编号 | 中文名称 | 英文名称 |
IEC 60051-3 AMD 1-1994
| 直接作用模拟指示电测量仪表及其附件 第3部分:功率表和无功功率表的特殊要求 修改1
| Direct acting indicating analogue electrical-measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters; Amendment 1
|
IEC 60051-3-1984
| 直接作用模拟指示电测量仪表及其附件 第3部分:功率表和无功功率表的特殊要求
| Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3 : Special requirements for wattmeters and varmeters
|
IEC 60051-5-1985
| 直接作用模拟指示电测量仪表及其附件 第5部分:相位表、功率因数表和同步指示器的特殊要求
| Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5: Special requirements for phase meters, power factor meters and synchroscopes.
|
IEC 60072-1-1991
| 旋转电机的尺寸及功率等级 第1部分:机座号:56~400、凸缘号:55~1080
| Dimensions and output series for rotating electrical machines; part 1: frame numbers 56 to 400 and flange numbers 55 to 1080
|
IEC 60072-2-1990
| 旋转电机的尺寸及功率等级 第2部分:机座号:355~1000、凸缘号:1180~2360
| Dimensions and output series for rotating electrical machines; part 2: frame numbers 355 to 1000 and flange numbers 1180 to 2360
|
IEC 60072-3-1994
| 旋转电机的尺寸及功率等级 第3部分:内装式小功率电机、凸缘号:BF10~BF50
| Dimensions and output series for rotating electrical machines; part 3: small built-in motors; flange numbers BF10 to BF50
|
IEC 60115-2-1-1982
| 电子设备用固定电阻器 第2-1部分:空白详细规范:低功率非线绕固定电阻器 评定水平E
| Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 2 : Sectional specification: Fixed low-power non-wirewound resistors. Blank detail specification: Fixed low-power non-wirewound resistors. Assessment level E
|
IEC 60115-2-1982
| 电子设备用固定电阻器 第2部分:分规范:低功率非线绕固定电阻器
| Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 2 : Sectional specification: Fixed low-power non-wirewound resistors
|
IEC 60115-2-2-1992
| 电子设备用固定电阻器 第2-2部分:空白详细规范:低功率非线绕固定电阻器 评定水平F
| Fixed resistors for use in electronic equipment; part 2: blank detail specification: fixed low-power non-wirewound resistors; assessment level F
|
IEC 60115-4 AMD 1-1993
| 电子设备用固定电阻器 第4部分:分规范:功率型固定电阻器 评定水平E 修改1
| Fixed resistors for use in electronic equipment; part 4: sectional specification: fixed power resistors; amendment 1
|
IEC 60115-4-1 AMD 1-1993
| 电子设备用固定电阻器 第4-1部分:详细规范:功率型固定电阻器 评定水平E 修改1
| Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors; assessment level E; amendment 1
|
IEC 60115-4-1-1983
| 电子设备用固定电阻器 第4-1部分:空白详细规范:功率型固定电阻器 评定水平E
| Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 4 : Sectional specification: Fixed power resistors. Blank detail specification: Fixed power resistors. Assessment level E
|
IEC 60115-4-101-1995
| 电子设备用固定电阻器 第4-101部分:详细规范:轴向引线的线绕功率型固定电阻器 稳定度等级5% 评定水平E
| Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 5% - Assessment level E
|
IEC 60115-4-102-1995
| 电子设备用固定电阻器 第4-102部分:详细规范:轴向引线的线绕功率型固定电阻器 稳定度等级1% 评定水平E
| Fixed resistors for use in electronic equipment - Part 4: Detail specification: Fixed power wirewound resistors with solderable axial wire leads - Stability class 1% - Assessment level E
|
IEC 60115-4-1982
| 电子设备用固定电阻器 第4部分:分规范:功率型固定电阻器
| Sectional specification : Fixed resistor networks in which not all resistors are individually measurable. Part 4 : Sectional specification: Fixed power resistors
|
IEC 60115-4-2-1992
| 电子设备用固定电阻器 第4-2部分:空白详细规范:功率型固定电阻器 评定水平F
| Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors; assessment level F
|
IEC 60115-4-3-1993
| 电子设备用固定电阻器 第4-3部分:空白详细规范:带散热的功率型固定电阻器 评定水平H
| Fixed resistors for use in electronic equipment; part 4: blank detail specification: fixed power resistors, heat-sink types; assessment level H
|
IEC 60151-10-1966
| 电子管电性能的测量 第10部分:音频输出功率和失真的测量方法
| Measurements of the electrical properties of electronic tubes. Part 10 : Methods of measurement of audio-frequency output power and distortion
|
IEC 60151-11-1966
| 电子管电性能的测量 第11部分:射频输出功率的测量方法
| Measurements of the electrical properties of electronic tubes. Part 11 : Methods of measurement of radiofrequency output power
|
IEC 60235-5-1972
| 微波管电性能的测量 第5部分:小功率振荡速调管
| Measurement of the electrical properties of microwave tubes. Part 5 : Low-power oscillator klystrons
|
IEC 60235-6-1972
| 微波管电性能的测量 第6部分:大功率速调管
| Measurement of the electrical properties of microwave tubes. Part 6 : High-power klystrons
|
IEC 60244-2 AMD 1-1974
| 无线电发射机的测量方法 第2部分:带宽、带外功率和非本振功率 修改1
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations
|
IEC 60244-2-1969
| 无线电发射机的测量方法 第2部分:带宽、带外功率和非本振功率
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations
|
IEC 60244-2A AMD 1-1973
| 无线电发射机的测量方法 第2部分:带宽、带外功率和非本振功率 补充1:附录 修改1
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices
|
IEC 60244-2A-1969
| 无线电发射机的测量方法 第2部分:带宽、带外功率和非本振功率 补充1:附录
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. First supplement: Appendices
|
IEC 60244-2B-1969
| 无线电发射机的测量方法 第2部分:带宽、带外功率和非主振功率 补充2:用于电话及声音广播发射机的带宽及带外
| Methods of measurement for radio transmitters. Part 2 : Bandwidth, out-of-band power and power of non-essential oscillations. Second supplement: Modulating signals for the measurement of bandwidth and out-of-band power of transmitters for telephony and sound broadcasting
|
IEC 60255-12-1980
| 电气继电器 第12部分:两个输入激励量的方向继电器和功率继电器
| Electrical relays. Part 12 : Directional relays and power relays with two input energizing quantities
|
IEC 60268-16-2003
| 声系统设备.第16部分:用语音传输系数测定语音清晰度的目标额定功率
| Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index
|
IEC 60393-4-1-1992
| 电子设备用电位器 第4-1部分:空白详细规范:单圈旋转功率电位器 评定水平E
| Potentiometers for use in electronic equipment; part 4: blank detail specification: singel-turn rotary power potentiometers; assessment level E
|
IEC 60393-4-1992
| 电子设备用电位器 第4部分:分规范:单圈旋转功率电位器
| Potentiometers for use in electronic equipment; part 4: sectional specification: single-turn rotary power potentiometers
|
IEC 60393-4-2-1992
| 电子设备用电位器 第4-2部分:空白详细规范:单圈旋转功率电位器 评定水平F
| Potentiometers for use in electronic equipment; part 4: blank detail specification: singel-turn rotary power potentiometers; assessment level F
|
IEC 60393-5-1-1992
| 电子设备用电位器 第5-1部分:空白详细规范:单圈旋转低功率电位器 评定水平E
| Potentiometers for use in electronic equipment; part 5: blank detail specification: singel-turn rotary low-power potentiometers; assessment level E
|
IEC 60393-5-1992
| 电子设备用电位器 第5部分:分规范:单圈旋转线绕和非线绕低功率电位器
| Potentiometers for use in electronic equipment; part 5: sectional specification: single-turn rotary low-power wirewound and non-wirewound potentiometers
|
IEC 60393-5-2-1992
| 电子设备用电位器 第5-2部分:空白详细规范:单圈旋转低功率电位器 评定水平F
| Potentiometers for use in electronic equipment; part 5: blank detail specification: singel-turn rotary low-power potentiometers; assessment level F
|
IEC 60510-2-7-1989
| 卫星地面站用无线电设备的测量方法 第2部分:分系统测量 第7节:大功率放大器
| Methods of measurement for radio equipment used in satellite earth stations; part 2: measurements for sub-systems; section seven, high-power amplifier
|
IEC 60681-1-1980
| 专用小功率电动机的尺寸 第1部分:燃油器电动机
| Dimensions of small power motors for definite purpose application. Part 1 : Oil burner motors
|
IEC 60747-8-2-1993
| 半导体器件 分立器件 第8部分:场效应晶体管 第2节:外壳额定功率放大场效应晶体管空白详细规范
| Semicoductor devices; discrete devices; part 8: field-effect transistors; section 2: blank detail specification for field-effect transistors for case-rated power amplifier applications
|
IEC 60835-3-6-1996
| 数字微波无线电传输系统使用设备的测量方法 第3部分:卫星地面站的测量 第6节:大功率放大器
| Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High-power amplifiers
|
IEC 61000-2-13-2005
| 电磁兼容性(EMC) 第2-13部分:环境.辐射和传导的大功率电磁(HEMP)环境
| Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments, radiated and conducted
|
IEC 61000-4-13-2002
| 电磁兼容性.第4-13部分:试验和测量技术.包括交流电功率点主要信号的低频抗扰试验谐波和中间谐波
| Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests
|
IEC 61000-4-17 Edition 1.1-2002
| 电磁兼容性(EMC).第4-17部分:试验和测量技术.直流电流输入功率点通道.干扰试验
| Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test
|
IEC 61000-4-30-2003
| 电磁兼容性(EMC).第4-32部分:试验和测量技术.功率质量测量方法
| Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods
|
IEC 61040-1990
| 激光辐射用功率和能量测量探测器、仪器和设备
| Power and energy measuring detectors, instruments and equipment for laser radiation
|
IEC 61123-1991
| 可靠性试验 成功率验证试验方案
| Reliability testing; compliance test plans for success ratio
|
IEC 61161-1998
| 0.5MHz~25MHz频率范围内液体中超声波功率测量
| Ultrasonic power measurement in liquids in the frequency range 0,5 MHz to 25 MHz
|
IEC 61280-1-1-1998
| 纤维光学通信子系统基本试验程序 第1-1部分:一般通信子系统试验程序 单模光缆发射器光输出功率测量
| Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable
|
IEC 61290-1-2-2005
| 光学放大器.试验方法.第1-2部分:光功率参数和增益参数.电频谱分析仪法
| Optical amplifiers - Test methods - Part 1-2: Power and gain parameters - Electrical spectrum analyzer method
|
IEC 61290-1-3-2005
| 光学放大器.试验方法.第1-3部分:光功率参数和增益参数.光功率计法
| Optical amplifiers - Test methods - Part 1-3: Power and gain parameters - Optical power meter method
|
IEC 61290-7-1-1998
| 光学纤维放大器 基础规范 第7-1部分:频带外插入损耗的测量方法 滤波光功率计
| Optical fibre amplifiers - Basic specification - Part 7-1: Test methods for out-of-band insertion losses - Filtered optical power meter
|
IEC 61300-2-14-2005
| 纤维光学互连器件和无源元件.基本试验和测量程序.第2-14部分:试验.光学功率控制和损坏阈特性
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization
|
IEC 61300-3-31-2003
| 光纤互连装置和无源部件.基本试验和测量程序.第3-34部分:检验和测量.纤维光学源的耦合功率比测量
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources
|
IEC 61307-2006
| 工业微波加热设备 测定输出功率的试验方法
| Industrial microwave heating installations - Test methods for the determination of power output
|
IEC 61308-2005
| 高频电介质加热设备.测定输出功率的试验方法
| High-frequency dielectric heating installations - Test methods for the determination of power output
|
IEC 61315-2005
| 纤维光学功率计校准
| Calibration of fibre optic power meters
|
IEC 61400-21-2001
| 风轮发电机系统 第21部分:管道连接风轮机功率质量特性的测量和评定
| Wind turbine generator systems - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines
|
IEC 61523-2-2002
| 延迟计算和功率计算标准.第2部分:互补金属氧化物半导体(CMOS)专用集成电路(ASIC)程序库用配套延迟计算规范
| Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries
|
IEC 61580-8-1996
| 波导测量方法 第8部分:波导功率容量
| Methods of measurement for waveguides - Part 8: Waveguide power holding capability
|
IEC 61683-1999
| 光伏系统 功率调节器 效率测量程序
| Photovoltaic systems - Power conditioners - Procedure for measuring efficiency
|
IEC 61803 Corrigendum 1-1999
| 高压直流(HVDC)变流站功率损失的测定
| Determination of power losses in high-voltage direct current (HVDC) converter stations
|
IEC 61803-1999
| 高压直流(HVDC)变流站功率损失的测定
| Determination of power losses in high-voltage direct current (HVDC) converter stations
|
IEC 61922-2002
| 高频感应加热装置.测定发生器功率输出的试验方法
| High-frequency induction heating installations - Test methods for the determination of power output of the generator
|
IEC 61954 Corrigendum 1-1999
| 输电和配电系统用电力电子设备.静态无功功率补偿器用晶闸管阀的试验
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
|
IEC 61954-1999
| 输电和配电系统用电力电子设备 静态无功功率补偿器用晶闸管阀的试验
| Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators
|
IEC 62018-2003
| 信息技术设备的功率消耗.测量方法
| Power consumption of information technology equipment - Measurement methods
|
IEC 62087-2002
| 声频、视频和相关设备功率消耗量的测量方法
| Methods of measurement for the power consumption of audio, video and related equipment
|
IEC 62132-4-2006
| 集成电路.150kHz-1GHz电磁抗扰度的测量.第4部分:直接射频功率注入法
| Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method
|
IEC/TR 62271-308-2002
| 高压开关设备和控制设备.第308部分:不对称短路试验功率T100a指南
| High-voltage switchgear and controlgear - Part 308: Guide for asymmetrical short-circuit breaking test duty T100a
|
IEC/TS 61400-14-2005
| 风轮机.第14部分:表面声功率级和音调值声明
| Wind turbines - Part 14: Declaration of apparent sound power level and tonality values
|
编号 | 中文名称 | 英文名称 |