法国紧固件标准(NF fastener standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
NF A35-556-1984 冶金产品.供金属构件用的外螺纹紧固件用热处理后的特殊钢. (Iron and steel. Heat treatable steels for externally threaded fasteners for structural purposes.)
NF A35-557-1983 冶金产品.高性能机械制造用的外螺纹紧固件用热处理后特殊钢. (Iron and steel. Heat treatable steels for externally threaded, high performance fasteners for engineering purposes.)
NF A35-558-1999 具有特殊高温和/或低温性能的紧固件用钢和镍合金 (Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties.)
NF B51-166-2002 人造木板.紧固件取出能力的测定 (Wood-based panels - Determination of withdrawal capacity of fasteners.)
NF E25-001-2003 紧固件.质量保证体系 (Fasteners - Quality assurance system.)
NF E25-004-1984 紧固件.简单标记 (Fasteners. Short notations.)
NF E25-006-2000 紧固件.验收检验 (Fasteners - Acceptance inspection.)
NF E25-007-1982 紧固件.定货和供货条件 (Fasteners. Order and delivery specifications.)
NF E25-009-1999 紧固件.电镀层 (Fasteners - Electroplated coatings.)
NF E25-011-1992 紧固件的机械特性.由非亚铁金属制造的螺栓,螺钉,柱螺栓和螺母 (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
NF E25-019-2000 紧固件.ISO米制外螺纹部件的端头 (Fasteners - Ends of parts with external ISO metric screw thread.)
NF E25-022-1-2001 紧固件公差.螺栓、螺钉、双头螺栓和螺母.第1部分:产品等级A、B及C (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.)
NF E25-022-1987 紧固件.F级螺钉和螺帽公差(精密机械).螺纹直径1到3mm (FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3 MM.)
NF E25-023-1992 紧固件.螺栓和螺钉的自由尺寸孔 (Fasteners. Clearance hole for bolts and screws.)
NF E25-035-1995 紧固件.不锈钢螺纹连接件.试验方法.使用合格证 (FASTENERS. STAINLESS STEEL THREADED CONNECTIONS. TEST METHODS. FITNESS FOR USE.)
NF E25-040-2000 紧固件.非电解用锌片覆层 (Fasteners - Non-electrolytically applied zinc flake coatings.)
NF E25-042-2003 耐腐蚀不锈钢紧固件的钝化 (Passivation of corrosion-resistant stainless-steel fasteners.)
NF E25-100-1-1999 碳钢合金制成的紧固件的机械性能.第1部分:螺栓、螺钉和螺柱 (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.)
NF E25-100-3-1992 紧固件.表面不连续性.第1部分:一般要求的螺栓、螺钉和螺柱 (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).)
NF E25-100-4-1992 紧固件.表面不连续性.第3部分:特殊要求的螺栓、螺钉和螺柱 (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).)
NF E25-100-5-1998 碳钢和不锈钢制紧固件的机械性能.第5部分:不处在拉伸应力下的固定螺钉和类似螺纹紧固件 (Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.)
NF E25-100-6-1998 不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓 (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)
NF E25-100-7-1995 紧固件的机械性能.第7部分:公称直径1-10mm的螺栓和螺钉的扭力试验和最小扭矩 (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
NF E25-100-8-1998 不锈钢紧固件耐腐蚀的机械特性.不低于拉伸应力下配套螺钉和类似紧固件 (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.)
NF E25-113-1992 紧固件.六角头螺栓.B级、缩杆制品 (Fasteners. Hexagon head bolts. Product grade B. Reduced shank (shank diameter = pitch diameter).)
NF E25-133-1987 紧固件.螺杆千斤顶用的金属螺钉.短六角头长制动端螺钉.A和B级.符号HZ (Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.)
NF E25-134-1987 紧固件.螺杆千斤顶用的金属螺钉.短方头短制动端螺钉.A和B级.符号QZ (Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.)
NF E25-136-1986 紧固件.螺杆.A和B级产品 (Fasteners. Threaded rods. Product grades A and B.)
NF E25-139-1987 紧固件.金属用螺钉.Z十字槽宽凸圆柱形头.A级.符号CBLZS (FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. GRADE A. SYMBOL CBL ZS.)
NF E25-140-1994 紧固件.电弧焊接双端螺栓.符号SA.尺寸和物理化学特性.拉制电弧焊接螺栓系统 (FASTENERS. ARC WELDING STUDS LOADING. SYMBOL SA. DIMENSIONS AND PROPERTIES PHYSICAL-CHIMICAL. DRAWN ARC STUD WELDING SYSTEM.)
NF E25-142-1991 紧固件.电阻焊金属螺钉.缩小头 (FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.)
NF E25-143-1991 紧固件.电容器电焊全螺纹螺柱 (FASTENERS. WELDINGSTUDS BY CONDENSOR DISCHARGE. SYMBOL SD.)
NF E25-144-1991 紧固件.电弧焊全螺纹螺柱 (FASTENERS. ENTIRELY THREADED ARC WELDING STUDS. SYMBOL SF.)
NF E25-145-1991 紧固件.电弧焊不完全螺纹螺柱 (FASTENERS. PARTIALLY THREADED ARC WELDING STUDS. SYMBOL SF.)
NF E25-400-1-1994 紧固件的机械性能.第2部分:有规定的检验载荷值的螺母.粗牙螺纹 (Mechanical properties of fasteners. Part 2 : nuts with specified proof load values. Coarse thread.)
NF E25-400-3-1992 紧固件.表面不连续性.螺母 (Fasteners. Surface discontinuities. Nuts.)
NF E25-418-1991 电阻焊接用六角形螺母.符号HSR紧固件 (FASTENERS. RESISTANCE WELDING HEXAGON NUTS. SYMBOL H SR.)
NF E25-501-2000 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.A级和C级 (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.)
NF E25-540-2002 紧固件.螺母锁紧 (Fasteners - Nut lock.)
NF E25-600-1984 紧固件.木螺钉系列标准 (FASTENERS. WOOD SCREWS FAMILY STANDARD.)
NF E25-651-2003 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉 (Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws.)
NF E25-666-1987 紧固件.自攻螺钉.Z形十字槽和一字槽平圆头螺钉.符号CBL ZS (FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. SYMBOL CBL ZS.)
NF E25-800-0-1994 紧固件.波纹钢管用螺栓.第0部分:按要求所制的螺栓 (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 0 : BOLTS RELATED PRESCRIPTIONS (SCREWS + NUTS).)
NF E25-800-1-1994 紧固件.波纹钢管用螺栓.第1部分:带法兰或不带法兰,带尖或不带尖的六角头螺钉.产品等级A (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF E25-800-2-1994 紧固件.波纹钢管用螺栓.第2部分:带尖或不带尖的圆头螺钉.产品等级A (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
NF E25-800-3-1994 紧固件.波纹钢管用螺栓.第3部分:不带法兰的凸形六角螺母.产品等级C (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 3 : CONVEX HEXAGON NUTS WITHOUT FLANGE. PRODUCT GRADE C.)
NF E25-800-4-1994 紧固件.波纹钢管用螺栓.第4部分:带法兰的凸形螺母.产品等级C (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 4 : CONVEX HEXAGON NUTS WITH FLANGE. PRODUCT GRADE C.)
NF E25-850-1985 紧固件.直角弯钩 (FASTENERS. SQUARE BEND HOOKS.)
NF E25-851-1987 紧固件.滚制螺钉(ISO米制螺纹).特性 (FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.)
NF E27-009-1979 紧固件.轴向负荷疲劳试验 (FASTENERS. FATIGUE TEST UNDER AXIAL LOAD.)
NF E27-156-1983 紧固件.结构安装用圆头铆钉 (Fasteners. Structural round head rivets.)
NF E27-191-1983 紧固件.有肩固定螺钉 (FASTENERS. SHOULDERED RETAINING SCREWS.)
NF E27-355-1980 紧固件.底板受力器材.轻微磨损零件固定用的双耳埋头螺栓 (FASTENERS. EQUIPMENT FOR WORKING THE SOIL. COUNTERSUNK HEAD NIB BOLTS FOR FASTENING THIN WEAR PARTS.)
NF E51-361-1995 螺纹紧固件用旋转式气动装配工具.性能试验 (Rotary tools for threaded fastners. Performance test method.)
NF E65-100-1-2000 手持非电动工具.安全要求.第1部分:非螺纹机器紧固件的组件动力工具 (Hand-held non-electric power tools - Safety requirements - Part 1 : assembly power tools for non-threaded mechanical fasteners.)
NF E65-100-6-2000 手持非电动工具.安全要求.第6部分:螺纹紧固件组件动力工具 (Hand-held non-electric power tools - Safety requirements - Part 6 : assembly power tools for threaded fasteners.)
NF E65-115-1999 声学.紧固件传动工具用噪声试验规范.工程法 (Acoustics - Noise test code for fastener driving tools - Engineering method.)
NF H50-010-1-1996 托盘连接件的检验方法.第1部分:托盘用钉子、其它榫钉型紧固件和U形钉抗弯曲性的测定 (Methods of test for pallet joints. Part 1 : determination of bending resistance of pallet nails, other dowel-type fasteners and staples.)
NF L20-010-1989 航空和航天.设备.NFE系列紧固件的选择 (AEROSPACE SERIES. EQUIPMENT. CHOICE OF FASTENERS,NF E SERIES.)
NF L21-215-2000 紧固件.实心万向头铆钉 (Fasteners - Rivets, solid, universal head.)
NF L21-250-2000 紧固件.管形铆钉 (Fasteners - Rivets, tubular.)
NF L21-271-2000 紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的凸头锁紧螺栓 (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF L21-272-2000 紧固件.紧公差T-A6V钛合金杆并有2024铝合金环的100°埋头锁紧螺栓 (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in aluminium alloy 2024.)
NF L21-273-2000 紧固件.紧公差T-A6V铝合金杆并有XC10钢环凸头锁紧螺栓 (Fasteners - Lockbolts, protruding head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF L21-274-2000 紧固件.紧公差T-A6V钛合金杆并有XC10钢环100°埋头锁紧螺栓 (Fasteners - Lockbolts, 100 o countersunk head, with close tolerance and titanium alloy T-A6V shank and with collar in steel XC 10.)
NF L22-023-1967 飞行器紧固件标准一览表.符合B.N.A.E.公差的ISO螺纹 (LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO B.N.A.E. TOLERANCES.)
NF L22-024-1967 飞行器紧固件标准一览表.符合ISO公差的ISO螺纹 (LIST OF STANDARDS FOR AIRCRAFT FASTENERS. ISO THREADS TO ISO TOLERANCES.)
NF L22-030-1966 飞行器紧固件.钢号和机械特性.(RECH.) (AIRCRAFT FASTENERS. STEEL GRADES AND MECHANICAL PROPERTIES. (RECH.).)
NF L22-031-2003 紧固件.金属材料的选择 (Fasteners - Selection of metallic materials.)
NF L22-035-1966 飞行器紧固件.标志.(RECH.) (AIRCRAFT FASTENERS. MARKING. (RECH.).)
NF L22-062-1966 用扳手操作的紧固件的ISO对边 (ISO ACROSS FLATS FOR FASTENERS WITH SPANNER DRIVE.)
NF L22-500-2001 紧固件.最高使用温度小于或等于425℃的自锁紧螺母.技术要求 (Fasteners - Nuts, self-locking, with maximum operating temperature less than or equal to 425 o - Technical requirements.)
NF L22-721-1966 飞行器紧固件.带开口销孔的实心螺纹销.ISO螺纹.(RECH.) (AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).)
NF L22-722-1966 飞行器紧固件.带开口销孔的空心螺纹销.ISO螺纹.(RECH.) (AIRCRAFT FASTENERS. HOLLOW PINS,THREADED,WITH SPLIT PIN HOLE. (ISO THREAD). (RECH.).)
NF L22-723-1966 飞行器紧固件.无开口销孔的实心螺纹销.ISO螺纹.(RECH.) (AIRCRAFT FASTENERS. SOLID PINS,THREADED,WITHOUT SPLIT PIN HOLE. (ISO THREAD). (RECH.).)
NF L23-142-1966 航空飞行器紧固件.斜面厚垫圈 (AIRCRAFT FASTENERS. THICK CHAMFERED WASHERS.)
NF L23-310-1977 航空飞行器紧固件.开口销 (AIRCRAFT FASTENERS. SPLIT PINS.)
NF L23-350-1966 飞行器紧固件.钢板制带耳的止动垫圈.平型 (AIRCRAFT FASTENERS. TAB WASHERS MADE OF STEEL PLATE,FLAT TYPE.)
NF L23-351-1966 飞行器紧固件.钢板制外部带耳的止动垫圈 (AIRCRAFT FASTENERS. EXTERNAL TAB WASHERS MADE OF STEEL PLATE.)
NF P21-205-1-1995 DTU31.3.与金属板紧固件和联接板相关的木结构框架.第1部分:建筑规则 (DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 1 : CONSTRUCTION RULES.)
NF P21-205-2-1995 DTU31.3.与金属板紧固件或联接板相关的木材结构.第2部分:设计规则 (DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 2 : DESIGN RULES.)
NF P21-205-3-1995 DTU31.3.与金属板紧固件和联接板相关的木结构框架.第3部分:特别规范手册 (DTU 31-3. TIMBER STRUCTURES CONNECTED WITH METAL PLATE FASTENERS OR GUSSETS. PART 3 : PARTICULAR SPECIFICATIONS BOOK.)
NF P21-303-1993 木材构件.试验方法.暗销形紧固件基座值和嵌入强度测定 (TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF EMBEDDING STRENGTH AND FOUNDATION VALUES FOR DOWEL TYPE FASTENERS. (EUROPEAN STANDARD EN 383).)
NF P21-312-1999 木结构.试验方法.用穿孔金属板紧固件进行组装 (Timber structures - Test methods - Joints made with punched metal plate fasteners.)
NF P21-380-2002 木结构.试验方法.机械紧固件用接头的循环试验 (Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners.)
NF P21-384-1993 木材构件.试验方法.暗销形紧固件屈服力矩.钉子 (TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF THE YIELD MOMENT OF DOWEL TYPE FASTENERS. NAILS. (EUROPEAN STANDARD EN 409).)
NF P21-385-1999 木紧固件.木连接件规范 (Timber fasteners - Specifications for connectors for timber.)
NF P21-388-2002 木质紧固件.负载电容器的特性和连接件的滑动系数 (Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints.)
NF T47-131-2002 输送机皮带.机械紧固件的强度测定.静态试验法 (Conveyor belts - Determination of strength of mechanical fastenings - Static test method.)
P21-205-1995 DTU 31-3.与金属板紧固件或结点板相连接的木构件.第1部分:技术规范.第2部分:特别条款 (DTU 31-3 - Timber structures connected with metal plate fasteners or gussets - Part 2 : design rules - Part 3 : particular specifications book.)
编号 中文名称 英文名称

返回