法国树脂标准(NF resin standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
NF A05-202-1977 离子交换树脂分离法.树脂类型、芯杆的制造和使用 (APPLICATION OF SEPARATIONS ON ION-EXCHANGE RESINES. RESIN TYPES,COLUMN MAKING AND UTILISATION.)
NF A21-106-1979 铬矿石的化学分析.铅的测定.离子交换树脂分离后的原子吸收光谱法 (CHEMICAL ANALYSIS OF CHROMIUM ORES. DETERMINATION OF LEAD . ATOMIC ABSORPTION SPECTROMETRIC METHOD AFTER SEPARATION ON ION-EXCHANGE RESIN.)
NF A47-251-4-2002 钢丝绳接线端.安全.第4部分:金属和树脂套接 (Terminations for steel wire ropes - Safety - Part 4 : metal and resin socketing.)
NF A49-706-1988 钢管.环氧树脂外涂层.应用.检验和试验 (STEEL TUBES. EPOXY RESIN POWDER EXTERNAL COATING. APPLICATION. INSPECTION AND TEST.)
NF A49-707-1992 钢管.环氧树脂粉末内表面涂敷层.涂敷.检查和试验 (STEEL TUBES. EPOXY RESIN POWDER INTERNAL COATING. APPLICATION. INSPECTION AND TESTING.)
NF A49-708-1-2002 近岸和海上管线用钢管和配件.环氧树脂及环氧树脂改良外涂层 (Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings.)
NF A49-712-1993 钢管.带二层环氧树脂聚丙烯涂层的外包履层.用挤压法涂施 (STEEL TUBES. EXTERNAL COATING WITH TWO RESIN EPOXY-POLYPROPYLENE LAYER COATING. APPLICATION BY EXTRUSION.)
NF A49-713-1993 钢管.带有环氧树脂及聚酰胺基涂层的外部和/或内部双层覆层 (STEEL TUBES. EXTERNAL AND/OR INTERNAL TWO LAYERS COATING WITH EPOXY RESIN AND POLYAMIDE BASED COATING.)
NF A49-714-1997 钢管.带有酚醛树脂或环氧树脂及聚酰胺基涂层的内部双层覆层 (STEEL TUBES. INTERNAL TWO LAYERS COATING WITH PHENOL RESIN OR EPOXY RESIN AND POLYAMIDE BASED COATING.)
NF B51-282-1992 蜜胺树脂饰面的木屑板.耐磨性的测定 (MELAMINE FACED PARTICLEBOARDS. DETERMINATION OF RESISTANCE TO ABRASION.)
NF C26-011-1-2003 绝缘材料.电工用工业刚性模制矩形和六边形横截面的热固性树脂基层压管材和棒材.第1部分:定义、名称与符号和 (Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes - Part 1 : definitions, des)
NF C26-113-4-1995 云母基绝缘材料规范.第3部分:单项材料规范.第4活页:用B级环氧树脂粘合剂粘结的聚酯薄膜衬底云母纸 (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 4 : polyester film-backed mica paper with a B-stage epoxy resin binder.)
NF C26-113-5-1995 云母基绝缘材料规范.第3部分:单项材料规范.第5活页:用环氧树脂粘合剂粘结的待浸渍处理的玻璃纤维织物衬底云 (Specification for insulating materials based on mica. Part 3 : specificatins for individual materials. Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (vpi).)
NF C26-113-6-1995 云母基绝缘材料规范.第3部分:单项材料规范.第6活页:用B级环氧树脂粘合剂粘结的玻璃纤维织物衬底云母纸 (Specification for insulating materials based on mica. Part 3 : specifications for individual materials. Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder.)
NF C26-113-7-1996 云母基绝缘材料规范.第3部分:单项材料规范.第7活页:单导体胶带用带环氧树脂粘结剂的聚酯薄膜云母纸 (Insulating materials based on mica. Part 3 : specification of individual materials. Sheet 7 : polyester film mica paper with an expoxy resin binder for single conductor taping.)
NF C26-148-6-1998 电气用压力敏感粘接带.第3部分:个体材料规范.第6节:带丙烯酸树脂热塑粘接的多聚碳膜 (Pressure-sensitive adhesive tapes for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : polycarbonate film tapes with acrylic thermoplastic adhesive.)
NF C26-161-1999 电绝缘用树脂基活性化合物.第1部分:定义和一般要求(EN 60455-1) (Resin based reactive compounds used for electrical insulation. Part 1 : definitions and general requirements.)
NF C26-162-1999 电绝缘用的树脂类化合物.第2部分:试验方法 (Resin based reactive compounds used for electrical insulation. Part 2 : methods of test.)
NF C26-163-1-2003 电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第1活页:未加填料的环氧树脂化合物 (Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : unfilled epoxy resinous compounds.)
NF C26-163-11-1993 电气绝缘用无溶剂可聚合树脂化合物规范.第3部分:单项材料规范.第11活页:环氧树脂基粉末涂料 (Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 11 : epoxy resin-based coating powders.)
NF C26-163-2-2003 电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第2活页:石英填充的环氧树脂化合物 (Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 2 : quartz filled epoxy resinous compounds.)
NF C26-163-3-2003 电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第3活页:未加填料的聚氨酯化合物 (Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 3 : unfilled polyurethane compounds.)
NF C26-163-4-2003 电气绝缘用树脂基反应性化合物.第3部分:单项材料规范.第4活页:加填料的聚氨酯化合物 (Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 4 : filled polyurethane compounds.)
NF C26-163-5-1993 电气绝缘用无溶剂可聚合树脂化合物规范.第3部分:单项材料规范.第5活页:不饱和聚酯填充性树脂 (Specification for solventless polymerisable resinous compouds used for electrical insulation. Part 3 : specifications for individual materials. Sheet 5 : unsaturated polyester impregnating resins.)
NF C26-167-1996 电气用基于热固性树脂的工业硬质圆形层压管和棒材.第2部分:试验方法 (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 2 : methods of test.)
NF C26-168-1-1995 电工用工业刚性圆热固树脂层压管和棒材-第3部分:专用材料规范-活页1:圆层压轧制管 (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for indivudual materials. Sheet 1 : round laminated rolled tubes.)
NF C26-168-2-1995 电工用工业刚性圆热固树脂层压管和棒材-第3部分:专用材料规范-活页2:圆层压压制管 (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : round laminated moulded tubes.)
NF C26-168-3-1995 电工用工业刚性圆热固树脂层压管和棒材-第3部分:专用材料规范-活页3:圆层压压制杆 (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : round laminated moulded rods.)
NF C26-181-1994 以热固性树脂为基的电工用工业刚性层压板规范.第1部分:定义、标记和一般要求 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 1 : definitions, designations and general requirements.)
NF C26-182-1994 电气用基于热固性树脂的工业硬质层压板材规范.第2部分:试验方法 (Specification for industrial rigide laminated sheets based on thermosetting resins for electrical purposes. Part 2 : methods of test.)
NF C26-183-1-1994 电工用热固性树脂基工业刚性层压板规范.第3部分:单项材料规范.第1篇:工业刚性层压板的型号 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 1 : types of industrial rigid laminated sheets.)
NF C26-183-2-1995 电工用热固性树脂基工业刚性层压板规范.第3部分:单项材料规范.第2篇:环氧树脂基刚性层压板的要求 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminated sheets based on epoxyde resins.)
NF C26-183-2/A1-2000 电气工业用热固性树脂基的刚性层压薄板规范.第3部分:单项材料规范.第2节:环氧树脂基的刚性层压薄板要求 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for rigid laminate)
NF C26-183-3-1995 电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第3活页:密胺树脂基刚性层压板的要求 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 3 : requirements for rigid laminated sheets based on melamine resins.)
NF C26-183-4-1995 电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第4活页:酚醛树脂基刚性层压板的要求 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 4 : requirements for rigid laminated sheets based on phenolic resins.)
NF C26-183-5-1995 电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第5活页:聚酯树脂基刚性压板的要求 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 5 : requirements for rigid laminated sheets based on polyester resins.)
NF C26-183-6-1995 电工用热固性树脂基工业刚性层压板规范.第3部分:各种材料规范.第6活页:硅氧烷树脂基刚性层压板的要求 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 6 : requirements for rigid laminated sheets based on silicone resins.)
NF C26-183-7-1995 电工用热固性树脂基工业刚性层压板规范.第3部分:专用材料规范规范.第7活页:聚酰亚胺树脂基刚性层压板的要求 (Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 3 : specifications for individual materials. Sheet 7 : requirements for rigid laminated sheets based on polyimide resins.)
NF C26-191-1995 电工用工业刚性圆热固树脂层压管和棒材 (Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 1 : general requirements.)
NF C31-004-2000 特种绕组线规范.第0部分:一般要求.第4节:玻璃纤维绕组树脂或清漆浸渍的裸铜线或漆包扁铜线 (Specifications for particular types of winding wires - Part 0 : general requirements - Section 4 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.)
NF C31-004/A1-2001 特种绕组线规范.第0-4部分:一般要求.玻璃纤维绕组树脂或清漆浸渍裸铜线或漆包扁铜线 (Specifications for particular types of winding wires - Part 0-4 : general requirements Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire.)
NF C31-005-2000 特种绕组线规范.第0部分:一般要求.第5节:带玻璃纤维保护层的树脂或清漆浸渍的裸的或漆包扁铜线 (Specifications for particular types of winding wires - Part 0 : general requirements - Section 5 : glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire.)
NF C31-006-2002 特种绕组线规范.第0-6部分:一般要求.玻璃丝绕包树脂或漆浸渍裸或漆包圆铜线 (Specifications for particular types of winding wires - Part 0-6 : general requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire.)
NF C31-681-2000 特种绕组线规范.第31部分:玻璃纤维绕制树脂或清漆浸渍的裸的或漆包扁铜绕组线.温度指数180 (Specifications for particular types of winding wires - Part 31 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180.)
NF C31-682-2000 特种绕组线规范.第32部分:玻璃纤维绕制树脂或清漆浸渍的裸的或漆包扁铜绕组线.温度指数155 (Specifications for particular types of winding wires - Part 32 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155.)
NF C31-683/A1-2000 特种绕组线规范.第33部分:玻璃纤维环绕树脂或清漆浸渍的裸的或漆包扁铜线.温度指数200 (Specifications for particular types of winding wires - Part 33 : glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200.)
NF C31-689/A1-2000 特种绕组线规范.第39部分:玻璃纤维编织的树脂的或清漆浸渍的裸的或漆包扁铜线.温度指数180 (Specifications for particular types of winding wires - Part 39 : Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180.)
NF C31-690/A1-2000 特种绕组线规范.第40部分:玻璃纤维编织的树脂的或清漆浸渍的裸的或漆包扁铜线.温度指数200 (Specifications for particular types of winding wires - Part 40 : Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200.)
NF C31-698-2001 特种绕组线规范.第48部分:玻璃丝绕包树脂或清漆浸渍裸铜线或漆包圆铜线.温度指数155 (Specifications for particular types of winding wires - Part 48 : glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire temperature index 155.)
NF C31-699-2001 特种绕阻线规范.第49部分:玻璃纤维绕阻线树脂或包漆裸露圆铜线温度指数180 (Specifications for particular types of winding wires - Part 49 : glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire temperature index 180.)
NF C31-700-2001 特种绕组线规范.第50部分:玻璃丝绕包树脂或清漆浸渍裸铜线或漆包圆铜线.温度指数200 (Specifications for particular types of windings wires - Part 50 : glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200.)
NF C64-455-1993 金属封闭气体填充的高压开关和控制设备的铸造树脂分隔部分(欧洲标准EN 50089) (Cast resin partitions for metal enclosed gas-filled high voltage switchgear and controlgear.)
NF C93-714-1975 电子元件.印制电路.多层印制电路板用环氧树脂浸润的玻璃纤维织物.一般规定 (Components for electronic equipment. Printed circuits. Woven glass fabric impregnated with expoxid resin for printed boards.)
NF C93-762/A1-2001 印制电路用基材.第2-12部分:规范.多层电路板制作用规定易燃性的薄铜涂覆环氧树脂层压玻璃布板 (Base materials for printed circuits - Part 2-12 : specifications : thin epoxyde wowen glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed)
NF C96-013-6-2-2002 半导体器件的机械标准化.第6-2部分:绘制表面安装半导体器件封装外形图的一般规则.1.5mm、1.27mm和1.00mm 树 (Mechnical standardization of semiconductor devices - Part 6-2 : general rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27)
NF D63-002-1999 成卷墙纸.精制墙纸,墙面用乙烯树脂和塑料墙面饰层规范. (Wallcoverings in roll form. Specification for finished wallpapers, wall vinyls and plastics wallcoverings.)
NF E29-260-1987 工业管道.涂PTFE-FEP-PFA碳氟化树脂的管道构件 (Industrial pipes. Pipe components with PTFE - FEP - PFA fluorocarbon resin.)
NF F19-211-1990 铁路车辆.机车部件鉴定用的醇酸树脂 (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS FOR MARKING PARTS OF ROLLING STOCK.)
NF F19-220-1992 铁路车辆.环氧树脂涂料.涂二层的保护和装饰体系 (RAILWAY ROLLING STOCK. EPOXY RESIN PAINTS. TWO-COAT PROTECTION AND DECORATION SYSTEM.)
NF F19-222-1992 铁路车辆.醇酸树脂涂料.单层保护体系 (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS. MONOCOAT PROTECTION SYSTEM.)
NF F19-223-1992 铁路车辆.环氧树脂漆.应力条件下防腐保护装置 (RAILWAY ROLLING STOCK. EPOXY RESIN PAINTS. PROTECTION SYSTEM TO PREVENT THE CORROSION UNDER STRESS.)
NF F19-283-1990 铁路车辆.二层保护系统用的醇酸树脂漆 (RAILWAY ROLLING STOCK. ALKYD RESIN PAINTS USED TO PROVIDE A TWO-COAT PROTECTION.)
NF F19-477-1991 铁路车辆.聚酯树脂热固性粉末涂料 (RAILWAY ROLLING STOCK. THERMO SETTING POWDER PAINTS MADE OF POLYESTER RESINS.)
NF F19-478-1989 铁路车辆.热固性环氧树脂漆粉 (ROLLING STOCK. THERMO SETTING POWDER PAINTS MADE OF EPOXY RESINS.)
NF F31-447-1989 铁路车辆.表面用热固性树脂装潢的胶合板 (ROLLING STOCK. LAMINATED PANELS WITH DECORATED SURFACE,MADE OF THERMOSETTING RESINS.)
NF J95-046-1-2001 小型飞行器.壳的构造和建材尺寸.第1部分:材料.玻璃纤维增强参考层压热固树脂 (Small craft - Hull construction and scantlings - Part 1 : materials : thermosetting resins, glass-fibre reinforcement, reference laminate.)
NF L17-021-1998 航空航天系列.非金属材料.树脂,粘接剂,增强塑料,预浸渍.用液相色谱测定特性 (AEROSPACE SERIES. NON-METALLIC MATERIALS. RESINS, ADHESIVES, REINFORCED PLASTICS, PREIMPREGNATES. CHARACTERISATION BY LIQUID CHROMATOGRAPHY.)
NF L17-250-3-1996 航空和航天.硅树脂橡胶(VMQ).硬度:60 IRHD (Aerospace series. Silicone rubber (vmq). Hardness 60 irhd.)
NF L17-250-4-1996 航空和航天.硅树脂橡胶(VMQ).硬度:70 IRHD (Aerospace series. Silicone rubber (vmq). Hardness 70 irhd.)
NF L17-413-1998 航空航天系列.碳素纤维层压材料.纤维.树脂和空隙量的测定 (AEROSPACE SERIES. CARBON FIBRE LAMINATES. DETERMINATION OF THE FIBRE, RESIN AND VOID CONTENTS. (EUROPEAN STANDARD EN 2564).)
NF L17-422-1997 航天航空系列.碳纤维增强保混剂.树脂、纤维含量和每单位面积纤维质量的测定(欧洲标准EN 2559) (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN AND FIBRE CONTENT AND THE MASS OF FIBRE PER UNIT AREA. (EUROPEAN STANDARD EN 2559).)
NF L17-451-1988 航空和航天.热固性树脂预浸材料.差示热切析.试验方法 (Aerospace. Fabrics pre-impregnated with thermosetting resin. Differential scanning calorimetry. Test method.)
NF L17-452-1988 航空和航天.热固性树脂预浸织物.耐垂直拉伸强度试验 (Aerospace. Fabric pre-impregnated with thermosetting resin. Perpendicular tensile resistance test.)
NF L17-454-1998 航空航天系列.预浸渍碳素纤维.树脂流测定 (AEROSPACE SERIES. CARBON FIBRE PREIMPREGNATES. DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2560).)
NF L17-455-1988 航空和航天.热固性树脂预浸合成材料.耐剥离强度试验 (Aerospace. Thermosetting resins, prepreg based composite materials. Peel strength.)
NF L17-702-1992 航空航天系列.树脂预浸渍材料.生产批抽样程序 (AEROSPACE SERIES. RESIN PREIMPREGNATED MATERIALS. PRODUCTION BATCH SAMPLING PROCEDURE. (EUROPEAN STANDARD EN 2375).)
NF L17-723-1993 航空航天系列.纺织玻璃纤维预浸渍.测定树脂和橡胶含量及单位面积纤维质量的试验方法 (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN AND FIBRE CONTENT AND MASS OF FIBRE PER UNIT AREA. (EUROPEAN STANDARD EN 2331).)
NF L17-724-1993 航空航天系列.纺织玻璃纤维预浸渍.测定树脂流的试验方法 (AEROSPACE SERIES. TEXTILE GLASS FIBRE PREIMPREGNATES. TEST METHOD FOR THE DETERMINATION OF THE RESIN FLOW. (EUROPEAN STANDARD EN 2332).)
NF L19-031-1993 航空航天系列.管状单元,六角形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIAL WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.)
NF L19-032-1993 航空航天系列.管状单元,矩形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.)
NF L19-033-1993 航空航天系列.管状单元,挠性,玻璃纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.)
NF L19-034-1992 航空航天系列.蜂窝状材料.六方管腔.聚酰胺芳族纸,酚醛树脂浸渍的.标准产品 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.)
NF L19-035-1993 航空航天系列.管状单元、矩形、聚酰胺芳族纸和酚醛树脂浸渍的蜂窝型材料.产品标准 (AREOSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.)
NF L19-036-1993 航空航天系列.管状单元、挠性、聚酰胺芳族纸和酚醛树脂浸渍的蜂窝型材料.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, FLEXIBLE, POLYAMIDE AROMATIC PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.)
NF L19-037-1993 航空航天系列.管状单元,六角形,碳纤维,酚醛树脂浸渍的蜂窝状材料.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL CARBON FABRIC, PHENOLIC RESIN IMPREGNATED ORIENTED AT PLUS OVER MINUS. PRODUCT STANDARD.)
NF L19-040-1993 航空航天系列.管状单元,六角形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料,正负45度取向.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.)
NF L19-041-1993 航空航天系列.管状单元,矩形,玻璃纤维,酚醛树脂浸渍的蜂窝状材料,正负45度取向.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, RECTANGULAR, FIBRE GLASS, PHENOLIC RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.)
NF L19-043-1993 航空航天系列.管状单元,六角形,牛皮纸,酚醛树脂浸渍的蜂窝状材料.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, KRAFT PAPER, PHENOLIC RESIN IMPREGNATED. PRODUCT STANDARD.)
NF L19-046-1993 航空航天系列.管状单元,六角形,玻璃纤维,聚酰亚胺树脂浸渍的蜂窝状材料,正负45度取向.产品标准 (AEROSPACE SERIES. HONEYCOMB MATERIALS WITH TUBULAR CELLS, HEXAGONAL, FIBRE GLASS, POLYMIMIDE RESIN IMPREGNATED, ORIENTED AT PLUS OVER MINUS 45 DEGREES. PRODUCT STANDARD.)
NF M07-013-1982 液体燃料油.航空燃料的氧化稳定性.电位树脂法 (Liquid fuels and lubricating oils. Oxidation stability of aviation fuels. Potential residue method.)
NF M81-450-1989 煤矿器材.树脂地脚螺栓.规格和试验方法 (MINING EQUIPMENT. RESIN ANCHOR BOLTS. SPECIFICATIONS AND TEST METHODS.)
NF P16-361-3-1997 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第3部分:配件 (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 3 : fittings.)
NF P16-361-5-1997 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第5部分:接头的适用性 (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 5 : fitness for purpose of the joints.)
NF P16-361-6-1997 无压地下排水系统用塑料管道系统.不饱和聚酯树脂(UP)基础上的玻璃增强热固塑料(GRP).第6部分:安装实施规程 (Plastics piping systems for non-pressure drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 6 : practices for installation.)
NF P18-806-1989 水硬性混凝土建筑用的特殊产品.粘结料产品或合成树脂基产品.灰末粒度尺寸的分析 (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. BINDER- OR SINTHETIC RESIN BASED PRODUCTS. PARTICLE SIZE ANALYSIS OF POWDERS.)
NF P18-807-1989 水硬性混凝土建筑用的特殊产品.合成树脂或水凝基制品.+450℃时烧失和+950℃灰份含量 (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN OR HYDRAULIC BINDER BASED PRODUCTS. FIRE LOSS AT + 450 DEGREES CELSIUS AND ASH CONTENT AT + 950 DEGREES CELSIUS.)
NF P18-810-1989 水硬性混凝土建筑用的特殊产品.合成树脂基产品.使用期限的确定 (SPECIAL PRODUCTS FOR HYDRAULIC CONCRETE CONSTRUCTIONS. SYNTHETIC RESIN BASED PRODUCTS. DETERMINATION OF USUAL PRACTICE TIME.)
NF P18-927-1-2000 混凝土结构的保护和修复用产品和系统.试验方法.与环氧树脂有关的重活化功能.第1部分:环氧树脂等同物的测定 (Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1 : determination of epoxy equivalent.)
NF P18-927-2-2000 混凝土结构的保护和修复用产品和系统.试验方法.与环氧树脂有关的重活化功能.第2部分:用总基数对胺功能的测 (Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2 : determination of amine functions using the total basici)
NF P61-609-1997 瓷砖和板块用灰浆和胶粘剂.反应性树脂胶粘剂的抗剪强度的测定 (Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives.)
NF P61-611-1-1999 瓷砖用胶粘剂和灰浆.第1部分:反应性树脂灰浆的耐化学腐蚀性的测定 (Adhesives and grouts for tiles. Part 1: determination of chemical resistance of reaction resin mortars.)
NF P62-301-1996 弹性覆面层.黄麻或聚酯衬乙烯树脂和乙烯树脂衬聚酯基乙烯树脂的规范 (Resilient floor coverings. Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on polyester felt with polyvinyl chloride backing. Specification.)
NF P98-623-1991 路面横标记.路面上使用的标记.聚乙烯树脂软化的分析 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF SLIGHTLY OR NON POLAR PLASTICIZERS OF POLYDIENIC RESINS.)
NF P98-625-1991 路面横标记.道路上使用的标记.用气相色谱法对醇酸树脂的分析 (HORIZONTAL ROAD MARKING. MARKINGS APPLIED ON THE ROADS. ANALYSIS OF ALKYD RESINS BY GAS PHASE CHROMATOGRAPHY.)
NF S91-209-2000 牙科.假牙用树脂 (Dentistry - Denture base polymers.)
NF S91-215-2000 牙科.树脂填充的、可修复的嵌入材料 (Dentistry - Polymer-based filling, restorative and luting materials.)
NF T30-400-2002 涂料和清漆用粘结剂.含氯聚合树脂.通用试验方法 (Binders for paints and varnishes - Chlorinated polymerization resins - General methods of test.)
NF T30-405-1998 涂料和清漆用粘合剂.氨基树脂.试验的一般方法 (Binders for paints and varnishes. Amino resins. General methods of test.)
NF T30-406-1998 涂料和清漆用粘合剂.聚异氰酸盐树脂.试验的一般方法 (Binders for paints and varnishes. Polyisocyanate resins. General methods of test.)
NF T51-013-1969 塑料液状聚氯乙烯树脂粘性指数的常规测定 (PLASTICS. CONVENTIONAL DETERMINATION OF VISCOSITY NUMBER OF PVC RESINS IN SOLUTION.)
NF T51-023-1999 塑料.密胺甲醛树脂模制件.可提取甲醛含量的测定 (Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde.)
NF T51-030-1986 塑料.在沸水中由6型聚酰胺树脂中提取物质的百分比测定 (Plastics. Determination of the percentage of extractable materials by boilling water in polyamide 6 (refractometric method).)
NF T51-032-1976 塑料.浓缩溶液中聚酰胺树脂的粘度比测定 (PLASTICS. DETERMINATION OF VISCOSITY RATIO OF POLYAMIDE RESINS IN CONCENTRATED SOLUTION.)
NF T51-042-1967 塑料.聚氯乙烯树脂.压制产品松散密度的测定 (PLASTICS. PVC RESINS. DETERMINATION OF COMPACTED APPARENT BULK DENSITY.)
NF T51-043-2003 塑料.氯乙烯均聚物和共聚物树脂.水中筛析 (Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis in water.)
NF T51-044-1970 塑料.聚氯乙烯树脂.硫酸灰分的测定 (PLASTICS. PVC RESINS. DETERMINATION OF SULPHATED ASH.)
NF T51-049-1969 塑料.聚酰胺树脂.熔点的测定.毛细管法 (PLASTICS. POLYAMIDE RESINS. DETERMINATION OF MELTING POINT. SO-CALLED CAPILLARY TUBE METHOD.)
NF T51-050-1969 塑料.聚酰胺树脂.“熔点”的测定.凹凸镜法 (PLASTICS. POLYAMIDE RESINS. DETERMINATION OF MELTING POINT. MENISCUS METHOD.)
NF T51-083-1999 塑料.液态或象乳胶或分散体一样的树脂.用布洛克菲文德试验方法测定表面粘度 (Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield test method.)
NF T51-175-1998 塑料.未饱和的聚酯树脂.80℃时的反应性测定(常规方法) (Plastics. Unsaturated polyester resins. Determination of reactivity at 80 degrees celsius (conventional method) . (EUROPEAN standard en iso 584).)
NF T51-177-1998 塑料.环氧树脂的硬化剂和促进剂.第1部分:标识 (Plastics. Hardeners and accelerators for epoxide resins. Part 1 : designation.)
NF T51-201-1998 塑料.液态树脂.比重计法测定比重 (Plastics. Liquid resins. Determination of density by the pyknometer method.)
NF T51-211-1994 塑料.乳浊态或分散态聚合物/树脂.用确定的切变速率梯度旋转粘度计测量粘度 (Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational viscometer with defined shear rate.)
NF T51-301-1998 塑料.酚醛铸模材料.丙酮溶物质的测定(非铸模状态内材料中的大致树脂含量) (Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state).)
NF T51-403-1998 塑料.酚醛树脂.差示扫描量热法测定反应热和温度 (PLASTICS. PHENOLIC RESINS. DETERMINATION OF HEATS AND TEMPERATURES OF REACTION BY DIFFERENTIAL SCANNING CALORIMETRY. (EUROPEAN STANDARD EN ISO 11409).)
NF T51-404-1998 塑料.酚醛树脂.通过液相色谱法的分离 (PLASTICS. PHENOLIC RESINS. SEPARATION BY LIQUID CHROMATOGRAPHY. (EUROPEAN STANDARD EN ISO 11401).)
NF T51-405-1998 塑料.缩合树脂.游离甲醛的测定 (PLASTICS. CONDENSATION RESINS. DETERMINATION OF FREE FORMALDEHYDE. (EUROPEAN STANDARD EN ISO 11402).)
NF T51-421-1998 塑料.酚醛树脂粉.在加热玻璃板上流动距离的测定 (Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate.)
NF T51-422-1995 塑料.酚醛树脂粉.用空气喷射的筛滤器械的筛分析 (Plastics. Phenolic resin powder. Sieve analysis using air-jet sieve apparatus.)
NF T51-423-1998 塑料.液体酚醛树脂.水溶混性的测定 (Plastics. Liquid phenolic resins. Determination of water miscibility.)
NF T51-425-1983 塑料.固态和液态酚树脂.密度的测定 (PLASTICS. LIQUID AND SOLID PHENOLIC RESINS. MEASUREMENT OF DENSITY.)
NF T51-426-1995 塑料.液态酚醛树脂或酚醛树脂溶液粘度的测定 (Plastics. Phenolic resins in the liquid state of in solution. Determination of viscosity.)
NF T51-428-1998 塑料.酚醛树脂.B-变化测试板上反应性能的测定 (Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate.)
NF T51-429-2001 塑料.酚醛树脂.用自动设备测定特殊条件下的胶凝时间 (Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus.)
NF T51-430-1983 塑料.酚树脂.水含量测定.卡尔·费休法 (PLASTICS. PHENOLIC RESINS. DETERMINATION OF WATER CONTENT. KARL FISCHER METHOD.)
NF T51-431-1997 塑料.酚醛树脂.六亚甲基四胺含量的测定.基氏定氮法和高氯酸法(欧洲标准EN ISO 8988) (Plastics. Phenolic resins. Determination of hexamethylenetetramine content. Kjeldahl method and perchloric acid method.)
NF T51-432-1984 塑料.酚树脂.过氯酸法测定HMTA含量 (PLASTICS. PHENOLIC RESINS. DETERMINATION OF HMTA CONTENT BY PERCHLORIC ACID METHOD.)
NF T51-434-1997 塑料.酚醛树脂.游离甲醛含量的测定盐酸胲法(欧洲标准EN ISO 9397) (Plastics. Phenolic resins. Determination of free-formaldehyde content. Hydroxylamine hydrochloride method.)
NF T51-435-1985 塑料.固态酚树脂.毛细管法测定熔化范围 (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF MELTING RANGE BY THE CAPILLARY TUBE METHOD.)
NF T51-436-2002 塑料.酚醛树脂.用气体色谱法测定残余酚的含量 (Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography.)
NF T51-437-1985 塑料.固态酚树脂.软化点的测定.珠环法 (PLASTICS. SOLID PHENOLIC RESINS. DETERMINATION OF SOFTENING POINT. “BALL AND RING“ METHOD.)
NF T51-438-1998 塑料.液态酚醛树脂.非挥发性物质的常规测定 (Plastics. Liquid phenolic resins. Conventional determination of non-volatile matter.)
NF T51-440-2000 塑料.酚醛树脂.分类和试验方法 (Plastics - Phenolic resins - Classification and test methods.)
NF T51-441-1997 塑料.酚醛树脂.测定可溶酚醛树脂在酸性条件下的反应性(欧洲标准EN ISO 9771) (PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS. (EUROPEAN STANDARD EN ISO 9771).)
NF T51-442-1995 塑料.酚醛树脂.树脂萃取物电导率的测定 (PLASTICS. PHENOLIC RESINS. DETERMINATION OF ELECTRICAL CONDUCTIVITY OF RESIN EXTRACTS. (EUROPEAN STANDARD EN ISO 9944).)
NF T51-501-1999 塑料.不饱和聚酯树脂和环氧树脂.体积总收缩率的测定 (Plastics. Unsaturated polyester and epoxy resins. Determination of overall volume shrinkage.)
NF T51-510-1-2002 塑料.不饱和聚酯树脂(UP-R).第1部分:名称与符号系统 (Plastics - Unsaturated-polyester resins (UP-R) - Part 1 : designation system.)
NF T51-510-2-2002 塑料.不饱和聚酯树脂(UP-R).第2部分:试样的制备和性能的测定 (Plastics - Unsaturated-polyester resins (UP-R) - Part 2 : preparation of test specimens and determination of properties.)
NF T51-511-2000 塑料(聚脂树脂)、涂料和清漆(粘合剂).部分酸值和全部酸值的测定 (Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid value.)
NF T51-512-2003 塑料.不饱和聚酯树脂.室温条件下胶凝时间的测量 (Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature.)
NF T51-513-1998 塑料.不饱和聚酯树脂.羟基值的测定 (Plastics. Unsaturated polyester resins. Determination of hydroxyl value.)
NF T51-515-1979 塑料.不饱和非聚合聚酯树脂.挥发物测定 (PLASTICS. UNSATURATED UNPOLYMERIZED POLYESTERS RESINS. DETERMINATION OF VOLATILE MATTER.)
NF T51-519-1999 塑料.不饱和聚酯和环氧树脂.氯总含量的测定 (PLASTICS. UNSATURATED POLYESTERS AND EPOXIDE RESINS. DETERMINATION OF TOTAL CHLORINE CONTENT. (EUROPEAN STANDARD EN ISO 4615).)
NF T51-520-1978 塑料.环氧树脂.名称 (EPOXY RESINS. DESIGNATION.)
NF T51-523-1976 塑料.环氧树脂和缩水甘油酸酯.无机氯的测定.直接滴定法 (PLASTICS. EPOXY RESINS AND GLYCIDIC ESTERS. DETERMINATION OF INORGANIC CHLORINE. DIRECT TITRATION METHOD.)
NF T51-524-1998 塑料.环氧树脂和相关材料.易皂化氯的测定 (Plastics. Epoxy resins and related materials. Determination of easily saponifiable chlorine.)
NF T51-525-1979 塑料.液态或固态未聚合环氧树脂.挥发物质常规含量的测定 (PLASTICS. SOLID OR LIQUID UNPOLYMERIZED EPOXY RESINS. DETERMINATION OF VOLATILE MATTER.)
NF T51-527-1985 塑料.环氧树脂.性能的测定 (PLASTICS. EPOXIES. DETERMINATION OF PROPERTIES.)
NF T51-530-1997 塑料.环氧树脂用硬化剂和促凝剂.酸酐中自由酸的测定(欧洲标准EN ISO 7327) (PLASTICS. HARDENERS AND ACCELERATORS FOR EPOXIDE RESINS. DETERMINATION OF FREE ACID IN ACID ANHYDRIDE. (EUROPEAN STANDARD EN ISO 7327).)
NF T51-701-2002 塑料.氯乙烯均聚物和共聚物树脂.使用喷气式筛滤器械的筛析 (Plastics - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus.)
NF T51-706-1986 塑料.氯乙烯均聚物和共聚物树脂.残余氯乙烯单体测定.气相色谱法 (PLASTICS. HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORID. DETERMINATION OF RESIDUAL VINYL CHLORID MONOMER. GAS CHROMATOGRAPHIC METHOD.)
NF T51-750-1981 塑料.氯乙烯均聚物和共聚物树脂.挥发物质(色拾水)的测定 (Plastics. Homopolymer and copolymer resins of vinyl chloride. Determination of volatile matter (including water).)
NF T51-770-1979 塑料.浆状聚氯乙烯树脂.浆的制备 (PLASTICS. PVC RESINS FOR PASTES. PREPARATION OF A PASTE.)
NF T51-782-1998 塑料.一般应用的聚氯乙烯的均聚物和共聚物树脂.室温下增塑剂吸收的测定 (Plastics. Homopolymer and copolymer resins of vinyl chloride for general use. Determination of plasticizer absorption at room temperature.)
NF T51-783-1978 塑料.一般用聚氯乙烯树脂.加温时增塑剂凝固的测定 (PVC RESINS FOR GENERAL APPLICATIONS ; DETERMINATION OF ABSORPTION OF PLASTICIZER IN THE HOT STATE.)
NF T51-914-2002 塑料.环氧树脂和环氧丙基酯.无机氯的测定 (Plastics - Epoxy resins and glycidyl esters - Determination of inorganic chlorine.)
NF T54-301-1-1991 饰面用高压层压板(HPL).热固性树脂板.第1部分:规格(欧洲标准 EN 438-1) (DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 1 : SPECIFICATIONS. (EUROPEAN STANDARD EN 438-1).)
NF T54-301-2-1991 饰面用高压层压板(HPL).热固性树脂板.第2部分:特性测定.(欧洲标准 EN 438-2) (DECORATIVE HIGH-PRESSURE LAMINATES (HPL). SHEETS BASED ON THERMOSETTING RESINS. PART 2 : DETERMINATION OF PROPERTIES. (EUROPEAN STANDARD EN 438-2).)
NF T54-701-1988 塑料.热固树脂基层压板.规范 (PLASTICS. INDUSTRIAL LAMINATED SHEETS BASED ON THERMOSETTING RESINS. SPECIFICATION.)
NF T57-110-1994 不饱和聚合树脂基增强塑料.残留的苯乙烯单体含量的测定 (Reinforced plastics based on unsaturated polyester resins. Determination of residual styrene monomer content.)
NF T57-151-1978 玻璃织物增强塑料.热固性树脂拉力试件单向增强塑料板的制备 (GLASS TEXTILE REINFORCED PLASTICS. PREPARATION OF SHEETS OF THERMOSETTING RESINS WITH UNIDIRECTIONAL REINFORCEMENT FOR TENSILE TEST SPECIMENS.)
NF T57-153-7-2002 纤维增强塑料.试验板的生产方法.第7部分:树脂压铸法 (Fibre-reinforced plastics - Methods of producing test plates - Part 7 : resin transfer moulding.)
NF T57-160-1-1994 玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第1部分:树脂棒的准备 (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 1 : GENERAL CONSIDERATIONS AND PREPARATION OF RODS.)
NF T57-160-2-1994 玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第2部分:树脂棒柔性强度的测定 (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 2 : DETERMINATION OF FLEXURAL STRENGTH.)
NF T57-160-3-1994 玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第3部分:树脂棒耐压强度的测定 (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 3 : DETERMINATION OF COMPRESSIVE STRENGTH.)
NF T57-160-4-1994 玻璃织物增强塑料.浮法增强树脂棒机械性能的测定.第4部分:树脂棒外观线性分层剪切强度的测定 (TEXTILE-GLASS-REINFORCED PLASTICS. DETERMINATION OF MECHANICAL PROPERTIES ON RODS MADE OF ROVING-REINFORCED RESIN. PART 4 : DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH.)
NF T57-214-1-1998 地下排水系统和压力下污水排放的塑料管道系统.基于不饱和聚酯 树脂(UP)的玻璃增强热固塑料.第1部分:一般性( (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Part 1 : general.)
NF T57-214-3-1996 压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第3部分:配件 (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsaturated polyester resin (up). Part 3 : fittings.)
NF T57-214-5-1996 压力下地下排水系统用塑料管道系统.不饱和聚酯树脂基玻璃增强热固塑料.第5部分:接头的适用性 (Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (grp) based on unsatured polyester resin (up). Part 5: fitness for purpose of the joints.)
NF T57-513-1973 玻璃织物增强塑料.聚酯树脂预浸垫.塑性的测定 (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. PLASTICITY.)
NF T57-514-1973 玻璃织物增强塑料.聚酯树脂预浸垫.可模制性 (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS. PRE-IMPREGNATED MATS BASED ON POLYESTER RESINS. MOULDABILITY.)
NF T57-515-1973 玻璃织物增强塑料.聚酯树脂预浸垫.膨胀性测定 (PRE-IMPREGNATED PRODUCTS BASED ON MATS MADE OF GLASS AND POLYESTER RESINS. MEASUREMENT OF EXPANSION.)
NF T57-555-1973 玻璃织物增强塑料.环氧树脂预浸织物.拉力和剪力方法测定对铜的附着力 (PRE-IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS : DETERMINATION OF ADHESION ON COPPER BY A METHOD INVOLVING SHEARING UNDER TRACTION.)
NF T57-559-1975 玻璃织物增强塑料.环氧树脂预浸玻璃织物.粘合时间 (PLASTICS MATERIALS REINFORCED WITH TEXTILE GLASS - PRE IMPREGNATED GLASS FABRICS BASED ON EPOXY RESINS - BINDING TIME.)
NF T57-608-1999 纤维增强塑料.模压化合物和聚酯胶片.树脂、增强纤维和矿物填料含量的测定.溶解方法 (Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforced-fibre and mineral-filler content. Dissolution methods.)
NF T57-616-2001 复合材料.预浸料坯.树脂流测定 (Composites - Prepregs - Determination of resin flow.)
NF T60-176-1994 暂时防蚀产品.斑痕试验.短期树脂化成叠板材 (TEMPORARY PROTECTION AGAINST CORROSION. STAIN TEST. SHORT-TERM RESINIFICATIONON STACKED PANELS.)
NF T76-151-1992 承重木结构用苯酚树脂系列和氦基塑料系列粘合剂:分类及性能要求 (ADHESIVES, PHENOLIC AND AMINOPLASTIC, FOR LOAD BEARING TIMBER STRUCTURES : CLASSIFICATION AND PERFORMANCE REQUIREMENTS. (EUROPEAN STANDARD EN 301).)
NF T77-101-1985 工业硅树脂.密度的测定 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF DENSITY.)
NF T77-103-1986 工业硅树脂.一定温度下凝胶时间的测定.薄板法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. PLATE METHOD.)
NF T77-105-1985 工业硅树脂.水含量的测定.卡尔.费休法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF WATER CONTENT. KARL FISCHER METHOD.)
NF T77-106-1987 工业硅树脂.粘度、挤压度(流动率)和CASSON粘度的测定.标准挤压喷嘴法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF EXTRUDABILITY (FLUIDITY) AND OF VISCOSITY “CASSON“. METHOD USING STANDARD EXTRUSION NOZZLE.)
NF T77-107-1986 工业硅树脂.一定温度下凝胶时间的测定.往复运动自动仪法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. METHOD USING AUTOMATIC EQUIPMENT WITH ALTERNATE MOTION.)
NF T77-108-1986 工业硅树脂.乳剂.贮存和离心稳定性的测定 (BASIC SILICONES FOR INDUSTRIAL USE. EMULSIONS. DETERMINATION OF STABILITY DURING STORING AND TO CENTRIFUGATION.)
NF T77-109-1986 工业硅树脂.一定温度下凝胶时间的测定.自动转动仪法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF GEL TIME AT A GIVEN TEMPERATURE. METHOD USING AUTOMATIC EQUIPMENT WITH ROTARY MOTION.)
NF T77-110-1986 工业硅树脂.乳剂.稀释后稳定性的测定 (BASIC SILICONES FOR INDUSTRIAL USE. EMULSIONS. DETERMINATION OF STABILITY AFTER DILUTION.)
NF T77-111-1988 工业硅树脂.闪点的测定 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF FLASH POINTS.)
NF T77-112-1988 工业硅树脂.泡沫抑制使用的测定.拍打法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF ANTI-FOAMING POWER. BEATING METHOD.)
NF T77-150-1986 工业硅树脂.羟基含量测定.氢化铝锂还原法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF HYDROXYL GROUPS. METHODS BY REDUCTION WITH LITHIUM-ALUMINIUM HYDRIDE.)
NF T77-151-1986 工业硅树脂.烷氧基含量的测定.气相色谱法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF ALCOXY RADICALS. GAS CHROMATOGRAPHIC METHOD.)
NF T77-152-1987 工业硅树脂.硅含量的测定(硅含量小与百分之一(m /m ).原子吸收分光光度法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF SILICON CONTENT (SILICON CONTENT LESS THAN 1 PER CENT (M/M)). METHOD BY ATOMIC ABSORPTION SPECTROMETRY.)
NF T77-153-1987 工业硅树脂.硅含量的测定(硅含量大于百分之一(m/m).重量法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINAION OF SILICON CONTENT (SILICON CONTENT MORE THAN 1 PER CENT (M/M)). GRAVIMETRIC METHOD.)
NF T77-154-1987 工业硅树脂.硅烷三醇基的含量测定(硅烷三醇含量小于百分之0.5(m/m).气量计法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF SILINETRIYL RADICALS (SILANETRIYL CONTENT MORE THAN 0,5 PER CENT (M/M)). GASVOLUMETRIC METHOD.)
NF T77-155-1987 工业硅树脂.乙烯基的含量的测定(含量大于百分之0.1(m/m).近红外线分光光度法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF VINYL GROUPS (CONTENT MORE THAN 0,1 PER CENT (M/M)). NEAR INFRA-RED SPECTROMETRIC METHOD.)
NF T77-156-1987 工业硅树脂.过氧化物含量的测定.红外线分光光度法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF INTRODUCED PEROXYDES CONTENT. INFRA-RED SPECTROMETRIC METHOD.)
NF T77-157-1987 工业硅树脂.氨基含量的测定电位滴定法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF AMINO GROUPE. POTENTIOMETRIC METHOD.)
NF T77-161-1988 工业硅树脂.聚二甲基硅氧烷.硅烷三醇基的含量(硅烷三醇含量于0.01%cm/m).气相色谱法 (SILICONES. POLYDIMETHYLSILOXANES. DETERMINATION OF SILANETRIYL RADICALS (SILANETRIYL CONTENT LESS THEN 0,01 PER CENT (M/M)). GASCHROMATOGRAPHIC METHOD.)
NF T77-162-1988 工业硅树脂.苯基/硅和苯基/甲基的关系的测定.近红外线分光光度法 (BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF RATIOS PHENYL/SILICIUM AND PHENYL/METHYL. NEAR INFRARED SPECTROMETRIC METHOD.)
NF U42-607-2001 肥料.螯合的微量养料含量和微量养料的螯合系数测定用阳离子交换树脂处理 (Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients.)
NF V32-070-1-1995 辣椒及其含油树脂.用液压色谱分析法测定总辣椒素 (Chillies and chilli oleoresins. Determination of total capsaicinoid content. Part 1 : spectrometric method.)
NF V32-079-1990 香料和佐料.整个胡椒或胡椒粉和含油树脂.用高性能液相色谱法测定胡椒的含量 (SPICES AND CONDIMENTS. WHOLE OR GROUND PEPPER AND PEPPER OLEORESIN. DETERMINATION OF PIPERINE CONTENT BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY.)
编号 中文名称 英文名称

返回