| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DL 439-1991(2005) | 火力发电厂高温紧固件技术导则 | () |
| DL/T 439-2006 | 火力发电厂高温紧固件技术导则 | () |
| DL/T 764.1-2001 | 电力金具专用紧固件 六角头带销孔螺栓 | () |
| DL/T 764.2-2001 | 电力金具专用紧固件 闭口销 | () |
| GB/T 10431-2008 | 紧固件横向振动试验方法 | () |
| GB/T 11577-1989 | 船用集装箱紧固件 | Container securing fitting for ships |
| GB/T 1237-2000 | 紧固件标记方法 | Designation system for fasteners |
| GB/T 13682-1992 | 螺纹紧固件轴向载荷疲劳试验方法 | Axial load fatigue testing for threadedfasteners |
| GB/T 13806.1-1992 | 精密机械用紧固件十字槽螺钉 | Fasteners for fine mechanics--Cross recessed screws |
| GB/T 13806.2-1992 | 精密机械用紧固件十字槽自攻螺钉刮削端 | Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point |
| GB/T 152.1-1988 | 紧固件铆钉用通孔 | Fasteners--Clearance holes for rivets |
| GB/T 152.2-1988 | 紧固件沉头用沉孔 | Fasteners--Countersinks for countersunk head screws |
| GB/T 152.3-1988 | 紧固件圆柱头用沉孔 | Fasteners--Counterbores for hexagon socket head screws and slotted cheese head screws |
| GB/T 152.4-1988 | 紧固件六角头螺栓和六角螺母用沉孔 | Fasteners--Counterbores for hexagonbolts and nuts |
| GB/T 16823.1-1997 | 螺纹紧固件应力截面积和承载面积 | Stress area and bearing area for threaded fasteners |
| GB/T 16823.2-1997 | 螺纹紧固件紧固通则 | General rules of tightening for threaded fasteners |
| GB/T 16823.3-1997 | 螺纹紧固件拧紧试验方法 | Method of tightening test for threaded fasteners |
| GB/T 16938-2008 | 紧固件 螺栓、螺钉、螺柱和螺母 通用技术条件 | () |
| GB/T 18747.1-2002 | 厌氧胶粘剂扭矩强度的测定(螺纹紧固件) | The determination of torque strength of anaerobic adhesives (Threaded fasteners) |
| GB/T 2-2001 | 紧固件外螺纹零件的末端 | Fasteners--Ends of parts with external thread |
| GB/T 3098.1-2000 | 紧固件机械性能螺栓、螺钉和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs |
| GB/T 3098.10-1993 | 紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母 | Mechanical properties of fasteners--Bolts，screws，studs and nuts made of non-ferrous metals |
| GB/T 3098.11-2002 | 紧固件机械性能自钻自攻螺钉 | Mechanical properties of fasteners--Drilling screws with tapping screw thread |
| GB/T 3098.12-1996 | 紧固件机械性能螺母锥形保证载荷试验 | Mechanical properties of fasteners--Cone proof load test on nuts |
| GB/T 3098.13-1996 | 紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm | Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm |
| GB/T 3098.14-2000 | 紧固件机械性能螺母扩孔试验 | Mechanical properties of fasteners--Widening test on nuts |
| GB/T 3098.15-2000 | 紧固件机械性能不锈钢螺母 | Mechanical properties of fasteners--Nuts made of stainless-steel |
| GB/T 3098.16-2000 | 紧固件机械性能不锈钢紧定螺钉 | Mechanical properties of fasteners--Setscrews made of stainless-steel |
| GB/T 3098.17-2000 | 紧固件机械性能检查氢脆用预载荷试验平行支承面法 | Mechanical properties of fasteners--Preloading test for the detection of hydrogen embrittlement--Parallel bearing surface method |
| GB/T 3098.18-2004 | 紧固件机械性能盲铆钉试验方法 | Mechanical properties of fasteners--Blind rivets testing |
| GB/T 3098.19-2004 | 紧固件机械性能抽芯铆钉 | Mechanical properties of fasteners--Blind rivets with break pull mandrel |
| GB/T 3098.2-2000 | 紧固件机械性能螺母粗牙螺纹 | Mechanical properties of fasteners--Nuts--Coarse thread |
| GB/T 3098.20-2004 | 紧固件机械性能蝶形螺母保证扭矩 | Mechanical properties of fasteners--Wing nuts with specified proof torque |
| GB/T 3098.21-2008 | 紧固件机械性能 不锈钢自攻螺钉 | () |
| GB/T 3098.3-2000 | 紧固件机械性能紧定螺钉 | Mechanical properties of fasteners--Set screws |
| GB/T 3098.4-2000 | 紧固件机械性能螺母细牙螺纹 | Mechanical properties of fasteners--Nuts--Fine pitch thread |
| GB/T 3098.5-2000 | 紧固件机械性能自攻螺钉 | Mechanical properties of fasteners--Tapping screws |
| GB/T 3098.6-2000 | 紧固件机械性能不锈钢螺栓、螺钉和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs made of stainless-steel |
| GB/T 3098.7-2000 | 紧固件机械性能自挤螺钉 | Mechanical properties of fasteners--Thread rolling screws |
| GB/T 3098.8-1992 | 紧固件机械性能耐热用螺纹连接副 | Mechanical properties of fasteners--Components for bolted connections made mainly from materials with a high temperature strength |
| GB/T 3098.9-2002 | 紧固件机械性能有效力矩型钢六角锁紧螺母 | Mechanical properties of fasteners--Prevailing torque type steel hesagon nuts |
| GB/T 3099.1-2008 | 紧固件术语 螺纹紧固件、销及垫圈 | () |
| GB/T 3099.2-2004 | 紧固件术语盲铆钉 | Terminology of fasteners--Blind rivets |
| GB/T 3103.1-2002 | 紧固件公差螺栓、螺钉、螺柱和螺母 | Tolerances for fasteners--Bolts，screws，studs and nuts |
| GB/T 3103.2-1982 | 紧固件公差用于精密机械的螺栓、螺钉和螺母 | Tolerances for fasteners--Bolts，screws and nuts for fine mechanics |
| GB/T 3103.3-2000 | 紧固件公差平垫圈 | Tolerances for fasteners--Plain washers |
| GB/T 3103.4-1992 | 紧固件公差耐热用螺纹连接副 | Tolerances for fasteners--Components for bolted connections made mainly from materials with a high temperature strength |
| GB/T 3104-1982 | 紧固件六角产品的对边宽度 | Fasteners--Widths across flats of hexagon products |
| GB/T 4459.1-1995 | 机械制图螺纹及螺纹紧固件表示法 | Mechanical drawings--Representation of screw threads and threaded parts |
| GB/T 5267.1-2002 | 紧固件电镀层 | Fasteners--Electroplated coatings |
| GB/T 5267.2-2002 | 紧固件非电解锌片涂层 | Fasteners--Non-electrolytically applied zinc flake coatings |
| GB/T 5267.3-2008 | 紧固件 热浸镀锌层 | () |
| GB/T 5276-1985 | 紧固件螺栓、螺钉、螺柱及螺母尺寸代号和标注 | Fasteners--Bolts，screws，studs and nuts--Symbols and designations of dimensions |
| GB/T 5277-1985 | 紧固件螺栓和螺钉通孔 | Fasteners--Clearance holes for bolts and screws |
| GB/T 5278-1985 | 紧固件开口销孔和金属丝孔 | Fasteners--Split pin holes and wireholes |
| GB/T 5779.1-2000 | 紧固件表面缺陷螺栓、螺钉和螺柱一般要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements |
| GB/T 5779.2-2000 | 紧固件表面缺陷螺母 | Fasteners--Surface discontinuities--Nuts |
| GB/T 5779.3-2000 | 紧固件表面缺陷螺栓、螺钉和螺柱特殊要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for special requirements |
| GB/T 6189-1986 | 紧固件用六角花形E型 | Hexagon lobular for fasteners--Type E |
| GB/T 8446.3-2004 | 电力半导体器件用散热器第3部分:绝缘件和紧固件 | Heat sink for power semiconductor device--Part 3:Insulators and fasteners |
| GB/T 90.1-2002 | 紧固件验收检查 | Fasteners--Acceptance inspectiox |
| GB/T 90.2-2002 | 紧固件标志与包装 | Fasteners--Marking and packaging |
| GB/T 9125-2003 | 管法兰连接用紧固件 | Fasteners for pipe flange joints |
| HG 20613-1997 | 钢制管法兰用紧固件（欧洲体系） | () |
| HG 20614-1997 | 钢制管法兰、垫片、紧固件选配规定（欧洲体系） | () |
| HG 20634-1997 | 钢制管法兰用紧固件（美洲体系） | () |
| HG 20635-1998 | 钢制管法兰、垫片、紧固件选配规定（美洲体系） | () |
| JB/T 1308.2-1999 | 紧固件测试方法 尺寸与几何精度 木螺钉 | () |
| JB/T 2778-2008 | 阀门零部件 高压管件和紧固件温度标记 | () |
| JB/T 4213-1996 | 紧固件冷镦模具 技术条件 | () |
| JB/T 58652-1999 | 紧固件产品品种质量等级评定 | () |
| JB/T 7383-1994 | 紧固件 十字槽精冲模 | () |
| JB/T 7384.1-1994 | 紧固件 对角宽度止端检验模 | () |
| JB/T 7384.10-1994 | 紧固件 杆部销孔、头部销孔对称度、开槽螺母对称度及开口销孔垂直度检具 | () |
| JB/T 7384.11-1994 | 紧固件 螺母螺纹垂直规 | () |
| JB/T 7384.12-1994 | 紧固件 螺杆直线度检验模 | () |
| JB/T 7384.13-1994 | 紧固件 自攻锁紧螺钉外接圆直径量规 | () |
| JB/T 7384.14-1994 | 紧固件 木螺钉螺纹小径卡尺 | () |
| JB/T 7384.15-1994 | 紧固件 检测开口销两脚的间隙和错移量环规 | () |
| JB/T 7384.16-1994 | 紧固件 铆钉孔径塞规 | () |
| JB/T 7384.17-1994 | 紧固件 铆钉孔深塞规 | () |
| JB/T 7384.18-1994 | 紧固件 垫圈孔径量规 | () |
| JB/T 7384.2-1994 | 紧固件 沉头及半沉头部高度检验模 | () |
| JB/T 7384.3-1994 | 紧固件 头部高度及开槽与支承面间的厚度检验模 | () |
| JB/T 7384.4-1994 | 紧固件 扳拧高度检验模 | () |
| JB/T 7384.5-1994 | 紧固件 内六角量规 | () |
| JB/T 7384.6-1994 | 紧固件 内六角对角宽度通端量规 | () |
| JB/T 7384.7-1994 | 紧固件 开槽宽度塞规 | () |
| JB/T 7384.8-1994 | 紧固件 开槽深度塞规 | () |
| JB/T 7384.9-1994 | 紧固件 开槽螺母槽底与支承面间的厚度卡规 | () |
| JB/T 7912-1999 | 商品紧固件的普通螺纹选用系列 | () |
| JB/T 9149-1999 | 标准紧固件的重量 | () |
| JB/T 9151.1-1999 | 紧固件测试方法 尺寸与几何精度 螺栓、螺钉、螺柱和螺母 | () |
| JB/T 9151.3-1999 | 紧固件测试方法 尺寸与几何精度 自攻螺钉 | () |
| JB/T 9151.4-1999 | 紧固件测试方法 尺寸与几何精度 垫圈 | () |
| JB/T 9151.5-1999 | 紧固件测试方法 尺寸与几何精度 销 | () |
| JB/T 9151.6-1999 | 紧固件测试方法 尺寸与几何精度 铆钉 | () |
| JB/T 9151.7-1999 | 紧固件测试方法 尺寸与几何精度 挡圈 | () |
| MT/T 187.1-1988 | 刮板输送机紧固件 螺栓技术条件 | () |
| MT/T 187.10-1996 | 刮板输送机紧固件 E型螺栓 | () |
| MT/T 187.2-1988 | 刮板输送机紧固件 U型螺栓 | () |
| MT/T 187.3-1988 | 刮板输送机紧固件 棱头螺栓A型 | () |
| MT/T 187.4-1988 | 刮板输送机紧固件 棱头螺栓B型 | () |
| MT/T 187.5-1988 | 刮板输送机紧固件 长方头螺栓 | () |
| MT/T 187.6-1988 | 刮板输送机紧固件 梯形头螺栓 | () |
| MT/T 187.7-1988 | 刮板输送机紧固件 半圆头方颈螺栓 | () |
| MT/T 187.8-1991 | 刮板输送机紧固件 非金属嵌件六角锁紧螺母 | () |
| MT/T 913-2002 | 矿用液压螺母及其高强度紧固件尺寸系列和技术条件 | () |
| QC/T 518-2007 | 汽车用螺纹紧固件紧固扭矩 | Tightening torque for automotive threaded fasteners |
| QC/T 597-1999(2005) | 螺纹紧固件预涂微胶囊厌氧干膜胶 | () |
| 编号 | 中文名称 | 英文名称 |