中的短路电流 第1部分:短路电流的计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents |
| IEC 61660-2-1997 | 电厂与变电站直流辅助设施中的短路电流 第2部分:效应计算 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 2: Calculation of effects |
| IEC 61771-1995 | 核电厂 主控制室 设计的鉴定和批准 | Nuclear power plants - Main control room - Verification and validation of design |
| IEC 61772-1995 | 核电厂 主控制室 直观显示装置的应用 | Nuclear power plants - Main control room - Application of visual display units (VDU) |
| IEC 61839-2000 | 核电厂 控制室的设计 功能分析和测定 | Nuclear power plants - Design of control rooms - Functional analysis and assignment |
| IEC 61888-2002 | 核电厂.以安全为主的仪器仪表.事故保护定值器的测定和维护 | Nuclear power plants - Instrumentation important to safety - Determination and maintenance of trip setpoints |
| IEC 62138-2004 | 核电厂.设备和控制的安全重要性.表现B类或C类功能的基于计算机系统的软件情况 | Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions |
| IEC 62381-2006 | 加工工业中的自动化系统.工厂验收试验(FAT)、现场验收试验(SAT)和现场集成测试(SIT) | Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) |
| IEC/TR 61660-3-2000 | 电厂与变电站直流辅助设施中的短路电流 第3部分:计算举例 | Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 3: Examples of calculations |
| IEC/TR 61838-2001 | 核电厂 对安全重要的仪器仪表和控制功能元件 分类用概率统计安全评估的使用 | Nuclear power plants - Instrumentation and control functions important for safety - Use of probabilistic safety assessment for the classification |
| IEC/TR 61963-2005 | 核电厂.主控室.控制室设计方面IEC 60964与类似标准的比较 | Nuclear power plants - Main control room - Comparison of IEC 60964 to similar standards on control room design |
| IEC/TR 62096-2002 | 核电厂.仪表和控制.确定现代化指南 | Nuclear power plants - Instrumentation and control - Guidance for the decision on modernization |
| IEC/TR 62247-2003 | 核电厂.主控制室设计.IEC 60964-1989的应用回顾 | Nuclear power plants - Main control room design - A review of the application of IEC 60964 (1989) |
| IEC/TR3 61000-2-6-1995 | 电磁兼容性(EMC) 第2部分:环境 第6节:工厂供电中低频传导骚扰发射水平的评估 | Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
| ISO 10303-227-2005 | 工业自动化系统和集成.产品数据表示和交换.第227部分:应用协议:工厂空间布局 | Industrial automation systems and integration - Product data representation and exchange - Part 227: Application protocol: Plant spatial configuration |
| ISO 10397-1993 | 固定源排放 石棉厂排放物的测定 纤维计数测量法 | Stationary source emissions; determination of asbestos plant emissions; method by fibre count measurement |
| ISO 10753-1994 | 选煤厂 煤层共生物在水中易碎性的评价 | Coal preparation plant; assessment of the liability to breakdown in water of materials associated with coal seams |
| ISO 10816-5-2000 | 机械振动 在非旋转部件上测量和评定机器振动 第5部分:水力发电厂和泵站机组 | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 10981-2004 | 核燃料技术.后处理厂溶解器溶液中铀的测定.液相色谱法 | Nuclear fuel technology - Determination of uranium in reprocessing-plant dissolver solution - Liquid chromatography method |
| ISO 11482-1993 | 核燃料后处理厂二氧化钚取样导则 | Guidelines for plutonium dioxide (PuO<(Index)2>) sampling in a nuclear reprocessing plant |
| ISO 12222 Technical Corrigendum 1-2004 | 电影.16mm、35mm和65mm电影胶片上厂家印制的潜影标记.规范和尺寸.技术勘误1 | Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film - Specifications and dimensions; Technical Corrigendum 1 |
| ISO 12222-2000 | 电影 16mm、35mm和65mm电影胶片上厂家印制的潜影标记 规范和尺寸 | Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film - Specifications and dimensions |
| ISO 12576-1-2001 | 绝热 建筑物用绝热材料及制品 符合性控制体系 第1部分：工厂制造的产品 | Thermal insulation - Insulating materials and products for buildings; Conformity control systems - Part 1: Factory-made products |
| ISO 13464-1998 | 后处理厂溶解器料液中铀和钚的连续测定 使用K吸收边界和X射线荧光光谱联合法 | Simultaneous determination of uranium and plutonium in dissolver solutions from reprocessing plants - Combined method using K-absorption edge and X-ray fluorescence spectrometry |
| ISO 13705-2006 | 石油、石化和天然气工业.一般炼油厂火力加热器 | Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service |
| ISO 15664-2001 | 声学 开放式工厂的噪声控制设计规程 | Acoustics - Noise control design procedures for open plant |
| ISO 17332-2001 | 电影彩印胶片 35mm 电影彩印胶片上厂家印制的潜影标记信息 规范 | Cinematography - Manufacturer-printed latent image identification information for 35 mm motion-picture colour-print film - Specifications |
| ISO 17652-1-2003 | 焊接.与焊接和相关工艺有关的工厂底漆的试验.第1部分:一般要求 | Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements |
| ISO 17652-2-2003 | 焊接.与焊接和相关工艺有关的工厂底漆的试验.第2部分:工厂底漆的焊接特性 | Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers |
| ISO 17652-3-2003 | 焊接.与焊接和相关工艺有关的工厂底漆的试验.第3部分:热切割 | Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting |
| ISO 17652-4-2003 | 焊接.与焊接和相关工艺有关的工厂底漆的试验.第4部分:烟气排放 | Welding - Test for shop primers in relation to welding and allied processes - Part 4: Emission of fumes and gases |
| ISO 18414-2006 | 按属性验收取样规程.基于控制出厂质量信用原则的验收零取样系统 | Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality |
| ISO 19001-2002 | 实验室诊断医疗设备.生物着色用实验室诊断试剂生产厂商提供的信息 | In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology |
| ISO 21238-2007 | 核能.核燃料技术.测定核电厂产生的低和中级放射性废物包放射性的换算因子法 | Nuclear energy - Nuclear fuel technology - Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants |
| ISO 2633-1974 | 生产厂房和仓库楼面荷载的确定 | Determination of imposed floor loads in production buildings and warehouses |
| ISO 3780-1983 | 道路车辆 世界制造厂商识别代码(WMI) | Road vehicles; World manufacturer identifier (WMI) code |
| ISO 4100-1980 | 道路车辆 世界零部件制造厂商识别代码(WPMI) | Road vehicles; World parts manufacturer identifier (WPMI) code |
| ISO 561-1989 | 选煤厂 图形符号 | Coal preparation plant; graphical symbols |
| ISO 5667-13-1997 | 水质 采样 第13部分:生活污水和水处理厂污水采样指南 | Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water treatment works |
| ISO 5667-7-1993 | 水质 采样 第7部分:锅炉厂水和蒸气冷凝水采样方法指南 | Water quality; sampling; part 7: guidance on sampling of water and steam in boiler plants |
| ISO 6258-1985 | 核电厂 抗震设计 | Nuclear power plants; Design against seismic hazards |
| ISO 6527-1982 | 核电厂 可靠性数据交换 一般指南 | Nuclear power plants; Reliability data exchange; General guidelines |
| ISO 7385-1983 | 核电厂 收集可靠性数据的质量保证导则 | Nuclear power plants; Guidelines to ensure quality of collected data on reliability |
| ISO 7919-5-2005 | 机械振动.通过旋转轴的测量评价机械振动.第5部分:水力发电厂和泵站机组 | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 8086-2004 | 乳品厂.卫生条件.检验通用指南和取样程序 | Dairy plant - Hygiene conditions - General guidance on inspection and sampling procedures |
| ISO 8107-1993 | 核电厂 可维修性 术语 两种语言版 | Nuclear power plants; maintainability; terminology |
| ISO 8196-2-2000 | 牛乳 牛乳分析间接法总准确度的定义和评定 第2部分:乳品厂检验室的校准和质量控制 | Milk - Definition and evaluation of the overall accuracy of indirect methods of milk analysis - Part 2: Calibration and quality control in the dairy laboratory |
| ISO 8297-1994 | 声学 为评定环境测定多声源工业厂房的声功率级 工程法 | Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method |
| ISO 924-1989 | 选煤厂 流程图编制原则和规范 | Coal preparation plant; principles and conventions for flowsheets |
| ISO 9463-1990 | 后处理厂硝酸料液 钚(Ⅵ)氧化后对钚的测定 分光光度法 | Nitric acid feed solutions from reprocessing plants; spectrophotometric determination of plutonium after oxidation to plutonium (VI) |
| ISO/TR 8357-1996 | 道路车辆 为车辆识别代码(VIN)系统和世界零部件制造厂商识别代码(WPMZ)分配世界制造厂商识别码(WMZ)的实施 | Road vehicles - Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicles identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes |
| ISO/TS 22595-1-2006 | 牙科.厂区面积设备.第1部分:吸入系统 | Dentistry - Plant area equipment - Part 1: Suction systems |
| 编号 | 中文名称 | 英文名称 |