欧洲阀标准(EN valve standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
编号中文名称英文名称
EN 10090-1998 内燃机阀门用钢和合金 Valve steels and alloys for internal combustion engines
EN 1074-1-2000 供水阀门 目的要求的适应性和合适的认证试验 第1部分：一般要求 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements
EN 1074-2-2000 供水阀门 目的要求的适应性和合适的认证试验 第2部分：绝热阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves
EN 1074-3-2000 供水阀门 目的要求的适应性和合适的认证试验 第3部分：检查阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves
EN 1074-4-2000 供水阀门 目的要求的适应性和合适的认证试验 第4部分：气体阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves
EN 1074-5-2001 供水阀门 目的要求的适应性和合适的认证试验 第5部分：控制阀门 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves
EN 1092-1-2001 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第1部分：钢法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
EN 1092-2-1997 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第2部分：铸铁法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
EN 1092-3-2003 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第3部分：铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories PN designated - Part 3: Copper alloy flanges
EN 1092-4-2002 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第4部分：铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
EN 1111-1998 卫生水龙头 温度调节用混合阀（PN10） 一般技术规范 Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification
EN 1171-2002 工业阀门 铸铁闸门阀 Industrial valves - Cast iron gate valves
EN 12050-4-2000 建筑物和施工现场的废水抽取设备　施工原则和试验　第4部分：用于含粪便和不含粪便断线的单向阀 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Non-return valves for faecal-free wastewater and wastewater containing faecal matter
EN 12094-13-2001+AC-2002 固定式消防系统　气体灭火系统的部件　第13部分：对止回阀和非回流阀的要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves
EN 12094-5-2000 固定式消防系统　气体灭火系统的部件　第5部分：高、低压选择阀及其CO2系统驱动器触发要求及试验方法 Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO<(Index)2> systems
EN 12100-1997 塑料管道系统　聚乙稀(PE)阀门　支架间抗弯曲性的试验方法 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports
EN 12107-1997 塑料管道系统　压注热塑管件、阀门和辅助设备　管道组件压注用热塑 材料的长期液压强度的测定 Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components
EN 12117-1997 塑料管道系统　热塑管件、阀门和配件　气流速率/压降之间关系的测定 Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships
EN 12119-1997 塑料管道系统　聚乙烯(PE)阀门　抗热循环测试方法 Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
EN 1213-1999 建筑物阀门 建筑物内便携式供水用的铜合金断流阀 试验和要求 Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements
EN 12201-4-2001 供水系统用塑料管道系统　聚乙烯（PE）　第4部分：阀门 Plastics piping systems for water supply - Polyethylene (PE) - Part 4: Valves
EN 12259-2-1999 固定消防系统　喷水器和喷水系统构件　第2部分：湿式报警阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2: Wet alarm valve assemblies
EN 12259-3-2000+A1-2001 固定消防系统　喷水器和喷水系统构件　第3部分：干式报警阀组件 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3: Dry alarm valve assemblies
EN 12266-1-2003 工业阀门　阀门试验　第1部分：压力试验、试验程序和验收标准、强制要求 Industrial valves - Testing of valves - Part 1: Pressure tests, test procedures and acceptance criteria; Mandatory requirements
EN 12266-2-2002 工业阀门　阀门试验　第2部分：试验、试验程序和验收标准 补充要求 Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements
EN 12284-2003 制冷系统和加热泵　阀门　要求、试验和标志 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
EN 12288-2003 工业用阀 铜合金闸阀 Industrial valves - Copper alloy gate valves
EN 12334-2001 工业阀门　铸铁止回阀　 Industrial valves - Cast iron check valves
EN 12351-1999 工业阀门　带法兰连接的阀门保护帽 Industrial valves - Protective caps for valves with flanged connections
EN 12380-2002 排水系统用进气阀　要求、试验方法和合格评定 Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity
EN 12514-2-2000 燃油炉供油系统用的装置　第２部分：安全要求和试验　零部件、阀门、管道、滤油器、油气分离器、油量指示表 Installations for oil supply systems for oil burners - Part 2: Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters
EN 12516-3-2002+AC-2003 工业阀门　壳体设计强度　第３部分：试验方法 Valves - Shell design strength - Part 3: Experimental method
EN 12541-2002 卫生间水龙头 压力冲洗阀和自动关闭小便池冲洗阀PN10 Sanitary tapware - Pressure flushing valves und automatic closing urinal valves PN 10
EN 12567-2000 工业阀门　LNG隔离阀　适用性规范和适当检验测试 Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests
EN 12569-1999+AC-2000 工业阀门　化工和石油化学工业用阀门　要求和试验 Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests
EN 12570-2000 工业阀门　操作元件分级方法 Industrial valves - Method for sizing the operating element
EN 12627-1999 工业阀门　钢阀门的对焊端头 Industrial valves - Butt welding ends for steels valves
EN 1267-1999 阀门 用水作为试验流体的阻流试验 Valves - Test of flow resistance using water as test fluid
EN 12760-1999 阀门 钢阀门套接焊接端 Valves - Socket welding ends for steel valves
EN 1286-1999 卫生间泄水器 低压机械混合阀 通用技术规范 Sanitary tapware - Low pressure mechanical mixing valves - General technical specification
EN 1287-1999 卫生间泄水器 低压恒温混合阀 通用技术规范 Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications
EN 12982-2000 工业阀门 对接焊端阀端面至端面以及中心至端面的尺寸 Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves
EN 13082-2001 危险品运输罐 罐辅助设备 蒸汽输送阀 Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
EN 13152-2001+A1-2003 液化石油气瓶阀规范和测试 自动关闭阀 Specification and testing of LPG cylinder valves - Self closing
EN 13153-2001+A1-2003 液化石油气瓶阀规范和测试 手工操作阀 Specification and testing of LPG cylinder valves - Manually operated
EN 13175-2003 液化石油气（LPG）管阀门和装配的规范和试验 Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
EN 13244-4-2002 地上和地下给排水和污水压力系统用塑料管道 聚已烯（PE） 第4部分：阀门 Plastics piping systems for buried and above-ground pressure systems for water of general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves
EN 13308-2002 危险品运输罐 罐辅助设备 非压力平衡底阀 Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve
EN 13312-5-2001 生物技术 管道和仪器性能标准 第5部分：阀 Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves
EN 13316-2002 危险品运输罐 罐辅助设备 压力平衡底阀 Tanks for transporting dangerous goods - Service for tanks - Pressure balanced footvalve
EN 13397-2001 工业阀门 金属材料制成的隔膜阀 Industrial valves - Diaphragm valves made of metallic materials
EN 1349-2000+AC-2001 工业加工控制阀门 Industrial process control valves
EN 13648-1-2002 低温容器 抗过压保护安全设备 第1部分：低温服务用安全阀 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
EN 1366-2-1999 服务设施的耐火试验 第2部分：防火阀 Fire resistance tests for service installations - Part 2: Fire dampers
EN 13709-2002 工业阀门 钢球和球止回阀 Industrial valves - Steel globe and globe stop and check valves
EN 13774-2003 最大工作压力小于或等于16 bar的气体分配系统用阀门 性能要求 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
EN 13789-2002 工业阀门 铸铁球阀 Industrial valves - Cast iron globe valves
EN 13792-2002 实验室中使用的龙头和阀门的色码 Colour coding of taps and valves for use in laboratories
EN 13828-2003 建筑物阀门 建筑物中饮用水供水用手动铜合金及不锈钢球阀 试验和要求 Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Test and requirements
EN 13942-2003 石油和天然气工业　管道运输系统　管道阀门 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves (ISO 14313:1999, modified)
EN 13953-2003 液化石油气（LPG）用可运输、可再装油缸卸压阀 Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG)
EN 14189-2003 可运输气瓶 气瓶定期检查时对瓶阀的检查和维护 Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders
EN 144-1-2000+A1-2003 呼吸保护装置 气瓶阀 第1部分：插入式连接器用螺纹连接 Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for insert connector
EN 144-2-1998 呼吸保护装置 气瓶阀 第2部分：出口连接 Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections
EN 144-3-2003 呼吸保护装置 气瓶阀 第3部分：潜水气体硝基氧和氧气的出口连接 Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen
EN 1452-4-1999 供水塑料管道系统 硬聚氯乙烯(PVC-U) 第4部分：阀门和附属设备 Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment
EN 1487-2000 建筑阀门 水压的安全类 试验和要求 Building valves - Hydraulic safety groups - Tests and requirements
EN 1488-2000 建筑阀门 膨胀类 试验和要求 Building valves - Expansion groups - Tests and requirements
EN 1489-2000 建筑阀门 压力安全阀门 试验和要求 Building valves - Pressure safety valves - Tests and requirements
EN 1490-2000 建筑阀门 兼有温度及卸压的组合阀 试验和要求 Building valves - Combined temperature and pressure relief valves - Tests and requirements
EN 1491-2000 建筑筏门 膨胀阀 试验和要求 Building valves - Expansion valves - Tests and requirements
EN 1503-1-2000 阀门 阀体、阀帽和阀套用材料 第1部分：欧洲标准中规定的钢材 Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
EN 1503-2-2000 阀门 阀体、阀帽和阀套用材料 第2部分：非欧洲标准规定的钢材 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
EN 1503-3-2000+AC-2001 阀门 阀体、阀帽和罩阀套用材料 第3部分：欧洲标准规定的铸铁 Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards
EN 1503-4-2002 阀门 阀体、阀帽和阀套用材料 第3部分：欧洲标准规定的铜合金 Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
EN 1555-4-2002 供给气体燃料用塑料管道系统 聚已烯(PE) 第4部分：阀门 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves
EN 1567-1999 建筑阀门 减水压阀门和组合减水压阀门 要求和试验 Building valves - Water pressure reducing valves and combination water pressure reducing valves - Requirements and tests
EN 161-2001 气体燃烧器和燃气器具自动关闭阀 Automatic shut-off valves for gas burners and gas appliances
EN 1626-1999 低温容器 低温设备用阀门 Cryogenic vessels - Valves for cryogenic service
EN 1643-2000 气体燃烧器和气体设备自动关闭阀门的阀门检验系统 Valve proving systems for automatic shut-off valves for gas burners and gas appliances
EN 1680-1997 塑料管道系统 聚乙烯(PE)管道系统用阀门 传动装置的弯曲时和弯曲后密封性的试验方法 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
EN 1704-1997 塑料管道系统 热塑阀门 弯曲情况下温度周期变化后阀门完整性的试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending
EN 1705-1996 塑料管道系统 热塑阀门 外部鼓风后阀门完整性试验方法 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
EN 1751-1998 建筑物通风 气路终端设备 阀与阀门的气动试验 Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves
EN 1759-3-2003 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第2部分：铜合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges
EN 1759-4-2003 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第4部分：铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
EN 1827-1999 呼吸保护装置 防止气体或气体和微粒或仅防颗粒的无吸入阀和带可分离过滤器的半掩面罩 要求、试验和标记 Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking
EN 19-2002 工业阀门 金属阀门的标志 Industrial valves - Marking of metallic valves
EN 1984-2000 工业阀门 钢制阀门 Industrial valves - Steel gate valves
EN 215-1-1987+AC1-1987 恒温散热阀 第1部分：要求和试验方法 Thermostatic radiator valves; Part 1: Requirements and test methods
EN 26189-1991 声学 用于听力保护的纯音气导阀听力测定 Acoustics; pure tone air conduction threshold audiometry for hearing conservation purposes (identical with ISO 6189:1983)
EN 26553-1991 自动蒸汽疏水阀 标志 Automatic steam traps-Marking (ISO 6553:1980)
EN 26554-1991 法兰连接自动蒸汽疏水阀 结构长度 Flanged automatic steam traps-Face-to-face dimensions (ISO 6554:1980)
EN 26704-1991 自动蒸汽疏水阀 分类 Automatic steam traps-Classification (ISO 6704:1982)
EN 26948-1991 自动蒸气疏水阀 产品试验和工作特性试验 Automatic steam traps-Production and performance characteristic tests (ISO 6948:1981)
EN 27841-1991 自动蒸汽疏水阀门 漏气量的测定 Automatic steam traps-Determination of steam loss- Test methods (ISO 7841:1988)
EN 27842-1991 自动蒸汽疏水阀门 排水量的测定 Automatic steam traps- Determination of discharge capacity- Test methods (ISO 7842:1988)
EN 28233-1990 热塑性塑料阀门 扭矩 试验方法 Thermoplastics valves- Torque; test method (ISO 8233:1988)
EN 28659-1990 热塑性塑料阀门 疲劳强度 试验方法 Thermoplastic valves- Fatigue strength- Test method (ISO 8659:1989)
EN 331-1998 建筑物燃气设备用人工操纵球阀和封闭底锥形旋塞阀 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
EN 405-2001 呼吸保护设备 防气体或防气体和颗粒的阀滤式半面罩 要求、测试和标志 Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking
EN 417-2003 用于便携式灶具的、带或不带阀门的液化石油气用一次性金属气筒 制作、检验、测试和标志 Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking
EN 45510-7-1-1999 发电站设备、设备和系统的采购指南 第7-1部分：管道系统和阀门 高压管道系统 Guide for procurement of power station plant, equipment, and systems - Part 7-1: Pipework and valves - High pressure piping systems
EN 45510-7-2-1999 发电站设备、设备和系统的采购指南 第7-2部分：管道系统和阀门 锅炉和高压管道阀 Guide for procurement of power station plant, equipment, and systems - Part 7-2: Pipework and valves - Boiler and high pressure piping valves
EN 488-2003 热水分配管道 地下热水网用预先绝热包覆的管道系统 成套钢铁管道设备的管阀门组件、聚氨酯热绝缘和聚乙 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN 558-1-1995 工业阀门 法兰管系统使用的金属阀门面面间和中心与面间的尺寸 第1部分：PN标记的阀门 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 1: PN-designated valves
EN 558-2-1995 工业阀门 法兰管系统使用的金属阀门面面间和中心与面间的尺寸 第2部分：级别标记的阀门 Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Part 2: Class-designated valves
EN 561-2002 气焊设备 焊接、切割和同类处理用断路阀门快速连接器 Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes
EN 593-1998 工业阀门 金属蝶阀 Industrial valves - Metallic butterfly valves
EN 60099-1-1994+A1-1999 避雷器　第1部分：交流系统用有间隙阀式避雷器　 Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems (IEC 60099-1:1991)
EN 60534-1-1993 工业过程控制阀　第1部分　控制阀术语和一般考虑 Industrial-process control valves - Part 1: Control valve terminology and general considerations (IEC 60534-1:1987)
EN 60534-2-1-1998 工业过程控制阀　第2－1部分：流通能力　安装条件下流体流量的校准公式 Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions (IEC 60534-2-1:1998)
EN 60534-2-3-1998 工业过程控制阀　第２部分：流通能力　第３节：试验规程 Industrial-process control valves - Part 2-3: Flow capacity - Test procedures (IEC 60534-2-3:1997)
EN 60534-2-5-2003 工业加工控制阀　第2-5部分：流量　 通过带级间恢复多级控制阀的流体尺寸方程　 Industrial-process control valves - Part 2-5: Flow capacity; Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003) / Note: Endorsement notice
EN 60534-3-1-2000 工业过程控制阀　第３－１部分：尺寸　法兰双通球形直型控制阀的端面间距尺寸和有法兰双通球型角型控制阀的 Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves (IEC 60534-3-1:2000)
EN 60534-3-2-2001 工业过程控制阀　第３部分：尺寸　第２节：无法兰控制阀（薄型蝶阀除外）的端面间距尺寸 Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves (IEC 60534-3-2:2001)
EN 60534-3-3-1998 工业过程控制阀　第三部分：尺寸　对接焊接　两向　球型　垂直模式控制阀的末端对末端尺寸 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves (IEC 60534-3-3:1998)
EN 60534-6-1-1997 工业过程控制阀　第6－1部分：定位器联到控制阀执行机构的安装细则　第1节：直线传动装置上调节器的安装 Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators (IEC 60534-6-1:1997)
EN 60534-6-2-2001 工业过程控制阀　第6－2部分：定位器联到控制阀执行机构的安装细则　环形执行机构定位器 Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves; Positioner mounting on rotary actuators (IEC 60534-6-2:2000)
EN 60534-8-1-2000 工业过程控制阀　第8部分：噪声的考虑　第1节：气动流流径控制阀产生的噪声的实验室测量 Industrial-process control valves - Part 8: Noise consideration; Section 1: Laboratory measurement of noise generated by hydrodynamic aerodynamic flow through control valves (IEC 60534-8-1:1986)
EN 60534-8-2-1993 工业过程控制阀　第8部分　噪声考虑　第2节通过控制阀的流体产生的噪声的实验室测量报法 Industrial-process control valves- Part 8: noise consideration- Section 2: laboratory measurement of noise generated by hydrodynamic flow through control valves (IEC 60534-8-2:1991)
EN 60534-8-3-2000 工业流程控制阀　.第8-3部分　噪声问题　通过控制阀的动力噪声预测法 Industrial-process control valves - Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000)
EN 60534-8-4-1994 工业过程控制阀　第8部分：噪声问题　第4节：流动产生的噪声的预测 Industrial-process control valves - Part 8: Noise considerations - Section 4: Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:1994)
EN 60700-1-1998+A12003 高压直流(HVDC)电力传输半导体闸流阀　第1部分：电气试验 Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:1998)
EN 60730-2-19-2002 家用和类似用途的电气自动化控制器 2-19部分：电动油阀的特殊要求（包括机械要求） Automatic electric controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements (IEC 60730-2-19:1997 + A1:2000, modified)
EN 60730-2-8-2002 家用和类似用途的电气自动控制器　 第２－８部分：电动水阀的特殊要求　包括机械要求 Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (IEC 60730-2-8:2000, modified) / Note: Endorsement notice
EN 60896-2-1996 固定式铅酸蓄电池　一般要求和试验方法　第2部分：阀门调节型 Stationary lead-acid batteries - General requirements and methods of test - Part 2: Valve regulated types (IEC 60896-2:1995)
EN 61056-1-2003 一般用铅酸蓄电池(阀调节型)　第1部分：一般要求、功能特性　试验方法 General purpose lead-acid batteries (valve regulated types) - Part 1: General requirements, functional characteristics, methods of test (IEC 61056-1:2002) / Note: Endorsement notice
EN 61056-2-2003 一般用铅酸蓄电池(阀调节型)　第2部分：尺寸、端子和标记 General purpose lead-acid batteries (valve regulated types) - Part 2: Dimensions, terminals and marking (IEC 61056-2:2002) / Note: Endorsement notice
EN 61514-2002 工业过程控制系统　气动输出阀门定位器性能评定方法 Industrial-process controll systems - Methods of evaluating the performance of valve positioners with pneumatic outputs (IEC 61514:2000, modified)
EN 61954-1999+A1-2003 输电和配电系统用电力电子设备　静态无功功率补偿器用晶闸管阀的试验 Power electronics for electrical transmission and distribution systems - Testing of thyristor valves for static VAR compensators (IEC 61954:1999)
EN 629-1-1996 可运输气瓶 连接气瓶阀门用的25E锥螺纹 第1部分：规范 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 1: Specification
EN 629-2-1996 可运输气瓶 连接气瓶阀门的25E锥螺纹 第2部分：量规检验 Transportable gas cylinders - 25E taper thread for connection of valves to gas cylinders - Part 2: Gauge inspection
EN 736-1-1995 阀门 术语 第1部分：阀门类型定义 Valves - Terminology - Part 1: Definition of types of valves
EN 736-2-1997 阀门 术语 第2部分：阀门组件定义 Valves - Terminology - Part 2: Definition of components of valves
EN 736-3-1999+A1-2001 阀门 术语 第3部分：术语定义 Valves - Terminology - Part 3: Definition of terms
EN 738-3-1998+A1-2002 医用气体用压力调节器 第3部分：带气瓶阀的压力调节器 Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves
EN 816-1996 卫生间水开关制品 自动切断阀PN 10 Sanitary tapware - Automatic shut-off valves PN 10
EN 849-1996+A1-1999+A2-2001 可移动气瓶 气瓶阀 规范和定型测试 Transportable gas cylinders - Cylinder valves - Specification and type testing
EN 850-1996+A1-2000+AC-1998 可移动气瓶 医用枢接轭状阀门出口接头 Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use
EN 88-1991+A1-1996 入口压力200毫巴以下的燃气器具的压力调节阀 Pressure governors for gas appliances for inlet pressures up to 200 mbar
EN 88/prA2-2001 入口压力200毫巴以下的燃气器具的压力调节阀 修改A2 Pressure governors for gas appliances for inlet pressures up to 200 mbar; Amendment prA2
EN 917-1997 塑料管系统 热塑阀门 抗内压和泄漏密封性的试验方法 Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness
EN 962-1996+A1-1999+A2-2000 可运输气瓶 工业和医用气瓶用阀保护帽和阀罩 设计、建造和试验 Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
EN ISO 10432-1999 石油和天然气工业　下降孔设备　地下安全阀设备 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999)
EN ISO 10692-1-2001 气瓶　微电子工业用气瓶阀接头　第1部分：出口接头 Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001)
EN ISO 10692-2-2001 气瓶　微电子工业用气瓶阀接头　第2部分：气瓶阀接头的规范和定型试验 Gas cylinders - Gas cylinder valve connections for use in microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001)
EN ISO 11114-1-1997+AC-1998 可运输气瓶　气瓶和瓶阀材料与盛装气体的相容性　第1部分：金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:1997)
EN ISO 11114-2-2000 可运输气瓶　气瓶和瓶阀材料与盛装气体的相容性　第2部分：非金属材料 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2000)
EN ISO 11114-3-1997 可运输气瓶　气瓶和瓶阀材料与盛装气体的相容性　第3部分：氧环境中自燃试验 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test in oxygen atmosphere (ISO 11114-3:1997)
EN ISO 11116-1-1999 气瓶　气瓶与瓶阀连接用17E锥螺纹　第1部分：规范 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 1: Specifications (ISO 11116-1:1999)
EN ISO 11116-2-1999 气瓶　气瓶与瓶阀连接用17E锥螺纹　第2部分：检验量规 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Part 2: Inspection gauges (ISO 11116-2:1999)
EN ISO 12209-1-2000 气瓶　压缩可呼吸空气用气瓶阀的放气连接器　第1部分：轭型连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000)
EN ISO 12209-2-2000 气瓶　压缩可呼吸空气用气瓶阀的放气连接器　第2部分：螺纹式连接器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000)
EN ISO 12209-3-2000 气瓶　压缩可呼吸空气用气瓶阀的放气连接器　第3部分：230 bar 阀适配器 Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adaptor for 230 bar valves (ISO 12209-3:2000)
EN ISO 13340-2001 可运输气瓶　不可再充填的气瓶用瓶阀　规范和原型试验 Transportable gas cylinders - Cylinder valves for non-refillable cylinders - Specification and prototype testing (ISO 13340:2001)
EN ISO 13341-1997+AC-1998 可运输气瓶　气瓶阀的装配 Transportable gas cylinders - Fitting of valves to gas cylinders (ISO 13341:1997)
EN ISO 13758-1996 液化石油气　评价丙烷干燥度　阀冻结法 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method (ISO 13758:1996)
EN ISO 14246-2001 可运输气瓶　气瓶阀门　生产试验和检验 Transportable gas cylinders - Gas cylinder valves - Manufacturing tests and inspections (ISO 14246:2001)
EN ISO 14723-2001 石油和天然气工业　管道输送系统　海底管道阀 Petroleum and natural gas industries - Pipeline transportation systems - Subsea pipeline valves (ISO 14723:2001)
EN ISO 15245-1-2001 气瓶　连接气瓶阀门的平行螺纹　第1部分：规范 Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 1: Specification (ISO 15245-1:2001)
EN ISO 15245-2-2001 气瓶　连接气瓶阀门的平行螺纹　第2部分：量规检验 Gas cylinders - Parallel threads for correction of valves to gas cylinders - Part 2: Gauge inspection (ISO 15245-2:2001)
EN ISO 15364-2001 船舶与海上技术　散货船真空/压力阀 Ships and marine technology - Pressure/vacuum valves for cargo tanks (ISO 15364:2000)
EN ISO 15761-2002 石油及天然气工业用DN100及较小的钢闸阀 、球阀和防逆阀　 Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002)
EN ISO 3822-2-1995 声学　供水设施的装置和设备发射的噪音的实验室测定　第2部分：放水龙头和混合阀的安装和工作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves (ISO 3822-2:1995)
EN ISO 3822-3-1997 声学　供水设施的装置和设备发射的噪音的实验室测定　第3部分：管路阀门和器件的安装和工作条件 Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for in-line valves and appliances
EN ISO 5135-1998 声学　在混响室中测定空调终端设备、空调终端单元、阻尼器和调节阀门的噪声功率级 Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)
EN ISO 5210-1996 通用阀门　多回转阀门驱动装置的连接 Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991)
EN ISO 5211-2001 通用阀门　转动零件的激励附件 Industrial valves - Part-turn actuator attachments (ISO 5211:2001)
HD 1215.2-1988+AC1-1989 热静力散热器阀门　第2部分：尺寸和连接细节 Thermostatic radiator valves; part 2: dimensions and details on connection
prEN 1074-6-2003 供水阀门 目的要求的适应性和合适的认证试验 第6部分：消防栓 Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants
prEN 12094-4-2001 固定式消防系统　气体灭火系统的部件　第4部分：对高压容器阀组件及其驱动器的要求及试验方法 Fixed fire fighting systems - Components for gas extinguishing systems - Part 4: Requirements and test methods for high pressure container valve assemblies and their actuators
prEN 12116-1995 工业阀门　部分回流阀驱动附件 Industrial valves - Part-turn valve actuator attachment
prEN 12259-9-1999 固定消防系统　喷水器和喷水系统构件　第9部分：集水阀 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 9: Deluge valves
prEN 12266-3-1995 工业阀门　交货技术条件　第3部分：试验程序和验收标准 Industrial valves - Technical conditions of delivery - Part 3: Test procedures and acceptance criteria
prEN 12516-1-2000 工业阀门　壳体设计强度　第1部分：钢阀门壳体的列表法 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
prEN 12516-2-2000 工业阀门　壳体设计强度　第２部分：钢阀门壳体的计算法 Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells
prEN 13327-1998 工业阀门 热塑性材料止回阀 Industrial valves - Check valves of thermoplastics materials
prEN 13547-2002 工业阀门 铜合金球阀 Industrial valves - Copper alloy ball valves
prEN 13617-3-2000 加油站 第3部分：剪切阀构造和性能 Petrol filling stations - Part 3: Construction and performance of shear valves
prEN 13786-1999 用于丁烷、丙烷或其混和物的、最大出口压力小于等于4bar的、流量最大可达100kg/h（包括100kg/h）的自动转换 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
prEN 13959-2000 公称压力在DN6至DN250（含DN250）的防污染控制阀　E族A、B、C和D型 Anti-pollution check valves DN 6 to DN 250 inclusive - Family E, type A, B, C and D
prEN 14055-1-2000 公厕冲洗池　第1部分：带内溢流和阀门排水口装置的冲洗池 WC flushing cisterns - Part 1: Flushing cisterns with internal overflow and valve outlet mechanism
prEN 14071-2000 液化石油气（LPG）罐的减压阀　辅助设备 Pressure relief valves for LPG tanks - Ancillary equipment
prEN 14124-2001 有内溢流的冲洗池的进水阀 Inlet valves for flushing cisterns with internal overflow
prEN 14129-2001 液化石油汽（LGP）罐压力调节阀 Pressure relief valves for LPG tanks
prEN 14141-2003 天然气管道输送阀 试验和性能要求 Valves for natural gas transportation in pipelines - Performance requirements and tests
prEN 14341-2001 工业阀 钢防逆阀 Industrial valves - Steel check valves
prEN 14432-2002 危险货物运输罐 液态化工产品运输的罐设备 产品排放和进气阀 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves
prEN 14433-2002 危险货物运输罐 液态化工产品运输的罐设备 底阀 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Footvalves
prEN 14451-2002 饮用水的防回流污染装置 包括公称压力在DN8-DN80内的管路反压阀 D族 A型 Devices to prevent pollution by backflow of potable water - In-line anti-vacuum valves DN 8 to DN 80 inclusive - Family D, type A
prEN 14455-2002 饮用水的防回流污染装置 包括公称压力在DN15-DN50内的压缩空气进气阀 L族 A型和B型 Devices to prevent pollution by backflow of potable water - Pressurised air inlet valves DN 15 to DN 50 inclusive - Family L, type A and type B
prEN 1456-4-1994 地上和地下污废水压力排放用塑料管道系统 硬已烯(聚氯已烯)(PVC-U) 第4部分：阀门及辅助设备 Plastics piping systems for underground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 4: Valves and ancillary equipment
prEN 1531-1994 包括启动气阀的调节气阀 Modulating gas valves including start gas valves
prEN 1759-1-2000 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第1部分：钢法兰NPS1/2到24 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 1: Steel flanges, NPS 1/2 to 24
prEN 1983-2002 工业钢球阀 Industrial valves - Steel ball valves
prEN 215-2-1986 恒温散热阀 第2部分：连接尺寸和细节 Thermostatic radiator valves; part 2: dimensions and details on connection
prEN 332-1990 压力不超过PN 0,2 和压力为DN 15 至DN 50间的家用气体装置用封闭底人工操纵金属锥形旋塞关闭阀 Manually operated metallic taper plug shut-off valves with closed bottom for domestic gas installations for pressures up to PN 0,2 and with DN 15 to DN 50
prEN 333-1990 压力不超过PN 4 和压力为DN 15 至DN 50间的家用气体装置用人工操纵金属球关闭阀 Manually operated metallic ball shut-off valves for domestic gas installations up to PN 4 and with DN 15 to DN 50
prEN 45511-1994 采购指南 电气设备阀 开关设备和控制装置 Guide for procurement - Electrical equipment - Switchgear and controlgear
prEN 45512-1994 采购指南 管道系统和阀 包括安全阀的锅炉和高压管道阀 Guide for procurement - Pipework and valves - Boiler and high pressure piping valves including safety valves
prEN 45513-1994 采购指南 管道系统和阀 包括支架的高压管线 Guide for procurement - Pipework and valves - High pressure piping including supports
prEN 50105-1992 固定式铅酸蓄电池组　一般要求和试验方法　阀门调节类型 Stationary lead-acid batteries; general requirements and test methods; valve regulated types
prEN 558-3-1991 法兰管系统使用的金属阀门 面面间和中心与面间的尺寸 第3部分：级别标记的阀门 Metal valves for use in flanged pipe systems; face-to-face and centre-to-face dimensions; part 3: class-designation valves
prEN 593-2003 工业阀门 金属蝶阀 Industrial valves - Metallic butterfly valves / Note: Intended as replacement for EN 593 (1998-01).
prEN 60534-4-1998 工业过程控制阀　第４部分：检验和常规试验　草案 IEC 60534-4: Industrial-process control valves - Part 4: Inspection and routine testing
prEN 628-1992 气瓶 连接25.8mm公称直径气瓶阀门用的锥形螺纹量规检测要求 Gas cylinders; requirements for gauge inspection of tapered threads for connection of valves to gas cylinders of 25.8 mm nominal diameter
prEN ISO 10297-2002 可运输的气瓶　阀门　规范及定型试验 Transportable gas cylinders - Cylinder valves - Specification and type testing (ISO/DIS 10297:2002)
prEN ISO 10434-2002 石油和天然气工业用螺栓帽状钢闸阀 Bolted bonnet steel gate valves for petroleum and natural gas industries (ISO/DIS 10434:2002)
prEN ISO 10497-2002 阀门试验　阀门耐火试验要求　 Testing of valves - Fire type-testing requirements (ISO/DIS 10497:2002)
prEN ISO 11219-1996 气瓶　气瓶与瓶阀连接用17E锥螺纹　检验量规 Gas cylinders - 17E taper thread for connection of valves to gas cylinders - Inspection gauges (ISO/DIS 11219:1996)
prEN ISO 14617-8-2002 图表用图形符号　第8部分：阀及挡板 Graphical symbols for diagrams - Part 8: Valves and dampers (ISO/FDIS 14617-8:2002)
prEN ISO 16135-2001 工业用阀门　热塑性材料制球阀 Industrial valves - Ball valves of thermoplastic materials (ISO/DIS 16135:2001)
prEN ISO 16136-2001 工业用阀门　热塑性材料制蝶阀 Industrial valves - Butterfly valves of thermoplastic materials (ISO/DIS 16136:2001)
prEN ISO 16137-2001 工业用阀门　热塑性材料制防逆阀 Industrial valves - Check valves of thermoplastic materials (ISO/DIS 16137:2001)
prEN ISO 16138-2001 工业用阀门　热塑性材料制隔膜阀 Industrial valves - Diaphragm valves of thermoplastic materials (ISO/DIS 16138:2001)
prEN ISO 16139-2000 工业用阀门　热塑性材料制闸阀 Industrial valves - Gate valves for thermoplastic materials (ISO/DIS 16139:2000)
prEN ISO 17292-2002 石油、石油化工及相关工业用金属球阀 Metal ball valves for petroleum, petrochemical and allied industries (ISO/DIS 17292:2002) / Note: Endorsement notice
prEN ISO 21787-2001 工业阀门　热塑塑料制球阀 Industrial valves - Globe valves of thermoplastic materials (ISO/DIS 21787:2001)
prEN ISO 407-2001 小型医用气瓶　针导轭式阀连接 Small medical gas cylinders - PIN-index yoke-type valve connections (ISO/DIS 407:2001)
prEN ISO 4126-1-2003 防止过压防护的安全装置 第1部分：安全阀 Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO/FDIS 4126-1:2003)
prEN ISO 4126-4-2003 保护额外压力的安全设备　第4部分：飞行员操作安全阀 Safety devices for the protection against excessive pressure - Part 4: Pilot operated safety valves (ISO/FDIS 4126-4:2003)
编号中文名称英文名称
返回