德国树脂标准(DIN resin standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
DIN 10235-1999 胡椒和胡椒油树脂.胡椒碱含量的测定.高效液相色谱法 Pepper an pepper oleoresins - Determination of piperine content - Method using high-performance liquid chromatography (HPLC)
DIN 16867-1982 化工管路用玻璃纤维增强式聚酯树脂管道、配件和接头.交货技术条件 Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions
DIN 16868-1-1994 玻璃纤维增强式不饱和聚酯树脂(UP-GF)管材.第1部分:缠绕式和填充式.尺寸 Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Wound, filled; dimensions
DIN 16868-2-1994 玻璃纤维增强式不饱和聚酯树脂(UP-GF)管材.第2部分:缠绕式和填充式.一般质量要求、检验 Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled; General quality requirements, testing
DIN 16869-1-1995 离心浇注玻璃纤维增强聚脂树脂管(VP-GF).第1部分:尺寸 Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Dimensions
DIN 16869-2-1995 离心浇注玻璃纤维增强聚脂树脂管(VP-GF).第2部分:一般质量要求、检验 Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing
DIN 16870-1-1987 纺织玻璃纤维增强环氧树脂管.尺寸 Wound glass fibre reinforced epoxy resin pipes; dimensions
DIN 16871-1982 离心铸塑玻璃纤维增强环氧树脂管.尺寸 Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes; Dimensions
DIN 16872-1993 热塑性塑料管道用管接头组件.玻璃纤维增强的聚酯树脂(UP-GE)法兰.尺寸 Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions
DIN 16944-1988 玻璃纤维增强的反应型树脂模塑材料.试验方法 Glass fibre reinforced reaction resin moulding materials; test methods
DIN 16945-1989 树脂、硬化剂、加速剂和催化树脂的试验. Testing of resins, hardeners and accelerators, and catalyzed resins
DIN 16946-1-1989 凝固注塑树脂.第1部分:检验方法 Cured casting resins; testing
DIN 16946-2-1989 凝固注塑树脂.第2部分:类型 Cured casting resins; types
DIN 16964-1988 绕制玻璃纤维增强聚酯树脂管.一般质量要求和试验 Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing
DIN 16965-1-1982 绕制玻璃纤维增强聚酯树脂管(UP-GF).A型管.尺寸 Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A pipes, dimensions
DIN 16966-1-1988 玻璃纤维增强聚酯树脂(UP-GF)异型件和连接件.第1部分:一般质量要求和检验 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing
DIN 16966-2-1982 玻璃纤维增强式聚酯树脂管道配件和接头.弯管.尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions
DIN 16966-4-1982 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.三通喷管嘴尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions
DIN 16966-5-1982 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.缩径管.尺寸 Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions
DIN 16966-7-1995 玻璃纤维增强聚酯树脂管道连接件及其组件.第7部分:套筒、法兰、法兰连接和对接件.一般质量要求和试验方法 Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods
DIN 16967-2-1982 玻璃纤维增强环氧树脂(EP-GF)管件和接头.弯管、三通管、尺寸 Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions
DIN 16978-1975 聚缩醛树脂圆截面空心棒.尺寸 Polyacetale hollow rods of circular cross-section; dimensions
DIN 18157-3-1986 第3部分:采用环氧树脂粘合剂的稀灰浆工艺陶瓷衬砌的应用 Application of ceramic tiling by the thin bed method using epoxy resin adhesives
DIN 18159-2-1978 建筑中现场发泡用泡沫塑料.绝热用脲-甲醛树脂现场发泡的泡沫塑料.应用、性能、制作、检验 Cellular Plastics as in-situ Foam in Building; In-situ Foam Produced from Urea-formaldehyde (UF) Resin for Thermal Insulation; Application, Properties, Execution, Testing
DIN 18556-1985 合成树脂灰浆涂层材料和合成树脂灰浆的检验 Testing of coating material for synthetic resin plasters and of synthetic resin plasters
DIN 18558-1985 合成树脂灰浆.术语、要求、用途 Synthetic resin plasters; terminology, requirements, application
DIN 18820-1-1991 承载构件用玻璃纤维增强非饱和聚酯树脂和苯甲酰甲基树脂制层压塑料(GF-UP、GF-PHA).第1部分:结构、制造和特 Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); structure, manufacture and characteristics
DIN 18820-2-1991 承载构件用玻璃纤维增强式非饱和聚酯和苯酚树脂制层压塑料(GF-UP.GF-PHA).第2部分:标准层压塑料的物理参数 Laminates of textile glass-reinforced unsaturared polyester and phenolic resins for load-bearing structural members (GF-UP, GF-PHA); physical parameters for standard laminates
DIN 18820-3-1991 承载构件用玻璃纤维增强非饱和聚酯树脂和苯甲酰甲基树脂制层压塑料(GF-UP、GF-PHA).第3部分:承载层压塑料的 Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); protective measures for load-bearing laminates
DIN 18820-4-1991 承载构件用玻璃纤维增强非饱和聚脂树酯和苯甲酰甲基树脂制层压塑料(GF-UP、GF-PHA).第4部分:试验和质量控制 Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); tests and quality control
DIN 19633-1986 水处理用离子交换树脂.交货技术条件 Ion exchange resins for water treatment; technical delivery conditions
DIN 29502-1-1986 航空航天.织物增强的丙烯酸类树脂的飞机窗玻璃的边缘加强材料.设计指令 Aerospace; edge reinforcements for aircraft glazings of fabric reinforced acrylic resins; directives for design
DIN 29970-1998 航空航天.酚醛树脂涂层的聚酰胺纸制蜂窝芯.技术规范 Aerospace - Honeycomb cores of polyamide paper, phenolic resin coated - Technical specification
DIN 29971-1991 航空航天.不定向碳纤维环氧树脂薄板和预浸渍带.技术规范 Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification
DIN 46264-1988 浇注树脂绝缘子的高压引线端子 High-voltage feed-through terminals with cast resin insulator
DIN 46449-1970 电工绝缘漆和绝缘树脂材料.涂饰漆.试验方法 Insulating Varnishes and Insulating Resin Materials for Electrical Purposes; Finishing Varnishes, Test Methods
DIN 51290-1-1991 机器工程用聚合物混凝土(反应性树脂混凝土)的检验.第1部分:术语 Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; terminology
DIN 51290-2-1991 机器工程用反应性树脂混凝土的检验.第2部分:粘合剂、填充剂和反应性树脂混合物的检验 Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds
DIN 51290-3-1991 机器工程用反应性树脂混凝土的检验.第3部分:分别制作试样的检验 Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of separatly manufactured specimens
DIN 51290-4-1991 机器工程用反应性树脂混凝土的检验.第4部分:生产过程中和成品部件的检验 Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; in-process testing and testing of final parts
DIN 53164 Bb.1-1988 颜料和填充料的试验.白色颜料的相对扩散力的测定.背底法、程序、实施示例、试验介质醇酸树脂 Testing of pigments and extenders; determination of relative scattering power of white pigments; black-ground method, procedure, example, test medium alkyd resin
DIN 53177-2002 涂料和清漆用粘合剂.液态树脂动态粘度的测量.根据乌贝罗德(Ubbelohde)法采用等温型毛细管粘度计测量树脂溶 Binders for paints and varnishes - Measurement of the dynamic viscosity of liquid resins; Resin solutions and oils by the capillary viscosimeter of isocelses type according to Ubbelohde
DIN 53180-1996 漆和类似涂料的粘结剂.树脂软化温度测定 Binders for paints and varnishes - Determination of the softening temperature of resins
DIN 53181-1991 漆油漆、清漆和类似涂料的粘结剂.用毛细方法测定树脂溶化间隔时间 Binders for paints, varnishes and similar coating materials; determination of the melting interval of resins by the capillary method
DIN 53238-30-1995 颜料和稀释剂.色散性能的评估方法.第30部分:低黏度试验介质醇酸树脂系统.氧化干燥法 Pigments and extenders - Method of assessment of ease of dispersion - Part 30: Test medium alkyd resin system, low viscous, hardening by air oxidation
DIN 53238-34-2002 颜料和填充剂.易分散性的评估方法.第34部分:低粘度烘干式试验介质醇酸树脂/三聚氰胺树脂系统 III Pigments and extenders - Method of assessment of ease of dispersion - Part 34: Test medium alkyd-/melamine resin system III, low viscous, stoving type
DIN 53394-1974 塑料的试验.在模塑状态下不饱和聚酯树脂模塑材料中单体苯乙的百分比量的测定.用Wijs溶液法测定 Testing of plastics; determination of the percentage of styrene in unsaturated polyester resin moulding material in the moulded state, test method with Wijs-solution
DIN 53394-2-1993 塑料的检验.以不饱合聚脂树脂为基的反应模塑材料中苯乙烯百分含量的测定.气相色谱法 Testing of plastics; determination of the percentage of styrene in reaction moulding materials based on unsaturated polyester resins; gaschromatography method
DIN 53748-1970 酚醛-甲醛树脂的化学分析.酚醛塑料模塑材料和模制材料 Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials
DIN 54407-2003 离子交换树脂的试验.树脂珠粒粒度分布的测定 Testing of ion exchange resins - Determination of bead size distribution
DIN 54411-2004 离子交换器的检验.离子交换器和聚合物吸附树脂的循环检验方法 Testing of ion exchangers - Recycling method for testing ion exchangers and polymer adsorption resins
DIN 54813-1994 塑料检验.纺织玻璃纤维增强的聚酯树脂塑料的连接试验.用弯曲剪切试验测定断裂负荷 Testing of plastics; testing of joints of textile glass reinforced polyester resins; determination of the breaking load by the bending shear test
DIN 54815-1-1998 填充聚酯树脂模塑材料的管材.第1部分:尺寸、材料和标识 Pipes of filled polyester resin moulding materials - Part 1: Dimensions, materials, designation
DIN 54815-2-1998 填充聚酯树脂模塑材料的管材.第2部分:要求和试验 Pipes of filled polyester resin moulding materials - Part 2: Requirements, testings
DIN 55984 Bb.1-1989 颜料的试验.白色和浅灰色介质的遮盖力值的测定.使用白色醇酸树脂漆的工艺过程实例 Testing of pigments; determination of a hiding power value of white and light grey media; example for the procedure using a white alkyd paint
DIN 57291-2-1979 电缆配件用的化合物.在固化前和固化状态时的浇注树脂化合物(VDE规范) Compounds for use in cable accessories; casting resinous compounds before cure and in the cured state [VDE Specification]
DIN 65065-1979 航空航天.纤维增强树脂.技术规范 Aerospace; resins for fiber reinforced, technical specification
DIN 65146-2-1991 航空航天.预浸渍的碳纤维长丝织物和环氧树脂.技术规范 Aerospace; preimpregnated woven fabric of carbon filament yarn and epoxy resin; technical specification
DIN 65383-1997 航空航天.结构用热固环氧树脂纺织玻璃纤维长丝织物预浸渍品.技术规范 Aerospace - Thermosetting epoxy woven glass filament fabric preimpregnated for structural applications - Technical specification
DIN 65426-2-1989 航空航天.芳族聚酰胺.第2部分:由高模数长丝纱线和环氧树脂制成的长丝织物预浸渍体的技术规范 Aerospace; aromatic polyamide (aramid); woven filament fabric prepreg from high-modulus filament yarn and epoxy resin; technical specification
DIN 65453-1993 航空航天.碳纤维和双马来酰亚胺树脂或聚酰亚胺树脂制的预浸渍不定向薄板材 Aerospace; preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin; technical specification
DIN 65467-1999 航空航天.带和不带增强物的热固化树脂系统的试验.DSC方法 Aerospace - Testing of thermosetting resin systems with and without reinforcement - DSC method
DIN CEN/TS 14578-2003 给水或排水排污用塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).安装的推荐性实施规 Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version CEN/TS 14578:2003
DIN CEN/TS 14807-2005 塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).地下GRP-UP管道的结构分析指南 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2004
DIN EN 1013-2-1999 单层屋顶反光塑料型板.第2部分:玻璃纤维增强聚酯树脂板(GF-UP)特殊要求和试验方法 Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP); German version EN 1013-2:1998
DIN EN 12003-1997 瓷砖胶粘剂.反应性树脂胶粘剂抗剪强度测定 Adhesives for tiles - Determination of shear adhesion strength of reaction resin adhesives; German version EN 12003:1997
DIN EN 12808-1-1999 瓷砖胶粘剂和接缝灰浆.第1部分:反应性树脂灰浆耐化学腐蚀性测定 Adhesives and grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars; German version EN 12808-1:1999
DIN EN 12873-3-2006 材料对人类生活用水的影响.离子迁移的影响.第3部分:离子交换和吸附树脂的试验方法 Influence of materials on water intended for human consumption - Influence due to migration - Part 3: Test method for ion exchange and adsorbent resins English version of DIN EN 12873-3:2006-06
DIN EN 13366-2001 肥料.螯合的微量养料含量和微量养料的螯合系数测定用阳离子交换树脂处理 Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients; German version EN 13366:2001
DIN EN 13411-4-2002 钢丝绳接线端.安全性.第4部分:金属和树脂套接; 德文版本 EN 13411-4:2002 Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing; German version EN 13411-4:2002
DIN EN 14364-2006 压力和无压力排水和排污塑料管道系统.基于不饱和聚酯树脂的玻璃增强热固性塑料(GRP)系统.管件、配件和连接 Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints English version of DIN EN 14364:2006-07
DIN EN 1544-2007 保护和修复混凝土结构的产品和系统.试验方法.测定用于加固钢筋的合成树脂产品(PC)在长期张力荷载下的蠕变 Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars; English version of DIN EN 1544:2007-01
DIN EN 1877-1-2000 混凝土结构保护和维修用产品和系统.试验方法.与环氧树脂相关的活性函数.第1部分:环氧基当量测定 Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent; German version EN 1877-1:2000
DIN EN 1877-2-2000 混凝土结构保护和维修用产品和系统.试验方法.与环氧树脂相关的活性成分.第2部分:通过总碱值测定氨成分 Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number; German version EN 1877-2:2000
DIN EN 2259-1995 航空航天系列.硅树脂橡胶(VMQ).硬度为 50 国际橡胶硬度标度; 德文版本 EN 2259:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD; German version EN 2259:1995
DIN EN 2260-1995 航空航天系列.硅树脂橡胶(VMQ).硬度为:60 国际橡胶硬度标度; 德文版本 EN 2260:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD; German version EN 2260:1995
DIN EN 2261-1995 航空航天系列.硅树脂橡胶(VMQ).硬度为:70 国际橡胶硬度标度; 德文版本 EN 2261:1995 Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD; German version EN 2261:1995
DIN EN 2262-1995 航空航天系列.高撕裂强度的硅树脂橡胶(VMQ/PVMQ).硬度为:50 国际橡胶硬度标度; 德文版本 EN 2262:1995 Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD; German version EN 2262:1995
DIN EN 2331-1993 航空航天.纺织玻璃纤维预浸带.测定树脂含量、纤维含量以及单位面积纤维质量的试验方法 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993
DIN EN 2332-1993 航空航天.纺织玻璃纤维预浸带.测定树脂流动的试验方法 Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993
DIN EN 2375-1992 航空航天.树脂浸渍材料.产品的批取样程序 Aerospace series; resin preimpregnated materials; production batch sampling procedure; german version EN 2375:1992
DIN EN 2559-1997 航空航天系列.碳纤维预浸带.树脂成份、纤维成份以及单位面积纤维重量测定 Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997
DIN EN 2560-1998 航空航天系列.碳纤维预浸渍.树脂流的测定 Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998
DIN EN 2564-1998 航空航天系列.碳纤维层压塑料.纤维含量、树脂含量和气孔的测定 Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998
DIN EN 438-1-2005 装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).第1部分:说明和一般信息 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information; German version EN 438-1:2005
DIN EN 438-2-2005 装饰用高压层压板(HPL).热固性树脂基板材(一般称为层压板).第2部分:性能测定 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties; German version EN 438-2:2005
DIN EN 438-3-2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第3部分:用于粘结支撑基质的不足2毫米 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates; German version EN 438-3:2005
DIN EN 438-4-2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第4部分:厚度为2毫米和大于2毫米的压 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater; German version EN 438-4:2005
DIN EN 438-5-2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第5部分:用于粘结支撑基质的厚度不足2 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates; German version EN 438-5:2005
DIN EN 438-6-2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第6部分:大于和等于2毫米厚的外部用压 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 6: Classification and specifications for exterior-grade compact laminates of thickness 2 mm and greater; German version EN 438-6:2005
DIN EN 438-7-2005 装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第7部分:内墙、外墙和天棚用压实层压 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes; German version EN 438-7:2005
DIN EN 50089-1994 金属外壳充气高压开关设备和控制装置用铸造树脂隔板; 德文版本 EN 50089:1992 Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear; German version EN 50089:1992
DIN EN 50089/A1-1995 金属外壳充气高压开关设备和控制装置用浇铸树脂隔板.修改件 A1; 德文版本 EN 50089:1992/A1:1994 Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear; Amendment A1; German version EN 50089:1992/A1:1994
DIN EN 60317-0-4-2006 特种绕组线规范.第0-4部分:一般要求.玻璃纤维绕组浸树脂或浸清漆裸扁铜线或漆包扁铜线 Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-4:1997 + A1:1999 + A2:2005); German version EN 60317-0-4:1998 + A1:2000 + A2:2005
DIN EN 60317-0-5-2007 特种绕组线规范.第0-5部分:一般要求.玻璃纤维编织树脂或浸漆的裸或漆包扁铜线 Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-5:2006); German version EN 60317-0-5:2007
DIN EN 60317-0-6-2007 特种绕组线规范.第0-6部分:一般要求.玻璃纤维包浸树脂或浸清漆的裸圆铜线或漆包圆铜线 Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2001 + A1:2006); German version EN 60317-0-6:2001 + A1:2006
DIN EN 60317-48-2000 特种绕组线规范.第48部分:温度指数155的玻璃纤维缠绕树脂或清漆浸渍裸圆铜线或漆包圆铜线 Specification for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:1999); German version EN 60317-48:2000
DIN EN 60317-49-2000 特种绕组线规范.第49部分:温度指数180的玻璃纤维绕包树脂或漆浸渍裸或漆包圆铜线 Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-49:1999); German version EN 60317-49:2000
DIN EN 60317-50-2000 特种绕组线规范.第50部分:温度指数200的玻璃纤维绕包树脂或漆浸渍裸或漆包圆铜线 Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999); German version EN 60317-50:2000
DIN EN 60371-3-4-2007 云母基绝缘材料规范.第3部分:各型材料规范.第4节:用B级环氧树脂粘合剂粘结的聚酯薄膜衬底云母纸(IEC 60371- Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder (IEC 60371-3-4:1992 + A1:2006); German version EN 60371-3-4:1995 + A1:2006
DIN EN 60371-3-5 Berichtigung 1-2007 以云母为基材的绝缘材料.第5部分:单项材料规范.活页5:后浸渍用环氧树脂粘合玻璃布云母纸 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:2005); German version EN 60371-3-5:2006, Corrigenda to DIN EN 60371-3-5 (VDE 0332-3-5):2006-08; CENELEC-Corrigendum November 2006 to EN 60371-3-5:2006
DIN EN 60371-3-5-2006 以云母为基材的绝缘材料.第3部分:单项材料规范.活页5:后浸渍用玻璃布补强环氧树脂粘合云母纸 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:2005); German version EN 60371-3-5:2006
DIN EN 60371-3-6-2007 云母基绝缘材料规范.第3部分:各型材料规范.第6节:用B级环氧树脂粘合剂粘结的玻璃衬底云母纸(IEC 60371-3-6: Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder (IEC 60371-3-6:1992 + A1:2006); German version EN 60371-3-6:1995 + A1:2006
DIN EN 60371-3-7-2007 云母基绝缘材料规范.第3部分:各型材料规范.第7节:单导体胶带用带有环氧树脂粘合剂的聚脂薄膜云母纸(IEC 603 Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping (IEC 60371-3-7:1995 + A1:2006); German version EN 60371-3-7:1995 + A1:2006
DIN EN 60455-1-1999 电器绝缘用以反应性化合物为基的树脂.第1部分:定义和一般要求 Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements (IEC 60455-1:1998); German version EN 60455-1:1998
DIN EN 60455-2-2000 电器绝缘用树脂基反应化合物.第2部分:试验方法 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test (IEC 60455-2:1998); German version EN 60455-2:1999
DIN EN 60455-3-1-2004 电绝缘用树脂基反应性复合物.第3部分:单项材料规范.活页1:未填充环氧树脂复合物 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Unfilled epoxy resinous compounds (IEC 60455-3-1:2003); German version EN 60455-3-1:2003
DIN EN 60455-3-2-2004 电气绝缘用树脂基反应性复合物.第3部分:单项材料规范.活页2:填石英的环氧树脂复合物 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 2: Quartz filled epoxy resinous compounds (IEC 60455-3-2:2003); German version EN 60455-3-2:2003
DIN EN 60455-3-3-2004 电气绝缘用树脂基反应性复合物.第3部分:单项材料规范.活页3:未加填料的聚氨酯复合物 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 3: Unfilled polyurethane compounds (IEC 60455-3-3:2003); German version EN 60455-3-3:2003
DIN EN 60455-3-4-2004 电绝缘用树脂基反应性复合物.第3部分:单项材料规范.活页4:加填料的聚氨酯复合物 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 4: Filled polyurethane compounds (IEC 60455-3-4:2003); German version EN 60455-3-4:2003
DIN EN 60455-3-5-2006 电工绝缘用树脂基反应性化合物.第3部分:专用材料规范:第5页:不饱和聚酯基浸渍树脂(IEC 60455-3-5:2006) Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins (IEC 60455-3-5:2006); German version EN 60455-3-5:2006
DIN EN 60893-1-2004 绝缘材料.电工用热固性树脂工业硬质层压片.第1部分:定义、名称和一般要求 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 60893-1:2004); German version EN 60893-1:2004
DIN EN 60893-2-2005 绝缘材料.电工用热固性树脂工业硬质层压片.第2部分:试验方法 Insulating materials - Industrial laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 60893-2:2003); German version EN 60893-2:2004
DIN EN 60893-3-1 Bb.1-1996 电工用热固性树脂基工业刚性层压板规范.类型比较 Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Comparison of types
DIN EN 60893-3-1-2004 绝缘材料.电工用热固性树脂工业硬质层压片.第3-1部分:专用材料规范.对工业硬质层压片类型的要求 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Requirements for types of industrial rigid laminated sheets (IEC 60893-3-1:2003); German version EN 60893-3-1:2004
DIN EN 60893-3-2-2004 绝缘材料.电工用热固性树脂工业硬质层压片.第3-2部分:专用材料规范.对环氧树脂硬质层压片的要求 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2: Specifications for individual materials - Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003); German version EN 60893-3-2:2004
DIN EN 60893-3-3-2004 绝缘材料.电工用热固性树脂工业硬质层压片.第3-3部分:专用材料规范.对三聚氰胺树脂硬质层压片的要求 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3: Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003); German version EN 60893-3-3:2004
DIN EN 60893-3-4-2004 绝缘材料.电工用热固性树脂工业硬质层压片.第3-4部分:专用材料规范.对酚醛树脂硬质层压片的要求 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4: Specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:2003); German version EN 60893-3-4:2004
DIN EN 60893-3-5-2004 绝缘材料.电工用热固性树脂工业硬质层压片.第3-5部分:专用材料规范.对聚酯树脂硬质层压片的要求 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-5: Specifications for individual materials - Requirements for rigid laminated sheets based on polyester resins (IEC 60893-3-5:2003); German version EN 60893-3-5:2004
DIN EN 60893-3-6-2004 绝缘材料.电工用热固性树脂工业硬质层压片.第3-6部分:专用材料规范.对硅树脂硬质层压片的要求 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003); German version EN 60893-3-6:2004
DIN EN 60893-3-7-2004 绝缘材料.电工用热固性树脂工业硬质层压片.第3-7部分:专用材料规范.对聚酰亚胺树脂基硬质层压片的要求 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-7: Specifications for individual materials - Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003); German version EN 60893-3-7:2004
DIN EN 61212-1-2007 基于热固树脂的电气用工业刚性圆形层压管和棒材.第1部分:定义、名称和一般要求 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 61212-1:2006); German version EN 61212-1:2006
DIN EN 61212-2-2007 绝缘材料.电工用基于热固树脂的工业型刚性层压圆管和棒材.第2部分:试验方法(IEC 61212-2-2006) Insulating Materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 61212-2:2006); German version EN 61212-2:2006
DIN EN 61212-3-1-2007 绝缘材料.基于热固树脂的电气用工业刚性圆形层压管和棒材.第3部分:单项材料规范.活页1:圆形层压液压管(IEC Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes (IEC 61212-3-1:2006); German version EN 61212-3-1:2006
DIN EN 61212-3-3-2007 绝缘材料.电工用工业刚性热固树脂层压管和棒材.第3部分:各型材料规范.第3节:圆型模压棒(IEC 61212-3-3:2006 Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods (IEC 61212-3-3:2006); German version EN 61212-3-3:2006
DIN EN 61249-2-10-2004 印制板和其它互连结构用材料.第2-10部分:包被和非包被增强基材.规定了易燃性的包铜的改良或未改良的氰酸酯 Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-10:2003); German version EN 61249-2-10:2003
DIN EN 61249-2-12-1999 印制板和其它互连结构用材料.第2-12部分:涂覆或未涂覆增强基材分规范集.规定可燃性的铜包被环氧树脂非编织 Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad; epoxide non-woven aramid laminate of defined flammability, copper-clad (IEC 61249-2-12:1999); German version EN 61249-2-12:1999
DIN EN 61249-2-8-2004 印制板和其它互连结构用材料.第2-8部分:包被和非包被增强基材.规定了易燃性的包铜的改良溴化环氧树脂编织玻 Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-8:2003); German version EN 61249-2-8:2003
DIN EN 61249-2-9-2004 印制板和其它互连结构用材料.第2-9部分:包被和非包被增强基材.规定了易燃性的包铜的二顺丁烯二酰亚胺/三嗪 Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-9:2003); German version EN 61249-2-9:2003
DIN EN 62011-1-2003 绝缘材料.电气设备用工业刚性模制矩形和六边形横截面热固性树脂基层压管材和杆材.第1部分:定义、命名及一般 Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1: Definitions, designations and general requirements (IEC 62011-1:2002); German version EN 62011-1:2002
DIN EN 62011-2-2004 绝缘材料.电气用途工业刚性模制矩形和六边形横截面的热固性树脂基层压管材和杆材.第2部分:试验方法 Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test (IEC 62011-2:2004); German version EN 62011-2:2004
DIN EN 62011-3-1-2004 绝缘材料.电工用热固性树脂基矩形和六边形横截面的工业刚性模制层压管材和杆材.第3-1部分:单项材料规范.矩 Insulating materials - Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 3-1: Specifications for individual materials - Tubes and rods of rectangular and hexagonal cross-section (IEC 62011-3-1:2003); German version EN 62011-3-1:2003
DIN EN ISO 10082-2000 塑料.酚醛树脂.分类和试验方法 Plastics - Phenolic resins - Classification and test methods (ISO 10082:1999); German version EN ISO 10082:1999
DIN EN ISO 10283-2007 涂料和清漆用粘合剂.异氰酸酯树脂中二异氰酸酯单体的测定 Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate resins (ISO 10283:2007); German version EN ISO 10283:2007
DIN EN ISO 1060-1-2000 塑料.氯乙烯的均聚物和共聚物树脂.第1部分:命名体系和规范基础 Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: Designation system and basis for specifications (ISO 1060-1:1998); German version EN ISO 1060-1:1999
DIN EN ISO 1060-2-2000 塑料.氯乙烯的均聚物和共聚物树脂.第2部分:试验样品的制备和性能的测定 Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 1060-2:1998); German version EN ISO 1060-2:1999
DIN EN ISO 10618-2004 碳纤维.树脂浸渍纱拉伸性能的测定 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004); German version EN ISO 10618:2004
DIN EN ISO 11401-1998 塑料.酚醛树脂.用液相色谱法分离 Plastics - Phenolic resins - Separation by liquid chromatography (ISO 11401:1993); German version EN ISO 11401:1998
DIN EN ISO 11402 Berichtigung 1-2006 酚醛树脂、氨基树脂和缩合树脂.游离甲醛含量的测定 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version EN ISO 11402:2005, Corrigenda to DIN EN ISO 11402:2005-09; German version EN ISO 11402:2005/AC:2006
DIN EN ISO 11402-2005 酚醛树脂、氨基树脂和缩合树脂.游离甲醛含量的测定 Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004); German version of EN ISO 11402:2005
DIN EN ISO 11409-1998 塑料.酚醛树脂.用差示扫描量热法测定反应热和温度 Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998
DIN EN ISO 11667-1999 纤维增强塑料.模塑化合物和聚酯胶片.树脂、增强纤维和矿物填料含量的测定.溶解方法 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999
DIN EN ISO 11668-2001 涂料和清漆用粘粘剂.氯化聚合树脂.通用试验方法 Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test (ISO 11668:1997); German version EN ISO 11668:2001
DIN EN ISO 11908-1998 油漆和清漆用粘合剂.胺树脂.一般试验法 Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996); German version EN ISO 11908:1998
DIN EN ISO 11909-2007 涂料和清漆用粘合剂.聚亚安酯树脂.通用试验方法 Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007); German version EN ISO 11909:2007
DIN EN ISO 12215-1-2001 小型船舶.船体建造和草图.第1部分:材料.玻璃纤维增强热固树脂标准层压板 Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); German version EN ISO 12215-1:2000
DIN EN ISO 1264-1997 塑料.氯乙烯的均聚物和共聚物树脂.水萃物的pH值测定 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract (ISO 1264:1980); German version EN ISO 1264:1997
DIN EN ISO 1265-2007 塑料.聚氯乙烯树脂.杂质和杂质粒子数量的测定 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007); German version EN ISO 1265:2007
DIN EN ISO 1269-2007 塑料.氯乙烯均聚物和共聚物树脂.挥发性物质(包括水)的测定 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) (ISO 1269:2006); English version of DIN EN ISO 1269:2007-02
DIN EN ISO 15252-1-2000 塑料.环氧树脂模塑化合物(EP-PMCs).第1部分:命名系统和基本规范 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999
DIN EN ISO 15252-2-2000 塑料.环氧树脂粉末模塑化合物(EP-PMCs).第2部分:试样的制备和特性的测定 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999
DIN EN ISO 15252-3-2000 塑料.环氧树脂粉末模塑化合物(EP-PMCs).第3部分:对所选模塑化合物的要求 Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999
DIN EN ISO 1624-2002 塑料制品.氯乙烯均聚物和共聚物树脂.水滤筛析 (ISO 1624:2001); 德文版本 EN ISO 1624:2001 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water (ISO 1624:2001); German version EN ISO 1624:2001
DIN EN ISO 1628-2-1999 塑料.用毛细管粘度计测定稀释溶液中聚合物的粘度.第2部分:聚氯乙烯树脂 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscosimeters - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:1998); German version EN ISO 1628-2:1998
DIN EN ISO 1675-1998 塑料.液态树脂.用比重计法测定浓度 Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985); German version EN ISO 1675:1998
DIN EN ISO 2114 Berichtigung 1-2006 塑料制品(聚脂树脂)、涂料和清漆(粘合剂).部分酸值和总酸值的测定(ISO 2114:2000) Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000, Corrigenda to DIN EN ISO 2114:2002-06; German version EN ISO 2114:2000/AC:2005
DIN EN ISO 2114-2002 塑料制品(聚酯树脂)和涂料清漆(粘合剂).局部和全部酸值的测定 (ISO 2114:2000); 德文版本 EN ISO 2114:2000 Plastics (polyester resins) and paints varnishes (binders) - Determination of partial acid value and total acid value (ISO 2114:2000); German version EN ISO 2114:2000
DIN EN ISO 21627-1-2004 塑料.环氧树脂.氯含量的测定.第1部分:无机氯 Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2002); German version EN ISO 21627-1:2003
DIN EN ISO 21627-2-2004 塑料.环氧树脂.氯含量的测定.第2部分:易皂化的氯 Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2002); German version EN ISO 21627-2:2003
DIN EN ISO 21627-3-2004 塑料.环氧树脂.氯含量的测定.第3部分:总氯量 Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2002); German version EN ISO 21627-3:2003
DIN EN ISO 2535-2003 塑料.不饱和聚酯树脂.室温胶凝时间测量 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002
DIN EN ISO 2554-1998 塑料.不饱和聚酯树脂.羟基值的测定 Plastics - Unsaturated polyester resins - Determination of hydroxyl value (ISO 2554:1997); German version EN ISO 2554:1998
DIN EN ISO 2555-2000 塑料.液态或乳态或分散状的树脂.用布洛克非尔德试验测定表面粘度 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method (ISO 2555:1989); German version EN ISO 2555:1999
DIN EN ISO 308-1998 塑料.酚醛树脂模塑材料.丙酮可溶物质的测定(未模塑材料的表面树脂含量) Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
DIN EN ISO 3219-1994 塑料制品.液态或乳液或漂移的聚合物/树脂.使用规定剪切率的旋转式粘度计测定粘度 (ISO 3219:1993); 德文版 Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993); German version EN ISO 3219:1994
DIN EN ISO 3521-1999 塑料.不饱和聚酯和环氧树脂.体积的总收缩量的测定 Plastics - Unsaturated polyester and epoxy resins - Determination of overall volume shrinkage (ISO 3521:1997); German version EN ISO 3521:1999
DIN EN ISO 3672-1-2002 塑料制品.不饱和的聚酯树脂.第1部分:标识体系 (ISO 3672-1:2000); 德文版本 EN ISO 3672-1:2001 Plastics - Unsaturated-polyester resins (UP-R) - Part 1: Designation system (ISO 3672-1:2000); German version EN ISO 3672-1:2001
DIN EN ISO 3672-2-2002 塑料制品.不饱和的聚酯树脂.第2部分:试样制备和性能测定 (ISO 3672-2:2000); 德文版本 EN ISO 3672-2:2001 Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001
DIN EN ISO 3673-1-1999 塑料.环氧树脂.第1部分:命名 Plastics - Epoxy resins - Part 1: Designation (ISO 3673-1:1996); German version EN ISO 3673-1:1999
DIN EN ISO 3673-2-2000 塑料.环氧树脂.第2部分:试验样品的制备和特性的测定 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999
DIN EN ISO 4597-1-1998 塑料.环氧树脂的固化剂和促进剂.第1部分:命名 Plastics - Hardeners and accelerators for epoxide resins - Part 1: Designation (ISO 4597-1:1983); German version EN ISO 4597-1:1997
DIN EN ISO 4608-1998 塑料.一般用途的氯乙烯均聚物和共聚物树脂.室温下增塑剂吸收性的测定 Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperature (ISO 4608:1998); German version EN ISO 4608:1998
DIN EN ISO 4610-2002 塑料制品.氯乙烯均聚物和共聚物树脂.使用气喷式筛滤器械的筛选分析 (ISO 4610:2001); 德文版本 EN ISO 4610 Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus (ISO 4610:2001); German version EN ISO 4610:2001
DIN EN ISO 4615-2000 塑料.不饱和聚酯和环氧树脂.氯总含量的测定 Plastics - Unsaturated polyesters and epoxide resins - Determination of total chlorine content (ISO 4615:1979); German version EN ISO 4615:1999
DIN EN ISO 4895-1999 塑料.液态环氧树脂.结晶趋向的测定 Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:1997); German version EN ISO 4895:1999
DIN EN ISO 584-1998 塑料.未饱和的聚酯树脂.80℃时反应性的测定(常规方法) Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982); German version EN ISO 584:1997
DIN EN ISO 6401-2005 塑料.氯乙烯均聚物和共聚物树脂.剩余氯乙烯单体的测定.气相色谱法 Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method (ISO 6401:1985); German version EN ISO 6401:2004
DIN EN ISO 6744-1-2004 色漆和清漆用粘合剂.醇酸树脂.第1部分:通用试验方法 Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999); German version EN ISO 6744-1:2004
DIN EN ISO 6744-2-2004 色漆和清漆用粘合剂.醇酸树脂.第2部分:邻苯二甲酸酐含量的测定 Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999); German version EN ISO 6744-2:2004
DIN EN ISO 6744-3-2004 色漆和清漆用粘合剂.醇酸树脂.第3部分:非皂化物含量的测定 Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999); German version EN ISO 6744-3:2004
DIN EN ISO 6744-4-2004 色漆和清漆用粘合剂.醇酸树脂.第4部分:脂肪酸含量的测定 Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999); German version EN ISO 6744-4:2004
DIN EN ISO 6874-2005 牙科学.树脂基窝沟和裂纹封闭剂 Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2005); German version EN ISO 6874:2005
DIN EN ISO 7142-2007 涂料和清漆用粘合剂.环氧树脂.通用试验方法 Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007); German version EN ISO 7142:2007
DIN EN ISO 7327-1997 塑料.环氧树脂固化剂和催化剂.酸酐中游离酸测定 Plastics - Hardeners and accelerators for epoxide resins - Determination of free acid in acid anhydride (ISO 7327:1994); German version EN ISO 7327:1997
DIN EN ISO 8619-2005 塑料.酚醛树脂粉.在加热玻璃板上流动距离的测定 Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:2003); German version EN ISO 8619:2004
DIN EN ISO 8974-2002 塑料制品.酚醛树脂.采用气相色谱法对残余酚含量的测定 (ISO 8974:2002); 德文版本 EN ISO 8974:2002 Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography (ISO 8974:2002); German version EN ISO 8974:2002
DIN EN ISO 8987-2005 塑料.酚醛树脂.在B转变试验板上的活化性能的测定 Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005); German version EN ISO 8987:2005
DIN EN ISO 8988-2006 塑料.酚醛树脂.六亚甲基四胺含量测定.基耶达斯法、高氯酸法和氯化氢酸法(ISO 8988-2006) Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method, perchloric acid method and hydrochloric acid method (ISO 8988:2006); English version of DIN EN ISO 8988:2006-11
DIN EN ISO 8989-1998 塑料.酚醛树脂.水溶物的测定 Plastics - Phenolic resins - Determination of water miscibility (ISO 8989:1995); German version EN ISO 8989:1998
DIN EN ISO 9396-2001 塑料.酚醛树脂.用自动装置在规定条件下对酚醛树脂胶凝时间的测定 Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000
DIN EN ISO 9771-1997 塑料.酚醛树脂.酸性条件处理时液体酚醛树脂假绝热温升测定 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997
DIN ISO 8975-1992 塑料.酚醛树脂.pH值的测定 Plastics; phenolic resins; determination of pH; identical with ISO 8975:1989
DIN ISO 9944-1992 塑料.酚醛树脂.树脂萃取物电导率的测定 Plastics; phenolic resins; determination of electrical conductivity of resin extracts; identical with ISO 9944:1990
DIN VDE 0250-502-1985 电力设施用电缆、电线和绝缘导线.耐热硅树脂灯头接线 Cables, wires and flexible cords for power installation; heat-resistant silicone wire
DIN VDE 0278-629-2-2007 额定电压范围为3.6/6(7.2)kV~20.8/36(42)kV的电力电缆用配件的试验要求.第2部分:树脂浸渍纸绝缘电缆 Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV - Part 2: Cables with impregnated paper insulation; German version HD 629.2 S2:2006
DIN VDE 0278-631-1-1999 材料特性.第1部分;电缆附件中用的混合料.固化前和固化状态下的树脂状混合料 Material characterisation - Part 1: Compounds for use in cable accessories: Resinous compounds before cure and in the cured state; German version HD 631.1.S1:1998
DIN VDE 0291-2-1979 电缆附件用的化合物.在固化前和固化状态时的浇注树脂化合物 Compounds for use in cable accessories; casting resinous compounds before cure and in the cured state VDE Specification
编号 中文名称 英文名称

返回