编号 | 中文名称 | 英文名称 |
BS 2067-1953
| 绝缘材料的功率因子与电容率的测定(哈特逊和瓦德法)
| Determination of power-factor and permittivity of insulating materials (Hartshorn & Ward method)
|
BS 2692-3-1990
| 1000V以上交流电熔断器.第3部分:短路功率因数测定指南
| Fuses for voltages exceeding 1000 V a.c. Guide to the determination of short circuit power factor
|
BS 4409-3-1982
| 螺旋输送机.第3部分:传动功率计算方法
| Screw conveyors - Method for calculating drive power
|
BS 5000-11-1973
| 特种或专用旋转电机.第11部分:小功率电动机和发电机
| Specification for rotating electrical machines of particular types or for particular applications - Small-power electric motors and generators
|
BS 5410-1-1998
| 燃油规范.第1部分:输出功率小于等于45KW的环流供暖及热水供应锅炉装置
| Code of practice for oil firing - Installations up to 45 kW output capacity for space heating and hot water supply purposes
|
BS 5410-2-1978
| 烧油惯例.第2部分:输出功率大于等于45kW的空间加热、热水和蒸汽供应设备
| Code of practice for oil firing - Installations of 45 kW and above output capacity for space heating, hot water and steam supply services
|
BS 5514-7-1996
| 往复式内燃机性能.第7部分:发动机功率规程
| Reciprocating internal combustion engines: performance - Codes for engine power
|
BS 5654-2-1979
| 直流输出稳压电源.第2部分:额定功率与性能规定方法
| Stabilized power supplies, d.c. output - Method of specifying rating and performance
|
BS 5760-10.5-1993
| 系统、设备和部件可靠性.第10部分:可靠性试验指南.第5节:成功率合格试验方案
| Reliability of systems, equipment and components - Guide to reliability testing - Compliance test plans for success ratio
|
BS 5944-4-1984
| 液压动力系统和部件空气噪音测量.第4部分:流量和压力控制阀声功率级测定方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure
|
BS 5944-5-1985
| 液压系统和部件气动噪音测量.第5部分:使消声室测定液压泵声功率等级的简易方法
| Measurement of airborne noise from hydraulic fluid power systems and components - Simplified method of determining sound power levels from pumps using an anechoic chamber
|
BS 5986-1980
| 热输入功率为60kW到2MW的燃气对流式加热器的电安全性和性能规范
| Specification for electrical safety and performance of gas fired space heating appliances with inputs 60 kW to 2 MW
|
BS 6347-2-1983
| 农用拖拉机性能评定.第2部分:液压功率和提升能力测定方法
| Performance assessment of agricultural tractors - Methods for determination of hydraulic power and lifting capacity
|
BS 6347-7-1993
| 农用拖拉机性能评定.第7部分:轴功率测定方法
| Performance assessment of agricultural tractors - Method for determination of axle power
|
BS 6583-1985
| 中央通风装置风机区额定功率的体积测定试验方法(包括功率分级指南)
| Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)
|
BS 6590-1985
| 机械的开式压力机的额定功率和尺寸规范
| Specification for capacity ratings and dimensions of power presses, mechanical open front type
|
BS 6644-2005
| 额定输入功率在70 kW(净功率)和1.8 MW(净功率)之间(2类和3类家用煤气)的燃气热水锅炉的安装规范
| Specification for Installation of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)
|
BS 6798-2000
| 额定输入功率不超过70kW的燃气锅炉的安装规范
| Specification for installation of gas-fired boilers of rated input not exceeding 70 kW net
|
BS 6880-1-1988
| 输出功率大于45kW的低温热水加热系统实用规程.基本原理和设计
| Code of practice for low temperature hot water heating systems of output greater than 45 kW - Fundamental and design considerations
|
BS 6880-2-1988
| 输出功率大于45kW的低温热水加热系统实用规程.设备选择
| Code of practice for low temperature hot water heating systems of output greater than 45 kW - Selection of equipment
|
BS 6880-3-1988
| 输出功率大于45kW的低温热水加热系统实用规程.安装、交付使用和维护
| Code of practice for low temperature hot water heating systems of output greater than 45 kW - Installation, commissioning and maintenance
|
BS 6911-4-1998
| 运土机械试验.发动机试验法规.净功率
| Testing earth-moving machinery - Engine test code - Net power
|
BS 6999-1989
| 最大输出功率为45kW的固体燃料设备用搪瓷低碳钢烟道管、其他部件和附件的规范
| Specification for vitreous-enamelled low-carbon-steel flue pipes , other components and accessories for solid-fuel-burning appliances with a rated output of 45 kW
|
BS 7036-4-1996
| 行人用动力门安全性实用规程.低功率旋转门
| Code of practice for safety at powered doors for pedestrian use - Low energy swing doors
|
BS 7698-8-1996
| 往复式内燃机驱动的交流发电机组.低功率发电机组要求和试验
| Reciprocating internal combustion engine driven alternating current generating sets - Requirements and tests for low-power generating sets
|
BS 7821-4-1995
| 小于36KV设备的带有最高电压值50Hz、50-2500KVA三相油浸式配电变压器.载有非正弦电流的变压器额定功率测定
| Three phase oil-immersed distribution transformers, 50 Hz, from 50 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with non-sinusoidal currents
|
BS 7844-3-1998
| 小于36KV设备的最高电压值为50Hz、100-2500KVA三相干式配电变压器.负载非正弦电流的变压器额定功率的测定
| Three-phase dry-type distribution transformers 50 Hz, from 100 to 2500 kVA with highest voltage for equipment not exceeding 36 kV - Determination of the power rating of a transformer loaded with non-sinusoidal current
|
BS 7854-3-1998
| 机械振动.通过测量非旋转零件对机械振动的评估.现场测量标称功率在15kW以上、标称转速在120转/分和15000转/
| Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
|
BS 7854-6-1996
| 机械振动.对非旋转零件测量的机械振动评估.额定功率大于100KW的往复式机械
| Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Reciprocating machines with power ratings above 100 kW
|
BS 7856-1996
| 交流电设计实用规程,有功功率(1级和2级)瓦时表
| Code of practice for design of alternating current, watthour meters for active energy (classes 1 and 2)
|
BS 848-2.4-2004
| 工业用风扇.标准化实验室条件下的风扇声功率级的测定.声强法
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Sound intensity method
|
BS 89-3-1990
| 直接指示模拟电工测量仪表及其辅助设备.第3部分:瓦特表和无功功率表的特殊要求规范
| Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for wattmeters and varmeters
|
BS 89-5-1990
| 直接指示模拟电工测量仪表及其辅助设备.第5部分:相位表、功率因数表和同步指示器的特殊要求规范
| Direct acting indicating analogue electrical measuring instruments and their accessories - Specification for special requirements for phase meters, power factor meters and synchroscopes
|
BS 9133 N001 to 003-1975
| 单旋非线绕小功率旋转电位器详细规范.与电阻元件绝缘的主轴、主轴和密封仪表板或容器、主轴和密封仪表板.全
| Detail specification for single turn low power non-wirewound rotary potentiometers - Spindle insulated from resistance element, spindle and panel sealed or container, spindle and panel sealed - Full assessment level
|
BS 9133-1973
| 经质量评定的单匝小功率旋转式电位器详细规范编制规则
| Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality
|
BS 9300 C379-388-1971
| 安装于硅螺杆上的大功率整流器二极管详细规范
| Detail specifications for silicon stud mounted, power rectifier diodes
|
BS 9364 N007 and N009-1978
| 小功率硅N-P-N型开关晶体管详细规范.20V、平面外延、额定环境条件、密封封装.全面附加评定级
| Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
|
BS 9364 N008 and N010-1978
| 小功率硅N-P-N型开关晶体管详细规范.20V、平面外延、额定环境条件、密封封装(长引线型).全面附加评定级
| Detail specification for low power silicon n-p-n switching transistors - 20 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
|
BS 9364 N011-1978
| 小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装、全面附加评定级
| Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
|
BS 9364 N012-1978
| 小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装(长引线型).全面和附加评估级
| Detail specification for low power silicon p-n-p switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
|
BS 9364 N013-1979
| 小功率硅P-N-P型开关晶体管详细规范.25V、平面外延、额定环境条件、密封封装、全面附加评定级
| Detail specification for low power silicon p-n-p switching transistors - 25 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
|
BS 9364 N016-1979
| 小功率硅P-N-P型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装.全面附加评定级
| Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation - Full plus additional assessment level
|
BS 9364 N017-1979
| 小功率硅n-p-n型开关晶体管详细规范.65V、平面外延、额定环境条件、密封封装(长引线型).全面附加评定级
| Detail specification for low power silicon n-p-n switching transistors - 65 V, planar epitaxial, ambient rated, hermetic encapsulation (long lead version) - Full plus additional assessment level
|
BS 9925-03.0-1988
| 电子元器件用经质量评估的协调体系.通信用电感器和变压器磁心.第3部分:分规范:功率用变压器和扼流圈的磁氧
| Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Sectional specification: Magnetic oxide cores for transformers and chokes for power applications
|
BS 9925-03.01-1988
| 电子元器件用质量评估协调体系.通信用电感器和变压器磁心.第3部分:空白详细规范:功率用变压器和扼流圈磁氧
| Harmonized system of quality assessment for electronic components - Inductor and transformer cores for telecommunications - Blank detail specification: magnetic oxide cores for transformers and chokes for power applications - Assessment level A
|
BS 9940-01.0-1983
| 电子元器件用质量评估协调体系.电子设备用固定电阻器. 第1部分:分规范:低功率非线绕固定电阻器
| Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed low power non-wirewound resistors
|
BS 9940-01.01-1983
| 电子元器件用质量评估协调体系.电子设备用固定电阻器.第1部分:空白详细规范:低功率非线绕固定电阻器.第1节:
| Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed low power non-wirewound resistors - Assessment level E
|
BS AU 215-3-1988
| 动力输出装置.第3部分:商用道路车辆安装在尾部的功率输出装置的连接件尺寸规范
| Power take offs (PTOs) - Specification for dimensions of connections for rear mounted power take offs for commercial road vehicles
|
BS CECC 25300-1981
| 电子元器件用质量评估协调体系.分规范.功率用磁性氧化物磁心
| Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for power applications
|
BS CECC 40101 019-1977
| 固定小功率非绕线绝缘电阻器详细规范.螺旋形切割金属氧化物薄膜.全面评定级
| Detail specification for fixed low power non-wirewound insulated resistors - Metal oxide film, helically cut - Full assessment level
|
BS CECC 41200-1979
| 电子元器件用质量评估协调体系.分规范.功率电位器
| Harmonized system of quality assurance for electronic components: sectional specification: power potentiometers
|
BS CECC 41201-1978
| 电子元器件用质量评估协调体系规范.空白详细规范:功率电位器(S级评估)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: power potentiometers (assessment level S)
|
BS CECC 41202-1978
| 电子元器件用质量评估协调体系规范.空白详细规范:功率电位器(M级评估)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: power potentiometers (assessment level M)
|
BS CECC 41300-1979
| 电子元器件用质量评估协调体系.分规范.小功率单圈旋转电位器
| Harmonized system of quality assessment for electronic components - Sectional specification: low power single-turn rotary potentiometers
|
BS CECC 41301-1979
| 电子元器件用质量评估协调体系规范.空白详细规范:小功率单圈旋转电位器(S级评估)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: low power single turn rotary potentiometers (assessment level S)
|
BS CECC 41302-1979
| 电子元器件用质量评估协调体系规范.空白详细规范:小功率单圈旋转电位器(M级评估)
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: low power single turn rotary potentiometers (assessment level M)
|
BS CECC 45004-1977
| 电子元器件用质量评估协调体系规范.空白详细规范:盘形密封功率管
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: disc seal power tubes
|
BS CECC 90103-1990
| 电子元件质量评定的协调系统规范.类规范.54LS、64LS、74LS、84LS 系列的 数字式集成TTL小功率SCHOTTKY电路
| Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL low power SCHOTTKY, circuits, series 54LS, 64LS, 74LS, 84LS
|
BS DD ENV 12102-1997
| 带电驱动压缩机的空调、加热泵和除湿器.空气噪声的测量.声功率水平的测定
| Air conditioners, heat pumps and dehumidifiers with electrically driven compressors - Measurement of airborne noise - Determination of the sound power level
|
BS DD IEC/TS 61400-14-2006
| 风轮机.表面声功率级和音调值声明
| Wind turbines - Declaration of apparent sound power level and tonality values
|
BS E9065-1976
| 电子元器件用质量评估协调体系规范.空白详细规范.阳极消耗可达1kW的小功率发射管
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: small power transmitting tubes of anode dissipation up to 1 kW
|
BS EN 1020-1998
| 借助风扇传输燃气和/或燃烧产物的空间加热净加热输入功率不超过300KW的非家用燃气强制对流空气加热器
| Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products
|
BS EN 12736-2002
| 电力驱动的道路车辆.用运载工具车上带的充电器充电过程中车辆在空中发出的噪声.声功率水平的测定
| Electrically propelled road vehicles - Airborne acoustical noise of vehicle during charging with on-board chargers - Determination of sound power level
|
BS EN 135001-1978
| 电子元器件质量保证协调体系.空白详细规范.功率小于500瓦的C、W功率行波管放大器
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: CW power amplifier travelling wave tubes up to 500 watts
|
BS EN 140101-1997
| 电子元器件质量评定协调体系.低功率非线绕固定电阻器空白详细规范(评定等级 S)
| Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wire wound resistors (assessment level S)
|
BS EN 140102-1996
| 电子元器件质量评定协调体系.空白详细规范:固定低功率非线绕电阻器(评定等级M)
| Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wirewound resistors (assessment level M)
|
BS EN 140103-1996
| 电子元器件质量评定协调体系.空白详细规范:固定低功率非线绕电阻器(评定等级P)
| Harmonized system of quality assessment for electronic components - Blank detail specification - Fixed low power non-wirewound resistors (Assessment level P)
|
BS EN 140104-1996
| 电子元器件质量评定协调体系.空白详细规范:固定低功率非线绕电阻器(评定等级SB和SC)
| Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power non-wirewound resistors (Assessment levels SB and SC)
|
BS EN 140211-1995
| 电气元器件质量评定协调体系规范.空白详细规范.固定功率电阻.能力鉴定
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed power resistors - Capability approval
|
BS EN 140400-2004
| 电子元器件质量评定协调系统.分规范.低功率表面安装的固定电阻器
| Harmonized system of quality assessment for electronic components - Sectional specification - Fixed low power surface mount (SMD) resistors
|
BS EN 140401-2002
| 空白详细规格:低功率非线绕表面安装的固定电阻器
| Blank detail specification - Fixed low power non wire-wound surface mount (SMD) resistors
|
BS EN 140401-801-2002
| 详细规范.低功率非线绕表面安装电阻器.矩形. 0.1、0.25、0.5和1级别的稳定性
| Detail specification - Fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1; 0,25; 0,5 ; 1
|
BS EN 140401-802-2002
| 详细规范.低功率非线绕表面安装的固定电阻器.矩形.1和2级别的稳定性
| Detail Specification: Fixed low power non wire-wound surface mount(SMD) resistors - Rectangular - Stability classes 1; 2
|
BS EN 140401-803-2002
| 详细规范.低功率非线绕表面安装的固定电阻器.矩形.0.05、0.1、0.25、0.5、1和2级别的稳定性
| Detail specification - Fixed low power non wire-wound surface mount (SMD) resistors - Cylindrical - Stability classes 0,05; 0,1; 0 ,25; 0,5; 1; 2
|
BS EN 140402-1998
| 电子元器件质量评定协调系统.空白详细规范:低功率线绕表面安装(SMD) 固定电阻器
| Harmonized system of quality assessment for electronic components - Blank detail specification: fixed low power wire wound surface mounting (SMD) resistors
|
BS EN 140402-801-2005
| 详细规范:固定低功率线绕表面安装(SMD)电阻器.矩形.稳定性等级0.5、1、2
| Detail specification: Fixed low power wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
|
BS EN 190103-1990
| 电子元器件质量评定协调体系规范.系列规范:数字集成TTL小功率肖特基电路系列54LS、64LS、74LS、84LS
| Specification for harmonized system of quality assessment for electronic components - Family specification: digital integrated TTL low power SCHOTTKY, circuits, series 54LS, 64LS, 74LS, 84LS
|
BS EN 190106-1987
| 电子元器件质量评定协调体系规范.系列规范:TTL改进的小功率肖特基数字集成电路系列54ALS、74ALS
| Specification for harmonized system of quality assessment for electronic components - Family specification - TTL advanced low power SCHOTTKY digital integrated circuits series 54 ALS, 74 ALS
|
BS EN 2591-603-2002
| 电气和光学连接元件.试验方法.光学元件.功率分配的变化
| Elements of electrical and optical connection - Test methods - Optical elements - Change of power distribution
|
BS EN 29775-1993
| 小船.15KW-40KW功率单外舷电动机远程操纵系统
| Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power
|
BS EN 45510-2-4-2000
| 发电站设备采购指南.电气设备.高功率静态转换器.第4部分:高功率静态转换器
| Guide for the procurement of power station equipment - Electrical equipment - High power static convertors - Section 4: High power static convertors
|
BS EN 50294-2002
| 镇流管电路的全部输入功率的测量方法
| Measurement method of total input power of ballast-lamp circuits
|
BS EN 50324-2-2002
| 陶瓷材料和元件的压电性能.测量方法.低功率
| Piezoelectric properties of ceramic materials and components - Methods of measurement - Low power
|
BS EN 50324-3-2002
| 陶瓷材料和元件的压电性能.测量方法.高功率
| Piezoelectric properties of ceramic materials and components - Methods of measurement - High power
|
BS EN 50328-2003
| 铁路设施.固定式装置.变电站用电子功率变换器
| Railway applications - Fixed installations - Electronic power convertors for substations
|
BS EN 50371-2002
| 证明与暴露在电磁场(10 MHz - 300 GHz)中人体有关的有基本限制的低功率电子和电气设备合格的通用标准.一般
| Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public
|
BS EN 55016-1-3-2005
| 无线电干扰和抗扰测量仪器和方法规范.无线电干扰和抗扰测量仪器.辅助设备.干扰功率
| Specification for radio disturbance and immunity measuring apparatus and methods - Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
|
BS EN 55016-2-2-2005
| 无线电干扰和抗扰测量仪器和方法规范.干扰和抗扰测量方法.干扰功率测量
| Specification for radio disturbance and immunity measuring apparatus and methods - Methods of measurement of disturbances and immunity - Measurement of disturbance power
|
BS EN 60204-11-2001
| 机械的安全性.机器的电气设备.电压大于1000V交流电或1500V直流电和功率不超过36KV的高压设备的要求
| Safety of machinery - Electrical equipment of machines - Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
|
BS EN 60268-16-2003
| 音响系统设备.用语音传输系数测定语音清晰度的目标额定功率
| Sound system equipment - Objective rating of speech intelligibility by speech transmission index
|
BS EN 60654-2-1980
| 工业过程测量和控制设备工作条件.功率
| Operating conditions for industrial-process measurement and control equipment - Power
|
BS EN 60835-3-6-1997
| 数字微波无线电发射系统使用设备测量方法.卫星地面站测量.大功率放大器
| Methods of measurement for equipment used in digital microwave radio transmission systems - Measurements on satellite earth stations - High-power amplifiers
|
BS EN 61000-4-30-2003
| 电磁兼容性(EMC).试验和测量技术.功率等级测量方法
| Electromagnetic compatibility (EMC) - Testing and measurement techniques - Power quality measurement methods
|
BS EN 61040-1993
| 激光辐射功率和能量探测器、仪表和设备规范
| Specification for power and energy measuring detectors, instruments and equipment for laser radiation
|
BS EN 61161-1995
| 液体频率范围为0.5MHz-25MHz的超声波功率测量规范
| Specification for ultrasonic power measurement in liquids in the frequency range 0.5 MHz to 25 MHz
|
BS EN 61173-1995
| 光电功率发生系统过压保护导则
| Overvoltage protection for photovoltaic (PV) power generating systems - Guide
|
BS EN 61277-1998
| 地面光电功率发生装置.总则和指南
| Terrestial photovoltaic (PV) power generating systems - General and guide
|
BS EN 61280-1-1-1998
| 光纤放大器.基本光谱分析仪.单模光纤电缆用发射机光输出功率测量
| Optical fibre amplifiers.Basic spectrum analyzers - Transmitter output optical power measurement for single-mode optical fibre cable
|
BS EN 61290-1-3-2005
| 光学放大器.试验方法.功率和增益参数.光功率计法
| Optical amplifiers — Test methods — Part 1-3: Power and gain parameters — Optical power meter method |
BS EN 61300-3-31-2003
| 光纤互连器件和无源元件.基本试验和测量程序.检验和测量.光纤光源的耦合功率比测量
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Coupled power ratio measurement for fibre optic sources
|
BS EN 61307-2006
| 工业微波加热装置.输出功率测定的试验方法
| Industrial microwave heating installations - Test methods for the determination of power output
|
BS EN 61315-2006
| 光纤功率计校正
| Calibration of fibre-optic power meters
|
BS EN 61523-1-2002
| 延迟计算和功率计算标准.集成电路延迟计算和功率计算系统
| Delay and power calculation standards - Integrated circuit delay and power calculation systems
|
BS EN 61523-2-2002
| 延迟计算和功率计算标准.CMOS集成电路子程序库.预布局延迟计算规范
| Delay and power calculation standards - Pre-layout delay calculation specification for CMOS ASIC libraries
|
BS EN 61580-8-1997
| 波导管测量方法.波导管功率保持性
| Methods of measurement for waveguides - Waveguide power holding capability
|
BS EN 61683-2000
| 光电系统.电功率调节器.效能测量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
|
BS EN 61803-1999
| 高压直接电流(HVDC)转换站功率损失的测定
| Determination of power losses in high-voltage direct current (HVDC) converter stations
|
BS EN 61922-2003
| 高频感应加热装置.测定发生器功率输出的试验方法
| High-frequency induction heating installations - Test methods for the determination of power output of the generator
|
BS EN 62018-2004
| 信息技术设备的功率消耗.测量方法
| Power consumption of information technology equipment - Measurement methods
|
BS EN 621-1998
| 不用风扇传输燃气和/或燃烧产物的空间加热净加热输入功率不超过300KW的非家用燃气强制对流空气加热器
| Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
|
BS EN 778-1998
| 不用风扇传输燃气和/或燃烧产物的空间净加热输入功率不超过70kW的家用燃气强制对流空气加热器
| Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products
|
BS EN ISO 11203-1996
| 声学.机械装置及设备发出的噪声.在工作地点和其它试验场所从声功率级测量声压级
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
|
BS EN ISO 11592-2001
| 小于8米长艇身的小艇.最大推动功率的测定
| Small craft less than 8 m length of hull - Determination of maximum propulsion power rating
|
BS EN ISO 3741-2000
| 声学.用声压测定噪声源声音功率级.混响室内的精密方法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms
|
BS EN ISO 3743-1-1994
| 声学.噪声源声功率级的测定.在混响声场中小声源和移动声源的工程测量方法.第1部分:硬墙试验室的比较分析法
| Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Comparison for hard-walled test rooms
|
BS EN ISO 3743-2-1995
| 声学.噪声源的声功率级测定.在混响场中对可移动声源的工程测量方法.用专用混响试验室的测量方法
| Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Methods for special reverberation test rooms
|
BS EN ISO 3744-1994
| 声学.用声压力测定噪声源的声功率级.在声音反射平面上基本自由场中的测量方法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane
|
BS EN ISO 3745-2003
| 声学.用声压法测定噪声源声功率级.消声室和半消声室精密法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms
|
BS EN ISO 3746-1996
| 声学.用噪声压力测定噪声功率级.在反射平面上利用包封测量表面的测量法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
|
BS EN ISO 3747-2000
| 声学.声压法测定噪声源的声功率级.现场比较法
| Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ
|
BS EN ISO 5135-1999
| 声学.通过混响室测定空调终端设备、空调终端装置、阻尼器和阀门噪音的声音功率级
| Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room
|
BS EN ISO 5136-2003
| 声学.风机和其他鼓风装置吹到管道中的声功率的测定.管道法
| Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method
|
BS EN ISO 6185-1-2001
| 充气艇.电机最大额定功率为4.5KW的小艇
| Inflatable boats - Boats with a maximum motor power rating of 4,5 kW
|
BS EN ISO 6185-2-2001
| 充气艇.电动机最大额定功率为4.5KW至15KW的小艇
| Inflatable boats - Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive
|
BS EN ISO 6185-3-2001
| 充气艇.最大电动机功率为15KW及其以上的小气艇
| Inflatable boats - Boats with maximum motor power rating of 15 kW and greater
|
BS EN ISO 6926-2000
| 声学.声功率级测定用基准声源的性能和校正要求
| Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels
|
BS EN ISO 9614-1-1993
| 声学.利用声音强度测定噪声源功率级.第1部分:离散点测量
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement at discrete points
|
BS EN ISO 9614-2-1997
| 声学.利用声强度对噪声源声功率级别的测定.使用扫描测量法
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Measurement by scanning
|
BS EN ISO 9614-3-2002
| 声学.利用声强度对噪声源声功率级别进行的测定.使用扫描精确测量法
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Precision method for measurement by scanning
|
BS G 248-1993
| 混合式遥控功率控制器规范.一般要求
| Specification for hybrid remote power controllers - General requirements
|
BS G 249-1993
| 固态遥控功率控制器规范.一般要求
| Specification for solid-state remote power controllers - General requirements
|
BS IEC 60747-8-2001
| 分立半导体器件和集成电路.场效应晶体管.电源转换场效应晶体管测量方法中附加功率、特性和amds
| Discrete semiconductor devices and integrated circuits - Field-effect transistors - Additional ratings and characteristics and amds in the measuring methods for power switching field effect transistors
|
BS IEC 61523-3-2004
| 延迟和功率计算标准.电子设计过程用标准延迟格式(SDF)
| Delay and power calculation standards - Standard delay formaty (SDF) for the electronic design process
|
BS ISO 13347-1-2004
| 工业风扇.标准实验室条件下风扇声功率级的测定.总论
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - General overview
|
BS ISO 13347-2-2004
| 工业风扇.标准实验室条件下风扇声功率级的测定.混响室法
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Reverberant room method
|
BS ISO 13347-3-2004
| 工业风扇.标准实验室条件下风扇声功率级的测定.包络面法
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Enveloping surface method
|
BS ISO 13347-4-2004
| 工业用风扇.标准化实验室条件下风扇声功率级的测定.声强法
| Industrial fans - Determination of fan sound power levels under standardized laboratory conditions - Sound intensity method
|
BS ISO 14396-2002
| 往复式内燃机.内燃机功率的测定和内燃机功率测量的试验方法.符合ISO 8178的废气排放试验的补充要求
| Reciprocating internal combustion engines - Determination and method for the measurement of engine power - Additional requirements for exhaust emission tests in accordance with ISO 8178
|
BS ISO 15550-2002
| 内燃机.测量发动机功率的测定方法.总要求
| Internal combustion engines - Determination and method for the measurement of engine power - General requirements
|
BS ISO 16902-1-2003
| 液压传动.用声强法测定声功率级的试验规程.工程法.泵
| Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques - Engineering method - Pumps
|
BS ISO 2534-1998
| 道路车辆.发动机试车法规.总功率
| Road vehicles - Engine test code - Gross power
|
BS ISO 3046-1-2002
| 往复式内燃机.性能.功率、燃料消耗量和润滑油消耗量和试验方法说明.通用内燃机的附加要求
| Reciprocating internal combustion engines - Performance - Declarations of power, fuel and lubricating oil consumptions, and test methods - Additional requirements for engines for general use
|
BS ISO 6926-2000
| 声学.声功率级测定用基准声源的性能和校正要求
| Acoustics - Requirements for the performance and calibration of reference sound sources for the determination of sound power levels
|
BS ISO 7919-2-2002
| 非往复式机器的机械振动.旋转轴的测量和评定标准.陆地安装,功率超过50MW,正常运转速度为1500r/min、1800r/m
| Mechanical vibration of non-reciprocating machines - Measurements on rotating shafts and evaluation criteria - Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
|
BS ISO 8528-1-2006
| 往复式内燃机驱动的交流发电机组.应用、额定功率和性能
| Reciprocating internal combustion engine driven alternating current generating sets - Application, ratings and performance
|
BS QC 400102-1992
| 电子元器件质量评估协调体系规范.电子设备用固定电阻器.空白详细规范.低功率非线绕固定电阻器.评估等级F
| Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification - Fixed low-power non-wirewound resistors - Assessment level F
|
BS QC 400200-1983
| 电子元器件质量评估的协调体系.电气设备用固定电阻.分规范:固定式功率电阻器
| Harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Sectional specification: fixed power resistors
|
BS QC 400201-1984
| 电子元件质量评估协调系统.电气设备用固定电阻器.空白细则规范:固定式功率电阻器.评估等级E
| Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification: fixed power resistors - Assessment level E
|
BS QC 400202-1992
| 电子元器件质量评估协调体系规范.电子设备用固定电阻器.空白详细规范.固定式功率电阻器.评估等级F
| Specification for harmonized system of quality assessment for electronic components - Fixed resistors for use in electronic equipment - Blank detail specification - Fixed power resistors - Assessment level F
|
BS QC 400203-1993
| 电子设备用固定电阻器规范.空白详细规范.固定功率电阻器、散热片型.评估等级H
| Specification for fixed resistors for use in electronic equipment - Blank detail specification - Fixed power resistors, heat-sink types - Assessment level H
|
BS QC 410200-1992
| 电子元器件质量评估协调体系.电子设备用电位器.单匝旋转功率电位器分规范
| Harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Sectional specification for single-turn rotary power potentiometers
|
BS QC 410203-1992
| 电子元器件质量评估协调体系规.电子设备用电位器.空白详细规范:单匝旋转功率电位计.评估等级E
| Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary power potentiometers - Assessment level E
|
BS QC 410204-1992
| 电子元器件质量评估协调体系规.电子设备用电位器.空白详细规范:单匝旋转功率电位计.评估等级F
| Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary power potentiometers - Assessment level F
|
BS QC 410300-1992
| 电子元器件质量评估协调体系.电子设备用电位器.单匝旋转低功率线绕和非线绕电位器分规范
| Harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Sectional specification for single-turn rotary low-power wirewound and non-wirewound potentiometers
|
BS QC 410301-1992
| 电子元器件质量评估协调体系规.电子设备用电位计.空白详细规范:单匝旋转功率电位计.评估等级E
| Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary low-power potentiometers - Assessment level E
|
BS QC 410302-1992
| 电子元器件质量评估协调体系规.电子设备用电位计.空白详细规范:单匝旋转低功率电位计.评估等级F
| Specification for harmonized system of quality assessment for electronic components - Potentiometers for use in electronic equipment - Blank detail specification: single-turn rotary low-power potentiometers - Assessment level F
|
BS QC 750106-1993
| 电子元器件质量评估协调体系规范.半导体分立器件.空白详细规范.用于外壳额定功率放大器应用的场效应晶体管
| Specification for harmonized system of quality assessment for electronic components - Semiconductor discrete devices - Blank detail specification - Field-effect transistors for case-rated power amplifier applications
|
BS QC 750112-1988
| 电子元器件质量评估协调体系.空白详细规范.半导体器件.分立器件.场效应晶体管.功率达5W和1GHz的单栅场效应
| Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Semiconductor devices - Discrete devices - Field-effect transistors - Blank detail specification for single-gate field-effect transistors, up to 5 W and 1 GHz
|
编号 | 中文名称 | 英文名称 |