| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| NF A49-703-1988 | 钢管.带状塑料外复层.卷绕 | (STEEL TUBE. EXTERNAL COATING PLASTIC BASED IN BANDS. APPLICATION BY WINDING UP.) |
| NF A84-419-1997 | 气焊设备.能承受最大检验设计气压为450巴的压缩和液化气用橡胶和塑料软管组件 | (Gas welding equipment. Rubber and plastic hoses assembled for compressed or liquified gases up to a maximum design pressure of 450 bar.) |
| NF A88-800-2003 | 塑料焊接人员.焊工资格检验.热塑焊接组件 | (Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies.) |
| NF B35-901-1983 | 试验室用塑料设备.圆柱形刻度试管 | (Plastics laboratory ware. Graduated measuring cylinders.) |
| NF B35-902-1983 | 试验室用塑料设备.烧杯 | (Plastics laboratory ware. Beakers.) |
| NF B35-903-1983 | 试验室用塑料设备.过滤漏斗 | (PLASTICS LABORATORY WARE. FILTER FUNNELS.) |
| NF B38-002-1995 | 玻璃织物增强型热固塑料.性能和试验方法 | (Textile-glass-reinforced thermosetting plastics. Properties and test methods.) |
| NF B38-302-1983 | 纺织玻璃纤维.增强塑料用的短丝玻璃纤维.粘合剂吞苯乙烯中溶解时间的测定 | (Textile glass chopped-strand mats for reinforcement of plastics. Determination of time of dissolution of the binder in styrene.) |
| NF C26-145-1-1998 | 电气应用的塑料膜的规范.第1部分:定义和一般要求 | (Specification for plastic films for electrical purposes. Part 1 : definitions and general requirements.) |
| NF C26-145-2-1998 | 电器用塑料薄膜规范.第2部分:试验方法 | (Specification for plastic films for electrical purposes. Part 2 : methods of test.) |
| NF C26-145-2/A1-2002 | 电器用塑料薄膜规范.第2部分:试验方法 | (Specification for plastic films for electrical purposes - Part 2 : methods of test.) |
| NF C26-145-3-1-1998 | 电工用塑料薄膜.第3部分:单项材料规范.第1活页:电容器用双轴取向聚丙烯(PP)薄膜 | (Plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : biaxially oriented polypropylene (PP) film for capacitors.) |
| NF C26-145-3-2-1998 | 电气应用的塑料膜的规范.第3部分:个体材料规范.第2章:用于电气绝缘的平衡双轴定向PEP薄膜的要求 | (Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : requirements for balanced biaxially oriented polyethylene terephtalate (PET) films used for electrical insulation.) |
| NF C26-145-3-3-1998 | 电器用途塑料膜规范.第3部分:个别材料规范.第3章:电气绝缘用PC膜要求 | (Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : requirements for polycarbonate (PC) films used for electrical insulation.) |
| NF C26-145-3-4-1995 | 电工用塑料薄膜规范.第3部分:各别材料规范.第4-6活页:电绝缘用聚酰亚胺薄膜要求 | (Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheets 4 to 6 : requirements for polyimide films used for electrical insulation.) |
| NF C26-145-3-7-1998 | 电气用塑料膜规范.第3部分:个体材料规范.第7章:电气绝缘用FEP膜的要求 | (Specification for plastic films for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for fluoroethylene-propylene (FEP) films used for electrical insulation.) |
| NF C26-148-2-1998 | 电器用途塑料膜规范.第3部分:个别材料规范.第2章:丙烯酸交叉链接橡胶热固聚酯膜带 | (Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : polyester films tapes with rubber thermosetting of acrylic crosslinked adhesives.) |
| NF C26-235-1-1994 | 电绝缘材料的液压稳定性的试验方法.第1部分:塑料薄膜 | (Method of test for the hydrolic stability of electrical insulating materials. Part 1 : plastic films.) |
| NF C26-251-1980 | 绝缘材料的试验方法.电绝缘材料用塑料薄膜和塑料纸摩擦系数的测定方法 | (Methods of testing insulating materials. Method of test for coefficients of friction of plastic film and sheeting for use as electrical insulation.) |
| NF C31-094-2-1995 | 绕组线的封装.第4部分:试验方法.第2节:热固性塑料制成的锥形筒式供带盘容器 | (Packaging of winding wires. Part 4 : methods of test. Section 2 : containers made from thermoplastic material for taper barrelled delivery spools.) |
| NF C93-883-4-2003 | 纤维光学有源元件及器件.包装和接口标准.第4部分:PN 1 x 9塑料光学纤维无线电收发信机 | (Fibre optic ative components and devices - Package and interface standards - Part 4 : PN 1 x 9 plastic optical fibre transceivers.) |
| NF C96-022-20-2003 | 半导体器件.机械和气候试验方法.第20部分:塑料密封的SMDs抗湿气和钎焊热的综合影响 | (Semiconductor devices - Mechanical and climatic test methods - Part 20 : resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat.) |
| NF C96-022-31-2003 | 半导体器件.机械和气候试验方法.第31部分:塑料密封器件的易燃性(内部引起的) | (Semiconductor devices - Mechanical and climatic test methods - Part 31 : flammability of plastic-encapsulated devices (internally induced).) |
| NF C96-628-1-2000 | 频率控制和选则用表面安装的压电器件.标准外形和终端引线的连接.第1部分:塑料模压外壳外形 | (Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1 : plastic moulded enclosure outlines.) |
| NF D11-120-1988 | 家用丙烯酸塑料成品浴盆规范 | (SPECIFICATION FOR FINISHED BATHS FOR DOMESTIC PURPOSES MADE OF ACRYLIC MATERIAL. (EUROPEAN STANDARD EN 198).) |
| NF D25-101-1-2003 | 与食品接触的材料和物品.塑料.第1部分:塑料全淅出量的条件选择和试验方法 | (Materials and articles in contact with foodtsuffs - Plastics - Part 1 : guide to the selection of conditions and test methods for overall migration.) |
| NF D25-101-10-2003 | 接触食品的材料和物品.塑料.第10部分:迁移到橄榄油中的总量的试验方法(不完全萃取橄榄油时使用的改良法) | (Materials and articles in contact with foodstuffs - Plastics - Part 10 : test methods for overall migration into olive oil (modified method for use in cases where incomplete extraction of olive oil oc) |
| NF D25-101-11-2003 | 接触食品的材料和物品.塑料.第11部分:迁移到C-14合成甘油三酯混合物中的总量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 11 : test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides.) |
| NF D25-101-12-2003 | 与食品接触的材料和物品.塑料.第12部分:低温下塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 12 : test methods for overall migration at low temperatures.) |
| NF D25-101-13-2003 | 接触食品的材料和物品.塑料.第13部分:高温下总迁移量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 13 : test method for overall migration at high temperatures.) |
| NF D25-101-14-2003 | 接触食品的材料和物品.塑料.第14部分:用试验媒体异辛烷和95%酒精对有意接触油脂食品的塑料的总迁移量进行的 | (Materials and articles in contact with foodstuffs - Plastics - Part 14 : test methods for substitute tests for overall migration from plastics intended to come into contact with fatty foodstuffs using) |
| NF D25-101-15-2003 | 接触食品的材料和物品.塑料.第15部分:通过快速萃取到异辛烷和95%酒精中的方法对迁移到模拟油脂食品中的总量 | (Materials and articles in contact with foodstuffs - Plastics - Part 15 : alternative test methods to migration into fatty food simulants by rapid extraction into iso-octane and/or 95 % ethanol.) |
| NF D25-101-2-2003 | 与食品接触的材料和物品.塑料.第2部分:全浸渍在橄榄油中塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 2 : test methods for overall migration into olive oil by total immersion.) |
| NF D25-101-3-2003 | 与食品接触的材料和物品.塑料.第3部分:全浸渍在液态食品中塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 3 : test methods for overall migration into aqueous food simulants by total immersion.) |
| NF D25-101-4-2003 | 与食品接触的材料和物品.塑料.第4部分:全浸渍在电解池中塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 4 : test methods for overall migration into olive oil by cell.) |
| NF D25-101-5-2003 | 与食品接触的材料和物品.塑料.第5部分:全浸渍在水食品样品中塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 5 : test methods for overall migration into aqueous food simulants by cell.) |
| NF D25-101-6-2003 | 与食品接触的材料和物品.塑料.第6部分:利用袋全浸渍在橄榄油中塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 6 : test methods for overall migration into olive oil using a pouch.) |
| NF D25-101-7-2003 | 与食品接触的材料和物品.塑料.第7部分:利用袋全浸渍在液态食品中塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 7 : test methods for overall migration into aqueous food simulants using a pouch.) |
| NF D25-101-8-2003 | 与食品接触的材料和物品.塑料.第8部分:利用颗粒填充橄榄油中塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 8 : test methods for overall migration into olive oil by article filling.) |
| NF D25-101-9-2003 | 与食品接触的材料和物品.塑料.第9部分:利用颗粒填充液态食品中塑料全淅出量的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Part 9 : test methods for overall migration into aqueous food simulants by article filling.) |
| NF D25-113-2003 | 与食物接触的材料和物品.塑料.脂肪接触测定的试验方法 | (Materials and articles in contact with foodstuffs - Plastics - Test methods for the determination of fatty contact.) |
| NF D25-300-2003 | 接触食品的材料和物品.塑料.为了选择迁移测试的适当温度,测定在微波炉或普通炉加热过程中塑料和食品接触时 | () |
| NF D36-113-1-2001 | 使用商用丙烷,商用丁烷和蒸汽相混合物的橡胶和塑料管件和软管组件和配件.第1部分:橡胶,塑料管件和软管的要 | (Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase - Part 1 : requirements for rubber and plastics tubing and ho) |
| NF D63-002-1999 | 成卷墙纸.精制墙纸,墙面用乙烯树脂和塑料墙面饰层规范. | (Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings.) |
| NF E29-591-3-1998 | 铜和铜合金.管道配件.第3部分:用于塑料管的压缩终端配件 | (COPPER AND COPPER ALLOYS. PLUMBING FITTINGS. PART 3 : FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES. (EUROPEAN STANDARD EN 1254-3).) |
| NF E48-087-1993 | 线增强橡胶和塑料软管和组件.挠性水压脉冲试验 | (RUBBER AND PLASTICS HOSE AND ASSEMBLIES WITH WIRE REINFORCEMENTS. HYDRAULIC IMPULSE TEST WITH FLEXING. (EUROPEAN STANDARD EN 26802).) |
| NF E48-088-1999 | 橡胶和塑料软管组件.液压脉冲弯曲试验(半Ω 型试验) | (Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test).) |
| NF E49-051-1973 | 气压传动的连接.螺纹连接管.金属和塑料管 | (COUPLING FOR PNEUMATIC TRANSMISSIONS.SCREWED COUPLINGS-METAL AND PLASTIC PIPES) |
| NF E55-092-1970 | 办公机械.纸色带或塑料色带用的中心线的尺寸 | (OFFICE MACHINES - DIMENSIONS OF A CORE FOR PAPER OR PLASTIC PRINTING RIBBONS.) |
| NF E63-600-1997 | 橡胶和塑料机械.注模机.安全要求 | (Rubber and plastics machines - Injection moulding machines - Safety requirements.) |
| NF E63-600/A1-2000 | 橡胶和塑料机.注模机的安全要求 | (Rubber and plastics machines - Injection moulding machines - Safety requirements.) |
| NF E63-605-1995 | 橡胶和塑料机械.安全.空心产品用吹模机械.设计和建筑要求 | (RUBBER AND PLASTICS MACHINES. SAFETY. BLOW MOULDING MACHINES INTENTED FOR THE PRODUCTION OF HOLLOW ARTICLES. REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION. (EUROPEAN STANDARD EN 422).) |
| NF E63-606-1994 | 橡胶和塑料机械.压缩和转化制模机.设计的安全要求(欧洲标准EN289) | (RUBBER AND PLASTICS MACHINERY. COMPRESSION AND TRANSFER MOULDING PRESSES. SAFETY REQUIREMENTS FOR THE DESIGN. (EUROPEAN STANDARD EN 289).) |
| NF E63-607-1-1997 | 橡胶和塑料机械.挤压机和压出流水线.第1部分:挤压机的安全要求(欧洲标准EN 1114-1) | (RUBBER AND PLASTICS MACHINES. EXTRUDERS AND EXTRUSION LINES. PART 1 : SAFETY REQUIREMENTS FOR EXTRUDERS. (EUROPEAN STANDARD EN 1114-1).) |
| NF E63-607-2-1998 | 橡胶和塑料机械.挤压机和压出流水线.第2部分:冲模表面造粒机的安全要求(欧洲标准EN 1114-2) | (RUBBER AND PLASTICS MACHINES. EXTRUDERS AND EXTRUSION LINES. PART 2 : SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS. (EUROPEAN STANDARD EN 1114-2).) |
| NF E63-607-3-2001 | 橡胶和塑料机.挤压机和挤压线.第3部分:撤下来的安全要求 | (Rubber and plastics machines - Extruders and extrusion lines - Part 3 : safety requirements for haul-offs.) |
| NF E63-608-1996 | 橡胶和塑料加工机械.双辊研磨机.安全要求(欧洲标准EN 1417) | (RUBBER AND PLASTICS MACHINES. TWO ROLL MILLS. SAFETY REQUIREMENTS. (EUROPEAN STANDARD EN 1417).) |
| NF E63-609-2-2001 | 橡胶和塑料机.粉碎机.第2部分:多芯铰线的安全要求 | (Rubber and plastics machines - Size reduction machines - Part 2 : safety requirements for strand pelletisers.) |
| NF E63-609-3-2001 | 橡胶和塑料机械.粉碎机.第3部分:粉碎机的安全要求 | (Rubber and plastics machines - Size reduction machines - Part 3 : safety requirements for shredders.) |
| NF E63-610-2001 | 橡胶和塑料机.内混合器.安全要求 | (Rubber and plastics machines - Internal mixers - Safety requirements.) |
| NF E63-611-2000 | 橡胶和塑料机器.轮压机.安全要求 | (Rubber and plastics machines - Calenders - Safety requirements.) |
| NF E63-612-1-1998 | 橡胶和塑料机械.反应铸模机械.第1部分:计量和混合元件的安全要求 | (RUBBER AND PLASTICS MACHINES. REACTION MOULDING MACHINES. PART 1 : SAFETY REQUIREMENTS FOR METERING AND MIXING UNITS. (EUROPEAN STANDARD EN 1612-1).) |
| NF E63-612-2-2000 | 橡胶和塑料机器.反应注模机.第2部分:反应注模机的安全要求 | (Rubber and plastics machines - Reaction moulding machines - Part 2 : safety requirements for reaction moulding plant.) |
| NF F01-281-1989 | 铁路车辆.纤维加强热固塑料材料 | (RAILWAY ROLLING STOCK. FIBRE REINFORCED THERMOSETING PLASTICS.) |
| NF G37-001-2003 | 橡胶或塑料涂层织物.术语 | (Rubber- or plastics-coated fabrics - Terminology.) |
| NF G37-102-1-1998 | 橡胶或塑料涂层织物. 卷曲特性的测定.第1部分:长度,宽度和净质量的测定(欧洲标准 EN ISO 2286-1) | (Rubber- or plastics-coated fabrics. Determination of roll characteristics. Part 1 : methods for determination of length, width and net mass.) |
| NF G37-102-2-1998 | 橡胶或塑料涂层织物.卷曲特性的测定. 第2部分:每单位面积的总质量的测定方法.包被每单位面积质量和底层每单 | (Rubber- or plastics-coated fabrics. Determination of roll characteristics. Part 2 : methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate.) |
| NF G37-102-3-1998 | 橡胶或塑料涂层织物.卷曲特性的测定. 第3部分:厚度的测定方法( 欧洲标准 EN ISO 2286-3) | (Rubber- or plastics-coated fabrics. Determination of roll characteristics. Part 3 : method for determination of thickness.) |
| NF G37-103-1998 | 橡胶或塑料涂层织物.拉伸强度和断裂伸长的测定 | (Rubber- or plastics-coated fabrics. Determination of tensile strength and elongation at break.) |
| NF G37-105-1-1998 | 橡胶或塑料涂覆织物.加速老化试验.第1部分:热老化 | (Rubber- or plastic- coated fabrics. Accelerated ageing tests. Part 1 : heat ageing.) |
| NF G37-105-2-2003 | 橡胶和塑料涂层织物.加速老化试验.第2部分:光和风化作用的物理老化 | (Rubber-or plastics-coated fabrics - Accelerated ageing tests - Part 2 : physical ageing : effect of light or weathering.) |
| NF G37-105-3-2003 | 橡胶或塑料涂层织物.加速老化试验.第3部分:环境老化 | (Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3 : environnement ageing.) |
| NF G37-106-1997 | 橡胶或塑料涂层织物.抗水渗透性测定.低压法 | (Rubber- or plastics coated fabrics. Determination of resistance to water penetration. Low pressure method.) |
| NF G37-107-2000 | 橡胶或塑料涂层织物.涂层粘附的测定 | (Rubber- or plastics-coated fabrics - Determination of coating adhesion.) |
| NF G37-111-1-1998 | 橡胶或塑料涂层织物.拉伸强度和断裂伸长的测定 | (Rubber- or plastics-coated fabrics. Low temperature tests. Part 1 : bending test.) |
| NF G37-111-2-1998 | 橡胶或塑料涂层织物.低温测试.第2部分:环圈上的冲击试验 | (Rubber- or plastics-coated fabrics. Low temperature tests. Part 2 : impact test on loop.) |
| NF G37-112-1980 | 橡胶或塑料涂层织物.抗臭氧的静态试验 | (Fabrics coated with rubber or plastic-static ozone resistance test.) |
| NF G37-114-1983 | 橡胶或塑料涂层织物.透气性试验 | (Fabrics coated with rubber or plastics. Gas permeability test.) |
| NF G37-115-1988 | 橡胶或塑料涂层织物.耐静力压入穿孔强度的测定 | (FABRIC COATED WITH RUBBERS OR PLASTICS. DETERMINATION OF STATIC PERFORATION STRENGTH.) |
| NF G37-116-1-1998 | 橡胶或塑料涂层织物.破裂强度的测定.第1部分:钢球法.(欧洲标准EN 12332-1) | (Rubber- or plastics- coated fabrics. Determination of bursting strength. Part 1 : steel ball method.) |
| NF G37-116-2-2003 | 橡胶或塑料涂层织物.破裂强度测定.第2部分:液压法 | (Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2 : hydraulic method.) |
| NF G37-117-1976 | 两面涂橡胶或塑料的织物.芯线效应测定 | (FABRICS COATED ON BOTH SIDES WITH RUBBER OR PLASTICS. MEASUREMENT OF THE WICK EFFECT.) |
| NF G37-119-1987 | 橡胶或塑料涂层织物.破坏强度的测定 | (Rubber or plastic coated fabrics. Measurement of out-of centre.) |
| NF G37-120-1980 | 橡胶或塑料涂层织物.抗挤压强度的测定 | (RUBBER OR PLASTICS-COATED FABRICS. DETERMINATION OF CRUSH RESISTANCE.) |
| NF G37-121-1999 | 橡胶或塑料涂层织物.耐磨强度的测定.第1部分:TABER研磨机 | (Rubber- or plastics-coated fabrics. Determination of abrasion resistance. Part 1 : Taber abrader.) |
| NF G37-122-1981 | 橡胶或塑料涂覆织物.水解稳定性 | (FABRICS COATED WITH RUBBER OR PLASTIC. HYDROLYTIC STABILITY .) |
| NF G37-128-1984 | 橡胶或塑料涂层织物.测力计对扯裂强度的测定 | (Plastics and rubber coated fabrics. Determination of tear resistance using a dynamometer.) |
| NF G37-128-2-1998 | 橡胶或塑料涂层织物.抗撕裂性的测定.第2部分:弹道摆锤方法(欧洲标准 EN ISO 4674-2) | (Rubber- or plastics-coated fabrics. Determination of tear resistance. Part 2 : ballistic pendulum method.) |
| NF G37-128-3-1998 | 橡胶或塑料涂层织物.断裂强度测定.第3部分:梯形法 | (Rubber- or plastics-coated fabrics. Determination of tear strength. Part 3 : trapezoidal method.) |
| NF G37-132-1988 | 橡胶或塑料涂层织物.柔软性试验.摆动方法 | (Rubber or plastics coated textile backings. Determination of the flexibility. Pendulum method.) |
| NF G37-133-1997 | 橡胶或塑料涂层织物.耐弯曲损伤测定 | (RUBBER- OR PLASTICS-COATED FABRICS. DETERMINATION OF RESISTANCE TO DAMAGE BY FLEXING. (EUROPEAN STANDARD EN ISO 7854).) |
| NF G37-136-2002 | 橡胶或塑料涂层织物.耐液体性能的测定 | (Rubber or plastic-coated fabrics - Determination of resistance to liquids.) |
| NF G40-006-1978 | 纺织工业设备.纺纱机.粗纱机用塑料纱管 | (TEXTILE MACHINERY AND ACCESSORIES. SPINNING MACHINES. FLYER BOBBINS FROM PLASTICS MATERIAL.) |
| NF H00-070-1983 | 液体运输包装.危险品运输用组合包装内部容器、混合包装金属或塑料桶.空气密封试验.操作方式 | (PACKAGING. PACKAGING FOR TRANSPORTING LIQUIDS. METAL OR PLASTIC DRUMS AND JERRYCANS,COMPOSITE PACKAGING,INTERIOR CONTAINERS OF COMBINED PACKAGING FOR THE TRANSPORT OF DANGEROUS MATERIALS. AIRTIGHTNESS TEST. PROCEDURE.) |
| NF H00-071-1986 | 液体运输包装.轻金属包装.金属或塑料包装.混合包装.液压试验.操作方式 | (PACKAGING FOR THE TRANSPORT OF LIQUIDS. LIGHT GAUGE METAL PACKAGING. METALIC OR PLASTIC PACKAGING. COMPOSITE PACKAGING WATER PRESSURE TEST. PROCEDURE.) |
| NF H31-363-1987 | 金属包袋.塑料细颈瓶用平预或锥形穿孔圆桶 | (METAL PACKAGING. FLAT OR TAPERED TOP CANS WITH HOLES FOR PLASTIC SPOUTS.) |
| NF H31-412-2001 | 包装.薄金属包装.插入式塑料闭塞物的孔径 | (Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures.) |
| NF H34-003-1973 | 塑料包装.水和蔬菜平行六面体包装.尺寸.规范.试验 | (PACKAGES MADE OF PLASTIC MATERIALS PARALLELEPIPEDAL PACKAGES FOR FRUIT AND VEGETABLES. DIMENSIONS,SPECIFICATIONS AND TESTS.) |
| NF H34-005-1987 | 塑料包装.开口或带嘴的大容量袋.扁平套或折叠式套.规范和试验 | (Plastic packaging. Large open-mouthed or valved sacks. Flat or folded hose. Specifications and tests.) |
| NF H34-008-1977 | 未增强塑料桶.检验卡式样 | (TUBS OF NON-REINFORCED PLASTIC. MODEL OF INSPECTION FORM.) |
| NF H34-015-1987 | 塑料包装.消费品塑料袋（工具袋和安全带袋除外）规范和试验 | (PLASTIC PACKAGING. BAGS FOR CONSUMER PRODUCTS (EXCEPT CARRIER AND SHOPPING BAGS). SPECIFICATIONS AND TESTS.) |
| NF H34-020-1989 | 塑料包装.水果和蔬菜重复使用的平行六面体包装.规范和试验 | (PLASTIC PACKAGING. RE-USABLE PARALLELEPIPEDAL PACKAGING FOR FRUIT AND VEGETABLES. SPECIFICATIONS AND TESTS.) |
| NF H34-025-2000 | 标称容量是20-225升的塑料容器用塞子和桶口 | (Plug/Bung closure systems for plastics containers with a nominal capacity of 20 I to 225 I.) |
| NF H34-026-2000 | 塑料鼓形桶.标称容量为20-120升的非移动头环形十字交叉鼓形桶 | (Plastics drums - Non-removable head (light head) cicular cross-section drums with a nominal capacity of 20 I to 120 I.) |
| NF H34-027-2000 | 塑料鼓形桶.标称容量为210升220升和225升的非移动头鼓形桶 | (Plastics drums - Non-removable head (tight head) drums with a nominal capacity of 210 l, 220 l and 225 l.) |
| NF H34-032-1-2000 | 运输包装.可再使用的硬质塑料配送盒.第1部分:一般用途应用 | (Transport packaging - Reusable, rigid plastics distribution boxes - Part 1 : general purpose application.) |
| NF H34-032-2-2000 | 运输包装.可再使用的硬质塑料配送盒.第2部分:试验用一般规范 | (Transport packaging - Reusable, rigid plastics distribution boxes - Part 2 : general specifications for testing.) |
| NF H34-037-2000 | 塑料汽油桶.托板尺寸为800mm x 1200mm,1000mm x 1200mm,1140mm x 1140mm的优选利用的20升和60升标称容量的 | (Plastics jerricans - Jerricans with a nominal capacity of 20 l a 60 l for optimal utilization of pallets sizes 800 mm x 1200 mm, 1000 mm x 1200 mm et 1140 mm x 1140 mm.) |
| NF H34-039-2000 | 塑料鼓形桶.标称容量是25升到220升的可移动头式鼓形桶 | (Plastics drums - Removable head (open head) drums with a nominal capacity of 25 I to 220 I.) |
| NF H34-050-1-2000 | 包装.柔性圆柱形塑料管.尺寸和公差 | (Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances.) |
| NF H34-090-2003 | 家庭废弃物收集用塑料袋.类型、要求和试验方法 | (Plastics sacks for household waste collection - Types, requirements and test methods.) |
| NF H34-092-2001 | 塑料包装.塑料冷冻袋.规范和试验方法 | (Packaging-Plastics - Plastics freezer bags - Specifications and testing methods.) |
| NF H35-024-1986 | 制瓶工业.塞紧或啮合的瓶盖用２６、２９、３２、３６、４４型的塑料瓶口.尺寸 | (Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of 26-39-32-36-44 diameters. Dimensions.) |
| NF H35-032-1972 | 制瓶工业.齿冠形瓶塞用２６型和２９型塑料瓶口 | (PLASTIC FINISHES,26 AND 29 FOR CROWN CORK.) |
| NF H35-036-1984 | 制瓶工业“香料”型塑料瓶螺纹瓶口尺寸 | (Bottling industry. Plastic screw finish. Parfumery type. Dimensions.) |
| NF H35-037-1987 | 制瓶工业.“药剂”型塑料瓶的螺纹瓶口.尺寸 | (BOTTLING INDUSTRY. PLASTIC SCREW FINISH. PHARMACY TYPE. DIMENSIONS.) |
| NF H35-090-1986 | 制瓶工业.食油专用塞或啮合瓶盖用２９／５１和３５／２５型塑料瓶口.尺寸 | (Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of diameter 29 and 35 mm, special for edible oil. Dimensions.) |
| NF H35-200-2003 | 硬质塑料容器.标称容量、满装容量和总容量的定义以及满装和总容量的测量 | (Rigid plastics containers - Definition of nominal, brimful and total capacity and measurement of brimful and total capacity.) |
| NF H35-203-2003 | 硬质塑料容器.排水能力测定方法 | (Rigid plastics containers - Method for determination of drainability.) |
| NF H35-204-2003 | 硬质塑料容器.尺寸、重量和体积公差规范 | (Rigid plastics containers - Specification of tolerance for dimensions, weight and volume.) |
| NF H47-101-1982 | 组合包装.危险品的塑料内包装和瓦楞纸板外包装物.机械、物理特性和试验 | (COMBINED PACKAGES. PLASTICS INTERNAL PACKAGING AND CORRUGATED FIBREBOARD EXTERNAL PACKAGING FOR DANGEROUS MATERIALS. MECHANICAL AND PHYSICAL PROPERTIES AND TESTING.) |
| NF L06-850-2001 | 航空航天系列.非金属材料.设计产品.塑料粒子.技术规范 | (Aerospace series - Non metallic materials - Projecting products - Plastic particles - Technical specification.) |
| NF L17-021-1998 | 航空航天系列.非金属材料.树脂,粘接剂,增强塑料,预浸渍.用液相色谱测定特性 | (AEROSPACE SERIES. NON-METALLIC MATERIALS. RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.) |
| NF L17-102-1988 | 航空工业.弹性塑料.人造橡胶.产品的识别和标志 | (AEROSPACE INDUSTRY. RUBBERS. MARKING AND IDENTIFICATION OF THE PRODUCTS.) |
| NF L17-103-1988 | 航空工业.弹性塑料.产品的包装和贮存条件 | (AEROSPACE INDUSTRY. RUBBERS. NON FITTED PRODUCTS. PACKAGING AND STORAGE CONDITIONS.) |
| NF L17-107-1985 | 航空工业.弹性塑料.分类.使用 | (ELASTOMERIC MATERIALS. CLASSIFICATION. USES.) |
| NF L17-120-1985 | 弹性塑料.丁二烯.丙烯腈.２０类.性能 | (Butadiene. Acrylonitrile rubbers. Class 20. Characteristics.) |
| NF L17-121-1985 | 弹性塑料.丁二烯.丙烯腈.２１类.性能 | (Butadiene. Acrylonitrile rubbers. Class 21. Characteristics.) |
| NF L17-123-1985 | 弹性塑料.丁二烯.丙烯腈.２３类.性能 | (Butadiene. Acrylonitrile rubbers. Class 23. Characteristics.) |
| NF L17-124-1985 | 弹性塑料.丁二烯.丙烯腈.２４类.性能 | (Butadiene. Acrylonitrile rubbers. Class 24. Characteristics.) |
| NF L17-131-1985 | 弹性塑料.聚氯丁二烯.引类.性能 | (Polychloroprene rubbers. Class 31. Characteristics.) |
| NF L17-132-1985 | 弹性塑料.聚氯丁二烯.３２类.性能 | (Polychloroprene rubbers. Class 32. Characteristics.) |
| NF L17-160-1985 | 弹性塑料.碳氟.６０类.性能 | (Fluoro carbon rubbers. Class 60. Characteristics.) |
| NF L17-162-1988 | 弹性塑料.卤氟.６２类.性能 | (AEROSPACE INDUSTRY. HALOGENO CARBON RUBBERS. CLASS 62. CHARACTERISTICS.) |
| NF L17-163-1988 | 弹性塑料.硅氟.６３类.性能 | (AEROSPACE INDUSTRY. FLUORO SILICONE RUBBERS. CLASS 63. CHARACTERISTICS.) |
| NF L17-164-1987 | 弹性塑料.碳氟.６４类.性能 | (Aerospace industry. Fluorocarbon rubbers. Class 64. Charateristics.) |
| NF L17-403-2002 | 航空航天系列.纤维增强塑料.未老化材料测试前整理的标准程序 | (Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials.) |
| NF L17-409-1998 | 航空航天系列.碳素纤维增强塑料.单向分层.垂直于纤维方向的拉伸试验 | (Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction.) |
| NF L17-410-1996 | 航空和航天.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验 | (Aerospace series. Carbon fibre reinforced plastics. Unidirectioneal laminates. Tensile test parallel to the fibre direction.) |
| NF L17-458-1996 | 航空和航天.纤维增强塑料.试验液体影响的测定 | (Aerospace series. Fibre reinforced plastics. Determination of the action of test fluids.) |
| NF L17-459-1996 | 航空和航天.纤维增强塑料.通过浸入测定吸水量 | (Aerospace series. Fibre reinforced plastics. Determination of water absorption by immersion.) |
| NF L17-701-1989 | 航空和航空系列.玻璃纤维增强塑料.试验方法表观层间剪切力的测定 | (AEROSPACE SERIES. GLASS FIBRE REINFORCED PLASTICS. TEST METHOD. DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH. (EUROPEAN STANDARD EN 2377).) |
| NF L17-703-1998 | 航空航天系列.玻璃纤维增强塑料.挠性试验.三点弯曲试验 | (Aerospace series. Glass fibre reinforced plastics. Flexural test. Three point bend method.) |
| NF L17-704-1998 | 航空航天系列.玻璃纤维增强塑料.拉伸试验 | (Aerospace series. Glass fibre reinforced plastics. Tensile test.) |
| NF L18-510-1969 | 透明塑料板 | (SHEETS MADE OF TRANSPARENT PLASTICS MATERIAL.) |
| NF L19-103-1992 | 航空航天系列.复合的非金属热固性塑料浸渍材料.带管状心的蜂窝材料.技术规格.一般要求 | (AREROSPACE SERIES. COMPOSITE AND NON-METALLIC THERMOPLASTIC IMPREGNATED MATERIALS. HONEYCOM MATERIALS WITH TUBULAR CELLS. TECHNICAL SPECIFICATION. GENERAL REQUIREMENTS.) |
| NF L54-191-1988 | 航空器材.后部非密封的闭锁的,带塑料箱的,使用温度55℃-175℃的密封矩形电接头 | (CONNECTORS,ELECTRICAL,RECTANGULAR,WITH SEALED AND NON SEALED REAR,PLASTIC SHELL,LOCKING DEVICE AND OPERATING TEMPERATURES. 55 DEGREES C TO 175 DEGREES C.) |
| NF M87-243-1-2003 | 石油和天然气工业.玻璃纤维增强塑料管.第1部分:词汇、符号、应用和材料 | (Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1 : vocabulary, symbols, applications and materials.) |
| NF M87-243-2-2003 | 石油和天然气工业.玻璃纤维增强塑料管系.第2部分:合格鉴定和制造 | (Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2 : qualification and manufacture.) |
| NF M87-243-3-2003 | 石油和天然气工业.玻璃纤维增强塑料管系.第3部分:系统设计 | (Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3 : system design.) |
| NF M87-243-4-2003 | 石油和天然气工业.玻璃纤维增强塑料管系.第4部分:制造、安装和运行 | (Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4 : fabrication, installation and operation.) |
| NF M88-302-1976 | 增强塑料制公路油罐车.设计用符号 | (ROAD TANKERS IN REINFORCED PLASTIC. SYMBOLS USED FOR DESIGN.) |
| NF M88-310-1976 | 增强塑料制公路油罐车.技术数据单式样 | (ROAD TANKERS OF REINFORCED PLASTIC MATERIALS. MODELS FOR TECHNICAL DATA SHEETS.) |
| NF M88-514-1980 | 液态石油产品（二类）地下贮存用混合式贮罐.金属外贮罐.塑料内贮罐 | (DUAL MATERIAL TANKS FOR UNDERGROUND STORAGE OF LIQUID PETROLEUM PRODUCTS. STEEL EXTERIOR TANK. PLASTIC INTERIOR TANK.) |
| NF M88-552-1982 | 液态石油产品贮存用带增强塑料衬里的钢制新贮罐 | (NEW STEEL TANKS WITH REINFORCED PLASTIC LINING FOR STORING LIQUID PETROLEUM PRODUCTS.) |
| NF M88-553-1982 | 液态石油产品贮存用带增强塑料衬里的钢制旧贮罐 | (OPERATIONAL STEEL TANKS WITH REINFORCED PLASTIC LINING FOR STORAGE OF LIQUID PETROLEUM PRODUCTS.) |
| NF M88-555-1-1997 | 玻璃增强塑料(GRP)制地下油罐.非压力储存液化石油基燃油用卧式圆柱形油罐.第1部分:单壁罐的要求和试验方法 | (Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 1 : requirements and test methods for single wall tanks.) |
| NF M88-555-2-1997 | 玻璃增强塑料(GRP)制地下油罐.非压力储存液化石油基燃油用卧式圆柱形油罐.第2部分:单壁罐的运输、装卸、储 | (Underground tanks of glass-reinforced plastics (GRP). Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels. Part 2 : transport, handling, storage and installation of single wall tanks.) |
| NF M88-557-1-2003 | 地上用玻璃纤维增强塑料槽罐和容器.第1部分:原材料.规格条件和验收条件 | (GRP tanks and vessels for use above ground - Part 1 : raw materials - Specification conditions and acceptance conditions.) |
| NF M88-560-1986 | 储罐.家用燃料油地上室内塑料贮罐及其附件.设计.检验 | (Storage tanks. Plastics tanks for above ground storage of domestic fuel oil. Design. Inspection.) |
| NF P16-351-1998 | 塑料.民用机械用亚地表地下塑料管道系统.规范 | (Plastics. Plastics piping system for civil engineering subsoil drainage. Specification.) |
| NF P16-352-1-1998 | 非压力地下管道和废水用塑料管道系统.非塑化聚(乙烯,氯乙烯)(PVC-D).第1部分:管道规范,配件和系统 | (Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Part 1 : specifications for pipes, fittings and the system.) |
| NF P16-357-1-1997 | 无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范 | (Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Part 1 : specifications for pipes, fittings and the system.) |
| NF P16-357-1/A1-2002 | 无压地下排水系统用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统的规范 | (Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.) |
| NF P16-358-1-2001 | 地下和地上排水和排污用塑料压力管道系统.未增塑聚氯乙烯(PVC-U).第1部分:管道元件和系统规范 | (Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for piping components and the system.) |
| NF P16-360-2002 | 塑料管道系统.无压地下排水系统用管道系统.耐热循环和外部负载的试验方法 | (Plastics piping systems - Piping systems for underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.) |
| NF P16-361-3-1997 | 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第3部分:配件 | (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 3 : fittings.) |
| NF P16-361-5-1997 | 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第5部分:接头的适用性 | (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.) |
| NF P16-361-6-1997 | 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第6部分:安装实施规程 | (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 6 : practices for installation.) |
| NF P16-364-1-2003 | 地下非压力排水和污水管网更新用塑料管道系统.第1部分:总则 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general.) |
| NF P16-364-3-2003 | 地下非压力排水和污水管网更新用塑料管道系统.第3部分:紧配合管用衬层 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage network - Part 3 : lining with close-fit pipes.) |
| NF P16-364-4-2003 | 地下非压力排水和污水网用塑料管道系统.第4部分:现场固化管用的管衬 | (Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.) |
| NF P36-411-1-2000 | 地上外部用塑料雨水管道系统.第1部分:非塑化聚氯乙烯(PVC-U)管道系统.第1部分:管,配件和系统规范 | (Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for pipes, fittings and the system.) |
| NF P38-301-1-1998 | 透光塑料单层屋顶.第1部分:一般要求和试验方法 | (Light transmitting profiled plastic sheeting for single skin roofing. Part 1 : general requirements and test methods.) |
| NF P38-301-2-1999 | 单层屋顶用透光异型塑料板.第2部分:玻璃纤维增强聚酯板试验方法和特殊要求 | (Light transmitting profiled plastic sheeting for single skin roofing. Part 2 : specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP).) |
| NF P38-301-3-1998 | 透光塑料单层屋顶.第3部分:PVC片的试验方法和特殊要求(欧洲标准EN 1013-3) | (Light transmitting profiled plastic sheeting for single skin roofing. Part 3 : specific requirements and test methods for sheets of polyvinyl chloride (PVC).) |
| NF P38-301-4-2000 | 单层屋顶用透光异型塑料板.第4部分:聚碳酸酯薄板的特殊要求、试验方法和性能 | (Light transmitting profiled plastic sheeting for single skin roofing - Part 4 : specific requirements, test methods and performance of polycarbonate (PC) sheets.) |
| NF P38-301-5-2000 | 单层屋顶用透光异型塑料板.第5部分:聚甲基丙烯酸甲酯薄板的特殊要求、试验方法和性能 | (Light transmitting profiled plastic sheeting for single skin roofing - Part 5 : specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets.) |
| NF P38-402-1985 | 屋顶和护板.塑料.玻璃纤维增强半透明聚酯加肋板.尺寸特性 | (TRANSLUCENT GLASS FIBRE REINFORCED RIBBED POLYESTER SHEETS. DIMENSIONAL CHARACTERISTICS.) |
| NF P38-601-1963 | 屋顶.塑料.玻璃纤瑗增强聚酯波形板.取样.批量验收或退货 | (ROOFING. PLASTIC. CORRUGATED SHEETS IN GLASS REINFORCED PLASTIC. SAMPLING. BATCH ACCEPTANCE AND REJECTION.) |
| NF P62-203-1-1993 | DTU 53.2.建筑工程.塑料地面覆盖物.第1部分:技术规范 | (DTU 53.2 - Building works - Plastic floor coverings - Part 1 : technical specifications.) |
| NF P62-203-2-1993 | DTU 53.2.建筑工程.私人合同.塑料地面覆盖物.第2部分:特殊条款 | (DTU 53.2 - Building works - Private contracts - Plastic floor coverings - Part 2 : special clauses.) |
| NF P62-501-1997 | 弹性地板覆盖物.泡沫塑料衬里上的板材和装饰性油毡规范(欧洲标准EN 686) | (RESILIENT FLOOR COVERINGS. SPECIFICATION FOR PLAIN AND DECORATIVE LINOLEUM ON A FOAM BACKING. (EUROPEAN STANDARD EN 686).) |
| NF P75-406-2002 | 建筑物用的绝热制品.工厂制作的聚亚氨酯(PUR)硬质泡沫塑料产品.规范 | (Thermal insulation products for buildings - Factory made rigid polyurethane foam (PUR) products - Specification.) |
| NF P84-100-2001 | 防水软板.尺寸稳定性测定.第2部分:屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of dimensional stability - Part 2 : plastic and rubber sheets for roof waterproofing.) |
| NF P84-105-2001 | 防水软板.屋顶防水用沥青、塑料和橡胶薄板.长期暴露在高温下的人工老化法 | (Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature.) |
| NF P84-112-2002 | 防水软板.耐臭氧性测定.屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing.) |
| NF P84-113-2001 | 防水软板.屋顶防水用塑料和橡胶薄板.暴露于包括水的液态化合物的方法 | (Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water.) |
| NF P84-118-2000 | 防水用柔性薄板.屋面防水用沥青、塑料和橡胶薄板.水密性测定 | (Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness.) |
| NF P84-119-2000 | 防水用挠性薄板.屋面防水用沥青、塑料和橡胶薄板.水蒸气透过性能测定 | (Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties.) |
| NF P84-121-2-2001 | 防水软板.抗撕裂性测定.第2部分:屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2 : plastic and rubber sheets for roof waterproofing.) |
| NF P84-122-2-2001 | 防水软板.拉伸性能测定.第2部分:屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of tensile properties - Part 2 : plastic and rubber sheets for roof waterproofing.) |
| NF P84-125-2-2000 | 防水用挠性薄板.接缝耐剥离性测定.第2部分:屋面防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2 : plastic and rubber sheets for roof waterproofing.) |
| NF P84-126-2-2000 | 防水用挠性薄板.接缝耐剪切性测定.第2部分:屋面防水用塑料和橡胶薄板 | (flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2 : plastics and rubber sheets for roof waterproofing.) |
| NF P84-127-2-2001 | 防水软板.长度、宽度和平直度的测定.第2部分:屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2 : plastic and rubber sheets for roof waterproofing.) |
| NF P84-128-2-2001 | 防水软板.厚度和每单位面积质量的测定.第2部分:屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2 : plastic and rubber sheets for roof waterproofing.) |
| NF P84-129-2-2001 | 防水软板.外观缺陷的测定.第2部分:屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of visible defects - Part 2 : plastic and rubber sheets for roof waterproofing.) |
| NF P84-130-2001 | 防水软板.屋顶防水用沥青、塑料和橡胶薄板.耐冲击性测定 | (Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact.) |
| NF P84-131-2001 | 防水软板.屋顶防水用沥青、塑料和橡胶薄板.耐静荷载的测定 | (Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading.) |
| NF P84-134-2002 | 防水柔性板.屋顶防水用的沥青,塑料和橡胶板.取样规则 | (Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling.) |
| NF P84-136-2002 | 防水软板.屋面防水用沥青、塑料和橡胶薄板.防冰雹的测定 | (Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of hail resistance.) |
| NF P84-604-2001 | 防水软板.低温时测定弯曲性能.第5部分:屋顶防水用塑料和橡胶薄板 | (Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5 : plastic and rubber sheets for roof waterproofing.) |
| NF P85-304-1976 | 人造橡胶或塑料胶泥或预成型胶泥.标志.供应.贮存 | (RUBBER OR PLASTIC OR PREFORMED JOINT SEALANTS,MARKING,DELIVERY,STOCKING.) |
| NF P98-587-1993 | 道路设备.交通永久标志.整体塑料标志柱的特性,性能和试验 | (ROAD EQUIPMENT. PERMANENT SIGNING OF TRAFFIC. CHARACTERISTICS, PERFORMANCES AND TESTING FOR PLASTIC MONOLITHIC MARKER POSTS.) |
| NF P98-588-1996 | 道路设备.指导交通的常用方式.岔路信号用塑料导向器叶片装置:特性和规范 | (ROAD EQUIPMENT. PERMANENT MEANS OF GUIDING TRAFFIC. PLASTIC GUIDE VANE DEVICES FOR SIGNALLING FOR SIGNALLING DIVERGENT ROADS : CHARACTERISTICS AND SPECIFICATIONS.) |
| NF P98-589-1993 | 道路设备.交通永久标志.塑料路标的特性、性能和试验 | (ROAD EQUIPMENT. PERMANENT SIGNING OF TRAFFIC. CHARACTERISTICS, PERFORMANCES AND TESTING FOR PLASTIC MILESTONES.) |
| NF R14-601-2000 | 道路车辆.刚性塑料安全玻璃材料试验 | (Road vehicles - Tests for rigid plastic safety glazing materials.) |
| NF R80-001-1980 | 塑料.软、硬塑料产品修理 | (Plastics. Division into rigid products and flexible products.) |
| NF R80-101-1980 | 塑料.紧固后稳定性试验.扭力板手法 | (Plastics. Testing of behaviour under clamping. Torque wrench method.) |
| NF R80-501-1980 | 软塑料和软微孔塑料.易脏特性 | (FLEXIBLE PLASTICS AND FLEXIBLE CELLULAR PLASTICS. STAINING CAPABILITY.) |
| NF R81-008-1980 | 微孔塑料.可选择性 | (CELLULAR PLASTICS. SELECTION CRITERIA.) |
| NF R81-009-1980 | 微孔塑料.硬产品或软产品和半硬产品分类方法 | (Cellular plastics. Method for grading products into rigid, flexible and semi-rigid categories.) |
| NF R81-101-1980 | 硬微孔塑料.流体通过测定尺寸变化 | (Rigid cellular plastics. Determination of dimensional variations on immersion in fluids.) |
| NF R81-301-1980 | 带皮软微孔塑料.刮平试验 | (Flexible cellular plastics with skin. Scratching test.) |
| NF R81-302-1980 | 带皮软微孔塑料.冷却脆裂试验.重物坠落试验 | (Flexible cellular plastics with skin. Cold brittleness test. Falling weight test.) |
| NF R81-303-1982 | 带皮软微孔塑料.汽车制造用耐磨强度 | (FLEXIBLE CELLULAR PLASTICS WTIH SKIN. RESISTANCE TO RUBBING FOR AUTOMOBILE CONSTRUCTION.) |
| NF R81-304-1982 | 带皮软微孔塑料.汽车制造试验用样块 | (FLEXIBLE CELLULAR PLASTICS WITH SKIN. SAMPLE BLOCK FOR TEST PURPOSES FOR AUTOMOBILE CONSTRUCTION.) |
| NF R81-305-1982 | 带皮软微孔塑料.人造光（氙灯）下汽车制造用塑料皮老化试验 | (FLEXIBLE CELLULAR PLASTICS WITH SKIN. SKIN AGEING TEST UNDER ARTIFICIAL LIGHT (XENON LAMPS) FOR AUTOMOBILE CONSTRUCTION.) |
| NF R82-101-1980 | 硬、软塑料.储存和未储存产品接触时的表面状态 | (Rigid and flexible plastics. Effect on the appearance contact with products used for storage and removal from storage.) |
| NF R83-001-1980 | 硬塑料.可选择性 | (RIGID PLASTICS. SELECTION CRITERIA.) |
| NF R83-101-1982 | 硬塑料.用汽车制造中的喷丸处理测定耐磨强度 | (RIGID PLASTICS. RESISTANCE TO WEAR BY SHOT-BLASTING FOR AUTOMOBILE CONSTRUCTION.) |
| NF R84-001-1980 | 软塑料.可选择特性 | (FLEXIBLE PLASTICS. SELECTION CRITERIA.) |
| NF R84-101-1980 | 软塑料.放在热环境之后表面稳定性 | (Flexible plastics. Appearance stability after exposure to heat.) |
| NF S51-205-1984 | 儿童用塑料卷尖笔.安全要求和试验 | (CHILDREN`S FOLT-TIP PENS. SAFETY REQUIREMENTS AND TESTS.) |
| NF S61-113-2003 | 消防水龙带.橡胶和塑料制吸入软管和软管组件 | (Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies.) |
| NF S90-230-1978 | 外科医疗器械.输血器械.血及其制品用软塑料简式囊的尺寸和物理性能 | (MEDICAL AND SURGICAL EQUIPMENT. TRANSFUSION APPARATUS FOR MEDICAL USE. PHYSICAL AND DIMENSIONAL PROPERTIES OF SIMPLE FLEXIBLE PLASTIC BAGS FOR BLOOD AND ITS DERIVATIVES.) |
| NF S90-231-1978 | 外科医疗器械.医用输血器械.血及其制品用软塑料简式囊的尺寸和物理特性 | (MEDICAL AND SURGICAL EQUIPMENT. TRANSFUSION APPARATUS FOR MEDICAL USE. PHYSICAL AND DIMENSIONAL PROPERTIES OF MULTIPLE FLEXIBLE PLASTIC BAGS FOR BLOOD AND ITS DERIVATES.) |
| NF S90-444-1987 | 外科医疗器械.外科植入物.局部和全部髋关节修复术.第2部分: 由金属和塑料材料制成的关节面 | (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. PARTIAL AND TOTAL HIP JOINT PROSTHESES. PART 2 : BEARING SURFACES MADE OF METALLIC AND PLASTICS MATERIALS.) |
| NF S91-133-1995 | 牙科用旋转器具.柄.第2部分:塑料柄 | (Dental rotary instruments. Shanks. Part 2 : shanks made of plastics.) |
| NF S93-115-1993 | 注射容器及附件.第6部分:注射瓶用铝-塑料瓶盖 | (Injection contrainers for injectable and accessories. Part 6 : caps made of aluminium-plastics combinations for injection vials.) |
| NF S93-126-1993 | 医用输液设备.第7部分:铝-塑料合成制输液瓶盖 | (Infusion equipment for medical use. Part 7 : caps made of aluminium-plastics combinations for infusion bottles.) |
| NF S98-051-5-1999 | 要消毒的医疗设备用包装材料和系统.第5部分:加热封闭和可自封闭的纸及塑料薄膜结构的袋和卷轴.要求和试验方 | (Packaging materials and systems for medical devices which are to be sterilized - Part 5 : heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods.) |
| NF T25-008-2001 | 塑料.增强纤维.短切原丝.松密度的测定 | (Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density.) |
| NF T30-084-2003 | 色漆、清漆和塑料.非挥发物质含量的测定 | (Paints, varnishes and plastics - Determination of non-volatile matter content.) |
| NF T30-700-1983 | 涂料.厚塑料贴面.技术条件 | (Paints. Thick plastics coatings. Specifications.) |
| NF T30-701-1983 | 涂料.厚塑料贴面.防水渗透性能的测定 | (Paints. Thick plastics coatings. Retardation of dripping water diffusion.) |
| NF T30-702-1983 | 涂料.厚塑料贴面.气候因素作用上附着力变化的测定 | (Paints. Thick coatings. Resistance of adhesiveness to artificial weathering.) |
| NF T30-704-1983 | 涂料.厚塑料贴面.涂料起泡的敏感性试验和水蒸气传播测量 | (Paints. Thick plastics coatings. Test for blister formation under water vapour diffusion.) |
| NF T30-705-1983 | 涂料.厚塑料贴面.强碱作用下贴面性能的测定 | (Paints. Thick plastics coatings. Determination of behaviour of coating applied to alkaline substrate.) |
| NF T30-706-1983 | 涂料.厚塑料贴面.对水的敏感性测定.剥皮试验 | (Paints. Thick plastics coatings. Determination of the sensitivity to water. Peel test.) |
| NF T30-708-1983 | 涂料.厚塑料贴面.试验取样的制备.产品的应用 | (PAINTS. THICK PLASTICS COATINGS. PREPARATION OF TEST PIECES. APPLICATION OF PRODUCTS.) |
| NF T31-310-1-2003 | 颜料和填充剂.扩散方法和在塑料中可扩散性的评估.第1部分:概述 | (Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1 : general introduction.) |
| NF T47-135-1997 | 橡胶,塑料软管和软管组件.电阻的测定 | (Rubber and plastics hoses and hose assemblies. Determination of electrical resistance.) |
| NF T47-201-2002 | 橡胶,塑料软管和软管组件.尺寸的测量方法 | (Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions.) |
| NF T47-202-1996 | 橡胶和塑料软管及软管组件.液压静力试验(欧洲标准EN ISO 1402) | (Rubber and plastics hoses and hose assemblies. Hydrostatic testing.) |
| NF T47-203-2002 | 橡胶或塑料软管.弯曲试验 | (Rubber or plastics hoses - Bending tests.) |
| NF T47-205-1993 | 橡胶和塑料软管.静态条件下的耐臭氧性试验的评定 | (Rubber and platics hoses. Assessment of ozone resistance under static conditions.) |
| NF T47-206-1982 | 橡胶和塑料.管和软管的外径、厚度和同心度的测量 | (RUBBER OR PLASTICS BASED HOSES. MEASUREMENTS OF EXTERNAL DIAMETERS WALL THICKNESSES AND CONCENTRICITY.) |
| NF T47-209-1996 | 橡胶和塑料软管.衬里耐磨性测定 | (Rubber and plastics hoses. Determination of abrasion of lining.) |
| NF T47-210-1998 | 橡胶和塑料软管.暴露在氙弧灯下的试验.颜色和外观变化的测定 | (Rubber and plastics hoses. Exposure to a xenon arc lamp. Determination of changes in colour and appearance.) |
| NF T47-214-1998 | 橡胶和塑料软管.易燃烧性试验方法 | (Rubber and plastics hoses. Method of test for flammability.) |
| NF T47-215-1995 | 橡胶和塑料软管.稳定状态下抗紫外线的测定 | (RUBBER AND PLASTICS HOSES. DETERMINATION OF ULTRA-VIOLET RESISTANCE UNDER STATIC CONDITIONS. (EUROPEAN STANDARD EN ISO 8580).) |
| NF T47-217-1995 | 橡胶和塑料软管及软管组件.透气性测定 | (Rubber and plastics hoses and hose assemblies. Determination of permeability to gas.) |
| NF T47-218-1996 | 橡胶和塑料软管.在动力条件下耐臭氧性的评定(欧洲标准EN ISO 10960) | (RUBBER AND PLASTICS HOSES. ASSESSMENT OF OZONE RESISTANCE UNDER DYNAMIC CONDITIONS. (EUROPEAN STANDARD EN ISO 10960).) |
| NF T47-251-1-1997 | 橡胶和塑料软管和软管组件.试验压力和爆破压力与设计工作压力的比值 | (RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES. RATIOS OF PROOF AND BURST PRESSURE TO DESIGN WORKING PRESSURE. (EUROPEAN STANDARD EN ISO 7751).) |
| NF T47-251-1996 | 工业通用橡胶和塑料软管.孔直径和公差.长度公差 | (Rubber and plastics hoses for general-purpose industrial applications. Bore diameters and tolerances, and tolerances on length.) |
| NF T47-254-2000 | 压缩空气织物增强塑料软管.规范 | (Plastic hoses, textile-reinforced, for compressed air - Specification.) |
| NF T47-257-1997 | 普通供水用带织物加固内衬的塑料软管.规范 | (Plastics hoses, textile-reinforced, for general-purpose water applications. Specification.) |
| NF T47-260-1978 | 橡胶和塑料.洗餐具机和洗衣机用排水管 | (RUBBER. DRAINAGE PIPES FOR DISHWASHERS AND WASHING MACHINES.) |
| NF T47-265-2002 | 塑料软管.含水材料抽吸和排放用螺旋热塑增强热塑性软管.规范 | (Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharghe of aqueous materials - Specification.) |
| NF T47-273-2002 | 无气涂漆用橡胶和/或塑料软管和软管组件.规范 | (Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification.) |
| NF T47-274-1993 | 塑料软管.常规用途的可折叠水管, 织物增强.规格(欧洲标准EN 28029) | (Plastics hose. General purpose collapsible water hose, textile reinforced. Specification.) |
| NF T47-280-1997 | 橡胶软管和软管组件.热塑料织物增强液力型.规范 | (PLASTICS HOSES AND HOSE ASSEMBLIES. THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE. SPECIFICATION. (EUROPEAN STANDARD EN 855).) |
| NF T47-282-2002 | 石油类液体的抽吸和低压出料用塑料软管和软管组件规范 | (Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquide - Specification.) |
| NF T47-286-1998 | 橡胶或塑料软管和软管组件.无柔性液压脉冲试验.欧洲标准EN ISO 6803) | (Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing.) |
| NF T47-287-1996 | 橡胶和塑料软管和管系.软管和管壁的透液量的测定 | (RUBBER AND PLASTICS HOSES AND TUBING. DETERMINATION OF TRANSMISSION OF LIQUIDS THROUGH HOSE AND TUBING WALLS. (EUROPEAN STANDARD EN ISO 8308).) |
| NF T47-401-1977 | 橡胶或塑料制圆柱形垫块 | (CYLINDERS LINED WITH RUBBER OR PLASTICS.) |
| NF T47-600-2002 | 橡胶和塑料软管和软管组件.词汇 | (Rubber and plastics hoses and hose assemblies - Vocabulary.) |
| NF T50-001-1-2000 | 塑料.聚酰胺(PA)模塑和挤制材料.名称与符号 | (Plastics - Polyamide (PA) moulding and extrusion materials - Part 1 : designation.) |
| NF T50-001-2-1996 | 塑料.模塑和挤压成型的聚酰胺(PA)材料.第2部分:试样的制备和性能的测定 | (PLASTICS. POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 1874-2).) |
| NF T50-002-2/A1-2000 | 塑料.聚丙烯(PP)模塑和挤制材料.第2部分:试样制备和性能测定.修改件1 | (Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1.) |
| NF T50-004-2-1995 | 塑料.乙烯/乙烯基醋酸脂共聚物热塑性塑料.第2部分:试样的制备和性能的测定 | (PLASTICS. ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 4613-2).) |
| NF T50-005-1988 | 塑料.聚(亚烷基)对苯二酸盐.第1部分:命名 | (Plastics. Polyalkylene terephtalates. Part 1 : designation.) |
| NF T50-006-2/A1-2000 | 塑料.聚乙烯(PE)模塑和挤制材料.第2部分:试样制备和性能测定.修改件1 | (Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1.) |
| NF T50-007-1-1999 | 塑料.聚丁烯(PB)模压和挤制材料.第1部分:命称与符号和规范的基础 | (PLASTICS. POLYBUTENE (PB) MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 8986-1).) |
| NF T50-007-2/A1-2000 | 塑料.聚丁烯(PB)模塑和挤制材料.第2部分:试样制备和性能测定.修改件1 | (Plastics - Polybutene (PB) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties - Amendment 1.) |
| NF T50-050-1-2002 | 塑料.符号和缩略术语.第1部分:基本聚合物及其专有特性 | (Plastics - Symbols and abbreviated terms - Part 1 : basic polymers and their special characteristics.) |
| NF T50-050-2-2002 | 塑料.符号和缩略语.第2部分:填充剂及加强材料 | (Plastics - Symbols and abbreviated terms - Part 2 : fillers and reinforcing materials.) |
| NF T50-050-4-1999 | 塑料.符号和缩略语.第4部分:阻燃剂 | (Plastics. Symbols and abbreviated terms. Part 4 : flame retardants.) |
| NF T50-060-2000 | 塑料.塑料产品通用识别标志 | (Plastics - Generic identification and marking of plastics products.) |
| NF T50-062-1-2000 | 塑料.单一数据的采样和收集比较.第1部分:模式材料 | (Plastics - Acquisition and presentation of comparable single-point data - Part 1 : moulding materials.) |
| NF T50-062-2-2002 | 塑料.可比单点数据的采集和表示法.第2部分:长纤维增强塑料 | (Plastics - Acquisition and presentation of comparable single-point data - Part 2 : long-fibre-reinforced plastics.) |
| NF T50-064-1-2003 | 塑料.可比多点数据的采集和表示.第1部分:机械性能 | (Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : mechanical properties.) |
| NF T50-064-2-1999 | 塑料.可比较多点数据的采集和表示.第2部分:热性能和工艺性能 | (PLASTICS. ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA. PART 2 : THERMAL AND PROCESSING PROPERTIES. (EUROPEAN STANDARD EN ISO 11403-2).) |
| NF T50-064-3-2001 | 塑料.可比较多点数据的采集和表示.第3部分:环境对特性的影响 | (Plastics - Acquisition and presentation of comparable multipoint data - Part 3 : environmental influences on properties.) |
| NF T50-100-2002 | 塑料.词汇 | (Plastics - Vocabulary.) |
| NF T51-000-1978 | 塑料.优选试验温度和试验时间 | (Plastics. Preferred scales of temperatures and test durations.) |
| NF T51-001-2003 | 塑料.弯曲性能测定 | (Plastics - Determination of flexural properties.) |
| NF T51-005-2-1996 | 塑料.载荷下偏转温度的测定.第2部分:塑料和橡木 | (Plastics. Determination of temperature of deflection under load. Part 2 : plastics and ebonite.) |
| NF T51-005-3-1996 | 塑料.载荷下偏转温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 | (Plastics. Determination of temperature of deflection under load. Part 3 : high-strength thermosetting laminates and long-fibre reinforced plastics.) |
| NF T51-006-1957 | 塑料.可溶于甲醇的聚苯乙烯物质的测定 | (PLASTICS. DETERMINATION OF METHANOL-SOLUBLE POLYSTYRENE.) |
| NF T51-008-1998 | 塑料.酚-甲醛模塑.游离氨的检验 | (Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia.) |
| NF T51-009-1998 | 塑料.酚-甲醛模塑.游离氨和铵化合物的测定.比色法 | (Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Colorimetric comparison method.) |
| NF T51-010-1998 | 塑料.酚-甲醛模塑.单体酚的测定.碘量法 | (Plastics. Phenol-formaldehyde mouldings. Detection of free phenols. Iodometric method.) |
| NF T51-012-1957 | 塑料模制材料收缩率的计算 | (PLASTICS. DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS.) |
| NF T51-013-1969 | 塑料液状聚氯乙烯树脂粘性指数的常规测定 | (PLASTICS. CONVENTIONAL DETERMINATION OF VISCOSITY NUMBER OF PVC RESINS IN SOLUTION.) |
| NF T51-018-1981 | 塑料.硬塑料反复弯曲纵向弹性模量 | (Plastics. Modulus of longitudinal elasticity of rigid plastics.) |
| NF T51-021-1997 | 塑料.热塑塑料.维卡(VICAT)软化温度的测定 | (Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST).) |
| NF T51-022-1997 | 塑料.微生物作用的评价(欧洲标准EN ISO 846) | (Plastics. Evaluation of the action of microorganisms.) |
| NF T51-023-1999 | 塑料.密胺甲醛树脂模制件.可提取甲醛含量的测定 | (Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde.) |
| NF T51-024-1-2003 | 塑料.硬度测定.第1部分:压球法 | (Plastics - Determination of hardness - Part 1 : ball indentation method.) |
| NF T51-024-2-1999 | 塑料.硬度测定.第2部分:洛氏硬度 | (Plastics. Determination of hardness. Part 2 : Rockwell hardness.) |
| NF T51-025-1999 | 塑料.增塑剂转移性的测定 | (Plastics. Determination of migration of plasticizers.) |
| NF T51-026-1998 | 塑料.氯乙烯均聚物和共聚物.氯含量的测定 | (Plastics. Vinyl chloride homopolymers and copolymers. Determination of chlorine content.) |
| NF T51-027-1965 | 塑料.氯乙烯一乙酸乙烯共聚物中醋酸乙烯的测定 | (PLASTICS. DETERMINATION OF VINYL IN VINYL CHLORIDE ACETATE COPOLYMERS.) |
| NF T51-028-1999 | 塑料.染料渗出的定量评定 | (Plastics. Qualitative evaluation of the bleeding of colorants.) |
| NF T51-029-2000 | 塑料.浸入液态化学试剂中效果测定的试验方法 | (Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals.) |
| NF T51-030-1986 | 塑料.在沸水中由6型聚酰胺树脂中提取物质的百分比测定 | (Plastics. Determination of the percentage of extractable materials by boilling water in polyamide 6 (refractometric method).) |
| NF T51-032-1976 | 塑料.浓缩溶液中聚酰胺树脂的粘度比测定 | (PLASTICS. DETERMINATION OF VISCOSITY RATIO OF POLYAMIDE RESINS IN CONCENTRATED SOLUTION.) |
| NF T51-034-2-1996 | 塑料.拉伸性能测定.第2部分:模压和挤压塑料试验条件 | (Plastics. Determination of tensile properties. Part 2 : test conditions for moulding and extrusion plastics.) |
| NF T51-034-3-1995 | 塑料.抗拉性能的测定.第3部分:薄膜和薄板材的试验条件 | (Plastics. Determination of tensile properties. Part 3 : test conditions for films and sheets.) |
| NF T51-034-4-1997 | 塑料.抗拉性能的测定.第4部分:正交同性和正交异性纤维增强塑料复合材料的试验条件.(欧洲标准EN ISO 527-4) | (Plastics. Determination of tensile properties. Part 4 : test conditions for isotropic and orthotropic fibre-reinforced plastic composites.) |
| NF T51-034-5-1997 | 塑料.抗拉性能的测定.第5部分:单向纤维增强塑料复合材料的试验条件(欧洲标准EN ISO 527-5) | (Plastics. Determination of tensile properties. Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.) |
| NF T51-035-1-2001 | 塑料.摆式冲击强度的测定.第1部分:无仪器冲击试验 | (Plastics - Determination of Charpy impact strength - Part 1 : non-instrumented impact test.) |
| NF T51-038-1999 | 塑料.热塑塑料熔体质量流速(MFR)和熔体体积流速(MVR)的测定 | (Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics.) |
| NF T51-039-1998 | 塑料.有机溶剂抽提物的测定(传统方法)(欧洲标准 EN ISO 6427) | (Plastics. Determination of matter extractable by organic solvents (conventional methods).) |
| NF T51-042-1967 | 塑料.聚氯乙烯树脂.压制产品松散密度的测定 | (PLASTICS. PVC RESINS. DETERMINATION OF COMPACTED APPARENT BULK DENSITY.) |
| NF T51-043-2003 | 塑料.氯乙烯均聚物和共聚物树脂.水中筛析 | (Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water.) |
| NF T51-044-1970 | 塑料.聚氯乙烯树脂.硫酸灰分的测定 | (PLASTICS. PVC RESINS. DETERMINATION OF SULPHATED ASH.) |
| NF T51-045-1997 | 塑料.灰分测定.第5部分:聚氯乙烯 | (PLASTICS. DETERMINATION OF ASH. PART 5 : POLY(VINYL CHLORIDE). (EUROPEAN STANDARD EN ISO 3451-5).) |
| NF T51-045-4-2000 | 塑料.灰分的测定.第4部分:聚酰胺 | (Plastics - Determination of ash - Part 4 : polyamides.) |
| NF T51-049-1969 | 塑料.聚酰胺树脂.熔点的测定.毛细管法 | (PLASTICS. POLYAMIDE RESINS. DETERMINATION OF MELTING POINT. SO-CALLED CAPILLARY TUBE METHOD.) |
| NF T51-050-1969 | 塑料.聚酰胺树脂.“熔点”的测定.凹凸镜法 | (PLASTICS. POLYAMIDE RESINS. DETERMINATION OF MELTING POINT. MENISCUS METHOD.) |
| NF T51-052-1988 | 塑料.聚合物和共聚物的水扩散.pH值的测定 | (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. DETERMINATION OF PH.) |
| NF T51-053-1968 | 塑料.聚合物和共聚物的水扩散.-10℃时冷冻和解冻交替作用下稳定性试验 | (Plastics. Aqueous dispersions of polymers and copolymers. Freeze-thaw cycle stability test.) |
| NF T51-054-1968 | 塑料.聚合物和共聚物的水扩散.105℃时的干提取物 | (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. DRY EXTRACT AT 105 DEGREES C.) |
| NF T51-057-1969 | 塑料.封闭式碳弧光灯暴露法 | (PLASTICS. METHOD OF EXPOSURE TO LIGHT FROM THE ENCLOSED CARBON ARC.) |
| NF T51-058-1969 | 塑料.光照下染色牢度的评定 | (PLASTICS. ESTIMATE OF COLOUR FASTNESS BY EXPOSURE TO LIGHT.) |
| NF T51-061-3-2003 | 塑料.用毛细管粘度计测定稀释溶液中聚合物的粘度.第3部分:聚乙烯和聚丙烯 | (Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3 : polyethylenes and polypropylenes.) |
| NF T51-063-1971 | 塑料.从微孔产品中排出的固态物质密度测定法 | (METHODS FOR DETERMINING THE DENSITY AND RELATIVE DENSITY (SPECIFIC GRAVITY) OF PLASTICS EXCLUDING CELLULAR PLASTICS.) |
| NF T51-065-1996 | 塑料.透明材料光透射率总量的测定.第1部分:单束发射仪器 | (PLASTICS. DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS. PART 1 : SINGLE-BEAM INSTRUMENT. (EUROPEAN STANDARD EN ISO 13468-1).) |
| NF T51-067-1983 | 塑料.光学性质 | (Plastics. Optical properties.) |
| NF T51-068-1983 | 塑料.取样透明度的测定 | (Plastics. Determination of transparency of a testpiece.) |
| NF T51-070-1974 | 塑料.热形变的测定.MARTENS试验 | (PLASTICS. DETERMINATION OF HEAT DEFORMATION. MARTENS TEST.) |
| NF T51-071-3-1996 | 塑料.通过氧指数测定其燃烧性.第3部分:高温试验 | (Plastics. Determination of burning behaviour by oxygen index. Part 3 : elevated-temperature test.) |
| NF T51-072-1993 | 塑料.与小火源相接的水平及垂直试样燃烧特性的测定 | (Plastics. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source.) |
| NF T51-073-1977 | 塑料.塑料燃烧特性.测定烟不透明度的试验方法 | (PLASTICS.REACTION TO FIRE.TEST METHOD TO MEASURE THE DENSITY OF SMOKE.) |
| NF T51-074-1986 | 塑料.燃烧特性.炽热丝的试验 | (Plastics. Fire behaviour. Hot wire test.) |
| NF T51-075-1986 | 塑料.燃烧特性.针状喷嘴试验 | (Plastics. Fire behaviour. Needle burner test.) |
| NF T51-076-1998 | 塑料.立式软薄试样与小火焰源接触的燃烧性能测定(欧洲标准EN ISO 9773) | (Plastics. Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source.) |
| NF T51-078-1993 | 塑料.125mm火源用试样的燃性测定 | (Plastics. Determination of the combustibility of specimens using a 125 mm flame source.) |
| NF T51-080-1999 | 塑料.导电塑料电阻的测定 | (Plastics. Measurement of resistivity of conductive plastics.) |
| NF T51-081-1981 | 塑料.吸尘性的评定 | (Plastics : . Evaluation of the tendency to dust collection.) |
| NF T51-082-1999 | 塑料.聚氯乙烯和有关含氯均聚物和共聚物及其混合物热稳定性的测定.色变法 | (PLASTICS. DETERMINATION OF THERMAL STABILITY OF POLY(VINYL CHLORIDE), RELATED CHLORINE-CONTAINING HOMOPOLYMERS AND COPOLYMERS AND THEIR COMPOUNDS. DISCOLORATION METHOD. (EUROPEAN STANDARD EN ISO 305).) |
| NF T51-083-1999 | 塑料.液态或象乳胶或分散体一样的树脂.用布洛克菲文德试验方法测定表面粘度 | (Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield test method.) |
| NF T51-100-1971 | 塑料.机械和热机试验及其描述用词汇 | (PLASTICS. VOCABULARY APPLICABLE TO MECHANICAL AND THERMOMECHANICAL TESTS AND TO THEIR INTERPRETATION.) |
| NF T51-101-1997 | 塑料.压缩性能的测定 | (Plastics. Determination of compressive properties.) |
| NF T51-103-1-2003 | 塑料.蠕变的测定.第1部分:拉伸蠕变 | (Plastics - Determination of creep behaviour - Part 1 : tensile creep.) |
| NF T51-103-2-2003 | 塑料.蠕变的测定.第2部分:用三点负载法测定扰屈蠕变 | (Plastics - Determination of creep behaviour - Part 2 : flexural creep by three-point loading.) |
| NF T51-104-1981 | 塑料.摆锤扭曲试验 | (Plastics. Testing with the torsion pendulum.) |
| NF T51-105-1971 | 塑料.聚氯乙烯.弯曲时常用极限温度的测定（卷绕法） | (PLASTICS. COLD BEND TEMPERATURE OF FLEXIBLE POLYVINYL CHLORIDE COMPOUND.) |
| NF T51-107-1977 | 塑料.线性接触磨损和摩擦试验.圆柱体在平面上的滑动 | (PLASTICS. LINEAR CONTACT. WEAR AND FRICTION TEST. (SLIDING OF A CYLINDER OVER A PLANE).) |
| NF T51-108-1984 | 塑料.滑动摩擦和磨损.术语定义和一般特性 | (Plastics. Friction and wear by sliding. Definitions of terms and general characteristics.) |
| NF T51-110-1975 | 塑料.平面和平面摩擦磨损试验.反复线性摩擦 | (WEAR TEST BY MEANS OF FRICTION WITH PLANE TO PLANE CONTACT (FRICTION BY MEANS OF ALTERNATING LINEAR SLIDING).) |
| NF T51-1101-1977 | 塑料.平面对平面磨损和摩擦试验.交替线性摩擦 | (PLASTICS. PLANE TO PLANE CONTACT WEAR AND FRICTION TEST. ALTERNATING LINEAR FRICTION.) |
| NF T51-111-1997 | 塑料.拉伸冲击强度测定 | (Plastics. Determination of tensile-impact strength.) |
| NF T51-113-1976 | 塑料.耐划痕性能的测定 | (PLASTICS. DETERMINATION OF THE RESISTANCE TO SCRATCHING.) |
| NF T51-114-1979 | 塑料.在特定温度下、在温度调节器壳体内机械特性的测定方法 | (PLASTICS. METHODS FOR DETERMINING MECHANICAL CHARACTERISTICS AT TEMPERATURE SPECIFIED IN A ENCLOSURE WITH REGULATION OF THE TEMPERATURE.) |
| NF T51-115-1982 | 塑料.耐磨损性测定 | (PLASTICS. DETERMINATION OF RESISTANCE TO ABRASION.) |
| NF T51-116-1-2000 | 塑料.硬质塑料击穿性能测定.第1部分:无仪器冲击试验 | (Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1 : non-instrumented impact testing.) |
| NF T51-116-2-2002 | 塑料.硬质塑料击穿性能的测定.第2部分:仪器冲击试验 | (Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2 : instrumented puncture test.) |
| NF T51-117-1-2003 | 塑料.动态机械性能的测定.第1部分:一般原理 | (Plastics - Determination of dynamic mechanical properties - Part 1 : general principles.) |
| NF T51-122-1988 | 塑料.用小试样法测定抗拉性能 | (PLASTICS. DETERMINATION OF TENSILE PROPERTIES BY USE OF SMALL SPECIMENS.) |
| NF T51-123-1998 | 塑料.斜撑柱硬度计检验 | (PLASTICS. VERIFICATION OF SHORE HARDNESS DUROMETERS.) |
| NF T51-140-1974 | 塑料.低密度聚乙烯混合物.碳黑成分的热解测定 | (LOW DENSITY POLYTHENE BASED PLASTICS : DETERMINATION OF THE CONTENT OF CARBON BLACK BY PYROLISIS.) |
| NF T51-141-1974 | 塑料.低密度聚乙烯混合物.碳黑成分的快速测定 | (LOW DENSITY POLYETHYLENE BASED PLASTICS. DETERMINATION OF THE CONTENT OF CARBON BLACK. (RAPID METHOD).) |
| NF T51-142-1992 | 塑料.聚乙烯和聚乙烯共聚物.炭黑分散度的估算.试验方法 | (Plastics. Polyethylene and polyethylene copolymere compounds. Evaluation of the degree of dispersion of carbon black. Test method.) |
| NF T51-143-1974 | 塑料.聚酰胺载体.石墨碳黑和玻璃纤维成分的测定 | (PLASTICS. FILLED POLYAMIDES. DETERMINATION OF PERCENTAGES OF GRAPHITE OR CARBON BLACK AND FIBER GLASS.) |
| NF T51-144-1974 | 塑料.填充聚酰胺.二硫化钼和玻璃纤维百分比的测定 | (FILLED POLYAMIDES. DETERMINATION OF PERCENTAGES OF MOLYBDENE BISULFIDE AND FIBER GLASS.) |
| NF T51-150-2001 | 塑料.镉的测定.湿分解法 | (Plastics - Determination of cadmium - Wet decomposition method.) |
| NF T51-162-1980 | 塑料.湿热环境暴露法 | (PLASTICS. METHOD OF EXPOSURE TO DAMP HEAT.) |
| NF T51-167-1999 | 塑料.增塑剂损耗的测定.活性炭法 | (Plastics. Determination of loss of plasticizers. Activated carbon method.) |
| NF T51-169-1997 | 塑料.暴露于直接风化、玻璃过滤的日光风化及使用屈折反光镜对日光增强风化的方法 | (PLASTICS. METHODS OF EXPOSURE TO DIRECT WEATHERING, TO WEATHERING USING GLASS-FILTERED DAYLIGHT, AND TO INTENSIFIED WEATHERING BY DAYLIGHT USING FRESNEL MIRRORS. (EUROPEAN STANDARD EN ISO 877).) |
| NF T51-170-1998 | 塑料.环境应力破裂(ESC)测定.恒定-拉伸-应力法 | (Plastics. Determination of environmental stress cracking (ESC). Constant-tensile-stress method.) |
| NF T51-171-1998 | 塑料.环境应力破裂(ESC)测定.球或针压痕法 | (Plastics. Determination of environmental stress cracking (ESC). Ball or pin impression method.) |
| NF T51-173-1998 | 塑料.聚酰胺.粘度值的测定 | (Plastics. Polyamides. Determination of viscosity number.) |
| NF T51-174-2003 | 塑料和硬质胶.用硬度计测定针入硬度[肖氏(SHORE)硬度] | (Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness).) |
| NF T51-175-1998 | 塑料.未饱和的聚酯树脂.80℃时的反应性测定(常规方法) | (Plastics. Unsaturated polyester resins. Determination of reactivity at 80 degrees celsius (conventional method) . (EUROPEAN standard en iso 584).) |
| NF T51-176-1998 | 塑料.聚酰胺中水含量的测定 | (Plastics. Polyamides (PA). Determination of water content.) |
| NF T51-177-1998 | 塑料.环氧树脂的硬化剂和促进剂.第1部分:标识 | (Plastics. Hardeners and accelerators for epoxide resins. Part 1 : designation.) |
| NF T51-178-1998 | 塑料.聚酰胺.试样的加速调配 | (Plastics. Polyamides. Accelerated conditoning of test specimens.) |
| NF T51-180-1986 | 塑料.循环利用.术语定义 | (Plastics. Cyclical exposure. Definition of terms.) |
| NF T51-181-1986 | 塑料.循环利用.处理试验的周期 | (Plastics. Cyclical exposure. Exposure test cycles.) |
| NF T51-185-1979 | 塑料.放在玻璃下的塑料在阳光、人工照明、大气作用和其它光线下暴露后颜色和性能变化的测定 | (PLASTICS. DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS,NATURAL WEATHERING,ARTIFICIAL LIGHT OR AT OTHERSEXPOSURES.) |
| NF T51-195-1-2000 | 塑料.暴露于实验室光源的方法.第1部分:通用指南 | (Plastics - Methods of exposure to laboratory light sources - Part 1 : general guidance.) |
| NF T51-195-2-1999 | 塑料.暴露于实验室光源的方法.第2部分:氙弧灯 | (PLASTICS. METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES. PART 2 : XENON-ARC SOURCES. (EUROPEAN STANDARD EN ISO 4892-2).) |
| NF T51-195-3-1999 | 塑料.暴露于实验室光源的方法.第3部分:UV荧光灯 | (PLASTICS. METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES. PART 3 : FLUORESCENT UV LAMPS. (EUROPEAN STANDARD EN ISO 4892-3).) |
| NF T51-196-1980 | 塑料.冷和干热试验指南 | (PLASTICS. GUIDE TO COLD AND DRY HEAT TESTS.) |
| NF T51-197-1980 | 塑料.湿热试验指南 | (PLASTICS. GUIDE TO DAMP HEAT TESTS.) |
| NF T51-198-1979 | 塑料.温度快速变化试验指南 | (PLASTICS. GUIDELINES FOR RAPID TEMPERATURE VARIATION TESTS.-) |
| NF T51-199-1974 | 塑料:亨利实验结果的统计分析 | (PLASTICS : STATISTICAL ANALYSIS OF EXPERIMENTAL RESULTS. HENRY TEST.) |
| NF T51-201-1998 | 塑料.液态树脂.比重计法测定比重 | (Plastics. Liquid resins. Determination of density by the pyknometer method.) |
| NF T51-211-1994 | 塑料.乳浊态或分散态聚合物/树脂.用确定的切变速率梯度旋转粘度计测量粘度 | (Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational viscometer with defined shear rate.) |
| NF T51-212-1998 | 塑料.使用毛细管粘度计测定稀释溶液中聚合物的粘度.第1部分:一般原则 | (Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscosimeters. Part 1 : general principles.) |
| NF T51-220-1976 | 塑料.聚合物和共聚物的水分散物.白点温度和片成形最低温度的测定 | (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. DETERMINATION OF WHITE POINT TEMPERATURE AND MINIMUM FILM-FORMING TEMPERATURE.) |
| NF T51-222-1982 | 塑料.温度作用下负荷弯曲度变化的测定 | (Plastics. Determination of deflection under load as a function of temperature.) |
| NF T51-223-1985 | 塑料.半晶体材料.热分析法测定常规熔点 | (PLASTICS. SEMI-CRISTALLINE MATERIALS. DETERMINATION OF THE CONVENTIONAL MELTING TEMPERATURE BY THERMAL ANALYSE.) |
| NF T51-225-1998 | 塑料.长时间受热后时间-温度极限值的测定 | (Plastics. Determination of time-temperature limits after prolonged exposure to heat.) |
| NF T51-226-1997 | 塑料.高聚物的热重分析法(TG).一般原理(欧洲标准EN ISO 11358) | (PLASTICS. THERMOGRAVIMETRY (TG) OF POLYMERS. GENERAL PRINCIPLES. (EUROPEAN STANDARD EN ISO 11358).) |
| NF T51-230-1-2001 | 塑料.超高分子量聚乙烯模塑和挤塑材料.第1部分:名称与符号体制和基本规范 | (Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1 : designation system and basis for specifications.) |
| NF T51-230-2-1999 | 塑料.超高分子量聚乙烯模塑和挤制材料.第2部分:试样制备和性能测定 | (PLASTICS. ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 11542-2).) |
| NF T51-250-1976 | 塑料.醋酸乙烯的聚合物和共聚物的水分散物.溴值的测定 | (PLASTICS. AQUEOUS DISPERSIONS OF HOMO AND COPOLYMERS OF VINYL ACETATE. DETERMINATION OF BROMINE NUMBER.) |
| NF T51-251-1984 | 塑料.聚合物和共聚物的水分散物.密度的测定 | (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. MEASUREMENT OF DENSITY.) |
| NF T51-252-1984 | 塑料.聚合物和共聚物的水分散物.表面张力的测定.海浪浸泡动态法 | (PLASTICS. AQUEOUS DISPERSIONS OF POLYMERS AND COPOLYMERS. MEASUREMENT OF SUPERFICIAL TENSION DYNAMIC METHOD BY IMMERSION FOIL.) |
| NF T51-294-1-1998 | 塑料.热塑材料试样的注模.第1部分:一般原则,多用途注模和棒试样 | (PLASTICS. INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS. PART 1 : GENERAL PRINCIPLES, AND MOULDING OF MULTIPURPOSE AND BAR TEST SPECIMENS. (EUROPEAN STANDARD EN ISO 294-1).) |
| NF T51-294-1/A1-2002 | 塑料.热塑性材料试样的注模.第1部分:多用途及条形试样的模制和总则 | (Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1 : general principles, and moulding of multipurpose and bar test specimens.) |
| NF T51-294-2-1998 | 塑料.热塑材料试样的注模.第2部分:小拉伸棒 | (PLASTICS. INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS. PART 2 : SMALL TENSILE BARS. (EUROPEAN STANDARD EN ISO 294-2).) |
| NF T51-294-3-1998 | 塑料.热塑材料试样的喷射铸造法.第3部分:小板 | (PLASTICS. INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS. PART 3 : SMALL PLATES. (EUROPEAN STANDARD EN ISO 294-3).) |
| NF T51-294-4-2003 | 塑料.热塑材料试样的注塑法.第4部分:模塑收缩率的测定 | (Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4 : determination of moulding shrinkage.) |
| NF T51-300-1999 | 塑料.燃烧试验.标准火源 | (PLASTICS. FIRE TESTS. STANDARD IGNITION SOURCES. (EUROPEAN STANDARD EN ISO 10093).) |
| NF T51-301-1998 | 塑料.酚醛铸模材料.丙酮溶物质的测定(非铸模状态内材料中的大致树脂含量) | (Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state).) |
| NF T51-351-1985 | 塑料.灰分比率的测定.未增塑醋酸纤维素 | (Plastics. Determination of ash. Unplasticized cellulose acetate.) |
| NF T51-352-1999 | 塑料.未增塑的醋酸纤维素.游离酸度的测定 | (PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF FREE ACIDITY. (EUROPEAN STANDARD EN ISO 1061).) |
| NF T51-356-1999 | 塑料.非增塑的醋酸纤维素.水分含量的测定 | (PLASTICS. UNPLASTICIZED CELLULOSE ACETATE. DETERMINATION OF MOISTURE CONTENT. (EUROPEAN STANDARD EN ISO 585).) |
| NF T51-357-1999 | 塑料.醋酸纤维素.模塑时粘度降低的测定 | (PLASTICS. CELLULOSE ACETATE. DETERMINATION OF VISCOSITY LOSS ON MOULDING. (EUROPEAN STANDARD EN ISO 1599).) |
| NF T51-358-1999 | 塑料.醋酸纤维素.利用加热的不同时期在模制样品生产时光吸收量的测定 | (PLASTICS. CELLULOSE ACETATE. DETERMINATION OF LIGHT ABSORPTION ON MOULDED SPECIMENS PRODUCED USING DIFFERENT PERIODS OF HEATING. (EUROPEAN STANDARD EN ISO 1600).) |
| NF T51-400-2000 | 热塑性塑料用填充材料.范围、名称与符号、要求和试验 | (Filler materials for thermoplastics - Scope, designation, requirements, tests.) |
| NF T51-401-1981 | 塑料.热固性模制材料.收缩和后收缩的测定 | (PLASTICS. THERMOSETTING MOULDING MATERIALS. DETERMINATION OF SHRINKAGE AND POST-SHRINKAGE.) |
| NF T51-402-1998 | 塑料.热固注模材料.传输流量的测定(欧洲标准 EN ISO 7808) | (Plastics. Thermosetting moulding materials. Determination of transfer flow.) |
| NF T51-403-1998 | 塑料.酚醛树脂.差示扫描量热法测定反应热和温度 | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY. (EUROPEAN STANDARD EN ISO 11409).) |
| NF T51-404-1998 | 塑料.酚醛树脂.通过液相色谱法的分离 | (PLASTICS. PHENOLIC RESINS. SEPARATION BY LIQUID CHROMATOGRAPHY. (EUROPEAN STANDARD EN ISO 11401).) |
| NF T51-405-1998 | 塑料.缩合树脂.游离甲醛的测定 | (PLASTICS. CONDENSATION RESINS. DETERMINATION OF FREE FORMALDEHYDE. (EUROPEAN STANDARD EN ISO 11402).) |
| NF T51-406-1999 | 塑料.热固注模材料.提高温度下短期性能的评估(EN ISO11248) | (Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures.) |
| NF T51-421-1998 | 塑料.酚醛树脂粉.在加热玻璃板上流动距离的测定 | (Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate.) |
| NF T51-422-1995 | 塑料.酚醛树脂粉.用空气喷射的筛滤器械的筛分析 | (Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus.) |
| NF T51-423-1998 | 塑料.液体酚醛树脂.水溶混性的测定 | (Plastics. Liquid phenolic resins. Determination of water miscibility.) |
| NF T51-425-1983 | 塑料.固态和液态酚树脂.密度的测定 | (PLASTICS. LIQUID AND SOLID PHENOLIC RESINS. MEASUREMENT OF DENSITY.) |
| NF T51-426-1995 | 塑料.液态酚醛树脂或酚醛树脂溶液粘度的测定 | (Plastics. Phenolic resins in the liquid state of in solution. Determination of viscosity.) |
| NF T51-428-1998 | 塑料.酚醛树脂.B-变化测试板上反应性能的测定 | (Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate.) |
| NF T51-429-2001 | 塑料.酚醛树脂.用自动设备测定特殊条件下的胶凝时间 | (Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus.) |
| NF T51-430-1983 | 塑料.酚树脂.水含量测定.卡尔·费休法 | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF WATER CONTENT. KARL FISCHER METHOD.) |
| NF T51-431-1997 | 塑料.酚醛树脂.六亚甲基四胺含量的测定.基氏定氮法和高氯酸法(欧洲标准EN ISO 8988) | (Plastics. Phenolic resins. Determination of hexamethylenetetramine content. Kjeldahl method and perchloric acid method.) |
| NF T51-432-1984 | 塑料.酚树脂.过氯酸法测定HMTA含量 | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF HMTA CONTENT BY PERCHLORIC ACID METHOD.) |
| NF T51-434-1997 | 塑料.酚醛树脂.游离甲醛含量的测定盐酸胲法(欧洲标准EN ISO 9397) | (Plastics. Phenolic resins. Determination of free-formaldehyde content. Hydroxylamine hydrochloride method.) |
| NF T51-435-1985 | 塑料.固态酚树脂.毛细管法测定熔化范围 | (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF MELTING RANGE BY THE CAPILLARY TUBE METHOD.) |
| NF T51-436-2002 | 塑料.酚醛树脂.用气体色谱法测定残余酚的含量 | (Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography.) |
| NF T51-437-1985 | 塑料.固态酚树脂.软化点的测定.珠环法 | (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF SOFTENING POINT. “BALL AND RING“ METHOD.) |
| NF T51-438-1998 | 塑料.液态酚醛树脂.非挥发性物质的常规测定 | (Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter.) |
| NF T51-440-2000 | 塑料.酚醛树脂.分类和试验方法 | (Plastics - Phenolic resins - Classification and test methods.) |
| NF T51-441-1997 | 塑料.酚醛树脂.测定可溶酚醛树脂在酸性条件下的反应性(欧洲标准EN ISO 9771) | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS. (EUROPEAN STANDARD EN ISO 9771).) |
| NF T51-442-1995 | 塑料.酚醛树脂.树脂萃取物电导率的测定 | (PLASTICS. PHENOLIC RESINS. DETERMINATION OF ELECTRICAL CONDUCTIVITY OF RESIN EXTRACTS. (EUROPEAN STANDARD EN ISO 9944).) |
| NF T51-501-1999 | 塑料.不饱和聚酯树脂和环氧树脂.体积总收缩率的测定 | (Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage.) |
| NF T51-510-1-2002 | 塑料.不饱和聚酯树脂(UP-R).第1部分:名称与符号系统 | (Plastics - Unsaturated-polyester resins (UP-R) - Part 1 : designation system.) |
| NF T51-510-2-2002 | 塑料.不饱和聚酯树脂(UP-R).第2部分:试样的制备和性能的测定 | (Plastics - Unsaturated-polyester resins (UP-R) - Part 2 : preparation of test specimens and determination of properties.) |
| NF T51-511-2000 | 塑料(聚脂树脂)、涂料和清漆(粘合剂).部分酸值和全部酸值的测定 | (Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value.) |
| NF T51-512-2003 | 塑料.不饱和聚酯树脂.室温条件下胶凝时间的测量 | (Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature.) |
| NF T51-513-1998 | 塑料.不饱和聚酯树脂.羟基值的测定 | (Plastics. Unsaturated polyester resins. Determination of hydroxyl value.) |
| NF T51-515-1979 | 塑料.不饱和非聚合聚酯树脂.挥发物测定 | (PLASTICS. UNSATURATED UNPOLYMERIZED POLYESTERS RESINS. DETERMINATION OF VOLATILE MATTER.) |
| NF T51-519-1999 | 塑料.不饱和聚酯和环氧树脂.氯总含量的测定 | (PLASTICS. UNSATURATED POLYESTERS AND EPOXIDE RESINS. DETERMINATION OF TOTAL CHLORINE CONTENT. (EUROPEAN STANDARD EN ISO 4615).) |
| NF T51-520-1978 | 塑料.环氧树脂.名称 | (EPOXY RESINS. DESIGNATION.) |
| NF T51-523-1976 | 塑料.环氧树脂和缩水甘油酸酯.无机氯的测定.直接滴定法 | (PLASTICS. EPOXY RESINS AND GLYCIDIC ESTERS. DETERMINATION OF INORGANIC CHLORINE. DIRECT TITRATION METHOD.) |
| NF T51-524-1998 | 塑料.环氧树脂和相关材料.易皂化氯的测定 | (Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine.) |
| NF T51-525-1979 | 塑料.液态或固态未聚合环氧树脂.挥发物质常规含量的测定 | (PLASTICS. SOLID OR LIQUID UNPOLYMERIZED EPOXY RESINS. DETERMINATION OF VOLATILE MATTER.) |
| NF T51-527-1985 | 塑料.环氧树脂.性能的测定 | (PLASTICS. EPOXIES. DETERMINATION OF PROPERTIES.) |
| NF T51-530-1997 | 塑料.环氧树脂用硬化剂和促凝剂.酸酐中自由酸的测定(欧洲标准EN ISO 7327) | (PLASTICS. HARDENERS AND ACCELERATORS FOR EPOXIDE RESINS. DETERMINATION OF FREE ACID IN ACID ANHYDRIDE. (EUROPEAN STANDARD EN ISO 7327).) |
| NF T51-541-1982 | 塑料.粉状聚乙烯对苯二甲酸酯.水分的测定 | (PLASTICS. POLY(ETHYLENE TEREPHTALATE) GRANULES. DETERMINATION OF WATER CONTENT.) |
| NF T51-542-1987 | 塑料.粘度值和限定粘度值测定.第5部分:聚对苯二酸亚烃酯 | (PLASTICS. DETERMINATION OF VISCOSITY NUMBER AND LIMITING VISCOSITY NUMBER. PART 5 : POLY(AKYLENE TEREPHTALATES).) |
| NF T51-550-1-1998 | 塑料.聚四氟乙烯(PTFE)半成品.第1部分:要求和标识 | (PLASTICS. POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS. PART 1 : REQUIREMENTS AND DESIGNATION. (EUROPEAN STANDARD EN ISO 13000-1).) |
| NF T51-550-2-1998 | 塑料.聚四氟乙烯(PTFE)半成品.第2部分:试样的制备和特性的测定 | (PLASTICS. POLYTETRAFLUOROETHYLENE (PFTE) SEMI-FINISHED PRODUCTS. PART 2 : PREPARATION OF SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 13000-2).) |
| NF T51-551-1987 | 塑料.粘度值和限定粘度值测定.第4部分:聚碳酸酯(PC)模制和挤压材料 | (PLASTICS. DETERMINATION OF VISCOSITY NUMBER AND LIMITING VISCOSITY NUMBER. PART 4 : POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS.) |
| NF T51-553-1-1999 | 塑料.含氟聚合物的分散、模塑和挤制材料.第1部分:名称与符号系统及基本规范 | (PLASTICS. FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 12086-1).) |
| NF T51-553-2-1999 | 塑料.含氟聚合物的分散、模塑和挤制材料.第2部分:试样制备和性能测定 | (PLASTICS. FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 12086-2).) |
| NF T51-560-1990 | 塑料.熔融状态下流变特性的测定.毛细管流变仪法 | (PLASTICS. DETERMINATION OF THE RHEOLOGICAL CHARACTERISTICS IN THE MOLTEN STATE. CAPILLARU RHEOMETER METHOD.) |
| NF T51-620-1971 | 塑料.聚丙烯和复合聚丙烯热流动指数的测定 | (DETERMINATION OF THE MELT FLOW INDEX OF POLYPROPYLENE AND POLYPROPYLENE COMPOUNDS.) |
| NF T51-621-2000 | 塑料.用毛细管和偏振光显微镜测定半晶体聚合物的熔化特性(熔化温度或熔化范围) | (Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods.) |
| NF T51-624-1987 | 塑料.聚丙烯(PP)和丙烯共聚物热塑塑料.全同指数测定 | (PLASTICS. POLYPROPYLENE (PP) AND PROPYLENE-COPOLYMER THERMOPLASTICS. DETERMINATION OF ISOTACTIC INDEX.) |
| NF T51-659-2-1998 | 塑料.烟雾产生.第2部分:用单燃烧室试验测定光密度 | (Plastics. Smoke generation. Part 2 : determination of optical density by a single-chamber test.) |
| NF T51-701-2002 | 塑料.氯乙烯均聚物和共聚物树脂.使用喷气式筛滤器械的筛析 | (Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus.) |
| NF T51-702-1998 | 塑料制品.环氧氨硬化剂.对第1、2、3 氨组含氮量的测定 | (Plastics. Amine epoxide hardeners. Determination of primary, secondary and tertiary amine group nitrogen content.) |
| NF T51-705-1998 | 塑料.浇注性的测定 | (Plastics. Determination of pourability.) |
| NF T51-706-1986 | 塑料.氯乙烯均聚物和共聚物树脂.残余氯乙烯单体测定.气相色谱法 | (PLASTICS. HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORID. DETERMINATION OF RESIDUAL VINYL CHLORID MONOMER. GAS CHROMATOGRAPHIC METHOD.) |
| NF T51-707-1986 | 塑料.柔性材料扭刚度测定.第2部分:适用于氯乙烯的均聚物和共聚物塑性化化合物 | (PLASTICS. DETERMINATION OF STIFFNESS IN TORSION OF FLEXIBLE MATERIALS. PART 2 : APPLICATION TO PLASTICIZED COMPOUNDS OF HOMOPOLYMERS AND COPOLYMERS OF VINYL CHLORIDE.) |
| NF T51-710-1986 | 塑料.聚氯乙烯糊料.使用分离流变化测定表观粘度 | (Plastics. Polyvinyl chloride pastes. Determination of apparent viscosity using the severs rheometer.) |
| NF T51-713-1-2002 | 塑料.热固粉末模塑复合物试样的喷射模塑成型.第1部分:一般原理和多用途试样的模塑成型 | (Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1 : general principles and moulding of multipurpose test specimens.) |
| NF T51-713-2-2001 | 塑料.热固粉末注模化合物(PMCs)的试验样品注模.第2部分:小盘 | (Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2 : small plates.) |
| NF T51-730-1972 | 塑料.通过与增塑剂接触后的转移测定聚乙烯各种介电性能 | (PLASTICS. DETERMINATION OF CHANGES IN DIELECTICAL PROPERTIES OF POLYETHYLENE BY MIGRATION DUE TO CONTACT WITH A PLASTICIZED MATERIAL.) |
| NF T51-731-1980 | 塑料.乙烯增塑成分.低电压穿透阻力的测定 | (Plastics. Plasticized vinyl compounds. Determination of the volume resistivity at low voltage.) |
| NF T51-750-1981 | 塑料.氯乙烯均聚物和共聚物树脂.挥发物质（色拾水）的测定 | (Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water).) |
| NF T51-770-1979 | 塑料.浆状聚氯乙烯树脂.浆的制备 | (PLASTICS. PVC RESINS FOR PASTES. PREPARATION OF A PASTE.) |
| NF T51-771-1999 | 塑料.试验用PVC糊料的制备.溶解方法(EN ISO 11468) | (PLASTICS. PREPARATION OF PVC PASTES FOR TEST PURPOSES. DISSOLVER METHOD. (EUROPEAN STANDARD EN ISO 11468).) |
| NF T51-782-1998 | 塑料.一般应用的聚氯乙烯的均聚物和共聚物树脂.室温下增塑剂吸收的测定 | (Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature.) |
| NF T51-783-1978 | 塑料.一般用聚氯乙烯树脂.加温时增塑剂凝固的测定 | (PVC RESINS FOR GENERAL APPLICATIONS ; DETERMINATION OF ABSORPTION OF PLASTICIZER IN THE HOT STATE.) |
| NF T51-785-1-1993 | 塑料.化合物、聚乙烯共聚物基础上的产品、发展到氯化氢的共聚物及高温下的其他酸性产品的倾向性测定.第1部 | (PLASTICS. DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES. PART 1 : CONGO RED METHOD.) |
| NF T51-785-3-2000 | 塑料.升温条件下基于氯乙烯高聚物和共聚物的化合物和产品放出盐酸和其它酸类产品的趋势测定.第3部分:电导分 | (Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperature) |
| NF T51-785-4-2000 | 塑料.升温条件下基于氯乙烯高聚物和共聚物的化合物和产品放出盐酸和其它酸类产品的趋势测定.第4部分:电位法 | (Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperature) |
| NF T51-820-1998 | 塑料.乙烯、醋酸乙烯酯共聚物(EVAC).热固塑料.醋酸乙烯酯含量的测定 | (Plastics. Ethylene/vinyl acetate copolymer (EVAC) thermoplastics. Determination of vinyl acetate content.) |
| NF T51-831-2003 | 塑料.用锥形辐射加热器和热电堆探测器进行简单热释放试验 | (Plastics - Simple heat release test using a conical radiant heater and a thermopile detector.) |
| NF T51-901-1981 | 塑料.气相色层分离法测定聚苯乙烯中苯乙烯单体残留物 | (PLASTICS. DETERMINATION OF RESIDUAL STYRENE MONOMER IN POLYSTYRENE BY GAS CHROMATOGRAPHY.) |
| NF T51-911-2001 | 塑料.伊兆特(Izod)冲击强度的测定 | (Plastics - Determination of Izod impact strength.) |
| NF T51-914-2002 | 塑料.环氧树脂和环氧丙基酯.无机氯的测定 | (Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine.) |
| NF T52-100-1980 | 塑料.聚氨基甲酸酯塑料.聚醚.聚酯.异氰酸盐.试验方法一览表.主要标准 | (PLASTICS. BASE MATERIALS FOR POLYURETHANES. POLYETHERS,POLYESTERS,ISOCYANATES. LIST OF TEST METHODS. SUMMARY STANDARD.) |
| NF T52-130-2002 | 塑料.聚氨酯原材料.异氰酸酯的含量测定 | (Plastics - Polyurethane raw materials - Determination of isocyanate content.) |
| NF T52-131-1988 | 塑料.聚氨基甲酸酯塑料.异氰酸盐密度的测定 | (PLASTICS. BASIC MATERIALS FOR POLYURETHANE. DETERMINATION OF THE DENSITY OF ISOCYANATES.) |
| NF T52-132-1988 | 塑料.聚氨基甲酸酯塑料.纯异氰酸盐.异氰酸盐功能的测定 | (PLASTICS. BASIC MATERIALS FOR POLYURETHANE. PURE ISOCYANATES. DETERMINATION OF ISOCYANATES FUNCTIONS.) |
| NF T52-133-1988 | 塑料.聚氨基甲酸酯塑料.原异氰酸盐.异氰酸盐功能的测定 | (PLASTICS. BASIC MATERIALS FOR POLYURETHANE. RAW ISOCYANATES. DETERMINATION OF ISOCYANATES FUNCTIONS. “HOT“ METHOD.) |
| NF T52-134-1979 | 塑料.聚氨基甲酸酯塑料.远红外光谱法测定二异氰酸二苯乙烯中2,4和2,6-异构体的含量 | (PLASTICS. BASIC MATERIALS FOR POLYURETHANES. DETERMINATION OF THE RATIO OF 2,4 AND 2,6 ISOMERS IN THE TOLUYLENE DIISOCYANATE BY INFRA-RED SPECTROSCOPY.) |
| NF T52-135-1979 | 塑料.聚氨基甲酸酯塑料.二异氰酸二苯乙烯中水溶氯含量的测定 | (PLASTICS. PRIMARY MATERIALS FOR POLYURETHANES. DETERMINATION OF CHLORIDE HYDROLYSABLE IN DIISOCYANATE TOLYLENE.) |
| NF T52-136-1979 | 塑料.聚氨基甲酸酯塑料.二异氰酸二苯乙烯.酸度的测定 | (PLASTICS. BASIC MATERIALS FOR POLYURETHANES. TOLUYLENEDIISOCYANATE. DETERMINATION OF ACIDITY.) |
| NF T52-137-1979 | 塑料.聚氨基甲酸酯塑料.原二异氰酸盐和改性二异氰酸盐.酸度的测定 | (PLASTICS. BASIC MATERIALS FOR POLYURETHANES. RAW OR MODIFIED ISOCYANATES. DETERMINATION OF ACIDITY.) |
| NF T52-138-1979 | 塑料.聚氨基甲酸酯塑料.纯二异氰酸盐和原二异氰酸盐中总氯含量的测定 | (PLASTICS. BASIC MATERIALS FOR POLYURETHANES. DETERMINATION OF TOTAL CHLORIDE IN PURE AND RAW ISOCYANATES.) |
| NF T52-139-1979 | 塑料.聚氨基甲酸酯塑料.原二异氰酸盐中固态物质含量的测定 | (RAW MATERIALS FOR POLYURETHANES. DETERMINATION OF THE SEDIMENT IN CRUDE ISOCYANATES.) |
| NF T52-140-1980 | 塑料.聚氨基甲酸酯塑料.预聚合物中游离二异氰酸二苯乙烯含量的测定.气相色层分离法 | (PLASTICS-BASIC MATERIALS FOR POLYURETHANES. DETERMINATION OF THE FREE TOLYYLENEDIISOCYANATE CONTENT OF PREPOLYMERS GAS CHROMATOGRAPHY METHOD.) |
| NF T52-151-1979 | 塑料.聚氨基甲酸酯塑料.聚酯.聚醚和异氰酸盐.加德纳单位颜色目视法测定 | (PLASTICS. PRIMARY MATERIALS FOR POLYURETHANES. POLYESTERS,POLYETHERS AND ISOCYANATES. VISUAL ASSESSMENT OF COLORATION IN GARDNER UNITS.) |
| NF T53-002-2-1999 | 塑料.未增塑聚氯乙烯(PVC-U)模塑和挤制材料.第2部分:试样制备和性能测定 | (PLASTICS. UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 1163-2).) |
| NF T53-003-2-1999 | 塑料.增塑聚氯乙烯(PVC-P)模塑和挤制材料.第2部分:试样制备和性能测定 | (PLASTICS. PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 2898-2).) |
| NF T53-020-1977 | 塑料.承压流体管用低密度聚乙烯基成分.规范 | (BASED LOW DENSITY POLYTHENE COMPOUNDS FOR PRESSURE PIPELINES. SPECIFICATIONS.) |
| NF T53-033-2-1999 | 塑料.丙烯腈/丁二烯/苯乙烯共聚物(ABS)的模塑和挤制材料.第2部分:试样的制备和性能的测定 | (PLASTICS. ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 2580-2).) |
| NF T53-034-2-1999 | 塑料.耐冲击聚苯乙烯(PS-I)模塑和挤制材料.第2部分:试样的制备和性能的测定 | (PLASTICS. IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 2897-2).) |
| NF T53-035-1981 | 塑料.无定形热塑塑料模制材料.试件后收缩的测定 | (PLASTICS. AMORPHOUS THERMOPLASTIC MOULDING MATERIALS. DETERMINATION OF POST-SHRINKAGE OF TEST SPECIMENS.) |
| NF T53-036-2-1999 | 塑料.苯乙烯/丙烯腈(SAN)共聚物的模塑和挤制材料.第2部分:试样的制备和性能的测定 | (PLASTICS. STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 4894-2).) |
| NF T53-037-1-2001 | 塑料.丙烯腈-苯乙烯-丙烯酸酯、丙烯腈-(乙烯-丙烯-二烯烃)-苯乙烯和丙烯腈-(氯化聚乙烯)-苯乙烯模制和挤压 | (Plastics - Acrylonitrile-styrene-acrylic (ASA), acrylonitrile(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Pa) |
| NF T53-037-2-1999 | 塑料.不包括丁二烯改进材料的耐冲击丙烯腈/苯乙烯模塑和挤制材料(ASA,AES,ACS).第2部分:试样的制备和性能的 | (PLASTICS. IMPACT-RESISTANT ACRYLONITRILE/STYRENE (ASA, AES, ACS) MOULDING AND EXTRUSION MATERIALS, EXCLUDING BUTADIENE-MODIFIED MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 6402-2).) |
| NF T53-038-1-1999 | 塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯(MABS)模塑和挤制材料.第1部分:名称与符号系统及基本规范 | (PLASTICS. METHYLMETHACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS. PART 1 : DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS. (EUROPEAN STANDARD EN ISO 10366-1).) |
| NF T53-038-2-1999 | 塑料.甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯(MABS)模塑和挤制材料.第2部分:试样制备和性能测定 | (PLASTICS. METHYLMETHACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS. PART 2 : PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN ISO 10366-2).) |
| NF T53-501-1998 | 塑料.氨基塑料模塑材料.挥发性物质的测定 | (Plastics. Aminoplastic moulding materials. Determination of volatile matter.) |
| NF T54-006-2003 | 塑料管道系统.未增塑聚氯乙烯管.检验规定温度下抗二氯甲烷的试验方法 | (Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for the resistance to dichloromethane at a specified temperature (DCMT).) |
| NF T54-007-1994 | 塑料管道系统.压力管和配件的机械接合.在恒定应力下抗拔出性能的试验方法 | (THERMOPLASTICS PIPING SYSTMES. END-LOAD BEARING MECHANICAL JOINTS BETWEEN PRESSURE PIPES AND FITTINGS. TEST METHOD FOR RESISTANCE TO PULL-OUT UNDER CONSTANT LONGITUDINAL FORCE. (EUROPEAN STANDARD EN 712).) |
| NF T54-008-1994 | 塑料管道系统.配件和聚烯烃压力管的机械接合.在弯曲时内部压力引起的密封性的试验方法 | (PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING. (EUROPEAN STANDARD EN 713).) |
| NF T54-009-1994 | 热塑料管道系统.压力管和模塑配件的合成橡胶密封环型接合.在无轴向推力时内部流体静力学压力下密封性的试验 | (THERMOPLASTICS PIPING SYSTEMS. NON-END-LOAD-BEARING ELASTOMERIC SEALING RING TYPE JOINTS BETWEEN PRESSURE PIPES AND MOULDED FITTINGS. TEST METHOD FOR LEAKIGHTNESS UNDER INTERNAL HYDROSTATIC PRESSURE WITHOUT END THRUST. (EUROPEAN STANDARD EN 714).) |
| NF T54-010-1994 | 塑料管道系统.压力管和配件的机械和胶合接合.在包含轴向推力的内部水压下密封性的试验方法 | (THERMOPLASTICS PIPING SYSTEMS. END-LOAD BEARING JOINTS BETWEEN SMALL DIAMETER PRESSURE PIPES AND FITTINGS. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL WATER PRESSURE, INCLUDING END THRUST. (EUROPEAN STANDARD EN 715).) |
| NF T54-012-1995 | 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头.外部液压条件下防漏密封试验方法 | (PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHANICAL JOINTS FOR THERMOPLASTICS PRESSURE PIPING. TEST METHOD FOR LEAKTIGHTNESS UNDER EXTERNAL HYDROSTATIC PRESSURE. (EUROPEAN STANDARD EN 911).) |
| NF T54-015-1997 | 塑料管道系统.热塑阀门.抗内压和防泄漏的试验方法 | (Plastics piping systems. Thermoplastics valves. Test methods for resistance to internal pressure and leaktightness.) |
| NF T54-016-1-1999 | 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第1部分:概述 | (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : general.) |
| NF T54-016-2-1999 | 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第2部分:管子 | (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2 : pipes.) |
| NF T54-016-3-1999 | 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第3部分:配件 | (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3 : fittings.) |
| NF T54-016-4-1999 | 供水用塑料管道系统.未增塑聚氯乙烯.第4部分:管件和附件 | (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4 : valves and ancillary equipment.) |
| NF T54-016-5-1999 | 供水用塑料管道系统.未增塑聚氯乙烯(PVC-U).第5部分:系统使用的适用性 | (Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5 : fitness for purpose of the system.) |
| NF T54-017-1-1999 | 建筑物内土壤和废物排放用塑料管道系统(低温和高温).未增塑聚氯乙烯(PVC-U).第1部分:管道、配件和系统的规 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes, fittings and the system.) |
| NF T54-019-1995 | 塑料管道和导管系统.未增塑聚氯乙烯(PVC-U)管和配件.粘度值的测定和K值的计算的样品制备 | (PLASTICS PIPING AND DUCTING SYSTEMS. PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). SPECIMEN PREPARATION FOR DETERMINATION OF THE VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE. (EUROPEAN STANDARD EN 922).) |
| NF T54-020-1995 | 塑料.未增塑聚氯乙烯管.冷却扩孔试验 | (Plastics. Pipes made of light weight unplasticized polyvinyl chloride. Cold flaring test.) |
| NF T54-024-1994 | 塑料管道系统.热塑塑料管和配件.维卡软化点的测定 | (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS. DETERMINATION OF VICAT SOFTENING TEMPERATURE (VST). (EUROPEAN STANDARD EN 727).) |
| NF T54-025-1995 | 塑料管道系统.热塑塑料管.恒定低温度下耐内压性能的测定 | (Plastics piping systems. Thermoplastics pipes. Determination of resistance to internal pressure at constant temperature.) |
| NF T54-029-1981 | 塑料.未增塑聚氯乙烯模制接头.压力系列.规范 | (Plastics. Moulded unplasticized PVC fittings. Pressure series. Specifications.) |
| NF T54-036-1994 | 塑料管道和导管系统.注模热塑配件.热效应目视评定的试验方法 | (Plastics piping and ducting systems. Injection-moulded thermoplastics fitting. Test method for visually assessing effects of heating.) |
| NF T54-037-1981 | 塑料.未增塑聚氯乙烯管道元件.生活污水无压排放设备用密封圈接头.使 用特性 | (Plastics. Un-plasticized PVC parts dor piping. Simple assemblies with sealing rings for domestic water drainage piping. End use test. Specification.) |
| NF T54-039-1988 | 塑料.未增塑聚氯乙烯压力管用密封圈的固定接头.使用特性.规范 | (Plastics. Unplasticized polyvinyl chloride pipes and fittings. Assembly by sealing rings for pressure pipelines. Fitness for use.) |
| NF T54-040-1977 | 塑料.未增塑聚氯乙烯模制配件.尺寸 | (PLASTICS.MOULDED UN-PLASTICIZED FITTINGS.DIMENSIONS.) |
| NF T54-041-1994 | 塑料管道系统.压力管道用弹性密封圈型接头的热注塑料配件.耐无轴向力短暂内压力性能的试验方法 | (Plastics piping systems. Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping. Test method for resistance to a short-term internal pressure without end thrust.) |
| NF T54-042-1994 | 塑料管道系统.压力管道用溶剂-水泥胶合接头的注模承窝配件 | (Plastics piping systems. Injection-moulded socket fittings for solvent-cemented joints for pressure piping. Test method for resistance to a short-term internal hydrostatic pressure.) |
| NF T54-044-1978 | 塑料.聚乙烯管与接头.按标定密度和热融流动指数命名的聚乙烯的名称 | (POLYETHYLENE (PE) PIPES AND FITTINGS. DESIGNATION OF POLYETHYLENE BASED ON NOMINAL DENSITY AND MELT FLOW INDEX.) |
| NF T54-045-1994 | 塑料管道和导管系统.压力管道系统用热注塑料配件.最大变形的挤撞试验法 | (Plastics piping and ducting systems. Injection-moulded thermoplastics fittings for pressure piping systems. Test method for maximum deformation by crushing.) |
| NF T54-048-1977 | 塑料.低密度聚乙烯管.物理试验用试样的制备 | (PLASTICS. LOW DENSITY POLYETHYLENE PIPES. PREPARATION OF SPECIMENS FOR PHYSICAL TESTING.) |
| NF T54-049-1977 | 塑料.聚乙烯管.管状聚乙烯基准密度的计算 | (EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF A PIPES.) |
| NF T54-050-1977 | 塑料.聚乙烯管.粒状聚乙烯基准密度的计算 | (EVALUATION OF THE REFERENCE DENSITY OF POLYETHYLENE IN FORM OF GRANULATES.) |
| NF T54-052-2001 | 人类饮用水输送用塑料管道系统.迁移评定.塑料管和配件及其接头迁移值的测定 | (Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints.) |
| NF T54-054-1997 | 塑料管道系统.未增塑聚氯乙烯端点负载轴承双插座连接件.当弯曲和受到内压时测定其防漏性和强度的试验方法 | (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double socket joints. Test method for leaktightness and strength while subjected to bending and internal pressure.) |
| NF T54-059-1995 | 压力管道和配件用热塑性塑料.分类和名称与符号.总体设备的设计系数 | (Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service (design) coefficient.) |
| NF T54-062-1-1999 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.聚丙烯(PP).第1部分:管道、配件和系统规范 | (Plastics piping systems for soils and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1 : specifications for pipes, fittings and the system.) |
| NF T54-063-1-2003 | 供水用塑料管道系统.聚乙烯.第1部分:总则 | (Plastics piping systems for water supply - Polyethylene (PE) - Part 1 : general.) |
| NF T54-063-1989 | 塑料.自来水网用的聚乙烯管子.规范和试验方法 | (PLASTICS. POLYETHYLENE PIPES FOR DRINKING WATER SUPPLY NETWORKS. SPECIFICATIONS AND TEST METHODS.) |
| NF T54-063-2-2003 | 供水用塑料管道系统.聚乙烯.第2部分:管道 | (Plastics piping systems for water supply - Polyethylene (PE) - Part 2 : pipes.) |
| NF T54-063-3-2003 | 供水用塑料管道系统.聚乙烯.第3部分:配件 | (Plastics piping systems for water supply - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-063-4-2003 | 供水用塑料管道系统.聚乙烯(PE).第4部分:阀 | (Plastics piping systems for water supply - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-063-5-2003 | 供水用塑料管道系统.聚乙烯.第5部分:系统适用性 | (Plastics piping systems for water supply - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-064-1990 | 塑料.带紧箍的半离合器系统(吉可曼系统).公称压力PN6 | (PLASTICS-HALF SYMMETRIC FITTING (GUILLEMIN SYSTEM) WITH LOCKING RING. NOMINAL PRESSURE PN 6.) |
| NF T54-065-1-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第1部分:总则 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1 : general.) |
| NF T54-065-2-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第2部分:管道 | (Plastics piping systems for the supply of gaseous fuels - Polythylene (PE) - Part 2 : pipes.) |
| NF T54-065-3-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第3部分:配件 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-065-4-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第4部分:阀门 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-065-5-2003 | 气体燃料的塑料管道供应系统.聚乙烯(PE).第5部分:系统的配合 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-072-1981 | 塑料.“5”聚乙烯管.规范 | (POLYETHYLENE PIPES “5“. SPECIFICATIONS.) |
| NF T54-075-1997 | 塑料管和管道系统.聚烯烃管和配件.氧化时间的测定(欧洲标准EN 728) | (Plastics piping and ducting systems. Polyolefin pipes and fittings. Determination of oxidation induction time.) |
| NF T54-076-1992 | 塑料.聚乙烯塑料管道系统.标称外径125以上导管的耐缓慢龟裂性.试验方法 | (Plastics. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter over 125. Test method.) |
| NF T54-077-1992 | 塑料.聚乙烯塑料管道系统.标称外径125及其以下导管的耐缓慢龟裂性.试验方法 | (Plastic. Polyethylene (pe) plastics piping systems. Resistance to slow cracking of pipes with a nominal external diameter up to 125. Test method.) |
| NF T54-078-1992 | 塑料.塑料管道系统用聚乙烯.极限应力强度因数的测定.试验方法 | (Plastics. Polyethylene (pe) for plastics piping systems. Determination of the limiting stress intensity factor. Test method.) |
| NF T54-080-2002 | 具有视觉特性的地下电缆和管线用塑料报警装置 | (Plastics warning devices for underground cables and pipelines with visual characteristics.) |
| NF T54-081-1987 | 塑料.饮用水供给用未增塑聚氯乙烯管(PVC-U).作为杂质的镉和汞的可萃取性 | (Plastics. Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply. Extractability of cadmium and mercury occurring as impurities.) |
| NF T54-082-1988 | 塑料.热固塑料阀.耐压和密封性试验 | (PLASTICS. THERMOPLASTIC AND THERMOSETTING VALVES. TEST OF RESISTANCE TO PRESSURE.) |
| NF T54-083-1991 | 热塑料制阀门.转矩.试验方法.(欧洲标准EN 28233) | (THERMOPLASTICS VALVES. TORQUE. TEST METHOD. (EUROPEAN STANDARD EN 28233).) |
| NF T54-084-1991 | 热塑料制阀门.耐疲劳强度.试验方法.(欧洲标准EN 28659) | (THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (EUROPEAN STANDARD EN 28659).) |
| NF T54-085-1988 | 塑料.液体压力管用网状线聚乙烯管.规范 | (Plastics. Reticulate polyethylene pipes for pipelines under pressure. Specifications.) |
| NF T54-086-1990 | 塑料.地下灌溉用未增塑聚氯乙烯管.规格 | (PLASTICS. UNPLASTICIZED POLY(VINYLCHLORIDE) (PVC-U) FOR UNDERGROUND IRRIGATION. SPECIFICATIONS.) |
| NF T54-087-1993 | 塑料管道系统.交联聚乙烯(PE-X)管.溶剂萃取法测定交联度 | (PLASTICS PIPING SYSTEMS. CROSSLINKED POLYETHYLENE (PE-X) PIPES. DETERMINATION OF DEGREE OF CROSSLINKING BY SOLVENT EXTRACTION. (EUROPEAN STANDARD EN 579).) |
| NF T54-090-1976 | 塑料.未增塑聚氯乙烯和氯化聚氯乙烯管件.管和接头颜色 | (PLASTICS. UNPLASTICIZED AND CHLORINATED PVC PIPES. COLOUR OF PIPES AND FITTINGS.) |
| NF T54-095-1985 | 塑料.未增塑聚氯乙烯管件接头粘合溶剂.使用特性 | (Adhesive with solvents for assembly of unplasticized PVC pipe elements. Characterization. Basic test methods.) |
| NF T54-096-1985 | 塑料.未增塑聚氯乙烯管元件装配用溶剂胶粘剂.适用性 | (ADHESIVES WITH SOLVENTS FOR ASSEMBLY OF UNPLASTICIZED PVC PIPE ELEMENTS. SUITABILITY FOR USE.) |
| NF T54-097-1995 | 塑料管道系统.热塑管.耐连续吹风的试验方法 | (Plastics piping and ducting systems. Thermoplastics pipes. Test method for resistance to external blows by the round-the-clock method.) |
| NF T54-099-1987 | 承压工业用热塑料管.耐化学因素和基本约束因素的测定.第1部分:聚烯烃管 | (THERMOPLASTICS PIPES FOR INDUSTRIAL APPLICATIONS UNDER PRESSURE. DETERMINATION OF THE CHEMICAL RESISTANCE FACTOR AND OF THE BASIC STRESS. PART 1 : POLYOLEFIN PIPES.) |
| NF T54-100-1997 | 塑料管道系统.热塑阀门.外部送风后阀门完好性的测试方法 | (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after an external blow.) |
| NF T54-101-1974 | 塑料.塑料板.外现和尺寸.检验方法 | (PLASTIC SHEET. PRESENTATION AND DIMENSIONS. METHODS OF CONTROL.) |
| NF T54-103-1996 | 塑料.聚甲基丙烯酸甲酯双合板和三合板.试验方法 | (PLASTICS. POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS. TEST METHODS. (EUROPEAN STANDARD EN ISO 12017).) |
| NF T54-104-1970 | 塑料.塑料膜.柔软性的评定.吊环法 | (PLASTICS. SHEETS. ESTIMATE OF FLEXIBILITY. SUSPENDED LOOP METHOD.) |
| NF T54-105-1973 | 塑料.塑料膜.受热后尺寸变化的测定.KAOLIN床法 | (PLASTICS SHEETS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER HEATING. KAOLIN BED METHOD.) |
| NF T54-106-1980 | 塑料.薄膜.粘接的评定.剥离法 | (Plastics. Sheets. Evaluation of the tendency to cohere. Peeling method.) |
| NF T54-107-1971 | 塑料.薄膜.抗撕断强度的测定（非多孔试验件） | (PLASTICS. THIN SHEETS. DETERMINATION OF TEAR RESISTANCE (NON PERFORATED TEST PIECE).) |
| NF T54-108-1971 | 塑料.薄膜.抗撕断扩张强度的测定 | (PLASTICS. THIN SHEETS. DETERMINATION OF RESISTANCE TO TEAR PROPAGATION.) |
| NF T54-109-1973 | 塑料.薄膜.自由击锤锥子法测定抗冲击强度.DART试验法 | (PLASTICS. SHEETS. IMPACT RESISTANCE BY THE FREE FALLING DART METHOD.) |
| NF T54-110-1971 | 塑料.薄膜.不脆化常规极限温度测定.（扣环冲击） | (PLASTICS. THIN SHEETS. DETERMINATION OF PLIABILITY LIMIT TEMPERATURE.(LOOPED TEST PIECE IMPACT TEST).) |
| NF T54-111-1971 | 塑料.聚乙烯透明塑料薄膜.通过对光线的扩散和传播计算测定混浊度 | (TRANSPARENT SHEETS OF POLYETHYLENE. DETERMINATION OF THE HAZE.) |
| NF T54-112-1980 | 塑料.薄膜.滑动性的测定.摩擦系数的测定 | (Plastics. Sheets. Determination of the slippage. Measuring the friction coefficients.) |
| NF T54-113-1971 | 塑料.薄膜.薄膜平展性的检验 | (PLASTICS MATERIALS. THIN SHEET. INSPECTION OF THE EVENNESS.) |
| NF T54-115-1973 | 塑料.薄膜.受热后尺寸变化的测定.浸泡法 | (PLASTIC SHEETS. DETERMINATION OF DIMENSIONAL VARIATIONS AFTER HEATING. IMMERSION METHOD.) |
| NF T54-116-1973 | 塑料.薄膜.抗穿孔强度的测定.穿孔法 | (PLASTIC. SHEETS. DETERMINATION OF RESISTANCE TO PERFORATION. PERFORAMETRE METHOD.) |
| NF T54-118-2001 | 塑料.在大气压力下薄膜和薄板的透气率的测定.测压法 | (Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method.) |
| NF T54-119-1976 | 塑料.增塑聚氯乙烯塑料薄膜.高频焊接试验常规方法 | (PLASTICS.PLASTICIZED PVC SHEETS. CONVENTIONAL TEST METHOD FOR HIGH FREQUENCY WELDING.) |
| NF T54-120-1976 | 塑料.薄膜.热焊接试验常规方法（热棒法） | (PLASTICS. SHEETS. ASSESSMENT OF SUITABILITY FOR THERMAL WELDING. (HOT BAR METHOD.)) |
| NF T54-121-1976 | 塑料.聚乙烯薄膜.化学试剂和恒定拉力作用下焊缝抗裂强度 | (PLASTICS. THIN POLYETHYLENE SHEETS. RESISTANCE TO SPLITTING OF WELDS UNDER TENSILE STRESS IN THE PRESENCE OF CHEMICAL AGENTS.) |
| NF T54-122-1976 | 塑料.薄膜.张力试验评定焊缝和或粘合质量 | (PLASTICS. SHEETS. ASSESSMENT OF THE QUALITY OF A WELD OR BOND BETWEEN TWO SHEET ELEMENTS BY MEANS OF A TENSILE TEST.) |
| NF T54-123-1987 | 塑料.塑料薄膜.抗破裂强度的测定 | (Plastics. Sheets. Determination of bursting strength.) |
| NF T54-124-1980 | 塑料薄膜和塑料片.印花特性 | (PLASTICS SHEETS AND FILMS. IMPRESSIBILITY.) |
| NF T54-125-1993 | 塑料.聚乙烯,乙烯共聚物及其混合物制热缩性薄膜.收缩应力的测定.试验方法 | (PLASTICS. HEATSHRINKABLE FILMS IN POLYETHYLENE, ETHYLEN COPOLYMERS AND THEIR MIXTURES. DETERMINATION OF THE SHRINKING AND CONTRACTION STRESSES. TEST METHOD.) |
| NF T54-140-1984 | 塑料.塑料片和塑料薄膜.抗撕裂强度的测定.第1部分:PANTALON撕裂法 | (PLASTICS. FILM AND SHEETING. DETERMINATION OF TEAR RESISTANCE. PART 1 : TROUSER TEAR METHOD.) |
| NF T54-141-1984 | 塑料.塑料片和塑料薄膜.抗撕裂强度的测定.第2部分:ELMENDORF法 | (PLASTICS. FILM AND SHEETING. DETERMINATION OF TEAR RESISTANCE. PART 2 : ELMENDORF METHOD.) |
| NF T54-150-1971 | 塑料.薄膜.卷轴内径 | (PLASTICS MATERIALS. SHEET. WINDING MANDRELS. INTERNAL DIAMETERS.) |
| NF T54-191-1994 | 塑料.农业用薄膜.缠结标记用可延伸薄膜.使用可膨胀性的测定 | (PLASTICS. FILMS FOR AGRICULTURAL USE. EXTENSIBLE THIN FILMS FOR TAPING AND SILAGE MAKING. DETERMINATION OF SWEETABILITY FOR USE.) |
| NF T54-192-2003 | 塑料.农业和园艺用塑料膜.安装和使用条件 | (Plastics - Plastics films for agriculture and horticulture - Conditions for installation and use.) |
| NF T54-195-2000 | 塑料.农业土壤消毒用薄膜.溴代甲烷隔膜规范和试验方法 | (Plastics - Films for agricultural soil desinfection - Specification for methyl bromide barrier films and test methods.) |
| NF T54-196-1-1997 | 塑料.可伸展薄膜.第1部分:可伸展薄膜特性测定的常规方法 | (PLASTICS. STRETCHABLE FILMS. PART 1 : CONVENTIONAL METHOD FOR DETERMINING THE PROPERTIES OF STRETCHABLE FILMS.) |
| NF T54-196-2-1998 | 塑料.可伸展薄膜.第2部分:螺旋箍装箱用可伸展薄膜适合性测定 | (PLASTICS. STRETCHABLE FILMS. PART 2 : DETERMINATION OF THE SUITABILITY FOR USE OF STRETCHABLE FILMS FOR HELICOID HOOP CASING.) |
| NF T54-300-1-2003 | 普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第1部分:总则 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1 : general.) |
| NF T54-300-2-2003 | 普通用水、排水、污水地上和地下压力系统用塑料管道系统.聚乙烯(PE).第2部分:管道 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 2 : pipes.) |
| NF T54-300-3-2003 | 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第3部分:管件 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 3 : fittings.) |
| NF T54-300-4-2003 | 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第4部分:阀门 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4 : valves.) |
| NF T54-300-5-2003 | 普通用水、排水、污水地下和地上压力系统用塑料管道系统.聚乙烯(PE).第5部分:系统的适用性 | (Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5 : fitness for purpose of the system.) |
| NF T54-401-1-2003 | 塑料.聚甲基丙烯酸甲酯薄板材.类型、尺寸和特性.第1部分:浇注薄板材 | (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1 : cast sheets.) |
| NF T54-401-2-1997 | 塑料.聚(甲基丙-烯酸甲酯)塑料薄片.类型,尺寸和性能.第2部分:熔压挤出薄片(EN ISO 7823-2) | (Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics. Part 2 : melt-calendered extruded sheets.) |
| NF T54-401-2-2003 | 塑料.聚甲基丙烯酸甲酯薄板材.类型、尺寸和特性.第2部分:挤制薄板材 | (Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2 : extruded sheets.) |
| NF T54-402-1995 | 塑料.聚碳酸酯薄板材.类型、尺寸和特性 | (PLASTICS. POLYCARBONATE SHEETS. TYPES, DIMENSIONS AND CHARACTERISTICS. (EUROPEAN STANDARD EN ISO 11963).) |
| NF T54-406-1996 | 塑料.园艺温室用单个或复合墙板.联合规范和特殊特点.评估方法 | (PLASTICS. SINGLE OR MULTIPLE WALL RIGID SHEETS FOR HORTICULTURAL GREENHOUSES. JOINT SPECIFICATIONS AND SPECIAL CHARACTERISTICS. ASSESSMENT METHODS.) |
| NF T54-422-2003 | 塑料.农业和园艺用热塑性塑料薄膜覆盖物 | (Plastics - Mulching thermoplastic films for use in agriculture and horticulture.) |
| NF T54-503-1976 | 塑料.轻塑料制品.拉力性能的测定 | (LIGHT PLASTICS PRODUCTS. DETERMINATION OF TENSILE PROPERTIES.) |
| NF T54-504-1976 | 塑料.轻塑料制品.弯曲试验 | (LIGHT PLASTICS PRODUCTS. BENDING TEST.) |
| NF T54-505-1976 | 塑料.轻塑料制品.抗冲击强度试验 | (LIGHT PLASTICS PRODUCTS. IMPACT RESISTANCE TEST.) |
| NF T54-601-1987 | 塑料夹层结构定义.机械特性的测定 | (Plastics based sandwich structures. Determination of mechanical properties. Definitions.) |
| NF T54-602-1983 | 塑料夹层结构.垂直挤压试验 | (PLASTICS BASED SANDWICH STRUCTURES. PERPENDICULAR COMPRESSION TEST.) |
| NF T54-603-1983 | 塑料夹层结构.垂直拉力试验 | (PLASTICS BASED SANDWICH STRUCTURES. PERPENDICULAR TENSILE TEST.) |
| NF T54-604-1986 | 塑料夹层结构.火焰弯曲或无火焰弯曲纵向挤压试验 | (Plastics based sandwich structures. Longitudinal compression test without or with buckling.) |
| NF T54-605-1983 | 塑料夹层结构.抗剪强度的测定 | (PLASTICS BASED SANDWICH STRUCTURES. DETERMINATION OF SHEAR STRENGTH.) |
| NF T54-606-1987 | 塑料夹层结构.弯曲试验 | (Plastics based sandwich structures. Bend test.) |
| NF T54-701-1988 | 塑料.热固树脂基层压板.规范 | (PLASTICS. INDUSTRIAL LAMINATED SHEETS BASED ON THERMOSETTING RESINS. SPECIFICATION.) |
| NF T54-801-1992 | 塑料.自助餐厅托盘.规范和试验方法 | (PLASTICS. TRAYS FOR SELF-SERVICE RESTAURANTS. SSPECIFICATION AND TEST METHODS.) |
| NF T54-803-1-1994 | 塑料.游泳池用增塑聚氯乙烯薄膜.规范和试验方法.第1部分:普通薄膜 | (PLASTICS. PLASTICIZED POLYVINYL CHLORIDE MEMBRANES FOR SWIMMING-POOLS. SPECIFICATIONS AND TEST METHODS. PART 1 : SIMPLE MEMBRANES.) |
| NF T54-803-2-1994 | 塑料.游泳池用增塑聚氯乙烯薄膜.规范和试验方法.第2部分:增强薄膜 | (PLASTICS. PLASTICIZED POLYVINYL CHLORIDE MEMBRANES FOR SWIMMING-POOLS. SPECIFICATIONS AND TEST METHODS. PART 2 : REINFORCED MEMBRANES.) |
| NF T54-900-2003 | 塑料管道和导管系统.用外推法测定热塑性塑料管道的长期静液压强度 | (Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation.) |
| NF T54-901-1995 | 塑料管道系统.非压力设备用热塑管道系统.不透水性试验方法(欧洲标准EN 1053) | (Plastics piping systems. Thermoplastics piping systems for non-pressure applications. Test method for watertightness.) |
| NF T54-902-1995 | 塑料管道系统.土壤和废料排出用热塑管道系统.粘接处密封度试验方法 | (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge. Test method for airtightness of joints.) |
| NF T54-903-1996 | 塑料管道系统.建筑物内排水管用热塑制管道系统.可载温度负荷的检验方法 | (Plastics piping systems. Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for resistance to elevated temperature cycling.) |
| NF T54-904-1996 | 塑料管线和管道系统.塑料管和配件.暴露在直接(自然)风化的方法 | (PLASTICS PIPING AND DUCTING SYSTEMS. PLASTICS PIPES AND FITTINGS. METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING. (EUROPEAN STANDARD EN 1056).) |
| NF T54-905-2002 | 塑料管道系统.热塑性压力管用端部承载或非端部承载组件和接头.内部水压下长期无漏损的试验方法 | (Plastics piping systems - End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping - Test method for long-term leaktightness under internal water pressure.) |
| NF T54-906-1996 | 塑料管道系统.埋置非压管道设备用热塑管道系统.弹性密封环型接头耐泄漏性试验方法 | (Plastics piping systems. Thermoplastics piping systems for buried non-pressure applications. Test methods for leaktightness of elastomeric sealing ring type joints.) |
| NF T54-910-1996 | 塑料管和防护管系统.热塑塑料管.用梯级法测定抗外冲击应力的能力 | (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. DETERMINATION OF RESISTANCE TO EXTERNAL BLOWS BY THE STAIRCASE METHOD. (EUROPEAN STANDARD EN 1411).) |
| NF T54-913-1996 | 塑料管道及保护管系统.热塑管.环形挠形测定 | (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS PIPES. DETERMINATION OF RING FLEXIBILITY. (EUROPEAN STANDARD EN 1446).) |
| NF T54-914-1-2000 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.丙烯腈-丁二烯-苯乙烯共聚物.第1部分:管道,配件和系统规 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : requirements for pipes, fittings and th) |
| NF T54-915-1-2000 | 建筑物内土和废物排放(高温和低温)用结构壁管的塑料管道系统.未增塑聚氯乙烯管(PVC-U).第1部分:管道和系统 | (Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for p) |
| NF T54-917-1-2000 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.聚乙烯(PE).第1部分:管道,配件和系统规范 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system.) |
| NF T54-918-1-1999 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.苯乙烯共聚物混合物(SAN+PVC).第1部分:管道,配件和系统规 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN + PVC) - Part 1 : specifications for pipes, fittings and the system.) |
| NF T54-919-1-1999 | 建筑物内污物和污水排放(低、高温)用塑料管道系统.氯化聚氯乙烯(PVC-C).第1部分:管道,配件和系统规范 | (Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : specifications for pipes, fittings and the system.) |
| NF T54-920-1997 | 塑料管道系统.聚乙烯管道系统用阀门.在工作机构弯头处和弯头之后的防漏试验方法(欧洲标准EN 1680) | (Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism.) |
| NF T54-921-1997 | 塑料管道系统.热塑阀门.弯曲下温度周期变化后阀门完好性的测试方法 | (Plastics piping systems. Thermoplastics valves. Test method for the integrity of a valve after temperature cycling under bending.) |
| NF T54-922-1997 | 塑料管道系统.聚乙烯放液T形管.组装放液T形管耐冲击的试验方法(欧洲标准EN 1716) | (Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee.) |
| NF T54-923-2000 | 塑料管道系统.与未增塑聚氯乙烯管一起使用的未增塑聚氯乙烯弹性密封环式套筒接头.负压下密封试验法 | (Plastics piping systems - Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC-U pipes - Test method for leaktightness under negative pressure.) |
| NF T54-924-1999 | 塑料管道系统.未增塑聚(氯乙烯)(PVC-U)配件和材料.依据总氯含量的PVC含量的估计方法(EN 1905) | (Plastics piping systems. Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material. Method for assessment of the PVC content based on total chlorine content.) |
| NF T54-925-1999 | 塑料管道系统.热塑螺旋成型承重管道.接缝处抗拉强度的测定 | (PLASTICS PIPING AND DUCTING SYSTEMS. THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES. DETERMINATION OF THE TENSILE STRENGTH OF A SEAM. (EUROPEAN STANDARD EN 1979).) |
| NF T54-927-1999 | 塑料管道系统.热塑配件.冲击强度的试验方法(EN 12061) | (PLASTICS PIPING SYSTEMS. THERMOPLASTICS FITTINGS. TEST METHOD FOR IMPACT STRENGTH. (EUROPEAN STANDARD EN 12061).) |
| NF T54-928-1997 | 塑料管道系统.雨水排放管道系统用托架.托架强度的测试方法 12095) | (Plastics piping system. Brackets for rainwater piping systems. Test method for bracket strength.) |
| NF T54-929-1997 | 塑料管道系统:聚乙烯管用材料和元件.挥发物含量测定 | (Plastics piping systems. Polyethylene piping materials and components. Determination of volatile content.) |
| NF T54-930-1997 | 塑料管道系统.聚乙烯(PE)阀.支架间耐弯曲试验方法 | (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to bending between supports.) |
| NF T54-931-1997 | 塑料管道系统.聚乙烯(PE)管.挤出后耐内压试验方法 | (PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) PIPES. TEST METHOD FOR THE RESISTANCE TO INTERNAL PRESSURE AFTER APPLICATION OF SQUEEZE-OFF. (EUROPEAN STANDARD EN 12106).) |
| NF T54-932-1997 | 塑料管道系统.注模热塑配件配件、阀和附属设备.管道元件注模用热塑材料长期液压强度的测定 | (Plastics piping systems. Injection-moulded thermoplastics fittings, valves and ancillary equipment. Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components.) |
| NF T54-934-1997 | 塑料管道系统.管件,阀和附件.气流率/压降关系的测定 | (Plastics piping systems. Fittings, valves and ancillaries. Determination of gaseous flow rate/pressure drop relationships.) |
| NF T54-935-1997 | 塑料管道系统.比色法测定热塑材料的含水量 | (Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.) |
| NF T54-936-1997 | 塑料管道系统.聚乙烯(PE)阀.耐热循环试验方法(欧洲标准EN 12119) | (Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling.) |
| NF T54-937-2000 | 塑料管道系统.与未增塑聚氯乙烯管一起使用的弹性密封环式套筒接头.内压下角度偏转密封试验法 | (Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with ang) |
| NF T54-939-1998 | 塑料管道系统.热塑塑料配件.组装配件的机械拉伸强度或柔韧性的试验方法 | (Plastics piping systems. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings.) |
| NF T54-940-1999 | 塑料管道系统.冷热水输送用热塑性管和配件.安装组件耐温度循环的试验方法 | (PLASTICS PIPING SYSTEMS. THERMOPLASTICS PIPES AND FITTINGS FOR HOT AND COLD WATER. TEST METHOD FOR THE RESISTANCE OF MOUNTED ASSEMBLIES TO TEMPETARURE CYCLING. (EUROPEAN STANDARD EN 12293).) |
| NF T54-941-1999 | 塑料管道系统.热水和冷水系统.真空密封性的检验方法 | (Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum.) |
| NF T54-942-1999 | 塑料管道系统.输送热水和冷水用的热塑管和附属配件.连接件对压力变化负载的稳定性的检测方法 | (Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling.) |
| NF T54-945-1998 | 压力下流体运输用塑料管.Miner法则.累积损伤的计算方法 | (PLASTICS PIPES FOR THE CONVEYANCE OF FLUIDS UNDER PRESSURE. MINER`S RULE. CALCULATION METHOD FOR CUMULATIVE DAMAGE. (EUROPEAN STANDARD EN ISO 13760).) |
| NF T54-946-2003 | 工业用塑料管道系统.聚丁烯(PE)、聚乙烯(PE)和聚丙烯(PP).元件和系统规范.米制系列 | (Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series.) |
| NF T54-949-2003 | 翻新用塑料管道系统的分类和设计指南 | (Guidance on the classification and design of plastics piping systems used for renovation.) |
| NF T54-956-2003 | 塑料管道系统.塑料管道和配件.暴露于自然风化下的方法 | (Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (naturel) weathering.) |
| NF T54-965-2003 | 气态燃料供应用塑料管道系统.聚乙烯(PE).管的包装、存储、搬运和运输用规范 | (Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Specifications for the packaging, the storage, the handling and the transportation of the pipes.) |
| NF T56-001-1980 | 软和硬微孔塑料词汇 | (Vocabulary of rigid and flexible cellular plastics.) |
| NF T56-102-1976 | 合成橡胶或塑料微孔制品.硬微孔材料的弯曲试验 | (ELASTOMER OR PLASTICS BASED CELLULAR PRODUCTS. BENDING TEST ON RIGID CELLULAR MATERIALS.) |
| NF T56-103-1979 | 橡胶或塑料微孔材料.硬微孔材料抗拉特性的测定 | (CELLULAR MATERIALS BASED ON RUBBER OR PLASTICS. DETERMINATION OF TENSILE PROPERTIES OF RIGID CELLULAR MATERIALS.) |
| NF T56-104-1978 | 橡胶或塑料微孔材料.硬微孔材料抗常规穿孔应力的测定 | (RUBER OR PLASTICS BASED CELLULAR PRODUCTS. DETERMINATION OF PUNCHING PROOF STRESS OF RIGID CELLULAR MATERIALS.) |
| NF T56-106-1979 | 橡胶或塑料微孔材料.硬微孔材料在70℃时水分和其它挥发性物质含量的测定 | (CELLULAR MATERIALS BASED ON RUBBER OR PLASTICS. DETERMINATION OF THE CONTENT OF WATER AND OTHER MATERIALS VOLATILE AT 70 DEGREES C IN RIGID CELLULAR MATERIALS.) |
| NF T56-107-1995 | 泡沫橡胶和塑料.表观密度的测定 | (Cellular plastics and rubbers. Determination of apparent (bulk) density.) |
| NF T56-108-1979 | 橡胶或塑料微孔材料.软微孔材料断裂伸长度和抗拉力强度的测定 | (RUBBER OR PLASTICS CELLULAR MATERIALS. DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK FOR FLEXIBLE CELLULAR MATERIALS.) |
| NF T56-116-1979 | 橡胶或塑料微孔材料.软微孔材料长久压痕负荷静力疲劳试验 | (RUBBER OR PLASTICS CELLULAR MATERIALS. STATIC FATIGUE TEST UNDER CONSTANT INDENTATION FORCE FLEXIBLE CELLULAR MATERIALS.) |
| NF T56-117-1979 | 橡胶或塑料微孔材料.软和硬微孔塑料加速老化试验 | (RUBBER OR PLASTIC CELLULAR PRODUCTS. ACCELERATED AGEING TESTS. RIGID AND FLEXIBLE CELLULAR PRODUCTS.) |
| NF T56-119-1995 | 泡沫塑料和橡胶.线性尺寸的测定 | (Cellular plastics and rubbers. Determination of linear dimensions.) |
| NF T56-120-1987 | 硬多孔塑料.压缩蠕变测定 | (Cellular plastics, rigid. Determination of compressive creep.) |
| NF T56-121-1983 | 硬微孔塑料.板状硬塑制品平均线性尺寸的测定 | (Determination of the average linear dimensions of rigid cellular products in sheet form.) |
| NF T56-122-1984 | 橡胶或塑料微孔制品.永久变形的测定.无负荷试验 | (Rubber or plastics based materials. Determination of residual deformation. Test without stress.) |
| NF T56-123-1974 | 合成橡胶或塑料微孔制品.微孔材料在一定时间内吸水性的测定 | (CELLULAR PRODUCTS OF ELASTOMER OR PLASTICS. DETERMINATION OF WATER ABSORPTION OF CELLULAR MATERIALS OVER A GIVEN PERIOD OF TIME.) |
| NF T56-126-1995 | 泡沫橡胶和塑料.动态弹性的测定 | (Cellular rubbers and plastics. Determination of dynamic cushioning performance.) |
| NF T56-128-1977 | 橡胶或塑料硬微孔材料.硬材料中等线性收缩系数的测定 | (RIGID RUBBER OR PLASTICS BASED CELLULAR MATERIALS. DETERMINATION OF THE MEAN COEFFICIENT OF LINEAR CONSTRUCTION.) |
| NF T56-129-1995 | 泡沫塑料.硬质材料开口的和封闭的气室容积百分数的测定 | (Cellular plastics. Determination of volume percentage of open and closed cells of rigid materials.) |
| NF T56-129-2003 | 硬质泡沫塑料.开口和封闭气室容积百分数测定 | (Rigid cellular plastics - Determination of volume percentage of open cells and closed cells.) |
| NF T56-130-1984 | 橡胶或塑料微孔制品.硬微孔制品横向凝聚力的测定 | (Rubber or plastics based cellular materials. Rigid cellular materials. Determination of the transverse cohesion.) |
| NF T56-133-2002 | 泡沫塑料.聚乙烯.试验方法 | (Cellular plastics - Polyethylene - Methods of test.) |
| NF T56-136-1999 | 硬质泡沫塑料.自结皮高密度材料的试验方法(EN ISO 9054) | (CELLULAR PLASTICS, RIGID. TEST METHODS FOR SELF-SKINNED, HIGH DENSITY MATERIALS. (EUROPEAN STANDARD EN ISO 9054).) |
| NF T56-200-1988 | 塑料.合成橡胶和塑料微孔制品.硬微孔板.规范 | (Plastics. Rigid cellular materials in the form of sheets. Specification plan.) |
| NF T56-201-1988 | 塑料.合成橡胶和塑料微孔制品.硬聚苯乙烯泡沫材料模塑板.规范 | (Plastics. Rigid cellular materials in the form of expanded polystyrene sheets obtained by casting. Specifications.) |
| NF T56-203-1988 | 塑料.橡胶或塑料微孔材料.聚氨基甲酸酯硬微孔板.规范 | (Plastics. Rigid cellular materials in the form of polyurethane sheets. Specifications.) |
| NF T57-050-1977 | 玻璃织物增强塑料.调节和试验用标准大气压 | (Glass reinforced plastics. Standard atmospheres for conditioning and testing .) |
| NF T57-100-1973 | 玻璃织物增强塑料.可见缺陷定义 | (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. DEFINITION OF VISUAL DEFECTS.) |
| NF T57-103-2000 | 纤维增强塑料复合材料.平面方向压缩性的测定 | (Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction.) |
| NF T57-104-1998 | 织物增强塑料复合物.短束法对表面内层剪切强度的测定 | (Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method.) |
| NF T57-105-1998 | 纤维增强塑料复合材料.挠性性能的测定 | (Fibre-reinforced plastic composites - Determination of flexural properties.) |
| NF T57-106-1977 | 玻璃织物增强塑料.BARCOL硬度计法测量硬度 | (Glass reinforced plastics. Measurement of hardness by means of a barcol impressor .) |
| NF T57-107-1986 | 玻璃织物增强塑料.热水处理后性能变化的测定 | (Glass-fibre-reinforced plastics. Measurement of the change of characteristics during hot water treatment.) |
| NF T57-108-1979 | 玻璃织物增强塑料.抗冲击性能的测定.夏氏摆绳冲击法 | (TEXTILE GLASS REINFORCED PLASTICS. DETERMINATION OF IMPACT STRENGTH. CHARPY METHOD.) |
| NF T57-110-1994 | 不饱和聚合树脂基增强塑料.残留的苯乙烯单体含量的测定 | (Reinforced plastics based on unsaturated polyester resins. Determination of residual styrene monomer content.) |
| NF T57-151-1978 | 玻璃织物增强塑料.热固性树脂拉力试件单向增强塑料板的制备 | (GLASS TEXTILE REINFORCED PLASTICS. PREPARATION OF SHEETS OF THERMOSETTING RESINS WITH UNIDIRECTIONAL REINFORCEMENT FOR TENSILE TEST SPECIMENS.) |
| NF T57-153-1-2002 | 纤维增强塑料.试验板的制备方法.第1部分:通用条件 | (Fibre-reinforced plastics - Methods of producing test plates - Part 1 : general conditions.) |
| NF T57-153-2-2002 | 纤维增强塑料.试验板的生产方法.第2部分:接触模压法和喷射成形法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 2 : contact and spray-up moulding.) |
| NF T57-153-3-2002 | 纤维增强塑料.试验板的生产方法.第3部分:湿压缩模塑法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 3 : wet compression moulding.) |
| NF T57-153-5-2002 | 纤维增强塑料.试验板的生产方法.第5部分:长纤维卷绕法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 5 : filament winding.) |
| NF T57-153-6-2003 | 纤维增强塑料.试验用板材的生产方法.第6部分:挤拉模塑法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 6 : pultrusion moulding.) |
| NF T57-153-7-2002 | 纤维增强塑料.试验板的生产方法.第7部分:树脂压铸法 | (Fibre-reinforced plastics - Methods of producing test plates - Part 7 : resin transfer moulding.) |
| NF T57-153-9-2003 | 纤维增强塑料.试验板的制备方法.第9部分:GMT/STC模制 | (Fibre-reinforced plastics - Methods of producing test plates - Part 9 : moulding of GMT/STC.) |
| NF T57-154-1993 | 玻璃织物增强塑料.通过袋模单向增强的板材的制备 | (GLASS-REINFORCED PLASTICS. PREPARATION OF PLATES WITH UNIDIRECTIONAL REINFORCEMENTS BY BAG MOULDING.) |
| NF T57-155-1998 | 塑料.热塑铸模化合物.SMC中纤维湿气级别测定 | (Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC.) |
| NF T57-156-1998 | 塑料.纤维增强化合物.SMC、BMC和DMC压缩铸模试验板的制备 | (Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC.) |
| NF T57-160-1-1994 | 玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第1部分:树脂棒的准备 | (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 1 : GENERAL CONSIDERATIONS AND PREPARATION OF RODS.) |
| NF T57-160-2-1994 | 玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第2部分:树脂棒柔性强度的测定 | (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 2 : DETERMINATION OF FLEXURAL STRENGTH.) |
| NF T57-160-3-1994 | 玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第3部分:树脂棒耐压强度的测定 | (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 3 : DETERMINATION OF COMPRESSIVE STRENGTH.) |
| NF T57-160-4-1994 | 玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第4部分:树脂棒外观线性分层剪切强度的测定 | (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 4 : DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH.) |
| NF T57-204-1996 | 塑料管道系统.玻璃增强热固性塑料(GRP)管.耐长期内部压力性能的测定 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of long-term resistance to internal pressure.) |
| NF T57-210-1994 | 塑料管道系统.玻璃纤维增强塑料部件.用重力法测定组分用量 | (Plastics piping systems. Glass-reinforced plastics components. Determination of the amounts of constituents using the gravimetric method.) |
| NF T57-211-1994 | 塑料管道系统.玻璃增强热固性塑料管和配件.回归分析及其使用方法 | (Plastics piping sytems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Methods for regression analysis and their use.) |
| NF T57-212-1994 | 塑料管道系统.玻璃增强热固性管子.干燥条件蠕变系数的测定 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor dry conditions.) |
| NF T57-214-1-1998 | 地下排水系统和压力下污水排放的塑料管道系统.基于不饱和聚酯 树脂(UP)的玻璃增强热固塑料.第1部分:一般性( | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 1 : general.) |
| NF T57-214-3-1996 | 压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第3部分:配件 | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsaturated polyester resin (up). Part 3 : fittings.) |
| NF T57-214-5-1996 | 压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第5部分:接头的适用性 | (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.) |
| NF T57-215-1996 | 塑料管道系统.玻璃增强热固性塑料管和配件接头.挠性和铰链接头耐泄漏和损伤试验方法 | (Plastics piping systems. Joints for glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints.) |
| NF T57-216-1996 | 塑料管道系统.玻璃增强热固塑料管和配件.挠曲条件下部件内部耐化学侵蚀性的测定 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Determination of the resistance to chemical attack from the inside of a section in a deflected condition.) |
| NF T57-217-1996 | 塑料管道系统.玻璃纤维增强热固性塑料管.潮湿条件下蠕变因子的测定和长期指定环的硬度的计算 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness.) |
| NF T57-218-1996 | 塑料管道系统.玻璃纤维增强热固塑料(GFK).检验原有环挠曲的试验方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Test method to prove the resistance to initial ring deflection.) |
| NF T57-219-1999 | 塑料管道系统. 玻璃增强的热固塑料管(GRP).在潮湿条件下长临界相关环变形的测定(EN 1227) | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions.) |
| NF T57-220-1996 | 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管.测定指定环初始硬度 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial specific ring stiffness.) |
| NF T57-221-1996 | 塑料管道系统.玻璃纤维增强热固塑料管和配件.短期内部压力下管壁密封性的检验的试验方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes and fittings. Test methods to prove the leaktightness of the wall under short-term internal pressure.) |
| NF T57-222-1996 | 塑料管道系统.玻璃纤维增强热固塑料管.初始纵向拉伸性能的测定 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination of initial longitudinal tensile properties.) |
| NF T57-223-1996 | 塑料管道系统.玻璃增强热固性塑料(GRP)管.初期表面抗拉强度的测定 | (Plastics piping systems. Glass-reinforced thermosetting plastics (grp) pipes. Determination O the apparent initial circumferential tensile strength.) |
| NF T57-224-1997 | 塑料管道系统.玻璃纤维增强热固性塑料(GRP)构件.检验带有弹性密封件的刚性锁定的管套筒接头设计的试验方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals.) |
| NF T57-225-1997 | 塑料管道系统.玻璃纤维增强热固性塑料元件.验证胶合管套筒接头设计的测试方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) components. Test methods to prove the design of cemented socket-and-spigot joints.) |
| NF T57-226-1996 | 塑料管道系统.玻璃增强热固性塑料元部件.栓结法兰联轴节的设计验证试验方法 | (Plastics piping systems. Glas-reinforced thermosetting plastics (grp) components. Test methods to prove the design of bolted flange joints.) |
| NF T57-227-1997 | 塑料管道系统.玻璃增强热固性塑料(GRP)管.周期性内部压力影响的试验方法 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Test method for the effects of cyclic internal pressure.) |
| NF T57-229-1997 | 塑料管道系统.玻璃纤维增强热固性塑料管.在化学环境下存放后相对弯曲蠕变系数的测定 | (Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the relative flexural creep factor following exposure to a chemical environment.) |
| NF T57-303-1989 | 塑料.碳纤维增强复合材料.层间剪切应力的测定.短跨距弯曲的方法 | (PLASTICS. CARBON REINFORCED COMPOSITES. DETERMINATION OF INTERLAMINAR SHEAR STRENGTH. FLEXURE METHOD WITH SHORT SPAN LENGHT.) |
| NF T57-402-1998 | 织物增强塑料复合物.通过加上最小45级拉力试验方法对水平剪切应力/剪切拉力反应包括水平剪切模式和强度的测 | (FIBRE-REINFORCED PLASTIC COMPOSITES. DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE PLUS OVER MINUS 45 DEGREES TENSION TEST METHOD. (EUROPEAN STANDARD EN ISO 14129).) |
| NF T57-404-2002 | 纤维增强塑料复合材料.无定向性增强材料的模型I层间断裂韧度G | (Fibre-reinforced composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials.) |
| NF T57-500-1989 | 塑料.聚酯胶片.术语定义和牌号的符号 | (Plastics. Prepregs. Definitions of terms and symbols for designations.) |
| NF T57-513-1973 | 玻璃织物增强塑料.聚酯树脂预浸垫.塑性的测定 | (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. PLASTICITY.) |
| NF T57-514-1973 | 玻璃织物增强塑料.聚酯树脂预浸垫.可模制性 | (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. MOULDABILITY.) |
| NF T57-515-1973 | 玻璃织物增强塑料.聚酯树脂预浸垫.膨胀性测定 | (PRE-IMPREGNATED PRODUCTS BASED ON MATS MADE OF GLASS AND POLYESTER RESINS. MEASUREMENT OF EXPANSION.) |
| NF T57-530-1991 | 塑料.预浸渍.由BMC和DMC物质构成的铸模用混合料 | (PLASTICS. PREPREGS. BULK MOULDING COMPOUND (BMC) AND DOUGH MOULDING COMPOUND (DMC). BASIS FOR A SPECIFICATION.) |
| NF T57-555-1973 | 玻璃织物增强塑料.环氧树脂预浸织物.拉力和剪力方法测定对铜的附着力 | (PRE-IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS : DETERMINATION OF ADHESION ON COPPER BY A METHOD INVOLVING SHEARING UNDER TRACTION.) |
| NF T57-556-1973 | 玻璃织物增强塑料.预浸玻璃织物.加压和焙烧后预浸层厚度的测定 | (PRE-IMPREGNATED GLASS FABRICS. DETERMINATION OF THE THICKNESS OF A LAYER OF PRE-IMPREGNATED PRODUCT AFTER PRESSING AND CURING.) |
| NF T57-557-1973 | 玻璃织物增强塑料.预浸玻璃织物.焙烧损失的测定 | (PRE-IMPREGNATED GLASS FABRICS. DETERMINATION OF LOSS THROUGH CALCINATION.) |
| NF T57-559-1975 | 玻璃织物增强塑料.环氧树脂预浸玻璃织物.粘合时间 | (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS - PRE IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS - BINDING TIME.) |
| NF T57-571-1984 | 玻璃织物增强塑料.预浸件.台布.纱、压层件.焙烧损失的测定 | (GLASS FIBRE REINFORCED PLASTICS. PREIMPREGNATED MATS,YARNS AND ROVINGS. DETERMINATION OF IGINITION LOSS.) |
| NF T57-608-1999 | 纤维增强塑料.模压化合物和聚酯胶片.树脂、增强纤维和矿物填料含量的测定.溶解方法 | (Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforced-fibre and mineral-filler content. Dissolution methods.) |
| NF T57-615-1997 | 纤维增强塑料.热固模塑混合物和预浸料.流动性和贮藏寿命的测定(欧洲标准EN ISO 12115) | (FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF FLOWABILITY AND SHELF LIFE. (EUROPEAN STANDARD EN ISO 12115).) |
| NF T57-800-1-2003 | 增强塑料复合材料.挤拉制型材规范.第1部分:命名 | (Reinforced plastics composites - Specifications for pultruded profiles - Part 1 : designation.) |
| NF T57-800-2-2003 | 增强塑料复合材料.挤拉制型材规范.第2部分:试验方法和一般要求 | (Reinforced plastics composites - Specifications for pultruded profiles - Part 2 : methods of test and general requirements.) |
| NF T57-800-3-2003 | 增强塑料复合材料.挤拉制型材规范.第3部分:特殊要求 | (Reinforced plastics composites - Specifications for pultruded profiles - Part 3 : specific requirements.) |
| NF T57-900-1987 | 增强塑料物质制贮器和设备结构规定 | (GLASS-REINFORCED PLASTIC TANKS AND APPARATUS. CONSTRUCTION CODE.) |
| NF T57-901-1997 | 玻璃纤维增强塑料(GRP)制地下油罐.单面处于液体环境的试验方法 | (Underground tanks of glass-reinforced plastics (GRP). Method for one side exposure to fluids.) |
| NF T57-902-1997 | 玻璃纤维增强塑料(GRP)制地下油罐.系数α和β的测定 | (Underground tanks of glass-reinforced plastics (GRP). Determination of factor alpha and factor beta.) |
| NF T58-000-1987 | 塑料.(热固塑料和热塑)塑料模制件适用公差 | (Plastics. Tolerances applicable to the plastics moulded parts (thermosetting and thermoplastic).) |
| NF T58-003-1994 | 塑料.热塑材料取样用压模 | (Plastics. Compression moulding test specimens of thermoplastic materials.) |
| NF T58-003-2003 | 塑料.热塑材料的压塑试样 | (Plastics - Compression moulding test specimens of thermoplastic materials.) |
| NF T58-004-1997 | 塑料.多用途试验用试样 | (Plastics. Multipurpose-test specimens.) |
| NF T58-005-1998 | 塑料.热固性材料试样的压缩模制 | (Plastics. Compression moulding of test specimens of thermosetting materials.) |
| NF T58-100-1971 | 塑料.金属表面涂层.干法塑料.涂层规范形式 | (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS.(DRY APPLICATION). SPECIFICATION.) |
| NF T58-110-1971 | 塑料.金属表面涂层.干法塑料涂层.厚度检验 | (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. METHODS OF THICKNESS DETERMINATION.) |
| NF T58-112-1971 | 金属表面涂层.塑料涂层.剥离法检验附着力 | (PLASTICS MATERIALS. SURFACE COATING OF METALS. PLASTICS COATINGS. ADHESION TEST.) |
| NF T76-113-1983 | 水胶.氨基塑料.不同温度下胶凝固时间的常规测定 | (WATER ADHESIVES. AMINOPLASTIC. DETERMINATION OF CONVENTIONAL GEL TIME AT DIFFERENT TEMPERATURES.) |
| NF T76-131-1989 | 塑料地板用的粘合剂.特性试验方法的目录 | (ADHESIVES FOR PLASTIC FLEXIBLE FLOOR COVERINGS. LIST OF CHARACTERIZATION TEST METHODS.) |
| NF T76-132-1989 | 塑料地板用的粘合剂.剥离试验用PVC材料 | (ADHESIVES FOR PLATIC FLEXIBLE FLOOR COVERINGS. PVC MATERIAL FOR PEEL TEST.) |
| NF T76-151-1992 | 承重木结构用苯酚树脂系列和氦基塑料系列粘合剂:分类及性能要求 | (ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD BEARING TIMBER STRUCTURES : CLASSIFICATION AND PERFORMANCE REQUIREMENTS. (EUROPEAN STANDARD EN 301).) |
| NF X41-513-1961 | 塑料防护.第1部分：成分耐微生物侵蚀的能力的试验方法 | (PROTECTION OF PLASTICS. PART 1. TESTING METHOD FOR RESISTANCE OF INGREDIENTS TO MICROORGANISMS.) |
| NF X41-515-1962 | 塑料防护.第3部分：器材和设备耐微生物侵蚀能力的试验方法 | (PROTECTION OF PLASTICS. PART 3. TESTING METHOD FOR RESISTANCE OF EQUIPMENT AND APPARATUS TO MICROORGANISMS.) |
| XP T54-034-1999 | 塑料.在液态食物,热水,工业用液体压力下传输用未增塑聚(氯乙烯)(PVC-U)管道.增压液体用减速规则的制定和规 | (Plastics - Unplasticized poly(vinyl chloride) (PVC-U) piping for conveyance under pressure of liquid foodstuffs, thermal water and industrial liquids - Specifications and setting of the derating rules for pressurized liquids.) |
| 编号 | 中文名称 | 英文名称 |