美国铝标准(ANSI aluminium standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
ANSI B74.14-2007 氧化铝磨粒与磨料的化学分析用方法 Methods of Chemical Analysis of Aluminum Oxide Abrasive Grain and Abrasive Crude
ANSI C119.4-2004 电连接器.铝-铝或铝-铜裸架空导线间使用的连接器 Electric Connectors – Connectors for Use between Aluminum-to-Aluminum or Aluminum-to-Copper Bare Overhead Connectors
ANSI C119.6-2006 铝和铜导线用额定电压小于等于600V的非密封多端连接装置 Standard for Non-Sealed, Multiport Connector Systems Rated 600 Volts or Less for Aluminum and Copper Conductors
ANSI C80.5-2005 电气钢性铝导管(ERAC) Electrical Rigid Aluminum Conduit (ERAC)
ANSI E1.2-2006 娱乐技术.铝架和铝塔的设计、制造和使用 Entertainment Technology - Design, Manufacture and Use of Aluminum Trusses and Towers
ANSI H35.1/H 35.1M-2006 铝材的美国国家标准合金和回火名称与符号注册系统 American National Standard Alloy and Temper Designation Systems for Aluminum
ANSI H35.2-2006 铝轧制品(米制)的尺寸公差 Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2006 铝轧产品(米制)的尺寸公差 Dimensional Tolerances for Aluminum Mill Products (Metric)
ANSI H35.3-1997 铝硬化剂的命名体系 Designation System for Aluminum Hardeners
ANSI H35.4-2006 非合金铝的命名与符号系统 Designation System for Unalloyed Aluminum
ANSI H35.5-1993 铝金属基体复合材料的命名体系 Nomenclature System for Aluminum Metal Matrix Composite Materials
ANSI PH4.150-1986 摄影用化学药品.十二水硫酸铝钾 Photography (Chemicals) - Aluminum Potassium Sulfate, Dodecahydrate
ANSI PH4.154-1981 摄影用化学药品.氯化铝溶液 Photographic Grade Aluminum Chloride Solution
ANSI PH4.155-1981 摄影用化学药品.硫酸铝溶液 Photographic Grade Aluminum Sulfate Solution
ANSI/ANS 15.2-1999 片状铝铀核燃料元件的质量控制 Quality Control for Plate-Type Uranium-Aluminum Fuel Elements
ANSI/ASTM B603-2001 电加热元件的拉伸或辊轧铁铬铝合金规范 Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ANSI/ASTM B669-1997 锻造及压模铸用锌铝合金铸锭规范 Specification for Zinc-Aluminum Alloys in Ingot Form for Foundry and Die Castings
ANSI/ASTM B750-1999 热浸涂层锌5%铝混合稀土合金(UNS Z38510)铸锭规范 Specification for Zinc-5 % Aluminum-Mischmetal Alloy (UNS Z38510) in Ingot Form for Hot-Dip Coatings
ANSI/ASTM B78-2001 铁镍铝合金电加热加速寿命试验方法 Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ANSI/ASTM B791-1997 锌铝合金铸造和压模铸件规范 Specification for Zinc-Aluminum (Za) Alloy Foundry and Die Castings
ANSI/ASTM B865-1996 沉淀硬化镍铜铝合金(UNS N05500)棒材、杆材、线材、锻件和锻坯规范 Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ANSI/ASTM B872-1996 沉淀硬化镍铁铬钴(Nb)钛铝合金(UNS N09908)板、薄板及带材规范 Specification for Precipitation-Hardening Nickel-Iron-Chromium-Columbium (NB)-Titanium-Aluminum Alloy (UNS NO9908) Plate, Sheet and Strip
ANSI/ASTM B892-2001 压模铸造用锌铜铝铸锭规范 Specification for Zinc-Copper-Aluminum in Ingot Form for Die Castings
ANSI/ASTM B894-1999 锌铜铝合金压模铸件规范 Specification for Zinc-Copper-Aluminum Alloy Die Castings
ANSI/ASTM D2809-1999 发动机冷却剂对铝泵的气蚀和侵蚀特性测试方法 Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps with Engine Coolants
ANSI/ASTM D2943-1996 1,1,1-三氯乙烷铝划痕试验方法 Test Method for Aluminum Scratch of 1,1,1-Trichloroethane
ANSI/ASTM D4340-1998 排热条件下发动机冷却剂铸造铝合金腐蚀性测试方法 Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants under Heat-Rejecting Conditions
ANSI/ASTM D5184-2001 利用灰化熔化感应耦合等离子体原子发散光谱和原子吸收光谱测定燃料油中铝和硅的方法 Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry (05.03)
ANSI/ASTM D6353-2006 铝生产中预焙阳极的取样方案和芯取样指南 Guide for Sampling Plan and Core Sampling of Prebaked Anodes Used in Aluminum Production
ANSI/ASTM D6354-2004 用于铝生产的碳阴极块的取样计划和芯取样的指南 Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ANSI/ASTM D6454-1998 铝生产用碳极块芯取样和取样方案指南 Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ANSI/ASTM F1281-2007 交联聚乙烯/铝/交联聚乙烯(PEX-AL-PEX)压力管规范 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ANSI/ASTM F1282-2005 聚乙烯/铝/聚乙烯(PE-AL-PE)合成压力管规范 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ANSI/ASTM F1974-2008 聚乙烯/铝/聚乙烯和交联聚乙烯/铝/交联聚乙烯复合压力管用金属内插配件用规范 Specification for Metal Insert Fittings for Polyethylene/aluminum/polyethylene and Crosslinked Polyethylene/aluminum/crosslinked Polyethylene Composite Pressure Pipe
ANSI/ASTM F2262-2005 OD可控的SDR9交联聚乙烯/铝/交联聚乙烯管的规范 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
ANSI/ASTM F2434-2008 SDR9交联聚乙烯(PEX)管道和SDR9交联聚乙烯/铝/交联聚乙(PEX-AL-PEX)管道用卷制铜环的金属插件规范 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing and SDR9 Cross-Linked Polyethylene/Aluminum/Cross-Linked Polyethylene (PEX-AL-PEX) Tubing
ANSI/AWS A5.10-1992 无药皮铝和铝合金焊条和焊棒规范 Bare Aluminum and Aluminum Alloy Welding Electrodes and Rods, Specification for
ANSI/AWS A5.10/A 5.10M-1999 裸铝和铝合金电焊条及焊条的规范 Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods
ANSI/AWS A5.3/A 5.3M-1999 保护金属电弧焊用铝和铝合金电极 Aluminum and Aluminum Alloy Electrodes for Shielded Metal Arc Welding
ANSI/AWS B2.1.22-015-2002 标准焊接程序规范.在焊接条件下、有或没有垫板、10到18规格铝(M-22或P-22)的钨电极惰性气体保护焊 Standard Welding Procedure Specification – Gas Tungsten Arc Welding of Aluminum (M-22 or P-22), 10 through 18 Gage, in the as-Welded Condition, with or without Backing
ANSI/AWS C2.18-1993 铝、锌及其合金和复合物的带有热喷覆层的钢的保护 Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and their Alloys and Composites
ANSI/AWS C2.23/C 2.23M-2003 铝、锌及其合金的热喷镀层(金属化处理)和钢防腐蚀保护复合材料的应用规范 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
ANSI/AWS C3.7M/C 3.7-2005 铝钎焊规范 Specification for Aluminum Brazing
ANSI/AWS D1.2/D 1.2M-2008 结构焊接规则.铝 Structural Welding Code - Aluminum
ANSI/AWS D10.7M/D 10.7-2008 铝和铝合金管的气体保护电弧焊用指南 Guide for the Gas Shielded Arc Welding of Aluminum and Aluminum Alloy Pipe
ANSI/AWS D3.7-2004 铝制船体焊接指南 Guide for Aluminum Hull Welding
ANSI/AWS D8.14M-2008 自动焊接质量规范.铝弧焊 Specification for Automotive Weld Quality - Arc Welding of Aluminum
ANSI/AWWA B403-2003 硫酸铝.液体、沉积物或块状物 Aluminum Sulfate – Liquid, Ground, or Lump
ANSI/AWWA B405-2006 铝酸钠 Sodium Aluminate
ANSI/AWWA B408-2003 液态聚氯化铝 Liquid Polyaluminum Chloride
ANSI/AWWA C903-2005 给水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-铝-聚乙烯和交联聚乙烯-铝-交联聚乙烯复合压力管 Polyethylene-Aluminum-Polyethylene & Crosslinked Polyethylene-Aluminum-Crosslinked Polyethylene Composite Pressure Pipes, 1/2 In. (12 mm) Through 2 In. (50 mm), for Water Service
ANSI/EIA 395-1-1975 长寿命(1型)和普通(2型)极化铝的电解电容器 Electrolytic Capacitors for Long Life, Type 1, and General Purpose Application, Type 2, Polarized Aluminum
ANSI/EIA-463-B-2003 重型(1型)和轻型(2型)交流电动机起动用固定铝电解电容器 Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and Light Duty (Type 2), Fixed Aluminum
ANSI/EIA-956-2006 带聚合物阴极的铝电解集成电容器 Aluminum Electrolytic Chip Capacitor with Polymer Cathode
ANSI/I3A IT4.154-2006 化学处理.氯化铝溶液规范 Processing Chemicals - Specifications for Aluminum Chloride Solution
ANSI/IEEE 635-2003 电力电缆铝护套的选择和设计指南 Guide for Selection and Design of Aluminum Sheaths for Power Cables
ANSI/NECA 102-2004 安装铝导管 Installing Aluminum Conduits
ANSI/NECA 104-2006 安装铝建筑电线和电缆的推荐规程 Recommended Practice for Installing Aluminum Building Wire and Cable
ANSI/PIMA IT4.155-1981 摄影级硫酸铝溶液 Photography (Chemicals) – Aluminum Sulfate Solution
ANSI/SCTE 100-2004 75 Ohm平滑铝制用户接入电缆规范 Specification for 75 Ohm Smooth Aluminum Subscriber Access Cable
ANSI/UL 486E-2000 铝和/或铜导线使用的设备配线终端 Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors
ANSI/UL 6A-2008 电器用刚性金属导管.铝、青铜及不锈钢 Electrical Rigid Metal Conduit - Aluminum, Red Brass, and Stainless Steel (Proposal dated 5-9-08)
ANSI/UL 6Aa-2003 电器用刚性金属导管.铝、青铜及不锈钢 Electrical Rigid Metal Conduit - Aluminum, Bronze and Stainless Steel
ANSI/UL 797A-2007 电气金属管件.铝 Electrical Metallic Tubing - Aluminum (Proposal dated 6-8-07)
ASME B31.3 Cases NO. 2-1993 压力管道用套管规程.套管141:在ANSI/ASME B 31.3管道标准中铝合金法兰的使用规则 (Cases code for pressure piping - Case 141: Rules for use of aluminium alloy flanges in ANSI/ASME B 31.3 piping)
ASTM A1002-1999(2003) 镍铝有序合金铸件的标准规范 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
ASTM A491-2007 镀铝钢链环栏栅结构的标准规范 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
ASTM A925-2003 地面架空线用锌-5%铝-铈合金涂覆钢绞线的标准规范 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
ASTM B137-1995(2004) 阳极镀铝层重量测定的标准试验方法 Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B148-1997(2003)e1 铝青铜砂型铸件标准规范 Standard Specification for Aluminum-Bronze Sand Castings
ASTM B179-2006 全铸造工艺的铸锭和熔融成形铸件中铝合金的标准规范 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
ASTM B209-2007 铝和铝合金薄板材和板材的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM B209M-2007 铝和铝合金薄板材和板材(米制)的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
ASTM B210-2004 拉制无缝铝和铝合金管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
ASTM B210M-2005 拉制铝和铝合金无缝管的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
ASTM B211-2003 铝及铝合金棒材、条材和线材标准规范 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
ASTM B211M-2003 铝及铝合金棒材、条材和线材(米制)标准规范 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire [Metric]
ASTM B221M-2007 铝和铝合金挤压棒材、杆材、线材、型材和管材用标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes [Metric]
ASTM B233-1997(2007) 电气用拉制铝1350条标准规范 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes
ASTM B234-2004 冷凝器及热交换器用铝和铝合金拉制无缝管的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers
ASTM B234M-2004 冷凝器及热交换器用铝和铝合金拉制无缝管的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]
ASTM B236-2007 电气用铝棒(汇流条)的标准规范 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
ASTM B236M-2007 电气用铝汇流条的标准规范(母线)(米制系列) Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]
ASTM B240-2007 铸造和压模铸件用铸锭结构中锌和锌铝(ZA)合金的标准规范 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
ASTM B244-1997(2002) 用涡流仪器测量铝阳极镀层及其它非磁性基底金属绝缘镀层的厚度标准试验方法 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
ASTM B247-2002a 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
ASTM B247M-2002a 铝和铝合金压模锻件、手工锻件和轧制环形锻件的标准规范(米制) Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
ASTM B253-1987(2005)e1 电镀用铝合金的制备标准指南 Standard Guide for Preparation of Aluminum Alloys for Electroplating
ASTM B279-2004 制造磁导线用方形和矩形软裸铜线及铝线硬度的标准测试方法 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication
ASTM B324-2001(2007) 电气用矩形和方形铝线标准规范 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes
ASTM B373-2000(2006) 电容器用铝箔标准规范 Standard Specification for Aluminum Foil for Capacitors
ASTM B401-2004 致密圆形钢芯加强同心绞捻铝导线(ACSR/COMP)标准规范 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
ASTM B415-1998(2007) 硬拉包铝钢丝标准规范 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire
ASTM B416-1998(2007) 同心绞捻包铝钢导线标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
ASTM B449-1993(2004) 铝的铬酸盐处理标准规范 Standard Specification for Chromates on Aluminum
ASTM B479-2006 与食品接触的和其它用途的挠性包装材料用退火铝及铝合金箔标准规范 Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications
ASTM B502-2002(2007) 包铝钢芯加强的铝导线用包铝钢芯线的标准规范 Standard Specification for Aluminum-Clad Steel Core Wire for Aluminum Conductors, Aluminum-Clad Steel Reinforced
ASTM B546-2004 电熔焊接镍铬钴钼合金(UNS N06617)、镍铁铬硅合金(UNS N08330和UNS N08332)、镍铬铁铝合金(UNS N06603)、镍 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe
ASTM B548-2003 压力容器用铝合金板的超声波检验的标准试验方法 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
ASTM B549-2004 包铝钢芯加强的同心绞捻铝导线(ACSR/AW)标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced (ACSR/AW)
ASTM B557-2006 锻造和铸造的铝及镁合金制品的抗拉试验的标准试验方法 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM B557M-2007e1 锻造和铸造铝合金和镁合金制品的抗拉测试的标准试验方法(米制) Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
ASTM B565-2004 铝和铝合金铆钉及冷镦头丝与棒材的剪切试验的标准试验方法 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
ASTM B566-2004a 包铜铝丝标准规范 Standard Specification for Copper-Clad Aluminum Wire
ASTM B580-1979(2004) 铝阳极氧化镀层 Standard Specification for Anodic Oxide Coatings on Aluminum
ASTM B592-2001(2006) 铜锌铝钴合金、铜锌锡铁板、薄板、带材及轧制的棒材标准规范 Standard Specification for Copper-Zinc-aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
ASTM B594-2006 航空设备用铝合金锻制品超声波检验的标准实施规程 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications
ASTM B595-1995(2006) 烧结铝结构部件标准规范 Standard Specification for Sintered Aluminum Structural Parts
ASTM B603-2007 电热元件用拉制或轧制铁-铬-铝合金的标准规范 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements
ASTM B645-2007 铝合金线性弹性平面应变断裂韧性测试的标准实施规程 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM B646-2006a 铝合金断裂韧性试验的标准实施规程 Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM B647-1984(2006) 用维氏硬度仪测定铝合金压痕硬度的试验方法 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM B648-1978(2006) 用巴氏压痕仪测定铝合金压痕硬度的标准试验方法 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B680-1980(2004) 用酸溶解法测定铝的阳极镀层封闭质量的试验方法 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution
ASTM B711-2005 同心绞捻铝合金钢芯导线(AACSR)(6201)的标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)
ASTM B724-2000(2006) 用新式轻便非卡尺型仪器测量铝合金压痕硬度的标准试验方法 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B736-2000(2006) 铝、铝合金和铝包层钢电缆屏蔽材料标准规范 Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock
ASTM B769-2007 铝合金的剪切测试用标准试验方法 Standard Test Method for Shear Testing of Aluminum Alloys
ASTM B778-2002(2007) 成形线状致密同芯绞捻铝导线(AAC/TW)标准规范 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)
ASTM B779-2003 钢筋加强的异型钢丝致密同芯绞捻铝导线标准规范 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)
ASTM B78-1990(2007) 电加热用铁铬铝合金的加速寿命的试验方法 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
ASTM B800-2005 电气用退火及中温回火8000系列铝合金线的标准规范 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers
ASTM B801-2007 随后涂层或绝缘用8000系列铝合金同心式绞捻导线用标准规范 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM B831-2005 薄铝合金制品剪切试验的标准试验方法 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
ASTM B836-2000(2005) 使用单输入线路结构的致密圆铝绞接导线的标准规范 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
ASTM B856-2003 镀覆钢支持的同心铺设铝绞线标准规范 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)
ASTM B857-2002 镀覆钢支持的成型钢丝压缩同心铺设铝绞线标准规范 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
ASTM B865-2004 沉淀硬化镍铜铝合金(UNS N05500)棒材、杆材、线材、锻件和锻坯的标准规范 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock
ASTM B871-2001(2007) 铝合金产品撕裂测试的标准试验方法 Standard Test Method for Tear Testing of Aluminum Alloy Products
ASTM B881-2005 铝和镁合金产品的相关标准术语 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
ASTM B892-2003 压模铸造用锌铜铝合金锭标准规范 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
ASTM B894-2003 锌铜铝合金压铸件标准规范 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
ASTM B901-2004 用单输入金属线结构的压缩圆形铝绞线的标准规范 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
ASTM B909-2000(2006) 非应力消除铝制品的平面应力断裂强度试验的标准导则 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
ASTM B918-2001 锻造铝合金的热处理的标准实施规程 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
ASTM B926-2003 用灯标表测定铝及铝合金平箔中气泡的标准方法 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
ASTM B941-2005 电工用耐热铝锆合金丝的标准规范 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes
ASTM B945-2006 T1、T2、T5、和T10型回火产品的梯度温度成形加工的冷挤压铝合金的标准规范 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
ASTM B947-2006 铝合金厚板用热轧钢机溶解热处理的标准实施规范 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM C1031-2005 核纯级的氧化铝粉末的标准规范 Standard Specification for Nuclear-Grade Aluminum Oxide Powder
ASTM C1070-2001(2007) 用激光扩散法测定氧化铝和石英粒度分布的试验方法 Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
ASTM C1431-1999(2005) 维护容器清理用铝基废核燃料腐蚀检验的标准导则 Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
ASTM C1655-2006 耐火土和高铝砂浆的标准分类 Standard Classification of Fireclay and High-Alumina Mortars
ASTM C181-2003 耐火粘土和高铝塑性耐火材料可加工性指数的标准试验方法 Standard Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
ASTM C703-1972(2006) 铝制搪瓷涂层的抗脱落试验方法 Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
ASTM C784-2005 核纯级的氧化铝、碳化硼复合丸料的标准规范 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets
ASTM C809-1994(2007) 核纯级氧化铝和氧化铝-碳化硼复合丸状材料化学、质谱和光谱化学分析的标准试验方法 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets
ASTM D1730-2003 涂漆用铝和铝合金表面预处理标准实施规范 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D1731-2003 涂漆用热浸铝表面预处理标准实施规范 Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
ASTM D2674-1972(2004)e1 铝表面准备用硫代铬酸盐蚀刻溶液分析的标准试验方法 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
ASTM D2809-2004e2 带有发动机冷却剂的铝泵的气蚀和侵蚀特性的标准试验方法 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
ASTM D2824-2006 无纤维增强、石棉纤维增强和无石棉的纤维增强的填充铝颜料的沥青屋面涂层标准规范 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos
ASTM D2943-2002(2007) 测定稳定性用1,1,1-三氯乙烷的铝刮痕标准试验方法 Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability
ASTM D3260-2001(2005) 适用于工厂的压制铝制品透明涂层的耐酸和耐灰浆标准试验方法 Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
ASTM D3610-2000(2004) 电位滴定法测定氧化铝基钴-钼催化剂中总钴含量的标准试验方法 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method
ASTM D3762-2003 用胶粘剂粘结的铝表面耐久性的标准试验方法(楔入试验) Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)
ASTM D3805-1997(2003)e1 填充铝颜料的沥青屋顶涂料的涂覆的标准指南 Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
ASTM D3933-1998(2004) 结构胶粘剂粘结铝表面处理的实施规程(磷酸阴极氧化处理) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
ASTM D3943-2004 新制氧化铝基催化剂中总钼量的标准试验方法 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
ASTM D4340-1996(2007) 在排热条件下发动机冷却剂对铸造铝合金腐蚀性的标准试验方法 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
ASTM D4481-2004 新制氧化铝基催化剂中总镍含量的标准试验方法 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
ASTM D4926-2006 用X-射线粉末衍射法对触煤剂中含硅和铝矾土的触煤剂中伽马铝矾土含量的试验方法 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction
ASTM D5184-2001(2006) 通过灰化、熔融、感应耦合等离子体原子放射分光光度法和原子吸收分光光谱法测定燃料油中铝和硅的标准试验方 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
ASTM D5502-2000(2005) 通过铝工业生产的阳极和阴极碳物理测量确定表观密度的标准试验方法 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
ASTM D6208-2007 用恒电流测量铝及其合金的再钝化电位的标准试验方法 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
ASTM D6353-2006 铝生产用预焙阳极的取样计划和芯取样的标准指南 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
ASTM D6356-1998(2004) 用作屋顶防护涂层的铝乳化沥青的氢气体产生的标准试验方法 Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
ASTM D6492-1999(2003) 锌及锌/铝合金涂覆钢上六价铬检测的标准实施规程 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D6848-2002 用作屋顶防护层的铝着色乳化沥青的标准规范 Standard Specification for Aluminum Pigmented Emulsified Asphalt Used as a Protective Coating for Roofing
ASTM D857-2007 水中铝含量的标准试验方法 Standard Test Method for Aluminum in Water
ASTM E1251-2007 用原子发射光谱法分析铝和铝合金的标准试验方法 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Atomic Emission Spectrometry
ASTM E127-2007 标准铝合金块的制造及超声波检验的标准操作规程 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
ASTM E155-2005 铝和镁铸件检验用标准基准射线照相术 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E1637-1998(2003) 结构固定接缝铝屋顶镶板系统的标准规范 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
ASTM E1648-1995(2006) 用于检验焊接中铝的标准参考射线照片 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
ASTM E1652-2003 金属外壳的铂电阻温度表、基金属热电耦和贵金属温差热电偶制造中使用的氧化镁和氧化铝粉末及压扁绝缘子的标 Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
ASTM E1793-2005 连入泡沫和梁型可移动遮蔽物的铝合金制备的标准实施规程 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
ASTM E1801-2003 泡沫和梁型遮盖物用铝饰面板的粘结性的测定的标准实用规程 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
ASTM E1826-2005 铝合金粘结用低挥发性有机化合物耐腐蚀粘合底漆的标准规范 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
ASTM E215-1998(2004)e1 无缝铝合金管的电磁检验用的标准化设备 Standard Practice for Standardizing Equipment for Electromagnetic Examination of Seamless Aluminum-Alloy Tube
ASTM E2422-2005 检验铝铸件的标准数字参考图像 Standard Digital Reference Images for Inspection of Aluminum Castings
ASTM E266-2007 用铝的放射性测量快速中子反应速率的标准试验方法 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
ASTM E34-1994(2002) 铝和铝基合金化学分析的标准试验方法 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
ASTM E505-2001(2006) 铝和镁压模铸件检验用标准参考射线照相 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
ASTM E539-2007 6铝4钒钛合金的X射线荧光光谱测定分析用标准试验方法 Standard Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium Alloy
ASTM E607-2002 在氮气芬围中用点对面技术作铝合金的原子辐射光谱测定分析的标准试验方法 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM E716-1994(2002) 光谱化学分析用铝和铝合金取样 Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
ASTM E738-2000(2005) 用络合滴定法测定铁矿石和有关材料中铝含量的标准试验方法 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by Complexometric Titration
ASTM E866-2005 蜂窝状保护板中粘结铝合金用耐腐蚀粘合底漆的标准规范 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
ASTM E874-2004 保护板用非金属蜂窝状芯体铝盖面的粘合剂粘结标准规程 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
ASTM F1136-2004 紧固件用锌/铝防蚀镀层的标准规范 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
ASTM F1136M-2004 紧固件的抗锌/铝腐蚀涂层的标准规范(米制) Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric]
ASTM F1183-1996(2006) 铝合金链环栅栏结构 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
ASTM F1281-2007 交联聚乙烯/铝/交联聚乙烯(PEX-AL-PEX)压力管的标准规范 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM F1282-2006 聚乙烯/铝/聚乙烯(PE-AL-PE)复合材料压力管的标准规范 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1295-2005 外科植入设备用锻制钛-6铝-7铌合金的标准规范 Standard Specification for Wrought Titanium-6 Aluminum-7 Niobium Alloy for Surgical Implant Applications (UNS R56700)
ASTM F1428-1992(2005) 紧固件用非有机顶涂层,防腐蚀涂层的铝颗粒填充底涂层/有机物 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
ASTM F1513-1999(2003) 电子薄膜器件用纯铝(非合金)原材料标准规范 Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications
ASTM F1580-2007 外科植入物覆层用钛和钛-6铝-4钒合金粉末的标准规范 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
ASTM F1594-1995(2003) 真空镀膜用纯铝(未掺杂质)原材料标准规范 Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications
ASTM F2146-2007 外科移植物用锻造钛-3铝-2.5钒合金无缝管的标准规范(UNS R56320) Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
ASTM F2262-2005 交联聚乙烯/铝/交联聚乙烯管OD控制的SDR9的标准规范 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
ASTM F487-1988(2006) 纯铝-半导体引线连接用1%硅细丝 Standard Specification for Fine Aluminum-1% Silicon Wire for Semiconductor Lead-Bonding
ASTM F603-2000 外科植入用高纯度密实氧化铝的标准规范 Standard Specification for High-Purity Dense Aluminum Oxide for Surgical Implant Application
ASTM F7-1995(2006) 氧化铝粉末 Standard Specification for Aluminum Oxide Powder
ASTM F901-2001(2007) 铝制传送塔螺栓和螺母标准规范 Standard Specification for Aluminum Transmission Tower Bolts and Nuts
ASTM G103-1997(2005) 在6%沸腾的氯化钠溶液中进行铝锌镁低铜合金的应力腐蚀断裂试验的标准实施规程 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution
ASTM G110-1992(2003)e1 将铝合金浸入氯化钠和过氧化氢溶液中进行热处理时抗晶粒间腐蚀的评定 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution
ASTM G112-1992(2003) 进行铝合金的剥离腐蚀试验 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
ASTM G139-2005 用破坏载荷法测定可热处理铝合金制品的抗应力腐蚀开裂特性的标准试验方法 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
ASTM G34-2001(2007) 2XXX和7XXX系列铝合金剥落腐蚀敏感性的试验方法(EXCO 试验) Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G47-1998(2004) 测定高强度铝合金制品应力腐蚀断裂敏感性的标准试验方法 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G64-1999(2005) 热处理铝合金抗应力腐蚀断裂性的标准分类 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
ASTM G66-1999(2005)e1 5XXX系列铝合金的剥落腐蚀敏感性的外观评定的试验方法(ASSET试验) Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM G67-2004 用接触硝酸环境之后的重量损失来测定5XXX系列铝合金晶间腐蚀敏感性的标准试验方法(NAMLT 试验) Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM G69-1997(2003) 测定铝合金潜在腐蚀性 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
IEEE 635-1989 电力电缆铝护套的选择和设计指南 (Guide for selection and design of aluminium sheaths for power cables)
UL 1567-1998 铝线用插座和开关 (Receptacles and switches intended for use with aluminium wire )
UL 486B-1997 铝导线用接线器 (Wire connectors for use with aluminium conductors )
UL 486E-1994 铝和/或铜导线用设备布线终端 (Equipment wiring terminals for use with aluminium and/or copper conductors )
UL 6A-2000 硬金属导管.铝、青铜和不锈钢 (Rigid metal conduit - Aluminium, bronze and stainless steel )
UL 797A-2000 电力金属管.铝 (Electrical metallic tubing - Aluminium )
编号 中文名称 英文名称

返回