| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 14301-1985 | 标称压力为16的D型供水和吸水用铝合金联接器 | Aluminium alloy delivery and suction coupling type D; nominal pressure |
| DIN 14302-1985 | 标称压力为16的C型供水铝合金联接器 | Aluminium alloy delivery coupling type C; nominal pressure 16 |
| DIN 14303-2008 | 标称压力为PN 16、B型铝合金输送连接件 | Aluminium alloy delivery coupling type B with nominal pressure PN 16 |
| DIN 14306-1986 | 压力和抽吸用的铝合金D型刚性联轴节PN16 | Aluminium alloy solid coupling type D for pressure and suction purposes; nominal pressure 16 |
| DIN 14307-1-1985 | 带压力用密封圈的铝合金C型刚性联接器.标称压力16 | Aluminium alloy solid coupling type C, with sealing ring for pressure purposes; nominal pressure 16 |
| DIN 14307-2-1986 | 抽吸用C型、标称压力16带密封圈的铝合金刚性接头 | Aluminium alloy solid coupling type C with sealing ring for suction purposes; nominal pressure 16 |
| DIN 14308-1-1985 | 带压力用密封圈的铝合金B型刚性联接器.标称压力16 | Aluminium alloy solid coupling type B, with sealing ring for pressure purposes; nominal pressure 16 |
| DIN 14308-2-1986 | 抽吸用B型、标称压力16带密封圈的铝合金刚性接头 | Aluminium alloy solid coupling type B with sealing ring for suction purposes; nominal pressure 16 |
| DIN 14309-1985 | 标称压力为16带压力吸水密封环的A型铝合金联接器 | Aluminium alloy solid coupling type A, with sealing ring for pressure and suction purposes; nominal pressure 16 |
| DIN 14310-1986 | 压力和抽吸用的铝合金制有盖板的灭火水龙带D型联轴节：公称压力PN16 | Aluminium alloy cap fire hose coupling typ D for pressure and suction purposes; nominal pressure 16 |
| DIN 14311-1985 | 标称压力为16抽吸和压力用铝合金消防水龙带C型管接头 | Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16 |
| DIN 14312-1985 | 标称压力为16、压力吸水用消防软管B型铝合金联接器 | Aluminium alloy cap fire hose coupling type B, for pressure and suction purposes; nominal pressure 16 |
| DIN 14313-1989 | 压水和抽水用铝合金制A型盲板消防联接器.公称压力 16 | Aluminium alloy cap fire hose coupling type A for pressure and suction purposes; nominale pressure 16 |
| DIN 14317-1985 | 标称压力为16、带金属密封面和灰铸铁或铝合金盖的C型铝合金刚性联接器 | Aluminium alloy solid coupling type C with metallic sealing area and with cast iron cover or with aluminium alloy cover, type C; nominal pressure 16 |
| DIN 14318-1985 | 带铸铁或铝合金盖的有金属密封面的B型铝合金刚性联接器PN16 | Aluminium alloy solid coupling type B with metallic sealing area and with cast iron cover or with aluminium alloy cover, type B; nominal pressure 16 |
| DIN 14319-1985 | 铝合金带金属密封面和灰铸铁或铝合金盖的A型固定联接器.公称压力 16 | Aluminium alloy solid coupling type A with metallic sealing area and with cast iron or with aluminium alloy cover, type A; nominal pressure 16 |
| DIN 14321-1985 | 标称压力为16、C型抽水铝合金联接器 | Aluminium alloy suction coupling type C; nominal pressure 16 |
| DIN 14322-1989 | 铝合金B型抽水联接器.公称16 | Aluminium alloy suction coupling type B; nominal pressure 16 |
| DIN 14323-1985 | 标称压力为16、A型供水和抽水用铝合金联接器 | Aluminium alloy delivery and suction coupling type A; nominal pressure 16 |
| DIN 14330-1-1985 | S 28 消防软管用标称压力PN16 C型铝合金联轴器 | Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 28 |
| DIN 14330-2-1985 | S 38 消防软管用标称压力PN16 C型铝合金联轴器 | Aluminium alloy delivery coupling type C; nominal pressure 16, used for fire hoses S 32 |
| DIN 14332-1986 | 输送管路的C型铝合联接器.公称压力16 .用于 C42 消防软管 | Aluminium alloy delivery coupling type C; nominal pressure 16; used for fire hoses C 42 |
| DIN 14341-1986 | 标称压力为16的 铝合金C-D型转接接头 | Aluminium alloy C-D-adaptor for nominal pressure 16 |
| DIN 14342-1986 | 标称压力为16的 铝合金B-C型转接接头 | Aluminium alloy B-C-adaptor for nominal pressure 16 |
| DIN 14343-1986 | 标称压力为16 的铝合金A-B型转接接头 | Aluminium alloy A-B-adaptor for nominal pressure 16 |
| DIN 16836-2005 | 多层管.聚烯烃铝多层管.一般要求和试验 | Multilayer pipes - Polyolefin-Aluminium-Multilayer pipes - General requirements and testing |
| DIN 1732-3-2007 | 铝和铝合金用填充金属.第3部分:全焊金属的试件、试样和机械及技术性能 | Filler metals for aluminium and aluminium alloys - Part 3: Test pieces, test specimens, mechanical and technological properties of all-weld metal |
| DIN 17611-2007 | 锻造铝和锻造铝合金的阳极氧化产品.交货技术条件 | Anodized products of wrought aluminium and wrought aluminium alloys - Technical conditions of delivery |
| DIN 18364-2006 | 德国建筑合同程序.第C部分:建筑工程通用技术规范.钢和铝结构的防护工程 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Corrosion protection of steel structures |
| DIN 18807-6-1995 | 房屋结构用梯形型材.第6部分:铝制梯形型材及连接件.通过计算得出支承力数据 | Trapezoidal sheeting in buildings - Part 6: Aluminium trapezoidal sheeting and their connections; determination of load bearing capacity by calculation |
| DIN 18807-7-1995 | 建筑物用梯形板材.第7部分:铝制梯形板材及其连接件.通过试验对承载能力的测定 | Trapezoidal sheeting in buildings - Part 7: Aluminium trapezoidal sheeting and their connections; determination of load bearing capacity by test |
| DIN 18807-8-1995 | 房屋结构用梯形型材.第8部分:铝制梯形型材及其连接件.支承安全性验证和使用上的适应性 | Trapezoidal sheeting in buildings - Part 8: Aluminium trapezoidal sheeting and their connections; verifications of load bearing capacity and usability |
| DIN 18807-9-1998 | 建筑物的梯形薄板.第9部分:铝梯形型材及其连接件.使用和构造 | Trapezoidal sheeting in buildings - Part 9: Aluminium trapezoidal sheeting and their connections; application and construction |
| DIN 28460-1987 | 油罐车用安装法兰.铝管材的焊接法兰 | Flanges for tank trucks; welding flanges for aluminium tubes |
| DIN 29531-1990 | 航空航天.铝合金和镁合金铸件.技术规范. | Aerospace; castings of aluminium and magnesium alloys; technical specification |
| DIN 29543-1990 | 航空航天.锻铝合金无缝承内压管材.技术规范.不适用于新设计 | Aerospace; seamless internal pressure tubes in wrought aluminium alloys; technical specification; inactive for new design |
| DIN 29544-1990 | 航空航天.铝和锻铝合金无缝导管.技术规范.不适用于新设计 | Aerospace; seamless duct tubing of aluminium and wrought aluminium alloys; technical specification; inactive for new design |
| DIN 29546-1990 | 航空航天.锻铝合金薄片板材，中厚板材和带材；技术规范.不适用于新设计 | Aerospace; wrought aluminium alloys sheet, plate and strip; technical specification; inactive for new design |
| DIN 29547-1990 | 航空航天.锻铝合金无缝结构管材.技术规范.不适用于新设计 | Aerospace; seamless structural tubes in wrought aluminium alloys; technical specification; inactive for new design |
| DIN 29594-1989 | 航空航天.米制系列，铝合金锁环. | Aerospace; aluminium alloy collars, metric series |
| DIN 29850-1989 | 航空航天.精制铝合金的热处理 | Aerospace; heat treatment of wrought aluminium alloys |
| DIN 29900-2-1980 | 航空航天.铝制单导线、600V、150℃电缆技术规范 | Aerospace; electrical cables, single conductor, aluminium, 600 V, 150 C, technical specification |
| DIN 29978-1994 | 航空航天.防腐冲孔或无孔精锻铝合金六角形膨胀式蜂窝芯棒.技术规范 | Aerospace - Honeycomb cores, hexagonal expanded, in wrought aluminium alloy, corrosion protected, unperforated or perforated; technical specification |
| DIN 30645-1-2006 | 标牌的技术交付条件.第1部分:铝阳极氧化处理的标牌 | Technical delivery conditions for signs - Part 1: Anodised eloxal aluminium signs |
| DIN 30646-2006 | 自粘胶标志(标签).塑料薄膜、铝箔和纸制铭牌的交货技术条件 | Self-adhesive signs - Technical delivery conditions for signs made of plastic film, aluminium foil and paper |
| DIN 40501-2-2005 | 电工用铝.第2部分:管、杆/棒和型材.交货技术条件 | Aluminium for use in electrical engineering - Part 2: Tubes, rods bars and sections Technical delivery conditions |
| DIN 4113-1-1980 | 主要承受静载荷的铝结构.静态分析与结构设计 | Aluminium constructions under predominantly static loading; static analysis and structural design |
| DIN 4113-1/A1 Berichtigung 1-2008 | 承受主要静负荷的铝结构.静态分析和结构设计.修改件A1.技术勘误DIN 4113-1/A1-2002 | Aluminium constructions under prodominantly static loading - static analysis and structural design; Amendment A1, Corrigenda to DIN 4113-1/A1:2002-09 |
| DIN 4113-1/A1-2002 | 承受主要静负荷的铝结构.第1部分:静态分析与结构设计.修改件1 | Aluminium constructions under predominantly static loading - Part 1: Static analysis and structural design; Amendment A1 |
| DIN 4113-2 Berichtigung 1-2008 | 承受主要静负荷的铝结构.焊接结构的静态分析.技术勘误DIN 4113-2-2002 | Aluminium constructions under predominantly static loading - static analysis of welded constructions, Corrigenda to DIN 4113-2:2002-09 |
| DIN 4113-2-2002 | 承受主要静负荷的铝结构.第2部分:焊接结构的静态分析和结构设计 | Aluminium constructions under predominantly static loading - Part 2: Static analysis and structural design of welded constructions |
| DIN 43670-1975 | 铝汇流排.持续电流的计算 | Aluminium bus bars; design for continuous current |
| DIN 43670-2-1985 | 镀铜铝汇流排.连续电流的设计 | Aluminium bus bars copper cladding; design for continuous current |
| DIN 45910-1210-1993 | 电子元器件质量评定协调体系.详细规范.环境类型 40/085/56 (CECC 30301-037)、圆柱形金属壳、垂直安装、一 | Harmonized system of quality assessment for electronic components; detail specification: polar aluminium electrolytic capacitors with non-solid electrolyte DC 6,3 to 385 V, general-purpose grade, cylindrical metal case, vertical mounting, soldering pins, climatic category 40/085/56 (CECC 30301-048) |
| DIN 45910-1211-1993 | 电子元件质量评定协调体系.详细规范.高要求、圆柱形金属壳.立式安装.焊接柱DC16至350V液态电解质的极化铝电 | Harmonized system of quality assessment for electronic components; detail specification: polar aluminium electrolytic capacitors with non-solid electrolyte DC 16 to 350 V, long-life grade, cylindrical metal case, vertical mounting, soldering pins, climatic category 40/085/56 (CECC 30301-049) |
| DIN 45910-122-1983 | 电子元件质量评定协调体系.空白详细规范.固态电解质铝电解电容器 | Harmonized system of quality assessment for electronic components; blank detail specification: aluminium electrolytic capacitors with solid electrolyte |
| DIN 45910-124-1993 | 电子元器件质量评定协调体系.详细规范：环境类型 40/085/56 (CECC 30301-037)、单向引线、带绝缘套管的圆柱 | Harmonized system of quality assessment for electronic components; detail specification: polar aluminium electrolytic capacitors with non-solid electrolyte DC 6,3 to 385 V, general-purpose grade, cylindrical plastic case or metal case with insulation sleeve, unidirectional wire leads, climatic category 40/085/56 (CECC 30301-037) |
| DIN 45910-127-1994 | 电子元器件质量评定协调体系.详细规范：环境类型 40/085/56 (CECC 30301-037)、轴向引线、带绝缘套管的圆柱 | Harmonized system of quality assessment for electronic components; detail specification: Polar aluminium electrolytic capacitors with non solid electrolyte, DC 40 to 100 V (suitable to V a.c. load without using a polarizing potential), general-purpose grade, cylindrical metal case with insulation sleeve, axial wire leads, climatic category 40/085/56 (CECC 30301-045) |
| DIN 46267-2-1985 | 铝导线用非耐张力的压制接头 | Non tension-proof compression joints for aluminium conductors |
| DIN 46329-1983 | 铝导线用环形压接的电缆接头耳 | Cable lugs; for compression connections, ring type, for aluminium conductors |
| DIN 46420-1970 | 电工用拉制圆铝线.尺寸 | Round Aluminium Wires for Electrical Purposes, Drawn; Dimensions |
| DIN 46424-1973 | 开关设备.汇流条用挤压槽形铝型材 | Switchgear; Extruded Channel Sections of Aluminium for Busbars |
| DIN 46425-1970 | 电工用精拉制圆铝线.尺寸 | Round Aluminium Wires for Electrical Purposes, Exactly Drawn; Dimensions |
| DIN 47658-1975 | 铜和铝导线的屋内连接线的分线端子 | Branch terminals in house connections for copper and aluminium conductors |
| DIN 48072-1-1962 | 第1部分:铝绞合线和钢芯铝线用线路胶带 | Line tapes for stranded aluminium conductors and ACSR |
| DIN 48075-1-1967 | 第1部分:架空电力线用铝绞合线和钢芯铝绞合线的平行双槽线夹 | Parallel groove clamps for aluminium stranded conductors and for aluminium conductors steel-reinforced for overhead power lines |
| DIN 48085-2-1985 | 架空线路用铝导线的全拉力压制接头 | Full tension compression joints, for aluminium-conductors, for overhead lines |
| DIN 50154-1980 | 对厚度在0.179mm以下的铝和锻造铝合金薄片材和带材进行不用伸长计测量的拉力试验 | Tensile test without extensometer on foils and strips of aluminium and wrought aluminium alloys with a thickness up to 0,179 mm |
| DIN 50451-3-2003 | 半导体工艺用材料测试.液体中痕量元素测定.第3部分:用电感耦合等离子体质谱法测定硝酸中铝(AL)、钴(Co)、铜 | Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Aluminium (Al), cobalt (Co), copper (Cu), sodium (Na), nickel (Ni) and zinc (Zn) in nitric acid by ICP-MS |
| DIN 50898-2005 | 电镀覆层.有辅助处理的铝和铝合金的电镀覆层.要求和试验方法 | Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods |
| DIN 50908-1993 | 锻铝合金耐应力腐蚀裂缝性能的试验 | Testing the resistance of aluminium wrought alloys to stress corrosion cracking |
| DIN 50967-2005 | 金属镀层.铝及铝合金上的镍和镍铬电镀层 | Metallic coatings - Electrodeposited coatings of nickel and nickel plus chromium on aluminium and aluminium alloys |
| DIN 52240-4-1994 | 玻璃生产用原料的检验.碳酸钙最低含量为 95% 的石灰石的化学分析.第1部分:氧化铝的测定 | Testing of raw materials for the production of glass; chemical analysis of limestone with a minimum content of 95% calcium carbonate; determination of aluminium oxide |
| DIN 52241-4-1986 | 制造玻璃原料的分析.含碳酸钙镁不小于95%的白云石的化学分析.氧化铝测定 | Analysis of raw materials used in glass production; chemical analysis of dolomite containing not less than 95 % of calcium magnesium carbonate; determination of aluminium oxide |
| DIN 52340-5-1993 | 玻璃的检验.无色钠钙玻璃的化学分析.三氧化二铝含量的测定 | Testing of glass; chemical analysis of colourless soda-lime-glass; determination of Al<(Index)2>O<(Index)3> |
| DIN 5513-2007 | 有轨车辆用材料.铝和铝合金 | Materials for rail vehicles - Aluminium and aluminium alloys |
| DIN 5517-1-2003 | 铁路车辆用半成品.可锻铝合金棒材、型材及薄板.第1部分:选择 | Semiproducts for railway vehicles - Bars, profiles and sheet of wrought aluminium alloys - Part 1: Selection |
| DIN 5518-2005 | 铁路车辆用半成品.铝型材.横档 | Semiproduct for railway vehicles - Aluminium profiles - Ledges |
| DIN 5520-2002 | 铁路车辆半成品.铝和精制铝合金板材和带材的弯曲半径 | Semiproducts for rail vehicles - Bending radii for sheet and strip material of aluminium and wrought aluminium alloys |
| DIN 5532-1985 | 有轨车辆用铝合金单头管夹 | Aluminium alloy pipe clips; single ended, with tightening for rail vehicles |
| DIN 55406-2007 | 包装.聚乙烯或聚丙烯制作的单层或双层28mm螺丝盖和铝制28mm保温瓶的交货、购买和使用特殊规范 | Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al) |
| DIN 55436-2-1990 | 包装试验.铝管.管体变形性的测定 | Packaging test; tubes made of aluminium; determination of the deformability of the tube body |
| DIN 55480-1976 | 包装方法.带螺旋盖的铝制圆罐 | Means of packaging; cans made of aluminium with screw caps, round |
| DIN 55531-1988 | 包装用金属箔.叠层铝箔 | Foils for packaging; laminated aluminium foils |
| DIN 55626-18-2007 | 纸和纸板用填充剂和颜料.规范和试验方法.第18部分:沉淀硅铝酸钠 | Extenders and pigments for paper and board - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate |
| DIN 5580-1999 | 有轨车辆的压缩空气装置.铝合金压力罐容器.尺寸和标识 | Compressed air equipment for railway vehicles - Pressure vessels made of aluminium alloys - Dimensions, designation |
| DIN 55923-1983 | 颜料.油漆用铝颜料及铝颜料膏剂.交付技术规范 | Pigments; aluminium pigments and aluminium pigment pastes for paints; technical delivery specifications |
| DIN 6491-1972 | 铝锤 | Aluminium hammers |
| DIN 65033-1990 | 航空航天.铝合金及镁合金锻造件.技术规范(铝合金锻件的新结构不适用) | Aerospace; aluminium- and magnesium-alloy forgings; technical specification |
| DIN 65080-1988 | 航空航天.铝和铝合金的硷浸洗.代号0110 | Aerospace; alkaline pickling of aluminium and aluminium alloys; code number 0110 |
| DIN 65113-1990 | 航空航天；铝和铝塑性合金棒和压制型材.技术规范.不适于新结构 | Aerospace; bars and extruded profiles of aluminium and wrought aluminium alloys; technical specification; inactive for new design |
| DIN 65158-1993 | 航空航天.带平圆头自锁机构的铝合金盲铆钉 | Aerospace; blind rivets of aluminium alloy with flat round head self-locking device |
| DIN 65159-1993 | 航空航天.带自锁机构的100°沉头铝合金盲铆钉 | Aerospace; blind rivets of aluminium alloy with 100° countersunk head and self-locking device |
| DIN 65166-1986 | 航空和航天.锻造铝合金楔形材.技术规范 | Aerospace; wrought aluminium alloy wedge; technical specifications |
| DIN 65186-1990 | 航空航天.锻铝合金薄板和带材制的型材.技术规范.不适用于新设计 | Aerospace; wrought aluminium alloy sheet and strip shaped profiles (sections); technical specification; inactive for new design |
| DIN 65187-1986 | 航空航天.复合材料用带净孔的铝合金嵌件 | Aerospace; inserts for composite materials, with clearance hole, aluminium alloy |
| DIN 65188-1986 | 航空航天.螺钉锁紧嵌件.铝合金复合材料制.带MJ螺纹.小结构封闭式. | Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy |
| DIN 65189-1986 | 航空航天.复合材料用的铝合金制的螺钉锁紧开口式的带MJ螺纹的嵌件 | Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy |
| DIN 65190-1986 | 航空和航天.复合材料用的铝合金制的螺钉锁紧封闭式的带MJ螺纹的嵌件 | Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy |
| DIN 65207-1987 | 航空航天.可锻铝合金薄板折叠型面（截面）的公差 | Aerospace; tolerances for wrougth aluminium alloy folded profiles (sections) |
| DIN 65220-2002 | 航空航天.固定式或可选择式铝槽螺母间距带MJ螺纹自锁螺母的成组槽形螺母组件.分类:1100MPa/120℃ | Aerospace - Gang channel nut assembly, with self-locking nuts, with MJ thread, nut spacing fixed or optional, channel in aluminium; Classification: 1100 MPa/120 °C |
| DIN 65258-1989 | 航空航天.米制系列铝和铝合金100°沉头铆钉 | Aerospace; rivets, 100° countersunk head, aluminium and aluminium alloys; metric series |
| DIN 65259-1989 | 航空航天.米制系列铝和铝合金100°沉头小头铆钉 | Aerospace; rivets, 100° countersunk head, reduced, aluminium and aluminium alloys; metric series |
| DIN 65260-1989 | 航空航天.米制系列铝和铝合金通用头铆钉 | Aerospace; rivets, universal head, aluminium and aluminium alloys; metric series |
| DIN 65355-1987 | 航空航天.米制系列可锻铝合金制铆钉杆套. | Aerospace; collars, metric series, wrought aluminium alloy |
| DIN 65399-1988 | 航空航天.可锻铝合金100°沉头铆钉 | Aerospace; rivets, countersunk 100°, wrought aluminium alloys |
| DIN 65454-1988 | 航空航天.铝和耐蚀钢挤压成型的合页.生产长度的半边合页和合页.轻型系列 | Aerospace; hinges, extruded, in aluminium and corrosion-restisting steel; half-hinges and hinges in manufacturing lengths; light series |
| DIN 65460-1988 | 航空航天.铝和铝合金的酸浸洗.也适用于电阻焊.代号0100 | Aerospace; acid pickling of aluminium and aluminium alloys, also for resistance welding; code number 0100 |
| DIN 65500-1984 | 航空和航天.带MJ螺纹铝合金扁六角螺母 | Aerospace; nuts, hexagon, thin, with MJ-thread, aluminium alloy |
| DIN 65582-1990 | 航空航天.铝和镁合金铸件的热处理 | Aerospace; heat treatment of aluminium- and magnesium-alloy castings |
| DIN 68363-1996 | 铝制果树梯.尺寸、要求和试验 | Aluminium ladders for fruit-trees - Dimensions, requirements and testing |
| DIN 74281-1-2000 | 气压制动设备.压力容器.第1部分:钢和铝制焊接单室压力容器的度量方法 | Air braking systems - Pressure vessels - Part 1: Measures of welded steel and aluminium single chamber pressure vessels |
| DIN 8141-1-1993 | ISO米制螺纹.铝铸造合金的过盈配合用粗牙和细牙螺纹.标称直径5mm至16mm.标称尺寸、尺寸公差和极限偏差 | ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; nominal sizes, tolerances and limits of sizes |
| DIN 8141-2-1993 | ISO米制螺纹.铝铸造合金的过盈配合用粗牙和细牙螺纹.标称直径5mm至16mm.内螺纹和外螺纹量规 | ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; gauges for internal and external threads |
| DIN 9430-1-1984 | 航空航天.轻金属半成品的取样.锻造铝合金、钛和钛合金.概述 | Aerospace; sampling of semi-finished products in light metals; wrought aluminium alloys, titanium and titanium alloys; general |
| DIN 9430-2-1984 | 航空航天.轻金属半成品的取样.锻造铝合金 | Aerospace; sampling of semi-finished products in light metals; wrought aluminium alloys |
| DIN CEN/TS 15412-2006 | 固体回收燃料.测定金属化铝方法 | Solid recovered fuels - Methods for the determination of metallic aluminium; German version CEN/TS 15412:2006 |
| DIN EN 1011-4-2001 | 焊接.焊接金属材料推荐标准.第4部分:铝和铝合金电弧焊 | Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys; German version EN 1011-4:2000 |
| DIN EN 10244-3-2001 | 钢丝和钢丝产品.钢丝有色金属涂层.第3部分:铝涂层 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; German version EN 10244-3:2001 |
| DIN EN 10318-2005 | 锌和铝基金属涂层的厚度和化学成分的测定.常规法 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005 |
| DIN EN 1090-2-2008 | 钢结构和铝结构的实施.第2部分:铝结构用技术要求 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures; German version EN 1090-2:2008 |
| DIN EN 1090-3-2008 | 钢结构和铝结构的实施.第3部分:铝结构用技术要求 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures; English version DIN EN 1090-3:2008-09 |
| DIN EN 1092-4-2002 | 法兰及其连接件.按PN标志的管道、阀门、配件和附件用圆形法兰.第4部分:铝合金法兰; 德文版本 EN 1092-4:200 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges; German version EN 1092-4:2002 |
| DIN EN 12020-1-2008 | 铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第1部分:检验和交货技术条件 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 12020-1:2008-06 |
| DIN EN 12020-2-2008 | 铝和铝合金.EN AW-6060和EN AW-6063合金中挤压的精密型材.第2部分:尺寸和形状公差 | Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form; English version of DIN EN 12020-2:2008-06 |
| DIN EN 12206-1-2004 | 色漆和清漆.建筑用铝和铝合金涂层.第1部分:从涂料粉制备的涂层 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder; German version EN 12206-1:2004 |
| DIN EN 12258-1-1998 | 铝和铝合金.术语和定义.第1部分:一般术语.三种语言的版本 | Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms; Trilingual version EN 12258-1:1998 |
| DIN EN 12258-2-2005 | 铝和铝合金.术语和定义.第2部分:化学分析 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis; Trilingual version EN 12258-2:2004 |
| DIN EN 12258-3-2003 | 铝和铝合金.术语和定义.第3部分:废料 | Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap; Trilingual version EN 12258-3:2003 |
| DIN EN 12258-4-2005 | 铝和铝合金.术语和定义.第4部分:铝工业的残留物 | Aluminium and aluminium alloys - Terms and definitions - Part 4: Residues of the aluminium industry; Trilingual version EN 12258-4:2004 |
| DIN EN 12373-1-2001 | 铝及铝合金.阳极氧化.第1部分:装饰和保护用阳极氧化覆层的规定方法 | Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium; German version EN 12373-1:2001 |
| DIN EN 12373-10-1999 | 铝和铝合金.阳极处理.第10部分:用喷砂试验测量阳极化氧化涂层的特定平均耐磨性能 | Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus; German version EN 12373-10:1998 |
| DIN EN 12373-11-2000 | 铝及铝合金.阳极化处理.第11部分:20 、45、60或85度角阳极氧化层的镜面反射系数和镜面光泽度测量 | Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85°; German version EN 12373-11:2000 |
| DIN EN 12373-12-2000 | 铝及铝合金.阳极化处理.第12部分:用积算球光度表测量铝表面的反射特性 | Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments; German version EN 12373-12:2000 |
| DIN EN 12373-13-2000 | 铝及铝合金.阳极化处理.第13部分:使用测角光度计或滤光测角光度计测量铝表面的反射特性 | Aluminium and aluminium alloys - Anodizing - Part 13: Measurement for reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer; German version EN 12373-13:2000 |
| DIN EN 12373-14-2000 | 铝及铝合金.阳极化处理.第14部分:阳极氧化覆层图像清晰度的目视测定.图表比例尺法 | Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings; Chart scale method; German version EN 12373-14:2000 |
| DIN EN 12373-15-2000 | 铝及铝合金.阳极化处理.第15部分:阳极氧化层耐龟裂变形的评定 | Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; German version EN 12373-15:2000 |
| DIN EN 12373-16-2001 | 铝及铝合金.阳极氧化.第16部分:阳极氧化薄层连续性检查.硫酸铜试验 | Aluminium and aluminium alloys - Anodizing - Part 16: Check for continuity of thin anodic oxidation coatings Copper sulfate test; German version EN 12373-16:2001 |
| DIN EN 12373-17-2001 | 铝及铝合金.阳极氧化.第17部分:电介质击穿潜能测定 | Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential; German version EN 12373-17:2001 |
| DIN EN 12373-18-2001 | 铝及铝合金.阳极氧化.第18部分:斑蚀评定等级系统.图表法 | Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method; German version EN 12373-18:2001 |
| DIN EN 12373-19-2001 | 铝及铝合金.阳极氧化.第19部分:斑蚀评定等级系统.格栅法 | Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method; German version EN 12373-19:2001 |
| DIN EN 12373-2-1999 | 铝和铝合金.阳极处理.第2部分:阳极处理氧化涂层单位面积质量(与面积相关的质量)的测定.重力法 | Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass par unit area (surface density) of anodic oxidation coatings - Gravimetric method; German version EN 12373-2:1998 |
| DIN EN 12373-3-1999 | 铝和铝合金.阳极处理.第3部分:阳极的氧化涂层厚度的测定.用裂隙梁显微镜进行无损测量 | Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings; non-destructive measurement by split-beam-microscope; German version EN 12373-3:1998 |
| DIN EN 12373-4-1999 | 铝和铝合金.阳极处理.第4部分:采用在酸处理之前用着色点滴试验密封后阳极化氧化涂层的吸收力损失量的估计 | Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment; German version EN 12373-4:1998 |
| DIN EN 12373-5-1999 | 铝和铝合金.阳极处理.第5部分:用测量公差方法对密封的阳极处理氧化涂层进行质量评定 | Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance; German version EN 12373-5:1998 |
| DIN EN 12373-6-1999 | 铝和铝合金.阳极处理.第6部分:在预先未进行酸处理情况下涂层在铬酸/磷酸溶液中浸渍以后通过测定质量损耗对 | Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment; German version EN 12373-6:1998 |
| DIN EN 12373-7-2002 | 铝及铝合金.阳极氧化.第7部分:通过磷酸和铬酸溶液浸渍酸处理后测量质量损失评估密封阳极氧化涂层的质量; 德 | Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment; German version EN 12373-7:2002 |
| DIN EN 12373-8-1999 | 铝和铝合金.阳极处理.第8部分:着色阳极氧化处理氧化涂层的耐紫外线和热影响比较牢度的测定 | Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings; German version EN 12373-8:1998 |
| DIN EN 12373-9-1999 | 铝和铝合金.阳极化处理.第9部分:用砂轮磨损试验测量阳极处理氧化涂层的耐磨损性和磨损指数 | Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus; German version EN 12373-9:1998 |
| DIN EN 12375-1998 | 包装.铝软管.管壁厚度的测定方法 | Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:1998 |
| DIN EN 12392-2000 | 铝和铝合金.锻造产品.压力设备生产装备特殊要求 | Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment; German version EN 12392:2000 |
| DIN EN 12441-1-2004 | 锌及锌合金.化学分析.第1部分:锌合金中铝的测定.滴定法 | Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method; German version EN 12441-1:2001 + A1:2004 |
| DIN EN 12441-6-2003 | 锌及锌合金.化学分析.第6部分:铝和铁的测定.火焰原子吸收光谱法 | Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method; German version EN 12441-6:2003 |
| DIN EN 12482-1-1998 | 铝和铝合金.一般用途的粗轧带材.第1部分:热轧粗轧带材的规范 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock; German version EN 12482-1:1998 |
| DIN EN 12482-2-1998 | 铝和铝合金.通用粗轧带材.第2部分:重轧铝胚料的规范 | Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock; German version EN 12482-2:1998 |
| DIN EN 12487-2007 | 金属的腐蚀防护.铝和铝合金上经清洗和未清洗的铬酸盐转化涂层 | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys; English version of DIN EN 12487:2007-07 |
| DIN EN 12517-2-2008 | 接头的无损检验.第2部分:通过射线照相术评估铝及铝合金的焊接接头.验收等级 | Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels; German version EN 12517-2:2008 |
| DIN EN 12816-2001 | 可运输可再充填钢、铝液化石油气瓶.处置 | Transportable refillable steel and aluminium LPG cylinders - Disposal; German version EN 12816:2001 |
| DIN EN 12862-2000 | 可运输气瓶.可再充气可运输的焊接铝合金气瓶的设计和制造规范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders; German version EN 12862:2000 |
| DIN EN 12905-2006 | 人类生活用水处理用产品.膨胀硅铝酸盐 | Products used for treatment of water intended for human consumption - Expanded aluminosilicate; English version of DIN EN 12905:2006 |
| DIN EN 1301-1-2008 | 铝和铝合金.拉制钢丝.第1部分:检验和交付用技术条件 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery; German version EN 1301-1:2008 |
| DIN EN 1301-2-2008 | 铝和铝合金.拉制钢丝.第2部分:机械性能 | Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties; German version EN 1301-2:2008 |
| DIN EN 1301-3-2008 | 铝和铝合金.拉制钢丝.第3部分:尺寸公差 | Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions; German version EN 1301-3:2008 |
| DIN EN 1302-1999 | 饮用水处理用化学品.铝基物絮凝剂.分析法 | Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods; German version EN 1302:1999 |
| DIN EN 13048-2000 | 包装.铝软管.内部清漆薄膜厚度测量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method; German version EN 13048:2000 |
| DIN EN 13110-2003 | 可运输可灌装液化石油气焊接铝瓶.设计和制造 | Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 13110:2002 |
| DIN EN 13445-8-2006 | 非受火压力容器 第8部分:铝和铝合金压力容器附加要求 | Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys; English version of DIN EN 13445-8:2006-12 |
| DIN EN 13480-8-2007 | 金属工业管道.第8部分:铝和铝合金管道的额外要求 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy pipingEnglish version of EIN EN 13480-8:2007-06 |
| DIN EN 137000-1998 | 总规范.配合电动机使用的非固态电解质的固定铝电解交流电容器 | Generic specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors; German version EN 137000:1997 |
| DIN EN 137100-1998 | 分规范.电动机起动器用的非固态电解质的固定铝电解交流电容器.资格认证 | Sectional specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 13710:1997 |
| DIN EN 137101-1998 | 空白详细规范.电动机起动器用的非固态电解质的固定铝电解交流电容器.资格认证 | Blank detail specification - Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval; German version EN 137101:1995 |
| DIN EN 13753-2003 | 饮用水处理用品.粒状活性铝氧土 | Products used for treatment of water intended for human consumption - Granular activated alumina; German version EN 13753:2002 |
| DIN EN 1386-2008 | 铝和铝合金.踏板.规范 | Aluminium and aluminium alloys - Tread plate - Specifications; English version of DIN EN 1386:2008-05 |
| DIN EN 13920-1-2003 | 铝和铝合金.废料.第1部分:一般要求、取样和试验 | Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests; German version EN 13920-1:2003 |
| DIN EN 13920-10-2003 | 铝和铝合金.废料.第10部分:使用过的铝制饮料罐 | Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of used aluminium beverage cans; German version EN 13920-10:2003 |
| DIN EN 13920-11-2003 | 铝和铝合金.废料.第11部分:铝铜散热器废料 | Aluminium and aluminium alloys - Scrap - Part 11: Scrap from aluminium-copper radiators; German version EN 13920-11:2003 |
| DIN EN 13920-12-2003 | 铝和铝合金.废料.第12部分:单一合金车床切屑 | Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy; German version EN 13920-12:2003 |
| DIN EN 13920-13-2003 | 铝和铝合金.废料.第13部分:两种或多种合金混合车床切屑 | Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys; German version EN 13920-13:2003 |
| DIN EN 13920-14-2003 | 铝和铝合金.废料.第14部分:旧的铝制包装件废料 | Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings; German version EN 13920-14:2003 |
| DIN EN 13920-15-2003 | 铝和铝合金.废料.第15部分:去除涂层的用过的铝包装物废料 | Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings; German version EN 13920-15:2003 |
| DIN EN 13920-16-2003 | 铝和铝合金.废料.第16部分:浮渣、碎屑、小金属棒和金属碎粒废料 | Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics; German version EN 13920-16:2003 |
| DIN EN 13920-2-2003 | 铝和铝合金.废料.第2部分:非合金铝废料 | Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap; German version EN 13920-2:2003 |
| DIN EN 13920-3-2003 | 铝和铝合金.废料.第3部分:导线和电缆废料 | Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap; German version EN 13920-3:2003 |
| DIN EN 13920-4-2003 | 铝和铝合金.废料.第4部分:单一锻造合金废料 | Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy; German version EN 13920-4:2003 |
| DIN EN 13920-5-2003 | 铝和铝合金.废料.第5部分:同批两种或多种锻造合金废料 | Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series; German version EN 13920-5:2003 |
| DIN EN 13920-6-2003 | 铝和铝合金.废料.第6部分:两种或多种锻造合金废料 | Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys; German version EN 13920-6:2003 |
| DIN EN 13920-7-2003 | 铝和铝合金.废料.第7部分:铸件废料 | Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings; German version EN 13920-7:2003 |
| DIN EN 13920-8-2003 | 铝和铝合金.废料.第8部分:铝分离用有色金属碎料 | Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes; German version EN 13920-8:2003 |
| DIN EN 13920-9-2003 | 铝和铝合金.废料.第9部分:有色金属碎料经铝分离处理后的剩余废料 | Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials; German version EN 13920-9:2003 |
| DIN EN 13957-2009 | 铝和铝合金.通用挤制圆盘管.规范 | Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification; English version of DIN EN 13957:2009-01 |
| DIN EN 13958-2009 | 铝及铝合金.通用冷拉制圆盘管.规范 | Aluminium and aluminium alloys - Cold drawn, round, coiled tube for general applications - Specification; English version of DIN EN 13958:2009-01 |
| DIN EN 1396-2007 | 铝和铝合金.普通绕涂板材和带材.规范 | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications; English version of DIN EN 1396:2007-04 |
| DIN EN 13981-1-2003 | 铝及铝合金.结构性铁路设施用制品.检验和交换用技术条件.第1部分:挤制产品 | Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 1: Extruded products; German version EN 13981-1:2003 |
| DIN EN 13981-2-2004 | 铝及铝合金.结构性铁路设施用制品的检验和交换用技术条件.第2部分:板和薄板 | Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 2: Plates and sheets; German version EN 13981-2:2004 |
| DIN EN 13981-4-2007 | 铝和铝合金.结构铁路设施用制品.检验和交换用技术条件.第4部分:锻制 | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings; English version of DIN EN 13981-4:2007-02 |
| DIN EN 14095-2004 | 建筑物内的水调节设备.铝阳极电解质处理设备.性能、安全和试验要求 | Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance and safety, testing; German version EN 14095:2003 |
| DIN EN 14121-2003 | 铝和铝合金.电工用铝薄板材、带材和板材 | Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications; German version EN 14121:2003 |
| DIN EN 14242-2004 | 铝和铝合金.化学分析.电感耦合等离子体光学发射光谱分析 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis; German version EN 14242:2004 |
| DIN EN 14286-2008 | 铝和铝合金.危险货物的储存和运输用罐的可焊接轧制品 | Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods; German version EN 14286:2008 |
| DIN EN 14287-2004 | 铝和铝合金.生产包装和包装组件用产品的化学组分的特定要求 | Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components; German version EN 14287:2004 |
| DIN EN 14361-2005 | 铝和铝合金.化学分析.从金属熔体中取样 | Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts; German version EN 14361:2004 |
| DIN EN 14369-2004 | 人类用水处理制品.覆铁粒状活性铝 | Products used for treatment of water intended for human consumption - Iron coated granular activated alumina; German version EN 14369:2003 |
| DIN EN 14391-2004 | 包装.可折叠铝管.危险的触摸警告 | Packaging - Collapsible aluminium tubes - Tactile warnings of danger; German version EN 14391:2004 |
| DIN EN 14392-2008 | 铝和铝合金.与食品接触用阳极制品用要求 | Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff; English version of DIN EN 14392:2008-01 |
| DIN EN 14532-3-2005 | 焊接消耗品.试验方法和质量要求.第3部分:铝合金焊接用焊丝电极、焊丝和焊棒的合格评定 | Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys; German version EN 14532-3:2004 |
| DIN EN 14647 Berichtigung 1-2007 | 铝酸钙水泥.成分、规范和一致性标准 | Calcium aluminate cement - Composition, specifications and conformity criteria; German version EN 14647:2005, Corrigenda to DIN EN 14647:2006-01; German version EN 14647:2005/AC:2006 |
| DIN EN 14647-2006 | 铝酸钙水泥.成分、规范和一致性标准 | Calcium aluminate cement - Composition, specifications and conformity criteria; English version of DIN EN 14647:2005 |
| DIN EN 14726-2005 | 铝和铝合金.化学分析.闪光光发射光谱分析指南.德文版本 EN 14726-2005 | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis; English version of DIN EN 14726:2005 |
| DIN EN 14730-1-2006 | 道路设施.铁轨.铁轨的热铝焊接.第1部分:验收焊接程序 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes; English version of DIN EN 14730-1:2006-10 |
| DIN EN 14730-2-2006 | 道路设施.铁轨.铁轨的热铝焊接.第2部分:热铝焊接工资格、合同验收和确认焊接 | Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds; English version of DIN EN 14730-2:2006-10 |
| DIN EN 14936-1-2006 | 铜和铜合金.测定铝含量.第1部分:滴定法 | Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method English version of DIN EN 14936-1:2006-09 |
| DIN EN 14936-2-2006 | 铜和铜合金.测定铝含量.第2部分:FAAS法 | Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method English version of DIN EN 14936-2:2006-09 |
| DIN EN 15006-2006 | 金属雾化剂罐.铝罐.开口直径25.4 mm | Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture; English version of DIN EN 15006:2006-12 |
| DIN EN 15008-2006 | 雾化剂罐.铝罐.口径25.4mm的单层罐 | Aerosol containers - Aluminium containers - Dimensions of one-piece cans with 25,4 mm aperture; English version of DIN EN 15008:2006-12 |
| DIN EN 15010-2006 | 空气溶胶容器.铝罐.牢固连接基本尺寸公差 | Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch; English version of DIN EN 15010:2006-12 |
| DIN EN 15031-2006 | 游泳池水处理用化学制品.铝基凝血剂 | Chemicals used for treatment of swimming pool water - Aluminium based coagulants English version of DIN EN 15031:2006-08 |
| DIN EN 15088-2006 | 铝和铝合金.施工作业用结构产品.检验和交付技术条件.德文版本EN 15088-2005 | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; English version of DIN EN 15088:2006-03 |
| DIN EN 15206-2007 | 釉瓷和搪瓷.薄钢板、薄铝板和铸铁上搪瓷的测试用试样制备 | Vitreous and porcelain enamels - Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron; German version EN 15206:2007 |
| DIN EN 15384-2008 | 包装.柔性铝管.内部涂层空隙率测定用试验方法 | Packaging - Flexible aluminium tubes - Test method to determine the porosity of the internal coating; English version of DIN EN 15384:2008-01 |
| DIN EN 15421-2008 | 包装.软铝管.内部和外部防护清漆粘结强度的测定 | Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering; English version of DIN EN 15421:2008-02 |
| DIN EN 15530-2008 | 铝和铝合金.铝制品的环境方面.标准中环境内容的一般导则 | Aluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards; German version EN 15530:2008 |
| DIN EN 1559-4-1999 | 铸造.交货技术条件.第4部分:铝合金铸件的附加要求 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings; German version EN 1559-4:1999 |
| DIN EN 1592-1-1997 | 铝和铝合金.HF缝焊管.第1部分:检验和交货技术条件 | Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery; German version EN 1592-1:1997 |
| DIN EN 1592-2-1997 | 铝和铝合金.HF缝焊管.第2部分:机械性能 | Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties; German version EN 1592-2:1997 |
| DIN EN 1592-3-1997 | 铝和铝合金.HF缝焊管.第3部分:圆管尺寸和形状公差 | Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes; German version EN 1592-3:1997 |
| DIN EN 1592-4-1997 | 铝和铝合金.HF缝焊管.第4部分:正方形、长方形和成形管的尺寸和形状公差 | Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes; German version EN 1592-4:1997 |
| DIN EN 1669-1997 | 铝和铝合金.试验方法.薄板和带材的端部花边试验 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip; German version EN 1669:1996 |
| DIN EN 1676-1997 | 铝和铝合金.回炼用合金铝锭.规范 | Aluminium and aluminium alloys - Alloyed aluminium ingots for remelting - Specifications; German version EN 1676:1996 |
| DIN EN 1706-1998 | 铝和铝合金.铸件.化学成份和机械性能 | Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties; German version EN 1706:1997 |
| DIN EN 1715-1-2008 | 铝和铝合金.拉拔坯料.第1部分:检验和交货的一般要求和技术条件 | Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery; German version EN 1715-1:2008 |
| DIN EN 1715-2-2008 | 铝和铝合金.拉拔坯料.第2部分:电器的特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications; German version EN 1715-2:2008 |
| DIN EN 1715-3-2008 | 铝和铝合金.拉制坯料.第3部分:机械用特殊要求(不包括焊接) | Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding); German version EN 1715-3:2008 |
| DIN EN 1715-4-2008 | 铝和铝合金.拉拔坯料.第4部分:焊接用特殊要求 | Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications; German version EN 1715-4:2008 |
| DIN EN 1759-4-2003 | 法兰及其接头.指定类别的管、阀、配件和附件用圆形法兰.第4部分:铝合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges; German version EN 1759-4:2003 |
| DIN EN 1780-1-2003 | 铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第1部分:数字标识系统; 德文版本 EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system; German version EN 1780-1:2002 |
| DIN EN 1780-2-2003 | 铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第2部分:基于标识系统的化学符号; 德文版本 EN 1780-2:200 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system; German version EN 1780-2:2002 |
| DIN EN 1780-3-2003 | 铝和铝合金.重熔、母合金和铸件用合金铝锭的标识.第3部分:化学成分的书面规则; 德文版本 EN 1780-3:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition; German version EN 1780-3:2002 |
| DIN EN 1802-2002 | 可运输式储气瓶.无缝铝合金储气瓶的周期性检验和测试; 德文版本 EN 1802:2002 | Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders; German version EN 1802:2002 |
| DIN EN 1967-2003 | 结构胶粘剂.用湿剥离试验结合导向托辊试验评价铝表面处理技术的有效性 | Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method; German version EN 1967:2002 |
| DIN EN 1975-2004 | 移动式气瓶.容量从0.5升至150升的铝和铝合金制可再填充便携式无缝气瓶的设计和构造规范 | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres; German version EN 1975:1999 + A1:2003 |
| DIN EN 1999-1-2-2007 | 欧洲法规9:铝结构件的设计.第1-2部分:构件的防火设计 | Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design English version of DIN EN 1999-1-2:2007-05 |
| DIN EN 2004-1-1993 | 航空航天系列.铝和铝合金制品的检验方法.第1部分：锻铝合金导电率的测定 | Aerospace series; test methods for aluminium and aluminium alloy products; part 1: determination of electrical conductivity of wrought aluminium alloys; German version EN 2004-1:1993 |
| DIN EN 2004-5-1993 | 航空和航天.铝和铝合金产品的检验方法.第5部分：电镀半成品时测定镀层厚度和铜渗析 | Aerospace series; test methods for aluminium and aluminium alloy products; part 5: determination of cladding thickness and copper diffusion of clad semi-finished products; German version EN 2004-5:1993 |
| DIN EN 2044-2003 | 航空航天系列.公差等级h11、直径4mm D 63mm的铝及铝合金拉制圆棒材. 尺寸 | Aerospace series - Round bars, drawn, in aluminium and aluminium alloys, tolerance class h11, diameter 4 mmD63 mm - Dimensions; German and English version EN 2044:2001 |
| DIN EN 2045-2003 | 航空航天系列.公差等级h11、厚度6mm a 50mm的铝及铝合金拉制方棒.尺寸 | Aerospace series - Square bars, drawn, in aluminium and aluminium alloys, tolerance class h11, thickness 6 mma50 mm - Dimensions; German and English version EN 2045:2001 |
| DIN EN 2046-2003 | 航空航天系列.公差等级h11.对边宽度7mm a 50mm的铝及铝合金拉制六角形棒材.尺寸 | Aerospace series - Hexagonal bars, drawn, in aluminium and aluminium alloys, tolerance class h11, width across flats 7 mma50 mm - Dimensions; German and English version EN 2046:2001 |
| DIN EN 2047-2002 | 航空航天系列.铝合金挤制粒状L形型材.尺寸 | Aerospace series - Beaded L-section, extruded in aluminium alloys - Dimensions; German and English version EN 2047:2001 |
| DIN EN 2048-2002 | 航空航天系列.铝合金L形挤压型材.尺寸 | Aerospace series - Extruded L-section, extruded in aluminium alloys - Dimensions; German and English version EN 2048:2001 |
| DIN EN 2049-2002 | 航空航天系列.铝合金挤制槽形型材.尺寸 | Aerospace series - Extruded channel section, exruded in aluminium alloys - Dimensions; German and English version EN 2049:2001 |
| DIN EN 2050-2002 | 航空航天系列.铝合金挤制T形型材.尺寸 | Aerospace series - Extruded T-section, in aluminium alloys - Dimensions; German and English version EN 2050:2001 |
| DIN EN 2066-2003 | 航空航天系列.铝合金挤压型材.通用公差 | Aerospace series - Extruded section in aluminium alloys - General tolerances; German and English version EN 2066:2001 |
| DIN EN 2070-1-1990 | 航空航天.精制铝和铝合金制品.技术规范.第1部分:一般要求; 德文版本 EN 2070-1:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; german version EN 2070-1:1989 |
| DIN EN 2070-1/A1-1993 | 航空航天系列.铝和铝合金锻造产品.技术规范.第1部分:一般要求 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements; German version EN 2070-1/A1:1993; amendment 1 |
| DIN EN 2070-2-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第2部分:薄板、带材、型材和板材; 德文版本 EN 2070-2:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 2: sheet, strip formed profiles and plate; german version EN 2070-2:1989 |
| DIN EN 2070-3-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第3部分:棒材和型材; 德文版本 EN 2070-3:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 3: bar and section; german version EN 2070-3:1989 |
| DIN EN 2070-4-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第4部分:结构管材; 德文版本 EN 2070-4:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 4: tube for structures; german version EN 2070-4:1989 |
| DIN EN 2070-5-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第5部分:受压管材; 德文版本 EN 2070-5:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 5: tube used under pressure; german version EN 2070-5:1989 |
| DIN EN 2070-6-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第6部分:铆钉用丝材; 德文版本 EN 2070-6:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 6: rivet wire; german version EN 2070-6:1989 |
| DIN EN 2070-7-1990 | 航空航天系列.铝和铝合金的精制产品.技术规范.第7部分:精锻坯料; 德文版本 EN 2070-7:1989 | Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 7: wrought forging stock; german version EN 2070-7:1989 |
| DIN EN 2071-2003 | 航空航天系列.厚度0.25mm a 6mm的铝及铝合金板材.尺寸 | Aerospace series - Sheets in aluminium and aluminium alloys, thickness 0,25 mma6 mm - Dimensions; German and English version EN 2071:2001 |
| DIN EN 2072-2007 | 航空航天系列.AL-P1050A-H14铝合金.薄板与带材.0.4≥a≥6mm | Aerospace series - Aluminium AL-P1050A-H14 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 2072:2005 |
| DIN EN 2076-1-1990 | 航空航天.铝.镁合金铸件和铸锭.技术规范.第1部分:一般要求 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; german version EN 2076-1:1989 |
| DIN EN 2076-1/A1-1993 | 航空航天系列.铝和镁合金锭和铸件.技术规范.第1部分:一般要求 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements; German version EN 2076-1/A1:1993; amendment 1 |
| DIN EN 2076-2-1990 | 航空航天.铝.镁合金铸件和铸锭.交货技术条件.第2部分:再熔炼用铸锭 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 2: ingots for remelting; german version EN 2076-2:1989 |
| DIN EN 2076-3-1990 | 航空航天.铝.镁合金铸件和铸锭.交货技术条件.第3部分:试制铸件和连铸件 | Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 3: pre-production and production castings; german version EN 2076-3:1989 |
| DIN EN 2082-1-1990 | 航空航天系列.铝合金锻坯和锻件.技术规范.第1部分:一般要求 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; german version EN 2082-1:1989 |
| DIN EN 2082-1/A1-1993 | 航空航天系列.铝合金锻坯和锻件.技术规范.第1部分:一般要求 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements; German version EN 2082-1/A1:1993; amendment 1 |
| DIN EN 2082-2-1990 | 航空航天系列.铝合金锻造坯料和锻件.技术规范.第2部分:锻造坯料 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 2: forging stock; german version EN 2082-2:1989 |
| DIN EN 2082-3-1990 | 航空航天系列.铝合金锻造坯料和锻件.技术规范.第3部分:试生产和批生产锻件 | Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 3: preproduction and production forgings; german version EN 2082-3:1989 |
| DIN EN 2085-2007 | 航空航天系列.AL-P2618A-T6型铝合金.自由锻件和模锻件.a≤150mm | Aerospace series - Aluminium alloy AL-P2618A-T6 - Hand and die forgings - a≤ 150 mm; German and English version EN 2085:2004 |
| DIN EN 2086-2006 | 航空航天系列.铝合金AL-P2618A-T851.手锻和模锻件.a ≤150 mm | Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2086:2004 |
| DIN EN 2087-2006 | 航空航天系列.铝合金 AL-P2014A .T6 或T62.覆层铝合金板材及带材.0.4mm≤a≤6mm.德文和英文版本EN 2087-200 | Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2087:2005 |
| DIN EN 2088-2007 | 航空航天系列.AL-P2014A-T4或T42型铝合金铠装薄材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Clad sheet and strip - 0,4 mm a 6 mm; German and English version EN 2088:2005 |
| DIN EN 2089-2007 | 航空航天系列.AL-P2014A-T6或T62型铝合金.薄板材和带材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2089:2005 |
| DIN EN 2090-2006 | 航空航天系列.铝合金AL-P2024-T3.覆层板材及带材.0.3mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip 0,3 mm a 6 mm; German and English version EN 2090:2005 |
| DIN EN 2092-2006 | 航空航天系列.AL-P7075-T6或T62铝合金.层覆薄板及带材.0.4mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2092:2005 |
| DIN EN 2093-1993 | 航空航天.AL-P709-T74铝合金.20mm≤a≤150mm.手制锻件. | Aerospace series; aluminium alloy AL-P7009-T74; hand forgings 20 mm a 150 mm; German version EN 2093:1992 |
| DIN EN 2094-1993 | 航空航天.AL-P7009-T74铝合金.3mm≤a≤150mm模锻件 | Aerospace series; aluminium alloy AL-P7009-T74; die forgings 3 mm a 150 mm; German version EN 2094:1992 |
| DIN EN 2100-1992 | 航空航天.AL-P2014A-T4511铝合金.a或D≤200mm 的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P2014A-T4511; extruded bars and sections a or D 200 mm; german version EN 2100:1992 |
| DIN EN 2101-1991 | 航空航天.铝和锻铝合金的铬酸阳极氧化 | Aerospace series; chromic acid anodizing of aluminium and wrought aluminium alloys; german version EN 2101:1991 |
| DIN EN 2122-1996 | 航空航天系列.阳极处理和铬酸钝化铝合金平垫圈 | Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated; German version EN 2122:1996 |
| DIN EN 2126-1993 | 航空航天.AL-P7075-T651铝合金.6mm∠a≤800mm中厚板材 | Aerospace series; aluminium alloy AL-P7075-T651; plate 6 mm a 80 mm; German version EN 2126:1992 |
| DIN EN 2127-1993 | 航空航天.AL-P7075-T73511铝合金.a或D≤100mm的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P7075-T73511; extruded bars and sections a or D 100 mm; German version EN 2127:1992 |
| DIN EN 2128-1993 | 航空航天.AL-P7075-T73511铝合金.6mm≤a或D≤75mm 拉制棒材 | Aerospace series; aluminium alloy AL-P7075-T73511; drawn bars 6 mm a or D 75 mm; German version EN 2128:1992 |
| DIN EN 2131-2003 | 航空航天系列.厚度6mm a 160mm的铝合金板.尺寸 | Aerospace series - Plates in aluminium alloys, thickness 6 mma160 mm - Dimensions; German and English version EN 2131:2001 |
| DIN EN 2134-2003 | 航空航天系列.直径10mm D 220mm的铝及铝合金挤压圆棒材.尺寸 | Aerospace series - Round bars, extruded in aluminium and aluminium alloys, diameter 10 mmD220 mm - Dimensions; German and English version EN 2134:2001 |
| DIN EN 2143-1993 | 航空航天.英寸系列1050A铝制通用头实心铆钉 | Aerospace series; rivets, solid, universal head, in aluminium 1050A, inch based series; german version EN 2143:1992 |
| DIN EN 2144-1994 | 航空航天系列.英制系列铝合金 2117 通用头实心铆钉; 德文版本 EN 2144:1994 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series; German version EN 2144:1994 |
| DIN EN 2145-1994 | 航空航天系列.英制系列阳极氧化或铬酸钝化铝合金 2117 通用头全铆钉; 德文版本 EN 2145:1994 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series; German version EN 2145:1994 |
| DIN EN 2146-1993 | 航空航天系列.英寸系列2017A铝合金通用头实心铆钉 | Aerospace series; rivets, solid, universal head, in aluminium alloy 2017A, inch based series; german version EN 2146:1992 |
| DIN EN 2148-1993 | 航空航天系列.英寸系列5056A铝合金通用头实心铆钉 | Aerospace series; rivets, solid, universal head, in aluminium alloy 5056A, inch based series; german version EN 2148:1992 |
| DIN EN 2149-1996 | 航空航天系列.英制系列5056A铝合金阳极氧化或铬酸钝化普通头实心铆钉 | Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodised or chromated, inch based series; German version EN 2149:1996 |
| DIN EN 2256-2006 | 航空航天系列.铝合金AL-P2618A-T852.手锻和模锻件.a ≤150 mm | Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2256:2004 |
| DIN EN 2257-1997 | 航空和航天.铝和铝合金制结构圆管.直径6mm=<100mm,壁厚1mm=<6mm.尺寸 | Aerospace series - Circular tubes for structures in aluminium and aluminium alloys; diameter 6 mm D 100 mm, thickness 1 mm a 6 mm; dimensions; German version EN 2257:1997 |
| DIN EN 2258-1997 | 航空和航天.铝和铝合金制圆形管道.直径3.2mm=<100mm,壁厚0.6mm=<2.5mm.尺寸 | Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys; diameter 3,2 mm D 100 mm, thickness 0,6 mm a 2,5 mm; dimensions; German version EN 2258:1997 |
| DIN EN 2284-1991 | 航空航天.铝和锻铝合金的硫酸阳极氧化 | Aerospace series; sulphuric acid anodizing of aluminium and wrougth aluminium alloys; german version EN 2284:1991 |
| DIN EN 2285-1990 | 航空航天系列.带自润滑衬料的铝合金制普通衬套.尺寸和负载 | Aerospace series; bushes plain, aluminium alloy, with self-lubricating liner; dimensions and loads; german version EN 2285:1989 |
| DIN EN 2286-1990 | 航空航天系列.带自润滑衬料的铝合金制有法兰衬套.尺寸和负载 | Aerospace series; bushes flanged, aluminium alloy, with self-lubricating liner; dimensions and loads; German version EN 2286:1989 |
| DIN EN 2289-1996 | 航空航天系列.飞行控制用铝合金制棒料.交货技术条件 | Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification; German version EN 2289:1996 |
| DIN EN 2290-1-1998 | 航空航天系列.可调节控制杆端部接头的铝合金飞行控制杆体.第1部分:尺寸和负载 | Aerospace series - Rod bodies flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads; German version EN 2290-1:1998 |
| DIN EN 2318-1993 | 航空航天.AL-P2024-T3511铝合金.1,2mm≤a或D≤150mm 挤压棒材和型材 | Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1,2 mm a or D 150 mm; German version EN 2318:1992 |
| DIN EN 2326-1992 | 航空航天.AL-P6082-T6铝合金.a 或D≤200mm 的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections a or D 200 mm; german version EN 2326:1992 |
| DIN EN 2334-1997 | 航空航天系列.铝和铝合金铬硫酸酸洗 | Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys; German version EN 2334:1997 |
| DIN EN 2365-1989 | 航空航天.铝合金铆钉套环 | Aerospace; collars, aluminium alloy; german version EN 2365:1989 |
| DIN EN 2381-1993 | 航空航天.AL-P7009-T7452铝合金.40mm≤a≤150mm自由锻件 | Aerospace series; aluminium alloy AL-P7009-T7452; hand forgings 40 mm a 150 mm; German version EN 2381:1992 |
| DIN EN 2384-1992 | 航空航天.AL-P2014A-T6511铝合金.a或D≤150mm 的挤压棒材和型材 | Aerospace series; aluminium alloy AL-P2014A-T6511; extruded bars and sections a or D 150 mm; german version EN 2384:1992 |
| DIN EN 2385-1993 | 航空航天.AL-P7009-T74511铝合金.a或D≤12.5mm挤压棒材和型材 | Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections a or D 125 mm; German version EN 2385:1992 |
| DIN EN 2395-2006 | 航空航天.AL-P2014A-T4或T42铝合金.薄板材和带材.0.4mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2395:2005 |
| DIN EN 2422-2006 | 航空航天系列.铝合金AL-P2124-T351.板材.25mm | Aerospace series - Aluminium alloy AL-P2124-T351 - Plate - 25 mm ＜ a ≤ 120 mm; German and English version EN 2422:2005 |
| DIN EN 2437-2003 | 航空航天系列.铝及铝合金铬酸盐转化涂层(黄色) | Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys; German and English version EN 2437:2001 |
| DIN EN 2486-2006 | 航天航空系列.AL-P2618A 型铝合金.锻坯件.德文和英文版本EN 2486-2005 | Aerospace series - Aluminium alloy AL-P2618A - Forging stock; German and English version EN 2486:2005 |
| DIN EN 2511-2006 | 航空航天系列.铝合金AL-P7075-T7351.板材.6mm | Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate - 6 mm a 100 mm; German and English version EN 2511:2005 |
| DIN EN 2536-1995 | 航空航天系列.铝合金的淬硬阳极氧化处理; 德文版本 EN 2536:1995 | Aerospace series - Hard anodizing of aluminium alloys; German version EN 2536:1995 |
| DIN EN 2550-1993 | 航空航天系列.英寸系列1050A铝100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head, in aluminium 1050A, inch based series; german version EN 2550:1992 |
| DIN EN 2551-1993 | 航空航天系列.英寸系列2117A铝合金拱顶100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, inch based series; german version EN 2551:1992 |
| DIN EN 2552-1993 | 航空航天.英寸系列2117A铝合金拱顶100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2117, anodised or chromated, inch based series; german version EN 2552:1992 |
| DIN EN 2553-1993 | 航空航天.英寸系列2017A铝合金拱顶100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 2017A, inch based series; german version EN 2553:1992 |
| DIN EN 2555-1993 | 航空航天.英寸系列5056A铝合金拱顶100°普通沉头实心铆钉 | Aerospace series; rivets, solid, 100° normal countersunk head with dome, in aluminium alloy 5056A, inch based series; german version EN 2555:1992 |
| DIN EN 2599-2002 | 航空航天系列.铝和铝合金带材.厚度a为0.25mm-3.2mm.尺寸 | Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0,25 mm a 3,2 mm; Dimensions; German version EN 2599:2001 |
| DIN EN 2630-1994 | 航空航天系列.AL-P7009-T74511铝合金.带外围粗糙颗粒控制设备的挤压棒材和型材.a或D为125mm | Aerospace series; aluminium alloy AL-P7009-T74511; extruded bars and sections; a or D 125 mm, with peripheral coarse grain control; German version EN 2630:1993 |
| DIN EN 2632-2007 | 航空航天系列.铝合金AL-P7075-T73511.挤压棒材和型材.带周边粗晶粒控制的.a或D≤100mm | Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 2632:2005 |
| DIN EN 2633-1994 | 航空航天系列.铝合金AL-P2024-T3511;挤压棒材和截面：1,2 mm a或D 150 mm,周边粗 | Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections; 1,2 mm a or D 150 mm, with peripheral coarse grain control; German version EN 2633:1993 |
| DIN EN 2635-2006 | 航空航天系列.铝合金AL-P2014A.T6511.挤压棒材和型材.a/D≤200mm周边粗粒控制 | Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bar and section - a or D 200 mm with peripheral coarse grain control; German and English version EN 2635:2005 |
| DIN EN 2636-1994 | 航空航天系列.AL-P6082-T6铝合金.带外围粗糙颗粒控制设备的挤压棒材和型材.a或D为200mm | Aerospace series; aluminium alloy AL-P6082-T6; extruded bars and sections; a or D 200 mm, with peripheral coarse grain control; German version EN 2636:1993 |
| DIN EN 2681-2006 | 航空航天系列.铝合金AL-P7010-T74.手锻和模锻件.a ≤150 mm | Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings - a ≤ 150 mm; German and English version EN 2681:2004 |
| DIN EN 2684-2006 | 航空航天系列.铝合金AL-P2124-T351.板材.6mm | Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate - 6 mm ＜ a ≤ 140 mm; German and English version EN 2684:2004 |
| DIN EN 2687-2006 | 航空航天系列.铝合金AL-P7010-T7451.板材.6mm | Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate - 6 mm ＜ a ≤ 160 mm; German and English version EN 2687:2004 |
| DIN EN 2693-2006 | 航空航天系列.铝合金AL-P5086-H111.薄板和带材.0.3mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P5086-H111 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2693:2005 |
| DIN EN 2694-2006 | 航空航天系列.铝合金AL-P6061-T6或T62.薄板材和带材.0.4mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2694:2005 |
| DIN EN 2695-2006 | 航空航天系列.铝合金AL-P6081-T6.薄板和带材.0.3mm<=a<=6mm | Aerospace series - Aluminium alloy AL-P6081-T6 - Sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2695:2005 |
| DIN EN 2696-2006 | 航空航天系列.铝合金AL-P7075-T6或T62.薄板材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 2696:2005 |
| DIN EN 2702-2006 | 航空航天系列.铝合金AL-P6061.T6或T62.拉制或挤压棒材和型材.a或D<=200mm | Aerospace series - Aluminium alloy AL-P6061 - T6 or T62 - Drawn or extruded bar and section - a or D 200 mm; German and English version EN 2702:2005 |
| DIN EN 2703-2006 | 航空航天系列.铝合金AL-P2024-T4或T42.覆层薄板和带材.0.3mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Clad sheet and strip - 0,3 mm ≤ a ≤ 6 mm; German and English version EN 2703:2005 |
| DIN EN 2802-2005 | 航空航天系列.铝合金AL-P7475-T761.薄板和带材.0.6 mm a 6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip - 0,6 mm a 6 mm; German and English version EN 2802:2005 |
| DIN EN 2803-2005 | 航空航天系列.铝合金AL-P7475-T761.覆层薄板和带材.1.0 mm a 6 mm | Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 2803:2005 |
| DIN EN 286-4-1994 | 装空气和氮气用的简单的不受燃烧加热的压力容器.第4部分:轨道车辆中空气制动设备和气动辅助装置用铝合金制 | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock; German version EN 286-4:1994 |
| DIN EN 2912-1996 | 航空航天系列.铝合金阳极化或铬酸钝化的大外径平垫圈 | Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated; German version EN 2912:1996 |
| DIN EN 29658-1992 | 钢.铝含量的测量.火焰原子吸收分光光度法 | Determination of aluminium content of steel by flame atomic absorption spectrometry (ISO 9658:1990); german version EN 29658:1991 |
| DIN EN 3332-2006 | 航空航天系列.铝合金AL-P7475-T762.覆层板材及带材.1.0mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip - 1,0 mm a 6 mm; German and English version EN 3332:2005 |
| DIN EN 3333-2006 | 铝合金AL-P7475-T762.薄板和带材.0.6mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip - 0,6 mm a 6 mm; German and English version EN 3333:2005 |
| DIN EN 3335-2006 | 航空航天系列.铝合金AL.P7475-O2.超塑成形薄板材(SPF).0.8mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm; German and English version EN 3335:2005 |
| DIN EN 3338-2006 | 航空航天系列.铝合金AL-P7050-T74511.挤压棒材和型材.a或D<=150mm周边晶粒控制 | Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3338:2005 |
| DIN EN 3339-2007 | 航天航空系列.AL-P7010-T76型铝合金.模锻件.a≤200mm | Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a 200 mm; German and English version EN 3339:2006 |
| DIN EN 3341-2006 | 航空航天系列.铝合金AL-P6061-T4或T42.薄板材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 3341:2005 |
| DIN EN 3342-2006 | 航空航天系列.铝合金AL-P6061-T4或T42.挤压棒材和型材.a或D<=150mm | Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D 150 mm; German and English version EN 3342:2005 |
| DIN EN 3344-2006 | 航空航天系列.铝合金AL-P7050-T76511.挤压棒和型材.a或D<= 150 mm周边粗粒控制 | Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3344:2005 |
| DIN EN 3347-2006 | 航空航天系列.铝合金AL-P2024-T8511.挤压棒材和型材.a/D≤150mm周边粗粒控制 | Aerospace series - Aluminium alloy AL-P2024-T8511 - Extruded bar and section - a or D 150 mm with peripheral coarse grain control; German and English version EN 3347:2005 |
| DIN EN 3474-2006 | 航空航天系列.铝合金AL-P2024-T81.薄板材和带材.0.25mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm a 6 mm; German and English version EN 3474:2005 |
| DIN EN 3552-2006 | 航空航天系列.铝合金AL-P2618A-T6或T62.覆层薄板和带材.0.4mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2618A-T6 or T62 - Clad sheet and strip - 0,4 mm ≤ a ≤ 6 mm; German and English version EN 3552:2005 |
| DIN EN 3553-2006 | 航空航天系列.铝合金AL-P2618A-T6511.挤压棒材和型材.a/D≤160 mm | Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section - a or D ≤ 160 mm; German and English version EN 3553:2004 |
| DIN EN 3665-1997 | 航空航天系列.清漆和涂料试验方法.铝合金耐纤维状腐蚀试验 | Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys; German version EN 3665:1997 |
| DIN EN 3719-2006 | 航空航天系列.电缆的铝或铝合金导体.产品标准 | Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard; German and English version EN 3719:2005 |
| DIN EN 3730-2003 | 航空航天系列.带橡胶垫圈的铝合金固定和滑动支架夹具.尺寸和质量 | Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 3730:2001 |
| DIN EN 3869-2007 | 航空和航天系列.管道联接件、活动法兰和密封件.铝合金碳氟橡胶和电枢密封件 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; German and English version EN 3869:2004 |
| DIN EN 3872-2005 | 航空航天系列.铝合金AL-R39002-H112.模锻件.a 200 mm | Aerospace series - Aluminium alloy AL-R39002-H112 - Die forgings - a 200 mm; German and English version EN 3872:2005 |
| DIN EN 3979-2006 | 航空航天系列.铝合金AL-P8090-O2.超塑性成型(SPF)用薄板.0.8mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P8090-O2 - Sheet for superplastic forming (SPF) - 0,8 mm a 6 mm; German and English version EN 3979:2005 |
| DIN EN 3997-2007 | 航空航天系列.AL-P2024-T3型铝合金.0.4mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm; German and English version EN 3997:2007 |
| DIN EN 3998-2007 | 航空航天系列.AL-P2024-T4或T42型铝合金.0.3mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm ≤ a ≤ 6 mm; German and English version EN 3998:2007 |
| DIN EN 3999-2007 | 航空航天系列.AL-P2024-T351型铝合金.改进化学铣削性能的镀铝薄板材和带材.1.6mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2024-T351 - Sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm; German and English version EN 3999:2007 |
| DIN EN 40-6-2002 | 灯柱.第6部分:铝制灯柱要求; 德文版本 EN 40-6:2002 | Lighting columns - Part 6: Requirements for aluminium lighting columns; German version EN 40-6:2002 |
| DIN EN 4001-2007 | 航空航天系列.AL-P2024-T351型铝合金.改进的化学铣削性能1.6mm≤a≤6mm的镀铝薄板材和带材 | Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm ≤ a ≤ 6 mm; German and English version EN 4001:2007 |
| DIN EN 4002-2007 | 航空航天系列.AL-P2219-T81型铝合金.薄板材和带材.0.5mm≤a≤6mm | Aerospace series - Aluminium alloy AL-P2219-T81 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm; German and English version EN 4002:2007 |
| DIN EN 4003-2007 | 航空航天系列.AL-P2219-T87型铝合金.0.5mm≤a≤6mm的薄板材和带材. | Aerospace series - Aluminium alloy AL-P2219-T87 - Sheet and strip 0,5 mm ≤ a ≤ 6 mm; German and English version EN 4003:2006 |
| DIN EN 4004-2007 | 航空航天系列.AL-P3103-H16型铝合金.0.4mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm; German and English version EN 4004:2007 |
| DIN EN 4005-2007 | 航空航天系列.AL-P5052-0型铝合金.0.3mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm ≤ a ≤ 6 mm; German and English version EN 4005:2007 |
| DIN EN 4006-2007 | 航空航天系列.AL-P6082-T4或T42型铝合金.0.4mm≤a≤6mm的薄板材和带材 | Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm ≤ a ≤ 6 mm; German and English version EN 4006:2007 |
| DIN EN 4007-2006 | 航空航天系列.铝合金AL-P6082.T6或T62.薄板材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P6082-T6 or T62 - Sheet and strip - 0,4 mm a 6 mm; German and English version EN 4007:2005 |
| DIN EN 4049-003-2008 | 航空航天系列.热电偶延伸电缆.工作温度为-65℃～260℃.第003部分:单芯镍铬/镍铝.产品标准 | Aerospace series - Thermocouple extension cable - Operating temperatures between -65 °C to 260 °C - Part 003: Single core nickel chromium/nickel aluminium - Product standard; German and English version EN 4049-003:2006 |
| DIN EN 4049-004-2008 | 航空航天系列.热电偶延伸电缆.工作温度为-65℃～260℃.第004部分:屏蔽的和置于壳内的双芯镍铬/镍铝电缆.产 | Aerospace series - Thermocouple extension cable - Operating temperatures between -65 °C to 260 °C - Part 004: Two core nickel chromium/nickel aluminium shielded and jacketed - Product standard; German and English version EN 4049-004:2006 |
| DIN EN 4054-2006 | 航空航天系列.管连接件、活动法兰和密封件.氟烃橡胶密封件和铝合金附件.技术规范 | Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification; German and English version EN 4054:2004 |
| DIN EN 4099-2005 | 航空航天系列.铝合金AL-P2219-T6或T62.涂覆薄板材和带材.0.5 mm a 6 mm | Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Clad sheet and strip - 0,5 mm a 6 mm; German and English version EN 4099:2005 |
| DIN EN 4100-2006 | 航空航天系列.铝合金AL-P2219-T6或T62.薄板材和带材.0.5mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P2219-T6 or T62 - Sheet and strip - 0,5 mm a 6 mm; German and English version EN 4100:2005 |
| DIN EN 4101-2006 | 航空航天系列.铝合金AL-P2024-T4.改善拉伸变形能力的薄板材和带材.0.4mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P2024-T4 - Sheet and strip with improved stretch forming capability - 0,4 mm a 6 mm; German and English version EN 4101:2005 |
| DIN EN 4102-2006 | 航空航天系列.铝合金AL-P2219.T81.覆层板材及带材.0.5mm≥a≥6mm;德文和英文版本EN 4102-2005 | Aerospace series - Aluminium alloy AL-P2219-T81 - Clad sheet and strip - 0,5 mm a 6 mm; German and English version EN 4102:2005 |
| DIN EN 4114-2003 | 航空航天系列.带橡胶垫圈的铝合金环状夹具("P" 型).尺寸和质量 | Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses; German and English version EN 4114:2001 |
| DIN EN 4174-2006 | 航天航空系列.阳极电镀或铬酸盐处理铝合金2024米制系列、连接模压锁紧凹头紧固件 | Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series; German and English version EN 4174:2006 |
| DIN EN 4176-2007 | 航空航天系列.阳极电镀或热镀铝法的TI-P6400钛合金紧公差拉紧/剪切式100°埋头标准头钉紧螺栓.TI-P99002钛 | Aerospace series - Lockbolts, 100° countersunk normal head or protruding head, tension-/sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification; German and English version EN 4176:2005 |
| DIN EN 4202-2005 | 航空航天系列.铝合金AL-P6082-T651.板材.6 mm a 25 mm | Aerospace series - Aluminium alloy AL-P6082-T651 - Plate - 6 mm a 25 mm; German and English version EN 4202:2005 |
| DIN EN 4203-2006 | 航空航天系列.铝合金AL-P8090-T89.板材.0.6mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Sheet - 0,6 mm ≤ a ≤ 6 mm; German and English version EN 4203:2005 |
| DIN EN 4204-2006 | 航空航天系列.铝合金AL-P8090-T841.薄板材.0.6mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P8090-T841 - Sheet - 0,6 mm a 6 mm; German and English version EN 4204:2005 |
| DIN EN 4209-2005 | 航空航天系列.铝合金AL-P2219-T851.板材.6 mm a 50 mm | Aerospace series - Aluminium alloy AL-P2219-T851 - Plate - 6 mm a 50 mm; German and English version EN 4209:2005 |
| DIN EN 4211-2005 | 航空航天系列.铝合金AL-P2024-T42.涂覆板材.6 mm a 25 mm | Aerospace series - Aluminium alloy AL-P2024-T42 - Clad plate - 6 mm a 25 mm; German and English version EN 4211:2005 |
| DIN EN 4212-2005 | 航空航天系列.铝合金AL-P5086-H111.板材.6 mm a 80 mm | Aerospace series - Aluminium alloy AL-P5086-H111 - Plate - 6 mm a 80 mm; German and English version EN 4212:2005 |
| DIN EN 4213-2005 | 航空航天系列.铝合金AL-P6061-T651.板材.6 mm a 80 mm | Aerospace series - Aluminium alloy AL-P6061-T651 - Plate - 6 mm a 80 mm; German and English version EN 4213:2005 |
| DIN EN 4214-2005 | 航空航天系列.铝合金AL-P7010-T651.板材.6 mm a 20 mm | Aerospace series - Aluminium alloy AL-P7010-T651 - Plate - 6 mm a 20 mm; German and English version EN 4214:2005 |
| DIN EN 4215-2005 | 航空航天系列.铝合金AL-P7175-T651.板材.6 mm a 80 mm | Aerospace series - Aluminium alloy AL-P7175-T651 - Plate - 6 mm a 80 mm; German and English version EN 4215:2005 |
| DIN EN 4247-2006 | 航空航天系列.铝合金AL-P2024-T42.厚板材.6mm | Aerospace series - Aluminium alloy AL-P2024-T42 - Plate - 6 mm a 140 mm; German and English version EN 4247:2005 |
| DIN EN 4283-2006 | 航空航天系列.铝合金AL-P2219-T87.厚板材.6mm | Aerospace series - Aluminium alloy AL-P2219-T87 - Plate - 6 mm a 40 mm; German and English version EN 4283:2005 |
| DIN EN 4286-2006 | 航空航天系列.铝合金AL-P8090-T89.模锻件.a≤125mm | Aerospace series - Aluminium alloy AL-P8090-T89 - Die forgings - a ≤ 125 mm; German and English version EN 4286:2005 |
| DIN EN 4287-2006 | 航空航天系列.铝合金AL-P7010.锻坯 | Aerospace series - Aluminium alloy AL-P7010 - Forging stock; German and English version EN 4287:2005 |
| DIN EN 4291-2006 | 航空航天系列.铝合金AL-P8090.锻坯 | Aerospace series - Aluminium alloy AL-P8090 - Forging stock; German and English version EN 4291:2005 |
| DIN EN 4292-2006 | 航空航天系列.铝合金AL-R39002.锻坯 | Aerospace series - Aluminium alloy AL-R39002 - Forging stock; German and English version EN 4292:2005 |
| DIN EN 4312-2007 | 航空和航天系列.钝化铝合金涂层耐腐蚀耐热中长螺纹粗公差递减柄螺栓.等级:1100MPa(室温下)/315℃ | Aerospace series - Studs, coarse tolerance reduced shank, medium length thread, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4312:2006 |
| DIN EN 4313-2006 | 航空系列.铝合金AL-P6013-T6.片和带.0,5 mm ≤ a ≤ 6 mm | Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip - 0,5 mm a 6 mm; German and English version EN 4313:2005 |
| DIN EN 4324-2003 | 航空航天系列.铝合金AL-W42201.焊接填充金属.焊条 | Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod; German and English version EN 4324:2001 |
| DIN EN 4341-2002 | 航空航天系列.铝合金 AL-W46431.焊接填充金属:线材和棒材; 德文版本 EN 4341:2001 | Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod; German version EN 4341:2001 |
| DIN EN 4401-2006 | 航空航天系列.紧公差TI-P64001铝制有色覆层的米制钛合金杆沉头、凹头锁紧螺栓.分类:1100 MPa / 315 °C（周 | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature) / 315 °C; German and English version EN 4401:2006 |
| DIN EN 4402-2007 | 航空航天系列.米制有铝色涂层钛合金TI-P64001紧公差剪切式100°埋头标准钉锁紧螺栓.等级:1100 MPa (常温)/3 | Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4402:2006 |
| DIN EN 4449-2006 | 航空航天系列.铝合金AL-P7050-T76.薄板材.0.8mm≥a ≥6mm | Aerospace series - Aluminium alloy AL-P7050-T76 - Sheet - 0,8 mm a 6 mm; German and English version EN 4449:2005 |
| DIN EN 4450-2006 | 航空航天系列.铝合金AL-P7050-T762.带材.薄板材0.8mm≥a≥6mm | Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm a 6 mm; German and English version EN 4450:2005 |
| DIN EN 4495-2007 | 航空和航天系列.钝化铝合金涂层阳极电镀钛合金短螺纹紧配合标准柄正十二头螺栓.等级:1100MPa(室温下)/315℃ | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4495:2006 |
| DIN EN 4496 Berichtigung 1-2007 | 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中短螺纹紧公差标准螺杆的100°标准沉头偏置十字凹槽螺钉. | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005, Corrigenda to DIN EN 4496:2006-08; German and English version EN 4496:2005/AC:2006 |
| DIN EN 4496-2006 | 航空航天系列.十字凹槽、紧公差标准杆、短螺纹、100标准埋头钛合金阳极铝覆层螺钉.分类:1100 MPa(环境温度) | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005 |
| DIN EN 4497-2007 | 带铝有色涂层阳极电镀钛合金短螺纹紧公差标称柄偏位十字凹槽平头螺钉.分类:1100MPa(室温)/315℃ | Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005 |
| DIN EN 4498-2007 | 用有色热镀铝法钝化镍合金耐热中长螺纹紧公差标称柄大十二头螺栓.分类:1550MPa(室温)/315℃ | Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating, Classification: 1 550 MPa (at ambient temperature)/315 °C; German and English version EN 4498:2005 |
| DIN EN 4501-2007 | 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中短螺纹紧公差标准柄正六角头螺栓、米制系列.等级:1100MPa | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4501:2006 |
| DIN EN 4509-2007 | 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中螺纹延伸到螺头100°沉头偏置十字凹槽螺钉、米制系列.等 | Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4509:2006 |
| DIN EN 485-1-2008 | 铝和铝合金.薄板材、带材和厚板材.第1部分:检验和交货技术条件 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 485-1:2008-06 |
| DIN EN 485-2 Bb.1-1996 | 铝和铝合金.带材、薄板和板材.第2部分:机械性能.回火牌号比较 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; comparision of temper designations |
| DIN EN 485-2-2009 | 铝和铝合金.薄板材、带材和厚板材.第2部分:机械特性 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties; German version EN 485-2:2008 |
| DIN EN 485-3-2003 | 铝和铝合金.带材、薄板和板材.第3部分:热轧制品的尺寸和外形公差 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products; German version EN 485-3:2003 |
| DIN EN 485-4-1994 | 铝和铝合金.带材、薄板、板材.第3部分:冷轧制品尺寸形状公差 | Aluminium and aluminium alloys; sheet, strip and plate; part 4: tolerances on shape and dimensions for cold-rolled products; German version EN 485-4:1993 |
| DIN EN 486-1994 | 铝和铝合金.挤压铸锭.规范 | Aluminium and aluminium alloys; extrusion ingots; specifications; German version EN 486:1993 |
| DIN EN 487-1994 | 铝和铝合金.轧锭.规范 | Aluminium and aluminium alloys; rolling ingots; specifications; German version EN 487:1993 |
| DIN EN 50052/A2 Berichtigung 1-2008 | 充气高压开关装置和控制器用铸铝合金外壳.修改件A2 DIN VDE 0670-801(VDE 0670 Teil 801)-1987.技术勘误DIN | Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear - Amendment A2 to DIN VDE 0670-801 (VDE 0670-801):1987-04 - German version EN 50052:1986/A2:1993, Corrigendum to DIN EN 50052/A2 (VDE 0670-801/A2):1995-10; German version CENELEC-Cor. :2007 to EN 50052:1986/A2:1993 |
| DIN EN 50052/A2-1995 | 充气高压开关设备和控制装置用铸铝合金外壳: DIN VDE 0670-801 (VDE 0670 Teil 801) 修改件 A2; 德文版本 E | Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear; Amendment A2 to DIN VDE 0670-801 (VDE 0670 Teil 801):1987-04; German version EN 50052:1986/A2:1993 |
| DIN EN 50064/A1 Berichtigung 1-2008 | 充气高压开关装置和控制器用锻造铝和铝合金外壳.修改件A1 DIN VDE 0670-803(VDE 0670-803)-1991.技术勘误DI | Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear - Amendment A1 to DIN VDE 0670-803 (VDE 0670-803):1991-05; German version EN 50064:1989/A1:1993, Corrigendum to DIN EN 50064/A1 (VDE 0670-803/A1):1995-10; German version CENELEC-Cor.: 2007 to EN 50064:1989/A1:1993 |
| DIN EN 50064/A1-1995 | 充气高压开关设备和控制装置用精锻铝和铝合金外壳; DIN VDE 0670-803 (VDE 0670 Teil 803) 修改件 A1; 德文 | Wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear; Amendment A1 to DIN VDE 0670-803 (VDE 0670 Teil 803):1991-05; German version EN 50064:1989/A1:1993 |
| DIN EN 50069 Berichtigung 1-2008 | 电压＞1kV用交流开关装置和控制装置.充气高压开关装置和控制装置用铸铝和锻铝合金的焊接复合物外壳.技术勘 | A.c. switchgear and controlgear for voltages above 1 kV - Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear; German version EN 50069:1991, Corrigendum to DIN EN 50069 (VDE 0670-805):1993-08; German version CENELEC-Cor.: 2007 to EN 50069:1991 |
| DIN EN 50069-1993 | 大于1 kV 的交流开关设备和控制装置.充气高压开关设备和控制装置用铸铝和精锻铝合金焊接复合物外壳; 德文版 | A.c. switchgear and controlgear for voltages above 1 kV; welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear; German version EN 50069:1991 |
| DIN EN 50069/A1-1995 | 充气高压开关设备和控制装置用铸铝合金和精锻铝合金焊接复合物外壳; 修改件 A1; 德文版本 EN 50069:1991/A1 | Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear; Amendment A1; German version EN 50069:1991/A1:1993 |
| DIN EN 50183-2000 | 架空线用导线.铝镁硅合金线 | Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires; German version EN 50183:2000 |
| DIN EN 507-2000 | 金属薄板屋顶制品.全支撑铝薄板屋顶制品规范 | Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet; German version EN 507:1999 |
| DIN EN 508-1-2000 | 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第1部分:钢 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel; German version EN 508-1:2000 |
| DIN EN 508-2-2000 | 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第2部分:铝 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium; German version EN 508-2:2000 |
| DIN EN 508-3-2000 | 金属薄板屋面制品.钢、铝或不锈钢薄板制半支撑屋面制品规范.第3部分:不锈钢 | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel; German version EN 508-3:2000 |
| DIN EN 515-1993 | 铝和铝合金.锻制品.回火状态标识符号 | Aluminium and aluminium alloys; wrought products; temper designations; German version EN 515:1993 |
| DIN EN 541-2007 | 铝和铝合金.轧制罐、塞子和盖子.规范 | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications; English version of DIN EN 541:2007-03 |
| DIN EN 546-1-2007 | 铝和铝合金.箔.第1部分:交货技术条件 | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 546-1:2007-03 |
| DIN EN 546-2-2007 | 铝和铝合金.箔.第2部分:机械性能 | Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties; English version of DIN EN 546-2:2007-03 |
| DIN EN 546-3-2007 | 铝和铝合金.箔.第3部分:尺寸公差 | Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions; English version of DIN EN 546-3:2007-03 |
| DIN EN 546-4-2007 | 铝和铝合金.箔.第4部分:特殊性能要求 | Aluminium and aluminium alloys - Foil - Part 4: Special property requirements; English version of DIN EN 546-4:2007-03 |
| DIN EN 570-2007 | 铝和铝合金.由锻制品获得冷挤压金属块.规范 | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification; English version of DIN EN 570:2007-04 |
| DIN EN 573-1-2005 | 铝和铝合金.锻造产品的化学成分和形状.第1部分:编号标识系统 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system; German version EN 573-1:2004 |
| DIN EN 573-2-1994 | 铝和铝合金.精锻制品的化学成分和形式.第2部分:基于标识系统的化学符号; 德文版本 EN 573-2:1994 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based on designation system; German version EN 573-2:1994 |
| DIN EN 573-3-2007 | 铝和铝合金.锻制产品的化学成分和外形.第3部分:产品的化学成分和外形 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; English version of DIN EN 573-3:2007-11 |
| DIN EN 573-5-2007 | 铝和铝合金.锻制品的化学成分和形状.第5部分:标准锻制品汇编 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products; English version of DIN EN 573-5:2007-11 |
| DIN EN 575-1995 | 铝和铝合金.通过熔炼生产的母合金.规范; 德文版本 EN 575:1995 | Aluminium and aluminium alloys - Master alloys produced by melting - Specifications; German version EN 575:1995 |
| DIN EN 576-2004 | 铝和铝合金.再熔用非合金铝锭.规范 | Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications; German version EN 576:2003 |
| DIN EN 577-1995 | 铝和铝合金.液态金属.规范; 德文版本 EN 577:1995 | Aluminium and aluminium alloys - Liquid metal - Specifications; German version EN 577:1995 |
| DIN EN 586-1-1997 | 铝和铝合金.锻件.第1部分:交货技术要求 | Aluminium and aluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery; German version EN 586-1:1997 |
| DIN EN 586-2-1994 | 铝和铝合金.锻件.第2部分:机械性能和补充性能要求; 德文版本 EN 586-2:1994 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements; German version EN 586-2:1994 |
| DIN EN 586-3-2002 | 铝和铝合金.锻件.第3部分:尺寸和形状公差 | Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form; German version EN 586-3:2001 |
| DIN EN 601-2004 | 铝和铝合金.铸件.与食品接触的铸件的化学成分 | Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff; German version EN 601:2004 |
| DIN EN 602-2004 | 铝和铝合金.锻件.与食品接触的物品制造用半成品的化学成分 | Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff; German version EN 602:2004 |
| DIN EN 603-1-1996 | 铝和铝合金.挤压锻坯料.第1部分:验收和交货技术条件 | Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery; German version EN 603-1:1996 |
| DIN EN 603-2-1996 | 铝和铝合金.锻造加工坯料.第2部分:机械性能 | Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties; German version EN 603-2:1996 |
| DIN EN 603-3-2000 | 铝和铝合金.锻造坯料.第3部分:尺寸和形状公差 | Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form; German version EN 603-3:2000 |
| DIN EN 60317-0-3-2009 | 特种绕组线用规范.第0-3部分:一般要求.漆包圆铝线 | Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire (IEC 60317-0-3:2008); German version EN 60317-0-3:2008 |
| DIN EN 60317-14-1995 | 特定型号绕组线的规范.第14部分:聚乙烯醇漆绝缘的圆铝线,105级 | Specifications for particular types of winding wires - Part 14: Polyvinyl acetal enamelled round aluminium wire, class 105 (IEC 60317-14:1990); German version EN 60317-14:1994 |
| DIN EN 60317-15-2005 | 特种绕组线规范.第15部分:180级聚酯酰亚胺漆包圆铝线 | Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 (IEC 60317-15:2004); German version EN 60317-15:2004 |
| DIN EN 60317-25-1997 | 特定型号绕组线的规范.第25部分:聚酰胺-酰亚胺酯涂层的聚亚酰胺酯漆包圆铝线,200级 | Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 (IEC 60317-25:1990); German version EN 60317-25:1996 |
| DIN EN 60317-25/A1-1997 | 特种绕组线规范.第25部分:涂覆聚酰胺-酰亚胺酯的聚亚酰胺酯漆包圆铝绕组线,200级.修改件A1 | Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200; Amentment A1 (IEC 60317-25:1990/A1:1997); German version EN 60317-25/A1:1997 |
| DIN EN 60384-18-2-2007 | 电子设备用固定电容器.第18-2部分:空白详细规范:采用非固体电解质的固定铝电解的表面安装电容器.评定等级EZ | Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ (IEC 60384-18-2:2007); German version EN 60384-18-2:2007 |
| DIN EN 60384-18-2007 | 电子设备用固定电容器.第18部分:分规范:采用固体二氧化锰和非固体电解质的固定铝电解的表面安装电容器 | Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<(Index)2>) and non-solid electrolyte (IEC 60384-18:2007); German version EN 60384-18:2007 |
| DIN EN 60384-25-1-2007 | 电子设备用固定电容器.第25-1部分:空白详细规范.带传导聚合固体电解质的表面安装固定铝电解电容器.评定级EZ | Fixed capacitors for use in electronic equipment - Part 25-1: Blank detail specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC 60384-25-1:2006); German version EN 60384-25-1:2006 |
| DIN EN 60384-25-2007 | 电子设备用固定电容器.第25部分:分规范.带传导聚合固体电解质的表面安装固定铝电解电容器 | Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-25:2006); German version EN 60384-25:2006 |
| DIN EN 60384-4-1-2007 | 电子设备用固定电容器.第4-1部分:空白详细规范.带非固体电解液的固定铝电解电容器.评定等级EZ | Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ (IEC 60384-4-1:2007); German version EN 60384-4-1:2007 |
| DIN EN 60384-4-2-2007 | 电子设备用固定电容器.第4-2部分:空白详细规范:采用固体二氧化锰电解质的固定铝电解电容器.评定等级EZ | Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO<(Index)2>) electrolyte - Assessment level EZ (IEC 60384-4-2:2007); German version EN 60384-4-2:2007 |
| DIN EN 60384-4-2007 | 电子设备用固定电容器.第4部分:分规范:采用固体(二氧化锰)和非固体电解质的铝电解电容器 | Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte (IEC 60384-4:2007); German version EN 60384-4:2007 |
| DIN EN 604-1-1997 | 铝和铝合金.铸锻毛坯.第1部分:交货技术条件 | Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and delivery; German version EN 604-1:1997 |
| DIN EN 604-2-1997 | 铝和铝合金.铸锻毛坯.第2部分:尺寸和形状公差 | Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form; German version EN 604-2:1997 |
| DIN EN 60889-1997 | 架空导线用冷拔铝丝 | Hard-drawn aluminium wire for overhead line conductors (IEC 60889:1987); German version EN 60889:1997 |
| DIN EN 61232-2001 | 电气设备用包铝钢丝 | Aluminium-clad steel wires for electrical purposes (IEC 61232:1993, modified); German version EN 61232:1995 + A11:2000 |
| DIN EN 683-1-2007 | 铝和铝合金.散热片坯料.第1部分:检验和交货技术条件 | Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 683-1:2007-03 |
| DIN EN 683-2-2007 | 铝和铝合金.热交换器坯料.第2部分:机械性能 | Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties; English version of DIN EN 683-2:2007-03 |
| DIN EN 683-3-2007 | 铝和铝合金.热交换器坯料.第3部分:公差、尺寸和形状 | Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form; English version of DIN EN 683-3:2007-03 |
| DIN EN 725-1-2008 | 高级工业陶瓷.陶瓷粉末试验方法.第1部分:氧化铝中杂质的测定 | Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina; English version of DIN EN 725-1:2008-06 |
| DIN EN 725-4-2006 | 高技术陶瓷.陶瓷粉末的检验方法.第4部分:采用 X 射线荧光分析法对铝氮粉末中氧含量的测定 | Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis; English version of DIN EN 725-4:2006-07 |
| DIN EN 754-1-2008 | 铝和铝合金.冷拉杆材/棒材和管材.第1部分:检验和交货技术条件 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 754-1:2008-06 |
| DIN EN 754-2-2008 | 铝和铝合金.冷拉杆材/棒材和管材.第2部分:机械性能 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties; English version of DIN EN 754-2:2008-06 |
| DIN EN 754-3-2008 | 铝及铝合金.冷拉杆材/棒材和管材.第3部分:圆棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form; English version of DIN EN 754-3:2008-06 |
| DIN EN 754-4-2008 | 铝和铝合金.冷拉杆材/棒材和管材.第4部分:方形钢的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form; English version of DIN EN 754-4:2008-06 |
| DIN EN 754-5-2008 | 铝和铝合金.冷拉杆材/棒材和管材.第5部分:矩形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form; English version of DIN EN 754-5:2008-06 |
| DIN EN 754-6-2008 | 铝和铝合金.冷拉杆材/棒材和管材.第6部分:六角形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form; English version of DIN EN 754-6:2008-06 |
| DIN EN 754-7-2008 | 铝和铝合金.冷拉杆材/棒材和管材.第7部分:无缝管的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form; English version of DIN EN 754-7:2008-06 |
| DIN EN 754-8-2008 | 铝和铝合金.冷拉杆材/棒材和管材.第8部分:带孔管材的尺寸和形状公差 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form; English version of DIN EN 754-8:2008-06 |
| DIN EN 755-1-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第1部分:检验和交货技术条件 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery; English version of DIN EN 755-1:2008-06 |
| DIN EN 755-2 Berichtigung 1-2009 | 铝和铝合金.挤压杆材/棒材、管材和型材.第2部分:机械性能.技术勘误DIN EN 755-2-2008-06 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties; German version EN 755-2:2008, Corrigendum to DIN EN 755-2:2008-06 |
| DIN EN 755-2-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第2部分:机械性能 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties; English version of DIN EN 755-2:2008-06 |
| DIN EN 755-3-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第3部分:圆棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form; English version of DIN EN 755-3:2008-06 |
| DIN EN 755-4-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第4部分:方形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form; English version of DIN EN 755-4:2008-06 |
| DIN EN 755-5-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第5部分:矩形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form; English version of DIN EN 755-5:2008-06 |
| DIN EN 755-6-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第6部分:六角形棒材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form; English version of DIN EN 755-6:2008-06 |
| DIN EN 755-7-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第7部分:无缝管的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form; English version of DIN EN 755-7:2008-06 |
| DIN EN 755-8 Berichtigung 1-2009 | 铝和铝合金.挤压棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差.技术勘误DIN EN 755-8-2008 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form; German version EN 755-8:2008, Corrigendum to DIN EN 755-8:2008-06 |
| DIN EN 755-8-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第8部分:带孔管材的尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form; English version of DIN EN 755-8:2008-06 |
| DIN EN 755-9 Berichtigung 1-2009 | 铝和铝合金.挤压杆材/棒材、管材和型材.技术勘误DIN EN 755-9-2008-06 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form; German version EN 755-9:2008, Corrigendum to DIN EN 755-9:2008-06 |
| DIN EN 755-9-2008 | 铝和铝合金.挤压杆材/棒材、管材和型材.第9部分:轮廓、尺寸和形状公差 | Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form; English version of DIN EN 755-9:2008-06 |
| DIN EN 851-1995 | 铝和铝合金.厨房器具生产用圆片和圆片坯料.规范; 德文版本 EN 851:1995 | Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications; German version EN 851:1995 |
| DIN EN 878-2004 | 人类生活用水处理用化学试剂.硫酸铝 | Chemicals used for treatment of water intended for human consumption - Aluminium sulfate; German version EN 878:2004 |
| DIN EN 881-2005 | 人类生活用水处理用化学试剂.氯化铝(单体)、羟基氯化铝(单体)、硫酸盐羟基氯化铝(单体) | Chemicals used for treatment of water intended for human consumption - Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric); German version EN 881:2004 |
| DIN EN 882-2005 | 人类生活用水处理用化学试剂.铝酸钠 | Chemicals used for treatment of water intended for human consumption - Sodium aluminate; German version EN 882:2004 |
| DIN EN 883-2005 | 人类生活用水处理用化学试剂.羟基氯化聚铝和硫酸盐羟基氯化聚铝 | Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxyde and polyaluminium chloride hydroxyde sulfate; German version EN 883:2004 |
| DIN EN 885-2005 | 人类生活用水处理用化学试剂.硅酸盐羟基氯化聚铝 | Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate; German version EN 885:2004 |
| DIN EN 886-2005 | 人类生活用水处理用化学试剂.硫酸硅酸盐羟基聚铝 | Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate; German version EN 886:2004 |
| DIN EN 887-2005 | 人类生活用水处理用化学制剂.硫酸铝铁(Ⅲ) | Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) sulfate; German version EN 887:2004 |
| DIN EN 935-2005 | 人类生活用水处理用化学制剂.氯化铝铁(Ⅲ)(单体)和羟基氯化铝铁(Ⅲ)(单体) | Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric); German version EN 935:2004 |
| DIN EN 941-1995 | 铝和铝合金.一般用途的圆片和圆片坯料.规范; 德文版本 EN 941:1995 | Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications; German version EN 941:1995 |
| DIN EN ISO 10042-2006 | 焊接.铝和铝合金的弧焊接头.缺陷质量分级 (ISO 10042-2005).德文版本 EN ISO 10042-2005 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2005); English version of DIN EN ISO 10042:2006-02 |
| DIN EN ISO 10081-1-2005 | 致密成型耐火产品的分类.第1部分:硅酸铝 | Classification of dense shaped refractory products - Part 1: Alumina-silica (ISO 10081-1:2003); German version EN ISO 10081-1:2005 |
| DIN EN ISO 105-X01-1995 | 纺织品.色牢度试验.第X01部分:耐碳化色牢度.氯化铝 | Textiles - Tests for colour fastness - Part X01: Colour fastness to carbonizing: Aluminium chloride (ISO 105-X01:1993); German version EN ISO 105-X01:1995 |
| DIN EN ISO 11126-10-2005 | 涂装油漆和有关产品前钢材预处理.非金属喷砂清理磨料的规范.第10部分:铁铝石榴石 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000); German version EN ISO 11126-10:2004 |
| DIN EN ISO 11126-7-1999 | 涂装油漆和相关产品前钢基体的预处理. 非金属喷射清理磨料规范.第7部分:熔融氧化铝 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995); German version EN ISO 11126-7:1999 |
| DIN EN ISO 11846-2008 | 金属和合金的腐蚀.可溶解热处理的铝合金抗颗粒间腐蚀的测定 | Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995); German version EN ISO 11846:2008 |
| DIN EN ISO 12020-2000 | 水的质量.铝的测定.原子吸收光谱法 | Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997); German version EN ISO 12020:2000 |
| DIN EN ISO 12215-3-2002 | 小型船舶.船体结构和船材尺寸.第3部分:材料:钢、铝合金、木材及其它材料 (ISO 12215-3:2002); 德文版本 EN | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002); German version EN ISO 12215-3:2002 |
| DIN EN ISO 13805-2009 | 铝用釉瓷和搪瓷.在电解液作用下测定铝上瓷层附着力(剥落试验) | Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (ISO 13805:1999); German version EN ISO 13805:2009 |
| DIN EN ISO 13919-2-2001 | 焊接.电子和激光束焊接接头.质量缺陷等级导则.第1部分:铝及可焊铝合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001); German version EN ISO 13919-2:2001 |
| DIN EN ISO 14713-1999 | 铁和钢结构件的防腐.锌和铝涂层.指南 | Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines (ISO 14713:1999); German version EN ISO 14713:1999 |
| DIN EN ISO 15329-2008 | 金属和合金的腐蚀.热处理铝合金的粒间腐蚀敏感性评价用阳极试验 | Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys (ISO 15329:2006); German version EN ISO 15329:2008 |
| DIN EN ISO 15546-2007 | 石油和天然气工业.铝合金钻杆 | Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2007); English version EN ISO 15546:2007 |
| DIN EN ISO 15547-2-2006 | 石油、石化和天然气工业.板式热交换器.第2部分:铜焊铝板热交换器(ISO 15547-2-2005).英文版本 EN ISO 15547 | Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers (ISO 15547-2:2005); English version EN ISO 15547-2:2005 |
| DIN EN ISO 15614-2-2005 | 金属材料焊接程序的规范和鉴定.焊接程序试验.第2部分:铝及其合金的弧焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005); German version EN ISO 15614-2:2005 |
| DIN EN ISO 15614-4 Berichtigung 1-2008 | 金属材料焊接程序的规范和鉴定.焊接程序试验.第4部分:铝铸件的精工焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005); German version EN ISO 15614-4:2005, Corrigenda to DIN EN ISO 15614-4:2005-09; German version EN ISO 15614-4:2005/AC:2007 |
| DIN EN ISO 15614-4-2005 | 金属材料焊接程序的规范和鉴定.焊接程序试验.第4部分:铝铸件的精焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO 15614-4:2005); German version EN ISO 15614-4:2005 |
| DIN EN ISO 18273-2004 | 焊接消耗品.铝和铝合金焊接用焊丝电极、焊丝和焊棒.分类 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2004); German version EN ISO 18273:2004 |
| DIN EN ISO 18594-2007 | 点焊、凸焊和缝焊电阻.铝材和钢材上测定过渡电阻的方法 | Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material (ISO 18594:2007); English version of DIN EN ISO 18594:2007-06 |
| DIN EN ISO 18595-2007 | 电阻焊接.铝和铝合金的点焊.可焊性、焊接和测试 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing (ISO 18595:2007); English version of DIN EN ISO 18595:2007-12 |
| DIN EN ISO 2063-2005 | 热喷涂.金属和其他无机涂层.锌、铝及其合金 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005); German version EN ISO 2063:2005 |
| DIN EN ISO 21079-1-2008 | 含有氧化铝、氧化锆和硅石的耐火材料的化学分析.含有5%～45%ZrO2的耐火材料(可选择X射线荧光法).第1部分:仪 | Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution (ISO 21079-1:2008); German version EN ISO 21079-1:2008 |
| DIN EN ISO 21079-2-2008 | 含有氧化铝、氧化锆和硅石的耐火材料的化学分析.含有5%～45% ZrO2的耐火材料(可选择X射线荧光法).第2部分: | Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 21079-2:2008); German version EN ISO 21079-2:2008 |
| DIN EN ISO 21079-3-2008 | 包含氧化铝、氧化锆和硅石耐火材料的化学分析.包含5%～45%的ZrO<(指数)2>耐火材料(可选择X射线荧光法).第3 | Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES) (ISO 21079-3:2008); German version EN ISO 21079-3:2008 |
| DIN EN ISO 21587-1-2007 | 硅酸铝耐熔制品的化学分析(可选择X射线荧光法).第1部分:仪器、试剂、硅石的分解和重量测定 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and gravimetric silica (ISO 21587-1:2007); English version of DIN EN ISO 21587-1:2007-12 |
| DIN EN ISO 21587-2-2007 | 硅酸铝耐熔制品的化学分析(可选择X射线荧光法).第2部分:湿化学分析 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 21587-2:2007); English version of DIN EN ISO 21587-2:2007-12 |
| DIN EN ISO 21587-3-2007 | 硅酸铝耐熔制品的化学分析(可选择X射线荧光法).第3部分:感应耦合等离子体和原子吸收光谱测定法 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods (ISO 21587-3:2007); English version of DIN EN ISO 21587-3:2007-12 |
| DIN EN ISO 3262-16-2000 | 涂料用填充剂.规范和试验方法.第16部分:氢氧化铝 | Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000); German version EN ISO 3262-16:2000 |
| DIN EN ISO 3262-18-2000 | 涂料用填充剂.规范和试验方法.第18部分:沉淀硅铝酸钠 | Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000); German version EN ISO 3262-18:2000 |
| DIN EN ISO 3613-2002 | 锌、镉、铝锌合金和锌铝合金的铬酸盐转化镀层.试验方法 | Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000); German version EN ISO 3613:2001 |
| DIN EN ISO 4623-2 Berichtigung 1-2006 | 涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底(ISO 4623-2:2003).勘误到DIN EN ISO 4623-2:2004:06 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2003); German version EN ISO 4623-2:2004, Corregenda to DIN EN ISO 4623-2:2004:06; German version EN ISO 4623-2:2004/AC:2006 |
| DIN EN ISO 4623-2-2004 | 涂料和清漆.耐丝状腐蚀性的测定.第2部分:铝衬底 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2003); German version EN ISO 4623-2:2004 |
| DIN EN ISO 8362-3-2003 | 注射容器及附件.第3部分:注射瓶铝盖 | Injection containers for injectables and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001); German version EN ISO 8362-3:2003; German and English texts |
| DIN EN ISO 8872-2003 | 输血、输液及注射瓶的铝盖.一般要求和试验方法 | Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods (ISO 8872:2003); German version EN ISO 8872:2003, German and english texts |
| DIN EN ISO 9606-2-2005 | 焊工的认可试验.熔焊.第2部分:铝和铝合金 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004); German version EN ISO 9606-2:2004 |
| DIN EN ISO 9692-3-2001 | 焊接和相关工艺.焊缝准备推荐标准.第3部分:铝和铝合金的金属极惰性气体保护焊和钨极惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding und tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2001); German version EN ISO 9692-3:2001 |
| DIN IEC 60384-4-2-1991 | 电子设备固定电容器.第4部分:分规范:固体或非固体电解质铝电解电容器.第2节:空白详细规范:固体电解质铝电解 | Fixed capacitors for use in electronic equipment; blank detail specification: aluminium electrolytic capacitors with solid electrolyte, assessment level E; identical with IEC 60384-4-2:1985 |
| DIN ISO 10566-1999 | 水质.铝的测定.用邻苯二酚紫的光谱测定法 | Water quality - Determination of aluminium - Spectrometric method using pyrocatechol violett |
| DIN ISO 10985-2001 | 输液瓶和注射液瓶用铝塑合成材料帽盖.要求和试验方法 | Caps made of aluminium-plastics combinations for infusion bottles and injection vials - Requirements and test methods (ISO 10985:1999) |
| DIN ISO 12980-2006 | 铝生产用碳素材料.电极用生焦和煅烧焦.X射线荧光分析法(ISO 12980-2000) | Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method (ISO 12980:2000) English version of DIN ISO 12980:2006-05 |
| DIN ISO 5832-11-2001 | 外科植入物.金属材料.第11部分:锻制6钛/7铝/铌合金 | Implants for surgery - Metallic materials - Part 11: Wrought titanium-6-aluminium 7-niobium alloy (ISO 5832-11:1994) |
| DIN ISO 5832-3-2000 | 外科植入物.金属材料.第3部分:钛6-铝4-钒锻造合金 | Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:1996) |
| DIN ISO 6474-2001 | 外科植入物.基于高纯度铝的陶瓷材料 | Implants for surgery - Ceramic materials based on high purity alumina (ISO 6474:1994) |
| DIN ISO 8362-6-1993 | 注射剂用注射容器及附件.铝塑组合注射瓶盖 | Injection containers for injectables and accessories; caps made of aluminium-plastics combinations for injection vials; identical with ISO 8362-6:1992 |
| DIN ISO 8362-7-2007 | 注射容器及附件.第7部分:无重叠塑料部件由铝和塑料混合物制造的注射瓶盖 | Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)；English version of DIN ISO 8362-7:2007-06 |
| DIN ISO 8536-3-2001 | 医用输液设备.第3部分:输液瓶铝帽 | Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:1999) |
| DIN ISO 8536-7-2001 | 医用输液设备.第7部分:小输液瓶用铝塑合成材料制帽盖 | Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles (ISO 8536-7:1999) |
| DIN ISO 9285-1998 | 磨料粒度.电熔氧化铝的化学分析 | Abrasive grains and crude - Chemical analysis of fused aluminium oxide (ISO 9285:1997) |
| DIN V 11535-2-1994 | 温室.1280米宽纵向网格尺寸3065米长的钢和铝结构 | Greenhouses; steel and aluminium construction 12,80 m in width with a longitudinal grid dimension of 3,065 m |
| DIN V 4113-3 Berichtigung 1-2008 | 承受主要静负荷的铝结构.施工人员的职能履行和资格鉴定.技术勘误DIN V 4113-3-2003 | Aluminium constructions under predominantly static loading - Execution and qualification of constructors, Corrigenda to DIN V 4113-3:2003-11 |
| DIN V EN 2345-1985 | 航空航天系列.铝及铝合金铆钉.技术规范 | Aerospace series; aluminium and aluminium alloy rivets; technical specification |
| DIN V ENV 14226-2002 | 高技术陶瓷.陶瓷粉末试验方法.使用火焰原子吸收光谱法(FAAS)或感应耦合等离子原子发射光谱法(ICP-AES)对硅 | Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES); German version ENV 14226:2002 |
| DIN V ENV 1999-1-1-2000 | 欧洲规范9:铝结构设计.第1-1部分:一般规则.一般规则和建筑物规则 | Eurocode 9: Design of aluminium structures - Part 1-1: General rules; general rules and rules for buildings; German version ENV 1999-1-1:1998 |
| DIN V ENV 1999-2-2001 | 欧洲法规9:铝结构设计.第2部分:易疲劳的结构 | Eurocode 9: Design of aluminium structures - Part 2: Structures susceptible to fatigue; German version ENV 1999-2:1998 |
| DIN VDE 0670-801-1987 | 大于1 kV 的交流开关设备和控制装置.充气高压开关设备和控制装置用铸铝合金外壳; 德文版本 EN 50052, editi | A.c. switchgear and controlgear for voltages above 1 kV; cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear; German version EN 50052, edition 1986 |
| DIN VDE 0670-803-1991 | 大于1 kV 的交流开关设备和控制装置.充气高压开关设备和控制装置用精锻铝和铝合金外壳; 德文版本 EN 50064: | A.c. switchgear and controlgear for voltages above 1 kV; wrought aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear; german version EN 50064:1989 |
| DIN-Fachbericht 76-1999 | 铝电解电容器的应用指南 | Guide for the application of aluminium electrolytic capacitors; German version CENELEC Report 040-001:1998-07 |
| 编号 | 中文名称 | 英文名称 |