| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60055-1 AMD 1-2005 | 修改件1.额定电压18/30KV及以下的铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆).第1部分:电缆及 | Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories |
| IEC 60055-1 Edition 5.1-2005 | 额定电压18/30kV及以下铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆).第1部分:电缆及其附件的试 | Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories |
| IEC 60055-1-1997 | 额定电压18/30kV及以下铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆) 第1部分:电缆及其附件试验 | Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories |
| IEC 60055-2 AMD 1-1989 | 额定电压18/30kV及以下铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆) 第2部分:一般要求和结构要 | Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables); part 2: general and construction requirements; amendment No. 1 to IEC 60055-2:1981 |
| IEC 60055-2 AMD 2-2005 | 修改件2.额定电压18/30KV及以下的铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆).第2部分:一般要 | Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements |
| IEC 60055-2-1981 | 额定电压18/30kV及以下铜或铝导线纸绝缘金属护套电缆(不包括压气电缆和充油电缆) 第2部分:一般要求和结构要 | Paper-insulated metal-sheathed cabled for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables); Part 2: General and construction requirements |
| IEC 60104-1987 | 架空导线用铝镁硅合金导线 | Aluminium-magnesium-silicon alloy wire for overhead line conductors. |
| IEC 60105-1958 | 工业纯铝母线材料的推荐标准 | Recommendation for commercial-purity aluminium busbar material |
| IEC 60114 Corrigendum 1-1959 | 热处理型铝镁硅系铝合金母线材料的建议 | Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type; Corrigendum 1 |
| IEC 60114-1959 | 热处理型铝镁硅系铝合金母线材料的建议 | Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type |
| IEC 60121-1960 | 工业用电工退火铝导线的建议 | Recommendation for commercial annealed aluminium electrical conductor wires |
| IEC 60317-0-3-2008 | 特种绕组线规范.第0-3部分:一般要求.漆包圆铝线 | Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire |
| IEC 60317-15-2004 | 特种绕组线规范.第15部分:180级聚酯酰亚胺漆包圆铝线 | Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 |
| IEC 60317-25 AMD 1-1997 | 特种绕组线规范 第25部分:200级聚酰胺-酰亚胺包敷聚酯或聚酯酰亚胺漆包圆铝线 修改1 | Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200; Amendment 1 |
| IEC 60317-25 Edition 2.2-1997 | 特种绕组线规范.第25部分:涂覆聚酰胺-酰亚胺的聚酯或聚酯酰亚胺漆包圆铝线.200级 | Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 |
| IEC 60317-25-1990 | 特种绕组线规范 第25部分:200级聚酰胺-酰亚胺包敷聚酯或聚酯酰亚胺漆包圆铝线 | Specifications for particular types of winding wires; part 25: polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 |
| IEC 60384-18-1-2007 | 电子设备用固定电容器.第18-1部分:空白详细规范.固体(MnO2)电解质表面安装的固定铝电解电容器.评定等级EZ | Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<(Index)2>) electrolyte - Assessment level EZ |
| IEC 60384-18-2-2007 | 电子设备用固定电容器.第18-2部分:空白详细规范.非固体电解质表面安装的铝电解固定电容器.评定等级EZ | Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ |
| IEC 60384-18-2007 | 电子设备用固定电容器.第18部分:分规范.固体(MnO2)和非固体电解质铝电解固定表面安装电容器 | Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<(Index)2>) and non-solid electrolyte |
| IEC 60384-25 Corrigendum 1-2006 | 电子设备用固定电容器.第25部分:分规范.采用导电聚合固体电解质的表面安装固定铝电解电容器 | Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Corrigendum 1 |
| IEC 60384-25-1-2006 | 电子设备用固定电容器.第25-1部分:空白详细规范.带传导聚合固体电解质的表面安装固定铝制电解电容器.评定级 | Fixed capacitors for use in electronic equipment - Part 25-1: Blank detail specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ |
| IEC 60384-25-2006 | 电子设备用固定电容器.第25部分:分规范.带传导聚合固体电解质的表面安装固定铝制电解电容器 | Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte |
| IEC 60384-4-1-2007 | 电子设备用固定电容器.第4-1部分:空白详细规范.非固体电解质的铝电解电容器.评定等级EZ | Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ |
| IEC 60384-4-2-2007 | 电子设备用固定电容器.第4-2部分:空白详细规范.固体(MnO2)电解质的铝电解电容器.评定等级EZ | Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO<(Index)2>) electrolyte - Assessment level EZ |
| IEC 60384-4-2007 | 电子设备用固定电容器.第4部分:分规范.固体(MnO2)和非固体电解质的铝电解电容器 | Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO<(Index)2>) and non-solid electrolyte |
| IEC 60889-1987 | 架空导线用硬拉铝线 | Hard-drawn aluminium wire for overhead line conductors. |
| IEC 61232-1993 | 电工用铝包钢线 | Aluminium-clad steel wires for electrical purposes |
| IEC 61545-1996 | 连接器件 任何材料的夹紧装置中的铝线和铝包夹紧装置中的铜线的连接器件 | Connecting devices - Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units |
| IEC 62004-2007 | 架空导线用耐热铝合金导线 | Thermal resistant aluminium alloy wire for overhead line conductor |
| IEC/TR2 61394-1997 | 架空线路 铝、铝合金及钢心导线用脂的特性 | Overhead lines - Characteristics of greases for aluminium, aluminium alloy and steel bare conductors |
| ISO 10042 Technical Corrigendum 1-2006 | 焊接.铝和铝合金的弧焊接头.缺陷质量分级.技术勘误1 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections; Technical Corrigendum 1 |
| ISO 10042-2005 | 焊接.铝和铝合金的弧焊接头.缺陷质量分级 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
| ISO 10049-1992 | 铝合金铸件 目视法评定针孔 | Aluminium alloy castings; visual method for assessing the porosity |
| ISO 10074-1994 | 铝和铝合金硬质阳极氧化膜规范 | Specification for hard anodic oxidation coatings on aluminium and its alloys |
| ISO 10081-1-2003 | 致密定型耐火制品的分类.第1部分:铝-硅酸盐产品 | Classification of dense shaped refractory products - Part 1: Alumina-silica |
| ISO 10136-4-1993 | 玻璃和玻璃器皿 萃取溶液的分析 第4部分:用分子吸收光谱法测定氧化铝 | Glass and glassware; analysis of extract solutions; part 4: determination of aluminium oxide by molecular absorption spectrometry |
| ISO 10142-1996 | 铝生产用碳素材料 煅烧焦 用实验室振动磨测定粒度稳定性 | Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of grain stability using a laboratory vibration mill |
| ISO 10143-1995 | 铝生产用碳素材料 电极用煅烧焦 颗粒电阻率的测定 | Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules |
| ISO 10213-1991 | 铝土矿石 总铁含量的测定 三氯化钛还原法 | Aluminium ores; determination of total iron content; titanium trichloride reduction method |
| ISO 10215-1992 | 阳极氧化铝和铝合金 阳极氧化膜图像清晰度的目视测定 图表比例尺法 | Anodized aluminium and aluminium alloys; visual determination of image clarity of anodic oxidation coatings; chart scale method |
| ISO 10216-1992 | 阳极氧化铝和铝合金 阳极氧化膜图像清晰度仪器测定 仪器法 | Anodized aluminium and aluminium alloys; instrumental determination of image clarity of anodic oxidation coatings; instrumental method |
| ISO 10226-1991 | 铝土矿石 取样偏差的检验方法 | Aluminium ores; experimental methods for checking the bias of sampling |
| ISO 10236-1995 | 铝生产用碳素材料 电极用生焦和煅烧焦 松(紧装)密度的测定 | Carbonaceous materials for the production of aluminium - Green coke and calcined coke for electrodes - Determination of bulk density (tapped) |
| ISO 10237-1997 | 铝生产用碳素材料 煅烧焦 残余氢含量的测定 | Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of residual-hydrogen content |
| ISO 10238-1999 | 铝生产用碳素材料 电极用沥青 仪器法测定硫含量 | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method |
| ISO 10277-1995 | 铝土矿石 取样精度的检验方法 | Aluminium ores - Experimental methods for checking the precision of sampling |
| ISO 10461 AMD 1-2006 | 储气瓶.无缝铝合金储气瓶.定期检验和试验 | Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing |
| ISO 10461-2005 | 储气瓶.无缝铝合金储气瓶.定期检验和试验 | Gas cylinders - Seamless aluminium-alloy gas cylinders - Periodic inspection and testing |
| ISO 10478-1994 | 石油产品 中间燃份油中的铝和硅的测定 感应耦合等离子发射和原子吸收光谱法 | Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods |
| ISO 105-X01-1993 | 纺织品 色牢度试验 第X01部分:耐碳化色牢度:氯化铝法 | Textiles; tests for colour fastness; part X01: colour fastness to carbonizing: aluminium chloride |
| ISO 10546-1993 | 化学转化膜 铝及铝合金上瓢洗和未瓢洗的铬酸盐转化膜 | Chemical conversion coatings; rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| ISO 10566-1994 | 水质 铝的测定 邻苯二酚紫光度法 | Water quality - Determination of aluminium - Spectrometric method using pyrocatechol violet |
| ISO 10985-2009 | 输液瓶和注射管用铝-塑合成盖.要求和试验方法 | Caps made of aluminium-plastics combinations for infusion bottles and injection vials - Requirements and test methods |
| ISO 11040-3-1993 | 带药注射器 第3部分:齿科局部麻醉药茼用铝盖 | Prefilled syringes; part 3: aluminium caps for dental local anaesthetic cartridges |
| ISO 11126-7 Technical Corrigendum 1-1999 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 技术勘误1 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide; Technical Corrigendum 1 |
| ISO 11126-7-1995 | 涂装油漆和有关产品前钢材预处理 喷射清理用非金属磨料的技术要求 第7部分:熔融氧化铝 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide |
| ISO 1118-1978 | 铝和铝合金 钛含量的测定 铬变酸分光光度法 | Aluminium and aluminium alloys; Determination of titanium; Spectrophotometric chromotropic acid method |
| ISO 11412-1998 | 铝生产用碳素材料 煅烧焦 水分测定 | Carbonaceous materials for the production of aluminium - Calcined coke - Determination of water content |
| ISO 115-2003 | 重熔用非铝合金锭.分类及成分 | Unalloyed aluminium ingots for remelting - Classification and composition |
| ISO 11678-1996 | 农业排灌设备 铝制灌溉管 | Agricultural irrigation equipment - Aluminium irrigation tubes |
| ISO 1169-2006 | 锌合金.铝含量的测定.滴定法 | Zinc alloys - Determination of aluminium content - Titrimetric method |
| ISO 11713-2000 | 铝生产用碳素材料 阴极碳块和焙烧阳极 室温下电阻率的测定 | Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature |
| ISO 11846-1995 | 金属与合金的腐蚀 溶解热处理铝合金的耐晶间腐蚀性的测定 | Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys |
| ISO 11881 Technical Corrigendum 1-1999 | 金属与合金的腐蚀 铝合金的剥落腐蚀试验 技术勘误1 | Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys; Technical Corrigendum 1 |
| ISO 11881-1999 | 金属与合金的腐蚀 铝合金的剥落腐蚀试验 | Corrosion of metals and alloys - Exfoliation corrosion testing of aluminium alloys |
| ISO 12020-1997 | 水质 铝的测定 原子吸收光谱法 | Water quality - Determination of aluminium - Atomic absorption spectrometric methods |
| ISO 12103-2-1997 | 道路车辆 用于滤清器评价的粉尘试验 第2部分:氧化铝试验粉尘 | Road vehicles - Test dust for filter evaluation - Part 2: Aluminium oxide test dust |
| ISO 12215-3-2002 | 小型船舶.船体结构和船材尺寸.第3部分:材料:钢,铝合金,木料及其它材料 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials |
| ISO 1232-1976 | 主要用于铝生产的氧化铝 二氧化硅含量的测定 钼蓝光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of silica content; Reduced molybdosilicate spectrophotometric method |
| ISO 1247 AMD 1-1982 | 色漆用铝颜料 修改1 | Aluminium pigments for paints; amendment 1 |
| ISO 1247-1974 | 色漆用铝颜料 | Aluminium pigments for paints |
| ISO 12977-1999 | 铝生产用碳素材料 电极用沥青 挥发分的测定 | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of volatile matter content |
| ISO 12979-1999 | 铝生产用碳素材料 电极用沥青 喹啉不溶物中C/H比的测定 | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction |
| ISO 12980-2000 | 铝生产用碳素材料 电极用生焦和煅烧焦 X射线荧光分析 | Carbonaceous materials used in the production of aluminium - Green coke and calcined coke for electrodes - Analysis using an X-ray fluorescence method |
| ISO 12981-1-2000 | 铝生产用碳素材料 煅烧焦 对二氧化碳反应性的测定 第1部分:失重法 | Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method |
| ISO 12982-1-2000 | 铝生产用碳素材料 煅烧焦 对空气反应性的测定 第1部分:灼烧温度法 | Carbonaceous materials used in the production of aluminium - Calcined coke; Determination of the reactivity to air - Part 1: Ignition temperature method |
| ISO 12984-2000 | 铝生产用碳素材料 煅烧焦 粒度分布的测定 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of particle size distribution |
| ISO 12985-1-2000 | 铝生产用碳素材料 焙烧阳极和阴极碳块 第1部分:用尺寸法测定表观密度 | Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 1: Determination of apparent density using a dimensions method |
| ISO 12985-2-2000 | 铝生产用碳素材料 焙烧阳极和阴极碳块 第2部分:用静流法测定表观密度和开口孔隙率 | Carbonaceous materials used in the production of aluminium - Baked anodes and cathode blocks - Part 2: Determination of apparent density and of open porosity using a hydrostatic method |
| ISO 12986-1-2000 | 铝生产用碳素材料 预焙阳极和阴极碳块 第1部分:用三点法测定抗弯强度/剪切强度 | Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by a three-point method |
| ISO 12986-2-2005 | 铝生产用碳素材料.预焙阳极和阴极碳块.第2部分:用四点法测定抗弯强度 | Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 2: Determination of flexural strength by the four-point method |
| ISO 12987-2004 | 铝制品用碳质材料.阳极、阴极块、侧壁砖和烤灌糊.使用比较法进行热传导性的测定 | Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method |
| ISO 12988-1-2000 | 铝生产用碳素材料 焙烧阳极 二氧化碳反应性的测定 第1部分:失重法 | Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 1: Loss in mass method |
| ISO 12988-2-2004 | 铝生产用碳素材料.焙烧阳极.二氧化碳反应性的测定.第2部分:热解重量分析法 | Carbonaceous materials used in the production of aluminium - Baked anodes - Determination of the reactivity to carbon dioxide - Part 2: Thermogravimetric method |
| ISO 12989-1-2000 | 铝生产用碳素材料 焙烧阳极和部碳块 空气反应性的测定 第1部分:失重法 | Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 1: Loss in mass method |
| ISO 12989-2-2004 | 铝生产用碳素材料.焙烧阳极和部碳块.空气反应性的测定.第2部分:热重分析法 | Carbonaceous materials used in the production of aluminium - Baked anodes and sidewall blocks - Determination of the reactivity to air - Part 2: Thermogravimetric method |
| ISO 13770-1997 | 铝合金气瓶 避免瓶颈和瓶肩裂纹的操作要求 | Aluminium alloy gas cylinders - Operational requirements for avoidance of neck and shoulder cracks |
| ISO 13805-1999 | 铝上釉瓷和搪瓷 在电解液作用下测定铝上瓷层附着力(剥落试验) | Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) |
| ISO 13919-2-2001 | 焊接 电子束和激光束焊接接头 缺陷质量等级指南 第2部分：铝及其可焊合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys |
| ISO 14420-2005 | 铝生产用碳质产品.焙烧阳极和成形碳产品.线性热膨胀系数的测定 | Carbonaceous products for the production of aluminium - Baked anodes and shaped carbon products - Determination of the coefficient of linear thermal expansion |
| ISO 14422-1999 | 铝生产用碳素材料 冷压糊料 取样方法 | Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Methods of sampling |
| ISO 14427-2004 | 铝生产用碳质材料.冷和微热捣实糊料.非烤试验样品的制备和压缩后表观密度的测定 | Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction |
| ISO 14428-2005 | 铝生产用碳素材料.冷和微温冲压浆料.烘烤时的膨胀/收缩 | Carbonaceous materials for the production of aluminium - Cold and tepid ramming pastes - Expansion/shrinkage during baking |
| ISO 14435-2005 | 铝生产用含碳材料.石油焦.用感应耦合等离子体原子发射光谱测定法测定痕量金属 | Carbonaceous materials for the production of aluminium - Petroleum coke - Determination of trace metals by inductively coupled plasma atomic emission spectrometry |
| ISO 14676-1997 | 粘合剂 铝表面处理工艺有效性的评估 用导向托辊法作湿剥离试验 | Adhesives - Evaluation of the effectiveness of surface treatment techniques for aluminium - Wet-peel test by floating-roller method |
| ISO 14713-1999 | 钢结构腐蚀防护 锌和铝镀层 指南 | Protection against corrosion of iron and steel in structures - Zinc and aluminium coatings - Guidelines |
| ISO 14788-2005 | 连续热浸镀锌(5%)铝合金涂层钢薄板 | Continuous hot-dip zinc-5% aluminium alloy coated steel sheet |
| ISO 15329-2006 | 金属和合金的腐蚀.热处理铝合金的粒间腐蚀易感性评价的阳极试验 | Corrosion of metals and alloys - Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys |
| ISO 15379-1-2004 | 铝生产用碳质材料.阴极块材料.第1部分:压力作用下由于钠渗透引起的膨胀的测定 | Carbonaceous materials for the production of aluminium - Cathode block materials - Part 1: Determination of the expansion due to sodium penetration with application of pressure |
| ISO 15379-2-2004 | 铝生产用碳质材料.阴极块材料.第2部分:无压力作用下由于钠渗透引起的膨胀的测定 | Carbonaceous materials for the production of aluminium - Cathode block materials - Part 2: Determination of the expansion due to sodium penetration without application of pressure |
| ISO 15546-2007 | 石油和天然气工业.铝合金钻杆 | Petroleum and natural gas industries - Aluminium alloy drill pipe |
| ISO 15547-2-2005 | 石油、石化和天然气工业.板式热交换器.第2部分:铜焊铝板热交换器 | Petroleum, petrochemical and natural gas industries - Plate-type heat exchangers - Part 2: Brazed aluminium plate-fin heat exchangers |
| ISO 15614-2 Technical Corrigendum 1-2005 | 金属材料焊接过程的规范和鉴定.焊接过程试验.第2部分:铝及其合金的电弧焊接.技术勘误1 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys; Technical Corrigendum 1 |
| ISO 15614-2-2005 | 金属材料焊接程序的规范和鉴定.焊接过程试验.第2部分:铝和铝合金电弧焊 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys |
| ISO 15614-4 Technical Corrigendum 1-2007 | 金属材料焊接过程的规范和鉴定.焊接过程试验.第4部分:铝铸件的精工焊接.技术勘误1 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings; Technical Corrigendum 1 |
| ISO 15614-4-2005 | 金属材料焊接过程的规范和鉴定.焊接过程试验.第4部分:铝铸件的精工焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings |
| ISO 15906-2007 | 铝生产用碳质材料.焙烧阳极.空气渗透率测定 | Carbonaceous materials for the production of aluminium - Baked anodes - Determination of the air permeability |
| ISO 1617-1976 | 主要用于铝生产的氧化铝 钠含量的测定 火焰发射分光光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of sodium content; Flame emission spectrophotometric method |
| ISO 1618-1976 | 主要用于铝生产的氧化铝 钒含量的测定 N-苯甲酰-N-苯胲光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of vanadium content; N-Benzoyl-N-phenylhydroxylamine photometric method |
| ISO 16962-2005 | 表面化学分析.用辉光放电光发射光谱测定法分析锌和/或铝基金属涂层 | Surface chemical analysis - Analysis of zinc- and/or aluminium-based metallic coatings by glow-discharge optical-emission spectrometry |
| ISO 17499-2006 | 铝生产用碳质材料.用等效温度表示的烘烤等级的测定 | Carbonaceous materials used in the production of aluminium - Determination of baking level expressed by equivalent temperature |
| ISO 17500-2006 | 原铝生产用氧化铝.磨损指数的测定 | Aluminium oxide used for the production of primary aluminium - Determination of attrition index |
| ISO 17544-2004 | 铝生产用碳质材料.冷和微热捣实糊料.非烤糊料的可压实性测定 | Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Determination of rammability of unbaked pastes |
| ISO 17615 Technical Corrigendum 1-2008 | 铝和铝合金.再熔炼用合金铸锭.规范.技术勘误1 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications; Technical Corrigendum 1 |
| ISO 17615-2007 | 铝和铝合金.重熔用合金铸锭.规范 | Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications |
| ISO 1784-1976 | 铝合金 锌含量的测定 EDTA滴定法 | Aluminium alloys; Determination of zinc; EDTA titrimetric method |
| ISO 17925-2004 | 钢上锌和/或铝基涂层.单位面积涂层质量和化学组分的测定.重量分析法、感应耦合等离子体原子辐射光谱测定法 | Zinc and/or aluminium based coatings on steel - Determination of coating mass per unit area and chemical composition - Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry |
| ISO 18273-2004 | 焊接消耗品.铝和铝合金焊接用焊丝电极、金属丝和棒材.分类 | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification |
| ISO 18515-2007 | 铝生产用含碳材料.阴极块和焙烧阳极.耐压强度的测定 | Carbonaceous materials for the production of aluminium - Cathode blocks and baked anodes - Determination of compressive strength |
| ISO 18594-2007 | 电阻点焊接、电阻凸焊和电阻缝隙焊接.测定铝和钢材料的跃迁电阻 | Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material |
| ISO 18595-2007 | 电阻焊接.铝和铝合金的点焊.可焊接性、焊接和测试 | Resistance welding - Spot welding of aluminium and aluminium alloys - Weldability, welding and testing |
| ISO 1965-1973 | 航空器铝电缆的铝压接端子 | Aluminium terminal ends for crimping to aircraft aluminium electrical cables |
| ISO 20202-2004 | 铝生产用碳质材料.冷和微热捣实材料.烘烤试样的制备和烘烤时损失的测定 | Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking |
| ISO 20203-2005 | 铝生产中使用的碳素材料.煅烧焦炭.用X-射线衍射法测定煅烧石油焦的晶体粒度 | Carbonaceous materials used in the production of aluminium - Calcined coke - Determination of crystallite size of calcined petroleum coke by X-ray diffraction |
| ISO 2063-2005 | 热喷镀.金属涂层和其他无机覆层.锌、铝及其合金 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys |
| ISO 2069-1976 | 主要用于铝生产的氧化铝 钙含量的测定 火焰原子吸收法 | Aluminium oxide primarily used for the production of aluminium; Determination of calcium content; Flame atomic absorption method |
| ISO 2070-1997 | 主要用于铝生产的氧化铝 钙含量的测定 | Aluminium oxide primarily used for the production of aluminium - Determination of calcium content |
| ISO 20703-2006 | 气瓶.可再充装的焊接铝合金气瓶.设计、结构和试验 | Gas cylinders - Refillable welded aluminium-alloy cylinders - Design, construction and testing |
| ISO 2071-1976 | 主要用于铝生产的氧化铝 锌含量的测定 火焰原子吸收法 | Aluminium oxide primarily used for the production of aluminium; Determination of zinc content; Flame atomic absorption method |
| ISO 2072-1981 | 主要用于铝生产的氧化铝 锌含量的测定 PAN光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of zinc content; PAN photometric method |
| ISO 2073-1976 | 主要用于铝生产的氧化铝 分析用溶液的制备 加压下的盐酸反应法 | Aluminium oxide primarily used for the production of aluminium; Preparation of solution for analysis; Method by hydrochloric acid attack under pressure |
| ISO 2085-1976 | 铝和铝合金的阳极氧化 阳极氧化膜的连续性检验 硫酸铜试验 | Anodizing of aluminium and its alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test |
| ISO 209-2007 | 铝和铝合金.化学成分 | Aluminium and aluminium alloys - Chemical composition |
| ISO 2106 AMD 1-1983 | 铝和铝合金的阳极氧化 阳极氧化膜单位面积质量(表面密度)的测定 重量法 修改1 | Anodizing of aluminium and its alloys; determination of surface density of anodic oxide coatings; gravimetric method; amendment 1 |
| ISO 2106-1982 | 铝和铝合金的阳极氧化 阳极氧化膜单位面积质量(表面密度)的测定 重量法 | Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method |
| ISO 2107-2007 | 铝和铝合金.锻造制品.回火号 | Aluminium and aluminium alloys - Wrought products - Temper designations |
| ISO 21079-1-2008 | 包含氧化铝、氧化锆和硅石的耐火材料的化学分析.包含5%～45%ZrO<指数2>的耐火材料(可选择X射线荧光法).第1 | Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents and dissolution |
| ISO 21079-2-2008 | 包含氧化铝、氧化锆和硅石的耐火材料的化学分析.包含5%～45%ZrO<指数2>的耐火材料(可选择X射线荧光法).第2 | Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis |
| ISO 21079-3-2008 | 包含氧化铝、氧化锆和硅石的耐火材料用化学分析.包含5%～45%ZrO<指数2>的耐火材料(可选择X射线荧光法).第3 | Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES) |
| ISO 2128-1976 | 铝和铝合金的阳极氧化 阳极氧化膜厚度的测定 分光束显微镜无损测定法 | Anodizing of aluminium and its alloys; Determination of thickness of anodic oxide coatings; Non-destructive measurement by split-beam microscope |
| ISO 2135-1984 | 铝和铝合金的阳极氧化 用人工灯测定着色阳极氧化膜耐光性的加速耐候试验 | Anodizing of aluminium and its alloys; Accelerated test of light fastness of coloured anodic oxide coatings using artificial light |
| ISO 2143-1981 | 铝和铝合金的阳极氧化 封孔后的阳极氧化膜吸收能力损失的评估 酸处理后的染斑试验 | Anodizing of aluminium and its alloys; Estimation of loss of absorptive power of anodic oxide coatings after sealing; Dye spot test with prior acid treatment |
| ISO 21587-1-2007 | 硅酸铝耐火材料的化学分析(可选择X射线荧光法).第1部分:仪器、试剂、硅石的分解和重量测定 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 1: Apparatus, reagents, dissolution and gravimetric silica |
| ISO 21587-2-2007 | 硅酸铝耐火材料的化学分析(可选择X射线荧光法).第2部分:湿化学分析 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis |
| ISO 21587-3-2007 | 硅酸铝耐火材料的化学分析(可选择X射线荧光法).第3部分:感应耦合等离子体和原子吸收光谱测量法 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) - Part 3: Inductively coupled plasma and atomic absorption spectrometry methods |
| ISO 21687-2007 | 铝生产用含碳材料.以氮作为分析气体用比重测量法(测定体积的)测定密度.固体材料 | Carbonaceous materials used in the production of aluminium - Determination of density by gas pyknometry (volumetric) using helium as the analysis gas - Solid materials |
| ISO 22779-2006 | 金属涂层.铝的物理蒸汽沉积涂层法.规范和试验方法 | Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods |
| ISO 2297-1973 | 铝和铝合金的化学分析 镁的络合滴定法测定 | Chemical analysis of aluminium and its alloys; Complexometric determination of magnesium |
| ISO 23202-2006 | 铝制产品用氧化铝.经过一个20微米孔隙筛的粒子的测定 | Aluminium oxide used for the production of aluminium - Determination of particles passing a 20 micrometre aperture sieve |
| ISO 2367-1972 | 天然和人造冰晶石 铝含量的测定 8-羟基喹啉重量法 | Cryolite (natural and artificial); Determination of aluminium content; 8- Hydroxyquinoline gravimetric method |
| ISO 2376-1972 | 铝和铝合金的阳极氧化 绝缘性能的击穿电势检查法 | Anodization (anodic oxidation) of aluminium and its alloys; Insulation check by measurement of breakdown potential |
| ISO 2378-1972 | 铝合金冷硬铸件 参比试棒 | Aluminium alloy chill castings; Reference test bar |
| ISO 2379-1972 | 铝合金砂模铸件 参比试棒 | Aluminium alloy sand castings; Reference test bar |
| ISO 2828-1973 | 主要用于铝生产的氧化铝 氟含量的测定 茜素配位酮和氯化镧分光光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of fluorine content; Alizarin complexone and lanthanum chloride spectrophotometric method |
| ISO 2829-1973 | 主要用于铝生产的氧化铝 磷含量的测定 还原磷钼酸盐分光光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of phosphorus content; Reduced phosphomolybdate spectrophotometric method |
| ISO 2830-1973 | 天然和人造冰晶石 铝含量的测定 原子吸收法 | Cryolite, natural and artificial; Determination of aluminium content; Atomic absorption method |
| ISO 2865 Technical Corrigendum 1-1991 | 主要用于铝生产的氧化铝 硼含量的测定 姜黄素分光光度法 技术勘误1 | Aluminium oxide primarily used for the production of aluminium; determination of boron content; curcumin spectrophotometric method; technical corrigendum 1 |
| ISO 2865-1973 | 主要用于铝生产的氧化铝 硼含量的测定 姜黄素分光光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of boron content; Curcumin spectrophotometric method |
| ISO 2926-2005 | 主要用于铝生产的氧化铝.45 μm至150 μm范围内的粒度分析.电刻筛分法 | Aluminium oxide used for the production of primary aluminium - Particle size analysis for the range 45 μm to 150 μm - Method using electroformed sieves |
| ISO 2927-1973 | 主要用于铝生产的氧化铝 取样 | Aluminium oxide primarily used for the production of aluminium; Sampling |
| ISO 2931-1983 | 铝和铝合金的阳极氧化 用导纳或阻抗测量法评定阳极氧化膜的封孔质量 | Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance |
| ISO 2961-1974 | 主要用于铝生产的氧化铝 吸附指数的测定 | Aluminium oxide primarily used for the production of aluminium; Determination of an adsorption index |
| ISO 3110-1975 | 铜合金 合金元素铝含量的测定 容量法 | Copper alloys; Determination of aluminium as alloying element; Volumetric method |
| ISO 3210-1983 | 铝和铝合金的阳极氧化 磷-铬酸法评定阳极氧化膜的封孔质量 | Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution |
| ISO 3211-1977 | 铝和铝合金的阳极氧化 阳极氧化膜抗变形破裂性的评定 | Anodizing of aluminium and its alloys; Assessment of resistance of anodic oxide coatings to cracking by deformation |
| ISO 3255-1974 | 镁和镁合金 铝含量的测定 铬天青S光度法 | Magnesium and magnesium alloys; Determination of aluminium; Chromazurol S photometric method |
| ISO 3256-1977 | 铝和铝合金 镁含量的测定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of magnesium; Atomic absorption spectrophotometric method |
| ISO 3262-16-2000 | 涂料用填充剂 规范和试验方法 第16部分:氢氧化铝 | Extenders for paints - Specifications and methods of test - Part 16: Aluminium hydroxides |
| ISO 3262-18-2000 | 涂料用填充剂 规范和试验方法 第18部分:沉淀硅铝酸钠 | Extenders for paints - Specifications and methods of test - Part 18: Precipitated sodium aluminium silicate |
| ISO 3390-1976 | 主要用于铝生产的氧化铝 锰含量的测定 火焰原子吸收法 | Aluminium oxide primarily used for the production of aluminium; Determination of manganese content; Flame atomic absorption method |
| ISO 3393-1976 | 工业用天然及人造冰晶石和氟化铝 含水量的测定 重量法 | Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of moisture content; Gravimetric method |
| ISO 3429-1976 | 主要用于铝生产的氟化钠 铁含量的测定 1,10-菲罗啉光度法 | Sodium fluoride primarily used for the production of aluminium; Determination of iron content; 1,10- Phenanthroline photometric method |
| ISO 3430-1976 | 主要用于铝生产的氟化钠 二氧化硅含量的测定 还原硅钼酸盐分光光度法 | Sodium fluoride primarily used for the production of aluminium; Determination of silica content; Reduced molybdosilicate spectrophotometric method |
| ISO 3431-1976 | 主要用于铝生产的氟化钠 可溶性硫酸盐含量的测定 浊度测定法 | Sodium fluoride primarily used for the production of aluminium; Determination of soluble sulphates content; Turbidimetric method |
| ISO 3566-1976 | 主要用于铝生产的氟化钠 氯化物含量的测定 浊度测定法 | Sodium fluoride primarily used for the production of aluminium; Determination of chlorides content; Turbidimetric method |
| ISO 3613-2000 | 锌、镉、铝锌合金和锌铝合金的铬酸盐转化膜 试验方法 | Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods |
| ISO 3620-1994 | 摄影.冲洗药品.十二水硫酸铝钾规范 | Photography - Processing chemicals - Specifications for aluminium potassium sulfate |
| ISO 3978-1976 | 铝和铝合金 铬含量的测定 萃取二苯卡巴肼分光光度法 | Aluminium and aluminium alloys; Determination of chromium; Spectrophotometric method using diphenylcarbazide, after extraction |
| ISO 3979-1977 | 铝和铝合金 镍含量的测定 丁二酮肟分光光度法 | Aluminium and aluminium alloys; Determination of nickel; Spectrophotometric method using dimethylglyoxime |
| ISO 3980-1977 | 铝和铝合金 铜含量的测定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of copper; Atomic absorption spectrophotometric method |
| ISO 3981-1977 | 铝和铝合金 镍含量的测定 原子吸收分光光度法 | Aluminium and aluminium alloys; Determination of nickel; Atomic absorption spectrophotometric method |
| ISO 4139-1979 | 硅铁合金 铝含量的测定 火焰原子吸收光谱法 | Ferrosilicon; determination of aluminium content; Flame atomic absorption spectrometric method |
| ISO 4192-1981 | 铝和铝合金 铅含量的测定 火焰原子吸收光谱法 | Aluminium and aluminium alloys; Determination of lead content; Flame atomic absorption spectrometric method |
| ISO 4193-1981 | 铝和铝合金 铬含量的测定 火焰原子吸收光谱法 | Aluminium and aluminium alloys; Determination of chromium content; Flame atomic absorption spectrometric method |
| ISO 4280-1977 | 工业用天然及人造冰晶石和氟化铝 硫酸盐含量的测定 硫酸钡重量法 | Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of sulphate content; Barium sulphate gravimetric method |
| ISO 4295-1988 | 锰矿石和锰精矿 铝含量的测定 光度法和重量法 | Manganese ores and concentrates; determination of aluminium content; photometric and gravimetric methods |
| ISO 4623-2 Technical Corrigendum 1-2005 | 色漆和清漆.耐丝状腐蚀的测定.第2部分:铝基质.技术勘误1 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates; Technical Corrigendum 1 |
| ISO 4623-2-2003 | 色漆和清漆.耐丝状腐蚀的测定.第2部分:铝基质 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates |
| ISO 4688-1-2006 | 铁矿石.铝的测定.第1部分:火焰原子吸收光谱法 | Iron ores - Determination of aluminium - Part 1: Flame atomic absorption spectrometric method |
| ISO 5000-2005 | 商品级及拉伸级连续热浸镀铝-硅冷轧碳素钢薄板 | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 5193-1981 | 加工铝和铝合金 拉制圆棒材 尺寸和形位(直径采用对称正负偏差)偏差 | Wrought aluminium and aluminium alloys; Drawn round bars; Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter) |
| ISO 5194-1981 | 铝和铝合金 锌含量的测定 火焰原子吸收光谱法 | Aluminium and aluminium alloys; Determination of zinc content; Flame atomic absorption spectrometric method |
| ISO 5832-11-1994 | 外科植入物.金属材料.第11部分:锻造钛6铝7铌合金 | Implants for surgery - Metallic materials - Part 11: Wrought titanium 6-aluminium 7-niobium alloy |
| ISO 5832-14-2007 | 外科植入物.金属材料.第14部分:锻造钛15-钼5-锆3-铝合金 | Implants for surgery - Metallic materials - Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy |
| ISO 5832-3-1996 | 外科植入物.金属材料.第3部分:锻造钛6铝4钒合金 | Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy |
| ISO 5889-1983 | 锰矿石和锰精矿 铝、铜、铅和锌含量的测定 火焰原子吸收光谱法 | Manganese ores and concentrates; Determination of aluminium, copper, lead and zinc contents; Flame atomic absorption spectrometric method |
| ISO 5930-1979 | 工业用天然及人造冰晶石和氟化铝 磷含量的测定 还原磷钼酸盐光度法 | Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of phosphorus content; Reduced molybdophosphate photometric method |
| ISO 5931-2000 | 铝生产用碳素材料 煅烧焦和煅烧碳产品 用艾氏卡法测定全硫含量 | Carbonaceous materials used in the production of aluminium - Calcined coke and calcined carbon products - Determination of total sulfur by the Eschka method |
| ISO 5938-1979 | 工业用天然及人造冰晶石和氟化铝 硫含量的测定 X射线荧光光谱法 | Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of sulphur content; X-ray fluorescence spectrometric method |
| ISO 5939-1980 | 铝生产用碳素材料 电极用沥青 水含量的测定 共沸蒸馏(Dean and Stark)法 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of water content; Azeotropic distillation (Dean and Stark) method |
| ISO 5940-1981 | 铝生产用碳素材料 电极用沥青 用环和球法测定软化点 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method |
| ISO 5940-2-2007 | 铝生产用碳素材料.电极用沥青.第2部分:软化点的测定(梅特勒软化点法) | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Part 2: Determination of the softening point (Mettler softening point method) |
| ISO 6138-1991 | 铝土矿石 成分不均匀性的试验测定 | Aluminium ores; experimental determination of the heterogeneity of constitution |
| ISO 6139-1993 | 铝土矿石 分配器的均匀分配的实验室测定 | Aluminium ores; experimental determination of the heterogeneity of distribution of a lot |
| ISO 6140-1991 | 铝土矿石 样品的制备 | Aluminium ores; preparation of samples |
| ISO 6257-2002 | 铝生产用碳素材料.电极用沥青.取样 | Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling |
| ISO 6279-2006 | 滑动轴承.固体轴承用铝合金 | Plain bearings - Aluminium alloys for solid bearings |
| ISO 6361-1-1986 | 加工铝和铝合金薄板、带、厚板 第1部分:交货和验收的技术条件 | Wrought aluminium and aluminium alloy sheets, strips and plates; Part 1 : Technical conditions for inspection and delivery |
| ISO 6361-2-1990 | 加工铝和铝合金薄板、带、厚板 第2部分:力学性能 | Wrought aluminium and aluminium alloy sheets, strips and plates; part 2: mechanical properties |
| ISO 6361-3-1985 | 加工铝和铝合金薄板、带、厚板 第3部分:带材 尺寸和形状公差 | Wrought aluminium and aluminium alloy sheets, strips and plates; Part 3 : Strips; Tolerances on shape and dimensions (Previously referenced DIS 8219) |
| ISO 6361-4-1988 | 加工铝和铝合金薄板、带、厚板 第4部分:薄板和厚板 尺寸和形状公差 | Wrought aluminium and aluminium alloy sheets, strips and plates; part 4: sheets and plates; tolerances on shape and dimensions |
| ISO 6362-1-1986 | 加工铝和铝合金挤压棒/条材、管材和型材 第1部分:验收和交货的技术条件 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; Part 1 : Technical conditions for inspection and delivery |
| ISO 6362-2-1990 | 加工铝和铝合金挤压棒/条材、管材和型材 第2部分:力学性能 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 2: mechanical properties |
| ISO 6362-3-2001 | 加工铝和铝合金挤压棒/条材、管材和型材 第3部分：挤压矩形棒材 形状和尺寸公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 3: Extruded rectangular bars; Tolerances on shape and dimensions |
| ISO 6362-4-1988 | 加工铝和铝合金挤压棒/条材、管材和型材 第4部分:挤压型材 尺寸和形状公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles; part 4: extruded profiles; tolerances on shape and dimensions |
| ISO 6362-5-2001 | 加工铝和铝合金挤压棒/条材、管材和型材 第5部分:挤压圆形、正方形和六角形棒材 尺寸和形状公差 | Wrought aluminium and aluminium alloy extruded rods/bars, tubes and profiles - Part 5: Extruded round, square and hexagonal bars; Tolerances on shape and dimensions |
| ISO 6363-1-1988 | 加工铝和铝合金冷拉棒/条材和管材 第1部分:验收及交货的技术条件 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 1: technical conditions for inspection and delivery |
| ISO 6363-2-1993 | 加工铝和铝合金冷拉棒/条材和管材 第2部分:力学性能 | Wrought aluminium and aluminium alloy; cold-drawn rods/bars and tubes; part 2: mechanical properties |
| ISO 6363-4-1991 | 加工铝和铝合金冷拉棒/条材和管材 第4部分:拉制矩形棒材 尺寸和形状公差 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 4: drawn rectangular bars; tolerances on form and dimensions |
| ISO 6363-5-1992 | 加工铝和铝合金冷拉棒/条材和管材 第5部分:冷拉方形和六角形棒材 尺寸和形状公差 | Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes; part 5: drawn square and hexagonal bars; tolerances on form and dimensions |
| ISO 6365-1-1988 | 加工铝和铝合金冷拉线材 第1部分:验收及交货的技术条件 | Wrought aluminium and aluminium alloy cold-drawn wire; part 1: technical conditions for inspection and delivery |
| ISO 6374-1981 | 工业用天然及人造冰晶石和氟化铝 磷含量的测定 萃取后原子吸收光谱法 | Cryolite, natural and artificial, and aluminium fluoride for industrial use; Determination of phosphorus content; Atomic absorption spectrometric method after extraction |
| ISO 6375-1980 | 铝生产用碳素材料 电极用焦 取样 | Carbonaceous materials for the production of aluminium; Cokes for electrodes; Sampling |
| ISO 6376-1980 | 铝生产用碳素材料 电极用沥青 甲苯不溶物含量的测定 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of content of toluene-insoluble material |
| ISO 6474-1994 | 外科植入物.高纯氧化铝陶瓷材料 | Implants for surgery; ceramic materials based on high purity alumina |
| ISO 6581-1980 | 铝和铝合金的阳极氧化 着色阳极氧化膜耐紫外光的测定 | Anodizing of aluminium and its alloys; Determination of the fastness to ultra-violet light of coloured anodic oxide coatings |
| ISO 6606-1986 | 铝土矿石 在1075℃下质量损失的测定 重量法 | Aluminium ores; Determination of loss of mass at 1 075 degrees C; Gravimetric method |
| ISO 6607-1985 | 铝土矿石 总硅含量的测定 重量和分光光度联合法 | Aluminium ores; Determination of total silicon content; Combined gravimetric and spectrophotometric method |
| ISO 6609-1985 | 铝土矿石 铁含量的测定 滴定法 | Aluminium ores; Determination of iron content; Titrimetric method |
| ISO 6719-1986 | 阳极氧化铝和铝合金 用积分球仪法测量铝表面的反射特性 | Anodized aluminium and aluminium alloys; Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| ISO 6791-1981 | 铝生产用碳素材料 电极用沥青 喹啉不溶物含量的测定 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of contents of quinoline-insoluble material |
| ISO 6827-1981 | 铝和铝合金 钛含量的测定 二安替吡啉甲烷光度法 | Aluminium and aluminium alloys; Determination of titanium content; Diantipyrylmethane photometric method |
| ISO 6830-1986 | 铁矿石 铝含量的测定 EDTA滴定法 | Iron ores; Determination of aluminium content; EDTA titrimetric method |
| ISO 6994-1986 | 铝土矿石 铝含量的测定 EDTA滴定法 | Aluminium ores; Determination of aluminium content; EDTA titrimetric method |
| ISO 6995-1985 | 铝土矿石 钛含量的测定 4,4'-二安替吡啉甲烷分光光度法 | Aluminium ores; Determination of titanium content; 4,4'-Diantipyrylmethane spectrophotometric method |
| ISO 6997-1985 | 铝生产用碳素材料 煅烧焦 表观油含量的测定 加热法 | Carbonaceous materials for the production of aluminium; Calcined coke; Determination of apparent oil content ; Heating method |
| ISO 6998 Technical Corrigendum 1-1999 | 铝生产用碳素材料 电极用沥青 焦化值的测定 技术勘误1 | Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value; Technical Corrigendum 1 |
| ISO 6998-1997 | 铝生产用碳素材料 电极用沥青 焦化值的测定 | Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value |
| ISO 6999-1983 | 铝生产用碳素材料 电极用沥青 密度的测定 比重瓶法 | Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method |
| ISO 7061-1993 | 造船 海船用铝质舷梯 | Shipbuilding; aluminium shore gangways for seagoing vessels |
| ISO 7271-1982 | 铝和铝合金 箔材和薄带材 尺寸公差 | Aluminium and aluminium alloys; Foil and thin strip; Dimensional tolerances |
| ISO 7273-1981 | 锻铝和铝合金.挤压圆型材.形状和尺寸公差 | Wrought aluminium and aluminium alloys; Extruded round bars; Tolerances on shape and dimensions |
| ISO 7274-1981 | 加工铝和铝合金 冷拉圆棒材 尺寸和形状公差(直径采用负公差) | Wrought aluminium and aluminium alloys - Drawn round bars - Tolerances on shape and dimensions (All minus tolerances on diameter) |
| ISO 7530-7-1992 | 镍合金 火焰原子吸收光谱法 第7部分:铝含量测定 | Nickel alloys; flame atomic absorption spectrometric analysis; part 7: determination of aluminium content |
| ISO 7583-1986 | 铝和铝合金的阳极氧化 术语 三种语言版 | Anodizing of aluminium and its alloys; Vocabulary Trilingual edition |
| ISO 7599-1983 | 铝和铝合金的阳极氧化 铝的阳极氧化膜一般规范 | Anodizing of aluminium and its alloys; General specifications for anodic oxide coatings on aluminium |
| ISO 7668-1986 | 阳极氧化铝和铝合金.20°、45°、60°或85°角的镜面反射率和镜面光泽的测量 | Anodized aluminium and aluminium alloys; measurement of specular reflectance and specular gloss at angles of 20°, 45°, 60° or 85° |
| ISO 7722-1985 | 重力铸造、砂型铸造、冷硬铸造或由有关工艺生产的铝合金铸件 验收和交货的一般条件 | Aluminium alloy castings produced by gravity, sand, or chill casting, or by related processes; General conditions for inspection and delivery |
| ISO 7759-1983 | 铝和铝合金的阳极氧化 用遮光角度仪或角度仪测量铝表面的反射特性 | Anodizing of aluminium and its alloys; Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer |
| ISO 7866-1999 | 气瓶 可重复充装的铝合金无缝气瓶 设计、结构和试验 | Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing |
| ISO 791-1973 | 镁合金 铝含量的测定 8-羟基喹啉重量法 | Magnesium alloys; Determination of aluminium; 8-hydroxyquinoline gravimetric method |
| ISO 793-1973 | 铝和铝合金 铁含量的测定 邻菲啰啉光度法 | Aluminium and aluminium alloys; Determination of iron; Orthophenanthroline photometric method |
| ISO 795-1976 | 铝和铝合金 铜含量的测定 草酰二酰肼光度法 | Aluminium and aluminium alloys; Determination of copper content; Oxalyldihydrazide photometric method |
| ISO 796-1973 | 铝合金 铜含量的测定 电解法 | Aluminium alloys; Determination of copper; Electrolytic method |
| ISO 797-1973 | 铝和铝合金 硅含量的测定 重量法 | Aluminium and aluminium alloys; Determination of silicon; Gravimetric method |
| ISO 8003-1985 | 铝生产用碳素材料 电极用沥青 动态粘度的测定 | Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Measurement of dynamic viscosity |
| ISO 8004-1985 | 铝生产用碳素材料 煅烧焦和煅烧碳产品 二甲苯密度的测定 比重瓶法 | Carbonaceous materials for the production of aluminium; Calcined coke and calcined carbon products; Determination of the density in xylene; Pyknometric method |
| ISO 8005-2005 | 铝生产用碳素材料.生焦炭和煅烧焦炭.灰分含量的测定 | Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content |
| ISO 8006-1985 | 铝生产用碳素材料 电极用沥青 灰分的测定 | Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Determination of ash |
| ISO 8007-1-1999 | 铝生产用碳素材料 单个材料的取样方案和取样 第1部分:阴极块 | Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 1: Cathode blocks |
| ISO 8007-2-1999 | 铝生产用碳素材料 单个材料的取样方案和取样 第2部分:预焙阳极 | Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 2: Prebaked anodes |
| ISO 8007-3-2003 | 铝生产用碳素材料.单个材料的取样方案和取样.第3部分:侧墙砖 | Carbonaceous materials used in the production of aluminium - Sampling plans and sampling from individual units - Part 3: Sidewall blocks |
| ISO 8008-2005 | 主要用于铝生产的氧化铝.吸附氮的比表面面积的测定 | Aluminium oxide primarily used for the production of aluminium -- Determination of specific surface area by nitrogen adsorption |
| ISO 802-1976 | 主要用于铝生产的氧化铝 试样的制备和贮存 | Aluminium oxide primarily used for the production of aluminium; Preparation and storage of test samples |
| ISO 804-1976 | 主要用于铝生产的氧化铝 分析用溶液的制备 碱熔化法 | Aluminium oxide primarily used for the production of aluminium; Preparation of solution for analysis; Method by alkaline fusion |
| ISO 805-1976 | 主要用于铝生产的氧化铝 铁含量的测定 1,10-菲罗啉光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of iron content; 1,10- Phenanthroline photometric method |
| ISO 8056-1-1985 | 航空器 镍铬和镍铝热电偶的延伸电缆 第1部分:导线 一般要求和试验 | Aircraft; Nickel-chromium and nickel-aluminium thermocouple extension cables; Part 1 : Conductors; General requirements and tests |
| ISO 8056-2-1988 | 航空器 镍铬和镍铝热电偶的延伸电缆 第2部分:端头 一般要求和试验 | Aircraft; nickel-chromium and nickel-aluminium thermocouple extension cables; part 2: terminations; general requirements and tests |
| ISO 8056-3-1987 | 航空器 镍铬和镍铝热电偶的延伸电缆 第3部分:压接式环形端子 尺寸 | Aircraft; Nickel-chromium and nickel-aluminium thermocouple extension cables; Part 3 : Crimp-type ring terminal ends; Dimensions |
| ISO 8056-4-1987 | 航空器 镍铬和镍铝热电偶的延伸电缆 第4部分:压接式对接接头 尺寸 | Aircraft; Nickel-chromium and nickel-aluminium thermocouple extension cables; Part 4 : Crimp-type butt connectors; Dimensions |
| ISO 806-2004 | 主要用于铝生产的氧化铝.在300℃和1000℃时质量损失的测定 | Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300 °C and 1000 °C |
| ISO 8078-1984 | 航空航天工艺 铝合金的阳极化处理 无着色涂层的硫酸工艺规程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, undyed coating |
| ISO 8079-1984 | 航空航天工艺 铝合金的阳极化处理 带着色涂层的硫酸工艺规程 | Aerospace process; Anodic treatment of aluminium alloys; Sulfuric acid process, dyed coating |
| ISO 808-1973 | 铝和铝合金 硅含量的测定 钼蓝分光光度法 | Aluminium and aluminium alloys; Determination of silicon; Spectrophotometric method with the reduced silicomolybdic complex |
| ISO 8081-1985 | 航空航天工艺 铝合金的化学转化涂镀 一般用途 | Aerospace process; Chemical conversion coating for aluminium alloys; General purpose |
| ISO 8220-1986 | 主要用于铝生产的氧化铝 微晶粒(小于60毫微米筛目)大小分布的测定 电沉积筛分法 | Aluminium oxide primarily used for the production of aluminium; Determination of the fine particle size distribution (less than 60 mu/m); Method using electroformed sieves |
| ISO 8251-1987 | 阳极氧化铝和铝合金 用摩擦轮磨耗试验机测定阳极氧化膜磨性和耐磨系数 | Anodized aluminium and aluminium alloys; Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus |
| ISO 8252-1987 | 阳极氧化铝和铝合金 用喷砂摩擦试验仪测定阳极氧化膜的平均耐磨系数 | Anodized aluminium and aluminium alloys; Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus |
| ISO 8362-3-2001 | 注射容器及附件 第3部分：注射瓶铝盖 | Injection containers and accessories - Part 3: Aluminium caps for injection vials |
| ISO 8362-6-1992 | 注射剂用注射容器及附件 第6部分:铝塑组合注射瓶盖 | Injection containers for injectables and accessories; part 6: caps made of aluminium-plastics combinations for injection vials |
| ISO 8362-7-2006 | 注射容器及附件.第7部分:无凸缘铝塑组合注射瓶盖 | Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part |
| ISO 8536-3-1999 | 医用输液器具 第3部分:输液瓶铝盖 | Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles |
| ISO 8536-7-2009 | 医用输液设备.第7部分:输液瓶用铝和塑料复合物制帽盖 | Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles |
| ISO 8556-1986 | 铝土矿石 磷含量的测定 钼蓝分光光度测定法 | Aluminium ores; Determination of phosphorus content; Molybdenum blue spectrophotometric method |
| ISO 8557-1985 | 铝土矿石 分析试样中湿存水的测定 重量法 | Aluminium ores; Determination of hygroscopic moisture in analytical samples; Gravimetric method |
| ISO 8558-1985 | 铝土矿石 预干燥试样的制备 | Aluminiumn ores; Preparation of pre-dried test samples |
| ISO 8591-1-1989 | 航空航天 锻铝和铝合金 检验、试验和供货要求 第1部分:一般要求 | Aerospace; wrought aluminium and aluminium alloys; inspection, testing and supply requirements; part 1: general requirements |
| ISO 8658-1997 | 铝生产用碳素材料 未煅烧和煅烧焦 火焰原子吸收光谱法测定痕量元素 | Carbonaceous materials for use in the production of aluminium - Green and calcined coke - Determination of trace elements by flame atomic absorption spectroscopy |
| ISO 8685-1992 | 铝土矿石 取样方法 | Aluminium ores; sampling procedures |
| ISO 8723-1986 | 铝生产用碳素材料 煅烧焦 油含量的测定 溶剂萃取法 | Carbonaceous materials for the production of aluminium; Calcined coke; Determination of oil content; Method by solvent extraction |
| ISO 886-1973 | 铝和铝合金 锰含量的测定 光度法(锰含量为0.005～1.5%) | Aluminium and aluminium alloys; Determination of manganese; Photometric method (Manganese content between 0,005 and 1,5 %) |
| ISO 8872-2003 | 输血、输液和注射瓶铝盖－一般要求和试验方法 | Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods |
| ISO 8889-1988 | 铬矿石和铬精矿 铝含量的测量 络合法 | Chromium ores and concentrates; determination of aluminium content; complexometric method |
| ISO 8993-1989 | 阳极氧化铝和铝合金 点腐蚀法评定铝及铝合金阳极氧化膜 图表法 | Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; chart method |
| ISO 8994-1989 | 阳极氧化铝和铝合金 点腐蚀法评定铝及铝合金阳极氧化膜 网格法 | Anodized aluminium and aluminium alloys; rating system for the evaluation of pitting corrosion; grid method |
| ISO 900-1977 | 主要用于铝生产的氧化铝 钛含量的测定 二安替吡啉基代甲烷光度法 | Aluminium oxide primarily used for the production of aluminium; Determination of titanium content; Diantipyrylmethane photometric method |
| ISO 901-1976 | 主要用于铝生产的氧化铝 绝对密度的测定 比重瓶法 | Aluminium oxide primarily used for the production of aluminium; Determination of absolute density; Pyknometer method |
| ISO 902-1976 | 主要用于铝生产的氧化铝 休止角的测定 | Aluminium oxide primarily used for the production of aluminium; Measurement of the angle of repose |
| ISO 903-1976 | 主要用于铝生产的氧化铝 未夯实密度的测定 | Aluminium oxide primarily used for the production of aluminium; Determination of untamped density |
| ISO 9033-1989 | 铝土矿石 散装料水含量的测定 | Aluminium ores; determination of the moisture content of bulk material |
| ISO 9055-1988 | 铝生产用碳素材料 电极用沥青 用氧弹法测定硫含量 | Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method |
| ISO 9088-1997 | 铝生产用碳素材料 预焙阳极和阴极块 用比重瓶法测定二甲苯密度 | Carbonaceous materials used for the production of aluminium - Cathode blocks an prebacked anodes - Determination of the density in xylene by a pyknometric method |
| ISO 9208-1989 | 铝土矿石 钒含量的测定 苯甲酰苯基羟胺(BPHA)分光光度法 | Aluminium ores; determination of vanadium content; BPHA spectrophotometric method |
| ISO 9285-1997 | 磨料粒度 电熔氧化铝的化学分析 | Abrasive grains and crude - Chemical analysis of fused aluminium oxide |
| ISO 9364-2006 | 商品级、拉制成型级和结构级连续热镀铝/锌薄钢板质量 | Continuous hot-dip aluminium/zinc-coated steel sheet of commercial, drawing and structural qualities |
| ISO 9406-1995 | 铝生产用碳素材料 焦碳 用重量分析法测定挥发物的含量 | Carbonaceous materials for the production of aluminium - Green coke - Determination of volatile matter content by gravimetric analysis |
| ISO 9418-1998 | 航空航天 铝或铝合金实心铆钉 采购规范 | Aerospace - Rivets, solid, in aluminium or aluminium alloys - Procurement specification |
| ISO 9591-2004 | 铝合金的腐蚀.抗应力腐蚀裂纹的测定 | Corrosion of aluminium alloys - Determination of resistance to stress corrosion cracking |
| ISO 9606-2-2004 | 焊工的认可试验.熔焊.第2部分:铝和铝合金 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys |
| ISO 9658-1990 | 钢 铝含量的测定 火焰原子吸收光谱法 | Steel; determination of aluminium content; flame atomic absorption spectrometric method |
| ISO 9692-3-2000 | 焊接和相关工艺 接头制备的建议 第3部分:铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys |
| ISO 9915-1992 | 铝合金铸件 X射线照相试验 | Aluminium alloy castings; radiography testing |
| ISO 9916-1991 | 铝合金和镁合金铸件 液体渗透检验 | Aluminium alloy and magnesium alloy castings; liquid penetrant inspection |
| ISO/TR 11069 Technical Corrigendum 1-1996 | 铝结构 材料和设计 静态负荷下的极限状态 技术勘误1 | Aluminium structures - Material and design - Ultimate limit state under static loading; Technical Corrigendum 1 |
| ISO/TR 11069-1995 | 铝结构 材料和设计 静态负荷下的极限状态 | Aluminium structures - Material and design - Ultimate limit state under static loading |
| ISO/TR 11728-1993 | 阳极氧化铝和铝合金 使用循环的人工灯和污染空气测定着色阳极氧化膜色牢度的加速耐候试验 | Anodized aluminium and aluminium alloys; accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas |
| ISO/TR 17671-4-2002 | 焊接.金属材料焊接的推荐.第4部分:铝和铝合金的电弧焊接 | Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys |
| ISO/TR 22694-2008 | 气瓶.定期检验和测试时无缝钢和铝合金气瓶的裂纹用认可/拒绝的确定方法 | Gas cylinders - Methods for establishing acceptance/rejection criteria for flaws in seamless steel and aluminium alloy cylinders at time of periodic inspection and testing |
| ISO/TR 7242-1981 | 轻金属和铝合金的化学分析 实验室间的试验结果的统计分析 | Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials |
| ISO/TR 8125-1984 | 铝和铝合金的阳极氧化 着色阳极氧化膜的颜色和色差的测定 | Anodizing of aluminium and its alloys; Determination of colour and colour difference of coloured anodic coatings |
| ISO/TS 14423-1999 | 铝生产用碳素材料 冷压糊 通过喹啉萃取和测定聚焦体尺寸分布来测定有效粘接剂含量和聚焦体含量 | Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of effective binder content and aggregate content by extraction with quinoline, and determination of aggregate size distribution |
| ISO/TS 14425-1999 | 铝生产用碳素材料 冷压糊 未焙烧糊料的挥发物含量的测定 | Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes |
| 编号 | 中文名称 | 英文名称 |