| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 2782-10 Method 1006-1978 | 塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1006:合成树脂浸渍玻璃纤维织物中挥发物和树脂含量测定 | Methods of testing plastics - Glass reinforced plastics - Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric |
| BS 2782-4 Method 432A-1991 | 塑料试验方法.第4部分:化学性能.试验方法432A:不饱和聚酯树脂基增强塑料残余苯乙烯单体含量测定 | Methods of testing plastics - Chemical properties - Determination of residual styrene monomer content in reinforced plastics based on unsaturated polyester resins |
| BS 2782-4 Method 432D-1995 | 塑料试验方法.第4部分:化学性能.试验方法432D:不饱和聚酯树脂蒸发苯值测定 | Methods of testing plastics - Chemical properties - Determination of styrene evaporation from unsaturated polyester resins |
| BS 2782-4 Method 433A-1979 | 塑料试验方法.第4部分:化学性能.试验方法433A:环氧树脂与缩水甘油脂无机氯测定 | Methods of testing plastics - Chemical properties - Determination of inorganic chlorine in epoxide resins and glycidyl esters |
| BS 2782-6 Method 621D-1978 | 塑料试验方法.第6部分:尺寸特性.聚氯乙烯树脂压实表观体积密度测定 | Methods of testing plastics - Dimensional properties - Determination of compacted apparent bulk density of PVC resins |
| BS 2782-7 Method 721A-1988 | 塑料试验方法. 第7部分:流变性能.试验方法721A:树脂浸渍玻璃纤维测定树脂流失量 | Methods of testing plastics - Rheological properties - Determination of resin flow from resin impregnated glass fabric |
| BS 2782-8 Method 835A-1980 | 塑料的试验方法.其他特性.酚醛树脂胶凝时间的测定 | Methods of testing plastics - Other properties - Determination of gelation time of phenolic resins |
| BS 2782-8 Method 835B-1980 | 塑料的试验方法.其他特性.聚酯树脂胶凝时间的测定(手工方法) | Methods of testing plastics - Other properties - Determination of gelation time of polyester resins (manual method) |
| BS 2782-8 Method 835D-1980 | 塑料试验方法.第8部分:其他性能.试验方法835D:用热板测定热固性树脂胶凝时间 | Methods of testing plastics - Other properties - Determination of gelation time of thermosetting resins using a hot plate |
| BS 3396-3-1987 | 塑料增强用机织玻璃纤维织物.第3部分:聚酯树脂系统用成品布规范 | Woven glass fibre fabrics for plastics reinforcement - Specification for finished fabrics for use with polyester resin systems |
| BS 3532-1990 | 绝缘不饱和聚酯树脂系的规范方法 | Method of specifying unsaturated polyester resin systems |
| BS 3749-1991 | 聚酯和环氧树脂装置增强用的E形玻璃纤维粗纱织物规范 | Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems |
| BS 3816-1989 | 电源频率的电气绝缘用环氧树脂浇铸系统规范 | Specification for epoxy resin casting systems used for electrical insulating applications at power frequencies |
| BS 3953-1990 | 合成树脂粘结的机织玻璃纤维布层压板规范 | Specification for synthetic resin bonded woven glass fabric laminated sheet |
| BS 4154-1-1985 | 热固性聚酯树脂半透明玻璃纤维增强塑料波纹板.第1部分:材料和性能要求规范 | Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for material and performance requirements |
| BS 4154-2-1985 | 热固性聚酯树脂半透明玻璃纤维增强塑料波纹板.第2部分:外形和尺寸规范 | Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for profiles and dimensions |
| BS 4549-1-1997 | 增强塑料模塑件质量控制要求槽则.第1部分:玻璃纤维增强聚酯树脂模塑件质量控制方案制定指南 | Guide to quality control requirements for reinforced plastics mouldings - Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings |
| BS 5664-2.2-1988 | 电绝缘用不溶聚合树脂化合物.试验方法.涂覆粉末 | Solventless polymerisable resinous compounds used for electrical insulation - Methods of test - Coating powders |
| BS 5664-3.11-1995 | 电绝缘不溶可聚合树脂化合物.第3部分:各型材料规范.第11节:环氧树脂基涂层粉末 | Solventless polymerisable resinous compounds used for electrical insulation - Specification for individual materials - Epoxy resin-based coating powders |
| BS 5689-3.2-1995 | 电工用浸漆织物.第3部分:各型材料规范.第2节:用环氧树脂、聚氨基甲酸乙酯、有机硅树脂、聚酯、沥青或油性树 | Varnished fabrics for electrical purposes - Specifications for individual materials - Glass fabric based varnished fabrics with epoxy, polyurethane, silicone, polyester, bituminous or oleoresinous varnish |
| BS 5X 17-1998 | 航空航天用油基树脂清漆规范 | Specification for oleoresinous varnish for aerospace purposes |
| BS 6319-1-1983 | 建筑用合成树脂胶料试验.第1部分:试验样品制备方法 | Testing of resin and polymer/cement compositions for use in construction - Method for preparation of test specimens |
| BS 6319-10-1987 | 建筑用合成树脂胶料试验..第10部分:挠曲应力作用下反射温度测量方法 | Testing of resin and polymer/cement compositions for use in construction - Method for measurement of temperature of deflection under a bending stress |
| BS 6319-11-1993 | 建筑用树脂和聚合胶料成分测试.第11部分:压缩和拉伸塑性变形测定方法 | Testing of resin and polymer/cement compositions for use in construction - Methods for determination of creep in compression and in tension |
| BS 6319-12-1992 | 建筑用树脂和聚合胶料成分测试.第12部分:热膨胀系数和无限制线性收缩量测量方法 | Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of unrestrained linear shrinkage and coefficient of thermal expansion |
| BS 6319-2-1983 | 建筑用合成树脂胶料试验.第2部分:抗压强度测量方法 | Testing of resin and polymer/cement compositions for use in construction - Method for measurement of compressive strength |
| BS 6319-3-1990 | 建筑用合成树脂胶料试验.第3部分:挠曲和挠曲强度弹性模量测量方法 | Testing of resin and polymer/cement compositions for use in construction - Methods for measurement of modulus of elasticity in flexure and flexural strength |
| BS 6319-5-1984 | 建筑用合成树脂胶料试验.第5部分:固化合成树脂成分密度测定方法 | Testing of resin and polymer/cement compositions for use in construction - Methods for determination of density of hardened resin compositions |
| BS 6319-6-1984 | 建筑用合成树脂胶料试验.第6部分:压缩弹性模数测定方法 | Testing of resin and polymer/cement compositions for use in construction - Method for determination of modulus of elasticity in compression |
| BS 6319-7-1985 | 建筑用合成树脂胶料试验.第7部分:拉伸强度测试方法 | Testing of resin and polymer/cement compositions for use in construction - Method for measurement of tensile strength |
| BS 6319-8-1984 | 建筑用合成树脂胶料试验.第8部分:耐液体性评定方法 | Testing of resin and polymer/cement compositions for use in construction - Method for the assessment of resistance to liquids |
| BS 6319-9-1987 | 建筑用合成树脂胶料试验..第9部分:最大放热温度分类和测量方法 | Testing of resin and polymer/cement compositions for use in construction - Method for measurement and classification of peak exotherm temperature |
| BS 6374-3-1984 | 加工工业用聚合材料设备衬套.第3部分:烘干热固性树脂衬套规范 | Lining of equipment with polymeric materials for the process industries - Specification for lining with stoved thermosetting resins |
| BS 6374-4-1984 | 加工工业用聚合材料设备衬套.第4部分:冷固化处理的热固性树脂制衬套规范 | Lining of equipment with polymeric materials for the process industries - Specification for lining with cold curing thermosetting resins |
| BS 6747-1987 | 聚丙烯酸酯制树脂规范 | Specification for orthodontic resins |
| BS 6782-10-1998 | 涂料粘合剂.聚二异氰酸酯树脂单体二异氰酸盐的测定 | Binders for paints - Determination of monomeric diisocyanates in polyisocyanate resins |
| BS 6782-13-1998 | 涂料粘合剂.氯化聚二异氰酸盐酯树脂试验的一般方法 | Binders for paints. General methods of test for chlorinated polymerization resins |
| BS 6782-16.1-2000 | 涂料用粘合剂.醇酸树脂的试验方法.常规方法 | Binders for paints - Methods of test for alkyd resins - General methods |
| BS 6782-16.2-2000 | 涂料用粘合剂.醇酸树脂的试验方法.邻苯二甲酸酐含量的测定 | Binders for paints - Methods of test for alkyd resins - Determination of phthalic anhydride content |
| BS 6782-16.3-2000 | 涂料用粘合剂.醇酸树脂的试验方法.非皂化物质含量的测定 | Binders for paints - Methods of test for alkyd resins - Determination of unsaponifiable matter content |
| BS 6782-16.4-2000 | 涂料用粘合剂.醇酸树脂的试验方法.脂肪酸含量的测定 | Binders for paints - Methods of test for alkyd resins - Determination of fatty acid content |
| BS 6910-1-1988 | 电压范围为交流1000V 和直流1500V 的冷浇注树脂复合物和热缩电缆接头.第1部分:材料规范 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Specification for materials |
| BS 6910-2-1989 | 电压范围为交流1000V和直流1500Vd.c.的低温浇注树脂复合物和热缩电缆接头.第2部分:现场安装实用规程 | Cold pour resin compound and heat-shrink cable joints in the voltage range up to 1000 V a.c. and 1500 V d.c. Code of practice for on-site installation |
| BS 7332-1990 | 基于热固性树脂的装饰性连续叠层板材规范 | Specification for decorative continuous laminates (DCL) based on thermosetting resins |
| BS 7383-1990 | 煤矿用电压不超过11KV的作为外壳内连接电缆填充剂的冷浇树脂基化合物规范 | Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines |
| BS 7933-1-1998 | 电缆.附件.材料特性.在加工处理状态和处理前的树脂化合物 | Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state |
| BS 8204-6-2001 | 找平层、底基和就地铺装的地板材料.合成树脂地板材料.实施规程 | Screeds, bases and in-situ floorings - Synthetic resin floorings - Code of practice |
| BS DD 88-1983 | 土木工程用的非流动性树脂胶料的适用期评估方法 | Method for the assessment of pot life of non-flowing resin compositions for use in civil engineering |
| BS DD CEN/TS 14578-2003 | 给水或排水和下水道用塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GPR).安装的推荐实施 | Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation |
| BS DD CEN/TS 14632-2006 | 排水、排污和供水、压力和非压力用塑料管道系统.基于聚酯树脂(UP)玻璃纤维增强热固性塑料(GPR).合格评定指 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Guidance for the assessment of conformity |
| BS DD ISO/TS 10465-1-2007 | 基于非饱和聚酯树脂(GRP-UP)挠性玻璃加强管的地下装置.安装规程 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Installation procedures |
| BS EN 1013-2-1999 | 单层屋面用透光成型塑料薄板.玻璃纤维增强的聚酯树脂薄板的试验方法和特殊要求 | Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) |
| BS EN 12003-1998 | 地砖胶粘剂.反应树脂粘接剂的剪切粘接强度的测定 | Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives |
| BS EN 12808-1-1999 | 面砖用胶粘剂和灌浆.反应树脂灰浆耐化学性测定 | Adhesives and grouts for tiles - Determination of chemical resistance of reaction resin mortars |
| BS EN 12873-3-2006 | 材料对人类用水的影响.由迁移造成的影响.离子交换和吸附树脂的试验方法 | Influence of materials on water intended for human consumption - Influence due to migration - Test method for ion exchange and adsorbent resins |
| BS EN 13366-2001 | 肥料.测定微生物肥料鏊合功能用阳离子交换树脂的处理 | Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients |
| BS EN 13411-4-2002 | 钢丝绳索的接头.安全性.金属和树脂套节连接 | Terminations for steel wire ropes - Safety - Metal and resin socketing |
| BS EN 14364-2006 | 地下压力排水和排污水塑料管道系统.未饱和聚酯树脂(UP)玻璃纤维增强的热固性塑料(GRP).管道、配件和连接件 | Plastic piping systems for drainage and sewerage with or without pressure - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN 1544-2006 | 混凝土结构的保护和修整用产品和设备.试验方法.钢筋条固定用合成树脂产品(PC)持续拉伸荷载下蠕变的测定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for anchoring of reinforcing bars |
| BS EN 1877-1-2000 | 混凝土结构保护和维修用产品和系统.试验方法.与环氧树脂相关的活性功能.环氧当量的测定 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Determination of epoxy equivalent |
| BS EN 1877-2-2000 | 混凝土结构保护和维修用产品和系统.试验方法.与环氧树脂相关的活性功能.通过总碱值测定氨功能 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Determination of amine functions using the total basicity number |
| BS EN 2259-1995 | 硅树脂橡胶(VMQ).硬度:50 IRHD(国际橡胶硬度标度) | Silicone rubber (VMQ) - Hardness 50 IRHD |
| BS EN 2260-1995 | 硅树脂橡胶(VMQ).硬度:60 IRHD(国际橡胶硬度标度) | Silicone rubber (VMQ) - Hardness 60 IRHD |
| BS EN 2261-1995 | 硅树脂橡胶(VMQ).硬度:70 IRHD(国际橡胶硬度标度) | Silicone rubber (VMQ) - Hardness 70 IRHD |
| BS EN 2331-1993 | 纺织玻璃纤维预浸渍.测定单位面积树脂、纤维含量和纤维质量的试验方法 | Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area |
| BS EN 2332-1993 | 纺织玻璃纤维预浸渍.测定树脂流动的试验方法 | Textile glass fibre preimpregnates - Test method for the determination of the resin flow |
| BS EN 2375-1992 | 树脂预浸渍材料.生产批次抽样程序 | Resin preimpregnated materials - Production batch sampling procedure |
| BS EN 2559-1997 | 碳素纤维预浸织物.树脂成份,纤维成份以及单位面积纤维质量测定 | Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area |
| BS EN 2560-1998 | 炭纤维预浸渍物.树脂流量的测定 | Carbon fibre preimpregnates - Determination of the resin flow |
| BS EN 2564-1998 | 碳纤维层压板材.纤维、树脂含量和空隙率的测定 | Carbon fibre laminates - Determination of the fibre, resin and void contents |
| BS EN 438-1-2005 | 装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).说明和一般信息 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Introduction and general information |
| BS EN 438-2-2005 | 装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).性能测定 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Determination of properties |
| BS EN 438-3-2005 | 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第3部分:用于粘结支撑基质的不足2毫米 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for laminates less than 2mm thick intended for bonding to supporting substrates |
| BS EN 438-4-2005 | 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第4部分:厚度为2毫米和大于2毫米的压 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for compact laminates of thickness 2mm and greater |
| BS EN 438-5-2005 | 装饰用高压层压板材(HPL).基于热固性树脂的薄板材(通常称为层压板材).用于粘结支撑基质的厚度不足2毫米的楼 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Classification and specifications for flooring grade laminates less than 2mm thick intended for bonding to supporting substrates |
| BS EN 438-6-2005 | 基于热固性树脂的装饰用高压层压(HPL)薄板材.大于和等于2mm厚的外部用压实层压板材的分类和规范 | Decorative high-pressure laminates (HPL) sheets based on thermosetting resins - Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater - Classification and specifications for exterior-grade compact laminates of thickness 2mm and greater |
| BS EN 438-7-2005 | 装饰用高压层压板材(HPL).基于热固性树脂的薄板材(通常称为层压板材).内墙、外墙和天花板终饰用压实层压板 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Compact laminate and HPL composite panels for internal and external wall and ceiling finishes |
| BS EN 50089-1992 | 金属外壳充气高压开关装置和控制装置用的浇铸树脂分隔板规范 | Specification for cast resin partitions for metal-enclosed gas-filled high-voltage switchgear and controlgear |
| BS EN 60191-6-2-2002 | 半导体装置的机械标准化.表面安装的半导体装置封装外形图绘制的一般规则.1.5mm、1.27mm和1.00mm树脂球和引 | Mechanical standardization of semiconductor devices - General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages |
| BS EN 60317-0-4-1998 | 特种绕组线规范.一般要求.树脂或清漆浸渍玻璃纤维绕制、裸或漆包矩形铜线 | Specification for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 60317-0-5-2007 | 绕组线的特殊类型用规范.一般要求.玻璃纤维编制树脂或浸渍清漆的裸露或涂瓷釉的矩形铜线 | Specifications for particular types of winding wires - General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 60317-0-6-2001 | 特种绕组线规范.一般要求.玻璃丝绕包浸树脂或浸清漆的裸圆铜线或漆包圆铜线 | Specifications for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire |
| BS EN 60317-48-2000 | 特种绕组线规范.玻璃纤维缠绕树脂或清漆浸渍的裸露或漆包圆铜线,温度指数为155 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 |
| BS EN 60317-49-2000 | 特种绕组线规范.玻璃纤维缠绕树脂或清漆浸渍的裸露或漆包圆铜线,温度指数为180 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 |
| BS EN 60317-50-2000 | 特种绕组线规范.玻璃纤维缠绕树脂或清漆浸渍的裸露或漆包圆铜线,温度指数为200 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 |
| BS EN 60371-3-4-1996 | 云母基绝缘材料规范.第3部分:单项材料规范.第4节:用B级环氧树脂粘合剂粘结的聚酯薄膜衬底云母纸 | Specification for insulating materials based on mica - Specifications for individual materials - Polyester film-backed mica paper with a B-stage epoxy resin binder |
| BS EN 60371-3-5-2006 | 云母基绝缘材料.单项材料规范.用环氧树脂粘合剂粘结的待浸渍(VPI)的玻璃衬底云母纸 | Insulating materials based on mica - Specifications for individual materials - Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) |
| BS EN 60371-3-6-1996 | 云母基绝缘材料规范.第3部分:单项材料规范.第6节:用B级环氧树脂粘合剂粘结的玻璃纤维织物衬底云母纸 | Specification for insulating materials based on mica - Specifications for individual materials - Gloss-backed mica paper with a B-stage epoxy resin binder |
| BS EN 60371-3-7-1996 | 云母基绝缘材料规范.第3部分:单项材料规范.单根导线胶带用带有环氧树脂粘结剂的聚脂薄膜云母纸 | Specification for insulating materials based on mica - Specifications for individual materials - Polyester film mica paper with an epoxy resin binder for single conductor taping |
| BS EN 60454-3-11-2007 | 电工用压敏粘带.单项材料规范.涂有玻璃长丝、纤维素皱纹纸、聚酯非织布、环氧树脂和压敏粘合剂的聚酯薄膜化 | Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives |
| BS EN 60454-3-6-1998 | 电气用压敏胶带规范.单个材料规范.带丙烯酸类树脂热塑胶粘剂的聚碳酸酯膜带. | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polycarbonate film tapes with acrylic thermoplastic adhesive |
| BS EN 60455-1-1998 | 电气绝缘用树脂基电抗复合物.定义和一般要求 | Resin based reactive compounds used for electrical insulation - Definitions and general requirements |
| BS EN 60455-2-1999 | 电气绝缘用树脂基电抗复合物.试验方法 | Resin based reactive compounds used for electrical insulation - Methods of test |
| BS EN 60455-3-1-2003 | 电气绝缘用树脂基反应性复合物.单项材料规范.未加填料的环氧树脂复合物.第1活页:未加填料的环氧树脂复合物 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unfilled epoxy resinous compounds - Sheet 1: Unfilled epoxy resinous compounds |
| BS EN 60455-3-2-2003 | 电气绝缘用树脂基反应性复合物.单项材料规范.填石英的环氧树脂复合物.第2活页:填石英的环氧树脂复合物 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Quartz filled epoxy resinous compounds - Sheet 2: Quartz filled epoxy resinous compounds |
| BS EN 60455-3-3-2003 | 电气绝缘用树脂基反应性复合物.单项材料规范.未加填料的聚氨酯复合物.第3活页:未加填料的聚氨酯复合物 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unfilled polyurethane compounds - Sheet 3: Unfilled polyurethane compouds |
| BS EN 60455-3-4-2003 | 电气绝缘用树脂基反应性复合物.单项材料规范.加填料的聚氨酯复合物.第4部分:加填料的聚氨酯复合物 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Filled polyurethane compounds - Sheet 4: Filled polyurethane compounds |
| BS EN 60455-3-5-2006 | 电气绝缘用树脂基活性化合物.单项材料规范.不饱和聚酯基填充性树脂 | Resin based reactive compounds used for electrical insulation - Specifications for individual materials - Unsaturated polyester based impregnating resins |
| BS EN 60893-1-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.定义、标记和一般要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Definitions, designations and general requirements |
| BS EN 60893-2-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.试验方法 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Methods of test |
| BS EN 60893-3-1-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.工业硬质层压薄板类型要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for types of industrial rigid laminated sheets |
| BS EN 60893-3-2-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.环氧树脂基硬质层压薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins |
| BS EN 60893-3-3-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.三聚氰胺树脂基硬质层压薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins |
| BS EN 60893-3-4-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.酚醛树脂基硬质层压薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins |
| BS EN 60893-3-5-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.聚酯树脂基硬质层压薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins |
| BS EN 60893-3-6-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.单项材料规范.硅酮树脂基硬质层压薄板要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins |
| BS EN 60893-3-7-2004 | 绝缘材料.电工用热固性树脂基工业硬质层压薄板.各种材料规范.对聚酰亚胺树脂基刚性层压薄板的要求 | Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Specifications for individual materials - Requirements for rigid laminated sheets based on polymide resins |
| BS EN 61212-2-2006 | 绝缘材料.电器用基于热固树脂的工业型刚性压层圆管和棒材.第2部分:试验方法 | Insulating materials — Industrial rigid round laminated tubes androds based on thermosetting resins for electrical purposes —Part 2: Methods of test |
| BS EN 61212-3-2-2006 | 电工用工业刚性圆热固树脂层压管和棒材.各种材料规范.第2部分:圆层压摸制管 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes |
| BS EN 61212-3-3-2006 | 电工用工业刚性圆热固树脂层压管和棒材.第3部分:各种材料规范.圆层压压制杆 | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods |
| BS EN 62011-1-2002 | 绝缘材料.基于热固树脂材料的矩形和六角形截面的工业用刚性模塑的叠层管材和棒材.定义、符号和名及一般要求 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Definitions, designations and general requirements |
| BS EN 62011-2-2004 | 绝缘材料.电工用热固性树脂基矩形和六边形截面的工业硬质模塑层压管材和杆材.试验方法 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Methods of test |
| BS EN 62011-3-1-2004 | 绝缘材料.电工用热固性树脂基矩形和六边形截面的工业硬质模塑层压管材和杆材.矩形和六边形横截面的管材和杆 | Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical puroposes - Tubes and rods of rectangular and hexagonal cross-section |
| BS EN 650-1997 | 弹性地面覆盖物.有黄麻衬或聚酯毡衬或聚酯树脂和聚氯乙烯衬的聚氯乙烯地面覆盖物.规范 | Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on polyester felt with polyvinyl chloride backing - Specification |
| BS EN ISO 10082-2000 | 塑料.酚醛树脂.分类和试验方法 | Plastics - Phenolic resins - Classification and test methods |
| BS EN ISO 10283-2007 | 涂料和清漆用粘合剂.异氰酸酯树脂中单节显性二异氰酸盐的测定 | Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins |
| BS EN ISO 1060-1-1999 | 塑料.氯乙烯的均聚物和共聚物树脂.标示体系和基础规范 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Designation system and basis for specifications |
| BS EN ISO 1060-2-1999 | 塑料.氯乙烯的均聚物和共聚物树脂.试样的制备和性能的测定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Preparation of test samples and determination of properties |
| BS EN ISO 10618-2004 | 碳纤维.树脂浸渍纱拉伸性能的测定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn |
| BS EN ISO 11401-1998 | 塑料.酚醛树脂.用液体色谱法分离 | Plastics - Phenolic resins - Separation by liquid chromatography |
| BS EN ISO 11402-2005 | 酚醛树脂、氨基树脂和缩合树脂.游离甲醛含量的测定 | Phenolic, amino and condensation resins - Determination of free-formaldehyde content |
| BS EN ISO 11409-1998 | 塑料.酚醛树脂.差示扫描量热法测定反应热和反应温度 | Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry |
| BS EN ISO 11667-2000 | 纤维增强塑料.模压化合物和聚酯胶片.树脂、增强的纤维和矿物填料含量的测定.溶解方法 | Fibre reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforcement-fibre and mineral-filler content - Dissolution methods |
| BS EN ISO 11668-2001 | 涂料和清漆用粘结剂.含氯聚合树脂.通用试验方法 | Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test |
| BS EN ISO 11908-1996 | 色漆和清漆用粘合剂.胺基树脂.一般试验法 | Binders for paints and varnishes - Amino resins - General methods of test |
| BS EN ISO 11909-2007 | 涂料和清漆用粘合剂.聚亚安酯树脂.一般试验法 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test |
| BS EN ISO 12215-1-2000 | 小艇.船体结构和船材尺寸.材料：玻璃纤维增强热固性树脂标准层压板材 | Small craft - Hull construction and scantlings - Materials - Thermosetting resins, glass-fibre reinforcement, reference laminate |
| BS EN ISO 1264-1997 | 塑料.氯乙烯的均聚物和共聚物树脂.水萃物的pH值测定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract |
| BS EN ISO 1265-2007 | 塑料.聚氯乙烯树脂.杂质和外来杂质数的测定 | Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles |
| BS EN ISO 1269-2006 | 塑料.氯乙烯均聚物和共聚物树脂.挥发性物质(包括水)的测定 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) |
| BS EN ISO 15252-1-2000 | 塑料.环氧树脂模塑化合物(EP-PMCs).命名系统和基本规范 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Designation system and basis for specifications |
| BS EN ISO 15252-2-2000 | 塑料.环氧树脂模塑化合物(EP-PMCs).试样制备和特性测定 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Preparation of test specimens and determination of properties |
| BS EN ISO 1624-2002 | 塑料.氯乙烯均聚物和共聚物树脂.水滤筛析 | Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water |
| BS EN ISO 1628-2-2000 | 塑料.用毛细粘度计测定稀释溶液中聚合物的粘度值.聚氯乙烯树脂 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Poly(vinyl chloride) resins |
| BS EN ISO 1675-1998 | 塑料.液态树脂.比重计法测定密度 | Plastics - Liquid resins - Determination of density by the pyknometer method |
| BS EN ISO 2114-2000 | 塑料(聚酯树脂)、涂料和清漆(粘合剂).部分酸值和总酸值的测定 | Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value |
| BS EN ISO 21627-1-2003 | 塑料.环氧树脂.氯含量测定.无机氯 | Plastics - Epoxy resins - Determination of chlorine content - Inorganic chlorine |
| BS EN ISO 21627-2-2003 | 塑料.环氧树脂.氯含量测定.易皂化氯 | Plastics - Epoxy resins - Determination of chlorine content - Easily saponifiable chlorine |
| BS EN ISO 21627-3-2003 | 塑料.环氧树脂.氯含量测定.氯总量 | Plastics - Epoxy resins - Determination of chlorine content - Total chlorine |
| BS EN ISO 2535-2002 | 塑料.未饱和的聚酯树脂.室温时的胶凝时间的测量 | Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature |
| BS EN ISO 2554-1999 | 塑料.不饱和聚酯树脂.羟基值的测定 | Plastics - Unsaturated polyester resins - Determination of hydroxyl value |
| BS EN ISO 2555-2000 | 塑料.液态或象乳胶或分散体一样的树脂.用布洛克菲文德试验法测定视粘度 | Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method |
| BS EN ISO 308-1998 | 塑料.酚制模材料.丙酮可溶性物质测定(非制模状态下树脂含量) | Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) |
| BS EN ISO 3219-1994 | 塑料.液态或乳状态或分散剂作用的聚合物/树脂.用具有规定剪切率的旋转式粘度计测定粘度 | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate |
| BS EN ISO 3521-2000 | 塑料.不饱和聚酯和环氧树脂.总体积收缩量的测定 | Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage |
| BS EN ISO 3672-1-2001 | 塑料.不饱和聚酯树脂.名称与符号系统 | Plastics - Unsaturated-polyester resins (UP-R) - Designation system |
| BS EN ISO 3672-2-2001 | 塑料.不饱和聚酯树脂.试样的制备和性能的测定 | Plastics - Unsaturated-polyester resins (UP-R) - Preparation of test specimens and determination of properties |
| BS EN ISO 3673-1-2000 | 塑料.环氧树脂.名称与符号 | Plastics - Epoxy resins - Designation |
| BS EN ISO 3673-2-2000 | 塑料.环氧树脂.试样的制备和特性的测量 | Plastics - Epoxy resins - Preparation of test specimens and determination of properties |
| BS EN ISO 4597-1-1998 | 塑料.环氧树脂的硬化剂和促进剂.名称与牌号 | Plastics - Hardeners and accelerators for epoxide resins - Designation |
| BS EN ISO 4608-1998 | 塑料.一般用途的氯乙烯均聚物和共聚物树脂.室温下增塑剂吸收性的测定 | Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature |
| BS EN ISO 4610-2001 | 塑料.氯乙烯均聚物和共聚物树脂.用喷气式的筛滤器的筛析 | Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus |
| BS EN ISO 4615-1999 | 塑料.未饱和聚酯和环氧树脂.氯的总含量的测定 | Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content |
| BS EN ISO 4895-2000 | 塑料.液态环氧树脂.结晶倾向的测定 | Plastics - Liquid epoxy resins - Determination of tendency to crystallize |
| BS EN ISO 584-1998 | 塑料.不饱和聚酯树脂.80℃时的反应性测定(常规方法) | Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) |
| BS EN ISO 6401-2004 | 塑料.氯乙烯均聚物和共聚物树脂.剩余氯乙烯单体的测定.气相色谱法 | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method |
| BS EN ISO 6744-1-2000 | 涂料和清漆用粘合剂.醇酸树脂.一般方法 | Binders for paints and varnishes - Alkyd resins - General methods |
| BS EN ISO 6744-2-2000 | 涂料和清漆用粘合剂.醇酸树脂.邻苯二甲酸酐含量的测定 | Binders for paints and varnishes - Alkyd resins - Determination of phthalic anhydride content |
| BS EN ISO 6744-3-2000 | 涂料和清漆用粘合剂.醇酸树脂.非皂化物质含量的测定 | Binders for paints and varnishes - Alkyd resins - Determination of unsaponifiable matter content |
| BS EN ISO 6744-4-2000 | 涂料和清漆用粘合剂.醇酸树脂.脂肪酸含量的测定 | Binders for paints and varnishes - Alkyd resins - Determination of fatty acid content |
| BS EN ISO 7142-2007 | 涂料和清漆用粘合剂.环氧树脂.一般试验方法 | Binders for paints and varnishes - Epoxy resins - General methods of test |
| BS EN ISO 7327-1996 | 塑料.环氧树脂用固化剂和促进剂.酸酐中游离酸测定 | Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride |
| BS EN ISO 8619-2005 | 塑料.酚醛树脂粉.在加热的玻璃板上流动距离的测定 | Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate |
| BS EN ISO 8974-2002 | 塑料.酚醛树脂.用气相色谱法测定残余酚含量 | Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography |
| BS EN ISO 8975-1995 | 塑料.酚醛树脂.pH值的测定 | Plastics - Phenolic resins - Determination of pH |
| BS EN ISO 8987-2006 | 塑料.酚醛树脂.aB-转换离子试验板上的活性测定 | Plastics - Phenolic resins - Determination of reactivity on aB-transformat ion test plate |
| BS EN ISO 8988-2006 | 塑料.酚醛树脂.六亚甲基四胺含量的测定.凯氏法、过氯酸法和盐酸法 | Plastics - Phenolic resins - Determination of hexamethylene-tetramine content - Kjeldahl method, perchloric acid method and hydrochloric acid method |
| BS EN ISO 8989-1998 | 塑料.液体酚醛树脂.水混溶性的测定 | Plastics - Liquid phenolic resins - Determination of water miscibility |
| BS EN ISO 9396-2001 | 塑料.酚醛树脂.用自动装置测定在给定温度下的凝胶时间 | Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus |
| BS EN ISO 9771-1997 | 塑料.酚醛树脂.测定可溶酚醛树脂在酸性条件下凝固时假绝热温升 | Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions |
| BS EN ISO 9944-1995 | 塑料.酚醛树脂.树脂萃取物电导率的测定 | Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts |
| BS ISO 11376-1997 | 塑料.环氧树脂和环氧丙基酯.无机氯的测定 | Plastics. Epoxy resins and glycidyl esters. Determination of inorganic chlorine |
| BS ISO 11667-1997 | 纤维增强塑料.模压化合物和聚酯胶片.树脂、增强纤维和矿物填料含量测定.溶解方法 | Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS ISO 1268-7-2001 | 纤维增强塑料.试验板的生产方法.树脂转换模塑法 | Fibre-reinforced plastics - Methods of producing test plates - Resin transfer moulding |
| BS ISO 14654-2000 | 混凝土增强用环氧树脂涂覆钢 | Epoxy-coated steel for the reinforcement of concrete |
| BS ISO 14656-2000 | 混凝土加筋钢涂层用环氧树脂粉末和密封材料 | Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete |
| BS ISO 14848-1998 | 塑料制品.不饱和聚酯树脂.130℃下反应性测定 | Plastics - Unsaturated-polyester resins - Determination of reactivity at 130 °C |
| BS ISO 15034-1999 | 复合材料.预浸料坯.树脂流动的测定 | Composites - Prepregs - Determination of resin flow |
| BS ISO 15840-2006 | 船舶和海上技术.海上设备用热固性树脂纤维玻璃管和管件的标准规范 | Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| BS ISO 21318-2007 | 塑料.环氧树脂.水树脂浸渍物电导性测定 | Plastics - Epoxy resins - Determination of electrical conductivity of aqueous resin extracts |
| BS ISO 22498-2006 | 塑料.氯乙烯均聚物和共聚物树脂.采用机械筛分法进行的粒度测定 | Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving |
| BS ISO 3597-1-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.棒的一般考虑和制备 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - General considerations and preparation of rods |
| BS ISO 3597-2-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.弯曲强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength |
| BS ISO 3597-3-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.压缩强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength |
| BS ISO 3597-4-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.表观层间剪切强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of apparent interlaminar shear strength |
| BS ISO 3672-1-2000 | 塑料.未饱和聚酯树脂(UP-R).标记系统 | Plastics. Unsaturated-polyester resins (UP-R). Designation system |
| BS ISO 3672-2-2000 | 塑料.未饱和聚酯树脂(UP-R).试样制备和性能测定 | Plastics. Unsaturated-polyester resins (UP-R). Preparation of test specimens and determination of properties |
| BS ISO 5833-2002 | 外科植入物.丙烯酸树脂粘接剂 | Implants for surgery - Acrylic resin cements |
| BS PL 4-2005 | 高强度纤维增强复合物的低压层压用不饱和聚酯树脂的特性.规范 | Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Specification |
| BS PL 5-2005 | 高强度纤维增强复合物的低压层压用不饱和聚酯树脂.试验方法 | Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Test methods |
| BS PL 7-2005 | 玻璃纤维增强叠层制品的低压层压用不饱和聚酯树脂.试验方法 | Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates - Test methods |
| DD 88-1983 | 土木工程用不流动树脂成分坩埚寿命评定方法 | Method for the assessment of pot life of non-flowing resin compositions for use in civil engineering |
| 编号 | 中文名称 | 英文名称 |