德国阀标准(DIN valve standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号中文名称英文名称
DIN 11832-1-1990 农场和牲畜饲养设备.输送液态粪肥的管道用阀门管件.第1部分:最大1巴的静压力闸阀 Farm and livestock husbandry equipment; shut-off valves for slurry pipes; gate valves for static pressure of max. 1 bar
DIN 11852-2000 食品和化学工业用阀门.不锈钢配件.焊合三通、弯头和异径接头 Valves for food and chemical industries - Stainless steel fittings - Tees, bends, reducers for welding-on
DIN 12918-1-1999 实验室设备.实验室管件.第1部分:水阀 Laboratory equipment - Laboratory fittings - Part 1: Valves for water
DIN 12918-2-2002 实验室设备.实验室配件.第2部分:燃气阀门 Laboratory equipment - Laboratory fittings - Part 2: Valves for fuel gases
DIN 12918-3-2004 实验室设备.实验室配件.第3部分:工业气体阀门 Laboratory equipment - Laboratory fittings - Part 3: Valves for technical gases
DIN 12918-4-2004 实验室设备.实验室配件.第4部分:纯气体阀门 Laboratory equipment - Laboratory fittings - Part 4: Valves for pure gases
DIN 14380-1978 标称压力为16的压力限制阀 Pressure limitation valve, nominal pressure 16
DIN 14381-1999 B型PN 16 自锁紧压力阀 Pressure valve type B PN 16, self-locking
DIN 14461-1-2003 输送阀装置.第1部分:带半刚性管的水龙带卷绕轮 Delivery valve installation - Part 1: Hose reel with semi-rigid hose
DIN 14461-2-1989 消防水龙带连接供水阀."干式”扬水管的供水装置及排水装置 Delivery valve installation connected with dry rising fire mains; filling station and output station
DIN 14461-3-2006 消防用输送阀装置.第3部分:标定压力PN16的水龙带连接阀 Delivery valve installations for firefighting purposes - Part 3: Fire hose valves for nominal pressure PN 16
DIN 14461-4-1989 消防水龙带连接供水阀."干式”扬水管的供水配件PN16 Delivery valve installations connected with dry rising fire mains; filling armaturs PN 16
DIN 14461-5-1984 与干式灭火上升总管道连接的输送阀装置.PN16救火软管阀 Delivery valve installations connected with dry rising fire mains; fire hose valve PN 16
DIN 14461-6-1998 消防水龙带阀门装置.第6部分:扁形消防水龙带壁装消防栓箱的尺寸和安装 Delivery valve installation - Part 6: Dimensions of cabinets and installation of hose reels with lay-flat hoses according to DIN EN 671-2
DIN 14463-3-2003 消防用水设备.遥控注水和排水装置.地3部分:"湿/干"和"干"灭火管道系统PN16通风阀 Water systems for fire extinguishing - Filling and draining devices operated by remote control - Part 3: Valves for ventilation PN 16 of fire extinguishing pipe systems "wet/dry" and "dry"
DIN 16270-2004 压力表用不带试验连接的PN 250和PN 400阀门 PN 250 and PN 400 valves without test connection for pressure gauges
DIN 16271-2004 压力表用带试验连接的PN 250和PN 400阀门 PN 250 and PN 400 valves with test connection for pressure gauges
DIN 16272-2004 压力表用带关闭试验连接的PN 250和PN 400阀门 PN 250 and PN 400 valves with shut-off test connection for pressure gauges
DIN 16287-2004 压力表用阀门和旋塞的试验连接用盖 Caps for test connection on valves and cocks for pressure gauges
DIN 20040-1990 软管管接头.连接套管阀.公称压力16 Hose fittings; nipple valves; nominal pressure 16
DIN 20042-2001 标称压力40的水阀.尺寸和要求 Watervalve, nominal pressure 40 - Dimensions and requirements
DIN 21556-1987 矿井支撑物.单立支撑的阀门.标识代码 Mine support; valves for individual props; identification code
DIN 21557-1987 矿井支承.动力支承的压力极限阀.标识代码 Mine support; yield valves for powered support; identification code
DIN 21635-1998 空气调节系统.空气阀门.结构和操作 Air regulation systems in mining - Air locks - Building and operation
DIN 21636-2003 采矿空气调节系统.带式输送机气阀.尺寸、标识、要求和试验 Air regulation systems in mining - Belt-conveyors-way air locks - Dimensions, identifications, requirements and testing
DIN 24311-1992 液压流体动力.比例控制阀和伺服阀.定义、符号和单位 Hydraulic fluid power; proportional and servo valves; definitions, symbols, units
DIN 24340-2-1982 液压阀.换向阀用安装面和连接板 Hydraulic valves; mounting surfaces and connecting plates for directional control valves
DIN 27205-9-2005 铁路车辆的状况.制动器.第9部分:驾驶员制动阀、控制装置和驾驶室中的显示装置的功能 State of railway vehicles - Brake - Part 9: Function of driver's brake valve, control devices and indicators in driver's cabs
DIN 28140-1-2005 排泄阀用连接件.第1部分:非合金钢、不锈钢或有衬钢.尺寸配合PN10 Connections for bottom discharge valves - Part 1: Non alloyed, stainless or lined steel; dimensions mating PN 10
DIN 28140-2-2005 排泄阀用连接件.第2部分:搪玻璃钢件.连接尺寸PN10 Connections for bottom discharge valves - Part 2: On glass lined steel; connecting dimensions PN 10
DIN 30690-2 Bb.1-1980 煤气安装用零部件.第2部分:煤气器具用阀门的金属材料要求.材料、强度数据的选用说明 Component parts in the gas installation; requirements on metallic materials for valves being used for gas appliances, notes for selection for materials, strength data
DIN 3160-1974 公称压力25巴的冷冻电路的直通截止阀 Through-valves for refrigerant circuits, nominal pressure 25 bar
DIN 3161-1974 公称压力25巴的冷冻电路的弯管阀 Elbow valves for refrigerant circuits; nominal pressure 25 bar
DIN 3162-1974 公称压力25巴的冷冻电路的阀门的螺纹盖板 Screwed caps for valves for refrigerant circuits, nominal pressure 25 bar
DIN 3163-1974 公称压力25巴的冷冻电路的控制直通阀 Control through valves for refrigerant circuits, nominal pressure 25 bar
DIN 3164-1974 冷却剂循环阀的示位器 Position indicator for valves for refrigerant circuits
DIN 3174-1-2000 呼吸器.钢瓶阀门.第1部分:压缩氧气钢瓶阀门 Respiratory equipment - Cylinder valves - Part 1: Cylinder valves for compressed oxygen
DIN 3174-10-1987 呼吸器.消防队用呼吸保护装置阀门.第10部分:外部尺寸 Respiratory equipment; valves for respiratory protective devices; for fire brigades; outer dimensions
DIN 3202-4-1982 阀门面到面尺寸和中心到面尺寸.第4部分:带内螺纹连接的阀门 Face-to-face and centre-to-face dimensions of valves; Valves with female thread connection
DIN 3202-5-1984 阀门面到面尺寸和中心到面尺寸.第5部分:压紧联轴节连接用阀门 Face-to-face and centre-to-face dimensions of valves; valves for connection with compression couplings
DIN 3223-1974 阀用操作扳手 Handling keys for valves
DIN 3223/A1-2002 阀门用的操作键.修改件 A1 Handling keys for valves; Amendment A1
DIN 3227-2002 建筑物饮用水供水阀.角辅助阀.要求和试验 Valves for potable water supply in buildings - Angle service valves - Requirements and tests
DIN 3230-4-1977 阀门交货技术条件.饮用水装置的阀门.要求和检验 Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing
DIN 3236-1-1994 分流器法兰密封管座的直排型阀门.第1部分:无衬 Straight pattern valves with flange socket placed in shunt - Part 1: Without lining
DIN 3236-2-1996 分流器中带法兰密封的流量观查孔玻璃阀门.第1部分:珐琅衬 Straight pattern valves with flange socket placed in shunt - Part 2: With enamel lining
DIN 3237-1-1994 主电源连接的法兰密封管座直排型阀门.第1部分:无衬 Straight pattern valves with flange socket in main power connection - Part 1: Without lining
DIN 3237-2-1994 主电源连接的法兰密封管座直排型阀门.第2部分:带塑料内衬 Straight pattern valves with flange socket in main power connection - Part 2: With plastic lining
DIN 3237-3-1996 主电源连接装置带法兰密封的流量观察孔玻璃阀门.第3部分:带橡胶外皮 Straight pattern valves with flange socket in main power connection - Part 3: With rubber lining
DIN 3247-1985 无止回阀的带法兰的吸滤器 Flanged suction strainers without non-return valve
DIN 3248-1985 无止回阀的螺纹连接的吸滤器 Threaded suction strainers without non-return valve
DIN 3249-1985 带止回阀的螺纹连接的吸滤器 Threaded suction strainers with non-return valve
DIN 32509-1998 焊接、切割及类似工艺用手动关闭阀.结构类型.安全性要求和试验 Hand-operated shut-off valves for welding, cutting and allied processes - Type of construction, safety requirements, tests
DIN 3259-1985 带止回阀的带法兰的吸滤器(脚阀) Flanged suction strainers with non-return valve
DIN 3267-1972 水箱冲泄阀用冲洗管 Flushing tubes for flush-valves
DIN 3280-1988 家用供水管道的阀门.公称压力 PN 10 以下的锥形连接管.概述 Valves for domestic water supply; tapered unions up to PN 10; survey
DIN 3281-1988 家用供水管道的阀门.公称压力10的锥形管子接头.概述 Valves for domestic water supply; tapered union nipples nominal pressure 10; survey
DIN 3283-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带内螺纹的废水排放连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with internal threads
DIN 3284-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带外螺纹的连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; exhaust nipples with external threads
DIN 3285-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.软管连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; hose nipples
DIN 3287-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.管路用带螺纹的连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded nipples for tubes
DIN 3289-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的锥形管子接头 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples
DIN 3291-1988 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的软管连接管 Valves for domestic water supply; nipples and unions nominal pressure 10; threaded hose nipples
DIN 32931-2005 充气娱乐商品和玩具的气阀和气阀套.术语、定义、要求和试验 Valves and valve adapters for inflatable recreational articles and toys - Terms and definitions, requirements and testing
DIN 3334-1968 带法兰接头的加热装置用混合阀.标称压力为6、最高温度110 ℃的三通混合阀、四通混合阀.安装尺寸 Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions
DIN 3335-1968 加热装置的带螺丝端部的混合阀.三通混合阀.四通混合阀.公称压力6.使用温度110 ℃.安装尺寸 Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
DIN 3336-1968 带焊接弯管端的加热装置的混合阀.公称压力6、最大使用温度110 ℃的三通混合阀、四通混合阀.安装尺寸 Mixing valves for heating installations with welding neck ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
DIN 3338-1987 多转的阀门启动器连接.C形传动部件的尺寸 Multi-turn valve actuator attachment; dimensions of type C driving components
DIN 3341-1989 容积式压缩机的板阀.吸气阀.放气阀.主要尺寸.材料和安装 Plate valves for displacement compressors; suction valves, discharge valves; main dimensions, materials, installation
DIN 3352-5-1980 钢制滑门阀.第5部分:同形系列 Steel gate valves, isomorphe series
DIN 3356-1-1982 球形阀.第1部分:一般数据 Globe valves; General data
DIN 3357-4-1981 满孔有色金属球阀 Full bore nonferrous metal ball valves
DIN 3357-5-1981 变径孔有色金属球阀 Reduced bore nonferrous metal ball valves
DIN 3358-1982 线性阀门操作机构.配合尺寸 Linear valve actuator attachment; mating dimensions
DIN 3383-1-1990 煤气软管组件和连接阀.安全软管组件、带有快速连接装置的安全阀 Hose assemblies and connection valves for gas; safety hose assemblies, safety valves with quick connecting device
DIN 3394-1-2004 自动控制阀.第1部分:压力为4巴到16巴的减压安全和调节阀 Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar
DIN 3394-3-2004 自动控制阀.第3部分:压力为4巴及以下的0级减压安全阀 Automatic control valves - Part 3: Class 0 pressure relief, valves for pressure up to 4 bar
DIN 3399-1986 燃气低压截止阀.安全性要求和试验 Gas low-pressure cut-off valves; safety requirements, testing
DIN 3430-1986 燃气阀.角型球截止阀 Gas valves; angle pattern ball shut-off valves
DIN 3431-1986 燃气阀门.压力连接的角型球截止阀 Gas valves; angle pattern ball shut-off valves with compression coupling
DIN 3432-1986 燃气阀门..压力连接的直型球截止阀 Gas valves; straight pattern ball shut-off valves with compression coupling
DIN 3475-1993 未处理水和可饮用水用的球墨铸铁管阀和管接头.内部涂搪瓷防腐蚀.质量要求和试验 Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing
DIN 3476-1996 生水和饮用水用阀门和接头.粉漆及环氧内涂防腐层.要求和检验 Valves and fittings for untreated and potable water - Protection against corrosion by internal epoxy coating of coating powders (P) or liquid varnishes (F) - Requirements and tests
DIN 3500-1990 家用供水装系统的截流阀.PN10 活塞式滑阀 PN 10 piston type gate valves for use in drinking water supply systems
DIN 3502-2002 家庭用供水截流阀.双通阀.倾斜式阀帽PN10型.Y型阀.DVGW技术规则 Stopvalves for domestic water supply - Two-way valves - Oblique bonnet type PN 10; Y-type valve; Technical rule of the DVGW
DIN 3509-1981 供水阀二维特性.PN10型水龙头 Valves for water supply dimensional characteristics; taps PN 10
DIN 3512-2002 家庭用供水截流阀.双路阀.立式阀帽型PN10:直线型球形阀:DVGW的技术规则 Stopvalves for domestic water supply - Two-way valves - Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW
DIN 3528-1986 煤气装置用阀门.带密封垫的喷嘴 Valves for gas installations; nozzles with gasket
DIN 3529-1982 气体装置阀.内螺纹连接端直通型旋塞 Valves for gas installations; straight pattern stop cocks female threaded ends
DIN 3532-1981 煤气装置用阀门.角度型旋阀 Valves for gas installations; angle pattern stop cocks
DIN 3533-1981 煤气装置用阀门.带压力接头的角度型旋阀 Valves for gas installations; angle pattern stop cocks with compression fitting
DIN 3534-1982 气体装置阀.带压紧接头的直通型龙头 Valves for gas installations; straight pattern taps with compression fitting
DIN 3535-1-1991 煤气供气密封件:家用设备煤气阀门用弹性密封材料:要求和检验 Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
DIN 3535-6-1999 供气用密封垫.第6部分:气阀、煤气设备和煤气主管道用基于合成纤维、石墨或聚四氟乙烯的密封垫材料 Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains
DIN 3536-1994 室内设备、煤气分配和煤气输送管道的煤气阀用润滑剂 Lubricants for gas valves in indoor installation, gas distribution, and gas transportation pipe lines
DIN 3538-1986 煤气装置阀门.蝶型阀.内螺纹接头 Valves for gas installations; butterfly valves; female threaded ends
DIN 3543-1-1984 金属排放阀.要求、检验 Metal tapping valves; requirements, testing
DIN 3543-2-1984 金属攻丝断流阀.尺寸 Metallic tapping stop valves; dimensions
DIN 3543-3-1978 塑料管用PVC排放阀.尺寸 PVC tapping valves for plastic pipes; dimensions
DIN 3543-4-1984 高密度管道用高密度聚乙烯排放阀.尺寸 High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions
DIN 3546-1-2002 家庭用供水截流阀.第1部分:放水阀、门阀和隔膜阀用截流阀、手动式活塞型门阀用一般要求和试验.DVGW的技术规 Stopvalves for domestic water supply - Part 1: General requirements and tests for manually operated piston type gate valves, stopvalves for tapping valves, gate valves and diaphragm valves; Technical rule of the DVGW
DIN 3548-1-1993 带法兰凝汽阀 Flanged steam traps
DIN 3581-1990 气体管道.1号规格的管阀箱 Gas pipelines; size 1 valve box
DIN 3582-1990 气体管道.2号规格的管阀箱 Gas pipelines; size 2 valve box
DIN 3583-1990 气体管道.3号规格的管阀箱 Gas pipelines; size 3 valve box
DIN 3584-1990 气体管道.4号规格的管阀箱 Gas pipelines; size 4 valve box
DIN 3585-1990 气体管道.5号规格的管阀箱 Gas pipelines; size 5 valve box
DIN 3842-1979 PN 10加热设备阀门.尺寸.材料.结构 Valves for heating installations, PN 10; dimensions, materials, design
DIN 3844-1981 供暖设备用阀.带螺纹承插口的铜合金制PN16球阀.尺寸、材料 Valves for heating installations; copper alloy globe valves PN 16 with screwed sockets; dimensions, materials
DIN 3848-1981 供暖设备阀.PN12.5 注水和排气开关.尺寸.材料 Valves for heating installations; filling and evacuating taps PN 12.5; dimensions, materials
DIN 3852-1-2002 配件和阀门用螺柱端和孔.第1部分:带公制小螺距螺纹螺塞.一般外置型 Stud ends, ports, for fittings, valves - Part 1: Plug screw with metric fine pitch thread; General outlay of types
DIN 3852-11-1994 压合接头、阀门、螺旋塞和E型螺纹管堵用螺纹管堵和螺纹孔.设计尺寸 Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions
DIN 3852-2-2000 管件和阀门用管堵和螺纹孔.带惠氏管螺纹的螺塞.各类的总成本 Stud ends, ports, for fittings, valves - Plug screw with Whitworth pipe thread - General outlay of types
DIN 4000-13-1987 阀门用产品特性图表 Tabular layouts of article characteristics for valves
DIN 4055-1992 水管.地下消防栓的阀门室.DVGW实施规程 Water pipelines; valve box for underground hydrants; DVGW code of practice
DIN 4056-1992 水管.截止阀门室.DVGW实施规程 Water pipelines; valve boxes for stop valves; DVGW code of practice
DIN 4057-1992 水管.放水阀门室.DVGW实施规程 Water pipelines; valve box for tapping valves; DVGW code of practice
DIN 40741-1-1999 铅酸蓄电池.工业用带有正栅极板的固定阀稳定蓄电池和固定电解质.额定电容、主要尺寸和重量 Lead-acid batteries - Stationary valve regulated batteries with positive grid plates and immobilized electrolyte for industrial application - Rated capacities, main dimensions, weights
DIN 42568-1982 变压器.取样和排放用15和32公称内径的放出阀 Transformers; outlet valve DN 15 and DN 32 for sampling and discharge
DIN 43689-1977 电气开关装置中空气压缩装置用40(570 psig)和64 (911 psig)断流阀. Shut-off valves 40 (570 psig) and 64 (911 psig) for compressed-air installations in electrical switching plants
DIN 45635-50-1987 机器空气噪声的测量.空气噪声测量.包络面法.阀门 Measurement of noise emitted by machines; airborne noise measurement, enveloping surface method; valves
DIN 475-1-1984 第1部分:螺栓、螺钉、阀门和配件用扳手开口度 Widths across flats for bolts, screws, valves and fittings
DIN 477-4-1982 压力气瓶阀.野营用储气瓶的旋转止回阀 Compressed gas cylinder valves; swing check valves for camping-cylinders
DIN 477-5-2002 气瓶阀.第5部分:最大试验压力为450巴.出口接头 Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections
DIN 4817-1-1981 液化气截止阀.定义、要求、试验和标记 Shut off valves for liquefied gases; definitions, requirement, testing, marking
DIN 5589-1990 有轨车辆的压缩空气装置.安全阀.安装和连接尺寸及要求 Compressed air equipment for rail vehicles; safety valves; mounting and connecting dimensions, requirements
DIN 5593-1994 铁路车辆用压缩空气装置.止回阀.安装和连接尺寸 Compressed air equipment for rail vehicles - Check valves - Installation and companion dimensions
DIN 5594-1994 铁路车辆用压缩空气装置.双止回阀.安装和连接尺寸 Compressed air equipment for rail vehicles - Double check valves - Installation and companion dimensions
DIN 58362-7-2002 输液.输液器和附件.第7部分:止回阀 Infusion - Infusion equipment and accessories - Part 7: Check valves
DIN 58600-2003 呼吸保护器.德国消防队用自调需氧量氧气调节阀与独立开路压缩空气呼吸器面罩之间的插塞连接 Respiratory protective devices - Plug-in connection between lung governed demand valve and facepiece for self-contained open-circuit compressed air breathing apparatus for use by German fire brigade
DIN 6273-1973 内燃机.指示阀 Internal combustion engines; indicator valves
DIN 6274-1982 通用内燃机.带阀门组的压缩空气罐.内径为38mm.装配 Internal combustion engines for general purposes; Compressed air containers with valve block; 38 mm bore; Assembly
DIN 6276-1982 通用内燃机.压缩空气罐的阀门组.内径为38mm Internal combustion engines for general purposes; Valve blocks for compressed air containers; 38 mm bore
DIN 71401-1-1985 内燃机排气阀.不用于新设计 Drain cocks for internal combustion engines; not to be used for new designs
DIN 73368-1986 燃料喷射装置的溢流阀和空心螺钉 Overflow valves and hollow screw for fuel injection devices
DIN 74279-2001 气压制动系统.过流阀 Air braking systems - Charging valves
DIN 74280-1998 空气制动系统.止回阀 Air braking systems - Check valve
DIN 74341-1987 气压制动系统.回流循环阀 Air braking systems; shuttle valve with backflow
DIN 7786-1977 内胎气门.有旋转阀体的单弯结构轮胎气门 Tube valves; swivel type tyre valve, single bend form
DIN 78026-1978 无内胎的车轮气门阀.充空气 - 水用的金属座式气门阀 Valves for tubeless tyres; metal base type for air-waterfilling
DIN 85003-1-1997 船用阀门技术规范.第1部分:总则 Technical specifications for valves for shipboard use - Part 1: General
DIN 85003-2-1997 船用阀门技术规范.第2部分:可能提出的要求和试验方法 Technical specifications for valves for shipboard use - Part 2: Survey of possible requirements and methods of test
DIN 85003-3-1997 船用阀门技术规范.第3部分:蝶阀 Technical specifications for valves for shipboard use - Part 3: Butterfly valves
DIN 85003-4-1997 船用阀门技术规范.第4部分:停止阀 Technical specifications for valves for shipboard use - Part 4: Stop valves
DIN 85003-5-1997 船用阀门技术规范.第5部分:截止止回阀 Technical specifications for valves for shipboard use - Part 5: Cutt off type non return valves
DIN 85003-6-1997 船用阀门技术规范.第6部分:手动停止阀 Technical specifications for valves for shipboard use - Part 6: Hand operated gate valves
DIN 85003-7-1997 船用阀门技术规范.第7部分:隔膜阀 Technical specifications for valves for shipboard use - Part 7: Diaphragm valves
DIN 85003-8-1999 船用阀门技术规范.第8部分:球阀 Technical specifications for valves for shipboard use - Part 8: Ball valves
DIN 86066-2002 止回阀用铸钢焊接弯头.根据PN 10的连接尺寸 DN 50至150 Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10
DIN 86211-1991 公称压力(PN)16、带C或B型消防软管管接头和带法兰连接的灭火阀 Fire valves for PN 16, with fire hose couplings type C or B and with flange connection
DIN 86251-1998 造船用DN15至500规格的带法兰的铸铁截止阀 Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500
DIN 86252-1998 造船用DN15至500规格的带法兰的铸铁单向阀 Non return valves for shipboard use, cutt off type, of cast iron, with flanges, DN 15 to 500
DIN 86259-2000 船只及造船技术.超轻型DN32-DN125(PN10)凸缘闸阀 Ships and marine technology - Flanged gate valves extra light duty DN 32 to DN 125, PN 10
DIN 86260-1998 造船用DN15至500规格的带法兰的炮铜截止阀 Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500
DIN 86261-1998 造船用DN15至500规格的带法兰的截止型炮铜单向阀 Non return valves for shipboard use, cutt off type, of gun metall, with flanges, DN 15 to 500
DIN 86263-2000 Y型,软密封,承口连接的船用直通阀.DN15-DN50,PN16 Straight way valves for shipboard use - Y-patten, soft sealing, with socket connection - DN 15 to DN 50, PN 16
DIN 86264-2000 Y型,软密封,带法兰的短型船用直通阀.DN15-DN200 Straight way valves for shipboard use - Y-patten, soft sealing, short type with flanges - DN 15 to DN 200
DIN 86265-2000 Y型,软密封,普通型带法兰的船用直通阀.DN15-DN200 Straight way valves for shipboard use - Y-patten, soft sealing, normal type, with flanges - DN 15 to DN 200
DIN 86501-2002 符合DIN 3861的与W出口端成24度连接的炮铜制螺纹帽状阀门 Valves, screwed bonnet type of gun metal with 24°-connection with port end W according to DIN 3861
DIN 86528-1996 螺盖阀的锁紧垫板圈 Tab washers for screwed bonnet valves
DIN 86552-2002 符合DIN 3861的与W出口端成24度连接的钢制螺纹帽状阀门 Valves, screwed bonnet type of steel with 24°-connection with port end W according to DIN 3861
DIN 86720-2002 带螺纹的阀帽和法兰DN 20 至 DN 100、PN 16 的炮铜制楔形滑门阀 Gate valves flat sided of gun metall with screwed bonnet and flanges, DN 20 to DN 100, PN 16
DIN 87101-2003 DN为50-150、标称压力为1的垂直自闭式止回阀(止回排水阀).标称压力为10的法兰的配合尺寸 Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10
DIN 87303-2000 船上阀用带有锥形和平行面的直角器 Squares with tapered and parallel sides for valves for shipboard use
DIN 87308-1999 船上用阀门的操作装置.带锥形侧面的四方孔手摇曲柄 Operating devices for valves for shipboard use - Crank handles with square hole with tapered sides
DIN 87901-2001 泵用双向安全阀 Sniffle valves for pumps
DIN 8905-3-1983 带密封和半密封压缩机的制冷系统用管道.毛细节流阀的补充交货技术条件 Tubes for refrigerating systems with hermetic and semi-hermetic compressors; additional technical delivery conditions for capillary restrictor tubes
DIN EN 10090-1998 内燃机阀门用钢及合金 Valve steels and alloys for internal combustion engines; German version EN 10090:1998
DIN EN 1074-1-2000 供水用阀门.适用性要求和专用验证试验.第1部分:一般要求 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements; German version EN 1074-1:2000
DIN EN 1074-2-2004 供水用阀门.适用性要求和适当的验证试验.第2部分:隔离阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves; German version EN 1074-2:2000 + A1:2004
DIN EN 1074-3-2000 供水用阀门.目的要求和专用检查试验的合理性.第3部分:止回阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000
DIN EN 1074-4-2000 供水用阀门.目的要求适用性和适用验证试验.第4部分:空气阀 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves; German version EN 1074-4:2000
DIN EN 1074-5-2001 供水阀门.适用性要求和适配试验.第5部分:控制阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves; German version EN 1074-5:2001
DIN EN 1074-6-2004 供水用阀门.适用性要求和相应的检查试验.第6部分:给水栓 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants; German version EN 1074-6:2004
DIN EN 1092-1-2002 法兰及其连接件.管道、阀门、配件和附件用圆形法兰.第1部分:用PN标注的钢制法兰; 德文版本 EN 1092-1:2001 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories - Part 1: Steel flanges, PN designated; German version EN 1092-1:2001
DIN EN 1092-3-2004 法兰及其连接件.PN标注的管道、阀门、配件和附件用圆形法兰.第3部分:铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
DIN EN 1092-4-2002 法兰及其连接件.按PN标志的管道、阀门、配件和附件用圆形法兰.第4部分:铝合金法兰; 德文版本 EN 1092-4:200 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges; German version EN 1092-4:2002
DIN EN 1111-1998 卫生设备管件.恒温混合阀(PN 10).通用技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification; German version EN 1111:1998
DIN EN 1171-2003 工业阀门.铸铁闸阀 Industrial valves - Cast iron gate valves; German version EN 1171:2002
DIN EN 12050-4-2001 建筑物和施工场地废水提升装置.制造和试验原理.第4部分:无粪便废水和含粪便废水单向阀 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter; German version EN 12050-4:2000
DIN EN 12094-13-2001 固定式消防系统.气体灭火系统用部件.第13部分:止回阀和非止回阀的要求和试验方法; 德文版本 EN 12094-13:20 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves; German version EN 12094-13:2001
DIN EN 12094-4-2004 固定式消防系统.气体灭火系统用元件.第4部分:容器阀组件及其传动装置的要求和试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for container valve assemblies and their actuators; German version EN 12094-4:2004
DIN EN 12094-5-2006 固定式消防系统.气体灭火系统元件.第5部分:高和低压力选择器阀及其启动器的要求和试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators; German version EN 12094-5:2006
DIN EN 12100-1997 塑料管道系统.聚乙烯(PE)阀.三点负载抗弯曲试验方法 Plastics piping systems - Polyethylene (PE) valves - Test method for the resistance to bending between supports; German version EN 12100:1997
DIN EN 12107-1997 塑料管道系统.注塑热塑性塑料配件、阀门和附件.注塑热塑材料管件持久静液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components; German version EN 12107:1997
DIN EN 12117-1997 塑料管道系统.配件、阀门和附件.气流和压降关系的测定 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships; German version EN 12117:1997
DIN EN 1213-1999 建筑阀门.建筑物饮用水铜合金截止阀.试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999
DIN EN 12201-4-2002 供水用塑料管系统.聚乙烯(PE).第4部分:阀; 德文版本 EN 12201-4:20 Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves; German version EN 12201-4:2001
DIN EN 12259-2-2001 固定灭火系统.喷头和喷水系统元部件.第2部分:报警湿阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies (includes Amendment A1:2001); German version EN 12259-2:1999 + A1:2001
DIN EN 12259-2/A2-2006 固定灭火系统.喷头和喷水系统元部件.第2部分:报警湿阀组件.德文版本 EN 12259-2-1999/A2-2005 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies; German version EN 12259-2:1999/A2:2005
DIN EN 12259-3-2001 固定灭火系统.喷头和喷水系统元部件.第3部分:报警干阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies (includes Amendment A1:2001); German version EN 12259-3:2000 + A1:2001
DIN EN 12259-3/A2-2006 固定式消防系统.喷头和喷水系统用部件.第3部分:报警干阀组件; 德文版本 EN 12259-3-2000/A2-2005 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies; German version EN 12259-3:2000/A2:2005
DIN EN 12266-1-2003 工业用阀门.阀门试验.第1部分:压力试验、试验程序和验收准则.强制性要求 Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2003
DIN EN 12266-2-2003 工业用阀门.阀门测试.第2部分:试验、试验规程和验收标准.补充要求 Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements; German version EN 12266-2:2002
DIN EN 12284-2004 制冷系统和热泵.阀.要求、检验和标记 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking; German version EN 12284:2003
DIN EN 12288-2003 工业阀门.铜合金闸阀 Industrial valves - Copper alloy gate valves; German version EN 12288:2003
DIN EN 12334-2004 工业阀门.铸铁止回阀 Industrial valves - Cast iron check valves; German version EN 12334:2001 + A1:2004
DIN EN 12351-1999 工业阀门.带法兰联接的阀门用护罩.德文标准12351:1999 Industrial valves - Protective caps for valves with flanged connections; German version EN 12351:1999
DIN EN 12380-2003 排水系统通气阀.要求、试验方法和合格评定 Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity; German version EN 12380:2002
DIN EN 12514-2-2000 油燃烧器供油系统的安装.第1部分:安全要求和试验.部件,阀门管道,过滤器,油气分离器,油量计 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000
DIN EN 12516-1-2005 工业用阀.外壳设计强度.第1部分:钢阀外壳用造表方法 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells; German version EN 12516-1:2005
DIN EN 12516-2-2004 工业用阀.外壳设计强度.第2部分:钢阀外壳的计算方法 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells; German version EN 12516-2:2004
DIN EN 12516-3-2003 阀门.外壳设计强度.第3部分:实验方法; 德文版本 EN 12516-3:2002 Valves - Shell design strength - Part 3: Experimental method; German version EN 12516-3:2002
DIN EN 12541-2003 卫生便池.压力冲洗阀和自动关闭冲水阀 Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10; German version EN 12541:2002
DIN EN 12567-2000 工业阀门.液化天然气用隔离阀.适用性及适用验证试验规范 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests; German version EN 12567:2000
DIN EN 12569-2001 工业阀门.化学和石油化工工业用阀门.要求和试验 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests (includes Corrigendum AC:2000); German version EN 12569:1999 + AC:2000
DIN EN 12570-2000 工业阀门.操作元件尺寸控制方法 Industrial valves - Method for sizing the operating element; German version EN 12570:2000
DIN EN 12627-1999 工业阀门.钢阀门用对焊端头 Industrial valves - Butt welding ends for steel valves; German version EN 12627:1999
DIN EN 1267-1999 阀门.以水作试验流体的流动阻力试验 Valves - Test of flow resistance using water as test fluid; German version EN 1267:1999
DIN EN 12760-1999 阀门.钢阀门的承口焊接端头 Valves - Socket welding ends for steel valves; German version EN 12760:1999
DIN EN 1286-1999 卫生器具管件.低压机械调混合阀.通用技术规范 Sanitary tapware - Low pressure mechanical mixing valves; general technical specification; German version EN 1286:1999
DIN EN 1287-1999 卫生器具管件.低压恒温混合阀.通用技术规范 Sanitary tapware - Low pressure thermostatic mixing valves; general technical specification; German version EN 1287:1999
DIN EN 12982-2000 工业阀门.铰链焊接端阀门端对端和中心对末端尺寸 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves; German version EN 12982:2000
DIN EN 13082-2001 危险货物运输罐.运输罐配套设备.蒸汽传输阀门 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve; German version EN 13082:2001
DIN EN 13152-2003 自闭合式液化石油气储气瓶阀的规范和检验 Specification and testing of LPG cylinder valves - Self closing (includes Amendment A1:2003); German version EN 13152:2001 + A1:2003
DIN EN 13153-2003 手工操作的液化石油气瓶阀门的规范和试验 Specification and testing for liquefied petroleum gas (LPG) cylinder valves - Manually operated (includes Amendment A1:2003); German version EN 13153:2001 + A1:2003
DIN EN 13175-2005 液化石油气(LPG)罐阀门及配件的规范和试验 Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings; German version EN 13175:2003 + A1:2005
DIN EN 13244-4-2003 地下和地上通用压力排水系统的塑料管道系统.聚乙烯(PE).第4部分:阀门 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves; German version EN 13244-4:2002
DIN EN 13308-2003 危险物品运输槽罐车.槽罐车辅助设备.无压平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve; German version EN 13308:2002
DIN EN 13312-5-2001 生物技术.管路和仪器性能准则.第5部分:阀门 Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves; German version EN 13312-5:2001
DIN EN 13316-2003 危险物品运输槽罐车.槽罐车辅助设备.压力平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002
DIN EN 13397-2002 工业用阀门.金属材料制隔膜阀门; 德文版本 EN 13397:2001 Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001
DIN EN 1349-2000 工业过程控制阀门 Industrial process control valves; German version EN 1349:2000
DIN EN 13617-3-2004 加油站.第3部分:剪阀的建造和性能的安全要求 Petrol filling stations - Part 3: Safety requirements for construction and performance of shear valves; German version EN 13617-3:2004
DIN EN 13648-1-2002 冷凝容器.超压保护设施.第1部分:冷凝设备安全阀 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service; German version EN 13648-1:2002
DIN EN 13709-2003 工业用阀.钢制球阀、球状截止阀和止回阀 Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002
DIN EN 13774-2003 最大工作压力为16bar及以下的配气系统用阀.性能要求 Valves for gas distribution systems with maximum operating pressure 16 bar - Performance requirements; German version EN 13774:2003
DIN EN 13786-2004 丁烷、丙烷或其混合物用最大输出压力4巴以下(包括4巴)和最大容量100 kg/h以下(包括100 kg/h)的自动转换阀及 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 13786:2004
DIN EN 13789-2003 工业用阀.铸铁球阀 Industrial valves - Cast iron globe valves; German version EN 13789:2002
DIN EN 13792-2002 实验室用旋塞和阀门的颜色编码; 德文版本 EN 13792:2002 Colour coding of taps and valves for use in laboratories; German version EN 13792:2002
DIN EN 13828-2003 建筑物用阀.建筑物内饮用水供应用手动铜合金和不锈钢球阀.试验和要求 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements; German version EN 13828:2003
DIN EN 13942-2005 石油和天然气工业.管道输送系统.管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999 modified); English version EN 13942:2003
DIN EN 13953-2003 液化石油气(LPG)用可运输的再充式储气瓶的减压阀 Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG); German version EN 13953:2003
DIN EN 13959-2005 防污止回阀.包括DN 6至DN 250.E系列A、B、C、D型 Anti-pollution check valves - DN 6 to DN 250 inclusive - Family E, type A, B, C and D; German version EN 13959:2004
DIN EN 14071-2005 LPG罐用减压阀.辅助设备 Pressure relief valves for LPG tanks - Ancillary equipment; German version EN 14071:2004
DIN EN 14124-2005 带内溢水口的冲洗水箱用入口阀 Inlet valves for flushing cisterns with internal overflow; German version EN 14124:2004
DIN EN 14129-2005 LPG罐用减压阀 Pressure relief valves for LPG tanks; German version EN 14129:2004
DIN EN 14141-2004 天然气输送管道用阀门.性能要求和试验 Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2003
DIN EN 14189-2003 可运输储气瓶.储气瓶定期检查时气瓶阀的检查和维修 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders; German version EN 14189:2003
DIN EN 144-1-2005 呼吸保护器.气瓶阀门.第1部分:旋入式连接器的螺纹连接 Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector; German version EN 144-1:2000 + A1:2003 + A2:2005
DIN EN 144-2-1999 呼吸防护装置.气瓶阀门.第2部分:出口连接件 Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections; German version EN 144-2:1998
DIN EN 144-3-2003 呼吸保护器.气瓶阀门.第3部分:潜水用硝基气体和氧气气瓶的出口连接件 Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen; German version EN 144-3:2003
DIN EN 14432-2006 危险货物运输用容器.液体化学物品运输的容器设备.货物卸载和空气进给阀 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves; German version EN 14432:2006
DIN EN 14433-2006 危险货物运输用容器.液体化学物品运输的容器设备.脚踩阀 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves; German version EN 14433:2006
DIN EN 14451-2005 防饮用水回流污染的装置.直通反回流阀DN 8至DN 80. A型D系列 Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 - Family D, type A; German version EN 14451:2005
DIN EN 14455-2005 防饮用水回流污染的装置.压缩空气进气阀DN15至DN 50. A型和B型L系列 Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 - Family L, type A and type B; German version EN 14455:2005
DIN EN 1452-4-1999 供水用塑料管道系统.未增塑聚氯乙烯.第4部分:阀门和辅助设备 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment; German version EN 1452-4:1999
DIN EN 14529-2006 呼吸保护装置.逃生用包含由需求阀控制的正压呼吸器的带半罩式面具的自持式开路压缩空气呼吸机 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only; German version EN 14529:2005
DIN EN 14593-1-2005 呼吸保护装置.带断续供氧阀门的压缩气体管路呼吸装置.第1部分:带全罩式面具的装置.要求、试验、标记 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Apparatus with a full face mask - Requirements, testing, marking; German version EN 14593-1:2005
DIN EN 14593-2 Berichtigung 1-2006 呼吸器保护装置.带断续供养阀门的压缩气体管路呼吸装置.第2部分:带增压半罩式面具的装置.要求、试验、标记. Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking; German version EN 14593-2:2005, Corrigenda to DIN EN 14593-2:2005-07; German version EN 14593-2:2005/AC:2005
DIN EN 14593-2-2005 呼吸器保护装置.带断续供氧阀门的压缩气体管路呼吸装置.第2部分:带增压半罩式面具的装置.要求、试验、标记 Respiratory protective devices - Compressed air line breathing with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking; German version EN 14593-2:2005
DIN EN 14596-2005 危险物品运输罐.罐的辅助设备.应急减压阀 Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve; German version EN 14596:2005
DIN EN 14848-2006 气溶胶容器.25.4 mm孔径的金属容器.阀座尺寸.德文版本 EN 14848-2005 Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups; German version EN 14848:2005
DIN EN 14849-2006 气溶胶容器.玻璃容器.气溶胶阀箍尺寸.德文版本 EN 14849-2005 Aerosol containers - Glass containers - Dimensions of aerosol valve ferrules; German version EN 14849:2005
DIN EN 1487-2000 建筑物阀门.液压安全类.试验和要求 Building valves - Hydaulic safety groups - Tests and requirements; German version EN 1487:2000
DIN EN 1488-2000 建筑物阀门.膨胀类.试验和要求 Building valves - Expansion groups - Tests and requirements; German version EN 1488:2000
DIN EN 1489-2000 建筑物阀门.压力安全阀门.试验和要求 Building valves - Pressure safety valves - Tests and requirements; German version EN 1489:2000
DIN EN 1490-2000 建筑物阀门.组合型温度压力安全阀.试验和要求 Building valves - Combined temperature and pressure relief valves - Tests and requirements; German version EN 1490:2000
DIN EN 1491-2000 建筑物阀门.膨胀阀门.试验和要求 Building valves - Expansions valves - Tests and requirements; German version EN 1491:2000
DIN EN 14912-2006 LPG设备和组件.在钢瓶的定期检查中液化石油气瓶阀的检查和维修.德文版本EN 14912-2005 LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders; German version EN 14912:2005
DIN EN 1503-1-2001 阀门.阀体、阀盖和阀套用材料.第1部分:欧洲标准规定的钢 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European standards; German version EN 1503-1:2000
DIN EN 1503-2-2001 阀门.阀体、阀盖和阀套材料.第2部分:欧洲标准中没有规定的钢 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified; German version EN 1503-2:2000
DIN EN 1503-3-2001 阀门.阀体、阀盖和阀套材料.第3部分:欧洲标准规定的铸铁 Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European standards; German version EN 1503-3:2000 + AC:2001
DIN EN 1503-4-2003 阀门.阀体、阀盖和阀套材料.第3部分:欧洲标准规定的铜合金 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards; German version EN 1503-4:2002
DIN EN 1555-4-2003 气体燃料塑料管道供气系统.聚乙烯(PE).第4部分:阀门 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves; German version EN 1555-4:2002
DIN EN 1567-2000 建筑物阀门.水减压阀和组合水减压阀.要求和试验 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests; German version EN 1567:1999
DIN EN 161-2002 气体燃烧器和燃气器具用自动关闭阀; 德文版本 EN 161:2001 Automatic shut-off valves for gas burners and gas appliances; German version EN 161:2001
DIN EN 1626-1999 低温容器.低温条件使用阀门 Cryogenic vessels - Valves for cryogenic service; German version EN 1626:1999
DIN EN 1643-2001 燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000
DIN EN 1680-1997 塑料管道系统.聚乙烯(PE)管道系统用阀门.操作机构弯曲时和弯曲后密封性试验方法 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
DIN EN 1704-1997 塑料管道系统.热塑管道系统用阀门.弯曲加温度循环后阀门完好性测试方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending; German version EN 1704:1997
DIN EN 1705-1997 塑料管道系统.热塑阀门.外部冲击后阀门完好性试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow; German version EN 1705:1996
DIN EN 1759-1-2005 法兰及其连接件.等级标示的管、阀、配件和附件用圆形法兰.第1部分:钢法兰.NPS 1/2至24 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24; German version EN 1759-1:2004
DIN EN 1759-3-2004 法兰及其接头.等级标示的管、阀、配件和附件用圆形法兰.第3部分:铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
DIN EN 1759-4-2003 法兰及其接头.指定类别的管、阀、配件和附件用圆形法兰.第4部分:铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges; German version EN 1759-4:2003
DIN EN 1827-1999 呼吸防护装置.不带吸入阀门和带气体、含尘粒气体或纯尘粒分立式过滤器的半罩式面具.要求、检测、标识 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking; German version EN 1827:1999
DIN EN 19-2002 工业用阀门.金属阀标志; 德文版本 EN 19:2002 Industrial valves - Marking of metallic valves; German version EN 19:2002
DIN EN 1964-2-2002 可运输气瓶.水容量为0.5升到150升(含150升)的可再填充可运输无缝钢瓶设计和制造规范.第2部分:阀门压力R<上 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R<(Index)m> value of 1100 MPa and above; German version EN 1964-2:2001
DIN EN 1983-2006 工业阀门.钢制球阀 Industrial valves - Steel ball valves; German version EN 1983:2006
DIN EN 1984-2000 工业阀门.钢门阀门 Industrial valves - Steel gate valves; German version EN 1984:2000
DIN EN 200-2005 卫生设备管件.单排阀和混合阀(PN 10).一般技术规范 Sanitary tapware - Single taps and combination taps (PN 10) - General technical specification; German version EN 200:2004
DIN EN 215-2006 恒温散热器阀.要求和试验方法 Thermostatic radiator valves - Requirements and test methods; German version EN 215:2004 + A1:2006
DIN EN 26554-1991 法兰连接的自动凝汽阀.面与面结合尺寸(ISO 6554-80) Flanged automatic steam traps; face-to-face dimensions (ISO 6554:1980); german version EN 26554:1991
DIN EN 26704-1991 自动蒸汽阀.分类 Automatic steam traps; classification (ISO 6704:1982); german version EN 26704:1991
DIN EN 26948-1991 自动凝汽阀.生产和性能特征试验.(ISO 6948-81) Automatic steam traps; production and performance characteristic tests (ISO 6948:1981); german version EN 26948:1991
DIN EN 27841-1991 自动凝汽阀.蒸汽损失的测定.试验方法.(ISO 7841-88) Automatic steam traps; determination of steam loss; test methods (ISO 7841:1988); german version EN 27841:1991
DIN EN 27842-1991 自动凝汽阀.排流量的测定.试验方法.(ISO 7842-88) Automatic steam traps; determination of discharge capacity; test methods (ISO 7842:1988); german version EN 27842:1991
DIN EN 28233-1991 热塑性塑料阀.扭矩.试验方法(ISO 8233-88) Thermoplastics valves; torques; test method (ISO 8233:1988); german version EN 28233:1990
DIN EN 28659-1991 热塑性塑料阀.疲劳强度.试验方法(ISO 8659-88) Thermoplastic valves; fatigue strength; test method (ISO 8659:1989); german version EN 28659:1990
DIN EN 331-1999 建筑物燃气设备上的手动球阀和底部关闭锥形塞阀 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings; German version EN 331:1998
DIN EN 405-2002 呼吸保护设备.防煤气或防煤气与粉尘的带阀过滤半罩式面罩.要求、检验、标记; 德文版本 EN 405:2001 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking; German version EN 405:2001
DIN EN 417-2003 便携式燃具用带或不带阀门的一次性使用液化石油气金属气罐.制造、检验、试验和标记 Non-refillable metallic cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking; German version EN 417:2003
DIN EN 45510-7-1-2000 发电厂设备和系统购置指南.第7-1部分:管道系统和阀.高压管道系统 Guide for procurement of power station plant, equipment and systems - Part 7-1: Pipework and valves; high pressure piping systems; German version EN 45510-7-1:1999
DIN EN 45510-7-2-2000 发电厂设备和系统购置指南.第7-2部分:管道系统和阀.锅炉和高压管路阀门 Guide for procurement of power station plant, equipment and systems - Part 7-2: Pipework and valves; boiler and high pressure piping valves; German version EN 45510-7-2:1999
DIN EN 488-2003 区域供暖管道.直埋式热水供应网预隔热连接管道系统.聚氨酯绝热和聚乙烯外覆层钢管钢阀门组件 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003
DIN EN 50216-8-2005 电力变换器和反应器配件.第8部分:绝缘液电路用蝶阀 Power transformer and reactor fittings - Part 8: Butterfly valves for insulating liquid circuits; German version EN 50216-8:2005
DIN EN 558-1-1995 工业阀门.带法兰管道中的金属阀门面-面尺寸和面-中心尺寸.第1部分:按PN标识的阀门 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves; German version EN 558-1:1995
DIN EN 558-2-1995 工业阀门.带法兰管道中的金属阀门面-面尺寸和面-中心尺寸.第2部分:按级别标识的阀门 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves; German version EN 558-2:1995
DIN EN 561-2002 气焊设备.焊接、切割和相关工艺用与关闭阀的速动连接; 德文版本 EN 561:2002 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes; German version EN 561:2002
DIN EN 593-2004 工业阀门.金属蝶阀 Industrial valves - Metallic butterfly valves; German version EN 593:2004
DIN EN 60534-1-2005 工业过程控制阀.第1部分:控制阀术语和一般条件 Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:2005); German version EN 60534-1:2005
DIN EN 60534-2-1-2000 工业过程控制阀.第2-1部分:流通能力.安装条件下流体流量的校准公式 Industrial-process control valves - Part 2-1: Flow capacity; sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998); German version EN 60534-2-1:1998
DIN EN 60534-2-3-1998 工业加工控制阀.第2-3部分:流量.试验方法 Industrial-process control valves - Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998
DIN EN 60534-2-5-2004 工业过程控制阀.第2-5部分:流通能力.通过有段间恢复能力的多段控制阀门的流体流量的校准公式 Industrial process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003); German version EN 60534-2-5:2003
DIN EN 60534-3-1-2000 工业过程控制阀.第3-1部分:尺寸.法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球形角型控制阀的中心与 Industrial-process control valves - Part 3-1: Dimensions; Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000); German version EN 60534-3-1:2000 + Corrigendum 2000
DIN EN 60534-3-2-2002 工业过程控制阀.第3-2部分:尺寸.无法兰控制阀(薄型蝶阀除外)的端面间距尺寸 Industrial-process control valves - Part 3-2: Dimensions; Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001); German version EN 60534-3-2:2001
DIN EN 60534-3-3-2000 工业过程控制阀.第3-3部分:尺寸.对接焊双通球形、直型控制阀的首尾相接尺寸 Industrial-process control valves - Part 3-3: Dimensions - end-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998); German version EN 60534-3-3:1998
DIN EN 60534-5-2004 工业过程控制阀.第5部分:标记 Industrial-process control valves - Part 5: Marking (IEC 60534-5:2004); German version EN 60534-5:2004
DIN EN 60534-6-1-1998 工业加工用控制阀.第6部分:定位器与控制阀连接的安装细节.第1节:安装在线性作动器上的定位器 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997
DIN EN 60534-6-2-2001 工业过程控制阀.第6-2部分:控制阀定位器安装细则.旋转传动装置上安装的定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators (IEC 60534-6-2:2000); German version EN 60534-6-2:2001
DIN EN 60534-8-1-2006 工业过程控制阀.第8-1部分:噪声的考虑.气动流流经控制阀产生的噪声的实验室测量 Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves (IEC 60534-8-1:2005); German version EN 60534-8-1:2005
DIN EN 60534-8-2-1994 工业过程控制阀.第8部分:噪声.第2节:控制阀液流噪声的实验室测量 Industrial-process control valves; part 8: noise considerations; section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991); German version EN 60534-8-2:1993
DIN EN 60534-8-3-2001 工业过程控制阀.第8-3部分:噪声.控制阀气动噪声预测法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000
DIN EN 60534-8-4-2006 工业过程控制阀.第8-4部分:噪声考虑.气流噪声预测 Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:2005 + Corrigendum 1:2006); German version EN 60534-8-4:2005
DIN EN 60700-1-2004 高压直流(HVDC)输电用晶闸管阀.第1部分:电气试验 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:1998 + A1:2003); German version EN 60700-1:1998 + A1:2003
DIN EN 60730-2-19-2002 家用和类似用途的自动电力控制器.第2-19部分:包括机械要求的电动油阀的特殊要求 (IEC 60730-2-19:1997 + A1 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997 + A1:2000, modified); German version EN 60730-2-19:2002
DIN EN 60730-2-19/A11-2005 家用及类似用途的电自动控制装置.第2-19部分:包括机械要求的电动油阀的特殊要求 Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements; German version EN 60730-2-19:2002/A11:2005
DIN EN 60730-2-8-2004 家用及类似用途的电气自动控制器.第2-8部分:电动水阀的特殊要求(包括机械要求) Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000, modified + A1:2002, modified); German version EN 60730-2-8:2002 + A1:2003
DIN EN 60896-21-2004 固定式铅酸蓄电池.第21部分:阀门调节型.试验方法 Stationary lead-acid batteries - Part 21: Valve regulated types - Methods of test (IEC 60896-21:2004); German version EN 60896-21:2004
DIN EN 60896-22-2004 固定式铅酸蓄电池.第22部分:阀门调节型.要求 Stationary lead-acid batteries - Part 22: Valve regulated types - Requirements (IEC 60896-22:2004); German version EN 60896-22:2004
DIN EN 61056-1-2003 通用铅酸蓄电池组(阀门调节型).第1部分:一般要求、功能特性.试验方法 General purpose lead-acid batteries (valve-regulated types) - Part 1: General requirements, functional characteristics; Methods of test (IEC 61056-1:2002); German version EN 61056-1:2003
DIN EN 61056-2-2003 通用铅酸蓄电池组(阀门调节型).第2部分:尺寸、端子和标记 General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2002); German version EN 61056-2:2003
DIN EN 61514-2-2004 工业过程控制系统.第2部分:带气动输出的智能阀定位器的性能评估方法 Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs (IEC 61514-2:2004); German version EN 61514-2:2004
DIN EN 61514-2002 工业过程控制系统.气动输出阀门定位器性能评价方法 (IEC 61514:2000); 德文版本 EN 61514:2002 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs (IEC 61514:2000); German version EN 61514:2002
DIN EN 61954-2004 输电和配电系统电力电子设备.静态无功功率补偿器用晶闸管阀的试验 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators (IEC 61954:1999 + Corr. 1999 + A1:2003); German version EN 61954:1999 + A1:2003
DIN EN 629-1-1996 可运输煤气罐.煤气罐连结阀用25E锥螺纹.第1部分:规范 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 1: Specification; German version EN 629-1:1996
DIN EN 629-2-1996 可运输煤气罐.煤气罐连结阀用25E锥螺纹.第2部分:量规检验 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection; German version EN 629-2:1996
DIN EN 736-2-1997 阀门.术语.第2部分:阀门元部件定义 Valves - Terminology - Part 2: Definition of components of valves; German version EN 736-2:1997
DIN EN 736-3-2002 阀门.术语.第3部分:术语定义(包括修改件A1) Valves - Terminology - Part 3: Definition of terms (includes Amendment A1:2001); German version EN 736-3:1999 + A1:2001
DIN EN 816-1997 卫生器具附件.自锁阀门PN 10 Sanitary tapware - Automatic shut-off valves PN 10; German version EN 816:1996
DIN EN 917-1997 塑料管道系统.热塑阀门.耐内压和密封性试验方法 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness; German version EN 917:1997
DIN EN 962-2000 移动式气瓶.工业和医疗气体瓶的阀门保护帽和阀盖.设计、制造和试验(包括修改件A1-1999和A2-2000) Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests (included amendment A1:1999 + A2:2000); German version EN 962:1996 + A1:1999 + A2:2000
DIN EN ISO 10297-2006 可运输气瓶.气瓶阀.规范和型式试验 Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2006); German version EN ISO 10297:2006
DIN EN ISO 10417-2005 石油和天然气工业.井下安全阀系统.设计、安装、操作和修整 Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004); English version EN ISO 10417:2004
DIN EN ISO 10432-2005 石油和天然气工业.下降孔设备.地下安全阀设备 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004); English version EN ISO 10432:2004
DIN EN ISO 10434-2005 石油、石油化学和相关工业用螺栓帽状钢闸阀 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2004); German version EN ISO 10434:2004
DIN EN ISO 10497-2004 阀门的测试.防火类型试验要求 Testing of valves - Fire type testing requirements (ISO 10497:2004); German version EN ISO 10497:2004
DIN EN ISO 10524-3-2006 医疗气体用压力调节器.第3部分:带气缸阀的压力调节器(ISO 10524-3:2005) Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005); German version EN ISO 10524-3:2006
DIN EN ISO 10692-1-2003 储气瓶.微电子工业用储气瓶阀接头.第1部分:输出口接头 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 1: Outlet connections (ISO 10692-1:2001); German version EN ISO 10692-1:2001
DIN EN ISO 10692-2-2003 储气瓶.微电子工业用储气瓶阀接头.第2部分:储气瓶阀接头规范和型式试验 Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001
DIN EN ISO 11114-1-1998 可运输气瓶.装有气体的气瓶及其阀门材料的相容性.第1部分:金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997) (includes corrigendum AC:1998); German version EN ISO 11114-1:1997
DIN EN ISO 11114-2-2001 可运输气瓶.气瓶及阀门材料与内装气体的兼容性.第2部分:非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000); German version EN ISO 11114-2:2000
DIN EN ISO 11114-3-1998 可运输气瓶.装有气体的气瓶和阀门材料的兼容性.第3部分:有氧环境中自燃试验 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997) (including corrigendum AC:1998); German version EN ISO 11114-3:1997 + AC:1998
DIN EN ISO 11114-4-2005 移动气瓶.气瓶和瓶阀材料与盛装气体的相容性.第4部分:选择耐氢脆的金属材料的试验方法 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005); German version EN ISO 11114-4:2005
DIN EN ISO 11116-1-2000 移动式气瓶.气瓶.阀门与气瓶连接用17E锥螺纹.第1部分:规范 Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 1: Specification (ISO 11116-1:1999); German version EN ISO 11116-1:1999
DIN EN ISO 11116-2-1999 可运输的气罐.气体罐.阀门与气罐连接的17E 锥型螺纹.第1部分:检验量规 Transportable gas cylinders - Gas cylinders; 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999); German version EN ISO 11116-2:1999
DIN EN ISO 12209-1-2001 储气瓶.压缩可呼吸空气用气瓶阀的放气连接器.第1部分:轭式连接件 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000); German version EN ISO 12209-1:2000
DIN EN ISO 12209-2-2001 储气瓶.压缩可呼吸空气用气瓶阀的放气连接器.第2部分:螺纹式连接件 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000); German version EN ISO 12209-2:2000
DIN EN ISO 12209-3-2001 储气瓶.压缩可呼吸空气用气瓶阀的放气连接器.第2部分:230bar阀门适配器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adapter for 230 bar valves (ISO 12209-3:2000); German version EN ISO 12209-3:2000
DIN EN ISO 13340-2001 可运输气瓶.不可再灌装的气瓶阀门.规范和原型试验 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001); German version EN ISO 13340:2001
DIN EN ISO 13341-1998 可运输储气瓶.阀门和气瓶间的连接 Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997) (including corrigendum AC); German version EN ISO 13341:1997 + AC:1998
DIN EN ISO 13758-1997 液化石油气.丙烷干燥度评估.阀门冻结法 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996); German version EN ISO 13758:1996
DIN EN ISO 14246-2001 可运输气瓶.气瓶阀.生产试验和检验 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001); German version EN ISO 14246:2001
DIN EN ISO 14723-2003 石油和天然气工业.管道输送系统.海底管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001); German and english version EN ISO 14723:2001
DIN EN ISO 15245-1-2003 储气瓶.连接气瓶阀的平行螺纹.第1部分:规范 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 15245-1:2001); German version EN ISO 15245-1:2001
DIN EN ISO 15245-2-2002 储气瓶.连接储气瓶阀门的平行螺纹.第2部分:量规检验 (ISO 15245-2:2001); 德文版本 EN ISO 15245-2:2001 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001); German version EN ISO 15245-2:2001
DIN EN ISO 15364-2002 船舶和航海技术.油轮用压力/真空阀 (ISO 15364:2000); 德文版本 EN ISO 15364:2001 Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000); German version EN ISO 15364:2001
DIN EN ISO 15761-2003 石油和天然气工业用规格为DN 100及更小的钢闸阀、球阀和止回阀 Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text)
DIN EN ISO 15848-1-2006 工业阀.漏气的测量、试验和鉴定程序.第1部分:阀门定型试验的分类系统和鉴定程序 Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2006); German version EN ISO 15848-1:2006
DIN EN ISO 15996-2005 气瓶.残余压力阀门.一般要求和型式试验 Gas cylinders - Residual pressure valves - General requirements and type testing (ISO 15996:2005); German version EN ISO 15996:2005
DIN EN ISO 16135-2006 工业阀.热塑性材料的球闸阀 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006
DIN EN ISO 16136-2006 工业阀.热塑性材料的蝶阀 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006); German version EN ISO 16136:2006
DIN EN ISO 16137-2006 工业阀.热塑性材料的止回阀 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006); German version EN ISO 16137:2006
DIN EN ISO 16138-2006 工业阀.热塑性材料的球阀 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006
DIN EN ISO 16139-2006 工业阀.热塑性材料的门阀 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006); German version EN ISO 16139:2006
DIN EN ISO 17292-2004 石油、石油化学和相关工业用金属球阀 Metal ball valves for petroleum, petrochemical and allied industries (ISO 17292:2004); German version EN ISO 17292:2004
DIN EN ISO 21787-2006 工业阀.热塑性材料的球形阀 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006); German version EN ISO 21787:2006
DIN EN ISO 407-2005 小型医用气瓶.针导轭式阀连接 Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2004); German version EN ISO 407:2004
DIN EN ISO 4126-1-2004 过压保护安全设备.第1部分:安全阀 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004); German version EN ISO 4126-1:2004
DIN EN ISO 4126-3-2006 过压保护安全设备.第3部分:组合中防爆板安全设备和安全阀 Safety devices for protection against exessive pressure - Part 3: Safety valves and bursting disc safety devices in combination (ISO 4126-3:2006); German version EN ISO 4126-3:2006
DIN EN ISO 4126-4-2004 过压保护安全设备.第4部分:安全操作导阀 Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004); German version EN ISO 4126-4:2004
DIN EN ISO 5135-1999 声学.采用在混响室测量方法测定航空终点站装置、航空终点站设备、消音器和阀门发出的噪音的声功率水平 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997); German version EN ISO 5135:1998
DIN EN ISO 5210-1996 工业阀门.多圈旋转阀门驱动器附件 Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991); German version EN ISO 5210:1996
DIN EN ISO 5211-2001 工业阀门.单圈旋转型阀门驱动器附件 Industrial valves - Part-turn actuator attachments (ISO 5211:2001); German version EN ISO 5211:2001
DIN EN ISO 9093-1-1998 小型船舶.船底阀和船体外壳管接头.第1部分:金属件 Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994); German version EN ISO 9093-1:1997
DIN IEC 60534-2-4-1990 工业过程控制阀.第2部分:流动能力.第4节:内在流动特性线和调节比例关系 Industrial-process control valves; flow capacity; inherent flow characteristics and rangeability; identical with IEC 60534-2-4:1989
DIN IEC 60534-7-1992 工业过程控制阀.第7部分:.数据表 Industrial process control valves; control valve data sheet; identical with IEC 60534-7:1989
DIN IEC 61148-1994 阀器件堆和组合装置及电力变流设备的端子标记 Terminal markings for valve device stacks and assemblies and for power convertor equipment; identical with IEC 61148:1992
DIN ISO 11727-2003 气压传动.控制阀和其他元件的气口和控制机构的标识 Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components (ISO 11727:1999)
DIN ISO 1204-1994 往复式内燃机.旋转方向和气缸标识、气缸头阀门、直列式发动机右侧和左测定义及在发动机上的位置 Reciprocating internal combustion engines - Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
DIN ISO 12238-2005 液压传动.方向控制阀门.移动时间测量(ISO 12238-2001) Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001)
DIN ISO 15407-1-2003 气压传动.五气口方向控制阀、规格18mm和26mm.第1部分:无电气接头的安装面 Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO 15407-1:2000)
DIN ISO 4010-1978 道路车辆.延迟针阀式标定喷嘴 Calibrating Nozzle, Delay Pintle Type
DIN ISO 5599-1-2005 气压传动.五气口方向控制阀.第1部分:不带电接头的安装面 Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector (ISO 5599-1:2001)
DIN ISO 6553-1981 自动蒸气阀.标记 Automatic steam traps; marking
DIN ISO 7368-1994 液压流体动力.两通口筒形插入阀.阀腔 Hydraulic fluid power; two-port slip-in cartridge valves; cavities; identical with ISO 7368:1989
DIN ISO 7967-3-1993 往复式内燃机.零部件和系统词汇.阀门、凸轮轴和传动机构 Reciprocating internal combustion engines; vocabulary of components and systems; valves, camshaft drive and actuating mechanisms; identical with ISO 7967-3:1987
DIN V 19259-2-1999 装置的文件.阀门的相关分类的标准数据元类型 Documentation of devices - Standard data element types with associated classification for valves
DIN V 3838-2003 加热装置用阀.有外螺纹管G 3/4 A和内部锥体的可拆卸连接 Valves for heating installations - Detachable connection with outside threaded pipe G 3/4 A and inside cone
编号中文名称英文名称

返回