| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ISO 10683-2000 | 紧固件 非电解锌粉覆盖层 | Fasteners - Non-electrolytically applied zinc flake coatings |
| ISO 10684-2004 | 紧固件.热浸镀锌涂层 | Fasteners - Hot dip galvanized coatings |
| ISO 10964-1993 | 粘合剂 螺纹紧固件上厌氧粘合剂的抗扭强度的测定 | Adhesives; determination of torque strength of anaerobic adhesives on threaded fasteners |
| ISO 1120-2002 | 输送机皮带.机械紧固件的强度测定.静态试验法 | Conveyor belts - Determination of strength of mechanical fastenings - Static test method |
| ISO 12777-1-1994 | 托盘连接件的试验方法 第1部分:托盘用钉子、其他榫钉型紧固件和U形钉的抗弯试验 | Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples |
| ISO 13584-511-2006 | 工业自动化系统和集成.零件库.第511部分:通用的机械系统和组件.紧固件参考词典 | Industrial automation systems and integration - Parts library - Part 511: Mechanical systems and components for general use - Reference dictionary for fasteners |
| ISO 15330-1999 | 紧固件 检查氢脆用预载荷试验 平行支承面法 | Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method |
| ISO 15629-2002 | 物料搬运托盘.新托盘组件和用过的木制平托盘检修用紧固件质量 | Pallets for material handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
| ISO 16047-2005 | 紧固件.扭矩/夹持力试验 | Fasteners - Torque/clamp force testing |
| ISO 16048-2003 | 耐腐蚀不锈钢紧固件的钝化 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 16426-2002 | 紧固件.质量保证体系 | Fasteners - Quality assurance system |
| ISO 16670-2003 | 木结构.机械紧固件接头.准静态逆循环试验方法 | Timber structures - Joints made with mechanical fasteners - Quasi-static reversed-cyclic test method |
| ISO 225-1983 | 紧固件 螺栓、螺钉、螺柱和螺母 尺寸代号和标注 三种语言版 | Fasteners; Bolts, screws, studs and nuts; Symbols and designations of dimensions Trilingual edition |
| ISO 272-1982 | 紧固件 六角产品 对边宽度 | Fasteners; Hexagon products; Widths across flats |
| ISO 273-1979 | 紧固件 螺栓和螺钉用通孔 | Fasteners; Clearance holes for bolts and screws |
| ISO 3269-2000 | 紧固件 验收检查 | Fasteners - Acceptance inspection |
| ISO 3506-1-1997 | 耐腐蚀不锈钢紧固件的机械性能 第1部分:螺栓、螺钉和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs |
| ISO 3506-2-1997 | 耐腐蚀不锈钢紧固件的机械性能 第2部分:螺母 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts |
| ISO 3506-3-1997 | 耐腐蚀不锈钢紧固件的机械性能 第3部分:紧定螺钉及类似的不受拉应力的螺纹紧固件 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress |
| ISO 3506-4-2003 | 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws |
| ISO 3508-1976 | 符合ISO 261 和ISO 262 螺纹的紧固件用螺纹收尾 | Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 |
| ISO 3800-1993 | 螺纹紧固件 轴向载荷疲劳试验 试验方法和结果评定 | Threaded fasteners; axial load fatigue testing; test methods and evaluation of results |
| ISO 4042-1999 | 紧固件 电镀层 | Fasteners - Electroplated coatings |
| ISO 4753-1999 | 紧固件 ISO米制外螺纹零件的末端 | Fasteners - Ends of parts with external ISO metric thread |
| ISO 4755-1983 | 紧固件 ISO米制外螺纹用螺纹退刀槽 | Fasteners; Thread undercuts for external metric ISO threads |
| ISO 4759-1-2000 | 紧固件公差 第1部分:螺栓、螺钉、螺栓和螺母 产品等级A、B和C级 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C |
| ISO 4759-3-2000 | 紧固件公差 第3部分:螺栓、螺钉和螺母用平垫圈 产品等级为A和C级 | Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C |
| ISO 5393-1994 | 用于螺纹紧固件的回转式气动装配工具 性能试验方法 | Rotary tools for threaded fasteners - Performance test method |
| ISO 5845-1-1995 | 技术制图 紧固件组合的简单表示法 第1部分:一般原则 | Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles |
| ISO 5845-2-1995 | 技术制图 紧固件组合的简单表示法 第2部分:航空设备用铆钉 | Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment |
| ISO 6157-1-1988 | 紧固件 表面缺陷 第1部分:螺栓、螺钉和螺柱特殊要求 | Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements |
| ISO 6157-2-1995 | 紧固件.表面缺陷.第2部分:螺母 | Fasteners - Surface discontinuities - Part 2: Nuts |
| ISO 6157-3-1988 | 紧固件 表面缺陷 第3部分:螺栓、螺钉和螺柱特殊要求 | Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements |
| ISO 6305-4-1985 | 铁道部件 交货技术条件 第4部分:鱼尾板和紧固件用的非处理钢螺母和螺栓及高强度螺母和螺栓 | Railway components; technical delivery requirements; part 4: untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings |
| ISO 6544-1981 | 安装螺纹紧固件用手持式气动工具 扭矩反作用和扭矩冲击测量 | Hand-held pneumatic assembly tools for installing threaded fasteners; Reaction torque and torque impulse measurements |
| ISO 6891-1983 | 木结构 机械紧固件接头 强度和变形特性确定的一般原则 | Timber structures; Joints made with mechanical fasteners; General principles for the determination of strength and deformation characteristics |
| ISO 7378-1983 | 紧固件 螺栓、螺钉和螺柱 开口销孔和金属丝孔 | Fasteners; Bolts, screws and studs; Split pin holes and wire holes |
| ISO 8839-1986 | 紧固件机械性能 有色金属制造的螺栓、螺钉、螺柱和螺母 | Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 8969-1990 | 木结构 单侧冲孔金属板紧固件和接头的试验 | Timber structures; testing of unilateral punched metal plate fasteners and joints |
| ISO 8970-1989 | 木结构 机械紧固件接头的试验 对木材密度要求 | Timber structures; testing of joints made with mechanical fasteners; requirements for wood density |
| ISO 898-1-1999 | 碳钢和铸钢制造的紧固件机械性能 第1部分:螺栓、螺钉和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs |
| ISO 898-5-1998 | 碳钢和铸钢制造的紧固件机械性能 第5部分:紧定螺钉及类似的不受拉应力的螺纹紧固件 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses |
| ISO 898-7-1992 | 紧固件机械性能 第7部分:螺栓与螺钉的扭矩试验和最小扭矩公称直径1mm～10mm | Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| ISO 8991-1986 | 紧固件的标记制度 | Designation system for fasteners |
| ISO 8992-2005 | 紧固件.螺栓、螺钉、螺柱和螺母通用技术条件 | Fasteners - General requirements for bolts, screws, studs and nuts |
| ISO/TS 17104-2006 | 螺纹紧固件的旋转刀具.液压推动工具.性能试验方法 | Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method |
| 编号 | 中文名称 | 英文名称 |