| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| ANSI A135.4-2004 | 基本的硬质纤维板 | Basic Hardboard |
| ANSI A135.5-2004 | 预制硬质纤维板嵌板 | Prefinished Hardboard Paneling |
| ANSI A208.2-2002 | 内部使用的中密度纤维板 | Medium Density Fiberboard for Interior Use |
| ANSI INCITS 231-1994 | 信息系统.纤维分布式数据接口(FDDI).物理层协议(PHY-2) | Information Systems - Fiber Distributed Data Interface (FDDI) - Physical Layer Protocol (PHY-2) |
| ANSI INCITS 239-1994 | 信息系统.纤维分布式数据接口(FDDI).令牌环媒体访问控制-2(MAC-2)(以前为ANSI X3.239-1994 (R1999)) | Information Systems - Fibre Distributed Data Interface (FDDI) - Token Ring Media Access Control-2 (MAC-2) (formerly ANSI X3.239-1994 (R1999)) |
| ANSI INCITS230-1994 | 信息技术.纤维通道.物理和信令接口 | Information technology - Fibre channel - Physical and signaling interface (FC-PH) |
| ANSI INCITS332 AMD 1-2003 | 信息技术.纤维信道任意环路（FC-AL-2）.修改件1 | Information technology - Fibre Channel Arbitrated Loop (FC-AL-2) Amendment 1 |
| ANSI INCITS332-1999 | 纤维信道任意环路（FC-AL-2） | Fibre Channel Arbitrated Loop (FC-AL-2) |
| ANSI INCITS356-2002 | 信息技术.纤维信道.音频视频(FC-AV) | Information technology - Fibre Channel - Audio Video (FC-AV) |
| ANSI INCITS357-2002 | 信息技术.纤维信道.虚拟接口结构映射协议(FC-VI) | Information Technology - Fibre Channel - Virtual Interface Architecture Mapping Protocol (FC-VI) |
| ANSI INCITS416-2006 | 信息技术.SCSI的纤维信道协议.第三版(FCP-3) | Information technology - Fibre Channel Protocol for SCSI, Third Version (FCP-3) |
| ANSI INCITS433-2007 | 信息技术.纤维信道链接服务(FC-LS) | Information Technology - Fibre Channel Link Services (FC-LS) |
| ANSI N322-1996 | 直接和间接读取石英纤维便携式放射量测定器的检验和试验规范 | Inspection and Test Specifications for Direct and Indirect Reading Quartz Fiber Pocket Dosimeters |
| ANSI N42.5-1980 | 盖革-米勒计数管的管座.石英－纤维静电计式曝光表和相似曝光表的相互关系 | Bases for gm counter tubes - Interrelationship of quartz-fiber electrometer type exposure meters and companion exposure meter chargers |
| ANSI NCITS 321-1998 | 信息技术.纤维信道.转换结构(FC-SW) | Information Technology - Fibre Channel - Switch Fabric (FC-SW) |
| ANSI X3.229-1994 | 信息系统.纤维分配数据接口(FDDI).站管理(SMT) | Information systems - Fibre Distributed Data Interface (FDDI) - Station Management (SMT) |
| ANSI X3.230 AMD 1-1996 | 信息技术.纤维信道.物理和信号接口(FC-PH).修改1 | Information technology - Fibre channel - Physical and signaling interface (FC-PH); Amendment 1 |
| ANSI X3.230-1994 | 信息技术.纤维通道.物理和信令发送接口(FC-PH) | Information technology - Fibre channel - Physical and signaling interface (FC-PH) |
| ANSI X3.231-1994 | 信息系统.纤维分配数据接口(FDDI).物理层协议(PHY-2) | Information systems - Fibre Distributed Data Interface (FDDI) - Physical layer protocol (PHY-2) |
| ANSI X3.237-1995 | 信息技术.光纤分配数据接口(FDDI).权标环低成本纤维物理层依赖媒体 | Information technology - Fibre Distributed Data Interface (FDDI) - Token ring Low-Cost Fibre Physical Layer Medium Dependent (LCF-PMD) |
| ANSI X3.239-1994 | 信息系统.纤维分配数据接口(FDDI).权标环介质存取控制-2(MAC-2) | Information systems - Fibre Distributed Data Interface (FDDI) - Token ring media access control-2 (MAC-2) |
| ANSI X3.254-1994 | 信息技术.纤维通道.HIPPI-FP(FC-FP)的绘制 | Information technology - Fibre channel - Mapping to HIPPI-FP (FC-FP) |
| ANSI X3.262-1995 | 信息技术.纤维分配数据接口(FDDI).一致性试验协议.协议执行一致性陈述形式表(CT-PICS) | Information technology - Fiber Distributed Data Interface (FDDI) - Conformance test protocol implementation conformance statement proforma (CT-PICS) |
| ANSI X3.269-1996 | 信息技术.小型计算机系统接口(SCSI)的纤维通道协议 | Information technology - Fibre channel protocol for SCSI |
| ANSI X3.297-1997 | 信息技术.纤维信道.物理和信令发送接口-2 | Information technology - Fibre Channel - Physical and Signalling Interface-2 (FC-PH-2) |
| ANSI X3.303-1998 | 纤维信道物理和信号发送接口3(FC-PH-3) | Fibre Channel Physical and Signalling Interface-3 (FC-PH-3) |
| ANSI/AAMI ST65-2000 | 医疗卫生设备用可重复使用的外科纤维术程序 | Processing of Reusable Surgical Textiles for Use in Health Care Facilities |
| ANSI/ASTM C581-2003 | 液体设备的玻璃纤维增强结构用热固性树脂耐化学腐蚀性测定的实施规范 | Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ANSI/ASTM D1030-1999 | 纸张和纸板的纤维分析试验方法 | Test Method for Fiber Analysis of Paper and Paperboard |
| ANSI/ASTM D2105-2001 | 玻璃纤维径向拉伸特性试验方法 | Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ANSI/ASTM D2310-2006 | 机制玻璃纤维(玻璃纤维增强热固树脂)管规范 | Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D2861-1998 | 复合型带介电薄膜或精致纤维的铜箔柔韧性测试方法 | Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics |
| ANSI/ASTM D2925-2001 | 全孔流情况下玻璃纤维(玻璃纤维增强热固树脂)束偏转测试方法 | Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ANSI/ASTM D2992-2006 | 玻璃纤维(增强玻璃纤维的热固树脂)管和配件用获得静液压或压力设计基础的规范 | Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| ANSI/ASTM D2996-2001 | 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂)管用规范 | Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe |
| ANSI/ASTM D2997-2001 | 离心成形玻璃纤维(玻璃纤维增强热固树脂)管规范 | Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D3262-2006 | 纤维玻璃(玻璃纤维增强热固树脂)污水管规范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ANSI/ASTM D3299-2000 | 纤维缠绕的玻璃纤维增强的热固树脂耐化学腐蚀的容器规范(08.04) | Specification for Filament-Wound Glass Fiber Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
| ANSI/ASTM D3345-1996 | 木材及其他纤维素材料防白蚁实验室评定试验方法 | Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ANSI/ASTM D3353-2004 | 纤维绝缘磁性金属线的试验方法 | Test Methods for Fibrous-Insulated Magnet Wire |
| ANSI/ASTM D3517-2006 | 玻璃纤维增强热固性树脂压力管的规范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ANSI/ASTM D3567-1997 | 玻璃纤维(玻璃纤维增强热固树脂)管和配件的尺寸测定用实施规程 | Practice for Determining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings |
| ANSI/ASTM D3681-2006 | 在偏转条件下玻璃纤维(玻璃纤维增强热固树脂)管的耐化学腐蚀的试验方法 | Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
| ANSI/ASTM D3753-2005 | 玻璃纤维增强聚酯检查孔规范 | Specification for Glass Fiber-Reinforced Polyester Manholes |
| ANSI/ASTM D3754-2006 | 玻璃纤维增强热固性树脂污水压力管和工业压力管的规范 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| ANSI/ASTM D3841-2001 | 玻璃纤维增强聚酯塑料板规范 | Specification for Glass Fiber-Reinforced Polyester Plastic Panels (08.04) |
| ANSI/ASTM D3982-2003 | 接触压模制玻璃纤维增强热固性树脂管和护罩规范 | Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Duct and Hoods |
| ANSI/ASTM D4097-2001 | 纤维玻璃增强的热固树脂耐化学药品罐的规范 | Specification for Conduct Molded Glass-Fiber-Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
| ANSI/ASTM D4167-1997 | 纤维增强塑料风扇和鼓风机规范 | Specification for Fiber-Reinforced Plastic Fans and Blowers (08.04) |
| ANSI/ASTM D4250-1999 | 含吸水纤维产品持水量的测试方法 | Test Method for Water-Holding Capacity of Bibulous Fibrous Products |
| ANSI/ASTM D4398-2007 | 用板单面曝光法测定玻璃纤维增强热固性树脂耐化学性的试验方法 | Test Method for Determining the Chemical Resistance of Fiberglas-Reinforced Thermosetting Resins by One-Side Panel Exposure |
| ANSI/ASTM D4476-1997 | 纤维增强拉挤塑料棒弯曲特性试验方法 | Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
| ANSI/ASTM D4881-2005 | 漆包纤维或薄膜缠绕磁线的耐热性标准试验方法 | Test Method for Thermal Endurance of Varnished Fibrous or Film Wrapped Magnet Wire |
| ANSI/ASTM D4969-1997 | PTFE覆层玻璃纤维规范(08.03) | Specification for PTFE Coated Glass Fabric (08.03) |
| ANSI/ASTM D5319-2001 | 玻璃纤维增强聚酯墙板和天花板规范 | Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
| ANSI/ASTM D5365-2006 | 玻璃纤维(玻璃纤维增强热固树脂)管的长期环弯曲应力试验方法 | Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D5421-2005 | 接触模制玻璃纤维(玻璃-纤维-增强热固性树脂)法兰的标准规范 | Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ANSI/ASTM D5677-2005 | 用于航空喷气机涡轮燃料的玻璃纤维(玻璃纤维加固热硬化树脂)管与管件规范.粘合剂粘接接头型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM D5685-2005 | 玻璃纤维规范.(玻璃纤维加固的热硬性树脂)加压管配件 | Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
| ANSI/ASTM D585-1997 | 单批纸、纸板、纤维纸板和相关产品的取样和验收惯例 | Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Products |
| ANSI/ASTM D6041-1997 | 接触模压"纤维玻璃" (玻璃纤维增强热固性树脂)耐腐蚀管和配件规范 | Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| ANSI/ASTM D619-1999 | 电绝缘纤维板试验方法 | Test Methods for Vulcanized Fibre Used for Electrical Insulation (10.01) |
| ANSI/ASTM D706-1996 | 醋酸纤维素模压和挤压成形化合物规范 | Specification for Cellulose Acetate Molding and Extrusion Compounds |
| ANSI/ASTM D707-1996 | 醋酸-丁酸纤维素模压和挤压成形化合物规范 | Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds |
| ANSI/ASTM D787-1997 | 乙基纤维模制和挤压化合物规范 | Specification for Ethyl Cellulose Molding and Extrusion Compounds |
| ANSI/ASTM E1650-2004 | 乙酸纤维素剂量测定系统的使用规程 | Use of a Cellulose Acetate Dosimetry System, Practice for |
| ANSI/ASTM F1092-2004 | 挤拔玻璃纤维增强塑料制露天防风暴和方型防护扶手规范 | Specification for Fiberglass (Grp) Pultruded Open-Weather Storm- and Guard-Square Handrails |
| ANSI/ASTM F1173-2001 | 船用热固树脂玻璃纤维管和配件规范 | Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications |
| ANSI/ASTM F1932-1998 | 睡袋纺织纤维回弹力测量试验方法 | Test Method for Measuring Sleeping Bag Loft |
| ANSI/ASTM F2019-2003 | 将玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)现场拖拉并安装进已有管道的操作规程 | Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ANSI/ASTM F2075-2001 | 运动场设备下方和周围的运动场安全表面用工程木纤维规范 | Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| ANSI/ASTM F2075a-2001 | 运动场设备下方和周围作为运动场安全地面的工程木纤维规范 | Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| ANSI/ASTM F2087-2001 | 玻璃纤维编织绳和油绳包装惯例 | Practices for Packing, Fiberglass, Braided, Rope and Wick |
| ANSI/ASTM F2154-2001 | 吸音板、玻璃纤维和表面平整的多孔玻璃纤维布规范 | Specification for Sound Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
| ANSI/AWWA C950-2007 | 玻璃纤维压力管 | Fiberglass Pressure Pipe |
| ANSI/AWWA D120-2002 | 热固玻璃增强纤维塑料水箱 | Thermosetting Fiberglass-Reinforced Plastic Tanks |
| ANSI/AWWA F101-2007 | 玻璃纤维增强塑料洗涤水槽和流水槽的接触模压 | Contact Molded, Fiberglass Reinforced Plastic Washwater Troughs and Launders |
| ANSI/AWWA F102-2007 | 合模模塑玻璃纤维增强塑料的堰板、浮渣档板和安装托架 | Matched-Die Molded, Fiberglass Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets |
| ANSI/CEA 709.4-2000 | 纤维光学信道标准 | Fiber Optic Channel Standard |
| ANSI/EIA 492B000-1988 | IV类单模光导纤维分规范 | Sectional Specification for Class IV Single-Mode Optical Waveguide Fibers |
| ANSI/EIA 492BA00-1988 | IVa级色散无漂移单膜光导纤维的空白详细规范. | Blank Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Waveguide Fibers |
| ANSI/EIA 5150000-1986 | 光学纤维和光缆接头的一般规范 | Generic Specification for Optical Fiber and Cable Splices |
| ANSI/EIA/TIA 455-43-1984 | 光导纤维的输出近场辐射图测量 | Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fiber |
| ANSI/EIA/TIA 455-56B-1995 | 光导纤维和光缆耐霉性评估的试验方法 | Evaluating Fungus Resistance of Optical Waveguide Fibers and Cables, Test Method for |
| ANSI/EIA/TIA 492AAAA-1989 | 62.5um连芯直径/125um连皮直径1a级多元分级指数光导纤维的详细规范 | Detail Specification for 62.5um Core Diameter/125-um Cladding Diameter Class 1a Multimore Graded-Index Optical Waveguide Fibers |
| ANSI/EIA/TIA 492BB00-1989 | 1Vb级色散位移的单模光导纤维的空白详细规范 | Blank Detail Specification for Class lVb Dispersion-Shifted Single Mode Optical Waveguide Fibers |
| ANSI/EIA/TIA-455-104A-1993 | 纤维光学电缆的循环弯曲试验 | Fiber Optic Cable Cyclic Flexing Test |
| ANSI/EIA/TIA-455-15A-1992 | 光学纤维元件的高度/浸入试验 | Altitude/Immersion of Fiber Optic Components |
| ANSI/EIA/TIA-455-37-1993 | 纤维光学电缆高低温的弯曲试验 | Fiber Optic Cable Bend Test, Low and High Temperature |
| ANSI/IPC 4110-1998 | 确定印制电路板用非织物纤维素基纸板板特性的鉴定方法和规范 | Specification and Characterization Methods for Nonwoven Cellulose Based Paper for Printed Boards |
| ANSI/IPC 4412-2002 | 印制电路板用由"E"级玻璃纤维丝机织的精制织物规范 | Specification for Finished Fabric Woven from "E" Glass for Printed Boards |
| ANSI/NCCLS H8-A 2-1997 | 用乙酸纤维素电泳法检测反常血红蛋白 | Abnormal Hemoglobin Using Cellulose Acetate Electrophoresis, Detection of |
| ANSI/NFPA 40-2007 | 硝酸纤维胶片的存储和处置标准 | Standard for the Storage and Handling of Cellulose Nitrate Film |
| ANSI/NFPA 42-1997 | 低氮硝化纤维素塑料的存储 | Pyroxylin Plastic, Storage of |
| ANSI/SCTE 122-2006 | 美国有线电视通信工程师协会(SCTE)推荐厂外分插复用器用光导纤维电缆类型 | SCTE Recommended Optical Fiber Cable Types for Outside Plant Drop Applications |
| ANSI/SCTE 25-1-2002 | 混合光导纤维/同轴电缆厂外状态监测.物理层 | Hybrid Fiber/Coax Outside Plant Status Monitoring - Physical (PHY) Layer |
| ANSI/SCTE 25-2-2002 | 混合光导纤维/同轴电缆厂外状态监测.中速存取控制(MAC)层 | Hybrid Fiber/Coax Outside Plant Status Monitoring - Media Access Control (MAC) Layer |
| ANSI/SCTE 83-3-2004 | 混合纤维/同轴内置设备状况监控SCTE-HMS-HMTS-MIB管理信息库定义 | Hybrid Fiber/Coax Inside Plant Status Monitoring SCTE-HMS-HMTS-MIB Management Information Base (MIB) Definition |
| ANSI/TIA TR-1029-2004 | IEC 61282-3 纤维光学通信系统设计指南.第3部分:偏振模式色散的计算 | IEC 61282-3 Fibre Optic Communication System Design Guides - Part 3: Calculation of Polarizatioon Mode Dispersion |
| ANSI/TIA-1026-2004 | IEC 61282-5纤维光学通信系统设计指南.第5部分:色散的调节和补偿 | IEC 61282-5 Fibre Optic Communication System Design Guides - Part 5: Accommodation and Compensation of Dispersion |
| ANSI/TIA-1048-2005 | IEC 62005-7.纤维光学互联器件和无源元件的可靠性.第7部分:守命应力制模 | IEC 62005-7 - Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 7: Life Stress Modeling |
| ANSI/TIA-440-B-2004 | 纤维光学术语和定义 | Fiber Optic Terms and Definitions |
| ANSI/TIA-455-104A-1993 | 纤维光缆循环弯曲试验 | Fiber Optic Cable Cyclic Flexing Test |
| ANSI/TIA-455-161-1996 | 温度和湿度老化对光学纤维机械特性影响的测量程序 | Procedure for Measuring Temperature and Humidity Aging Effects on Mechanical Characteristics of Optical Fibers |
| ANSI/TIA-455-16A-2000 | 纤维光学元件的盐雾(腐蚀)试验 | Salt Spray (Corrosion) Test for Fiber Optic Components |
| ANSI/TIA-455-178-B-2003 | FOTP-178 IEC 60793-1-32 光学纤维.第1-32部分:测量方法和试验规程.涂层可剥离性 | FOTP-178 IEC 60793-1-32 Optical Fibers - Part 1-32: Measurement Methods and Test Procedures - Coating Stripability |
| ANSI/TIA-455-194-1999 | 光纤连接器的纤维回推力测量 | Measurement of Fiber Pushback in Optical Connectors |
| ANSI/TIA-455-195-A-2003 | 光学纤维涂层的几何学测量.FOTP195 | Coating Geometry Measurement for Optical Fiber - FOTP195 |
| ANSI/TIA-455-20-B-2004 | 纤维光学.光学传输中的变化测量 | Fiber Optics - Measurement of Change in Optical Transmittance |
| ANSI/TIA-455-224-2002 | FOTP224.纤维光学色散试验组的校准 | FOTP224 - Calibration of Fibre Optic Chromatic Dispersion Test Sets |
| ANSI/TIA-455-225-2002 | FOTP225.纤维光学几何试验组的校准用端面图像分析程序 | FOTP225 - End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets |
| ANSI/TIA-455-227-2002 | FOTP-227-IEC 61300.纤维光学装置和无源元器件.基本试验和测量程序.第3-24部分:检查和测量.偏振保持光纤用 | FOTP-227-IEC 61300- Fiber Optic Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-24: Examinations and Measurements - Keying Accuracy of Optical Connectors for Polarization Maintaining Fibre |
| ANSI/TIA-455-231-2003 | IEC 61315.纤维光学功率计的校准 | IEC 61315 - Calibration of Fibre-Optic Power Meters |
| ANSI/TIA-455-235-2004 | FOTP235.IEC 61280-2-8纤维光学通信子系统试验过程.数字系统.第2-8部分:使用Q-因子测量法测定低BER | FOTP235 - IEC 61280-2-8 Fibre Optic Communication Subsystem Test Procedures - Digital Systems - Part 2-8: Determination of Low BER Using Q-Factor Measurements |
| ANSI/TIA-455-236-2004 | FOTP236.IEC 61280-2-9.纤维光学通信子系统试验过程.第2-6部分:数字系统.密集波分多路复用系统的光学信噪比 | FOTP236 - IEC 61280-2-9 - Fibre Optic Communication Subsystem Test Procedures - Part 2-6: Digital Systems - Optical Signal-to-Noise Ratio Measurement for Dense Wavelength-Division Multiplexed Systems |
| ANSI/TIA-455-25C-2002 | 纤维光缆组件的反复冲击试验 | Repeated Impact Testing of Fiber Optic Cable Assemblies |
| ANSI/TIA-455-32A-1990 | 纤维光学线路间断性试验 | Fiber Optic Circuit Discontinuities |
| ANSI/TIA-455-34A-1995 | 纤维光学.互连接装置插入损耗试验 | Fiber Optics - Interconnection Device Insertion Loss Test |
| ANSI/TIA-455-43A-1999 | 光学波导纤维的输出近场辐射图形测量 | Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fiber |
| ANSI/TIA-455-4C-2002 | 纤维光学.元部件的温度寿命试验 | Fiber Optics - Component Temperature Life Test |
| ANSI/TIA-455-56B-1995 | 评价光波导纤维和光缆耐霉菌性能的试验方法 | Evaluating Fungus Resistance of Optical Waveguide Fibers and Cables, Test Method for |
| ANSI/TIA-455-57-B-1994 | 试验用光学纤维端面的制备和检验 | Preparation and Examination of Optical Fiber Endface Testing Purposes |
| ANSI/TIA-455-72-1997 | 光学纤维光特性受温度和湿度循环影响的评估方法 | Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Optical Characteristics of Optical Fiber |
| ANSI/TIA-455-73-1997 | 光学纤维机械特性受温度和湿度循环影响的评估方法 | Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Mechanical Characteristics of Optical Fiber |
| ANSI/TIA-568-B.1-3-2003 | 商用建筑电信电缆敷设标准.第1部分:一般要求.补充件3.根据纤维类型决定的光纤设备的可支持距离和信道衰减 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type |
| ANSI/TIA-568-B.1-4-2003 | 商用建筑电信电缆敷设标准.第1部分:一般要求.补充件4. 第6类850nm激光优选的50/125微米多模纤维的鉴别 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA-604-10A-2002 | 纤维光学连接器互配性标准 | Fiber Optic Connector Intermateability Standard |
| ANSI/TIA-604-12-2000 | MT-RJ型纤维光学连接器互配性标准 | Fiber Optic Connector Intermateability Standard for Type MT-RJ |
| ANSI/TIA-604-13-A-2004 | FOCIS 13.纤维光学连接器互配性标准.SFOC 1.25型 | FOCIS 13 - Fiber Optic Connector Intermateability Standard, Type SFOC 1.25 |
| ANSI/TIA-604-15-2003 | FOCIS 15.纤维光学连接器互配性标准.MF型 | FOCIS 15 - Fiber Optic Connector Intermateability Standard - Type MF |
| ANSI/TIA-604-16-A-2004 | FOCIS 16.纤维光学连接器互配性标准.LSH型 | FOCIS 16 - Fiber Optic Connector Intermateability Standard - Type LSH |
| ANSI/TIA-604-2-B-2004 | 纤维光学连接器互配性标准 | Fiber Optic Connector Intermateability Standard |
| ANSI/TIA-604-3-B-2004 | 纤维光学连接器互配性标准 | Fiber Optic Connector Intermateability Standard |
| ANSI/TIA-604-4-1997 | 纤维光学连接器互配性标准 | Fiber Optic Connector Intermateability Standard |
| ANSI/TIA-604-4-B-2004 | FOCIS4.纤维光学连接器互配性标准.FC和FC-APC型 | FOCIS4 - Fiber Optic Connector Intermateability Standard, Type FC and Type FC-APC |
| ANSI/TIA-604-6-1999 | 纤维光学连接器互配性标准(光纤插孔连接器) | Fiber Optic Connector Intermateability Standard (Fiber Jack Connector) |
| ANSI/TIA-604-7A-2002 | FOCIS-7纤维光学连接器互配性标准 | FOCIS-7, Fiber Optic Connector Intermateability Standard |
| ANSI/TIA/EIA 455-131-1997 | 光导纤维带剩余扭力应变的测量 | Measurement of Optical Fiber Ribbon Residual Twist |
| ANSI/TIA/EIA 455-188-1991 | 新提案 FOTP.纤维光学元部件的低温试验 | Proposed New FOTP, Low-Temperature Testing of Fiber Optics Components |
| ANSI/TIA/EIA 455-194-1999 | 光纤连接器的纤维回推力测量 | Measurement of Fiber Pushback in Optical Connectors |
| ANSI/TIA/EIA 455-201-2001 | 极化固定纤维或极化纤维软导线装置和电缆组件的回程损耗 | Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
| ANSI/TIA/EIA 455-203-2001 | 分级指示多模纤维传输器的投入动力分配测量程序 | Launched Power Distribution Measurement Procedure for Graded-Index Multi-mode Fiber Transmitters |
| ANSI/TIA/EIA 455-224-2002 | FOTP224.纤维光学色散试验组件的校准 | FOTP224 - Calibration of Fibre Optic Chromatic Dispersion Test Sets |
| ANSI/TIA/EIA 455-225-2002 | FOTP225.纤维光学几何试验组件的校准用端面图像分析规程 | FOTP225 - End Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets |
| ANSI/TIA/EIA 455-227-2002 | FOTP-227-IEC 61300.纤维光学器件和无源元件.基本试验和测量程序.第3-24部分:检查和测量.采用偏振保持光纤 | FOTP-227-IEC 61300- Fiber Optic Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-24: Examinations and Measurements - Keying Accuracy of Optical Connectors for Polarization Maintaining Fibre |
| ANSI/TIA/EIA 455-24-1991 | 单模纤维水峰值衰减测量 | Water Peak Attenuation Measurement of Single-Mode Fibers |
| ANSI/TIA/EIA 455-43A-1999 | 光学波导纤维的输出近场辐射图形测量 | Output Near-Field Radiation Pattern Measurement of Optical Waveguide Fiber |
| ANSI/TIA/EIA 455-4C-2002 | 纤维光学元件温度寿命试验 | Fiber Optics - Component Temperature Life Test |
| ANSI/TIA/EIA 455-56B-1995 | 评价光导纤维和光缆的抗菌能力 | Evaluating Fungus Resistance of Optical Waveguide Fibers and Cables, Test Method for |
| ANSI/TIA/EIA 455-60-A-2000 | 利用OTDR进行纤维和光缆长度测量 | Measurement of Fiber or Cable Length Using an OTDR |
| ANSI/TIA/EIA 455-69-A-1991 | 对光学纤维最低和最高暴露温度评价的试验方法 | Test Procedure for Minimum and Maximum Exposure Temperature Evaluation of Optical Fibers |
| ANSI/TIA/EIA 455-71-A-1999 | 温度冲击对纤维光学元部件影响的测量方法 | Procedure to Measure Temperature-Shock Effects on Fiber Optic Components |
| ANSI/TIA/EIA 455-72-1997 | 循环暴露于温度和湿度对光纤维的光学特性影响的评定程序 | Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Optical Characteristics of Optical Fiber |
| ANSI/TIA/EIA 455-73-1997 | 循环暴露于温度和湿度对光纤维的机械特性影响的评定程序 | Procedure for Assessing Temperature and Humidity Cycling Exposure Effect on Mechanical Characteristics of Optical Fiber |
| ANSI/TIA/EIA 455-75A-1996 | 光导纤维的浸液试验 | Fluid Immersion Test for Optical Waveguide Fiber |
| ANSI/TIA/EIA 455-80B-1998 | 用传输功率测量散单模纤维的截止波长 | Measuring Cutoff Wavelength of Uncabled Single-Mode Fiber by Transmitted Power |
| ANSI/TIA/EIA 455-81-B-2000 | 填充式纤维光缆用流体化合物 (滴) | Compound Flow (Drip) Test for Filled Fiber Optic Cable |
| ANSI/TIA/EIA 455-98-A-1983 | 外部纤维光缆外部冷冻试验 | External Fiber Optic Cable External Freezing Test |
| ANSI/TIA/EIA 492CAAA-1998 | IVa级非色散位移单模式光学纤维的详细规范 | Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Fibers |
| ANSI/TIA/EIA 568-B.1-3-2003 | 商用建筑电信电缆敷设标准.第1部分:一般要求.附录3.根据纤维类型决定的光纤设备的可支持距离和信道衰减 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 3 - Supportable Distances and Channel Attenuation for Optical Fiber Applications by Fiber Type |
| ANSI/TIA/EIA 568-B.1-4-2003 | 商用建筑电信电缆敷设标准.第1部分:一般要求.附录4.类别6、850nm激光优选50/125微米多模纤维 | Commercial Building Telecommunications Cabling Standard - Part 1: General Requirements - Addendum 4 - Recognition of Category 6 and 850 nm laser-Optimized 50/125 Micron Multi-mode Fiber |
| ANSI/TIA/EIA 587-1992 | 纤维光学图形符号 | Fiber Optic Graphic Symbols |
| ANSI/TIA/EIA 604-4-A-2000 | 纤维光学连接器相互配合性标准(FOCIS) | Fiber Optic Connector Intermateability Standards (FOCIS) |
| ANSI/TIA/EIA 604-4A-2000 | 纤维光学连接器配合性标准(FOCIS) | Fiber Optic Connector Intermateability Standards (FOCIS) |
| ANSI/UL 746E-2007 | 聚合材料的安全标准.工业层压薄板、纤维缠绕管材、硫化纤维和印刷电路板用材料 | Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed Wiring Boards |
| ASME BPVC Section 10-2001 | ASME锅炉和压力容器规程.第10节:纤维增强塑料压力容器 | (ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels) |
| ASTM A 820/A 820M-2006 | 纤维加筋混凝土用钢纤维的标准规范 | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete |
| ASTM A 974-1997 | 焊线纤维金属筐和金属丝网的标准规范.(金属涂层或聚氯乙烯(PVC)涂层) | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) |
| ASTM C 1014-2003 | 喷施的矿物纤维吸热和吸音绝缘材料标准规范 | Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation |
| ASTM C 1015-2006 | 纤维素和矿物纤维松充填热绝缘料装配的标准规范 | Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation |
| ASTM C 1050-1991 | 刚性蜂窝状聚氨基甲酸乙酯--纤维素纤维组合屋面绝缘材料 | Rigid Cellular Polystyrene-Cellulosic Fiber Composite Roof Insulation |
| ASTM C 1071-2005 | 纤维玻璃管道衬里绝缘材料(隔热和吸音材料)标准规范 | Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) |
| ASTM C 1086-1996 | 玻璃纤维油毛毡的热绝缘标准规范 | Standard Specification for Glass Fiber Felt Thermal Insulation |
| ASTM C 1096-1991 | 石棉水泥中木纤维含量的测定方法 | Test Method for Determination of Wood Fiber in Asbestos Cement |
| ASTM C 1101/C 1101M-2006 | 绝热矿物纤维毡及板挠性或刚性分类的标准试验方法 | Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation |
| ASTM C 1104/C 1104M-2000 | 测定未覆面矿物纤维绝缘材料蒸汽的吸收率的标准试验方法 | Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation |
| ASTM C 1116/C 1116M-2006 | 纤维加固混凝土的标准规范 | Standard Specification for Fiber-Reinforced Concrete |
| ASTM C 1139-1990 | 军事用玻璃纤维绝热和隔音用覆盖层和板 | Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications |
| ASTM C 1149-2006 | 自支撑喷涂纤维素质绝热材料的标准规范 | Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation |
| ASTM C 1154-2006 | 无石棉的纤维增强水泥制品的标准术语 | Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products |
| ASTM C 1177/C 1177M-2006 | 用作防水层的玻璃纤维衬垫石膏基底标准规范 | Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing |
| ASTM C 1178/C 1178M-2006 | 涂玻璃纤维衬垫防水石膏背板的标准规范 | Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel |
| ASTM C 1185-2003 | 无石棉纤维水泥平面薄板、屋面板、侧墙面板和护墙板取样和试验用标准试验方法 | Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards |
| ASTM C 1186-2007 | 平面无石棉的纤维水泥薄板的标准规范 | Standard Specification for Flat Non-Asbestos Fiber-Cement Sheets |
| ASTM C 1225-2004 | 无石棉纤维水泥屋面板、盖屋板和石板瓦的标准规范 | Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates |
| ASTM C 1228-1996 | 玻璃纤维增强混凝土的挠性及冲洗试验用试样的制备标准实施规程 | Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete |
| ASTM C 1229-1994 | 玻璃纤维增强混凝土中玻璃纤维含量测定的标准试验方法(冲洗试验) | Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test) |
| ASTM C 1230-1996 | 玻璃纤维增强混凝土焊接区的拉伸性能试验的标准试验方法 | Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads |
| ASTM C 1275-2000 | 室温下用实心矩形截面试样进行连续纤维增强高级陶瓷恒定抗拉性能的标准试验方法 | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature |
| ASTM C 1278/C 1278Ma-2007 | 纤维强化石膏板用标准规范 | Standard Specification for Fiber-Reinforced Gypsum Panel |
| ASTM C 1288-1999 | 单块非石棉纤维水泥内衬底薄板的标准规范 | Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets |
| ASTM C 1290-2006 | 外部隔热HVAC导管用柔性纤维玻璃毡隔热材料的标准规范 | Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts |
| ASTM C 1292-2000 | 室温下连续纤维增强高级陶瓷剪切强度的标准试验方法 | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM C 1320-2005 | 轻型框架结构用矿物纤维毛层和隔热毯的标准安装规程 | Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction |
| ASTM C 1325-2004 | 纤维毡增强的无石棉水泥内衬薄板的标准规范 | Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cement Substrate Sheets |
| ASTM C 1335-2004 | 人造岩石和炉渣矿物纤维隔热材料的非纤维质含量测量用的标准试验方法 | Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation |
| ASTM C 1336-1996 | 夹杂渗渣的纤维非氧化陶瓷增强样品的标准操作 | Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions |
| ASTM C 1337-1996 | 高温抗拉载荷下连续纤维增强陶瓷合成物的蠕变和蠕变断裂的标准试验方法 | Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures |
| ASTM C 1341-2006 | 连续纤维增强高级陶瓷合成物的弯曲特性的标准试验方法 | Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites |
| ASTM C 1355/C 1355M-1996 | 玻璃纤维增强石膏成份的标准规范 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM C 1358-2005 | 室温下带实心矩形截面试样的连续纤维增强高级陶瓷的单值抗压强度试验的标准试验方法 | Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures |
| ASTM C 1359-2005 | 高温下带实心矩形截面试样的连续纤维增强高级陶瓷的单值抗拉强度试验的标准试验方法 | Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures |
| ASTM C 1360-1996 | 室温下连续纤维增强高级陶瓷的等高度、轴向的和双向拉伸循环疲劳强度的标准规程 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures |
| ASTM C 1381-1997 | 模制玻璃纤维增强石膏部件的标准规范 | Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1393a-2000 | 管子和容器用垂直向矿物纤维薄板卷和薄板热绝缘的标准规范 | Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks |
| ASTM C 1399a-2007 | 获得纤维增强混凝土的平均残余强度的标准试验方法 | Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete |
| ASTM C 1425-2005 | 高温下1-D和2-D连续纤维增强高级陶瓷层间剪切强度测定的标准试验方法 | Standard Test Method for Interlaminar Shear Strength of 1-D and 2-D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures |
| ASTM C 1447/C 1447M-2004 | 非石棉纤维水泥地下排水管的标准规范 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM C 1448/C 1448M-2005 | 无石棉纤维水泥导管的标准规范 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| ASTM C 1449/C 1449Ma-2005 | 无石棉的纤维水泥制常压下水管的标准规范 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ASTM C 1450/C 1450M-2004 | 非石棉纤维水泥排雨水管的标准规范 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM C 1459-2004 | 无石棉纤维增强水泥盖屋板、屋顶板和屋面石板系统的性能的标准规范 | Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems |
| ASTM C 1467/C 1467M-2000 | 模制玻璃纤维增强石膏部件安装的标准规范 | Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1468-2006 | 室温下连续纤维增强高级陶瓷转换厚度抗拉强度的标准试验方法 | Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature |
| ASTM C 1488-2004 | 纤维素疏松填充绝缘材料模拟老化的标准实施规程 | Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation |
| ASTM C 1497-2004 | 纤维素纤维稳定热绝缘材料标准规范 | Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation |
| ASTM C 1511-2004 | 玻璃纤维绝缘材料(飞行器型)的水分保持(抵抗性)特征测定的标准试验方法 | Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type) |
| ASTM C 1530-2004 | 设计成可变轮廓和厚度的无石棉纤维水泥屋顶盖板、屋面板和石板的标准规范 | Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses |
| ASTM C 1550-2005 | 纤维增强混凝土挠曲韧性的标准试验方法(利用中心负载圆形板) | Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel) |
| ASTM C 1557-2003 | 纤维的抗拉强度及杨氏模量的标准试验方法 | Standard Test Method for Tensile Strength and Young's Modulus of Fibers |
| ASTM C 1559-2004 | 玻璃纤维衬垫绝缘材料芯吸性测定的标准试验方法(飞行器类型) | Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type) |
| ASTM C 1560-2003 | 玻璃纤维增强的水泥基混合物的热水加速老化的标准试验方法 | Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites |
| ASTM C 1574-2004 | 喷射松填充矿物纤维热绝缘材料膨胀密度测定的标准指南 | Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation |
| ASTM C 1579-2006 | 限制纤维加筋混凝土的塑料收缩破裂评定的标准试验方法（用一个钢格子插入物） | Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) |
| ASTM C 1609/C 1609M-2006 | 纤维增强混凝土的弯曲性能的标准试验方法(用三点支梁负荷法) | Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) |
| ASTM C 1629/C 1629M-2006 | 抗机械损伤的未装饰的内部石膏板产品和纤维加强水泥板的标准分类 | Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels |
| ASTM C 1658/C 1658M-2006 | 玻璃纤维石膏板的标准规范 | Standard Specification for Glass Mat Gypsum Panels |
| ASTM C 1666/C 1666M-2007 | 玻璃纤维增强水泥(GFRC)和纤维增强混凝土及水泥用耐碱(AR)玻璃纤维的标准规范 | Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement |
| ASTM C 195-2000 | 矿物纤维隔热水泥的标准规范 | Standard Specification for Mineral Fiber Thermal Insulating Cement |
| ASTM C 208-1995 | 纤维质纤维隔热板标准规范 | Standard Specification for Cellulosic Fiber Insulating Board |
| ASTM C 209a-2007 | 纤维质纤维绝热板用标准试验方法 | Standard Test Methods for Cellulosic Fiber Insulating Board |
| ASTM C 336-1971 | 用纤维伸长法测定玻璃的软化点和应变点的试验方法 | Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation |
| ASTM C 449/C 449M-2000 | 矿物纤维水硬化隔热水泥和精细水泥的标准规范 | Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement |
| ASTM C 458-1998 | 石棉水泥制品中有机纤维含量的标准试验方法 | Standard Test Method for Organic Fiber Content of Asbestos-Cement Products |
| ASTM C 547-2007 | 矿物纤维管绝缘的标准规范 | Standard Specification for Mineral Fiber Pipe Insulation |
| ASTM C 551-1998 | 石棉水泥纤维绝缘板标准规范 | Standard Specification for Asbestos-Cement Fiberboard Insulating Panels |
| ASTM C 553-2002 | 商用和工业用矿物纤维毡隔热的标准规范 | Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications |
| ASTM C 581-2003 | 液体设备用的玻璃纤维增强结构用热固性树脂耐化学腐蚀性测定的标准实施规范 | Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service |
| ASTM C 592-2004 | 矿物纤维毡隔热材料和毡型管隔热材料(工业型,金属网覆盖的)标准规范 | Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 612-2004 | 隔热的矿物纤维块材和板材标准规范 | Standard Specification for Mineral Fiber Block and Board Thermal Insulation |
| ASTM C 653-1997 | 建筑物隔热用低密度矿物纤维毡阻热系数的测定的标准指南 | Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation |
| ASTM C 665-2006 | 轻型结构和人造框架用矿质纤维毡绝热材料标准规范 | Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing |
| ASTM C 667-1992 | 环境温度空气以上管道操作和设备的预制纤维反射绝缘的标准规范 | Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air |
| ASTM C 686-1990 | 矿质纤维绒及毡式绝热材料的分离强度的标准试验方法 | Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation |
| ASTM C 720-1989 | 升温用的喷制纤维绝热材料的规格 | Spray-Applied Fibrous Thermal Insulation for Elevated Temperature |
| ASTM C 725-1990 | 半密实的矿物纤维板壁规格 | Semidense Mineral Fiber Siding |
| ASTM C 726-2005 | 屋面用矿物纤维绝缘板标准规范 | Standard Specification for Mineral Fiber Roof Insulation Board |
| ASTM C 739b-2005 | 纤维素纤维疏松填充绝热材料的标准规范 | Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation |
| ASTM C 762-1986 | 高温下用喷制纤维热绝缘材料应用规程 | Application of Spray-Applied Fibrous Thermal Insulation for Elevated Temperatures |
| ASTM C 764a-2006 | 矿物纤维疏松填充热绝缘材料的标准规范 | Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation |
| ASTM C 800-2005 | 玻璃纤维毡绝热材料(飞机型)的标准规范 | Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type) |
| ASTM C 846-1994 | 樯护蔽用绝热纤维板的应用程序的标准实施规程 | Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing |
| ASTM C 892-2005 | 高温纤维毡绝热的标准规范 | Standard Specification for High-Temperature Fiber Blanket Thermal Insulation |
| ASTM C 947-2003 | 薄剖面玻璃纤维增强混凝土挠曲特性的试验方法(使用1/3跨度点荷载的简支梁) | Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) |
| ASTM C 948-1981 | 玻璃纤维增强混凝土薄片的干和湿体密度、吸水率和表观孔隙率的试验方法 | Test Method for Dry and Wet Bulk Density, Water Absorption and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete |
| ASTM C 991-2003 | 金属建筑物用挠性玻璃纤维绝缘材料标准规范 | Standard Specification for Flexible Glass Fiber Insulation for Metal Buildings |
| ASTM C 995-1994 | 通过翻转的坍落度筒测定纤维增强混凝土流动时间的标准试验方法 | Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone |
| ASTM D 1030-1995 | 纸和纸板纤维分析的标准试验方法 | Standard Test Method for Fiber Analysis of Paper and Paperboard |
| ASTM D 1037a-2006 | 木质纤维和碎料板材料性能评估的标准试验方法 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 1060-1996 | 为测定净毛纤维百分率从成包原毛中心取样的标准规程 | Standard Practice for Core Sampling of Raw Wool in Packages for Determination of Percentage of Clean Wool Fiber Present |
| ASTM D 1118-1995 | 石棉纤维和石棉织物磁参数的标准测试方法 | Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles |
| ASTM D 1233-1988 | 韧皮纤维和叶纤维制双股线 | Twine Made from Bast and Leaf Fibers |
| ASTM D 1282-2005 | 用气流阻力表示羊毛毛条、生条和洗净羊毛的平均纤维直经的标准试验方法 | Standard Test Method for Resistance to Airflow as an Indication of Average Fiber Diameter of Wool Top, Card Sliver, and Scoured Wool |
| ASTM D 1294-2005 | 1英寸(25.4毫米)规准长度羊毛纤维束的拉伸强度和断裂强度的标准试验方法 | Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length |
| ASTM D 1343-1995 | 用落球法测定纤维素衍生物粘度的标准试验方法 | Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method |
| ASTM D 1348-1994 | 纤维素中湿度的标准测试方法 | Standard Test Methods for Moisture in Cellulose |
| ASTM D 1439-2003 | 羧甲基纤维素钠盐的标准试验方法 | Standard Test Methods for Sodium Carboxymethylcellulose |
| ASTM D 1440-2007 | 棉花纤维的长度和长度分布的标准试验方法(列阵法) | Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method) |
| ASTM D 1441-2006 | 试验用棉纤维取样的标准操作规程 | Standard Practice for Sampling Cotton Fibers for Testing |
| ASTM D 1442-2006 | 棉纤维成熟度的标准试验方法(烧碱膨胀与偏振光法) | Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures) |
| ASTM D 1445-2005 | 棉纤维的断裂强度和伸长率的标准试验方法(扁纤维束法) | Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method) |
| ASTM D 1447-2000 | 用纤维照影机测量法测定棉纤维的长度和长度均匀度的标准试验方法 | Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement |
| ASTM D 1448-2005 | 棉纤维的马克隆尼读数的标准试验方法 | Standard Test Method for Micronaire Reading of Cotton Fibers |
| ASTM D 1554-2001 | 与木基纤维和刨花板材料相关的标准术语 | Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials |
| ASTM D 1562-2005 | 纤维素醋酸酯丙酸酯模制和挤制化合物的标准规范 | Standard Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds |
| ASTM D 1574-2004 | 羊毛和其它动物纤维中可萃取物的标准试验方法 | Standard Test Method for Extractable Matter in Wool and Other Animal Fibers |
| ASTM D 1575-1990 | 洗净羊毛及生条中羊毛纤维长度的测试方法 | Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver |
| ASTM D 1577-2007 | 纺织纤维线密度的标准试验方法 | Standard Test Methods for Linear Density of Textile Fibers |
| ASTM D 1668a-1997 | 屋顶和防水用玻璃纤维织物(机织并经处理)的标准规范 | Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing |
| ASTM D 1695-2007 | 纤维素和纤维素诱导生成物标准术语 | Standard Terminology of Cellulose and Cellulose Derivatives |
| ASTM D 1696-1995 | 纤维素在氢氧化钠中溶解度的标准试验方法 | Standard Test Method for Solubility of Cellulose in Sodium Hydroxide |
| ASTM D 1720-2003 | 硝酸纤维素溶液中活性溶剂稀释比的标准试验方法 | Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions |
| ASTM D 1770-1994 | 羊毛条中毛结,植物性物质与有色纤维含量标准测试方法 | Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top |
| ASTM D 1774-1994 | 纺织品纤维弹性特性的测试方法 | Test Methods for Elastic Properties of Textile Fibers |
| ASTM D 1795-1996 | 纤维素固有粘度的标准试验方法 | Standard Test Method for Intrinsic Viscosity of Cellulose |
| ASTM D 1874-1962 | 纤维板船运箱顶盖自动机密封用水可溶或溶剂可溶的液体胶粘剂 | Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases |
| ASTM D 1909-2004 | 纺织纤维商业公定回潮率标准表 | Standard Table of Commercial Moisture Regains for Textile Fibers |
| ASTM D 1926-2000 | 纤维素羧基含量的测试方法 | Standard Test Methods for Carboxyl Content of Cellulose |
| ASTM D 1974-1998 | 纤维板箱封口、密封及加固方法的标准实施规范 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| ASTM D 1996-1997 | 用液相色谱法(LC)测定低浓度聚乙烯中酚醛抗氧剂和棕榈纤维酰胺润滑添加剂的试验方法 | Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) |
| ASTM D 1997-1991 | 用干燥物质作泥炭样品纤维含量的试验室测定的测试方法 | Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass |
| ASTM D 2102-2002 | 织物纤维收缩性的标准试验方法 | Standard Test Method for Shrinkage of Textile Fibers (Bundle Test) |
| ASTM D 2105-2001 | 玻璃纤维增强热固树脂管纵向抗张特性的标准试验方法 | Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube |
| ASTM D 2130-1990 | 显微投影法测定羊毛和其它动物纤维直径的标准试验方法 | Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection |
| ASTM D 2165-1994 | 羊毛及类似动物纤维的水萃取物pH值的标准测试方法 | Standard Test Method for pH of Aqueous Extracts of Wool and Similar Animal Fibers |
| ASTM D 2291-2003 | 玻璃纤维树脂复合物用环形试样制作的标准实施规范 | Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites |
| ASTM D 2310-2006 | 机制的玻璃纤维增强热固树脂管的标准分类方法 | Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 2343-2003 | 增强塑料用玻璃纤维单纱、纱线和粗纱抗拉特性的标准试验方法 | Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics |
| ASTM D 2363-1979 | 羟基丙基甲基纤维素的标准试验方法 | Standard Test Methods for Hydroxypropyl Methylcellulose |
| ASTM D 2364-2001 | 羟基乙基纤维素的标准试验方法 | Standard Test Methods for Hydroxyethylcellulose |
| ASTM D 2402-2007 | 纺织纤维的保水性用标准试验方法(离心机法) | Standard Test Method for Water Retention of Textile Fibers (Centrifuge Procedure) |
| ASTM D 2494-2002 | 纱线或人造纤维或纤维束货包的商业质量的标准试验方法 | Standard Test Method for Commercial Mass of a Shipment of Yarn or Manufactured Staple Fiber or Tow |
| ASTM D 2497-2007 | 人造有机纤维长丝单纱用标准公差 | Standard Tolerances for Manufactured Organic-Base Filament Single Yarns |
| ASTM D 2524-1995 | 毛纤维抗断裂强度的试验方法.平列纤维束法.1/8英寸(3.2毫米)规范长度的标准试验方法 | Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method- 1/8-in. (3.2-mm) Gage Length |
| ASTM D 2563-1994 | 玻璃纤维增强塑料层压零件中可见缺陷分类的标准操作规程 | Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts |
| ASTM D 2589-1988 | 石棉纤维的麦克涅特湿法分类的标准试验方法 | Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber |
| ASTM D 2612-1999 | 静态试验条件下纱条和毛条中纤维粘附力的标准试验方法 | Standard Test Method for Fiber Cohesion in Sliver and Top in Static Tests |
| ASTM D 2641-1989 | 纤维素中氯的测试方法 | Test Method for Chlorine in Cellulose |
| ASTM D 2658-2004 | 测定纤维板盒内部尺寸的标准试验方法(箱形量规法) | Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method) |
| ASTM D 2752-1988 | 石棉纤维透气性的标准试验方法 | Standard Test Methods for Air Permeability of Asbestos Fibers |
| ASTM D 276a-2000 | 识别纺织品中纤维的标准试验方法 | Standard Test Methods for Identification of Fibers in Textiles |
| ASTM D 2824-2006 | 无纤维增强、石棉纤维增强和无石棉的纤维增强的填充铝颜料的沥青屋面涂层标准规范 | Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos |
| ASTM D 2839-2005 | 利用熔体指数纤维测定聚乙烯密度的标准实施规程 | Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene |
| ASTM D 2860-1990 | 90度角和固定应力条件下压合带与纤维板的粘着性的试验方法 | Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Degree Angle and Constant Stress |
| ASTM D 2860/D 2860M-2004 | 在90角度和恒定应力下纤维板上压敏胶纸带粘合性的标准试验方法 | Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress |
| ASTM D 2925-2001 | 在满管水流情况下玻璃纤维增强热固树脂管射束偏转的标准试验方法 | Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ASTM D 2929-1989 | 用X射线荧光法测定纤维素材料中硫含量的标准试验方法 | Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence |
| ASTM D 2947-1988 | 石棉纤维筛选分析的试验方法 | Test Method for Screen Analysis of Asbestos Fibers |
| ASTM D 2968-1995 | 用显微投影法测定羊毛和其它动物纤维中的有髓纤维和死毛纤维的标准试验方法 | Standard Test Method for Med and Kemp Fibers in Wool and Other Animal Fibers by Microprojection |
| ASTM D 2970/D 2970M-2004 | 玻璃长纤维制轮胎帘线、轮胎帘布和工业用纱的标准试验方法 | Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments |
| ASTM D 2987-1988 | 石棉纤维水分含量的标准测试方法 | Standard Test Method for Moisture Content of Asbestos Fiber |
| ASTM D 2992-2006 | 玻璃纤维(增强的热固树脂玻璃纤维)管及配件用液体静压设计基础标准实施规程 | Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings |
| ASTM D 2996-2001 | 纤维缠绕"纤维玻璃"(玻璃纤维增强热固性树脂管)标准规范 | Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 2997-2001 | 离心铸造"纤维玻璃"(玻璃纤维增强的热固性树脂)管的标准规范 | Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 301-1995 | 可溶性硝化纤维素的标准试验方法 | Standard Test Methods for Soluble Cellulose Nitrate |
| ASTM D 3019-1994 | 用于无纤维增强、石棉纤维增强和无石棉的纤维增强沥青屋顶卷材的搭接胶粘剂标准规范 | Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non Fibered, Asbestos Fibered, and Non Asbestos Fibered |
| ASTM D 3025-2007 | 利用校正棉花标准化棉花纤维试验结果的标准实施规范 | Standard Practice for Standardizing Cotton Fiber Test Results by Use of Calibration Cotton Standards |
| ASTM D 3133-2001 | 用红外线光谱测定法对醇酸天然漆中硝酸纤维素定量测定的标准试验方法 | Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry |
| ASTM D 3135-1987 | 粘合的、熔凝纤维的及叠层衣料的性能 | Performance of Bonded, Fused and Laminated Apparel Fabrics |
| ASTM D 3171-2006 | 用基质溶解法测定树脂基质混合物中纤维含量的标准试验方法 | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM D 3217-2007 | 环圈结或打结的人造纺织纤维断裂强度标准试验方法 | Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations |
| ASTM D 3218-2007 | 聚烯烃单纤维丝标准规范 | Standard Specification for Polyolefin Monofilaments |
| ASTM D 3262-2006 | 玻璃纤维增强热固性树脂污水管的标准规范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ASTM D 3277-1995 | 经油浸渍的纤维素绝缘材料含水量的标准试验方法 | Standard Test Methods for Moisture Content of Oil-Impregnated Cellulosic Insulation |
| ASTM D 3299-2000 | 纤维缠绕的玻璃纤维增强热固树脂耐腐蚀容器的标准规范 | Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 3333-2007 | 纺纱用人造短纤维、长纤维或亚麻短纤维试验取样标准实施规范 | Standard Practice for Sampling Manufactured Staple Fibers, Sliver, or Tow for Testing |
| ASTM D 3345-1974 | 木材及其他纤维素材料防白蚁破坏的实验室评定方法 | Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ASTM D 3353-2004 | 纤维绝缘磁性金属丝的标准试验方法 | Standard Test Methods for Fibrous-Insulated Magnet Wire |
| ASTM D 3512-2005 | 纺织物纤维的抗起球性及其它相关表面变化的标准试验方法:无序转筒起球试验器 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester |
| ASTM D 3513-2002 | 人造短纤维中超长纤维含量的标准测试方法 | Standard Test Method for Overlength Fiber Content of Manufactured Staple Fiber |
| ASTM D 3514-2005 | 纺织物纤维的抗起球性及其它相关表面变化的标准试验方法:弹性护垫 | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Elastomeric Pad |
| ASTM D 3516-1989 | 灰化纤维素的标准试验方法 | Standard Test Methods for Ashing Cellulose |
| ASTM D 3517-2006 | 玻璃纤维增强热固性树脂压力管的标准规范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe |
| ASTM D 3529/D 3529M-1997 | 碳纤维环氧树脂预浸渍中树脂固定含量的标准测试方法 | Standard Test Method for Resin Solids Content of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3531-1999 | 碳纤维环氧树脂预浸料坯的树脂流动性标准试验方法 | Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3532-1999 | 碳纤维环氧树脂预浸料坯凝固时间的标准试验方法 | Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg |
| ASTM D 3552-1996 | 纤维增强金属基复合材料的拉伸性能用标准试验方法 | Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites |
| ASTM D 365-2001 | 可溶性硝酸纤维素基溶液的标准指南 | Standard Guide for Soluble Nitrocellulose Base Solutions |
| ASTM D 3656-2004 | 涂乙烯的玻璃纤维纱编织的防虫罩及排气孔遮布的标准规范 | Standard Specification for Insect Screening and Louver Cloth Woven fromVinyl-Coated Glass Yarns |
| ASTM D 3681-2006 | 在偏转条件下玻璃纤维(玻璃纤维增强热固树脂)管的耐化学腐蚀的标准试验方法 | Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
| ASTM D 3753-2005 | 玻璃纤维增强聚酯检查孔和导水井的标准规范 | Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells |
| ASTM D 3754-2006 | 玻璃纤维增强热固性树脂污水压力管和工业压力管的标准规范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe |
| ASTM D 3800-1999 | 高模数纤维密度的标准试验方法 | Standard Test Method for Density of High-Modulus Fibers |
| ASTM D 3822-2007 | 单支纺织品纤维张力性能的标准试验方法 | Standard Test Method for Tensile Properties of Single Textile Fibers |
| ASTM D 3839-2002 | 玻璃纤维增强热固树脂管地下安装的标准指南 | Standard Guide for Underground Installation of "Fiberglass" (Glass-FiberReinforced Thermosetting-Resin) Pipe |
| ASTM D 3840-2001 | 无压设备用玻璃纤维增强热固树脂管配件标准规范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications |
| ASTM D 3841-1997 | 玻璃纤维增强聚酯板标准规范 | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
| ASTM D 3876-1996 | 气相色谱法测定纤维素乙醚制品中甲氧基和羟丙基取代物的标准试验方法 | Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography |
| ASTM D 3914-2002 | 挤拉制玻璃纤维增强塑料棒平面剪切强度的标准测试方法 | Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod |
| ASTM D 3916-2002 | 挤拉制玻璃纤维增强塑料棒抗拉特性的标准试验方法 | Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod |
| ASTM D 3917-1996 | 热固性玻璃纤维增强塑料挤拉制型材尺寸公差的标准规范 | Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes |
| ASTM D 3937-2007 | 纺纱用人造短纤维卷曲率的标准试验方法 | Standard Test Method for Crimp Frequency of manufactured Staple Fibers |
| ASTM D 3971-1989 | 纤维素中二氯甲烷可溶物的标准试验方法 | Standard Test Method for Dichloromethane-Soluble Matter in Cellulose |
| ASTM D 3982-2003 | 接触模压制玻璃纤维增强热固性树脂管和防护罩标准规范 | Standard Specification for Contact Molded "Fiberglass" (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods |
| ASTM D 4018-1999 | 碳及石墨纤维束的连续长丝抗拉特性的标准试验方法 | Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows |
| ASTM D 4024-2005 | 机制"纤维玻璃"(玻璃纤维增强的热固性树脂)法兰的标准规范 | Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 4028-1996 | 涂乙烯的纤维玻璃纱编的日光罩的标准规范 | Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn |
| ASTM D 4030-2004 | 玻璃纤维绳和缝纫线的标准规范 | Standard Specification for Glass Fiber Cord and Sewing Thread |
| ASTM D 4085-1993 | 原子吸收分光光度计对纤维素中金属的试验方法 | Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry |
| ASTM D 4097-2001 | 接触模压的玻璃纤维增强热固树脂耐腐蚀罐标准规范 | Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks |
| ASTM D 4102-1982 | 碳纤维的耐热氧化性的试验方法 | Test Method for Thermal Oxidative Resistance of Carbon Fibers |
| ASTM D 4120-2007 | 动态试验下粗纱、纱条和毛条的纤维粘附力用标准试验方法 | Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests |
| ASTM D 4161-2001 | 使用挠性弹性体密封件的"玻璃钢"(玻璃纤维增强热固树脂)管接头标准规范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals |
| ASTM D 4167-1997 | 纤维增强的塑料风扇和风机 | Standard Specification for Fiber-Reinforced Plastic Fans and Blowers |
| ASTM D 4209-2007 | 纤维素、乳化液、树脂溶液、虫漆和清漆的挥发物和非挥发物含量的测定用标准实施规程 | Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes |
| ASTM D 4250-1992 | 吸水纤维制品蓄水能力的试验方法 | Test Method for Water-Holding Capacity of Bibulous Fibrous Products |
| ASTM D 4330-1994 | 玻璃纤维船抛光剂和蜡评定的标准实施规程 | Standard Practice for Evaluation of Fiberglass Boat Polish and Wax |
| ASTM D 4354-1999 | 试验用土工合成纤维织物的抽样的标准操作规程 | Standard Practice for Sampling of Geosynthetics for Testing |
| ASTM D 4398-2007 | 用板单面曝光法测定玻璃纤维增强热固树脂的耐化学性的标准试验方法 | Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure |
| ASTM D 4466-2002 | 多成分纺织纤维的标准术语 | Standard Terminology for Multicomponent Textile Fibers |
| ASTM D 4476-2003 | 纤维增强挤拉制塑料棒弯曲性能的标准试验方法 | Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods |
| ASTM D 4510-2005 | 羊毛和其他动物纤维中粒子分裂计数的标准试验方法 | Standard Test Method for Counting Particle Cleavages in Wool and Other Animal Fibers |
| ASTM D 4601-2004 | 屋面用沥青覆层的玻璃纤维基薄板的标准规范 | Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing |
| ASTM D 4604-1995 | 高容量仪器测量棉纤维的标准试验方法(运动控制纤维信息系统) | Standard Test Methods for Measurement of Cotton Fibers by High Volume Instruments (HVI) (Motion Control Fiber Information System) |
| ASTM D 4727/D 4727M-2007 | 波纹和实心纤维板坯料(包装级)和切制形状的标准规范 | Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes |
| ASTM D 4770-2000 | 评定用于充填外衣的人造纤维棉絮的标准试验方法 | Standard Test Method for Appearance and Integrity of Highloft Battting After Refurbishing |
| ASTM D 4771-2002 | 室内家具编织装饰用纤维的标准性能规范 | Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture |
| ASTM D 4794-1994 | 用气相色谱法测定纤维素醚产品中羟乙基替代物的标准试验方法 | Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography |
| ASTM D 4795-1994 | 可溶行硝化纤维素中氮含量的标准试验方法.交替法 | Standard Test Method for Nitrogen Content of Soluble Nitrocellulose - Alternative Method |
| ASTM D 4849b-2002 | 与纱和纤维相关的标准术语 | Standard Terminology Relating to Yarns and Fibers |
| ASTM D 4881-2005 | 漆包纤维或薄膜缠绕磁线的耐热性标准试验方法 | Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire |
| ASTM D 4897-2001 | 屋面材料用沥青涂覆玻璃纤维通风薄基板标准规范 | Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing |
| ASTM D 4900-1999 | 鞣皮提取物中木质磺酸盐(亚硫酸盐纤维素)的标准试验方法 | Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts |
| ASTM D 4907-2000 | 皮革精制中硝化纤维素的标准试验方法 | Standard Test Method for Nitrocellulose in Finish on Leather |
| ASTM D 4911-1994 | 平行精纺式开良精纺系统中手工织短纤维纱线的公差 | Tolerances for Man-Made Yarns Spun on the Parallel Worsted or Modified Worsted System |
| ASTM D 4970-2005 | 纺织纤维品的耐起球和其他相关表面变化的标准试验方法(马丁戴尔压力检验机法) | Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester) |
| ASTM D 5035-2006 | 纺织纤维的伸长率和断裂力的标准试验方法（剥离法） | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) |
| ASTM D 5103-2007 | 人造短纤维的长度和长度分布用标准试验方法(单纤维试验) | Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test) |
| ASTM D 5104-2002 | 纺织纤维收缩的标准试验方法(单纤维试验) | Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test) |
| ASTM D 5117-2003 | 固体玻璃纤维增强挤拉制坯料的染料渗透性标准试验方法 | Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock |
| ASTM D 5118/D 5118Ma-2005 | 纤维板货运箱制造的标准实施规程 | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| ASTM D 5168-2003 | 三层波纹纤维板集装箱的制造和封闭的标准操作规程 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
| ASTM D 519-2004 | 羊毛条中纤维长度的标准试验方法 | Standard Test Method for Length of Fiber in Wool Top |
| ASTM D 5319-1997 | 玻璃纤维增强聚酯墙和顶棚镶板的标准规范 | Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
| ASTM D 5330/D 5330M-2006 | 包装用的纤维增强压敏包装带的标准规范 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced |
| ASTM D 5359-1998 | 用于玻璃纤维的从废物中回收的碎玻璃的标准规范 | Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber |
| ASTM D 5364-1993 | 燃煤单位玻璃纤维增强塑料烟囱衬里的设计,制造及安装标准导则 | Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units |
| ASTM D 5365-2006 | "玻璃钢"(玻璃纤维增强热固树脂)管长期环状弯曲应变的标准试验方法 | Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 5400-2003 | 羟基丙基纤维素标准试验方法 | Standard Test Methods for Hydroxypropylcellulose |
| ASTM D 5421-2005 | 接触模制玻璃纤维(玻璃-纤维-增强热固性树脂)法兰的标准规范 | Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 5528-2001 | 单向纤维增强聚合母体复合材料I型层间断裂韧性的标准试验方法 | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 5573-1999 | 纤维增强塑料(FRP)接合中失效方式分类的标准操作规程 | Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM D 5639/D 5639M-2005 | 根据性能要求对波纹状纤维板材料和箱结构进行选择的标准试验方法 | Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements |
| ASTM D 5651a-1995 | 木质纤维和碎料人造板表面粘结强度的标准试验方法 | Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 5677-2005 | 用于航空喷气涡轮机燃料管线的胶粘剂结合型玻璃纤维(玻璃纤维增强热固性树脂)管及管配件标准规范 | Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ASTM D 5685-2005 | "玻璃纤维"(玻璃-纤维-增强热固树脂)压力管配件的标准规范 | Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings |
| ASTM D 5722-2003 | 用集中自然光和浸水-冻结-解冻程序进行工厂涂覆压花纤维板室外加速风化的标准规程 | Standard Practice for Performing Accelerated Outdoor Weathering of Factory- Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure |
| ASTM D 578-2005 | 玻璃纤维丝标准规范 | Standard Specification for Glass Fiber Strands |
| ASTM D 5795-1995 | 硬质纤维板和其它混合板的吸水率测定的标准试验方法 | Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via "Cobb Ring" Apparatus |
| ASTM D 580-2004 | 坯布机织玻璃纤维带的标准规范 | Standard Specification for Greige Woven Glass Tapes and Webbings |
| ASTM D 581-2007 | 机织玻璃纤维套管的标准规范 | Standard Specification for Glass Fiber Greige Braided Tubular Sleeving |
| ASTM D 5824-1998 | 纤维板暴露在热和水条件下粘结强度测定的标准试验方法 | Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 585-1997 | 纸张、纸板、纤维板和相关产品的单批取样和验收标准实施规程 | Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
| ASTM D 5866-2005 | 对棉纤维中棉结的标准试验方法(AFIS-N仪器) | Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument) |
| ASTM D 5867-2005 | 用大容量仪器测量棉纤维物理性能的标准试验方法 | Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments |
| ASTM D 5868-2001 | 纤维增强塑料粘结剂的边缘剪切粘着性标准试验方法 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 5896-1996 | 纤维素材料碳水化合物分配的标准试验方法 | Standard Test Method for Carbohydrate Distribution of Cellulosic Material |
| ASTM D 5897-1996 | 电位滴定转换法测定纤维素酯中羟基百分率的标准试验方法 | Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration-Alternative Method |
| ASTM D 6041-1997 | 接触模制(玻璃纤维增强热固树脂)耐腐蚀管和配件标准规范 | Standard Specification for Contact-Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings |
| ASTM D 6042-2004 | 用液相色谱法对聚丙烯均聚物配方中酚醛抗氧化剂和酰胺纤维润滑添加剂测定的标准试验方法 | Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC) |
| ASTM D 6115-1997 | 单向纤维增强聚合基质复合物的模式1疲劳分层增长开始的标准试验方法 | Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 6162a-2000 | 使用聚合物和玻璃纤维增强材料结合的苯乙烯丁二烯苯乙烯(SBS)改良沥青层材料的标准规范 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 6163-2000 | 玻璃纤维增强的苯乙烯丁二烯苯乙烯(SBS)改良沥青层材料的标准规范 | Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements |
| ASTM D 6188-1997 | 通过铜氨落球对纤维素黏度的标准试验方法 | Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall |
| ASTM D 619-1999 | 电绝缘用硫化纤维的标准试验方法 | Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
| ASTM D 6223-2002 | 聚酯和玻璃纤维增强相结合的无规立构聚丙烯(APP)改良沥青片材的标准规范 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 6264-1998 | 与一集中的拟静态压痕力复合的纤维增强聚合物基质的耐破坏性测量的标准试验方法 | Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
| ASTM D 6298-2005 | 带工厂用金属表面的纤维玻璃增强苯乙烯-丁二烯-苯乙烯(SBS)改良沥青片的标准规范 | Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface |
| ASTM D 6415/D 6415Ma-2006 | 测量纤维增强型聚合母体高聚物的曲梁强度的标准试验方法 | Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite |
| ASTM D 6466-1999 | 用Sirolan激光扫描纤维直径分析仪测定羊毛和其它动物纤维直径的标准试验方法 | Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser |
| ASTM D 6477-2004 | 轮胎帘布、钢丝圈、软(筋)钢丝和纤维布的相关标准术语 | Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics |
| ASTM D 6500-2000 | 用光导纤维直径分析仪测定羊毛和其它动物纤维直径的标准试验方法 | Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser |
| ASTM D 6507-2000 | 复合材料用纤维增强定向规则的标准实施规程 | Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials |
| ASTM D 6509-2000 | 用玻璃纤维加筋法测定无规立构聚丙烯改良沥青基薄板材的标准规范 | Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements |
| ASTM D 6590/D 6590M-2000 | 密封纤维容器和罐用的压敏胶带的标准规范 | Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans |
| ASTM D 6613-2002 | 测定尼龙或聚脂纤维尺寸的标准实施规程 | Standard Practice for Determining the Presence of Sizing in Nylon or Polyester Fabric |
| ASTM D 6652-2001 | 测定无纺织物留下的纤维状碎屑的标准试验方法 | Standard Test Method for Determining Fibrous Debris From Nonwoven Fabrics |
| ASTM D 6671/D 6671M-2006 | 单向纤维增强聚合物基质复合物的混合模式I-模式II层间断裂韧性的标准试验方法 | Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites |
| ASTM D 6685-2001 | 纤维制混凝土用织物的试验方法的选择的标准指南 | Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete |
| ASTM D 6757-2007 | 陡斜屋顶用包含无机纤维的屋面衬垫毡的标准规范 | Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing |
| ASTM D 6856-2003 | 纤维增强"纺织"复合材料测试的标准指南 | Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials |
| ASTM D 6942-2003 | 碱性环境中纤维素纤维稳定性的标准试验方法 | Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments |
| ASTM D 6961-2003 | 亚麻纤维颜色测量标准试验方法 | Standard Test Method for Color Measurement of Flax Fiber |
| ASTM D 7018-2004 | 与玻璃纤维及其产品相关的标准术语 | Standard Terminology Relating to Glass Fiber and Its Products |
| ASTM D 7025a-2004 | 评估清洁亚麻纤维细度的标准试验方法 | Standard Test Method for Assessing Clean Flax Fiber Fineness |
| ASTM D 7030-2004 | 用压缩试验器测试恒定负荷下波面纤维板容器的短期蠕变性能的标准试验方法 | Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine |
| ASTM D 706-2005 | 乙酸纤维素模制和挤制化合物的标准规范 | Standard Specification for Cellulose Acetate Molding and Extrusion Compounds |
| ASTM D 707-2005 | 乙酸丁酸纤维素模制与挤制化合物的标准规范 | Standard Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds |
| ASTM D 710-1997 | 电绝缘用硫化纤维薄板、杆材和管标准规范 | Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation |
| ASTM D 7138-2007 | 测定合成纤维熔化温度的标准试验方法 | Standard Test Method to Determine Melting Temperature of Synthetic Fibers |
| ASTM D 7139-2005 | 棉纤维的标准术语 | Standard Terminology for Cotton Fibers |
| ASTM D 7154-2005 | 航空燃料冻结点的标准试验方法(自动纤维光学法) | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) |
| ASTM D 7200-2006 | 用相位比对显微镜和相位传输显微镜取样和计数矿场和采石场内的空气纤维(包含石棉纤维)的标准实施规程 | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy |
| ASTM D 7201-2006 | 用相位比对显微镜取样和计数车间内的空气纤维(包含石棉纤维)的标准实施规程 | Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with and Option of Transmission Electron Microscopy) |
| ASTM D 7205/D 7205M-2006 | 测量纤维增强聚合物基质复合棒拉伸特性的标准试验方法 | Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars |
| ASTM D 7291/D 7291M-2007 | 纤维增强聚合物复合材料沿厚度方向"平放朝上的"抗拉强度和弹性模数的标准试验方法 | Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material |
| ASTM D 7332/D 7332M-2007 | 测量纤维增强聚合物基复合材料紧固件耐拉伸性的标准试验方法 | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite |
| ASTM D 7337/D 7337M-2007 | 纤维增强聚合物基复合棒拉伸蠕变断裂的标准试验方法 | Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars |
| ASTM D 7357-2007 | 纤维加筋混凝土用纤维素纤维的标准规范 | Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete |
| ASTM D 7367-2007 | 液压栽培用纤维覆盖料持水能力的测定用标准试验方法 | Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting |
| ASTM D 787-1996 | 乙基纤维模制和挤压化合物的标准规范 | Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds |
| ASTM D 817-1996 | 乙酸丙酸纤维素和醋酸丁酸纤维素的标准试验方法 | Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate |
| ASTM D 861-1995 | 用特克斯制命名纤维,纱的半制品,纱和其它纺织品线度的标准操作规程 | Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns |
| ASTM D 871-1996 | 测试乙酸纤维素的试验方法 | Test Methods of Testing Cellulose Acetate |
| ASTM D 885-2007 | 人造有机纤维制成的轮胎帘线、轮胎帘布和工业长丝纱的标准试验方法 | Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers |
| ASTM D 902-2006 | 电绝缘用柔性涂树脂玻璃布和玻璃纤维绝缘带的标准试验方法 | Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
| ASTM D 914-2000 | 乙基纤维的标准试验方法 | Standard Test Methods for Ethylcellulose |
| ASTM E 1067-2007 | 玻璃纤维增强塑料树脂(FRP)罐/容器的声排放检验用标准实施规程 | Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels |
| ASTM E 1309-2000 | 数据库中纤维增强聚合物复合材料的识别的标准指南 | Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
| ASTM E 1434-2000 | 记录数据库中纤维增强复合材料的机械试验数的标准指南 | Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases |
| ASTM E 1471-1992 | 计算机处理的材料性能数据库中纤维、填充料和磁心材料的识别 | Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases |
| ASTM E 1576-1999 | 在空气碳化硅晶须和纤维的环境中工作的工作人员的医疗监督计划的标准指南 | Standard Guide for Medical Surveillance Program for Workers with Occupational Exposure to Respirable Silicon Carbide Whiskers |
| ASTM E 1888/E 1888M-2007 | 带轻质木心由玻璃纤维增强塑料制成的压力容器声音发出检验用标准实施规程 | Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores |
| ASTM E 2076-2005 | 用声辐射检验玻璃纤维增强塑料风扇叶片的标准试验方法 | Standard Test Method for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission |
| ASTM E 2090-2006 | 利用光电子显微镜和扫描电子显微镜对清洁室擦刷工具释放粒子和纤维的尺寸差异计数用标准试验方法 | Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy |
| ASTM E 2098-2000 | PB级外绝缘和涂层系统(EIFS)中使用的玻璃纤维增强网暴露于氢氧化钠溶液后拉伸断裂强度测定的标准试验方法 | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
| ASTM E 2228-2002 | 纺织纤维的显微镜检验用标准指南 | Standard Guide for Microscopic Examination of Textile Fibers |
| ASTM E 2287-2003 | 单击薄膜色带和打印文本上断裂字模和纸纤维印记检验的标准指南 | Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text |
| ASTM E 2478a-2006 | 用声发射测定玻璃纤维增强塑料(FRP)材料基于损伤的设计应力用标准实施规程 | Standard Practice for Determining Damage-Based Design Stress for Fiberglass Reinforced Plastic (FRP) Materials Using Acoustic Emission |
| ASTM E 2581-2007 | 航天航空用聚合物基复合材料、夹层芯材和纤维缠绕压力容器的剪切测量技术的标准实施规程 | Standard Practice for Shearography of Polymer Matrix Composites, Sandwich Core Materials and Filament-Wound Pressure Vessels in Aerospace Applications |
| ASTM E 574-2006 | 用玻璃纤维或硅纤维绝缘的双重基础金属热电偶丝的标准规范 | Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation |
| ASTM F 1092-2004 | 玻璃纤维挤拔制露天防风暴和方型护栏设备的标准规范 | Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems |
| ASTM F 1173-2001 | 船舶用热固性树脂玻璃纤维管道系统标准规范 | Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications |
| ASTM F 1195-1999 | 气管插管术用硬质喉镜.纤维发光手术刀及柄用钩接式配件 | Standard Specification for Rigid Laryngoscopes for Tracheal Intubation-Hook on Fittings for Fiberilluminated Blades and Handles |
| ASTM F 1225-1999 | 测量胶片和纤维盒的打印带出口力的测试方法 | Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges |
| ASTM F 1536-1995 | 水激活合成聚氨酯玻璃纤维矫型铸带强度和凝固时间测定的标准试验方法 | Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape |
| ASTM F 1932-1998 | 测量睡袋纺织纤维回弹力的标准试验方法 | Standard Test Method for Measuring Sleeping Bag Loft |
| ASTM F 2019-2003 | 通过玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)的现场拖拉安装修复已有管道的标准操作规程 | Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ASTM F 2075-2004 | 置于运动场设备下面和周围的运动场安全表面用工程木纤维标准规范 | Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| ASTM F 2087-2001 | 玻璃纤维编织绳和油绳的包装标准规范 | Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick |
| ASTM F 2154-2001 | 多孔纤维玻璃布面的纤维玻璃吸声板标准规范 | Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced |
| ASTM F 711-2002 | 火线工具用玻璃纤维增强塑料棒和管的标准规范 | Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools |
| ASTM/ISO 51650-2005 | 醋酸纤维剂量测定系统使用的标准实施规程 | Standard Practice for Use of Cellulose Acetate Dosimetry Systems |
| IEEE 952-1997 | 单轴干涉仪式纤维光学旋转罗盘的标准格式指南和试验程序 | (Specification format guide and test procedure for single-axis interferometric fiber optic gyros) |
| IEEE N 322-1997 | 直接和间接示值石英纤维袖珍剂量计的检验和测试验规范 | (Inspection, test, construction, and performance requirements for direct reading electrostatic/electroscope type dosimeters) |
| IEEE N 42.6-1980 | 石英纤维静电计型曝光计和配套使用的曝光计的相互关系 | (Interrelationship of quarz-fiber electrometer type exposure meters and companion exposure meter chargers) |
| UL 1316-1994 | 石油产品、酒精和酒精汽油混合物用玻璃纤维增强塑料地下贮罐 | (Glass-fiber-reinforced plastic underground storage tanks for petroleum products, alcohols, and alcohol-gasoline mixtures ) |
| UL 1651-1997 | 光导纤维电缆 | (Optical fiber cable ) |
| UL 1713-2001 | 地下消防设备用玻璃纤维增强压力管道和管联接器 | (Pressure pipe and couplings, glass fiber-reinforced, for underground fire service ) |
| 编号 | 中文名称 | 英文名称 |