欧洲铝标准(EN aluminium standards)

ANSI　|　 BS　|　 DIN　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC
编号 中文名称 英文名称
EN 1011-4-2000 焊接 金属材料焊接的推荐规范 第4部分：铝和铝合金的电弧焊接 Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
EN 10154-2002 连续热浸镀铝硅钢薄板和带材　交货技术条件 Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions
EN 10214-1995 连续热浸镀锌铝薄钢板和钢带　交货技术条件 Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions
EN 10215-1995 连续热浸镀铝锌薄钢板和钢带　交货技术条件 Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions
EN 10244-3-2001 钢丝和钢丝制品　钢丝上的非黑色金属外层　第3部分：铝镀层 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings
EN 1092-4-2002 法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第4部分：铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
EN 12020-1-2001 铝和铝合金　合金EN AW-6060和EN AW-6063的精密压制型材　第1部分：检验与交货技术条件 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery
EN 12020-2-2001 铝和铝合金　合金EN AW-6060和EN AW-6063的精密压制型材　第2部分：尺寸与形状公差 Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form
EN 12258-1-1998 铝和铝合金　术语和定义　第1部分：通用术语 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
EN 12258-3-2003 铝和铝合金　术语和定义　第3部分：废料 Aluminium and aluminium alloys - Terms and definitions - Part 3: Scrap
EN 12373-1-2001 铝和铝合金　阳极氧化　第1部分：铝上装饰和保护阳极氧化膜的测定方法 Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on aluminium
EN 12373-10-1998 铝和铝合金　阳极氧化　第10部分：用磨擦喷射试验机测定阳极氧化膜的平均比耐磨性 Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
EN 12373-11-2000 铝和铝合金　阳极氧化　第11部分：20°、45°、60°或85°角处测量阳极氧化膜在的镜面反射率和镜面光泽度 Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85?国际标准分类号：25.220.20 77.120.10英文标准名称：Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85?
EN 12373-12-2000 铝和铝合金　阳极氧化 第12部分：用积分球仪测量铝表面的反射特性 Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
EN 12373-13-2000 铝和铝合金　阳极氧化 第13部分：用测角光度仪或滤色测角光度仪测量铝表面的反射特性 Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
EN 12373-14-2000 铝和铝合金　阳极氧化 第14部分：阳极氧化膜成象清晰度的目测　座标比例尺法 Aluminium and aluminium alloys - Anodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale method
EN 12373-15-2000 铝和铝合金　阳极氧化 第15部分：阳极氧化膜抗形变破裂性的评定 Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation
EN 12373-16-2001 铝和铝合金　阳极氧化 第16部分：薄阳极氧化膜的连续性检验　硫酸铜试验 Aluminium and aluminium alloys - Anodizing - Part 16: Check of continuity of thin anodic oxdation coatings; Copper sulfate test
EN 12373-17-2001 铝和铝合金　阳极氧化 第17部分：电击穿电压的测定 Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potential
EN 12373-18-2001 铝和铝合金　阳极氧化 第18部分：点蚀评定铝用检定系统　图表法　 Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart method
EN 12373-19-2001 铝和铝合金　阳极氧化 第19部分：点蚀评定铝用检定系统　网格法　 Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation of pitting corrosion; Grid method
EN 12373-2-1998 铝和铝合金　阳极氧化　第2部分：阳极氧化膜单位面积质量（表面密度）的测定　重量分析法 Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
EN 12373-3-1998 铝和铝合金　阳极氧化　第3部分：阳极氧化膜厚度的测定　分束显微镜无损测量 Aluminium and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
EN 12373-4-1998 铝和铝合金　阳极氧化　第4部分：通过事先经酸处理的染斑试验估计封闭后 阳极氧化膜吸收能力的损失　 Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
EN 12373-5-1998 铝和铝合金　阳极氧化　第5部分：用导纳测量法评定封闭阳极氧化膜的质量 Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
EN 12373-6-1998 铝和铝合金　阳极氧化　第6部分：通过测量事发未经酸处理的磷酸/铬酸中浸泡后的质量损失评定封闭阳极氧化膜 Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
EN 12373-7-2002 铝和铝合金　阳极氧化　第7部分：通过测量事发经酸处理的磷酸/铬酸中浸泡后的质量损失评定封闭阳极氧化膜的 Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
EN 12373-8-1998 铝和铝合金　阳极氧化　第8部分：着色阳极氧化膜可比耐紫外光和耐热色牢固度的测定 Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
EN 12373-9-1998 铝和铝合金　阳极氧化　第9部分：用磨擦轮磨损试验机测定阳极氧化膜耐磨性和耐磨系数 Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
EN 12375-1998 包装　软铝管　壁厚测定方法 Packaging - Flexible aluminium tubes - Wall thickness determination method
EN 12392-2000 铝和铝合金　锻制品　压力设备生产用制品的特殊要求 Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment
EN 12441-1-2001 锌和锌合金　化学分析　第1部分：锌合金中铝的测定　滴定法 Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric method
EN 12441-6-2003 锌和锌合金　化学分析　第6部分：用原子吸收光谱法测定铝和铁 Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric method
EN 12475-1-1998 致密成形型耐火制品的分类　第1部分：硅酸铝制品 Classification of dense shaped refractory products - Part 1: Aluminia-silica products
EN 12482-1-1998 铝和铝合金　一般用重轧坯料　第1部分： 热轧重轧坯料规范 Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock
EN 12482-2-1998 铝和铝合金　一般用重轧坯料　第2部分：冷轧重轧坯料规范 Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock
EN 12487-2000 金属的防腐蚀　铝和铝合金上清洗和非清洗的铬酸盐转化镀层 Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
EN 12816-2001 可移动再充式液化石油气（LPG）钢瓶和铝瓶 处理 Transportable refillable steel and aluminium LPG cylinders - Disposal
EN 12862-2000 可运输气瓶 可移动再充式焊接铝合金气瓶的设计和结构规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
EN 1301-1-1997 铝和铝合金 拉制线材 第1部分：检查和交货的技术条件 Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery
EN 1301-2-1997+AC-1998 铝和铝合金 拉制线材 第2部分：机械性能 Aluminium and aluminium alloys - Drawn wire - Part 2: Mechanical properties
EN 1301-3-1997 铝和铝合金 拉制线材 第3部分：尺寸和公差 Aluminium and aluminium alloys - Drawn wire - Part 3: Tolerances on dimensions
EN 1302-1999 民用水处理用化学品 铝基凝结剂 分析方法 Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods
EN 130300-1998 分规范：固体和非固体电解质铝电解质电容器　 Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte
EN 130301-2002 空白详细规范：非固体电解质铝电解质电容器　 Blank detail specification: Aluminium electrolytic capacitors with non-solid electrolyte
EN 13048-2000 包装 挠性铝管 内部漆膜厚度测量法 Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
EN 13110-2002 可移动再充式焊接液化石油气铝瓶 设计和构造 Transportable refillable welded aluminium cylinders for liquefied petroleum gas - Design and construction
EN 13195-1-2002 铝和铝合金 海洋设备（造船、海运和海上设备）用锻造和浇铸产品 Aluminium and aluminium alloys - Wrought and cast products for marine applications (shipbuilding, marine and offshore) - Part 1: Specifications
EN 137000-1995 通用规范：发动机用非固体电解质的铝电解交流固定电容器 Generic specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for use with motors
EN 137100-1995 分规范：发动机起动器用非固体电解质铝电解交流固定电容器　鉴定批准 Sectional specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval
EN 137101-1995 空白详细规范：发动机起动器用非固体电解质铝电解交流固定电容器　鉴定批准 Blank detail specification: Fixed aluminium electrolytic a.c. capacitors with non-solid electrolyte for motor starter applications - Qualification approval
EN 13753-2002 人类生活用水处理用产品 粒状氧化铝 Products used for treatment of water intended for human consumption - Granular activated aluminia
EN 1386-1996 铝和铝合金 梯级金属板 规范 Aluminium and aluminium alloys - Tread plate - Specifications
EN 13920-1-2003 铝和铝合金 废料 第1部分：一般要求、取样和试验 Aluminium and aluminium alloys - Scrap - Part 1: General requirements, sampling and tests
EN 13920-10-2003 铝和铝合金 废料 第10部分：由用过的铝饮料罐组成的废料 Aluminium and aluminium alloys - Scrap - Part 10: Scrap consisting of use aluminium beverage cans
EN 13920-11-2003 铝和铝合金 废料 第11部分：包括铝-铜散热器在内的废料 Aluminium and aluminium alloys - Scrap - Part 11: Scrap consisting of aluminium-copper radiators
EN 13920-12-2003 铝和铝合金 废料 第12部分：由单一合金组成的废料 Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy
EN 13920-13-2003 铝和铝合金 废料 第13部分：由两种或多种合金组成的混合切屑 Aluminium and aluminium alloys - Scrap - Part 13: Mixed turnings consisting of two or more alloys
EN 13920-14-2003 铝和铝合金 废料 第14部分：消费品铝包装生产的废料 Aluminium and aluminium alloys - Scrap - Part 14: Scrap from post-consumer aluminium packagings
EN 13920-15-2003 铝和铝合金 废料 第15部分：消费品铝包装产生的去涂层铝废料 Aluminium and aluminium alloys - Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings
EN 13920-16-2003 铝和铝合金 废料 第16部分：由浮渣、碎屑、铸锭的金属物组成的废料 Aluminium and aluminium alloys - Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics
EN 13920-2-2003 铝和铝合金 废料 第2部分：纯铝废料 Aluminium and aluminium alloys - Scrap - Part 2: Unalloyed aluminium scrap
EN 13920-3-2003 铝和铝合金 废料 第3部分：线头和缆绳 Aluminium and aluminium alloys - Scrap - Part 3: Wire and cable scrap
EN 13920-4-2003 铝和铝合金 废料 第4部分：由单一锻压合金组成的废料 Aluminium and aluminium alloys - Scrap - Part 4: Scrap consisting of one single wrought alloy
EN 13920-5-2003 铝和铝合金 废料 第5部分：由同一系列的两种或多种锻压合金组成的废料 Aluminium and aluminium alloys - Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series
EN 13920-6-2003 铝和铝合金 废料 第6部分：由两种或多种锻压合金组成的废料 Aluminium and aluminium alloys - Scrap - Part 6: Scrap consisting of two or more wrought alloys
EN 13920-7-2003 铝和铝合金 废料 第7部分：由铸锭组成的废料 Aluminium and aluminium alloys - Scrap - Part 7: Scrap consisting of castings
EN 13920-8-2003 铝和铝合金 废料 第8部分：由铝分离工艺必经的切岁程序中产生的非铁质材料组成的废料 Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes
EN 13920-9-2003 铝和铝合金 废料 第9部分：非铁质碎料的铝分离工艺所产生的废料 Aluminium and aluminium alloys - Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials
EN 13957-2003 铝合及铝合金　 一般用途挤压圆形、蛇形管 规范 Aluminium and aluminium alloys - Extruded round, coiled tube for general applications - Specification
EN 13958-2003 铝及铝合金　一般用途冷拉圆形、蛇形管 规范 Aluminium and aluminium alloys - Cold drawn round, coiled tube for general applications - Specification
EN 1396-1996 铝和铝合金 一般用途的盘绕涂层薄板和带材 规范 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 13981-1-2003 铝及铝合金　铁路结构用产品，检验和交货技术条件　第1部分：挤压产品 Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 1: Extruded products
EN 14121-2003 铝及铝合金　电工用铝片、铝带和铝板 Aluminium and aluminium alloys - Aluminium sheet, strip and plate for electrotechnical applications
EN 1559-4-1999 铸造 交货的技术条件 第3部分：铝合金铸件的附加要求 Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings
EN 1592-1-1997 铝和铝合金 HF接缝焊接管 第1部分：检验和交货技术条件 Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery
EN 1592-2-1997 铝和铝合金 HF接缝焊接管 第2部分：机械性能 Aluminium and aluminium alloys - HF seam welded tubes - Part 2: Mechanical properties
EN 1592-3-1997 铝和铝合金 HF接缝焊接管 第3部分：圆形管的尺寸和形状公差 Aluminium and aluminium alloys - HF seam welded tubes - Part 3: Tolerances on dimensions and form for circular tubes
EN 1592-4-1997 铝和铝合金 HF接缝焊接管 第4部分：方形、矩形和异形管的尺寸和形状公差 Aluminium and aluminium alloys - HF seam welded tubes - Part 4: Tolerances on dimensions and form for square, rectangular and shaped tubes
EN 1669-1996 铝及铝合金 试验方法 薄板材和带材的耳子试验 Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip
EN 1676-1996 铝及铝合金 重熔用的合金锭 规范 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
EN 1706-1998 铝及铝合金 铸件 化学成分和机械性能 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
EN 1715-1-1997 铝和铝合金 拉制件 第1部分：检验和交货的一般要求及技术条件 Aluminium and aluminium alloys - Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery
EN 1715-2-1997+AC-1998 铝和铝合金 拉制坯料 第2部分：电气应用的特殊要求 Aluminium and aluminium alloys - Drawing stock - Part 2: Specific requirements for electrical applications
EN 1715-3-1997+AC-1998 铝和铝合金 拉制坯料 第3部分：机械应用的特殊要求(包括焊接) Aluminium and aluminium alloys - Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)
EN 1715-4-1997 铝和铝合金 拉制坯料 第4部分：焊接应用的特殊要求 Aluminium and aluminium alloys - Drawing stock - Part 4: Specific requirements for welding applications
EN 1759-4-2003 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第4部分：铝合金法兰 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
EN 1780-1-2002 铝和铝合金 再熔化母合金和铸件用合金铝铸锭标识 第1部 分：数字标识体系 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system
EN 1780-2-2002 铝和铝合金 再熔化母合金及铸件用合金铝铸锭标识 第2部分：基于化学符号标识体系 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system
EN 1780-3-2002 铝和铝合金 再熔化母合金及铸件用合金铝铸锭标识 第1部分：数字标识体系 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical compositon
EN 1802-2002 可运输气瓶 无缝铝合金气瓶的周期检验和试验 Transportable gas cylinders - Periodic inspection and testing of seamless aluminium alloy gas cylinders
EN 1967-2002 建筑粘合剂 使用与活动滚筒粘合方法有联系的潮湿剥离试验对铝表面处理效用的评估 Structural adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method
EN 1975-1999+AC-1999 可运输气瓶 容量从0,5L到150L(包括150L)可再灌装的无缝铝和铝合金制气瓶的设计和结构规范 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre / Note: To be amended by EN 1975/prA1 (2003-07).
EN 1975/prA1-2003 可运输气瓶 容积从0.5L至150L可再灌装可运输无缝铝和铝合金气体瓶设计和结构规范 修改A1 Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres; Amendment A1 / Note: Intended as an amendment to EN
EN 2004-1-1993 航空航天系列 铝和铝合金产品试验方法 第1部分：锻铝合金电导率的测定 Aerospace series; test methods for aluminium and aluminium alloy products - Part 1: Determination of electrical conductivity of wrought aluminium alloys
EN 2004-5-1993 航空航天系列 铝和铝合金产品试验方法 第5部分：包层半成品的包层厚度和铜扩散的测定 Aerospace series; test methods for aluminium and aluminium alloy products - Part 5: Determination of cladding thickness and copper diffusion of clad semi-finished products
EN 2044-2001 航空航天系列 拉制的圆形铝和铝合金型材 容差h11 直径4mm≤D≤63mm 尺寸 Aerospace series - Round bars, drawn, in aluminium and aluminium alloys - Tolerance class h 11 - Diameter 4 mm ≤ D ≤ 63 mm - Dimensions
EN 2045-2001 航空航天系列 拉制的方形铝和铝合金型材 容差h11 厚度6mm≤a≤50mm 尺寸 Aerospace series - Square bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Thickness 6 mm ≤ a ≤ 50 mm - Dimensions
EN 2046-2001 航空航天系列 拉制的六角形铝和铝合金型材 容差h11 厚度6mm≤a≤50mm 尺寸 Aerospace series - Hexagonal bars, drawn in aluminium and aluminium alloys - Tolerance class h 11 - Width across flats 7 mm ≤ a ≤ 50 mm - Dimensions
EN 2047-2001 航空航天系列 挤压的铝合金珠状L截面 尺寸 Aerospace series - Beaded L-section extruded, in aluminium alloys - Dimensions
EN 2048-2001 航空航天系列 挤压的铝合金L截面 尺寸 Aerospace series - Extruded L-section, in aluminium alloys - Dimensions
EN 2049-2001 航空航天系列 挤压的铝合金槽形材 尺寸 Aerospace series - Extruded channel section, in aluminium alloys - Dimensions
EN 2050-2001 航空航天系列 挤压的铝合金T型材 尺寸 Aerospace series - Extruded T-section, in aluminium alloys - Dimensions
EN 2066-2001 航空航天系列 铝合金挤压型材 一般公差 Aerospace series - Extruded section in aluminium alloys - General tolerances
EN 2070-1-1989+A1-1993 航空航天系列 锻造的铝和铝合金产品 技术法规 第1部分：一般要求 Aerospace series; aluminium and aluminium alloy wrought products; technical specification; part 1: general requirements
EN 2070-2-1989 航空航天系列 锻造的铝和铝合金产品 技术规范 第2部分：薄板、带型材和板材 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 2: Sheet, strip formed profiles and plate
EN 2070-3-1989 航空航天系列 锻造的铝和铝合金产品 技术规范 第3部分：棒材和型材 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 3: Bar and section
EN 2070-4-1989 航空航天系列 锻造的铝和铝合金产品 技术规范 第4部分：结构用管 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specifications - Part 4: Tube for structures
EN 2070-5-1989 航空航天系列 锻造的铝和铝合金产品 技术规范 第5部分：压力下用管 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 5: Tube used under pressure
EN 2070-6-1989 航空航天系列 锻造的铝和铝合金产品 技术规范 第6部分：铆钉用线材 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 6: Rivet wire
EN 2070-7-1989 航空航天系列 锻造的铝和铝合金产品 技术规范 第7部分：锻坯 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 7: Wrought forging stock
EN 2071-2001 航空航天系列 铝和铝合金薄板 厚度0.25mm≤a≤6mm 尺寸 Aerospace series - Sheets in aluminium and aluminium alloys - Thickness 0.25 mm≤ a ≤ 6 mm - Dimensions
EN 2072-1993 航空航天系列 铝AI-P1050AH14 薄板材和带材0.4mm≤a≤6mm Aerospace series - Aluminium Al-P1050A H14; sheet and strip 0.4 ≤ a ≤6 mm
EN 2076-1-1989+A1-1993 航空航天系列 铝和镁合金铸锭和铸件 技术规范 第1部分：一般要求 Aerospace series; aluminium and magnesium alloy ingots and castings; technical specification; part 1: general requirements
EN 2076-2-1989 航空航天系列 铝和镁合金铸锭和铸件 技术规范 第2部分：冶炼用铸锭 Aerospace series - Aluminium and magnesium alloy ingots and castings - Technical specification - Part 2: Ingots for remelting
EN 2076-3-1989 航空航天系列 铝和镁合金铸锭和铸件 技术规范 第3部分：预制件和产品铸件 Aerospace series - Aaluminium and magnesium alloy ingots and castings - Technical specification - Part 3: Pre-production and production castings
EN 2082-1-1989+A1-1993 航空航天系列 铝合金锻坯和锻件 技术规范 第1部分：一般要求 Aerospace series; aluminium alloy forging stock and forgings; technical specification; part 1: general requirements
EN 2082-2-1989 航空航天系列 铝合金锻坯和锻件 技术规范 第2部分：锻坯 Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 2: Forging stock
EN 2082-3-1989 航空航天系列 铝合金锻坯和锻件 技术规范 第3部分：预制件和锻件 Aerospace series - Aluminium alloy forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings
EN 2089-1994 航空航天系列 铝合金AL-P2014A T6或T62 薄板及带材 0.4mm≤a≤6mm Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - sheet and strip - 0.4 mm ≤ a ≤ 6 mm
EN 2092-1993 航空航天系列 铝合金AL-P7050-T6或T62 包层薄板和带材0.4mm≤a≤6mm Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Clad sheet and strip 0.4mm≤ a ≤6 mm
EN 2093-1992 航空航天系列 铝合金AL-P7009-T74 手工锻件20mm≤a≤150mm Aerospace series - Aluminium alloy AL-P7009-T74 - Hand forgins 20 mm ≤ a ≤ 150 mm
EN 2094-1992 航空航天系列 铝合金AL-P7009-T74 模锻件3mm≤a≤150mm Aerospace series - Aluminium alloy AL-P7009-T74 - Die forgins 3 mm ≤ a ≤ 150 mm
EN 2100-1992 航空航天系列 铝合金AL-P2014A-T4511 挤压棒材和型材a或D≤200mm Aerospace series - Aluminium alloy AL-P2014A-T4511 - Extruded bars and sections a or D ≤ 200 mm
EN 2101-1991 航空航天系列 铝合金和锻铝合金铬酸阳极化处理 Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys
EN 2122-1996 航空航天系列 阳极化和铬酸盐处理的扁平铝合金垫圈 Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated
EN 2126-1992 航空航天系列 铝合金AL-P7075-T651 板材 6mm≤a≤80mm Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm ≤ a ≤ 80 mm
EN 2127-1992 航空航天系列 铝合金AL-P7075-T73511 挤压棒材和型材 a或D≤100mm Aerospace series - Aluminium alloy AL-P7075-T73511 - Extrudes bars and sections a or D ≤ 100 mm
EN 2128-1992 航空航天系列 铝合金AL-P7075-T7351 拉制棒材 6mm≤a或D≤75mm Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm ≤ a or D ≤ 75 mm
EN 2131-2001 航空航天系列 铝合金板材 厚度 6mm≤a≤160mm 尺寸 Aerospace series - Plates in aluminium alloys - Thickness 6 mm ≤a ≤ 160 mm - Dimensions
EN 2134-2001 航空航天系列 挤压铝和铝合金圆形型材 直径10mm≤D≤220mm 尺寸 Aerospace series - Round bars, extruded, in aluminium and aluminium alloys - Diameter 10 mm ≤ D ≤ 220 mm - Dimensions
EN 2144-1994 航空航天系列 铝合金2117系列万能分度头型实心铆钉 英制系列 Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, inch based series
EN 2145-1994 航空航天系列 经过阳极氧化或铬酸盐处理的2117号铝合金制万能分度头型实心铆钉 英制系列 Aerospace series - Rivets, solid, universal head, in aluminium alloy 2117, anodized or chromated, inch based series
EN 2149-1996 航空航天系列 经阳极氧化处理或经铬酸盐处理的5056A型铝制万能分度头型实心铆钉 英制系列 Aerospace series - Rivets, solid, universal head, in aluminium alloy 5056A, anodized or chromated, inch based series
EN 22063-1993 金属和其他无机涂覆盖层 热喷镀 锌、铝及其合金 Metallic and other inorganic coatings - Thermal spraying - Zinc, aluminium and their alloys (ISO 2063:1991, modified)
EN 2257-1997 航空航天系列 结构用铝和铝合金环形管 直径为6mm≤D≤100mm.厚度1mm≤a≤6mm.尺寸 Aerospace series - Circular tubes for structures in aluminium and aluminium alloys - Diameter 6 mm D 100 mm - Thickness 1 mm a 6 mm - Dimensions
EN 2258-1997 航空航天系列 流体设备用铝和铝合金环形管 直径为3.2mm≤D≤100mm 厚度0.5mm≤a≤2.5mm.尺寸 Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm ≤ D≤ 100 mm - Thickness 0,6 mm ≤ a 2,5 mm - Dimensions
EN 2284-1991 航空航天系列 铝合金和锻铝合金硫酸阳极化处理 Aerospace series - Sulphuric acid anodizing of aluminium and wrought aluminium alloys
EN 2285-1989 航空航天系列 具有自润滑衬套的纯铝合金轴套 尺寸和负荷 Aerospace series - Bushes, plain aluminium alloy with self-lubricating liner; Dimensions and loads
EN 2286-1989 航空航天系列 具有自润滑衬套的法兰铝合金轴套筒 尺寸和负荷 Aerospace series - Bushes, flanged aluminium alloy with self-lubricating liner; Dimensions and loads
EN 2289-1996 航空航天系列 飞行控制器用铝合金操纵杆 技术规范 Aerospace series - Rod bodies in aluminium alloy for flight controls - Technical specification
EN 2290-1-1998 航空航天系列 可调节终端配件用的铝合金飞行控制器操纵杆 第1部分：尺寸和荷载 Aerospace series - Rod bodies, flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads
EN 2318-1992 航空航天系列 AL-P2024-T3511铝合金 1.2mm≤a或D≤150mm的挤压棒材和型材 Aerospace series; aluminium alloy AL-P2024-T3511; extruded bars and sections 1.2 mm ≤ a or D ≤ 150 mm
EN 2326-1992 航空航天系列 AL-P6082-T6铝合金 D ≤ 200 mm的挤压棒材和型材 Aerospace series - Aluminium alloy AL-P6082-T6; extruded bars and sections a or D ≤ 200 mm
EN 2334-1997 航空航天系列 铝和铝合金铬硫酸洗液 Aerospace series - Chromic-sulphuric acid pickle of aluminium and aluminium alloys
EN 2365-1989 航空航天系列 铝合金轴环 Aerospace series; collars, aluminium alloy
EN 2381-1992 航空航天系列 AL-P7009-T7452铝合金 40 mm≤ a ≤ 150 mm手工锻件 Aerospace series- Aluminium alloy AL-P7009-T7452 - Hand forgings 40 mm ≤ a ≤ 150 mm
EN 2384-1992 航空航天系列 AL-P2014A-T6511铝合金 a或D≤ 150 mm挤压棒材和型材 Aerospace series - Aluminium alloy AL-P2014A-T6511 - Extruded bars and sections a or D ≤ 150 mm
EN 2385-1992 航空航天系列 AL-P7009-T74511铝合金 a或D≤ 125mm挤压棒材和型材 Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm
EN 2395-1994 航空航天系列 AL-P2014A-T4或T42铝合金 0.4 mm ≤ a ≤ 6 mm薄板材和带材 Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Sheet and strip - 0.4 mm ≤ a ≤ 6 mm
EN 2437-2001 航空航天系列 铝和铝合金用铬酸盐转化涂层(黄色) Aerospace series - Chromate conversion coatings (yellow) for aluminium and aluminium alloys
EN 2536-1995 航空航天系列 铝合金的硬阳极氧化处理 Aerospace series - Hard anodizing of aluminium alloys
EN 2599-2001 航空航天系列　铝和铝合金带条　厚度 0.25 mm ≤ a≤ 3.2 mm 　尺寸 Aerospace series - Strips in aluminium and aluminium alloys - Thickness 0.25 mm≤ a ≤ 3.2 mm - Dimensions
EN 2630-1993 航空航天系列　AL-P7009-T74511铝合金有a或D ≤125mm的周围有粗粒控制的挤压棒材和型材 Aerospace series - Aluminium alloy Al-P7009-T74511 - Extruded bars and sections a or D ≤ 125 mm with peripheral coarse grain control
EN 2632-1993 航空航天系列　AL-P7075-T73511铝合金a或D≤100mm的周围有粗粒控制的挤压棒材和型材 Aerospace series - Aluminium alloy Al-P7075-T73511 - Extruded bars and sections a or D ≤ 100 mm with peripheral coarse grain control
EN 2633-1993 航空航天系列　AL-P2024-T3511铝合金a或D≤150mm的周围有粗粒控制的挤压棒材和型材 Aerospace series - Aluminium alloy Al-P2024-T3511 - Extruded bars and sections 1.2 mm ≤ a or D ≤ 150 mm with peripheral coarse grain control
EN 2636-1993 航空航天系列　AL-P6082-T6铝合金铝合金a或D≤200mm的周围有粗粒控制的挤压棒材和型材 Aerospace series - Aluminium alloy Al-P6082-T6 - Extruded bars and sections a or D ≤ 200 mm with peripheral coarse grain control
EN 2693-1993 航空航天系列　AL-P5086-H111铝合金　薄板和带材　 0.3 ≤ a≤6 mm Aerospace series - Aluminium alloy Al-P5086-H111 - Sheet and strip 0.3 ≤ a ≤6 mm
EN 2694-1993 航空航天系列　AL-P6061-T6或T62铝合金　薄板和带材　 0.4 ≤a≤6 mm Aerospace series - Aluminium alloy Al-P6061-T6 or T62 - Sheet and strip 0.4 ≤ a ≤6 mm
EN 2695-1993 航空航天系列　AL-P6081-T6铝合金　薄板和带材 0.3 ≤ a≤ 6 mm Aerospace series - Aluminium alloy Al-P6081-T6 - Sheet and strip 0.3 ≤ a ≤6 mm
EN 2696-1993 航空航天系列　AL-P7075-T6或T62铝合金　薄板和带材 0.4 ≤ a≤ 6 mm Aerospace series - Aluminium alloy Al-P7075-T6 or T62 - Sheet and strip 0.4≤ a ≤6 mm
EN 286-4-1994 装空气或氮气的简单不着火的压力容器 第4部分：铁路运输车辆气动刹车设备和辅助气动设备用的铝合金压力容 Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock
EN 287-2-1992+A1-1997 焊机的合格性测试 熔焊 第2部分：铝和铝合金 Approval testing of welders; fusion welding; part 2: aluminium and aluminium alloys
EN 288-4-1992+A1-1997 金属材料焊接程序规范和鉴定 第4部分：铝及其合金的电弧焊焊接程序试验 Specification and approval of welding procedures for metallic materials; part 4: welding procedure tests for the arc welding of aluminium and its alloys
EN 2912-1996 航空航天系列　阳极氧化或铬酸盐处理铝合金制大直径平垫圈 Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated
EN 29658-1991 钢 铝含量的测定 火焰原子吸收光谱法 Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658:1990)
EN 30042-1994 铝和铝焊合金弧焊接头 缺陷质量分级指南 Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections (ISO 10042:1992)
EN 3665-1997 航空航天系列　色漆和清漆的检验方法　铝合金耐线状腐蚀的检验 Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys
EN 3730-2001 航空航天系列　具有橡胶缓冲的铝合金鞍壮固定和滑动型夹箍　尺寸质量 Aerospace series - Clamps, saddle fixed and sliding version in aluminium alloy with rubber cushioning - Dimensions, masses
EN 3869-2003 航空航天系列　管连接　松套法兰和密封垫　碳氟橡胶垫和铝合金附件 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy / Note: To be replaced by prEN 3869 (2003-05).
EN 40-6-2002 灯柱 第6部分：铝灯柱要求 Lighting columns - Part 6: Requirements for aluminium lighting columns
EN 4054-2003 航空航天系列　管连接、松套法兰和密封件　碳氟橡胶密封件和铝合金附件　技术规范 Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy; Technical specification / Note: To be replaced by prEN 4054 (2003-05).
EN 4114-2001 航空航天系列　带橡胶垫减震的铝合金环形Ｐ型卡箍　尺寸、质量 Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses
EN 4324-2001 航空航天系列　铝合金AL-W42201　焊接用填缝金属杆 Aerospace series - Aluminium alloy AL-W42201 - Filler metal for welding; Rod
EN 4341-2001 航空航天系列　铝合金 AL-W46431　焊接用填缝金属丝和杆 Aerospace series - Aluminium alloy AL-W46431 - Filler metal for welding; Wire and rod
EN 485-1-1993 铝和铝合金 片材、带材和板材 第1部分：检验和交货的技术条件 Aluminium and aluminium alloys-Sheet, strip, and plate-Part 1: Technical conditions for inspection and delivery
EN 485-2-1994 铝和铝合金 片材、带材和板材 第2部分：机械性能 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
EN 485-3-2003 铝和铝合金 片材、带材和板材 第3部分：热轧制品的形状和尺寸公差 Aluminium and aluminium alloys - Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products
EN 485-4-1993 铝和铝合金 片材、带材和板材 第4部分：冷轧制品的形状和尺寸公差 Aluminium and aluminium alloys-Sheet, strip and plate-Part 4: Tolerances on shape and dimensions for cold-rolled products
EN 486-1993 铝和铝合金 挤压铸锭 规范 Aluminium and aluminium alloys-Extrusion ingots-Specifications
EN 487-1993 铝和铝合金 轧锭 规范 Aluminium and aluminium alloys- Rrolling ingots- Specifications
EN 50052-1986+A2-1993 充气高压开关控制设备用铸铝合金外壳 Cast aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
EN 50064-1989+A1-1993 充气高压开关控制设备用锻制铝和铝合金外壳 Wrouhgt aluminium and aluminium alloy enclosures for gas-filled high-voltage switchgear and controlgear
EN 50069-1991+A1-1993 充气高压开关设备和控制设备用铸铝合金和锻铝合金焊接的混合材料　 外壳规范 Welded composite enclosures of cast and wrought aluminium alloys for gas-filled high-voltage switchgear and controlgear
EN 50183-2000 架空导线　铝镁硅合金导线 Conductors for overhead lines - Aluminium-magnesium-silicon alloy wires
EN 507-1999 金属薄板材制成的屋顶产品 铝薄板材全支撑屋顶产品规范 Roofing products from metal sheet - Specification for fully supported roofing products of aluminium sheet
EN 508-1-2000 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范 第1部分：钢 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
EN 508-2-2000 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范 第2部分：铝 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
EN 508-3-2000 金属薄板材制成的屋顶产品 钢、铝或不锈钢薄板自支撑产品规范 第3部分：不锈钢 Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
EN 515-1993 铝和铝合金 锻制品 韧度表示方法 Aluminium and aluminium alloys; wrought products; Temper designations
EN 541-1995 铝和铝合金 辊压罐头、封闭塞和盖子产品 规范 Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications
EN 546-1-1996 铝及铝合金 箔 第1部分：检验和交货的技术条件 Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery
EN 546-2-1996 铝及铝合金 箔 第2部分：机械性能 Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties
EN 546-3-1996 铝及铝合金 箔 第3部分：尺寸公差 Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions
EN 546-4-1997 铝及铝合金 箔 第4部分：特殊性能要求 Aluminium and aluminium alloys - Foil - Part 4: Special property requirements
EN 570-1994 铝和铝合金 来自于锻制品的冲击挤压铝块 规范 Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specifications
EN 573-1-1994 铝和铝合金 锻制产品化学成分和外形 第1部分：数字标记系统 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
EN 573-2-1994 铝和铝合金 锻制产品化学成分和外形 第2部分：基于标记系统的化学符号 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system
EN 573-3-2003 铝和铝合金 锻制产品化学成分和外形 第3部分：化学成分 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition
EN 573-4-1994 铝和铝合金 锻制产品化学成分和外形 第4部分：产品外形 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products
EN 575-1995 铝和铝合金 熔铸生产的母合金 规范 Aluminium and aluminium alloys - Master alloys produced by melting - Specifications
EN 576-1995 铝和铝合金 再熔非合金铝锭 规范 Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications
EN 577-1995 铝和铝合金 液体金属 规范 Aluminium and aluminium alloys - Liquid metal - Specifications
EN 586-1-1997 铝和铝合金 锻件 第1部分：检验和交货的技术条件 Aluminium and Alluminium alloys - Forgings - Part 1: Technical conditions for inspection and delivery
EN 586-2-1994 铝和铝合金 锻件 第2部分：机械特性和附加特性要求 Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements
EN 586-3-2001 铝和铝合金 锻件 第3部分：尺寸和形状公差 Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
EN 601-1994 铝和铝合金 铸件 与食品接触用铸件的化学成分 Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with food
EN 602-1994 铝和铝合金 锻制品 生产与食品接触的材料中使用的半成品的化学成分 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food
EN 603-1-1996 铝和铝合金 锻坯 第1部分：检验和交货的技术条件 Aluminium and aluminium alloys - Wrought forging stock - Part 1: Technical conditions for inspection and delivery
EN 603-2-1996 铝和铝合金 锻坯 第2部分：机械性能 Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties
EN 603-3-2000 铝和铝合金 锻坯 第3部分：尺寸和形状公差 Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
EN 60317-0-3-1998+A1-2000 特种绕组线规范　第0部分：一般要求　第3节:漆包圆铝线 Specifications for particular types of winding wires - Part 0: General requirements - Section 3: Enamelled round aluminium wire (IEC 60317-0-3:1997)
EN 60317-15-1994+A1-1998 特种绕组线规范　第15部分：180级聚酯酰亚胺漆包圆铝线 Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 (IEC 60317-15:1990)
EN 60317-25-1996+A1-1997+A2-1998 特种绕组线规范　第25部分：200级聚酰胺-酰亚胺包敷聚酯或聚酯酰亚胺漆包圆铝线　 Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 (IEC 60317-25:1990)
EN 604-1-1997 铝和铝合金 铸锻件坯 第1部分：检查和交付的技术条件 Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and delivery
EN 604-2-1997 铝和铝合金 铸锻件坯 第2部分：尺寸和形状公差 Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form
EN 60889-1997 架空线导线用硬拉制铝线 Hard-drawn aluminium wire for overhead line conductors (IEC 60889:1987)
EN 61044-1992 牵引用铝酸蓄电池组的利用机会充电 Opportunity-charging of lead-acid traction batteries (IEC 61044:1990)
EN 61232-1995+A11-2000 电气用铝包钢线 Aluminium-clad steel wires for electrical purposes (IEC 61232:1993, modified)
EN 683-1-1996 铝和铝合金 散热片坯料 第1部分：检验和交货技术条件 Aluminium and aluminium alloys - Finstock - Part 1: Technical conditions for inspection and delivery
EN 683-2-1996 铝和铝合金 散热片坯料 第2部分：机械特性 Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
EN 683-3-1996 铝和铝合金 散热片坯料 第3部分：尺寸和形状公差 Aluminium and aluminium alloys - Finstock - Part 3: Tolerances on dimensions and form
EN 725-1-1997 先进技术陶瓷 陶瓷粉的试验方法 第1部分：氧化铝中杂质的测定 Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina
EN 754-1-1997 铝和铝合金 冷拔棒材/条材和管材 第1部分：检验和交货技术条件 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
EN 754-2-1997 铝和铝合金 冷拔棒材/条材和管材 第2部分：机械特性 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
EN 754-3-1995 铝和铝合金 冷拔棒材/条材和管材 第3部分：圆形棒材的尺寸和形状公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
EN 754-4-1995 铝和铝合金 冷拔棒材/条材和管材 第4部分：方形条材的尺寸和形状公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
EN 754-5-1995 铝和铝合金 冷拔棒材/条材和管材 第5部分：矩形棒材的尺寸和形状公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
EN 754-6-1995 铝和铝合金 冷拔棒材/条材和管材 第6部分：六角形条材的尺寸和形状公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
EN 754-7-1998 铝和铝合金 冷拔棒材/条材和管材 第7部分：无缝管的尺寸和形状公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
EN 754-8-1998 铝和铝合金 冷拔棒材/条材和管材 第8部分：舷窗管的尺寸和形状公差 Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 8: Porthole tubes, tolerances on dimensions and form
EN 755-1-1997 铝和铝合金 挤压棒材/条材、管材和型材 第1部分：检验和交货的技术条件 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
EN 755-2-1997 铝和铝合金 挤压棒材/条材、管材和型材 第2部分：机械特性 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
EN 755-3-1995 铝和铝合金 挤压棒材/条材、管材和型材 第3部分：圆形棒材的尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 3: Round bars, tolerances on dimensions and form
EN 755-4-1995 铝和铝合金 挤压棒材/条材、管材和型材 第4部分：方形条材的尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 4: Square bars, tolerances on dimensions and form
EN 755-5-1995 铝和铝合金 挤压棒材/条材、管材和型材 第5部分：矩形棒材的尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 5: Rectangular bars, tolerances on dimensions and form
EN 755-6-1995 铝和铝合金 挤压棒材/条材、管材和型材 第6部分：六角形条材的尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Partie 6: Hexagonal bars, tolerances on dimensions and form
EN 755-7-1998 铝和铝合金 挤压棒材/条材、管材和型材 第7部分：无缝管的尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 7: Seamless tubes, tolerances on dimensions and form
EN 755-8-1998 铝和铝合金 挤压棒材/条材、管材和型材 第8部分：出口孔的尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 8: Porthole tubes, tolerances on dimensions and form
EN 755-9-2001 铝和铝合金 挤压棒材/条材、管材和型材 第9部分：型材的尺寸和形状公差 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
EN 851-1995 铝和铝合金 生产烹调器具用的圆坯料 规范 Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
EN 878-1997 人类用水处理用的化学制品 硫酸铝 Chemicals used for treatment of water intended for human consumption - Aluminium sulfate
EN 881-1997 人类用水处理用的化学制品 氯化铝、氯化铝氢氧化物和硫酸盐氯化铝氢氧化物( 单体) Chemicals used for treatment of water intended for human consumption - Aluminium chloride, aluminium chloride hydroxide and aluminium chloride hydroxide sulfate (monomeric)
EN 882-1997 人类用水处理用的化学制品 铝酸钠 Chemicals used for treatment of water intended for human consumption - Sodium aluminate
EN 883-1997 人类用水处理用的化学制品 聚羟基氯化铝和聚羟基硫酸盐氯化铝 Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate
EN 885-2001 人类用水处理用的化学制品 多硅酸盐氯化铝氢氧化物 Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate
EN 886-2001 人类用水处理用的化学制品 多硅酸盐硫酸盐铝氢氧化物 Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate
EN 887-2001 人类用水处理用的化学制品 硫酸盐三铁铝 Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) sulfate
EN 935-2001 人类用水处理用的化学制品 氯化铝铁（III）（单体）和氯化烃铝铁（III）（单体） Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric)
EN 941-1995 铝和铝合金 一般应用的圆形和圆形原料 规范 Aluminium and aluminium alloys - Circle and circle stock for general applications - Specifications
EN 955-2-1995 耐熔产品的化学分析 第2部分：含有硅和/或铝的产品（湿分析法） Chemical analysis of refractory products - Part 2: Products containing silica and/or alumina (wet method)
EN ISO 105-X01-1995 纺织品　色牢度试验　第X01部分：耐碳化色牢度：硫化铝法 Textiles - Tests for colour fastness - Part X01: Colour fastness to carbonizing: Aluminium chloride (ISO 105-X01:1993)
EN ISO 11126-7-1999 涂装油漆和有关产品前钢材预处理　喷射清理用非金属磨料的技术要求第7部分：熔融氧化铝 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995)
EN ISO 12020-2000 水质　铝的测定　原子吸收光谱法 Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997)
EN ISO 12215-3-2002 小艇　船体结构和尺寸　第3部分：材料：钢、铝合金、木材、其它材料 Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002)
EN ISO 13919-2-2001 焊接　电子束和激光焊接头　缺陷的质量分级指南　第2部分：铝及其可焊合金 Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001)
EN ISO 14713-1999 钢结构腐蚀防护　锌和铝镀层　指南 Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines (ISO 14713:1999)
EN ISO 15546-2002 石油和天然气工业 铝合钻管　 Petroleum and natural gas industries - Aluminium alloy drill pipe (ISO 15546:2002)
EN ISO 3262-16-2000 涂料用填充剂　规范和测试方法　第16部分：氢氧化铝 Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides (ISO 3262-16:2000)
EN ISO 3262-18-2000 涂料用填充剂　规范和测试方法　第18部分：沉淀硅铝酸钠 Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate (ISO 3262-18:2000)
EN ISO 3613-2001 锌、镉、铝锌合金和锌铝合金的铬酸盐转化膜　试验方法 Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods (ISO 3613:2000)
EN ISO 8362-3-2003 注射剂用注射器容器及附件 第3部分：注射瓶铝盖 Injection containers and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001)
EN ISO 8536-3-1999+AC-1999 医用输液器具　第3部分：输液瓶铝盖 Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:1992)
EN ISO 8872-2003 输血、输液和注射瓶铝盖 一般要求和试验方法 Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods (ISO 8872:2003)
EN ISO 9692-3-2001 焊接和相关工艺　接头制备的建议　第3部分：铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊　 Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000)
ENV 14226-2002 高级陶瓷 陶粉的试验方法 用感应耦合等离子原子发射光谱法或火焰原子吸收光谱法测定氮化硅中的钙、镁、 Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (I
ENV 1999-1-1-1998 欧洲法典9：铝结构设计 第1-1部分：一般规则 建筑物的一般规则 Eurocode 9: Design of aluminium structures - Part 1-1: General rules - General rules and rules for buildings
ENV 1999-1-2-1998 欧洲法典 9：铝结构设计 第1-2部分：一般规则 结构防火设计 Eurocode 9: Design of aluminium structures - Part 1-2: General rules - Structural fire design
ENV 1999-2-1998 欧洲法典9：铝结构设计 第2部分：易疲劳结构 Eurocode 9: Design of aluminium structures - Part 2: Structures susceptible to fatigue
ENV 725-4-1994 先进技术陶瓷 陶瓷粉的试验方法 第4部分：XRF分析法测定氮化铝中氧的含量 Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of the oxygen content in aluminium nitride by XRF analysis
ENV 955-4-1997 耐熔产品的化学分析 第4部分：含有硅和/或铝的产品（通过火焰原子吸收光谱法（FAAS）和诱导偶合等离子原子 Chemical analysis of refractory products - Part 4: Products containing silica and/or alumina (Analysis by Flame Atomic Absorption Spectrometry (FAAS) and Inductively Coupled Plasma Atomic Emission Spectrography (ICP))
prEN 10318-2000 锌基和铝基金属镀层厚度和化学成分的测定　常规方法 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
prEN 12206-1-2001 色漆和清漆　建筑用途的铝和铝合金涂层　第1部分：由粉末涂料的配制涂层 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from powder coating materials
prEN 12258-2-2001 铝和铝合金　术语和定义　第2部分：化学分析 Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis
prEN 12441-8-2002 锌和锌合金　化学分析　第8部分：用电感耦合等离子原子发射光谱测定铅、铁和铝 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc; Flame atomic absorption spectrometric method
prEN 130310-1993 分规范：非固体电解质铝电解质电容器(能力批准)　 Sectional specification: aluminium electrolytic capacitors with non-solid electrolyte (capability approval)
prEN 130311-1993 空白详细规范：非固体电解质铝电解质电容器(能力批准)　 Blank detail specification: aluminium electrolytic capacitors with non-solid electrolyte (capability approval)
prEN 13981-2-2001 铝和铝合金　铁路结构用产品，检验和交货技术条件　第2部分：板材和片材 Aluminium and aluminium alloys - Products for structural railway applications; Technical conditions for inspection and delivery - Part 2: Plates and sheets
prEN 14095-2003 建筑物内部的水质处理设备　用铝阳极的电解配料系统　试验、安全和性能的要求 Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance and safety, testing
prEN 14242-2001 铝及铝合金 化学分析 感应耦合等离子发射光谱分析 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
prEN 14286-2001 铝及铝合金 危险货物运输和贮存罐的可焊轧制产品 Aluminium and aluminium alloys - Weldable rolled products for tanks for the storage and transportation of dangerous goods
prEN 14287-2001 铝及铝合金 制造包装及包装部件用铝材化学成分的特殊要求 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components
prEN 14361-2001 铝及铝合金 化学分析 金属熔化取样 Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
prEN 14369-2003 人类生活用水的处理用产品 铁涂覆活性颗粒氧化铝 Products used for treatment of water intended for human consumption - Iron coated granular activated alumina
prEN 14391-2002 包装 可活动铝管 危险感觉警告 Packaging - Collapsible aluminium tubes - Tactile warnings of danger
prEN 14392-2003 铝及铝合金 与食物接触的阳极处理产品的特殊要求 Aluminium and aluminium alloys - Special requirements for anodised products for use in contact with food
prEN 2004-2-1997 航空航天系列 铝和铝合金产品试验方法 第2部分：电镀、锻造和挤压的超声试验 Test methods for aluminium and aluminium alloy products - Part 2: Ultrasonic testing of plates, forgings and extrusions; Aerospace series
prEN 2051-1977 航空航天系列 L型材 铝合金褶皱截面 尺寸 L-section; aluminium alloy folded profiles; dimensions; aerospace series
prEN 2052-1977 航空航天系列 L型材 具有内唇状凸缘的铝合金褶皱截面 尺寸 L-section; aluminium alloy folded profiles with internally lipped flanges; dimensions; aerospace series
prEN 2053-1977 航空航天系列 U型材 铝合金褶皱截面 尺寸 U-section; aluminium alloy folded profiles; dimensions; aerospace series
prEN 2054-1977 航空航天系列 U型材 具有外唇状凸缘的铝合金褶皱截面 尺寸 U-section; aluminium alloy folded profiles with externally lipped flanges; dimensions; aerospace series
prEN 2055-1977 航空航天系列 U型材 具有内唇状凸缘的铝合金褶皱截面 尺寸 U-section; aluminium alloy folded profiles with internally lipped flanges; dimensions; aerospace series
prEN 2056-1977 航空航天系列 Z型材 铝合金褶皱截面 尺寸 Z-section; aluminium alloy folded profiles; dimensions; aerospace series
prEN 2057-1977 航空航天系列 Z型材 具有一个唇状凸缘的铝合金褶皱截面 尺寸 Z-section; aluminium alloy folded profiles with one lipped flange; dimensions; aerospace series
prEN 2059-1977 航空航天系列 TOP hat型材 铝合金褶皱截面 尺寸 Top hat section; aluminium alloy folded profiles; dimensions; aerospace series
prEN 2060-1977 航空航天系列 Bowler hat型材 带唇状凸缘的铝合金褶皱截面 尺寸 Bowler hat section; aluminium alloy folded profiles; dimensions; aerospace series
prEN 2061-1977 航空航天系列 TOP hat型材 带唇状凸缘的铝合金褶皱截面 尺寸 Top hat section; aluminium alloy folded profiles with lipped flanges; dimensions; aerospace series
prEN 2086-1998 航空航天系列 铝合金AL-P2618A-T851-手工锻件a≤150mm Aerospace series - Aluminium alloy AL-P2618A-T851 - Hand forgings a 150 mm
prEN 2087-1998 航空航天系列 铝合金AL-P2014A-T6或T62-包层薄板和带材-0.4毫米a6毫米 Aerospace series - Aluminium alloy AL-P2014A-T6 or T62 - Clad sheet and strip - 0,4 mm a 6 mm
prEN 2090-1998 航空航天系列 铝合金AL-P2024-T3 包层薄板和带材 0.3毫米a6毫米 Aerospace series - Aluminium alloy AL-P2024-T3 - Clad sheet and strip - 0,3 mm a 6 mm
prEN 2091-1976 航空航天系列 铝合金AL-P13P1-T4 包层薄板和带材 Aluminium alloy AL-P13 PI-T4; clad sheets and strips; aerospace series
prEN 2123-1999 航空航天系列 铝合金AL-P2618-T851 板材 6mm≤a≤140mm Aerospace series - Aluminium alloy AL-P2618A-T851 - Plate, 6 mm ≤ a ≤ 140 mm
prEN 2124-1999 航空航天系列 铝合金AL-P2214-T651 板材 6mm≤a≤140mm Aerospace series - Aluminium alloy AL-P2214-T651 - Plate, 6 mm ≤ a ≤ 140 mm
prEN 2143-1998 航空航天系列 1050A型铝制的万能分度头型实心铆钉 英制系列 Aerospace series - Rivets, solid, universal head, in aluminium 1050A, inch based series
prEN 2146-1998 航空航天系列 2017A型铝制的万能分度头型实心铆钉 英制系列 Aerospace series - Rivets, solid, universal head, in aluminium 2017A, inch based series
prEN 2148-1998 航空航天系列 5056A型铝制的万能头型实心铆钉 英制系列 Aerospace series - Rivets, solid, universal head, in aluminium 5056A, inch based series
prEN 2256-1998 航空航天系列 铝合金AL-P2618A-T852 手工锻造a ≤ 150 mm Aerospace series - Aluminium alloy AL-P2618A-T852 - Hand forgings a ≤ 150 mm
prEN 2345-1982 航空航天系列 铝和铝合金铆钉 技术规范 Aerospace series; aluminium and aluminium alloy rivets; technical specification
prEN 2345-2-1999 航空航天系列 铝和铝合金实芯铆钉 米制系列 技术规范 Aerospace series - Rivets, solid, in aluminium or aluminium alloy, metric series - Technical specification
prEN 2382-1998 航空航天系列 AL-P2214-T6铝合金 a 100 mm手工和模压锻件 Aerospace series - Aluminium alloy AL-P2214-T6 - Hand and die forgings a 100 mm
prEN 2383-1998 航空航天系列 AL-P2214-T4铝合金 a 100 mm手工和模压锻件 Aerospace series - Aluminium alloy AL-P2214-T4 - Hand and die forgings a 100 mm
prEN 2386-1998 航空航天系列 AL-P7075-T7352铝合金 a或D 150mm手工锻造 Aerospace series - Aluminium alloy AL-P7075-T7352 - Hand forgings a 150 mm
prEN 2419-1999 航空航天系列 铝合金AL-P2024-T351 板材 6 mm≤ a ≤ 80 mm Aerospace series - Aluminium alloy AL-P2024-T351 - Plate, 6 mm ≤ a ≤ 80 mm
prEN 2485-1998 航空航天系列 铝合金AL-P2214 锻坯 Aerospace series - Aluminium alloy AL-P2214 - Forging stock
prEN 2486-1998 航空航天系列 铝合金AL-P2618A 锻坯 Aerospace series - Aluminium alloy AL-P2618A - Forging stock
prEN 2511-1998 航空航天系列 铝合金AL-P7075-T7351 板材 6 mm a 100 mm Aerospace series - Aluminium alloy AL-P7075-T7351 - Plate, 6 mm a 100 mm
prEN 2512-1999 航空航天系列 铝合金AL-P7175-T7351 板材 6 mm a 100 mm Aerospace series - Aluminium alloy AL-P7175-T7351 - Plate, 6 mm a 100 mm
prEN 2550-1999 航空航天系列　1050A型铝制100°沉头实心铆钉　英制系列 Aerospace series - Rivets, solid, 100?countersunk normal head, in aluminium 1050A, inch based series
prEN 2551-1999 航空航天系列　2117型铝合金制100°沉头圆顶实心铆钉　英制系列 Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2117, inch based series
prEN 2552-1999 航空航天系列　阳极氧化或铬酸盐表面处理的2117型铝合金100°沉头圆顶实心铆钉　英制系列 Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2117, anodized or chromated, inch based series
prEN 2553-1999 航空航天系列　2017A型铝合金制100°沉头圆顶实心铆钉　英制系列 Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 2017A, inch based series
prEN 2555-1999 航空航天系列　5056A型铝合金制100°沉头圆顶实心铆钉　英制系列 Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 5056A, inch based series
prEN 2556-1999 航空航天系列　阳极氧化或铬酸盐表面处理的5056A型铝合金制 100°沉头圆顶实心铆钉　英制系列 Aerospace series - Rivets, solid, 100?countersunk normal head with dome, in aluminium alloy 5056A, anodized or chromated, inch based series
prEN 2635-1998 航空航天系列　 Al-P2014A-T6511铝合金 a 或D≤200 mm的周围有粗粒控制的挤压杆和部件　 Aerospace series - Aluminium alloy Al-P2014A-T6511 - Extruded bar and section - a or D ≤ 200 mm - With peripheral coarse grain control
prEN 2681-1998 航空航天系列　AL-P7010-T74铝合金　手工锻件和硬模锻件 a ≤150 mm Aerospace series - Aluminium alloy AL-P7010-T74 - Hand and die forgings a 150 mm
prEN 2682-1998 航空航天系列　AL-P7010-T7452铝合金　 手工锻件和硬模锻件 a≤ 150 mm Aerospace series - Aluminium alloy AL-P7010-T7452 - Hand and die forgings a 150 mm
prEN 2683-1998 航空航天系列　AL-P7010-T7651铝合金　 手工锻件和硬模锻件 a ≤ 150 mm Aerospace series - Aluminium alloy AL-P7010-T7651 - Hand forgings a 150 mm
prEN 2684-1999 航空航天系列　AL-P7010-T7651铝合金　板材 6 mm ≤ a ≤ 140 mm Aerospace series - Aluminium alloy AL-P7010-T7651 - Plate 6 mm a 140 mm
prEN 2686-1998 航空航天系列　AL-P7010-T7451铝合金　手工锻件 a ≤ 150 mm Aerospace series - Aluminium alloy AL-P7010-T7451 - Hand forgings a 150 mm
prEN 2687-1999 航空航天系列　AL-P7010-T7451铝合金　板材 6 mm ≤ a≤ 160 mm Aerospace series - Aluminium alloy AL-P7010-T7451 - Plate 6 mm a 160 mm
prEN 2688-1998 航空航天系列　AL-P7050-T74铝合金 硬模锻件 a ≤150 mm Aerospace series - Aluminium alloy AL-P7050-T74 - Die forgings a 150 mm
prEN 2690-1998 航空航天系列　AL-P7050-T7452铝合金　手工锻件　 a ≤ 200 mm Aerospace series - Aluminium alloy AL-P7050-T7452 - Hand forgings - a 200 mm
prEN 2702-1998 航空航天系列　AL-P6061-T6或T62铝合金　拔拉或挤压杆和型材　 a 或 D ≤ 150 mm　 Aerospace series - Aluminium alloy AL-P6061-T6 or T62 - Drawn or extruded bar and section - a or D ≤ 150 mm
prEN 2726-2001 航空航天系列　AL-C42201 T6铝合金　沙模铸件 a ≤20 mm Aerospace series - Aluminium alloy AL-C42201 T6 - Sand casting a 20 mm
prEN 2728-2001 航空航天系列　AL-C42101 T6铝合金　沙模铸件 a ≤20 mm Aerospace series - Aluminium alloy AL-C42101 T6 - Sand casting a 20 mm
prEN 2802-1999 航空航天系列 　AL-P7475-T761铝合金　薄板和带材 0,6 mm ≤a≤6 mm Aerospace series - Aluminium alloy AL-P7475-T761 - Sheet and strip 0,6 mm a 6 mm
prEN 2803-1999 航空航天系列　AL-P7475-T761铝合金　复合薄板和带材1 mm ≤a ≤ 6 mm Aerospace series - Aluminium alloy AL-P7475-T761 - Clad sheet and strip 1 mm a 6 mm
prEN 2804-1999 航空航天系列　AL-P7075-T7651铝合金　板材6 mm ≤ a ≤ 25 mm Aerospace series - Aluminium alloy AL-P7075-T7651 - Plate, 6 mm a 25 mm
prEN 2805-1999 航空航天系列　 AL-P7475-T7651铝合金　板材6 mm≤a≤40 mm Aerospace series - Aluminium alloy AL-P7475-T7651 - Plate, 6 mm a 40 mm
prEN 2813-1999 航空航天系列　AL-P6061-T6铝合金 　压力用拉管 0,6 mm≤a≤12,5 mm Aerospace series - Aluminium alloy AL-P6061-T6 - Drawn tube for pressure applications 0,6 mm a 12,5 mm
prEN 288-13-1995 金属材料焊接程序规范和鉴定 第13部分：铝和铸锻材料化合物弧焊的焊接程序试验 Specification and approval of welding procedures for metallic materials - Part 13: Welding procedure tests for the arc welding of aluminium and combinations of cast to wrought material (ISO 9956-3:1995)
prEN 3115-2000 航空航天系列 AL-P7050铝合金铆钉用铝丝　D≤10 mm Aerospace series - Aluminium alloy AL-P7050 - Wire for rivets - D 10 mm
prEN 3124-2001 航空航天系列 　AL-C42201 T6铝合金　高强度铸件 a ≤ 20 mm Aerospace series - Aluminium alloy AL-C42201 T6 - High strength casting a 20 mm
prEN 3125-2001 航空航天系列　AL-C42201 T6铝合金　熔模铸件 a ≤20 mm Aerospace series - Aluminium alloy AL-C42201 T6 - Investment casting a 20 mm
prEN 3332-1999 航空航天系列　铝合金 AL-P7475-T762　 1 mm≤a≤6 mm复合薄板和带材 Aerospace series - Aluminium alloy AL-P7475-T762 - Clad sheet and strip 1 mm a 6 mm
prEN 3333-1999 航空航天系列　铝合金 AL-P7475-T762　0,6 mm≤a≤6 mm复合薄板和带材 Aerospace series - Aluminium alloy AL-P7475-T762 - Sheet and strip 0,6 mm a 6 mm
prEN 3335-1999 航空航天系列　铝合金 AL-P7475-O2 　0,8 mm≤a≤6 mm超塑性模压板材 Aerospace series - Aluminium alloy AL-P7475-O2 - Sheet for superplastic forming (SPF) 0,8 mm a 6 mm
prEN 3336-1999 航空航天系列　铝合金 AL-P7150-T651 6 mm≤a≤40 mm板材 Aerospace series - Aluminium alloy AL-P7150-T651 - Plate, 6 mm a 40 mm
prEN 3338-1999 航空航天系列　铝合金 AL-P7050-T74511a 或 D≤150 mm具有边缘粗颗粒控制挤压棒和型材 Aerospace series - Aluminium alloy AL-P7050-T74511 - Extruded bar and section a or D 150 mm with peripheral coarse grain control
prEN 3339-1998 航空航天系列　铝合金 AL-P7010-T76　a≤200 mm模锻件 Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a 200 mm
prEN 3341-1998 航空航天系列　铝合金 Al-P6061　T4 或 T42 　0,4 mm≤a≤6 mm薄板及带材 Aerospace series - Aluminium alloy Al-P6061-T4 or T42 - Sheet and strip - 0,4 mm a 6 mm
prEN 3342-1998 航空航天系列　铝合金 AL-P6061　T4 或 T42　a或D ≤150 mm拉制或挤压棒和型材 Aerospace series - Aluminium alloy AL-P6061-T4 or T42 - Drawn or extruded bar and section - a or D 150 mm
prEN 3344-1999 航空航天系列　铝合金 AL-P7050-T76511　a 或 D ≤150 mm 具有边缘粗颗粒控制挤压棒和型材 Aerospace series - Aluminium alloy AL-P7050-T76511 - Extruded bar and section a or D 150 mm with peripheral coarse grain control
prEN 3346-1997 航空航天系列　铝合金 AL-P2014A-T3　0,6 mm≤a≤12,5 mm结构用的拉制管 Aerospace series - Aluminium alloy AL-P2014A-T3 - Drawn tube for structural applications - 0,6 mm a 12,5 mm
prEN 3347-1998 航空航天系列　铝合金 Al-P2024-T8511　a 或 D≤150 mm　带边缘粗颗粒控制挤压棒和型材 Aerospace series - Aluminium alloy Al-P2024-T8511 - Extruded bar and section - a or D 150 mm - With peripheral coarse grain control
prEN 3474-1998 航空航天系列　AL-P2024-T81铝合金 　0,25 mm ≤a≤6 mm薄板和带材 Aerospace series - Aluminium alloy AL-P2024-T81 - Sheet and strip - 0,25 mm a 6 mm
prEN 3553-1999 航空航天系列　AL-P2618A-T6511铝合金 　挤压棒和型材 a 或 D≤160 mm Aerospace series - Aluminium alloy AL-P2618A-T6511 - Extruded bar and section a or D 160 mm
prEN 3557-1997 航空航天系列　AL-P6061-T4铝合金 　压力用拉制管 0,6 mm ≤a≤3,0 mm Aerospace series - Aluminium alloy AL-P6061-T4 - Drawn tube for pressure applications 0,6 mm a 3,0 mm
prEN 3719-1999 航空航天系列　电缆用铝和铝合金导体　产品标准　 Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard
prEN 3982-2000 航空航天系列　铝合金 AL-P7050-T7451　板6 mm≤a≤160 mm Aerospace series - Aluminium alloy AL-P7050-T7451 - Plate 6 mm a 160 mm
prEN 3983-2000 航空航天系列　铝合金AL-P7050-T7651　板6 mm≤a≤160 mm 　 Aerospace series - Aluminium alloy AL-P7050-T7651 - Plate 6 mm a 160 mm
prEN 4071-1999 航空航天系列　铝 IVD涂层钛合金标准六角头紧公差普通柄短螺纹螺栓　等级：1100 MPa(环境温度) /425℃ Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
prEN 4072-1999 航空航天系列　铝 IVD涂层钛合金、100°埋头标准头偏十字凹槽紧公差普通柄短螺纹螺钉　等级：1100 MPa(环境 Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
prEN 4100-1993 航空航天系列　铝合金 AL-P2219-T62　薄板和带材 0,5 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P2219-T62 - Sheet and strip 0,5 mm a 6 mm
prEN 4127-1999 航空航天系列　钛合金铝 IVD涂层、标准六角头松公差普通柄短螺纹螺栓　等级：1100 MPa (环境温度)/425 ℃ Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVDcoated - Classification: 1100 MPa (at ambient temperature)/425℃
prEN 4128-1999 航空航天系列　耐热镍基合金铝 IVD涂层、标准六角边头松公差普通柄短螺纹螺栓　等级：1250 MPa (环境温度)/ Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425℃
prEN 4174-1999 航空航天系列　阳极氧化或铬酸盐处理铝合金 2024、铆紧剪式垫圈　米制 Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series
prEN 4176-1999 航空航天系列　阳极氧化或有铝色涂层钛合金TI-P64001、100°埋头标准头或突出头的张力剪式紧公差锁紧螺栓、 Aerospace series - Lockbolts, 100?countersunk normal head or protruding head, tension-sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric
prEN 4204-1999 航空航天系列　铝合金 AL-P8090-T841　薄板 0,6 mm≤a≤6 mm Aerospace series - Aluminium alloy AL-P8090-T841 - Sheet 0,6 mm a 6 mm
prEN 4207-1999 航空航天系列　铝合金 AL-P8090-T89周围粗粒控制的挤压棒和型材　a 或 D≤15 mm Aerospace series - Aluminium alloy AL-P8090-T89 - Extruded bar and section, a or D 15 mm with peripheral coarse grain control
prEN 4272-1997 航空航天系列　铝合金 AL-P2219-T854　锻件 a ≤200 mm Aerospace series - Aluminium alloy AL-P2219-T854 - Die forgins, a 200 mm
prEN 4273-1997 航空航天系列　铝合金 AL-P6082-T6511　挤压棒和型材、a或 D ≤200 mm Aerospace series - Aluminium alloy AL-P6082-T6511 - Extruded bar and section, a or D 200 mm
prEN 4274-1997 航空航天系列　铝合金 AL-P6082-T6511周围粗粒控制的挤压棒和型材 a 或 D≤200 mm Aerospace series - Aluminium alloy AL-P6082-T6511 - Extruded bar and section, a or D 200 mm with peripheral coarse grain control
prEN 4275-1997 航空航天系列　铝合金 AL-P7075-T76511周围粗粒控制的挤压棒和型材 a 或 D ≤100 mm　 Aerospace series - Aluminium alloy AL-P7075-T76511 - Extruded bar and section, a or D 100 mm with peripheral coarse grain control
prEN 4276-1998 航空航天系列　铝合金 AL-P7175-T7351　手制锻件 a ≤150 mm Aerospace series - Aluminium alloy AL-P7175-T7351 - Hand forgings a 150 mm
prEN 4277-1998 航空航天系列　铝合金 AL-P7175-T7351　手制锻件和模件锻 a ≤125 mm Aerospace series - Aluminium alloy AL-P7175-T73 - Hand and die forgings a 125 mm
prEN 4278-1998 航空航天系列　铝合金 AL-P7175-T7352　手制锻件和模锻件 a ≤150 mm Aerospace series - Aluminium alloy AL-P7175-T7352 - Hand and die forgings a 150 mm
prEN 4282-1998 航空航天系列　铝合金 AL-P2219-T37　板材 6 mm ≤a≤ 40 mm Aerospace series - Aluminium alloy AL-P2219-T37 - Plate 6 mm a 40 mm
prEN 4283-1998 航空航天系列　铝合金 AL-P2219-T87 　板材 6 mm≤a≤40 mm Aerospace series - Aluminium alloy AL-P2219-T87 - Plate 6 mm a 40 mm
prEN 4284-1998 航空航天系列　铝合金 AL-P2219-T852　锻件 a≤400 mm Aerospace series - Aluminium alloy AL-P2219-T852 - Forgings a 400 mm
prEN 4285-1998 航空航天系列　铝合金 AL-P2219-T851　锻件a≤400 mm Aerospace series - Aluminium alloy AL-P2219-T851 - Forgings a 400 mm
prEN 4287-1998 航空航天系列　铝合金 AL-P7010　锻坯 Aerospace series - Aluminium alloy AL-P7010 - Forging stock
prEN 4288-1998 航空航天系列　铝合金 AL-P7050　锻坯 Aerospace series - Aluminium alloy AL-P7050 - Forging stock
prEN 4289-1998 航空航天系列　铝合金 AL-P7175　锻坯 Aerospace series - Aluminium alloy AL-P7175 - Forging stock
prEN 4290-1998 航空航天系列　铝合金 AL-P2219　锻坯 Aerospace series - Aluminium alloy AL-P2219- - Forging stock
prEN 4293-1998 航空航天系列　铝合金 AL-P7175-T73511　挤压棒和型材a 或 D≤150 mm Aerospace series - Aluminium alloy AL-P7175-T73511 - Extruded bar and section a or D 150 mm
prEN 4294-1998 航空航天系列　 铝合金 AL-P7175-T7354　模锻件a≤150 mm Aerospace series - Aluminium alloy AL-P7175-T7354 - Die forgings a 150 mm
prEN 4312-1999 航空航天系列　带铝色涂层制　耐热和耐腐蚀钢、松公差异径柄中等长度螺纹的双头螺栓　等级：1100 MPa (常温 Aerospace series - Studs, coarse tolerance reduced shank, medium length threads, in heat and corrosion resisting steel, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4313-1998 航空航天系列　铝合金 AL-P6013-T6　薄板和带 0,5 mm≤a≤ 6 mm Aerospace series - Aluminium alloy AL-P6013-T6 - Sheet and strip 0,5 mm a 6 mm
prEN 4360-2000 航空航天系列　阳极氧化或铬酸盐处理铝合金 7050、制１００°带圆顶短头实心铆钉　米制 Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 7050, anodized or chromated - Metric series
prEN 4361-2000 航空航天系列　阳极氧化或铬酸盐处理铝合金 5056A、制１００°带圆顶短头实心铆钉　米制 Aerospace series - Rivets, solid, 100?countersunk reduced head with dome, in aluminium alloy 5056A, anodized or chromated - Metric series
prEN 4363-1999 航空航天系列　带铝色涂层钛合金 Ti 44,5 Cb、制１００°埋头短头实心铆钉　米制 Aerospace series - Rivets, solid, 100?countersunk reduced head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating, metric series
prEN 4400-1-1999 航空航天系列　铝和铝合金锻制品　技术规范　第1部分：板材 Aerospace series - Aluminium and aluminium alloy wrought products - Technical specification - Part 1: Plate
prEN 4400-2-2000 航空航天系列　铝和铝合金锻制品　技术规范　第2部分：薄板、带材 Aerospace series - Aluminium and aluminium alloy wrought products; technical specification - Part 2: Sheet and strip
prEN 4400-3-2001 航空航天系列　铝和铝合金锻制品　技术规范　第３部分：棒材和型材 Aerospace series; Aluminium and aluminium alloy wrought products; Technical specification - Part 3: Bar and section
prEN 4401-1999 航空航天系列　米制有铝色涂层钛合金TI-P64001紧公差剪式突头锁紧螺栓　等级：1100 MPa (常温)/315℃ Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4402-1999 航空航天系列　米制有铝色涂层钛合金TI-P64001紧公差剪式100度埋头标准头锁紧螺栓　等级：1100 MPa (常温)/ Aerospace series - Lockbolts, 100?countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4403-1999 航空航天系列　有铝色涂层钛合金Ti44, 5 Cb100度埋头标准头实心铆钉　米制 Aerospace series - Rivets, solid, 100?countersunk normal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series
prEN 4404-1999 航空航天系列　有铝色涂层钛合金Ti44, 5 Cb通用头实心铆钉　米制 Aerospace series - Rivets, solid, universal head, in titanium alloy Ti 44,5 Cb, with aluminium pigmented coating - metric series
prEN 4407-1997 航空航天系列　有IVD铝涂层的钛合金全螺纹头标准六角螺栓　等级：1100 MPa(常温)/315度 Aerospace series - Bolts, normal hexagonal head, threaded to head, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
prEN 4409-1998 航空航天系列　铝和铝合金挤制方杆　厚度6 mm≤a≤200 mm-尺寸 Aerospace series - Square bars, extruded in aluminium and aluminium alloys - Thickness 6 mm a 200 mm - Dimensions
prEN 4410-1998 航空航天系列　铝和铝合金挤制矩形杆　厚度为6 mm≤a≤160 mm　尺寸 Aerospace series - Rectangular bars, extruded in aluminium and aluminium alloys - Thickness 6 mm a 160 mm - Dimensions
prEN 4448-1998 航空航天系列　AL-P7050-T7452铝合金　模锻件 a≥150 mm Aerospace series - Aluminium alloy AL-P7050-T7452 - Die forgings a 150 mm
prEN 4449-1998 航空航天系列　铝合金AL-P7050-T7651　薄板0.8≤a≤6 mm Aerospace series - Aluminium alloy AL-P7050-T7651 - Sheet 0,8 mm a 6 mm
prEN 4450-1998 航空航天系列　AL-P7050-T762铝合金　薄板 0.8≤a≤6 mm Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet 0,8 mm a 6 mm
prEN 4457-1999 航空航天系列　AL-P7050-T7351铝合金　板 6≤a≤100 mm Aerospace series - Aluminium alloy AL-P7475-T7351 - Plate 6 mm a 100 mm
prEN 4473-1999 航空航天系列　铝涂层　技术规范 Aerospace series - Aluminium pigmented coatings - Technical specification
prEN 4474-1999 航空航天系列　铝涂层　涂覆方法 Aerospace series - Aluminium pigmented coatings - Coating methods
prEN 4495-1999 航空航天系列　铝涂层阳极氧化钛合金紧公差标准体短螺纹　标准六角头螺栓　等级：1100 MPa (环境温度下)/31 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4496-1999 航空航天系列　铝涂层阳极氧化钛合金紧公差标准体短螺纹十字形埋头100度　标准头螺钉　等级：1100 MPa (环 Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4497-1999 航空航天系列　铝涂层阳极氧化钛合金紧公差标准体短螺纹十字口锥形头螺钉　等级：1100 MPa (环境温度下)/31 Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4498-1999 航空航天系列　铝涂层钝化耐热镍基合金紧公差标准体中长螺纹大双头六角头螺栓　等级：1550 MPa (环境温度下 Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1550 MPa (at ambient temperature)/315℃
prEN 4499-1999 航空航天系列　铝涂层阳极氧化钛合金紧公差标准体短螺纹十字口矮头埋头100度螺钉　等级：1100 MPa (环境温 Aerospace series - Screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4501-1999 航空航天系列　铝涂层阳极氧化钛合金紧公差标准体短螺纹带肩薄六角头螺栓　等级：1100 MPa (环境温度下)/31 Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4509-1999 航空航天系列　铝涂层阳极氧化钛合金全螺纹十字口埋头100度　标准螺钉　等级：1100 MPa (环境温度下)/315℃ Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
prEN 4525-1998 航空航天系列　铝和铝合金　试验方法　剪切试验 Aerospace series - Aluminium and aluminium alloys - Test methods - Shear testing
prEN 4527-1998 航空航天系列　铝和铝合金制品　试验方法　应力开裂敏感度的测定 Aerospace series - Aluminium and aluminium alloy products - Test methods - Determining susceptibility to stress-corrosion cracking
prEN 485-2-1999 铝和铝合金 片材、带材和板材 第2部分：机械性能 Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
prEN 573-4-2003 铝和铝合金 锻制产品化学成分和外形 第4部分：产品外形 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products / Note: Intended as replacement for EN 573-4 (1994-08).
prEN 573-5-1999 铝和铝合金 锻制产品化学成分和外形 第5部分：标准化锻制产品的编纂法典 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 5: Codification of standardized wrought products
prEN 576-2002 铝和铝合金 再熔非合金铝锭 规范 Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications
prEN 6000-1998 航空航天系列　AL-P2024-T351铝合金　板　6.0 mm≤a≤55 mm　紧公差平面度 Aerospace series - Aluminium alloy AL-P2024-T351 - Plate - 6,0 mm a 55 mm - Close-tolerances flatness
prEN 601-2003 铝和铝合金 铸件 与食品接触用铸件的化学成分 Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff / Note: Intended as replacement for EN 601 (1994-11).
prEN 602-2003 铝和铝合金 锻制品 生产与食品接触的材料中使用的半成品的化学成分 Aluminium and aluminium alloys - Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff / Note: Intended as replacement for EN 602 (1994-11).
prEN 6025-1998 航空航天系列　板材　AL-P2024铝合金　紧公差平面度　6 mm≤a≤55 mm　厚度　尺寸 Aerospace series - Plates - Aluminium alloy 2024 - Close-tolerance flatness - Thickness 6 mm a 55 mm - Dimensions
prEN 60384-4-1999 电子设备用固定电容器 第4部分：分规范 固体和非固体电解质铝电解电容器 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification: Aluminium electrolytic capacitors with solid and non-solid electrolyte (IEC 60384-4:1998)
prEN 60384-4/prA1-1999 电子设备用固定电容器 第4部分：分规范 固体和非固体电解质铝电解电容器　修改草案１ Amendment 1 to IEC 60384-4
prEN 6050-2001 航空航天系列 　7050铝合金化学薄膜的剪型冲模锁紧紧公差的100度埋头的轧制销　 英制系列 Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head reduced, shear type, in aluminium alloy 7050, chemical film - Inch series
prEN 6051-2001 航空航天系列　3003铝合金化学薄膜剪型冲模锁紧卡圈　 英制系列　 Aerospace series - Collars, swage locking, shear type, in aluminium alloy 3003, chemical film - Inch series
prEN 6054-2001 航空航天系列　6061铝合金化学薄膜剪型冲模锁紧卡圈　 英制系列 Aerospace series - Collars, swage locking, shear type, in aluminium alloy 6061, chemical film - Inch series
prEN 60614-2-7-1995 电气装置用导管规范　第２部分：导管的特殊规范　第７节：无螺纹铝合金刚性导管 Draft IEC 614-2-7: Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy
prEN 6070-1998 航空航天系列　铝和铝合金　锻件　技术规范　通用要求 Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - General requirements
prEN 6071-1998 航空航天系列　铝和铝合金　锻件　技术规范　中厚板 Aerospace series - Aluminium and aluminium alloy - Wrought products - Technical specification - Plate
prEN 6073-1998 航空航天系列　金属材料　铝和铝合金　试验方法　冲击试验 Aerospace series - Metallic materials - Aluminium and aluminium alloys - Test methods - Drop test
prEN 6100-2001 航空航天系列　7050铝合金化学薄膜的100度埋头剪型冲模锁紧的紧公差销 Aerospace series - Pins, close tolerance, swage locking, 100?countersunk head shear type, in aluminium alloy 7050, chemical film - Inch series
prEN 61035-2-4-1995 电气装置用导管配件规范　第２部分：特殊需要　第４节：铝合金导管配件 Draft IEC 1035-2-4: Specification for conduit fittings for electrical installations - Part 2: Particular specifications - Section 4: Conduit fittings of aluminium alloy
prEN 6104-2001 航空航天系列　铝或铝合金实心铆钉　技术规范　 英制系列 Aerospace series - Rivets, solid, in aluminium or aluminium alloy - Inch series; Technical specification
prEN 61545-1995 组安全出版物　连接器件　任何材料的夹紧装置中的铝线和铝包夹紧装置中铜线的连接器件 Draft IEC 1545: Group safety publication: Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units
prEN 630-1992 铝及其焊接合金中的电弧焊接头 缺陷质量级别指南 Arc-welded joints in aluminium and its weldable alloys; guidance on quality levels for imperfections (ISO/DIS 10042 modified)
prEN 878-2002 人类用水处理用的化学制品 硫酸铝 Chemicals used for treatment of water intended for human consumption - Aluminium sulfate
prEN 879-1992 人类用水处理用低铁级硫酸铝 Aluminium sulfate, low-iron grade, used for treatment of water intended for human consumption
prEN 880-1992 人类用水处理用特殊级硫酸铝 Aluminium sulfate, special grade, used for treatment of water intended for human consumption
prEN ISO 15614-2-2000 金属焊接工艺的规范和验收　焊接工艺试验　第2部分：铝及其合金的电弧焊 Specification and approval of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2000)
prEN ISO 18273-2003 焊接消耗材料　铝及铝合金电弧焊用丝状电极、焊丝和焊条　分类 Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO/FDIS 18273:2003)
编号 中文名称 英文名称
返回