| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 15551-3-1985 | 辐射敏感胶卷.硝酸纤维胶卷.术语、特性、用途、贮存 | Radiation sensitive films; cellulose nitrate film; terminology, properties, utilization, storage |
| DIN 16734-1986 | 与沥青不相容的人造纤维增强的增塑聚氯乙烯(PVC-P)屋面毡.要求 | Man-made fibre reinforced plasticized polyvinyl chloride (PVC-P) roofing felt incompatible with bitumen; requirements |
| DIN 16737-1986 | 聚氯乙烯(PE-C)制的屋面毡和带编织纤维内衬层的防水薄板材.要求 | Chlorinated polyethylene (PE-C) roofing felt and waterproofing sheet with woven fabric inner layer; requirements |
| DIN 16740-1976 | 玻璃纤维织物.电气用玻璃纤维织物.交货技术条件 | Textile glass; textile glass fabrics for electrical purposes, technical delivery specifications |
| DIN 16741-1976 | 玻璃纤维织物.电气用带边的玻璃纤维织物带.交货技术条件 | Textile glass; tapes with edges consisting of textile glass fabrics for electrical purposes, technical delivery specifications |
| DIN 16867-1982 | 化工管路用玻璃纤维增强式聚酯树脂管道、配件和接头.交货技术条件 | Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions |
| DIN 16868-1-1994 | 玻璃纤维增强式不饱和聚酯树脂(UP-GF)管材.第1部分:缠绕式和填充式.尺寸 | Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Wound, filled; dimensions |
| DIN 16868-2-1994 | 玻璃纤维增强式不饱和聚酯树脂(UP-GF)管材.第2部分:缠绕式和填充式.一般质量要求、检验 | Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: Wound, filled; General quality requirements, testing |
| DIN 16869-1-1995 | 离心浇注玻璃纤维增强聚脂树脂管(VP-GF).第1部分:尺寸 | Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 1: Dimensions |
| DIN 16869-2-1995 | 离心浇注玻璃纤维增强聚脂树脂管(VP-GF).第2部分:一般质量要求、检验 | Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing |
| DIN 16870-1-1987 | 纺织玻璃纤维增强环氧树脂管.尺寸 | Wound glass fibre reinforced epoxy resin pipes; dimensions |
| DIN 16871-1982 | 离心铸塑玻璃纤维增强环氧树脂管.尺寸 | Centrifugally cast glass fibre reinforced epoxy resin (EP-GF) pipes; Dimensions |
| DIN 16872-1993 | 热塑性塑料管道用管接头组件.玻璃纤维增强的聚酯树脂(UP-GE)法兰.尺寸 | Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions |
| DIN 16944-1988 | 玻璃纤维增强的反应型树脂模塑材料.试验方法 | Glass fibre reinforced reaction resin moulding materials; test methods |
| DIN 16964-1988 | 绕制玻璃纤维增强聚酯树脂管.一般质量要求和试验 | Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing |
| DIN 16965-1-1982 | 绕制玻璃纤维增强聚酯树脂管(UP-GF).A型管.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type A pipes, dimensions |
| DIN 16965-2-1982 | 绕制玻璃纤维增强聚脂树酯管.B型管.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type B pipes, dimensions |
| DIN 16965-4-1982 | 纺织玻璃纤维增强聚脂树酯管.管、D管型.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type D pipes, dimensions |
| DIN 16965-5-1982 | 纺织玻璃纤维增强聚脂树酯管.管、E管型.尺寸 | Wound glass fibre reinforced polyester resin (UP-GF); pipes, Type E pipes, dimensions |
| DIN 16966-1-1988 | 玻璃纤维增强聚酯树脂(UP-GF)异型件和连接件.第1部分:一般质量要求和检验 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing |
| DIN 16966-2-1982 | 玻璃纤维增强式聚酯树脂管道配件和接头.弯管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions |
| DIN 16966-4-1982 | 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.三通喷管嘴尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions |
| DIN 16966-5-1982 | 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.缩径管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions |
| DIN 16966-6-1982 | 玻璃纤维增强聚酯树管(UP-GF)管件和接头组件.卡圈、法兰、密封圈、尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions |
| DIN 16966-7-1995 | 玻璃纤维增强聚酯树脂管道连接件及其组件.第7部分:套筒、法兰、法兰连接和对接件.一般质量要求和试验方法 | Pipe joints and their elements of glass fibre reinforced polyester resins - Part 7: Bushings, flanges, flanged and butt joints; general quality requirements and test methods |
| DIN 16966-8-1982 | 玻璃纤维增强聚酯管(UP-GF)管件和接头.层压塑料接头.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions |
| DIN 16967-2-1982 | 玻璃纤维增强环氧树脂(EP-GF)管件和接头.弯管、三通管、尺寸 | Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions |
| DIN 18089-1-1984 | 防火隔板.防火门填料.矿物纤维板（毡）.定义、名称、要求、检验 | Fire barriers; fillers for fire-doors; mineral fibre boards (felts); definition, designation, requirements, tests |
| DIN 18191-1980 | 作沥青路衬底的机织玻璃纤维织物 | Woven glass fabric as inlay bituminous sheeting |
| DIN 18192-1985 | 作沥青和聚合物沥青薄板镶嵌物的粘合聚酯纤维毡.概念、标志、要求和试验 | Bonded polyester fleece used as an inlay for bitumen and polymer bitumen sheeting; concept, designation, requirements, testing |
| DIN 18204-1-2007 | 用纺织物和塑料薄膜(篷帐布)制造的建筑物和帐篷罩部件.第1部分:涂聚氯乙烯(PVC)的聚酯基底纤维 | Components for enclosures made of textile fabrics and plastic films (awnings) for structures and tents - Part 1: PVC coated polyester base fabric |
| DIN 18820-1-1991 | 承载构件用玻璃纤维增强非饱和聚酯树脂和苯甲酰甲基树脂制层压塑料(GF-UP、GF-PHA).第1部分:结构、制造和特 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); structure, manufacture and characteristics |
| DIN 18820-2-1991 | 承载构件用玻璃纤维增强式非饱和聚酯和苯酚树脂制层压塑料(GF-UP.GF-PHA).第2部分:标准层压塑料的物理参数 | Laminates of textile glass-reinforced unsaturared polyester and phenolic resins for load-bearing structural members (GF-UP, GF-PHA); physical parameters for standard laminates |
| DIN 18820-3-1991 | 承载构件用玻璃纤维增强非饱和聚酯树脂和苯甲酰甲基树脂制层压塑料(GF-UP、GF-PHA).第3部分:承载层压塑料的 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); protective measures for load-bearing laminates |
| DIN 18820-4-1991 | 承载构件用玻璃纤维增强非饱和聚脂树酯和苯甲酰甲基树脂制层压塑料(GF-UP、GF-PHA).第4部分:试验和质量控制 | Laminates of textile glass-reinforced unsaturated polyester and phenacrylic resins for load-bearing structural members (GF-UP, GF-PHA); tests and quality control |
| DIN 19850-1-1996 | 污水管道用纤维水泥管和配件件.第1部分:管,支管和弯头尺寸 | Fibre cement pipes and fittings for sewers - Part 1: Dimensions of pipes, branches and bends |
| DIN 19850-2-1996 | 纤维水泥污水管和接头.第2部分:接头尺寸 | Fibre cement pipes and fittings for sewers - Part 2: Dimensions of joints |
| DIN 2103-1993 | 办公室机器.油墨带.纺织纤维油墨带 | Office machines; inked ribbons; woven fabric ribbons |
| DIN 28018-2006 | 玻璃纤维衬钢的压力容器.设备用0.063-10立方米的生产设备用容器 | Pressure vessels, glass lined steel - Vessels for production plants 0,063 m<(hoch)3> up to 10 m<(hoch)3> |
| DIN 28019-2006 | 玻璃纤维衬钢的压力容器.12.5-125立方米的储存用容器 | Pressure vessels, glass lined steel - Vessels for storage 12,5 m<(hoch)3> up to 125 m<(hoch)3> |
| DIN 28091-2-1995 | 密封板的交货技术条件.第2部分:纤维基密封材料.要求和试验 | Technical delivery conditions for gasket sheets - Part 2: Fibre-based gasket materials (FA); requirements and testing |
| DIN 28136-11-1989 | 搅拌器.第11部分:玻璃纤维衬里的 CE 型公称容量为 4000 升更换用刚制搅拌器顶盖喷嘴的位置和尺寸 | Agitator vessels; position and sizes of cover nozzles for glass lined steel agitator vessels, type CE, with a nominal volume of 4000 litres for replacement purposes |
| DIN 28145-6-1979 | 玻璃纤维衬里搅拌容器用焊接件.第6部分:支架 | Parts welded to glass lined agitator vessels; bracket |
| DIN 29505-1987 | 航空航天.纤维增强的塑料构件.图纸和零件清单的说明 | Aerospace; components of fibre reinforced plastics; indications in drawings and parts lists |
| DIN 29965-1992 | 航空航天.碳纤维.碳纤维素长丝纱.技术规范 | Aerospace; carbon fibres; carbon fibre filament yarns; technical specification |
| DIN 29971-1991 | 航空航天.不定向碳纤维环氧树脂薄板和预浸渍带.技术规范 | Aerospace; unidirectional carbon fibre-epoxy sheet and tape prepreg; technical specification |
| DIN 3068-1972 | 钢丝绳.6×24标准加7纤维芯的圆形绞股钢丝绳 | Steel wire ropes; round strand rope 6 × 24 Standard + 7 fibre cores |
| DIN 3535-5-1993 | 煤气供气密封件:煤气管件和煤气设备用橡胶、软木和合成纤维制密封材料.安全性试验要求 | Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests |
| DIN 3535-6-1999 | 供气用密封垫.第6部分:气阀、煤气设备和煤气主管道用基于合成纤维、石墨或聚四氟乙烯的密封垫材料 | Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains |
| DIN 40604-1-1965 | 硬化纤维.第1部分:板材、薄板材、条材、带材 | Vulcanized Fibre; Panels (Sheets), Sheeting, Strips, Tapes |
| DIN 40604-2-1967 | 硬化纤维.第1部分:管材和棒材 | Vulcanized fibre; tubes and rods |
| DIN 40763-1-1988 | 镍镉蓄电池.带纤维结构板的电池.塑料容器电池.标称容量、主要尺寸 | Nickel-cadmium-batteries; cells with fibre structured plates; cells in plastic containers; nominal capacities, main dimensions |
| DIN 40763-2-1990 | 镍镉蓄电池.带纤维结构板的电池.塑料容器电池.放电电流、最终放电电压、放电时间 | Nickel-cadmium batteries; cells with fibre structured plates; cells in plastic containers; discharge current, final discharge voltages, discharge time |
| DIN 4102-17-1990 | 建筑材料和构件的防火性能.第17部分:矿物纤维绝缘材料熔点的测定.概念、要求和检验 | Fire behaviour of building materials and elements; determination of melting point of mineral fibre insulating materials; concepts, requirements and testing |
| DIN 4195-1976 | 筛底.丝或化学纤维纺织布.尺寸 | Screening surfaces; woven filament cloth of silk or man-made fibers, dimensions |
| DIN 52141-1980 | 用做屋顶和防水板防护层的玻璃纤维毛状衬料.定义、名称、要求 | Glass fibre fleece as layer for roof and water-proof sheeting; definition, designation, requirements |
| DIN 52142-1978 | 卷铺屋面料和防水屋面料的载体材料玻璃纤维网.试验程序 | Glass fibre mat as carrier material for roll roofing and waterproofing; test procedures |
| DIN 52187-1979 | 木材的检验.顺纤维方向的极限剪切强度的测定 | Testing of wood; determination of ultimate shearing stress parallel to grain |
| DIN 52271-1981 | 矿物纤维绝缘材料的检验.高温性能 | Testing of mineral fibre insulating materials; Behaviour at elevated temperatures |
| DIN 52274-1986 | 矿物纤维绝缘材料检验.断裂强度.垂直于绝缘层面的层间抗拉强度测定 | Testing of mineral fibre insulating materials; determination of interlaminar tensile strength perpendicular to plane of insulating layer |
| DIN 52275-2-1978 | 矿物纤维绝缘材料的检验.测定直线尺寸和体密度.管壳 | Testing of mineral fibrous insulating materials; determination of linear dimensions and bulk density, casings |
| DIN 52316-1970 | 玻璃的检验.连续玻璃纤维长丝粗纱的刚性测定 | Testing of glass; determination of stiffness of continuous filament glass fibre rovings |
| DIN 53133-2006 | 纸板的试验.测定胶粘合波纹纤维板的耐水性 | Testing of board - Determination of water resistance of glue bond of corrugated fibreboard |
| DIN 53178-1969 | 色漆、清漆和类似涂料的检验.喷漆中硝化纤维含量的测定 | Testing of paints, varnishes and similar products; determination of nitro cellulose content of lacquers |
| DIN 53390-1988 | 玻璃纤维增强塑料的检验.单向玻璃纤维增强层压塑料圆棒的弯曲试验 | Testing of glass fibre reinforced plastics; bending test on unidirectional glass fibre reinforced laminated plastics in the form of round bars |
| DIN 53393-1976 | 玻璃纤维增强塑料的检验.受化学制品作用的性能 | Testing of Textile Glass-reinforced Plastics; Behaviour to the Effect of Chemicals |
| DIN 53766-1-1991 | 玻璃纤维增强塑料器具和容器的检验.粘合强度的测定 | Testing of glass fibre reinforced plastics apparatus and containers; determination of adhesive strength |
| DIN 53769-1-1988 | 玻璃纤维增强塑料管道检验.第1部分:B型管道配件纵向剪切强度的测定 | Testing of glass fibre reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings |
| DIN 53769-2-1986 | 玻璃纤维增加塑料管道检验.长期静液压试验 | Testing of glass fibre reinforced plastics pipes; long-term hydrostatic pressure test |
| DIN 53769-3-1988 | 玻璃纤维增强塑料管试验.管子短时间和长时间最大压力试验 | Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness |
| DIN 53769-6-1989 | 玻璃纤维增强塑料管道检验.第6部分:受内压脉动作用的管道和配件 | Testing of glass fibre reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure |
| DIN 53805-1980 | 纺织品的试验.短纤维长度的测定.术语和一般原则 | Testing of textiles; determination of the length of staple fibres; terminology and general principles |
| DIN 53806-1970 | 纺织品的试验.根据精梳纤维长度测量方法测定棉纤维长度 | Testing of textiles; determination of fibre length of cotton according to the comb staple method |
| DIN 53808-1-2003 | 纺织品的检验.用单纤维测量法测定纤维长度 | Testing of textiles - Determination of length of fibres by measuring of individual fibres |
| DIN 53811-1970 | 纺织品的试验.从显微投影的纵视图中测定纤维的直径 | Testing of textiles; determination of the diameter of fibres from longitudinal view by microscope projection |
| DIN 53814-1974 | 纺织品的检验.纤维和纱段吸湿能力的测定 | Testing of textiles; determination of water retention power of fibres and yarn cuttings |
| DIN 53830-4-1981 | 纺织品的检验 .单根纱线和合股线的线密度的测定.弹性纱线.包括由弹性纤维纺成的包芯纱线.用分段法 | Testing of textiles; determination of linear density of single and plied yarns; elasto-yarns including core spun yarns from elastofibres; short length method |
| DIN 53843-2-1988 | 纺织品的检验.第2部分:纺织纤维的环状拉力试验 | Testing of textiles; loop tensile test for staple fibres |
| DIN 53865-1998 | 纺织品试验.纤维转移倾向的测定.转筒缩绒法 | Testing of textiles - Determination of fibre migration tendency - Tumble-method |
| DIN 53941-1983 | 纺织品的检验.棉纤维马克隆尼值(Micronaire-Wert)的测定 | Testing of textiles; determination of micronaire value of cotton fibres |
| DIN 53943-1-1986 | 纺织品检验.棉纤维的成熟期.第1部分:概念 | Testing of textiles; cotton fibre maturity; concepts |
| DIN 53943-2-1978 | 纺织品的检验.第2部分:通过苛性钠溶液的膨胀处理并采用显观法对棉纤维的成熟度的测定 | Testing of textiles; state of maturity of cotton fibres, microscopic method, swelling in caustic soda solution |
| DIN 53943-3-1983 | 纺织品的试验.棉纤维的成熟情况.百分比成熟度的测定.用偏光显微镜的显微镜检验法 | Testing of textiles; cotton fibre maturity; determination of the percent maturity; microscopic method using a polarisation microscope |
| DIN 53944-1993 | 纺织品的试验.棉纤维计量长度和均匀度的测定 | Testing of textiles; determination of gauge length and eveness of cotton |
| DIN 54200-1974 | 纺织品的检验.用溶解法测定纤维混纺成分的定量测定.原理及应用范围 | Testing of textiles; quantitative analysis of fibre mixtures by means of solvent method, basis and field of application |
| DIN 54201-1975 | 纺织品的检验.纤维混纺织物的定量分析,一般操作方法 | Testing of textiles; quantitative analysis of fibre mixtures, directions for the work |
| DIN 54204-1975 | 纺织品的检验.羊毛和其它纤维二元混合织物的定量分析.氢氧化钾溶液法 | Testing of textiles; quantitative analysis of binary mixtures, wool with other fibres, potassium hydroxide solution method |
| DIN 54205-1975 | 纺织品试验.二元混合物成份的定量分析.天然或再生纤维素纤维与聚酯纤维.硫酸法 | Testing of textiles; quantitative analysis of binary mixtures, natural or regenerated cellulose fibres with polyester fibres, sulphuric acid method |
| DIN 54206-1975 | 纺织品试验.二元混合物成份的定量分析.蛋白质纤维与其它纤维.次氯酸盐法 | Testing of textiles; quantitative analysis of binary mixtures, protein fibres with other fibres, hypochlorite method |
| DIN 54208-2001 | 纺织品的试验.二元混合物的定量分析.含有其它纤维特别是棉花的再生纤维素纤维.甲酸/氯化锌法 | Testing of textiles - Quantitative analysis of binary mixtures - Regenerated cellulose fibres with other fibres, especially cotton; Formic acid/zinc chloride method |
| DIN 54210-1975 | 纺织品的检验..醋酯纤维素纤维与其它纤维二元混合织物的定量分析.丙酮法 | Testing of textiles; quantitative analysis of binary mixtures, acetate fibres with other fibres, acetone method |
| DIN 54211-1975 | 纺织品的检验.三醋酸短纤维与其它纤维二元混合织物的定量分析.二氯甲烷法 | Testing of textiles; quantitative analysis of binary mixtures, triacetate fibres with other fibres, dichlormethane (methylene chloride) method |
| DIN 54212-1975 | 纺织品的检验.酪蛋白纤维与其它纤维二元混合织物进行定量分析.胰蛋白酶法 | Testing of textiles; quantitative analysis of binary mixtures, casein fibres with other fibres, trypsin method |
| DIN 54215-1977 | 纺织品的检验.聚丙烯纤维与其它纤维二元混合物定量分析.混合二甲苯法 | Testing of textiles; quantitative analysis of binary mixtures, polypropylene fibres with other fibres, xylol method |
| DIN 54216-1975 | 纺织品的检验.聚氯乙烯纤维与其它纤维二元混合织物的定量分析.二硫化碳/丙酮法 | Testing of textiles; quantitative analysis of binary mixtures, polyvinyl chloride fibres with other fibres, carbon disulphide/acetone method |
| DIN 54217-1975 | 纺织品的检验.丙烯酸纤维、改良丙烯酸纤维及某些聚氯乙烯纤维与其它纤维二元混合织物的定量分析.二甲基甲酰 | Testing of textiles; quantitative analysis of binary mixtures, acrylic, modacrylic and certain polyvinyl chloride fibres with other fibres, dimethyl formamide method |
| DIN 54218-1975 | 纺织品的检验.醋酸纤维与聚氯乙烯纤维二元混合物的定量分析.醋酸法 | Testing of textiles; quantitative analysis of binary mixtures, acetate fibres with polyvinyl chloride fibres, acetic acid method |
| DIN 54220-1975 | 纺织品的检验.聚酰胺66纤维或聚酰胺6纤维与其它纤维二元混合织物的定量分析.甲酸法 | Testing of textiles; quantitative analysis of binary mixtures, polyamide 6 6 or polyamide 6 fibres with other fibres, formic acid method |
| DIN 54221-1975 | 纺织品的检验.聚酰胺66纤维或聚酰胺6纤维与其它纤维二元混合织物的定量分析.盐酸法 | Testing of textiles; quantitative analysis of binary mixtures, polyamide 6 6 or polyamide 6 fibres with other fibres, hydrochloric acid method |
| DIN 54270-1-1976 | 纺织品的检验.第1部分:纤维素极限粘度测定原则 | Testing of textiles; determination of the limit-viscosity of celluloses, principles |
| DIN 54270-2-1977 | 纺织品的检验.用氢氧化铜乙二氨溶液法测定纤维素的极限粘度 | Testing of textiles; determination of the limit-viscosity of celluloses, Cuen-procedure |
| DIN 54270-3-1977 | 纺织品的检验.第3部分:纤维素极限粘度的测定.EWNN<(指数)mod(NaCl)>程序 | Testing of textiles; determination of the limit-viscosity of celluloses, EWNN<(Index)mod(NaCl)>-procedure |
| DIN 54270-4-1977 | 纺织品的检验.用硝酸盐法测定纤维素的极限粘度 | Testing of textiles; determination of the limit-viscosity of celluloses, nitrate procedure |
| DIN 54274-1983 | 纺织品试验.对聚酰胺纤维中氨端基进行定量测 | Testing of textiles; quantitative analysis of amino end groups in polyamide fibres |
| DIN 54275-1977 | 纺织品的检验.用外推法测定纤维材料的pH值 | Testing of textiles; determination of the pH value of fibre materials, method of extrapolation |
| DIN 54282-1971 | 纺织品的检验.醋酸纤维或三醋酸纤维中醋酸含量的测定 | Testing of textiles; determination of content of acetic acid of acetate or triacetate fibres |
| DIN 54288-1977 | 纺织品试验.粘胶纤维中硫的定量测定 | Testing of textiles; quantitative determination of sulfur in viscose fibres |
| DIN 54500-2004 | 纸的检验.与密度相关的纤维及纸的光散射和吸光系数的测定 | Testing of paper - Determination of the density-related light-scattering and absorption coefficients of paper and fibre materials |
| DIN 54813-1994 | 塑料检验.纺织玻璃纤维增强的聚酯树脂塑料的连接试验.用弯曲剪切试验测定断裂负荷 | Testing of plastics; testing of joints of textile glass reinforced polyester resins; determination of the breaking load by the bending shear test |
| DIN 55428-1-1998 | 包装材料.硬质纤维板.第1部分:要求和试验 | Packaging materials - Solid fibreboard - Part 1: Requirements, testing |
| DIN 55428-2-1998 | 包装材料.硬质纤维板.第2部分:湿强度.要求和试验 | Packaging materials - Solid fibreboard - Part 2: Wet strength; requirements, testing |
| DIN 55429-2-1987 | 包装.纸板、硬纤维板或波纹板制箱子.尺寸、极限偏差、尺寸检验 | Packaging; boxes manufactured from board, solid fibre-board or corrugated board; dimensions, limit deviations, testing of dimensions |
| DIN 55483-1-1984 | 包装用橡胶纤维和/或动物纤维.第1部分:要求、检验 | Rubberized fibre and/or hair for packaging; requirements, testing |
| DIN 55511-1-1984 | 包装方法.可调整到600mm×400mm、用硬纤维板和波纹板制成的包装箱.带底和折板顶盖的可折叠箱 | Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); folding boxes with bottom and top flaps |
| DIN 55511-3-1984 | 包装方法.可调整到600mm×400mm、用硬纤维板和波纹板制成的包装箱.伸缩式包装箱 | Means of packaging; boxes manufactured from solid fibre-board or corrugated board, adjusted to 600 mm 400 mm (area module); telescope boxes |
| DIN 55952-1981 | 油漆和清漆的粘合剂.纤维素醚.试验 | Binders for paints and varnishes; cellulose ethers; testing |
| DIN 55953-1981 | 油漆和清漆.有机酸纤维素酯.试验 | Binders for paints and varnishes; cellulose esters of organic acids; testing |
| DIN 57441-2-1982 | 标称电压>1KV系统用有机材料绝缘子试验.带玻璃纤维芯子的户外链式绝缘子的试验(VDE规范) | Tests on insulators of organic material for systems with nominal voltages greater than 1 kV; tests on outdoor composite insulators with fibre glass core [VDE Guide] |
| DIN 58140-1-1986 | 纤维光学.术语和符号 | Fibre optics; terms and symbols |
| DIN 58140-2-1986 | 纤维光学.纤维光学元件的分类 | Fibre optics; classification of fibre optic elements |
| DIN 58141-4-1990 | 光学纤维元件的检验.光导纤维的直径和厚度的测定 | Testing of fibre optic elements; determination of diameters and thicknesses of optical fibres |
| DIN 58141-5-1993 | 光纤元件的检验.光导体和图象导体纤维折断率的测定 | Testing of fibre optic elements; determination of the rate of broken fibres of light and image conductors |
| DIN 58141-7-1990 | 光学纤维元件的检验.纤维光缆抗拉载荷的测定 | Testing of fibre optic elements; determination of tensile load of fibre optic cables |
| DIN 58141-9-1995 | 纤维光学元件的检验.第9部分:光学纤维的圆度和同心度偏差的测定 | Testing of fibre optic elements - Part 9: Determination of deviation of the roundness and the concentricity of optical fibres |
| DIN 58906-1-2000 | 止血学.纤维蛋白原浓度测定.第1部分:按测定条款中规定的可凝固的纤维蛋白原的参考测量方法 | Haemostaseology - Determination of fibrinogen concentration - Part 1: Reference measurement procedure for the determination of clottable fibrinogen as described by Clauss |
| DIN 60001-1-2001 | 纺织纤维.第1部分:天然纤维和字母代码 | Textile fibres - Part 1: Natural fibres and letter codes |
| DIN 60001-2-1990 | 纺织纤维.第2部分:纤维形状和生产方式 | Textile fibres; forms of fibres and manufacturing |
| DIN 60005-2006 | 纺织吊索.安全.人造纤维一次性单层机织吊索 | Textile slings - Safety - Disposable flat woven slings, made of man-made fibres |
| DIN 60011-1958 | 亚麻纤维 .加工阶段 | flax fibre; processing phases |
| DIN 60021-1975 | 纤维初加工产品和前纺工程产品.术语和定义 | Products of fibre preparing and preparatory spinning, terms and definitions |
| DIN 60105-1983 | 用韧皮纤维纺织法纺制的纱线 | Yarns produced on bast fibre spinning systems |
| DIN 60150-1984 | 硬纤维纱线 | Hard fibre yarns |
| DIN 60910-1985 | 纺织纤维和纱线的线性密度.得可萨斯（Tex)体系的换算表 | Linear densities of textile fibres and yarns; conversion tables for the Tex system |
| DIN 6141-2000 | 包装材料.纤维板带盖桶.钢制的底和盖 | Packaging - Fibreboard drums - Bottom and lid made of steel |
| DIN 61850-1976 | 纺织玻璃纤维产品和辅助产品.术语和定义 | Textile glass products and auxiliary products; terms and definitions |
| DIN 61853-1-1987 | 纺织玻璃纤维.增强塑料用的玻璃纤维毡片.交货技术条件 | Textile glass; textile glass mats for plastics reinforcement; technical delivery conditions |
| DIN 61853-2-1987 | 纺织玻璃纤维.增强塑料用的玻璃纤维毡片.分类和用途 | Textile glass; textile glass mats for plastics reinforcement; classification and application |
| DIN 61854-1-1987 | 玻璃纤维织物.塑料增强用的纺织玻璃纤维织物.纺织玻璃长丝织物和纺织粗纱.交货技术条件 | Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; technical delivery conditions |
| DIN 61854-2-1987 | 玻璃纤维织物.塑料增强用的纺织玻璃纤维织物.纺织玻璃长丝织物和纺织粗纱.类型 | Textile glass; woven glass fabrics for plastics reinforcement; woven glass filament fabric and woven roving; types |
| DIN 64165-1977 | 纺织纤维预梳用的粗梳机.术语、定义和结构原理 | Carding willow for fibre-preparing; terms and definitions, principles of construction |
| DIN 65060-1991 | 航空航天.玻璃纤维织物.增强塑料材料用玻璃纤维丝粗纱.技术规范 | Aerospace; textile glass; textile glass filament rovings for reinforcement of plastics; technical specification |
| DIN 65065-1979 | 航空航天.纤维增强树脂.技术规范 | Aerospace; resins for fiber reinforced, technical specification |
| DIN 65066-1991 | 航空航天.纺织玻璃纤维.玻璃长丝纱织物.技术规范 | Aerospace; textile glass; woven glass filament fabric; technical specification |
| DIN 65067-1-1980 | 航空航天.具有纤维增强塑料覆盖层(FK)的夹层结构.技术规范 | Aerospace; sandwich structures with top layers of fibre reinforced plastics, technical specification |
| DIN 65071-1-1992 | 航空和航天.纤维增强模塑材料.单向缠绕的纱和粗纱试验板的制备 | Aerospace; fibre reinforced moulding materials; preparation of test panels of unidirectional wound yarns and rovings |
| DIN 65071-2-1992 | 航空航天.纤维增强模塑材料.平面增强织物试验板的制备 | Aerospace; fibre reinforced moulding materials; preparation of test panels of plain reinforcing fibre products |
| DIN 65071-3-1993 | 航空和航天.纤维增强模塑材料.蜂窝状预浸渍夹层试验板的制备 | Aerospace; fibre reinforced moulding materials; preparation of honeycomb/prepreg sandwich test panels |
| DIN 65090-1979 | 航空航天.用E型玻璃制成的玻璃纤维和预浸玻璃长丝织物(预浸渍体).技术规范条件 | Aerospace; textile glass, preimpregnated filament glass cloth from E-glass (Prepreg), technical specifications |
| DIN 65116-1980 | 航空和航天.硼纤维增强的模塑材料.层压试件的制备 | Aerospace; boron fibre reinforced mouldings, preparation of test laminates |
| DIN 65117-1980 | 航空和航天.预浸渍单向硼纤维层(BFK-浸渍体)，尺寸、质量 | Aerospace; preimpregnated unidirectional boron fibres (BFK-prepreg), dimensions, masses |
| DIN 65142-1989 | 航空航天.预浸渍的纤维薄板和纤维带(预浸渍的).粘接强度的测定 | Aerospace; preimpregnated fibre sheet and tape (prepreg); determination of bond strength |
| DIN 65146-2-1991 | 航空航天.预浸渍的碳纤维长丝织物和环氧树脂.技术规范 | Aerospace; preimpregnated woven fabric of carbon filament yarn and epoxy resin; technical specification |
| DIN 65147-1-1987 | 航空航天.碳素纤维.碳素纤维长丝织物.尺寸、质量 | Aerospace; carbon fibres; fabric of carbon fibre filament yarn; dimensions, masses |
| DIN 65147-2-1987 | 航空航天.碳纤维.碳纤维长丝织物.技术规范 | Aerospace; carbon fibres; fabric of carbon fibre filament yarn; technical specification |
| DIN 65148-1986 | 航空航天.纤维增强塑料的试验.用拉伸试验测定中层间的抗剪强度 | Aerospace; testing of fibre-reinforced plastics; determination of interlaminar shear strength by tenside test |
| DIN 65184-1993 | 航空航天.碳纤维.高性能碳纤维素长丝纱.尺寸和质量 | Aerospace; carbon fibres; high performance carbon fibre filament yarns; dimensions, masses |
| DIN 65375-1989 | 航空航天.纤维增强的塑料.单向层压板的试验.与纤维方向垂直的压力试验 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; compression test transverse to fiber direction |
| DIN 65378-1989 | 航空航天.纤维增强的塑料.单向层压板的检验.与纤维方向垂直的拉伸试验 | Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction |
| DIN 65382-1988 | 航空航天.塑料用加强纤维.浸渍纱线试样的拉力试验 | Aerospace; reinforcement fibres for plastics; tensile test of impregnated yarn test specimens |
| DIN 65383-1997 | 航空航天.结构用热固环氧树脂纺织玻璃纤维长丝织物预浸渍品.技术规范 | Aerospace - Thermosetting epoxy woven glass filament fabric preimpregnated for structural applications - Technical specification |
| DIN 65453-1993 | 航空航天.碳纤维和双马来酰亚胺树脂或聚酰亚胺树脂制的预浸渍不定向薄板材 | Aerospace; preimpregnated unidirectional sheet of carbon fibres and bismaleinimide- or polyimide resin; technical specification |
| DIN 65466-1996 | 航空航天.纤维增强塑料.单向层压制品试验.拉伸剪切强度和剪切模数测定 | Aerospace - Fibre reinforced plastics - Testing of unidirectional laminates; Determination of shear strength and shear modulus in tension |
| DIN 65469-1992 | 航空航天.纤维增强的塑料.单层扁平拉伸样件的拉伸试验 | Aerospace; fibre-reinforced plastics; tensile test of monolayer flat tension specimens |
| DIN 65474-1992 | 航空航天.纤维增强的塑料.温度锋值试验方法 | Aerospace; fibre reinforced plastics; thermal-spike test method |
| DIN 65559-1991 | 航空航天.纤维增强的塑料.多向层压板的试验.缺口孔抗拉强度的测定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of open-hole tensile strength |
| DIN 65560-1991 | 航空航天.纤维增强的塑料.多向层压板的试验.已填充孔抗压强度的测定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of filled-hole compressive strength |
| DIN 65561-1991 | 航空航天.纤维增强的塑料.多向层压板的试验.冲击试验负荷后抗压强度的测定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of compressive strength after impact test |
| DIN 65562-1991 | 航空航天.纤维增强的塑料.多向层压板的试验.支承强度的测定 | Aerospace; fibre reinforced plastics; testing of multidirectional laminates; determination of bearing strength |
| DIN 65564-1992 | 航空航天.增强纤维.用HPLC法对碳素长丝纱、织物和短切原丝的浆成份进行定性测定 | Aerospace; reinforcement fibres; qualitative determination of size constituents of carbon filament yarns, woven fabrics and chopped strands by HPLC |
| DIN 65565-1992 | 航空航天.增强纤维.用红外分光法对碳素长丝纱、织物和短切原丝的浆类型进行定性试验 | Aerospace; reinforcement fibres; qualitative testing of size type of carbon filament yarns, woven fabrics and chopped strands by infrared spectroscopy |
| DIN 65566-1992 | 航空航天.增强纤维.碳素长丝纱、织物和短切原丝的浆含量的测定 | Aerospace; reinforcement fibres; determination of size content of carbon filament yarns, woven fabrics and chopped strands |
| DIN 65567-1992 | 航空航天.增强纤维.芳族聚酰胺长丝纱,织物和短切原丝的整理剂含量的测定 | Aerospace; reinforcement fibres; determination of finish content of aramid filament yarns, woven fabrics and chopped strands |
| DIN 65568-1992 | 航空航天.增强纤维.碳素长丝纱、织物和短切原丝的耐热氧化性能的测定 | Aerospace; reinforcement fibres; determination of thermal oxidative resistance of carbon filament yarns, woven fabrics and short cuts |
| DIN 65569-1-1992 | 航空航天.增强纤维.复丝纱密度的测定.悬浮法 | Aerospace; reinforcement fibres; determination of density of filament yarns; sink-float method |
| DIN 65569-2-1992 | 航空航天.增强纤维.复丝纱密度的测定.流体比重秤量法 | Aerospace; reinforcement fibres; determination of density of filament yarns; hydrostatic weighing method |
| DIN 65571-1-1992 | 航空航天.增强纤维.复丝纱横截面面积和复丝纱直径的测定.计算方法 | Aerospace; reinforcement fibres; determination of filament diameter and cross-sectional area of filament yarns; calculation method |
| DIN 65571-2-1992 | 航空和航天.增强纤维.复丝纱直径的测定.纵向投影法 | Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; longitudinal projection method |
| DIN 65571-3-1992 | 航空航天.增强纤维.长丝纱的长丝直径、长丝横截面形状和横截面面积的测定.横磨测量 | Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section |
| DIN 65571-4-1992 | 航空航天.增强纤维.复丝纱的长丝直径的测定.激光干涉测量法 | Aerospace; reinforcement fibres; determination of filament diameter of filament yarns; laser interferometry |
| DIN 65572-1992 | 航空航天.碳纤维和无活性热塑塑料制单向片材和带材的预浸料.技术规范 | Aerospace; unidirectional sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification |
| DIN 65583-1999 | 航空航天.纤维增强塑料.动态负荷下纤维复合材料的玻璃化转变的测定 | Aerospace - Fibre reinforced materials - Determination of glass transition of fibre composites under dynamic load |
| DIN 65597-1993 | 航空航天.纤维增强塑料.放热反应时温差的测定 | Aerospace; fibre reinforced plastics; determination of temperature difference on exothermic reaction |
| DIN 65598-1993 | 航空航天.纤维增强塑料.层压制品裂纹频度的测定 | Aerospace; fibre reinforced plastics; determination of cracking frequency on laminates |
| DIN 65629-1993 | 航空航天.碳纤维和非活性热塑塑料制预浸渍纤维薄板材和带材. 技术规范 | Aerospace; fabric sheet and tape prepreg from carbon fibres and non-reactive thermoplastics; technical specification |
| DIN 65673-1999 | 航空航天.纤维增强塑料.纱疵,织疵和预浸渍体疵点的定义 | Aerospace - Fibre reinforced plastics - Description of yarn, fabric and prepreg defects |
| DIN 68100 Bb.4-1978 | 木材处理和加工的线性测量和角度量纲的公差.受湿度影响刨花板、胶合板和纤维板在厚度、长度和宽度方向的尺 | Tolerances for linear measure and angular dimensions in the wood-working and wood-processing industry; change of dimensions due to the influence of moisture in the direction of thickness, width and length of particle-board, plywood and fibreboard |
| DIN 6899-1988 | 纤维绳索的钢套环 | Steel thimbles for fibre ropes |
| DIN 7737-1959 | 层压制品.硬化纤维.型号 | Laminated Products; Vulcanized Fibre, Types |
| DIN 7738-1959 | 层压材料制品.硬化纤维板.验收.检验方法 | Laminated Products; Vulcanized Fibre, Acceptance, Test Methods |
| DIN 7742-1-1988 | 塑料模塑材料.纤维素聚酯类(CA, CP, CAB)热塑性模塑材料.分类和名称 | Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation |
| DIN 7742-2-1990 | 纤维素酯(CA.CPCAB)模塑材料.第2部分:模塑材料试样的制备和性能测定 | Cellulose ester (CA, CP, CAB) moulding materials; preparation of specimens and determination of their properties |
| DIN 81921-1982 | 纤维绳的加强线夹 | Belaying cleats for fibre ropes |
| DIN 83307-1999 | 船舶和海上技术.圆形或螺旋形编织的化学纤维绳索 | Ships and marine technology - Round or spiral plated man-made fibre ropes |
| DIN 83319-1999 | 纤维绳索.捻接绳.定义、安全性要求.试验方法 | Fibre ropes - Splices - Definitions, safety requirements, test method |
| DIN 83329-1998 | 造船和海上技术.按韧皮纤维纺纱加工系统生产的纱线制的聚丙烯纤维绳索 | Ships and marine technology - Polypropylene fibre ropes made of yarns produced on bast fibre spinning systems |
| DIN 83334-1999 | 船舶和海上技术.高拉伸强度多丝制聚丙烯纤维绳索 | Ships and marine technology - Polypropylene fibre ropes, made of high-tensile multifilament |
| DIN CEN/TS 14578-2003 | 给水或排水排污用塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).安装的推荐性实施规 | Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation; German version CEN/TS 14578:2003 |
| DIN CEN/TS 14807-2005 | 塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GRP).地下GRP-UP管道的结构分析指南 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines; German version CEN/TS 14807:2004 |
| DIN CEN/TS 15365-2006 | 高级工业陶瓷.无化学反应环境的高温条件下陶瓷纤维的机械性能.通过冷端法测定儒变特性 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method; German version CEN/TS 15365:2006 |
| DIN CEN/TS 15658-2007 | 高级工业陶瓷.无反应环境高温条件下陶瓷纤维的机械特性.用热端法测定儒变性能 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method; German version CEN/TS 15658:2007 |
| DIN EN 1007-3-2002 | 高技术陶瓷.陶瓷复合材料.增强的试验方法.第3部分:长纤维直径和横截面积的测定; 德文版本 EN 1007-3:2002 | Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area; German version EN 1007-3:2002 |
| DIN EN 1007-4-2004 | 高级工业陶瓷.陶瓷复合材料.纤维增强的试验方法.第4部分:环境温度下长纤维的抗拉性能测定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature; German version EN 1007-4:2004 |
| DIN EN 1007-5-2003 | 高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.第5部分:室温下复丝束中长丝断开时的拉伸强度和拉伸应变分 | Advanced technical ceramics - Ceramic composites; Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature; German version EN 1007-5:2003 |
| DIN EN 1013-2-1999 | 单层屋顶反光塑料型板.第2部分:玻璃纤维增强聚酯树脂板(GF-UP)特殊要求和试验方法 | Light transmitting profiled plastic sheeting for single skin roofing - Part 2: Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP); German version EN 1013-2:1998 |
| DIN EN 1094-1-1997 | 绝缘耐火产品.第1部分:陶瓷纤维制品术语 | Insulating refractory products - Part 1: Terminology for ceramic fibre products; German version EN 1094-1:1997 |
| DIN EN 1094-3-2003 | 隔热耐火产品.第3部分:陶瓷纤维隔热制品的分类 | Insulating refractory products - Part 3: Classification of insulating products made from ceramic fibres; German version EN 1094-3:2003 |
| DIN EN 1119-1996 | 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管和配件.密封性和耐柔性连接和铰链连接磨损能力试验方法 | Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced articulation joints; German version EN 1119:1996 |
| DIN EN 1120-1996 | 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管和配件.弯曲状态下管道内壁抗化学腐蚀能力测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition; German version EN 1120:1996 |
| DIN EN 1169-1999 | 混凝土预制件.玻璃纤维增强混凝土工厂生产控制一般规则 | Precast concrete products - General rules for factory production control of glass-fibre reinforced cement; German version EN 1169:1999 |
| DIN EN 1170-1-1998 | 混凝土预制件.玻璃纤维增强混凝土的试验方法.第1部分:基质一致性的测量.坍落试验法 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix; "Slump test" method; German version EN 1170-1:1997 |
| DIN EN 1170-2-1998 | 混凝土预制件.玻璃纤维增强混凝土用检验方法.第2部分:新鲜的玻璃纤维混凝土中纤维含量的测定.冲洗试验 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC; "wash out test"; German version EN 1170-2:1997 |
| DIN EN 1170-3-1998 | 混凝土预制件.玻璃纤维增强混凝土试验方法.第3部分:喷射GRC中纤维含量测量 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC; German version EN 1170-3:1997 |
| DIN EN 1170-4-1998 | 混凝土预制件.玻璃纤维增强混凝土试验方法.第4部分:抗弯强度测量.简化抗弯试验法 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength; "simplified bending test" method; German version EN 1170-4:1997 |
| DIN EN 1170-5-1998 | 混凝土预制件.玻璃纤维增强混凝土试验方法.第5部分:抗弯强度测量.完整抗弯试验法 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength; "complete bending test" method; German version EN 1170-5:1997 |
| DIN EN 1170-6-1998 | 混凝土预制件.玻璃纤维增强混凝土试验方法.第6部分:浸入法水吸附和干密度测定 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density; German version EN 1170-6:1997 |
| DIN EN 1170-7-1998 | 混凝土预制件.玻璃纤维增强混凝土试验方法.第7部分:湿度引起尺寸变化极限值测量 | Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content; German version EN 1170-7:1997 |
| DIN EN 12195-2-2001 | 道路车辆上的装载物固定装置.安全.第2部分:人造纤维制成的捆绑网 | Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres; German version EN 12195-2:2000 |
| DIN EN 1225-1996 | 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.潮湿蠕变系数测定和长时期规定圆度稳定性计算 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness; German version EN 1225:1996 |
| DIN EN 1226-1996 | 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.耐初始圆度变形验证方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection; German version EN 1226:1996 |
| DIN EN 1227-1998 | 塑料管道系统.玻璃纤维增强热固塑料管(GFK).测定潮湿条件下环形件持久变形性 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions; German version EN 1227:1997 |
| DIN EN 1228-1996 | 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.初始规定圆度稳定性测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness; German version EN 1228:1996 |
| DIN EN 1229-1996 | 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.管壁短期内压密封性验证试验方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure; German version EN 1229:1996 |
| DIN EN 12369-1-2001 | 木板.结构设计特征值.第1部分:OSB.碎料板和纤维板 | Wood-based panels - Characteristic values for structural design - Part 1: OSB, particleboards and fibreboards; German version EN 12369-1:2001 |
| DIN EN 12467-2000 | 纤维水泥平板材.产品规范和试验方法 | Fibre-cement flat sheets - Product specifications and test methods; German version EN 12467:2000 |
| DIN EN 12562-1999 | 纺织品.Para-aramid多纤维纱.检验方法 | Textiles - Para-aramid multifilament yarns - Test methods; German version EN 12562:1999 |
| DIN EN 12575-1998 | 塑料.热固成形模塑化合物.SMC中纤维湿润级的测定 | Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC; German version EN 12575:1998 |
| DIN EN 12576-1998 | 塑料.纤维增强的复合材料.SMC,BMC和DMC制模压试验板件的备制 | Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC; German version EN 12576:1998 |
| DIN EN 12590-1999 | 纺织品.全部或部分由合成纤维制成的工业缝纫线 | Textiles - Industrial sewing threads made wholly or partly from synthetic fibres; German version EN 12590:1999 |
| DIN EN 1261-1995 | 一般用途纤维绳索.大麻绳 | Fibre ropes for general service - Hemp; German version EN 1261:1995 |
| DIN EN 12654-1-1998 | 纺织玻璃纤维.纱线.第1部分:标识 | Textile glass - Yarns - Part 1: Designation; German version EN 12654-1:1998 |
| DIN EN 12654-2-1998 | 纺织玻璃纤维.纱线.第2部分:试验方法和一般要求 | Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998 |
| DIN EN 12654-3-1998 | 纺织玻璃纤维.纱线.第3部分:通用的一般要求 | Textile glass - Yarns - Part 3: General requirements for general applications; German version EN 12654-3:1998 |
| DIN EN 12710-2006 | 纤维纸板筒.标称容量15～250升带锁紧圈的活动头(开口)纸筒 | Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l English version of DIN EN 12710:2006-08 |
| DIN EN 12751-1999 | 纺织品.试验用纤维、纱和织物的抽样 | Textiles - Sampling of fibres, yarns and fabrics for testing; German version EN 12751:1999 |
| DIN EN 12763-2000 | 建筑物排水系统纤维水泥管道和配件.尺寸和交货技术条件 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery; German version EN 12763:2000 |
| DIN EN 12971-1-1999 | 增强纤维.纺织玻璃短纤维丝的规范.第1部分:标识 | Reinforcements - Specification for textile glass chopped strands - Part 1: Designation; German version EN 12971-1:1999 |
| DIN EN 12971-2-1999 | 增强纤维.纺织玻璃短纤维丝的规范.第2部分:试验方法和一般要求 | Reinforcements - Specification for textile glass chopped strands - Part 2: Test methods and general requirements; German version EN 12971-2:1999 |
| DIN EN 12971-3-1999 | 增强纤维.纺织玻璃短纤维丝的规范.第3部分:技术要求 | Reinforcements - Specification for textile glass chopped strands - Part 3: Specific requirements; German version EN 12971-3:1999 |
| DIN EN 13002-2-1999 | 碳纤维长丝纱.第2部分:试验方法和通用规范 | Carbon fibre yarns - Part 2: Test methods and general specifications; German version EN 13002-2:1999 |
| DIN EN 13010-2003 | 包装.单元包装.硬质纤维板显示的尺寸和要求 | Packaging - Unit packaging - Dimensions and requirements for pegboard display; German version EN 13010:2003 |
| DIN EN 13121-4 Berichtigung 1-2007 | 地上用玻璃纤维增强塑料(GRP)储罐和容器.第4部分:交付、安装和维修.DIN EN 13121-4-2005技术勘误 | GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance; German version EN 13121-4:2005, Corrigenda to DIN EN 13121-4:2005-03; German version EN 13121-4:2005/AC:2007 |
| DIN EN 13168-2001 | 建筑物隔热产品.工厂制木纤维制品.规范 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification; German version EN 13168:2001 |
| DIN EN 13171 Berichtigung 1-2006 | 建筑物用绝热产品.工厂生产的木纤维产品.规范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001, Corrigenda to DIN EN 13171:2001-10; German version EN 13171:2001/AC:2005 |
| DIN EN 13171-2001 | 建筑物隔热产品.工厂制木纤维制品.规范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001 |
| DIN EN 13171/A1-2004 | 建筑物用热隔绝产品.工厂制木纤维产品.规范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification; German version EN 13171:2001/A1:2004 |
| DIN EN 13280-2001 | 地上储存冷水用整体式和组合式玻璃纤维增强储水池规范 | Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water; German version EN 13280:2001 |
| DIN EN 13360-2003 | 橡胶或涂塑纤维.三语种术语 | Rubber- or plastics-coated fabrics - Terminology; Trilingual version EN 13360:2002 |
| DIN EN 13392-2001 | 纺织材料.单纤维丝.线密度测定 | Textiles - Monofilaments - Determination of linear density; German version EN 13392:2001 |
| DIN EN 13413-2002 | 地板弹性铺覆物.带填充纤维衬底的聚氯乙烯地板铺覆物.规范 | Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification; German version EN 13413:2001 |
| DIN EN 13421-2006 | 塑料.热模化合物.复合和增强纤维.压模化合物的向异性能测定用试样制备 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites English version of DIN EN 13421:2006-05 |
| DIN EN 13473-1-2001 | 增强.多轴多股纤维织物规范.第一部分:命名 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 1: Designation; German version EN 13473-1:2001 |
| DIN EN 13473-2-2001 | 增强.多轴多股纤维织物规范.第2部分:试验方法和一般要求 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements; German version EN 13473-2:2001 |
| DIN EN 13473-3-2001 | 增强.多轴多股纤维织物规范.第3部分:特殊要求 | Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 3: Specific requirements; German version EN 13473-3:2001 |
| DIN EN 13496-2003 | 建筑物热绝缘产品.玻璃纤维绝热网机械特性测定 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes; German version EN 13496:2002 |
| DIN EN 13864-2004 | 运动场表面.合成纤维网线抗拉强度的测定 | Surfaces for sports areas - Determination of tensile strength of synthetic yarns; German version EN 13864:2004 |
| DIN EN 1393-1996 | 塑料管道系统.玻璃纤维增强热固性塑料管(GFK).初始纵向拉伸性能测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties; German version EN 1393:1996 |
| DIN EN 1394-1996 | 塑料管道系统.玻璃纤维增强热固塑料管(GFK).切线方向表面管头拉伸性能测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength; German version EN 1394:1996 |
| DIN EN 14020-1-2003 | 增强材料.玻璃纤维粗纱规范.第1部分:命名 | Reinforcements - Specification for textile glass rovings - Part 1: Designation; German version EN 14020-1:2002 |
| DIN EN 14020-2-2003 | 增强材料.玻璃纤维粗纱规范.第2部分:试验方法和一般要求 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements; German version EN 14020-2:2002 |
| DIN EN 14020-3-2003 | 增强材料.玻璃纤维粗纱规范.第3部分:特殊要求 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements; German version EN 14020-3:2002 |
| DIN EN 14053-2003 | 包装.波纹板或实心纤维纸板制成的包装件 | Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction; German version EN 14053:2003 |
| DIN EN 14278-1-2004 | 纺织品.棉纤维黏性的测定.第1部分:使用手工热检测设备的方法 | Textiles - Determination of cotton fibre stickiness - Part 1: Method using a manual thermodetection device; German version EN 14278-1:2004 |
| DIN EN 14278-2-2004 | 纺织品.棉纤维黏性的测定.第2部分:使用自动热检波板设备的方法 | Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device; German version EN 14278-2:2004 |
| DIN EN 14278-3-2004 | 纺织品.棉纤维黏性的测定.第3部分:使用自动热检波旋转鼓设备的方法 | Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device; German version EN 14278-3:2004 |
| DIN EN 14362-2 Berichtigung 1-2005 | 纺织品.衍生自偶氮染色剂的特定芳香胺的测定方法.第2部分:经纤维萃取获得的偶氮染色剂使用的检测.DIN EN 14 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German version EN 14362-2:2003, Corrigenda to DIN EN 14362-2:2003-12; German version EN 14362-2:2003/AC:2005 |
| DIN EN 14362-2-2003 | 纺织品.衍生自偶氮染色剂的特定芳香胺的测定方法.第2部分:通过萃取纤维取得的偶氮染色剂使用的检测 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres; German version EN 14362-2:2003 |
| DIN EN 1444-2001 | 纤维水泥管.敷设和现场施工指南 | Fibre-cement pipelines - Guide for laying and on-site work practices; German version EN 1444:2000 |
| DIN EN 14447-2005 | 纤维增强塑料.玻璃垫增强热塑性塑料.流动性和固化的测定 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005 |
| DIN EN 1447-1996 | 塑料管道系统.玻璃纤维增强热固塑料管(GFK).内压耐久性能测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longterm resistance to internal pressure; German version EN 1447:1996 |
| DIN EN 1448-1997 | 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.抗拉套管和顶尖与弹性体密封件连接的结构类型检验方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals; German version EN 1448:1996 |
| DIN EN 14488-3-2006 | 检测喷射混凝土.第3部分:纤维钢筋梁的挠曲强度（第一峰、最后和残余） | Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens English version of DIN EN 14488-3:2006-09 |
| DIN EN 14488-5-2006 | 喷射混凝土试验.第5部分:纤维钢筋混凝土板样本的能量吸收能力的测定 | Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens English version of DIN EN 14488-5:2006-08 |
| DIN EN 14488-7-2006 | 检测喷射混凝土.第7部分:纤维钢筋混凝土的纤维含量 | Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete English version of DIN EN 14488-7:2006-08 |
| DIN EN 1449-1997 | 塑料管道系统.玻璃纤维增强热固塑料(GFK)管.已粘接套管和顶尖连接件结构类型检验方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of a cemented socket- and -spigot joints; German version EN 1449:1996 |
| DIN EN 1450-1999 | 塑料管道系统.玻璃纤维增强的热固塑料部件(GFK).对采用螺栓固定的法兰连接点的设计进行验证的试验方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints (includes amendment A1:1998); German version EN 1450:1996 + A1:1998 |
| DIN EN 14525-2005 | 不同材料(球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥)管道用球墨铸铁大公差联接器和法兰接头 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement; German version EN 14525:2004 |
| DIN EN 14649-2005 | 预制混凝土产品.水泥和混凝土中玻璃纤维残留强力的试验方法(SIC试验) | Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST); German version EN 14649:2005 |
| DIN EN 14650-2005 | 预浇铸混凝土产品.金属纤维混凝土工厂生产控制通用规则 | Precast concrete products - General rules for factory production control of metallic fibered concrete; German version EN 14650:2005 |
| DIN EN 14684-2005 | 聚酯纤维绳索.双层编织结构 | Polyester fibre ropes - Double braid construction; German version EN 14684:2004 |
| DIN EN 14685-2005 | 聚酰胺纤维绳索.双层编织结构 | Polyamide fibre ropes - Double braid construction; German version EN 14685:2004 |
| DIN EN 14686-2005 | 聚酯/聚烯烃双纤维的纤维绳索 | Fibre ropes of polyester/polyolefin dual fibres; German version EN 14686:2004 |
| DIN EN 14687-2005 | 混合聚烯烃纤维绳索 | Mixed polyolefin fibre ropes; German version EN 14687:2004 |
| DIN EN 14704-3-2007 | 测定纺织物弹性.第3部分:窄带纤维 | Determination of the elasticity of fabrics - Part 3: Narrow fabrics; English version of DIN EN 14704-3:2007-03 |
| DIN EN 14768-2005 | 纤维板桶.公称容量为5l到600l带滑动盖的可移动顶端(敞口)桶 | Fibreboard drums - Removable head (open head) drums with slip on lids with a nominal capacity of 5 l to 600 l; German version EN 14768:2005 |
| DIN EN 14845-1-2007 | 混凝土纤维试验方法.第1部分:比对混凝土 | Test methods for fibres in concrete - Part 1: Reference concretes; German version EN 14845-1:2007 |
| DIN EN 14845-2-2006 | 混凝土纤维试验方法.第2部分:混凝土效果 | Test methods for fibres in concrete - Part 2: Effect on concrete; English version of DIN EN 14845-2:2006-11 |
| DIN EN 14889-1-2006 | 混凝土纤维.第1部分:钢纤维.定义、规范和一致性 | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity; English version of DIN EN 14889-1:2006-11 |
| DIN EN 14889-2-2006 | 混凝土纤维.第2部分:纤维聚合物.定义、规范和一致性 | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity; English version of DIN EN 14889-2:2006-11 |
| DIN EN 1492-1-2000 | 纺织吊索.安全.第1部分:普通化学纤维织造的带状吊索 | Textile slings - Safety - Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use; German version EN 1492-1:2000 |
| DIN EN 1492-2-2000 | 织物吊索.安全性.第2部分:普通化学纤维制圆吊索 | Textile slings - Safety - Part 2: Roundslings, made of man-made fibres, for general purpose use; German version EN 1492-2:2000 |
| DIN EN 1492-4-2004 | 纺织吊索.安全.第4部分:通用天然和人造纤维绳制起重吊索 | Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes; German version EN 1492-4:2004 |
| DIN EN 15057-2006 | 纤维增强水泥薄板.耐冲击试验方法 | Fibre cement profiled sheets - Impact resistance test method English version of DIN EN 15057:2006-09 |
| DIN EN 15319-2007 | 纤维(石膏)灰泥工程设计的一般原则 | General principles of design of fibrous (gypsum) plaster works; German version EN 15319:2007 |
| DIN EN 1638-1997 | 塑料管道系统.玻璃纤维增强热固性塑料(GFK)管.圆筒内压循环作用试验方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure; German version EN 1638:1997 |
| DIN EN 1787-2000 | 食品.用ESR分光光度法检测经过辐射的含纤维素食品 | Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy; German version EN 1787:2000 |
| DIN EN 181000-1995 | 一般规范.纤维光学分支器; 德文版本 EN 181000:1994 | Generic specification: Fibre optic branching devices; German version EN 181000:1994 |
| DIN EN 181101-1995 | 空白详细规范.纤维光学分支器.型号:非波长选择星型传送器; 德文版本 EN 181101:1994 | Blank detail specification: Fibre optic branching devices - Type: Non wavelength selective transmissive star; German version EN 181101:1994 |
| DIN EN 181102-1995 | 空白详细规范.纤维光学分支器.型号:非波长选择星形传送器; 德文版本 EN 181102:1994 | Blank detail specification: Fibre optic branching devices - Type: Wavelength selective transmissive star; German version EN 181102:1994 |
| DIN EN 1862-1997 | 塑料管道系统.玻璃纤维增强热固性塑料管(GFK).在化学环境下存放后相对蠕变系数的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the relative flexural creep factor following exposure to a chemical environment; German version EN 1862:1997 |
| DIN EN 186260-1998 | 分规范.光学纤维和光纤电缆的连接器装置.SC型 | Sectional specification: Connector sets for optical fibres and cables - Type SC; German version EN 186260:1997 |
| DIN EN 186290-1998 | 分规范.光学纤维和光纤电缆的连接器装置.MPO型 | Sectional specification: Connector sets for optical fibres and cables - Type MPO; German version EN 186290:1997 |
| DIN EN 1916-2003 | 未加筋、钢纤维和加筋混凝土管和配件 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced; German version EN 1916:2002 |
| DIN EN 23035-1994 | 单面和单壁瓦楞纤维纸板.平面耐压碎的测定 (ISO 3035:1982); 德文版本 EN 23035:1994 | Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance (ISO 3035:1982); German version EN 23035:1994 |
| DIN EN 2329-1993 | 航空航天.纺织玻璃纤维预浸带.测定单位面积质量的试验方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of mass per unit area; german version EN 2329:1993 |
| DIN EN 2330-1993 | 航空航天.纺织玻璃纤维预浸带.测定易挥发物质的试验方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the content of volatile matter; german version EN 2330:1993 |
| DIN EN 2331-1993 | 航空航天.纺织玻璃纤维预浸带.测定树脂含量、纤维含量以及单位面积纤维质量的试验方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin and fibre content and mass of fibre per unit area; german version EN 2331:1993 |
| DIN EN 2332-1993 | 航空航天.纺织玻璃纤维预浸带.测定树脂流动的试验方法 | Aerospace series; textile glass fibre preimpregnates; test method for the determination of the resin flow; german version EN 2332:1993 |
| DIN EN 2374-1991 | 航空航天.玻璃纤维增强的模压件和夹芯复合材料.试验板的生产 | Aerospace series; glass fibre-reinforced mouldings and sandwich composites; production of test panels; german version EN 2374:1991 |
| DIN EN 2377-1989 | 航空航天系列.玻璃纤维增强的塑料.外表层间抗剪强度的测定 | Aerospace series; glass fibre reinforced plastics; test method; determination of apparent interlaminar shear strength; german version EN 2377:1989 |
| DIN EN 2378-1995 | 航空航天系列.纤维增强塑料.通过浸入测定吸水量; 德文版本 EN 2378:1995 | Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion; German version EN 2378:1995 |
| DIN EN 2489-1995 | 航空航天系列.纤维增强塑料.试验流体影响的测定; 德文版本 EN 2489:1995 | Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids; German version EN 2489:1995 |
| DIN EN 2557-1997 | 航空航天系列.碳纤维预浸带.单位面积重量测定 | Aerospace series - Carbon fibre preimpregnates - Determination of mass per unit area; German version EN 2557:1997 |
| DIN EN 2558-1997 | 航空航天系列.碳纤维预浸渍物.易挥发成份测定 | Aerospace series - Carbon fibre preimpregnates - Determination of the volatile content; German version EN 2558:1997 |
| DIN EN 2559-1997 | 航空航天系列.碳纤维预浸带.树脂成份、纤维成份以及单位面积纤维重量测定 | Aerospace series - Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area; German version EN 2559:1997 |
| DIN EN 2560-1998 | 航空航天系列.碳纤维预浸渍.树脂流的测定 | Aerospace series - Carbon fibre preimpregnates - Determmination of the resin flow; German version EN 2560:1998 |
| DIN EN 2561-1995 | 航空航天系列.碳素纤维增强塑料.单向塑料层压制品.纤维方向平行抗拉试验; 德文版本 EN 2561:1995 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction; German version EN 2561:1995 |
| DIN EN 2562-1997 | 航空航天系列.碳纤维增强塑料.单向层压塑料.与纤维方向平行的弯曲试验 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; flexural test parallel to the fibre direction; German version EN 2562:1997 |
| DIN EN 2563-1997 | 航空航天系列.碳纤维增强塑料.单向层压制品.表观层压间抗切强度测定 | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates; determination of apparent interlaminar shear strength; German version EN 2563:1997 |
| DIN EN 2564-1998 | 航空航天系列.碳纤维层压塑料.纤维含量、树脂含量和气孔的测定 | Aerospace series - Carbon fibre laminates - Determination of the fibre-, resin- and void contents; German version EN 2564:1998 |
| DIN EN 2597-1998 | 航空航天系列.碳纤维增强的塑料.无向叠层材料.垂直纤维方向的拉力试验 | Aerospace series - Carbon fibre reinforced plastics; unidirectional laminates - Tensile test perpendicular to the fibre direction; German version EN 2597:1998 |
| DIN EN 2743-2003 | 航空航天系列.纤维增强塑料.测试未老化材料前的标准调整程序 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001 |
| DIN EN 2746-1998 | 航空航天系列.玻璃纤维增强的塑料.绕曲试验.三点弯曲试验法 | Aerospace series - Glass fibre reinforced plastics - Flexural test, three point bend method; German version EN 2746:1998 |
| DIN EN 2747-1998 | 航空航天系列.玻璃纤维增强塑料.拉伸试验 | Aerospace series - Glass fibre reinforced plastics - Tensile test; German version EN 2747:1998 |
| DIN EN 300-2006 | 定向纤维板(OSB).定义、分类和规范 | Oriented Strand Boards (OSB) - Definitions, classification and specifications English version of DIN EN 300:2006-09 |
| DIN EN 302-3-2006 | 承重木结构用粘合剂.试验方法.第3部分:通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响.德 | Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength; German version EN 302-3:2004 + A1:2005 |
| DIN EN 316-1999 | 木纤维板.定义、分类和符号 | Wood fibreboards - Definition, classification and symbols; German version EN 316:1999 |
| DIN EN 317-1993 | 木屑板和纤维板.浸水厚度膨胀测定 | Particleboards and fibreboards; determination of swelling in thickness after immersion in water; German version EN 317:1993 |
| DIN EN 319-1993 | 木屑板和纤维板.垂直于板面的抗拉强度测定 | Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board; German version EN 319:1993 |
| DIN EN 320-1993 | 纤维板.螺钉轴向拔出力测定 | Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993 |
| DIN EN 3665-1997 | 航空航天系列.清漆和涂料试验方法.铝合金耐纤维状腐蚀试验 | Aerospace series - Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys; German version EN 3665:1997 |
| DIN EN 3733-008-2007 | 航空航天系列.连续工作温度150°C自锁紧环连接的单路圆形光连接器.第008部分:EN4532(200mu/280mu纤维)的电 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English version EN 3733-008:2006 |
| DIN EN 3733-009-2007 | 航空航天系列.连续工作温度150°C自锁紧环连接的单路圆形光学连接器.第009部分:EN4532(200mu/280mu纤维)的 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard; German and English version EN 3733-009:2006 |
| DIN EN 382-1-1993 | 纤维板.表面吸湿性测定.经干燥处理的纤维板试验方法 | Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993 |
| DIN EN 382-2-1994 | 纤维板.表面吸湿性测定.硬板试验方法 | Fibreboards; determination of surface absorption; part 2: test method for hardboards; German version EN 382-2:1993 |
| DIN EN 40-7-2003 | 灯柱.第7部分:纤维增强聚酯复合灯柱的要求 | Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns; German version EN 40-7:2002 |
| DIN EN 492-2006 | 纤维混凝土石板及配件.产品规范和试验方法 | Fibre cement slates and fittings - Product specification and test methods; German version EN 492:2004 + A1:2005 + A2:2006 |
| DIN EN 494-2007 | 纤维水泥成型薄板及其配件.产品规范和试验方法 | Fibre-cement profiled sheets and fittings - Product specification and test methods; German version EN 494:2004+A1:2005+A2:2006+A3:2007 |
| DIN EN 50223-2001 | 易燃短纤维填料自动静电应用设备 | Automatic electrostatic application equipment for flammable flock material; German version EN 50223:2001 |
| DIN EN 50353-2002 | 绝缘油.用显微镜计数法测定纤维污染 | Insulating oil - Determination of fibre contamination by the counting method using a microscope; German version EN 50353:2001 |
| DIN EN 50377-2-1-2002 | 光纤通信系统接头组件和互连元件.产品规范.第2-1部分:端接在IEC 60793-2 B1类单模纤维上的FC-PC型接头组件 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1: Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre; German version EN 50377-2-1:2001 |
| DIN EN 50377-5-1-2003 | 光纤通信系统中使用的连接器组和互连元件.产品规范.第5-1部分:端接在IEC 60793-2类B.1.1单模纤维上的EC型 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specification - Part 5-1: Type EC terminated on IEC 60793-2, category B1.1 singlemode fibre; German version EN 50377-5-1:2003 |
| DIN EN 50377-7-1-2004 | 光纤通信系统中使用的连接器组件和互连元件.产品规范.第7-1部分:终接在IEC 60793-2 A1a 和 A1b类多模纤维上 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-1: Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre; German version EN 50377-7-1:2004 |
| DIN EN 50377-7-2-2004 | 光纤通信系统中使用的连接器组件和互连元件.产品规范.第7-2部分:终接在IEC 60793-2 B1.1类单模纤维上的LC-P | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 7-2: LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre; German version EN 50377-7-2:2004 |
| DIN EN 50411-2-2-2007 | 光纤通信系统用纤维形成体和闭路.产品规范.第2-2部分:S&A类用1型密封平盖纤维接缝闭路 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-2: Sealed pan fibre splice closures Type 1, for category S & A; German version EN 50411-2-2:2007 |
| DIN EN 50411-2-4-2006 | 用于光纤传递系统的纤维形成体和闭路.产品规范.第2-4部分:S&A类密封圆盖纤维接缝闭路类型1 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4: Sealed dome fibre splice closures Type 1, for category S & A; German version EN 50411-2-4:2006 |
| DIN EN 50414-2007 | 聚氯乙烯绝缘和护套光电纤维电缆中铅含量分析试验方法.方法A:用火焰原子吸收分光光度测定含铅总量.方法B:硫 | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining; German version EN 50414:2006 |
| DIN EN 512-1994 | 纤维混凝土制品.承压管和连接件 | Fibre-cement products - Pressure pipes and joints; German version EN 512:1994 |
| DIN EN 512/A1-2002 | 纤维水泥制品.压力管道和接头.修改件A1:2001; 德文版本 EN 512:1994/A1:2001 | Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001 |
| DIN EN 588-1-1996 | 纤维水泥污水管.第1部分:重力系统用管、连接件和配件 | Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems; German version EN 588-1:1996 |
| DIN EN 588-2-2002 | 排水管和下水道纤维水泥管.第2部分:人孔和检查室 | Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers; German version EN 588-2:2001 |
| DIN EN 59-1977 | 玻璃纤维增强塑料.用巴氏(Barcol)硬度测量仪测定硬度 | Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor |
| DIN EN 60249-2-1-2000 | 印制电路基材.第2部分:规范.第1号规范:高电气质量酚醛纤维素纸覆铜层压板 | Base materials for printed circuits - Part 2: Specifications; Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality (IEC 60249-2-1:1985 + A1:1989 + A2:1993 + A3:1994 + A4:2000); German version EN 60249-2-1:1994 + A2:1994 + Corrig.:1994 + A3:1995 + A4:2000 |
| DIN EN 60249-2-2-2000 | 印制电路基材.第2部分:规范.第2号规范:经济质量酚醛纤维素纸覆铜层压板 | Base materials for printed circuits - Part 2: Specifications; Specification No. 2: Phenolic cellulose paper copper-clad laminated sheet, economic quality (IEC 60249-2-2:1985 + A1:1989 + A2:1990 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-2:1994 + A3:1994 + Corrig.:1994 + A4:1995 + A5:2000 |
| DIN EN 60249-2-3-2000 | 印制电路基材.第2部分:规范.第3号规范:规定易燃性的环氧化合物纤维素纸覆铜层压板(垂直燃烧试验) | Base materials for printed circuits - Part 2: Specifications; Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-3:1987 + A1:1989 + A2:1993 + Corrig.:1994 + A3:1994 + A4:2000); German version EN 60249-2-3:1994 + A2:1994 + Corrig.:1994 + A3:1995 + A4:2000 |
| DIN EN 60249-2-4-2000 | 印制电路基材.第2部分:规范.第4号规范:普通级环氧化合物编织玻璃纤维覆铜层压板 | Base materials for printed circuits - Part 2: Specifications; Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade (IEC 60249-2-4:1987 + A1:1989 + A2:1992 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-4:1994 + A3:1994 + Corrig.:1994 + A4:1995 + A5:2000 |
| DIN EN 60317-0-4-2006 | 特种绕组线规范.第0-4部分:一般要求.玻璃纤维绕组浸树脂或浸清漆裸扁铜线或漆包扁铜线 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-4:1997 + A1:1999 + A2:2005); German version EN 60317-0-4:1998 + A1:2000 + A2:2005 |
| DIN EN 60317-0-5-2007 | 特种绕组线规范.第0-5部分:一般要求.玻璃纤维编织树脂或浸漆的裸或漆包扁铜线 | Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire (IEC 60317-0-5:2006); German version EN 60317-0-5:2007 |
| DIN EN 60317-0-6-2007 | 特种绕组线规范.第0-6部分:一般要求.玻璃纤维包浸树脂或浸清漆的裸圆铜线或漆包圆铜线 | Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-6:2001 + A1:2006); German version EN 60317-0-6:2001 + A1:2006 |
| DIN EN 60317-48-2000 | 特种绕组线规范.第48部分:温度指数155的玻璃纤维缠绕树脂或清漆浸渍裸圆铜线或漆包圆铜线 | Specification for particular types of winding wires - Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:1999); German version EN 60317-48:2000 |
| DIN EN 60317-49-2000 | 特种绕组线规范.第49部分:温度指数180的玻璃纤维绕包树脂或漆浸渍裸或漆包圆铜线 | Specifications for particular types of winding wires - Part 49: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (IEC 60317-49:1999); German version EN 60317-49:2000 |
| DIN EN 60317-50-2000 | 特种绕组线规范.第50部分:温度指数200的玻璃纤维绕包树脂或漆浸渍裸或漆包圆铜线 | Specifications for particular types of winding wires - Part 50: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 (IEC 60317-50:1999); German version EN 60317-50:2000 |
| DIN EN 60450-2005 | 新的和老化的纤维素电气绝缘材料的粘均聚合度测量 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004); German version EN 60450:2004 |
| DIN EN 60454-3-10-1997 | 电工压敏胶带.第3部分:各型材料规范.第10节:带橡胶制热固性胶的醋酸丁酸纤维素薄膜胶带要求 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive (IEC 60454-3-10:1995); German version EN 60454-3-10:1995 |
| DIN EN 60454-3-11-1999 | 电工用压敏胶带.第3部分:各型材料规范.第11页:带热固橡胶胶粘材料的皱折纤维素纸和聚乙烯对酞酸盐薄膜合成 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 11: Combined tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive (IEC 60454-3-11:1998); German version EN 60454-3-11:1998 |
| DIN EN 60454-3-4-1999 | 电工用的热敏性粘胶带.第3部分:单项材料规范.第4页:带热固橡胶粘合剂的纤维素皱纹纸 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Cellulosic paper, creped, with rubber thermosetting adhesive (IEC 60454-3-4:1998); German version EN 60454-3-4:1998 |
| DIN EN 60454-3-5-1999 | 电工用的热敏性粘胶带.第3部分:单项材料规范.第5页:带热固橡胶粘合剂的纤维素非皱纹纸 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials; Sheet 5: Cellulosic paper, non-creped, with rubber thermosetting adhesive (IEC 60454-3-5:1998); German version EN 60454-3-5:1998 |
| DIN EN 60454-3-8 Berichtigung 1-2007 | 电工用压敏粘带.第3部分:单项材料规范.活页8:玻璃布涂压敏粘合剂的和独立的醋酸纤维素或与纤维胶结合的编织 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006); German version EN 60454-3-8:2006, Corrigenda to DIN EN 60454-3-8 (VDE 0340-3-8):2006-12; CENELEC-Corrigendum December 2006 to EN 60454-3-8:2006 |
| DIN EN 60454-3-8-2006 | 电工用压敏胶粘带.第3部分:单项材料规范.活页8:涂有基于玻璃纤维、醋酯纤维素或组合有粘胶纤维的压敏胶粘剂 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-8:2006); German version EN 60454-3-8:2006 |
| DIN EN 60554-2-2002 | 电工用纤维素纸.第2部分:试验方法 (IEC 60554-2:2001); 德文版本 EN 60554-2:2002 | Cellulosic papers for electrical purposes - Part 2: Methods of test (IEC 60554-2:2001); German version EN 60554-2:2002 |
| DIN EN 60684-3-300-2003 | 绝缘软管.第3部分:各型软管规范.300节:无涂层玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002 |
| DIN EN 60684-3-340 bis 342-2004 | 绝缘软套管.第3部分:各种型号套管的规范.第340至342活页:可扩张编织的聚对苯二甲酸乙二醇酯纤维套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving (IEC 60684-3-340 to 342:2003); German version EN 60684-3-340 bis 342:2003 |
| DIN EN 60684-3-343 bis 345-2003 | 绝缘软管.第3部分:各型软管规范.343至345节:无涂层可扩张乙烯三氟氯乙烯纤维编织软管 | Flexible insulating sleeving - Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002 |
| DIN EN 60684-3-400 bis 402-2003 | 绝缘软管.第3部分:各型软管规范.400至402节:带硅弹性涂层的玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating (IEC 60684-3-400 to 402:2002); German version EN 60684-3-400 bis 402:2002 |
| DIN EN 60684-3-403 bis 405-2003 | 绝缘软管.第3部分:各型软管规范.403至405节:丙烯酸酯玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 403 to 405: Glass textile sleeving with acrylic coating (IEC 60684-3-403 to 405:2002); German version EN 60684-3-403 to 405:2002 |
| DIN EN 60684-3-406 bis 408-2004 | 绝缘软管.第3部分:各种型号软管规范.活页406-408:带PVC涂层的玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 406 to 408: Glass textile sleeving with PVC coating (IEC 60684-3-406 bis 408:2003); German version EN 60684-3-406 bis 408:2003 |
| DIN EN 60684-3-420 bis 422-2003 | 绝缘软管.第3部分:各型软管规范.420至422节:丙烯酸酯聚酯纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 420 to 422: Polyethylene terephthalate textile sleeving with acrylic based coating (IEC 60684-3-420 to 422:2002); German version EN 60684-3-420 bis 422:2002 |
| DIN EN 60793-1-20-2002 | 光纤.第1-20部分:测量方法和试验程序.纤维几何形状 (IEC 60793-1-20:2001); 德文版本 EN 60793-1-20:2002 | Optical fibres - Part 1-20: Measurement methods and test procedures; Fibre geometry (IEC 60793-1-20:2001); German version EN 60793-1-20:2002 |
| DIN EN 60793-1-30-2002 | 光纤.第1-30部分:测量方法和试验程序.纤维验证试验 (IEC 60793-1-30:2001); 德文版本 EN 60793-1-30:2002 | Optical fibres - Part 1-30: Measurement methods and test procedures; Fibre proof test (IEC 60793-1-30:2001); German version EN 60793-1-30:2002 |
| DIN EN 60793-1-34-2007 | 光纤.第1-34部分:测量方法和试验程序.纤维卷曲(IEC 60793-1-34-2006) | Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl (IEC 60793-1-34:2006); German version EN 60793-1-34:2006 |
| DIN EN 60793-1-41-2004 | 光学纤维.第1-41部分:测量方法和试验程序.频带宽度 | Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth (IEC 60793-1-41:2003); German version EN 60793-1-41:2003 |
| DIN EN 60793-2-2004 | 光学纤维.第2部分:产品规范.总则 | Optical fibres - Part 2: Product specifications - General (IEC 60793-2:2003); German version EN 60793-2:2004 |
| DIN EN 60793-2-40-2007 | 光纤.第2-40部分:产品规范.A4类别的多模纤维分规范(IEC 60793-2-40-2006) | Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres (IEC 60793-2-40:2006); German version EN 60793-2-40:2006 |
| DIN EN 60793-2-50-2005 | 光学纤维.第2-50部分:产品规范.B级单模光纤分规范 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres (IEC 60793-2-50:2004); German version EN 60793-2-50:2004 + Corrigendum:2004 |
| DIN EN 60794-2-10-2003 | 光学纤维电缆.第2-10部分:室内光缆.单工光缆和双工光缆的系列规范 | Optical fibre cables - Part 2-10: Indoor cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2003); German version EN 60794-2-10:2003 |
| DIN EN 60794-2-20-2003 | 光学纤维电缆.第2-20部分:室内光缆.多纤配线电缆的系列规范 | Optical fibre cables - Part 2-20: Indoor cables; Family specification for multi-fibre optical distribution cables (IEC 60794-2-20:2003); German version EN 60794-2-20:2003 |
| DIN EN 60794-2-30-2003 | 光学纤维电缆.第2-30部分:室内光缆.带状光缆系列规范 | Optical fibre cables - Part 2-30: Indoor cables; Family specification for optical fibre ribbon cables (IEC 60794-2-30:2003); German version EN 60794-2-30:2003 |
| DIN EN 60794-2-31-2006 | 光学纤维电缆.第2-31部分:室内电缆.建筑群布缆用光纤带状电缆的详细规范(IEC 60794-2-31:2005) | Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling (IEC 60794-2-31:2005); German version EN 60794-2-31:2006 |
| DIN EN 60819-1-1997 | 非纤维素电工纸.第1部分:定义和一般要求 | Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements (IEC 60819-1:1995 + A1:1996); German version EN 60819-1:1995 + A1:1996 |
| DIN EN 60819-2-2002 | 电工用非纤维素纸.第2部分:试验方法 | Non-cellulosic papers for electrical purposes - Part 2: Methods of test (IEC 60819-2:2001); German version EN 60819-2 2001 |
| DIN EN 60819-3-1-2002 | 电工用非纤维素纸.第3部分:专用材料规范:第1页:填充玻璃纸 (IEC 60819-3-1:2001); 德文版本 EN 60819-3-1:2 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Filled glass paper (IEC 60819-3-1:2001); German version EN 60819-3-1:2001 |
| DIN EN 60819-3-2-2002 | 电工用非纤维素纸.第3部分:专用材料规范:第2页:混合式无机-有机纸 (IEC 60819-3-2:2001); 德文版本 EN 6081 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Hybrid inorganic-organic paper (IEC 60819-3-2:2001); German version EN 60819-3-2:2001 |
| DIN EN 60819-3-3-2007 | 电工用非纤维素纸.第3部分:单项材料规范.活页3:非填充聚芳酰胺纸 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers (IEC 60819-3-3:2006); German version EN 60819-3-3:2006 |
| DIN EN 60819-3-4-2002 | 电工用非纤维素纸.第3部分:专用材料规范:第4页:含有不超过50%云母颗粒的芳族聚酰胺纤维纸 (IEC 60819-3-4:2 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles (IEC 60819-3-4:2001); German version EN 60819-3-4:2001 |
| DIN EN 60869-1-2001 | 纤维光学衰减器.第1部分:总规范 | Fibre optic attenuators - Part 1: Generic specification (IEC 60869-1:1999); German version EN 60869-1:2000 |
| DIN EN 60874-1-2007 | 纤维光学和光缆的连接器.第1部分:总规范 | Connectors for optical fibres and cables - Part 1: Generic specification (IEC 60874-1:2006); German version EN 60874-1:2007 |
| DIN EN 61067-1-1998 | 玻璃和玻璃聚酯纤维编织带规范.第1部分:定义、分类和一般要求 | Specification for glass and glass polyester fibre woven tapes - Part 1: Definitions, classification and general requirements (IEC 61067-1:1991); German version EN 61067-1:1997 |
| DIN EN 61067-2-1998 | 玻璃和玻璃聚酯纤维编织带规范.第2部分:试验方法 | Specification for glass and glass polyester fibre woven tapes - Part 2: Methods of test (IEC 61067-2:1992); German version EN 61067-2:1997 |
| DIN EN 61067-3-1-1998 | 玻璃和玻璃聚酯纤维编织带规范.第3部分:各型材料规范.第1节:1、2、3型织带 | Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials; Sheet 1: Type 1, 2 and 3 tapes (IEC 61067-3-1:1995); German version EN 61067-3-1:1995 |
| DIN EN 61068-1-1998 | 聚酯纤维编织带规范.第1部分:定义、命名和一般要求 | Specification for polyester fibre woven tapes - Part 1: Definitions, designation and general requirements (IEC 61068-1:1991); German version EN 61068-1:1997 |
| DIN EN 61068-2-1998 | 聚酯纤维编织带规范.第2部分:试验方法 | Specification for polyester fibre woven tapes - Part 2: Methods of test (IEC 61068-2:1991); German version EN 61068-2:1997 |
| DIN EN 61068-3-1-1998 | 聚酯纤维编织带.第3部分:各型材料规范.第1节:常规或无梭织机编织带 | Polyester fibre woven tapes - Part 3: Specifications for individual materials; Sheet 1: Tapes woven on conventional or shuttleless looms (IEC 61068-3-1:1995); German version EN 61068-3-1:1995 |
| DIN EN 61197-1996 | 绝缘油.火焰线性传播.玻璃纤维试验方法 | Insulating liquids - Linear flame propagation - Test methods using a glass-fibre tape (IEC 61197:1993); German version EN 61197:1994 |
| DIN EN 61202-1-2001 | 纤维光绝缘子.第1部分:一般规范 | Fibre optic isolators - Part 1: Generic specification (IEC 61202-1:2000); German version EN 61202-1:2000 |
| DIN EN 61249-2-1-2005 | 印制板和其它互连结构用材料.第2-1部分:包被和非包被增强基材.经济级包铜酚醛纤维素纸增强叠层板材 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad (IEC 61249-2-1:2005); German version EN 61249-2-1:2005 |
| DIN EN 61249-2-10 Berichtigung 1-2005 | 印制板和其它互联结构用材料.第2-10部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被改良或未改良的 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad; (IEC 61249-2-10:2003); German version EN 61249-2-10:2003, Corrigenda to DIN EN 61249-2-10:2004-01 |
| DIN EN 61249-2-10-2004 | 印制板和其它互连结构用材料.第2-10部分:包被和非包被增强基材.规定了易燃性的包铜的改良或未改良的氰酸酯 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad - Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-10:2003); German version EN 61249-2-10:2003 |
| DIN EN 61249-2-11 Berichtigung 1-2005 | 印制板和其他互联结构用材料.第2-11部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的聚酰亚胺溴化 | Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad(IEC 61249-2-11:2003); German version EN 61249-2-11:2003, Corrigenda to DIN EN 61249-2-11:2004-06 |
| DIN EN 61249-2-11-2004 | 印制板和其它互连结构用材料.第2-11部分:包被和非包被增强基材料.阻燃型铜包被的聚酰亚胺溴化环氧改良或非 | Materials for printed boards and other interconnecting structures - Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-11:2003); German version EN 61249-2-11:2003 |
| DIN EN 61249-2-18-2002 | 印制板和其它互连结构用材料.第2-18部分:包层或非包层增强式基材料.规定的可燃性包铜聚酯非编织玻璃纤维增 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials clad and unclad; Polyester non-woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-18:2002); German version EN 61249-2-18:2002 |
| DIN EN 61249-2-19-2002 | 印制板和其它互连结构用材料.第2-19部分:包层和非包层增强式基材料.规定的可燃性环氧交叉帘布层线性加筋纤 | Materials for printed boards and other interconnecting structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad (IEC 61249-2-19:2001); German version EN 61249-2-19:2002 |
| DIN EN 61249-2-2-2005 | 印制板和其它互连结构用材料.第2-2部分:包被和非包被增强基材.高电气级包铜酚醛纤维素纸增强叠层板材 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad (IEC 61249-2-2:2005); German version EN 61249-2-2:2005 |
| DIN EN 61249-2-21-2004 | 印制板和其它互连结构用材料.第2-21部分:包被和非包被增强基材料.阻燃型铜包被的非卤代环氧编织E型玻璃纤维 | Materials for printed boards and other interconnecting structures - Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-21:2003); German version EN 61249-2-21:2003 |
| DIN EN 61249-2-22-2005 | 印制板和其他互连结构用材料.第2-22部分:包被和非包被增强基材.阻燃型铜包被的改良非卤化环氧编织E型玻璃纤 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-22:2005); German version EN 61249-2-22:2005 |
| DIN EN 61249-2-23-2005 | 印制板和其他互连结构用材料.第2-23部分:包被和非包被增强基材.经济级包铜非卤化酚醛纤维素纸增强层压板材 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad (IEC 61249-2-23:2005); German version EN 61249-2-23:2005 |
| DIN EN 61249-2-26-2005 | 印制板和其他互连结构用材料.第2-26部分:包被和非包被增强基材.阻燃型铜包被的非卤化环氧非编织/编织E型玻 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-26:2005); German version EN 61249-2-26:2005 |
| DIN EN 61249-2-4-2002 | 印制板和其它互连结构用材料.第2-4部分:包层和非包层增强式基材料.规定的可燃性包铜聚酯非编织/编织玻璃纤 | Materials for printed boards and other for interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-wowen/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad (IEC 61249-2-4:2001); German version EN 61249-2-4:2002 |
| DIN EN 61249-2-5 Berichtigung 1-2005 | 印制板和其他互联结构用材料.第2-5部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的溴化环氧纤维素 | Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-5:2003); German version EN 61249-2-5:2003, Corrigenda to DIN EN 61249-2-5:2004-06 |
| DIN EN 61249-2-5-2004 | 印制板和其它互连结构用材料.第2-5部分:包被和非包被增强基材料.阻燃型铜包被的溴化环氧纤维素纸增强芯/编 | Materials for printed boards and other interconnecting structures - Part 2-5: Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-5:2003); German version EN 61249-2-5:2003 |
| DIN EN 61249-2-6-2004 | 印制板和其它互连结构用材料.第2-6部分:包被和非包被增强基材料.阻燃型铜包被的溴化环氧非编织/编织E型玻璃 | Materials for printed boards and other interconnecting structures - Part 2-6: Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-6:2003); German version EN 61249-2-6:2003 |
| DIN EN 61249-2-8-2004 | 印制板和其它互连结构用材料.第2-8部分:包被和非包被增强基材.规定了易燃性的包铜的改良溴化环氧树脂编织玻 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials, clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-8:2003); German version EN 61249-2-8:2003 |
| DIN EN 61249-2-9-2004 | 印制板和其它互连结构用材料.第2-9部分:包被和非包被增强基材.规定了易燃性的包铜的二顺丁烯二酰亚胺/三嗪 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad (IEC 61249-2-9:2003); German version EN 61249-2-9:2003 |
| DIN EN 61274-1-1-2007 | 纤维光学连接器用适配器.第1-1部分:空白详细规范 | Adaptors for fibre optic connectors - Part 1-1: Blank detail specification (IEC 61274-1-1:2006); German version EN 61274-1-1:2006 |
| DIN EN 61280-1-1-1999 | 纤维光学通信子系统基本试验程序.第1部分:一般通信子系统的试验程序 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable (IEC 61280-1-1:1998); German version EN 61280-1-1:1998 |
| DIN EN 61280-1-4-2003 | 光纤通信子系统试验程序.第1-4部分:一般通信子系统.多模纤维激光发射机用二维近场数据的采集和整理 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters (IEC 61280-1-4:2003); German version EN 61280-1-4:2003 |
| DIN EN 61280-2-1-1999 | 纤维光学通信子系统基本试验程序.第2-1部分:数字系统的试验程序.接收机灵敏度和过载测量 | Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems; receiver sensitivity and overload measurement (IEC 61280-2-1:1998); German version EN 61280-2-1:1999 |
| DIN EN 61280-2-10-2006 | 纤维光学通信子系统试验程序.第2-10部分:数字系统.激光发射机的时间分辨线性调频脉冲和α因数测量(IEC 6128 | Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters (IEC 61280-2-10:2005); German version EN 61280-2-10:2005 |
| DIN EN 61280-2-4-1999 | 纤维光学通信子系统基本试验程序.第2-4部分:数字系统试验程序.比特率容差测量 | Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems; bit-rate tolerance measurement (IEC 61280-2-4:1998); German version EN 61280-2-4:1998 |
| DIN EN 61280-2-5-1999 | 纤维光学通信子系统基本试验程序.第2-5部分:数字系统试验程序.抖动转移功能的测量 | Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems; jitter transfer function measurement (IEC 61280-2-5:1998); German version EN 61280-2-5:1998 |
| DIN EN 61280-2-8-2004 | 纤维光学通信子系统试验程序.数字系统.第2-8部分:用品质因数测量法测定低位错率 | Fibre optic communication subsystem test procedures - Digital systems - Part 2-8: Determination of low BER using Q-factor measurements (IEC 61280-2-8:2003); German version EN 61280-2-8:2003 |
| DIN EN 61290-3-2-2003 | 光学（纤维）放大器.第3-2部分:噪音数字参数的试验方法.电频谱分析仪法 | Optical amplifiers - Part 3-2: Test methods for noise figure parameters - Electrical spectrum analyzer method (IEC 61290-3-2:2003); German version EN 61290-3-2:2003 |
| DIN EN 61300-1-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第1部分:总则和指南 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance (IEC 61300-1:2003); German version EN 61300-1:2003 |
| DIN EN 61300-2-1-2003 | 纤维光学互连装置和无源部件.基本试验和测量步骤.第2-1部分:振动(正弦)试验 | Fibre Optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests; Vibration (sinusoidal) (IEC 61300-2-1:2003); German version EN 61300-2-1:2003 |
| DIN EN 61300-2-16-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-16部分:试验.霉菌生长 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16: Tests - Mould growth (IEC 61300-2-16:2006); German version EN 61300-2-16:2006 |
| DIN EN 61300-2-18-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-18部分:试验.干热.耐高温性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance (IEC 61300-2-18:2005); German version EN 61300-2-18:2005 |
| DIN EN 61300-2-33-2007 | 纤维光学互联装置和无源部件.基本试验和测量程序.第2-33部分:试验.纤维光学外壳的安装和拆卸 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic closures (IEC 61300-2-33:2006); German version EN 61300-2-33:2007 |
| DIN EN 61300-2-37-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-37部分:试验.纤维光学外壳的光缆弯曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures (IEC 61300-2-37:2006); German version EN 61300-2-37:2007 |
| DIN EN 61300-2-38-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-38部分:试验.加压纤维光学接线盒的密封 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures (IEC 61300-2-38:2006); German version EN 61300-2-38:2006 |
| DIN EN 61300-2-4-1998 | 光纤互联装置和无源部件.基本试验和测量程序.第2-4部分:试验:纤维/电缆牢固性 (IEC 61300-2-4:1995); 德文 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests: Fibre/cable retention (IEC 61300-2-4:1995); German version EN 61300-2-4:1997 |
| DIN EN 61300-2-44-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-44部分:试验.纤维光学器件应力消除的挠曲(IEC 61300-2 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices (IEC 61300-2-44:2004); German version EN 61300-2-44:2005 |
| DIN EN 61300-2-46-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-46部分:试验.湿气热循环 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic (IEC 61300-2-46:2006); German version EN 61300-2-46:2006 |
| DIN EN 61300-2-47-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-47部分:试验.热冲击 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2006); German version EN 61300-2-47:2007 |
| DIN EN 61300-2-48-2003 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-48部分:试验.温度-湿度循环 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests; Temperature-humidity cycling (IEC 61300-2-48:2003); German version EN 61300-2-48:2003 |
| DIN EN 61300-3-10-2007 | 纤维光学互联装置和无源部件.基本试验和测量程序.第3-10部分:检验和测量.量规的保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force (IEC 61300-3-10:2006); German version EN 61300-3-10:2007 |
| DIN EN 61300-3-14-2007 | 纤维光学互连装置和无源元件.基本试验和测量程序.第3-14部分:检验和测量.可变衰减器衰减设置的精确性和重复 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator (IEC 61300-3-14:2006); German version EN 61300-3-14:2007 |
| DIN EN 61300-3-15-2007 | 纤维光学互连装置和无源元件.基本试验和测量程序.第3-15部分:检验和测量.凸形抛光金属环端面圆顶偏心率(IEC | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface (IEC 61300-3-15:2006); German version EN 61300-3-15:2007 |
| DIN EN 61300-3-17-2000 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-17部分:检查和测量.角度抛光套圈的端面角 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements; endface angle of angle-polished ferrules (IEC 61300-3-17:1999); German version EN 61300-3-17:1999 |
| DIN EN 61300-3-2-2000 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-2部分:检查和测量.单模纤维光学器件衰减偏振函数 | Fibre optic interconnecting devices and passive components - Basic tests and measurement procedures - Part 3-2: Examinations and measurements; polarization dependence of attenuation in a single-mode fibre optic device (IEC 61300-3-2:1999); German version EN 61300-3-2:1999 |
| DIN EN 61300-3-20-2002 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-20部分:检查和测量.光纤分路设备的指向性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices (IEC 61300-3-20:2001); German version EN 61300-3-20:2001 |
| DIN EN 61300-3-23-1999 | 光纤互联装置和无源部件.基本试验和测量程序.第2-23部分:检验和测量.相对于金属端面的纤维位置 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface (IEC 61300-3-23:1998); German version EN 61300-3-23:1998 |
| DIN EN 61300-3-24-2007 | 纤维光学互联装置和无源部件.基本试验和测量程序.第3-24部分:检验和测量.极性维护光纤用光学连接器关键精度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre (IEC 61300-3-24:2006); German version EN 61300-3-24:2007 |
| DIN EN 61300-3-29-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-29部分:检查和测量.表征DWDM元件的光谱传输功能振幅的 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components (IEC 61300-3-29:2005); German version EN 61300-3-29:2006 |
| DIN EN 61300-3-3-2003 | 纤维光学互连装置和无源元件.基本试验和测量步骤.第3-3部分:检验和测量.衰减和回波损耗中变化的动态监控 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements; Active monitoring of changes in attenuation and return loss (IEC 61300-3-3:2003); German version EN 61300-3-3:2003 |
| DIN EN 61300-3-31-2003 | 光纤互连装置和无源部件.基本试验和测量程序.第3-31部分:检验和测量.纤维光学源的耦合功率比测量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources (IEC 61300-3-31:2003); German version EN 61300-3-31:2003 |
| DIN EN 61300-3-33-2000 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-33部分:套管拔出力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements; ferrule withdrawal force (IEC 61300-3-33:1999); German version EN 61300-3-33:1999 |
| DIN EN 61300-3-37-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-37部分:检查和测量.光学纤维角度抛光端面的曲率角度(I | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres (IEC 61300-3-37:2005); German version EN 61300-3-37:2005 |
| DIN EN 61300-3-40-1998 | 光纤互联装置和无源元件.基本试验和测量程序.第3-40部分:检验和测量.带极化保持(PM)纤维引线的连接器的衰减 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements; Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector (IEC 61300-3-40:1998); German version EN 61300-3-40:1998 |
| DIN EN 61300-3-6-2003 | 纤维光学互连装置和无源元件.基本试验和测量步骤.第3-6部分:检验和测量.回波损耗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements; Return loss (IEC 61300-3-6:2003); German version EN 61300-3-6:2003 |
| DIN EN 61753-022-2-2003 | 光纤互连装置和无源部件性能标准.第022-2部分:C类多模纤维与光纤连接器的端接.受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 022-2: Fibre optic connectors terminates on multimode fibre for category C - Controlled environment (IEC 61753-022-2:2003); German version EN 61753-022-2:2003 |
| DIN EN 61753-051-3-2002 | 光纤互连装置和无源部件性能标准.第051-3部分:U类非受控环境用插销固定式衰减器单模纤维 (IEC 61753-051-3: | Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U; Uncontrolled environment (IEC 61753-051-3:2001); German version EN 61753-051-3:2002 |
| DIN EN 61753-052-3-2002 | 光纤互连装置和无源部件性能标准.第052-3部分:U类非受控环境用辫子管固定式衰减器单模纤维 (IEC 61753-052- | Fibre optic interconnecting devices and passive components performance standard - Part 052-3: Single-mode fibre, pigtailed-style fixed attenuators for category U; Uncontrolled environment (IEC 61753-052-3:2001); German version EN 61753-052-3:2002 |
| DIN EN 61753-053-3-2004 | 纤维光学互连器件和无源元件性能标准.第053-3部分:U类连续可变衰减器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment (IEC 61753-053-3:2004); German version EN 61753-053-3:2004 |
| DIN EN 61753-061-3-2005 | 纤维光学互连器件和无源元件性能标准.第061-3部分:U类单模纤维光学有抽头的隔离器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment (IEC 61753-061-3:2004); German version EN 61753-061-3:2004 |
| DIN EN 61753-091-3-2005 | 纤维光学互连器件和无源元件性能标准.第091-3部分:U类单模纤维光学有抽头的循环器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment (IEC 61753-091-3:2004); German version EN 61753-091-3:2004 |
| DIN EN 61753-101-2-2007 | 纤维光学互连器件和无源元件性能标准.第101-2部分:C类光纤管理系统.受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for category C - Controlled environment (IEC 61753-101-2:2006); German version EN 61753-101-2:2006 |
| DIN EN 61753-2-1-2001 | 光纤互连装置和无源部件性能标准.第2-1部分:端接于U级单模纤维的光纤连接器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U; Uncontrolled environment (IEC 61753-2-1:2000); German version EN 61753-2-2-1:2000 |
| DIN EN 61753-2-3-2002 | 纤维光学互连器件和无源元件性能标准.第2-3部分:U类非连接单模1濶 和 2濶非可选波长分路器件.非控制环境 | Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-connectorised single-mode 1×N and 2×N non-wavelength-selective branching devices for category U; Uncontrolled environment (IEC 61753-2-3:2001); German version EN 61753-2-3:2001 |
| DIN EN 61754-12-2000 | 纤维光学连接器接口.第12部分:FS型连接器门类 | Fibre optic connector interfaces - Part 12: Type FS connector family (IEC 61754-12:1999); German version EN 61754-12:1999 |
| DIN EN 61754-13-2006 | 纤维光学连接器接口.第13部分:FC-PC型连接器门(IEC 61754-13-2006) | Fibre optic connector interfaces - Part 13: Type FC-PC connector (IEC 61754-13:2006); German version EN 61754-13:2006 |
| DIN EN 61754-16-2000 | 纤维光学连接器接口.第16部分:PN型连接器门类 | Fibre optic connector interfaces - Part 16: Type PN connector family (IEC 61754-16:1999); German version EN 61754-16:2000 |
| DIN EN 61754-21-2005 | 纤维光学连接器接口.第21部分:塑料光纤用SMI型连接器门类 | Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre (IEC 61754-21:2005); German version EN 61754-21:2005 |
| DIN EN 61754-22-2006 | 纤维光学连接器接口.第22部分:F-SMA型连接器门类 | Fibre optic connector interfaces - Part 22: Type F-SMA connector family (IEC 61754-22:2005); German version EN 61754-22:2005 |
| DIN EN 61754-23-2006 | 纤维光学连接器接口.第23部分:LX.5型连接器门类 | Fibre optic connector interfaces - Part 23: Type LX.5 connector family (IEC 61754-23:2005); German version EN 61754-23:2005 |
| DIN EN 61754-4-1-2003 | 纤维光学连接器接口.第4-1部分:SC型连接器系列.简化的SC-PC型连接器插座接口 | Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptacle SC-PC connector interfaces (IEC 61754-4-1:2003); German version EN 61754-4-1:2003 |
| DIN EN 61754-6-2005 | 纤维光学连接器接口.第6部分:MU型连接器类 | Fibre optic connector interfaces - Part 6: Type MU connector family (IEC 61754-6:1997 + A1:2001 + A2:2004); German version EN 61754-6:1997 + A1:2001 + A2:2005 |
| DIN EN 61754-7-2005 | 纤维光学连接器接口.第7部分:MPO型连接器类 | Fibre optic connector interfaces - Part 7: Type MPO connector family (IEC 61754-7:2004); German version EN 61754-7:2005 |
| DIN EN 61755-1-2006 | 纤维光学连接器的接口.第1部分:单一模式非散射移位纤维的光学接口.总则和指南(IEC 61755-1:2005) | Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance (IEC 61755-1:2005); German version EN 61755-1:2006 |
| DIN EN 61755-2-1-2007 | 纤维光学连接器光学接口.第2-1部分:单模非物理角接触光纤标准光学接口 | Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres (IEC 61755-2-1:2006); German version EN 61755-2-1:2006 |
| DIN EN 61755-2-2-2007 | 纤维光学连接器光学接口.第2-2部分:标准单模成角物理接触光纤用光学接口 | Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres (IEC 61755-2-2:2006); German version EN 61755-2-2:2006 |
| DIN EN 61755-3-5-2007 | 纤维光学连接器光学接口.第3-5部分:光学接口.单模光纤用直径为2.5mm和1.25mm、铜-镍合金包覆光纤材料的圆柱 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-5:2006); German version EN 61755-3-5:2006 |
| DIN EN 61755-3-6-2007 | 纤维光学连接器的光学接口.第3-6部分:光学接口.使用铜-镍合金作为单模纤维光纤接口材料用的直径2.5mm和1.25 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6:2006); German version EN 61755-3-6:2006 |
| DIN EN 61756-1-2007 | 光纤互连设备和无源元器件.纤维管理系统的接口标准.第1部分:总则和指南 | Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance (IEC 61756-1:2006); German version EN 61756-1:2006 |
| DIN EN 61757-1-1999 | 纤维光学传感器.第1部分:总规范(IEC 61757-1-1998) | Fibre optic sensors - Part 1: Generic specification (IEC 61757-1:1998); German version EN 61757-1:1999 |
| DIN EN 62005-7-2004 | 纤维光学互连器件和无源光学元件的可靠性.第7部分:寿命应力模型 | Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling (IEC 62005-7:2004); German version EN 62005-7:2004 |
| DIN EN 62148-11-2004 | 纤维光学有源元件及器件.包装和接口标准.第14部分:14针集成调制器激光二极管发射器 | Fibre optic active components and devices - Package and interface standards - Part 11: 14-pin modulator-integrated laser diode transmitters (IEC 62148-11:2003); German version EN 62148-11:2003 |
| DIN EN 62148-4-2004 | 纤维光学有源元件及器件.包装和接口标准.第4部分:PN 1x9塑料光纤无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 4: PN 1x9 plastic optical fibre transceivers (IEC 62148-4:2003); German version EN 62148-4:2003 |
| DIN EN 62148-6-2004 | 纤维光学有源元件及器件.包装和接口标准.第6部分:ATM-PON无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers (IEC 62148-6:2003); German version EN 62148-6:2003 |
| DIN EN 62148-7-2003 | 纤维光学有源元件及器件.包装和接口标准.第7部分:SFF LC 10针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 7: SFF LC 10-pin transceivers (IEC 62148-7:2003); German version EN 62148-7:2003 |
| DIN EN 62149-1-2004 | 纤维光学有源元件和器件.性能标准.第1部分:总则和指南 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance (IEC 62149-1:2004 + Corrigendum 2004); German version EN 62149-1:2004 |
| DIN EN 62149-3-2004 | 纤维光学有源元件和器件.性能标准.第3部分:2.5Gbit/s调制器-集成激光二极管发射机 | Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters (IEC 62149-3:2004); German version EN 62149-3:2004 |
| DIN EN 62149-4-2003 | 光纤有源元件及器件.性能标准.第4部分:千兆比特以太网用1300nm纤维光学无线电收发信机 | Fibre optic active components and devices - Performance standards - Part 4: 1300 nm fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2003 + Corrigendum 2003); German version EN 62149-4:2003 |
| DIN EN 62149-5-2004 | 纤维光学有源元件及器件.性能标准.第5部分:带LD驱动和CDR IC的ATM-PON无线电收发信机 | Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs (IEC 62149-5:2003); German version EN 62149-5:2003 |
| DIN EN 62149-6-2004 | 纤维光学有源元件及器件.性能标准.第6部分:650-nm 250-Mbit/s塑料光纤无线电收发信机 | Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers (IEC 62149-6:2003); German version EN 62149-6:2003 |
| DIN EN 62150-1-2005 | 纤维光学有源元件和器件.试验和测量规程.第1部分:总则和指南(IEC 62150-1-2005)；德文版本 EN 62150-1-2005 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance (IEC 62150-1:2005); German version EN 62150-1:2005 |
| DIN EN 62150-2-2005 | 纤维光学有源元件和器件.试验和测量规程.第2部分:ATM-POM无线电收发信机 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers (IEC 62150-2:2004); German version EN 62150-2:2004 |
| DIN EN 622-1-2003 | 纤维板.规范.第1部分:一般要求 | Fibreboards - Specifications - Part 1: General requirements; German version EN 622-1:2003 |
| DIN EN 622-2 Berichtigung 1-2006 | 纤维板.规范.第2部分:硬质纤维板的一般要求.德文版本EN 622-2-2004对DIN EN 622-2-2004的勘误; | Fibreboards - Specifications - Part 2: Requirements for hardboards - German version EN 622-2:2004, Corrigenda to DIN EN 622-2:2004-07; German version EN 622-2:2004/AC:2005 |
| DIN EN 622-2-2004 | 纤维板.规范.第2部分:硬质纤维板的要求 | Fibreboards - Specifications - Part 2: Requirements for hardboards; German version EN 622-2:2004 |
| DIN EN 622-3-2004 | 纤维板.规范.第3部分:中硬度板的要求 | Fibreboards - Specifications - Part 3: Requirements for medium boards; German version EN 622-3:2004 |
| DIN EN 622-4-1997 | 纤维板.规范.第4部分:多孔板要求 | Fibreboards - Specifications - Part 4: Requirements for softboards; German version EN 622-4:1997 |
| DIN EN 622-5-2006 | 纤维板.规范.第5部分:干燥处理要求(MDF) | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) English version of DIN EN 622-5:2006-09 |
| DIN EN 637-1994 | 塑料管道系统.玻璃纤维增强塑料部件.用重力测量法对成分含量的测定; 德文版本 EN 637:1994 | Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method; German version EN 637:1994 |
| DIN EN 705-1994 | 塑料管道系统.玻璃纤维增强热固塑料管和管件.回归分析和应用方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use; German version EN 705:1994 |
| DIN EN 872-2005 | 水质.悬浮固体的测量.玻璃纤维过滤器的过滤方法 | Water quality - Determination of suspended solids - Method by filtration through glass fibre filters; German version EN 872:2005 |
| DIN EN ISO 10306-1995 | 纺织品.棉纤维。成熟度的气流法评定 | Textiles - Cotton fibres - Evaluation of maturity by the air flow method (ISO 10306:1993); German version EN ISO 10306:1995 |
| DIN EN ISO 10350-2-2001 | 塑料.可比单点数据的采集和表示.第2部分:长纤维增强塑料 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001); German version EN ISO 10350-2:2001 |
| DIN EN ISO 10352-1997 | 纤维增强塑料.模制化合物和聚酯胶片.单位面积质量测定 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area (ISO 10352:1997); German version EN ISO 10352:1997 |
| DIN EN ISO 105-X13-1997 | 纺织品.色牢度试验.第X13部分:棉纤维物化学处理产生的折缝、打褶和定型工艺的色牢度 | Textiles - Tests for colour fastness - Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting (ISO 105-X13:1994); German version EN ISO 105-X13:1997 |
| DIN EN ISO 105-Z03-1998 | 纺织品.色牢度试验.第Z03部分:聚丙烯腈纤维用基本染料的互溶性 | Textiles - Tests for colour fastness - Part Z03: Intercompatibility of basic dyes for acrylic fibres (ISO 105-Z03:1996); German version EN ISO 105-Z03:1998 |
| DIN EN ISO 10548-2003 | 碳纤维.尺寸的测定 | Carbon fibre - Determination of size content (ISO 10548:2002); German version EN ISO 10548:2003 |
| DIN EN ISO 1061-2000 | 塑料.不增塑的乙酸纤维素.游离酸度的测定 | Plastics - Unplasticized cellulose acetate - Determination of free acidity (ISO 1061:1990); German version EN ISO 1061:1999 |
| DIN EN ISO 10618-2004 | 碳纤维.树脂浸渍纱拉伸性能的测定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004); German version EN ISO 10618:2004 |
| DIN EN ISO 1140-2005 | 纤维绳索.聚酰胺.3、4和8股绞绳 | Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes (ISO 1140:2004); German version EN ISO 1140:2004 |
| DIN EN ISO 1141-2005 | 纤维绳索.聚酯.3、4和8股绞绳 | Fibre ropes - Polyester - 3-, 4- and 8-strand ropes (ISO 1141:2004); German version EN ISO 1141:2004 |
| DIN EN ISO 11667-1999 | 纤维增强塑料.模塑化合物和聚酯胶片.树脂、增强纤维和矿物填料含量的测定.溶解方法 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999 |
| DIN EN ISO 1172-1998 | 纺织玻璃纤维增强塑料.预浸料坯,模塑化合物及叠层板材.纺织玻璃纤维和矿物填充料含量的测定.煅烧法 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998 |
| DIN EN ISO 11721-1-2001 | 织物.含纤维素织物耐微生物性测定.土埋试验.第1部分:腐烂延迟评定 | Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001); German version EN ISO 11721-1:2001 |
| DIN EN ISO 11721-2-2003 | 纺织品.纤维素纺织品抗菌性的测定.土埋试验.第1部分:防腐处理长期性鉴定 | Textiles - Determination of the resistance of cellulose containing textiles to microorganisms; Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish (ISO 11721-2:2003); German version EN ISO 11721-2:2003 |
| DIN EN ISO 1181-2005 | 纤维绳索.马尼拉麻和西沙尔麻绳索.3、4和8股绳 | Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes (ISO 1181:2004); German version EN ISO 1181:2004 |
| DIN EN ISO 12114-1997 | 纤维增强塑料.热固性模塑化合物和聚酯胶片.固化特性测定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997 |
| DIN EN ISO 12115-1997 | 纤维增强塑料.热固性模塑化合物和聚酯胶片.流动性、熟化和使用寿命测定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997 |
| DIN EN ISO 12215-1-2001 | 小型船舶.船体建造和草图.第1部分:材料.玻璃纤维增强热固树脂标准层压板 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); German version EN ISO 12215-1:2000 |
| DIN EN ISO 13002-1999 | 碳纤维.长丝纱的命名体系 | Carbon fibre - Designation system for filament yarns (ISO 13002:1998); German version EN ISO 13002:1998 |
| DIN EN ISO 1346-2005 | 纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3)绳索.3、4和8股绳索 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes (ISO 1346:2004); German version EN ISO 1346:2004 |
| DIN EN ISO 14125-1998 | 纤维增强塑料.弯曲性能测定 | Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998); German version EN ISO 14125:1998 |
| DIN EN ISO 14126-2000 | 纤维增强塑料混合物.水平方向压缩能力的测定 | Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999 |
| DIN EN ISO 14129-1998 | 纤维增强塑料符合材料.用45角度拉伸试验方法测定平面内剪切应力/剪切应变响应关系，包括平面内剪切模数/强 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ? 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997 |
| DIN EN ISO 14130-1998 | 纤维增强塑料符合材料.用短梁法测定表面层间剪切强度 | Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997 |
| DIN EN ISO 14692-1-2005 | 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第1部分:词汇、符号、应用和材料 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials (ISO 14692-1:2002); English version EN ISO 14692-1:2002 |
| DIN EN ISO 14692-2 Berichtigung 1-2007 | 石油和天然气工业.玻璃纤维增强塑料.第2部分:生产资格 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002, Corrigenda to DIN EN ISO 14692-2:2005-07; English version EN ISO 14692-2:2002/AC:2006 |
| DIN EN ISO 14692-2-2005 | 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第2部分:合格鉴定和制造 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture (ISO 14692-2:2002); English version EN ISO 14692-2:2002 |
| DIN EN ISO 14692-3 Berichtigung 1-2007 | 石油和天然气工业.玻璃纤维增强塑料管.第3部分:系统管道 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002, Corrigenda to DIN EN ISO 14692-3:2005-07; English version EN ISO 14692-3:2002/AC:2006 |
| DIN EN ISO 14692-3-2005 | 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第3部分:系统设计 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2002); English version EN ISO 14692-3:2002 |
| DIN EN ISO 14692-4-2005 | 石油和天然气工业.玻璃纤维增强塑料(GRP)管.第4部分:制造、安装和操作 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO 14692-4:2002); English version EN ISO 14692-4:2002 |
| DIN EN ISO 15310-2005 | 纤维增强塑料复合材料.用板捻法测定内剪模量 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999); German version EN ISO 15310:2005 |
| DIN EN ISO 1598-1999 | 塑料.乙酸纤维素.不可溶解成份的测定(ISO 1598-1999) | Plastics - Cellulose acetate - Determination of insoluble particles (ISO 1598:1990); German version EN ISO 1598:1999 |
| DIN EN ISO 1599-2000 | 塑料.乙酸纤维素.模塑时粘度降低的测定 | Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999 |
| DIN EN ISO 1600-2000 | 塑料.乙酸纤维素.利用加热的不同周期在模制样品生产中的光吸收量的测定 | Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990); German version EN ISO 1600:1999 |
| DIN EN ISO 16000-7-2007 | 室内空气.第7部分:空气中石棉纤维浓度测定用取样策略 | Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007); German version EN ISO 16000-7:2007 |
| DIN EN ISO 16472-2006 | 动物饲料.精制淀粉酶中性清洁剂纤维(aNDF)含量的测定(ISO 16472:2006) | Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) (ISO 16472:2006) English version of DIN EN ISO 16472:2006-07 |
| DIN EN ISO 1968-2005 | 纤维绳索和绳索制品.词汇 | Fibre ropes and cordage - Vocabulary (ISO 1968:2004); Trilingual version EN ISO 1968:2004 |
| DIN EN ISO 1969-2005 | 纤维绳索.聚乙烯绳索.3和4股绳索 | Fibre ropes - Polyethylene - 3- and 4-strand ropes (ISO 1969:2004); German version EN ISO 1969:2004 |
| DIN EN ISO 2078-1994 | 纺织玻璃纤维.纱线.标识 (ISO 2078:1993); 德文版本 EN ISO 2078:1994 | Textile glass - Yarns - Designation (ISO 2078:1993); German version EN ISO 2078:1994 |
| DIN EN ISO 2307-2005 | 纤维绳索.特定物理和机械性能测定 | Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2005); German version EN ISO 2307:2005 |
| DIN EN ISO 2398-1997 | 压缩空气用纺织纤维增强橡胶软管.规范 | Rubber hose, textile-reinforced, for compressed air - Specification (ISO 2398:1995); German version EN ISO 2398:1997 |
| DIN EN ISO 3037-2007 | 波纹纤维板.边缘耐压碎性的测定(边缘不涂蜡法) | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) (ISO 3037:2007); German version EN ISO 3037:2007 |
| DIN EN ISO 5079-1996 | 纺织品.纤维.单纤维断裂强力和伸长率测定 | Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1979); German version EN ISO 5079:1995 |
| DIN EN ISO 527-4-1997 | 塑料.拉伸性能测定.第4部分:均质和非均质增强纤维塑料复合材料试验条件 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and anisotropic fibre-reinforced plastic composites (ISO 527-4:1997); German version EN ISO 527-4:1997 |
| DIN EN ISO 527-5-1997 | 塑料.抗拉性能的测定.第5部分:单向增强纤维塑料复合材料试验条件 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997); German version EN ISO 527-5:1997 |
| DIN EN ISO 585-2000 | 塑料.不增塑的乙酸纤维素.含水量的测定 | Plastics - Unplasticized cellulose acetate - Determination of moisture content (ISO 585:1990); German version EN ISO 585:1999 |
| DIN EN ISO 6865-2001 | 动物饲料.粗纤维含量的测定.中级过滤法 | Animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration (ISO 6865:2000); German version EN ISO 6865:2000 |
| DIN EN ISO 6888-2-2003 | 食品和动物饲料的微生物学.凝血酶阳性葡萄球菌(金黄色葡萄球菌及其他种)计数的水平方法.第2部分:兔血浆纤维 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium (ISO 6888-2:1999 + AMD 1:2003); German version EN ISO 6888-2:1999 + A1:2003 |
| DIN EN ISO 75-3-2004 | 塑料.载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 | Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004); German version EN ISO 75-3:2004 |
| DIN EN ISO 7822-2000 | 玻璃纤维增强塑料.孔隙率的测定.烧失量、机械粉碎和静态计数法 | Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999 |
| DIN EN ISO 9163-2005 | 纺织玻璃纤维.粗纱.试样的制备和浸渍粗纱拉伸强度的测定 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 |
| DIN EN ISO 9237-1995 | 纺织品.纤维织物透气性测定 | Textiles - Determination of permeability of fabrics to air (ISO 9237:1995); German version EN ISO 9237:1995 |
| DIN EN ISO 9554-2005 | 纤维绳索.一般规范 | Fibre ropes - General specifications (ISO 9554:2005); German version EN ISO 9554:2005 |
| DIN ISO 14446-2002 | 涂料和清漆的粘合剂.工业纤维素硝酸盐溶液粘度测定和此类溶液的分类 (ISO 14446:1999) | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999) |
| DIN ISO 15636-2004 | 硫化纤维磨料盘用背衬垫 | Back-up pads for vulcanized fibre discs (ISO 15636:2003) |
| DIN ISO 16057-2003 | 砂布.硫化纤维砂轮 | Coated abrasives - Vulcanized-fibre discs (ISO 16057:2002) |
| DIN ISO 1887-1984 | 纺织玻璃纤维.可燃物含量的测定 | Textile glass; determination of combustible matter content |
| DIN ISO 2076-2001 | 纺织品.人造纤维.属名 | Textiles - Man-made fibres - Generic names (identical with ISO 2076:1999) |
| DIN ISO 3039-1993 | 瓦楞纤维板.分离后组成原纸定量的测定 | Corrugated fibreboard; determination of the grammage of the component papers after separation; identical with ISO 3039:1975 |
| DIN ISO 3060-1994 | 棉纤维.平列纤维束断裂韧性的测定 | Cotton fibres; determination of breaking tenacity of flat bundles (ISO 3060:1974) |
| DIN ISO 3451-3-1991 | 塑料.灰分的测定.第3部分:未增塑的醋酸纤维素; 等同采用 ISO 3451-3:1984 | Plastics; determination of ash; unplasticized cellulose acetate; identical with ISO 3451-3:1984 |
| DIN ISO 7884-3-1998 | 玻璃.粘度和粘度固定点.第3部分:纤维伸长粘度计测定粘度 | Glass - Viscosity and viscometric fixed points - Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987) |
| DIN ISO 8115-2-1997 | 大包.第2部分:人造棉纤维包.尺寸 | Bales - Part 2: Bales of man-made staple fibres - Dimensions (ISO 8115-2:1994) |
| DIN V 1201-2004 | 排水和污水用未加筋的、钢纤维的和加筋的混凝土管和配件.1型和2型.要求、试验方法和合格评定 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Requirements, test methods and evaluation of conformity |
| DIN V 4034-1-2004 | 排水和污水用未加筋的、钢纤维和加筋的预制混凝土人孔.1型和2型.第1部分:要求、试验方法和合格评定 | Prefabricated concrete manholes, unreinforced, steel fibre and reinforced for drains and sewers - Type 1 and Type 2 - Part 1: Requirements, test methods and evaluation of conformity |
| DIN V 65352 Bb.1-1987 | 航空航天.纤维复合物的合格鉴定和验收试验结果的统计评价方法.计算实例 | Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites; example of calculation |
| DIN V 65352-1987 | 航空航天.纤维复合物的合格鉴定和验收试验结果的统计评价方法 | Aerospace; method of statistical evaluation of qualification and acceptance test results for fibre composites |
| DIN V 65380-1987 | 航空航天.纤维加筋塑料.单向叠层板材的试验.与纤维方向平行和横切的压缩试验 | Aerospace; fiber-reinforced plastics; testing of unidirectional laminates; compression test, parallel and transverse to fiber direction |
| DIN V 65579-1991 | 航空航天.碳纤维.化学分析.类金属元素的测定 | Aerospace; carbon fibres; chemical analysis; determination of the metalloid elements |
| DIN V ENV 1007-6-2002 | 高技术陶瓷.陶瓷成分.增强材料的试验方法.第6部分:高温测定纤维的抗拉性能; 德文版本 ENV 1007-6:2002 | Advanced technical ceramics - Ceramic composites; Methods of test for reinforcements - Part 6: Determination of tensile properties of filament at high temperature; German version ENV 1007-6:2002 |
| DIN V ENV 1094-7-1994 | 绝缘耐火制品.第7部分:陶瓷纤维制品的试验方法; 德文版本 ENV 1094-7:1993 | Insulating refractory products; part 7: methods of test for ceramic fibre products; German version ENV 1094-7:1993 |
| DIN V ENV 1170-8-1996 | 玻璃纤维混凝土试验方法.第8部分:气侯循环试验 | Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version prENV 1170-8:1996 |
| DIN VDE 0311-10-1988 | 电工用纤维素绝缘纸.定义和一般要求 | Cellulosic paper for electrical purposes; definitions and general requirements; identical with IEC 60554-1:1977 (status 1983) |
| DIN VDE 0311-31-1988 | 电工用纤维素绝缘纸.规范.普通电工纸 | Cellulosic paper for electrical purposes; specifications; general purpose electrical papers; identical with IEC 60554-3-1:1979 |
| DIN VDE 0311-32-1988 | 电工用纤维素绝缘纸.规范.电容器纸 | Cellulosic paper for electrical purposes; specifications; capacitor papers; identical with IEC 60554-3-2:1983 |
| DIN VDE 0311-33-1988 | 电工用纤维素纸.规范.绉纹纸 | Cellulosic paper for electrical purposes; specifications; cr?pe papers; identical with IEC 60554-3-3:1980 |
| DIN VDE 0311-34-1988 | 电工用纤维素绝缘纸规范.电解电容器纸 | Cellulosic paper for electrical purposes; specifications; electrolytic capacitor papers; identical with IEC 60554-3-4:1979 |
| DIN VDE 0311-35-1988 | 电工用纤维素绝缘纸.规范.专用纸 | Cellulosic paper for electrical purposes; specifications; special paper; IEC 60554-3-5:1984, modified |
| DIN VDE 0312-1959 | 层压材料试验规则.电气工程用硫化纤维材料 | Rules for testing methods for laminates; vulcanized fibres for electrical engineering |
| DIN VDE 0334-1-1972 | 电工用织物玻璃纤维制品规范.第1部分:织物玻璃纤维织品 | Regulations for textile glass products in electrical engineering; part 1: Textile glass fabrics |
| DIN VDE 0365-1-1967 | 电工用清漆纤维素材料规定.第1部分:漆纸 | Regulations for varnished fibrous materials for electrical engineering; part 1: Varnished papers |
| DIN VDE 0365-2-1967 | 电工用清漆纤维素材料规定.第2部分:漆布 | Regulations for varnished fibrous materials for electrical engineering; part 2: Varnished fabrics |
| DIN VDE 0365-3-1967 | 电工用清漆纤维素材料规定.第3部分:玻璃纤维漆布 | Regulations for varnished fibrous materials for electrical engineering; part 3: Varnished glass fabrics |
| DIN VDE 0441-2-1982 | 标称电压在1KV以上的系统用有机材料制成的绝缘子的试验.带玻璃纤维芯子的户外复合材料绝缘子的试验 | Tests on insulators of organic material for systems with nominal voltages greater than 1 kV; tests on outdoor composite insulators with fibre glass core VDE Guide |
| DIN VDE 0888-4-1999 | 通信系统光纤电缆.第4部分:室内用单纤维电缆 | Optical fibre cables for communication systems - Part 4: Indoor cables with one fibre |
| 编号 | 中文名称 | 英文名称 |