| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| BS 1133-21-1991 | 包装规程.第21节:再生纤维素薄膜,塑料薄膜,铝箔,挠性多层板和金属化材料 | Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials |
| BS 1524-1993 | 乙酸纤维素制模材料规范 | Specification for cellulose acetate moulding materials |
| BS 1596-1992 | 纤维板圆筒规范 | Specification for fibreboard drums |
| BS 1771-2-1990 | 制服和工作服用织物.第2部分:用纤维素纤维、人造纤维与混合物制造的织物规范 | Fabrics for uniforms and workwear - Specification for fabrics from cellulosic fibres, synthetic fibres and blends |
| BS 1902-6-1986 | 耐火材料的试验方法.第6部分:陶瓷纤维制品 | Methods of testing refractory materials - Ceramic fibre products |
| BS 1982-2-1990 | 有机材料制成或含有有机材料的板条制品的耐霉性.第2部分:抗纤维素分解微真菌性的测定方法 | Fungal resistance of panel products made of or containing materials of organic origin - Method for determination of resistance to cellulose-decomposing microfungi |
| BS 2043-1968 | 用投影显微镜测定毛纤维细度的方法 | Method for the determination of wool fibre fineness by the use of a projection microscope |
| BS 2610-1978 | 棉与某些含纤维素人造纤维的铜铵溶液流动性的测定试验方法 | Method of test for the determination of the cuprammonium fluidity of cotton and certain cellulosic man-made fibres |
| BS 2782-10 Method 1001-1977 | 塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1001:用巴科尔硬度计测量硬度 | Methods of testing plastics - Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor |
| BS 2782-10 Method 1002-1977 | 塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1002:灼烧重量损失测定 | Methods of testing plastics - Glass reinforced plastics - Determination of loss on ignition |
| BS 2782-10 Method 1003-1977 | 塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1003:拉伸性能测定 | Methods of testing plastics - Glass reinforced plastics - Determination of tensile properties |
| BS 2782-10 Method 1004-1977 | 塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1004:调节和试验用标准大气压 | Methods of testing plastics - Glass reinforced plastics - Standard atmospheres for conditioning and testing |
| BS 2782-10 Method 1005-1977 | 塑料的试验方法.第10部分:玻璃纤维增强塑料.试验方法1005:挠曲特性测定.三点法 | Methods of testing plastics - Glass reinforced plastics - Determination of flexural properties - Three point method |
| BS 2782-10 Method 1006-1978 | 塑料试验方法.第10部分:玻璃纤维增强塑料.试验方法1006:合成树脂浸渍玻璃纤维织物中挥发物和树脂含量测定 | Methods of testing plastics - Glass reinforced plastics - Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric |
| BS 2782-4 Method 470C-1991 | 塑料试验方法.第4部分:化学性能.试验方法470C:未增塑醋酸纤维素灰分测定 | Methods of testing plastics - Chemical properties - Determination of ash of unplasticized cellulose acetate |
| BS 2782-7 Method 721A-1988 | 塑料试验方法. 第7部分:流变性能.试验方法721A:树脂浸渍玻璃纤维测定树脂流失量 | Methods of testing plastics - Rheological properties - Determination of resin flow from resin impregnated glass fabric |
| BS 2880 Addendum No. 1-1959 | 醋酸纤维素片试验方法 | Methods of testing cellulose acetate flake |
| BS 2880-1991 | 醋酸纤维素片的试验方法 | Methods of testing cellulose acetate flake |
| BS 2F 142-1999 | 航空航天用抗水解的涂覆热塑性聚合物聚氨酯弹性物的尼龙纤维 | Hydrolysis resistant, thermoplastic polyether polyurethane elastomer coated nylon fabric for aerospace purposes |
| BS 2X 27-1991 | 航空航天用纤维素表面光饰方案规范 | Specification for cellulose finishing scheme for aerospace purposes |
| BS 3181-1-1987 | 气流法测定棉纤维性能.第1部分:单压气流法测定纤维细度值 | Methods for determination of cotton fibre properties by the airflow method - Determination of micronaire value by the single compression airflow method |
| BS 3183-1968 | 用气流法测定羊毛纤维直径的方法 | Method for the determination of wool fibre diameter by the airflow method |
| BS 3396-1-1991 | 塑料增强用的机织玻璃纤维织物.第1部分:坯布规范 | Woven glass fibre fabrics for plastics reinforcement - Specification for loom-state fabrics |
| BS 3396-2-1987 | 塑料增强用机织玻璃纤维织物.第2部分:退浆织物规范 | Woven glass fibre fabrics for plastics reinforcement - Specification for desized fabrics |
| BS 3396-3-1987 | 塑料增强用机织玻璃纤维织物.第3部分:聚酯树脂系统用成品布规范 | Woven glass fibre fabrics for plastics reinforcement - Specification for finished fabrics for use with polyester resin systems |
| BS 3749-1991 | 聚酯和环氧树脂装置增强用的E形玻璃纤维粗纱织物规范 | Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems |
| BS 3762-3.15-1985 | 配制洗涤剂分析.第3部分:定量试验方法.第15节:羧甲基纤维素含量估算方法 | Analysis of formulated detergents - Quantitative test methods - Method for estimation of carboxymethylcellulose content |
| BS 3953-1990 | 合成树脂粘结的机织玻璃纤维布层压板规范 | Specification for synthetic resin bonded woven glass fabric laminated sheet |
| BS 3958-3-1985 | 隔热材料.金属网面人造矿物纤维垫 | Thermal insulating materials - Metal mesh faced man-made mineral fibre mattresses |
| BS 3958-4-1982 | 隔热材料.第4部分:粘结预制人造矿物纤维管型材 | Thermal insulating materials - Bonded preformed man-made mineral fibre pipe sections |
| BS 3958-5-1986 | 隔热材料.第5部分:粘结人造矿物纤维板规范 | Thermal insulating materials - Specification for bonded man-made mineral fibre slabs |
| BS 3F 114-1995 | 每平方米重80克马德波勒姆细布纤维规范 | Specification for 80 g/m2 cotton madapolam fabric |
| BS 3F 116-1995 | 丝光棉纤维规范 | Specification for mercerized cotton fabric |
| BS 4029-1978 | 单纤维与长纤维拉伸弹性恢复测定试验方法(等速伸长试验机) | Method of test for the determination of tensile elastic recovery of single fibres and filaments (constant-rate-of-extension machines) |
| BS 4032-1978 | 纤维素纤维或合成纤维、纱线及织物或由这些纤维混纺的纱线及织物中水溶性或碱溶性添加剂测定的试验方法 | Method of test for the determination of certain water- or alkali-soluble additives in cellulosic or synthetic fibres, yarns and fabrics or yarns and fabrics made from blends of such fibres |
| BS 4044-1989 | 用梳片式纤维长度分析仪图解法测定纤维长度的方法 | Methods for determination of fibre length by comb sorter diagram |
| BS 4048 Pts.1 & 2-1966 | 复合金属丝绳索和纤维绳索规范.第1部分:复合绳索.第2部分:弹性绞索 | Specification for combined wire and fibre ropes. Combined ropes. Spring lay ropes |
| BS 4048 Pts.1 and 2-1966 | 复合钢丝绳和纤维绳规范.第1和2部分:复合绳.弹性拉绳 | Specification for combined wire and fibre ropes - Combined ropes - Spring lay ropes |
| BS 4154-1-1985 | 热固性聚酯树脂半透明玻璃纤维增强塑料波纹板.第1部分:材料和性能要求规范 | Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for material and performance requirements |
| BS 4154-2-1985 | 热固性聚酯树脂半透明玻璃纤维增强塑料波纹板.第2部分:外形和尺寸规范 | Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced) - Specification for profiles and dimensions |
| BS 4371-1991 | 纤维质密封垫规范 | Specification for fibrous gland packings |
| BS 4407-1988 | 纤维混纺织物的定量分析方法 | Methods for quantitative analysis of fibre mixtures |
| BS 4549-1-1997 | 增强塑料模塑件质量控制要求槽则.第1部分:玻璃纤维增强聚酯树脂模塑件质量控制方案制定指南 | Guide to quality control requirements for reinforced plastics mouldings - Guide to the preparation of a scheme to control the quality of glass reinforced polyester mouldings |
| BS 4817-1972 | 瓦楞纤维纸板厚度的测定方法 | Method for the determination of the thickness of corrugated fibreboard |
| BS 5116-1974 | 棉花平列纤维束断裂强度的测定试验方法 | Method of test for determination of breaking tenacity of flat bundles of cotton fibres |
| BS 5131-4.2-1990 | 鞋靴和鞋靴材料试验方法.第4部分:其它部件.第2节:纤维板弯曲指数 | Methods of test for footwear and footwear materials - Other components - Flexing index of fibreboard |
| BS 5131-4.5-1990 | 鞋靴和鞋靴材料试验方法.第4部分:其他部件.第5节:纤维纸板拉伸强度 | Methods of test for footwear and footwear materials - Other components - Tensile strength of fibreboard |
| BS 5167-1978 | 洗衣粉和清洁剂包装.纤维板盒及筒尺寸和容积 | Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibreboard |
| BS 5182-1975 | 采用纤维图形仪测定精纺装置加工的羊毛纤维长度的方法 | Method for the measurement of the length of wool fibres processed on the worsted system, using a fibre diagram machine |
| BS 525-1991 | 钢丝绳用纤维芯规范 | Specification for fibre cores for wire ropes |
| BS 5626-1-1979 | 电工用纤维素纸.第1部分:定义和一般要求 | Cellulosic papers for electrical purposes - Definitions and general requirements |
| BS 5626-3.1-1981 | 电工用纤维素纸.第3部分:各型材料规范.第1节:通用材料 | Cellulosic papers for electrical purposes - Specifications for individual materials - General purpose paper |
| BS 5626-3.2-1985 | 电工用纤维素纸.第3部分:各型材料规范.第2节:电容器纸 | Cellulosic papers for electrical purposes - Specification for individual materials - Capacitor paper |
| BS 5626-3.3-1982 | 电工用纤维素纸.第3部分:各型材料规范.第3节:皱纹纸 | Cellulosic papers for electrical purposes - Specification for individual materials - Crepe paper |
| BS 5626-3.4-1980 | 电工用纤维素纸.第3部分:各型材料规范.第4节:电解电容器纸 | Cellulosic papers for electrical purposes - Specifications for individual materials - Electrolytic capacitor paper |
| BS 5626-3.5-1995 | 电工用纤维素纸.第3部分:各型材料规范.第5节:专用纸 | Cellulosic papers for electrical purposes - Specification for individual materials - Special papers |
| BS 5689-3.2-1995 | 电工用浸漆织物.第3部分:各型材料规范.第2节:用环氧树脂、聚氨基甲酸乙酯、有机硅树脂、聚酯、沥青或油性树 | Varnished fabrics for electrical purposes - Specifications for individual materials - Glass fabric based varnished fabrics with epoxy, polyurethane, silicone, polyester, bituminous or oleoresinous varnish |
| BS 5699-1-1979 | 档案记录用已冲洗摄影胶片.第1部分:纤维素酯基底上的银明胶型规范 | Processed photographic film for archival records - Specifications for silver-gelatin type on cellulose ester base |
| BS 5734-5-1990 | 电工和其它用途用聚酯模塑料.第5部分:机械用玻璃纤维增强热固性塑料片材规范 | Polyester moulding compounds for electrical and other purposes - Specification for sheet moulding compounds for mechanical purposes |
| BS 5766-23-2001 | 动物饲料分析方法.粗纤维含量的测定.中间过滤法 | Methods for analysis of animal feeding stuffs - Determination of crude fibre content - Method with intermediate filtration |
| BS 5803-2-1985 | 坡屋顶空间隔热.第2部分:喷丸或喷粒人造矿物纤维隔热层规范 | Thermal insulation for use in pitched roof spaces in dwellings - Specification for man-made mineral fibre thermal insulation in pelleted or granular form for application by blowing |
| BS 5803-3-1985 | 坡屋顶空间隔热.第3部分:喷吹纤维素纤维隔热规范 | Thermal insulation for use in pitched roof spaces in dwellings - Specification for cellulose fibre thermal insulation for application by blowing |
| BS 5803-5-1985 | 坡屋顶空间隔热.第5部分:人造矿物纤维和纤维素纤维隔热层规范 | Thermal insulation for use in pitched roof spaces in dwellings - Specification for installation of man-made mineral fibre and cellulose fibre insulation |
| BS 5866-3-1991 | 公共部门用毯子.第3部分:多孔合成纤维毯规范 | Blankets suitable for use in the public sector - Specification for synthetic fibre cellular blankets |
| BS 5881-1980 | 单层实心纤维板重量测定方法 | Method for determination of grammage of single layers of solid fibreboard |
| BS 6049-9-1999 | 茶叶的试验方法.粗纤维含量的测定 | Methods of test for tea - Determination of crude fibre content |
| BS 6069-4.2-1991 | 空气质量的表征方法.第4部分:固定废物排放源.第2节:石棉厂排放废物中纤维支数含量测定方法 | Characterization of air quality - Stationary source emissions - Method for the determination of asbestos plant emissions by fibre count measurement |
| BS 6091-3.1-1995 | 电工用硫化纤维制品.第3部分:各型材料规范.第1节:扁片材 | Vulcanized fibre for electrical purposes - Specifications for individual materials - Flat sheets |
| BS 6189-1989 | 有关织物、纤维、纱线及工艺的术语词汇 | Glossary of terms relating to fabrics and associated fibres, yarns and processes |
| BS 6215-1-1981 | 农业食品试验方法.第1部分:粗纤维含量测定(通用方法) | Methods of test for agricultural food products - Determination of crude fibre content (general method) |
| BS 6215-2-1981 | 农业食品试验方法.第2部分:粗纤维含量测定(改进的沙勒法) | Methods of test for agricultural food products - Determination of crude fibre content (modified Scharrer method) |
| BS 6306-2-1982 | 稀释液纤维素粘度限值测定方法.第2部分:酒石酸钠铁(Ⅲ)络合物溶液法 | Methods for determination of limiting viscosity number of cellulose in dilute solutions - Iron (III) sodium tartrate complex (EWNNmod NaCl) method |
| BS 6451-1984 | 地面运输用网和纤维绳索负荷限制系统规范 | Specification for netting and fibre rope load restraint systems in surface transport |
| BS 6466-1984 | 陶瓷纤维炉衬的设计和安装实用规程 | Code of practice for design and installation of ceramic fibre furnace linings |
| BS 6564-3-1990 | 聚四氟乙烯(PTFE)材料和制品.第3部分:填充聚四氟乙烯的E类玻璃纤维规范 | Polytetrafluoroethylene (PTFE) materials and products - Specification for E glass fibre filled polytetrafluoroethylene |
| BS 6756-1986 | 纤维绳索货运网规范 | Specification for fibre rope cargo nets |
| BS 6782-11-1999 | 涂料用胶粘剂.工业用硝化纤维素溶液粘度的测定及此类溶液的分类 | Binders for paints - Determination of the viscosity of industrial cellulose nitrate solutions and their classification |
| BS 6F 37-1990 | 航空航天用570g/m*m和 640g/m*m棉粗帆布纤维规范 | Specification for 570 g/m2 and 640 g/m2 cotton canvas fabrics for aerospace purposes |
| BS 7034-3-1988 | 玻璃粘度和测定粘度固定点.第3部分:采用纤维拉伸粘度计对粘度的测定方法 | Viscosity and viscometric fixed points of glass - Method for the determination of viscosity by fibre elongation viscometer |
| BS 7159-1989 | 特殊工厂或工地用玻璃纤维增强塑料管道系统的设计和建造实用规程 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| BS 7200-1989 | 合成纤维刺绣毛毡规范 | Specification for synthetic-fibre needlefelts |
| BS 7225-3.1-1990 | 耐火材料分类.第3部分:陶瓷纤维制品.第1节:覆盖层、底板、毡垫和纸 | Classification of refractories - Ceramic fibre products - Blankets , mats, felts and paper |
| BS 7463-1-1991 | 纸、纸板和纸浆纤维配料分析.第1部分:一般方法 | Fibre furnish analysis of paper, board and pulps - General method |
| BS 7463-2-1991 | 纸、纸板和纸浆的纤维配料分析.第2部分:染色指南 | Fibre furnish analysis of paper, board and pulps - Guide to staining |
| BS 7463-3-1991 | 纸、纸板和纸浆的纤维配料分析.第3部分:采用赫芝伯格染色试验法 | Fibre furnish analysis of paper, board and pulps - Method of test by Herzberg stain |
| BS 7463-4-1991 | 纸、纸板和纸浆纤维配料分析.第4部分:用格拉弗'C'染色试验法 | Fibre furnish analysis of paper, board and pulps - Method of test by Graff 'C' stain |
| BS 7463-5-1991 | 纸、纸板和纸浆的纤维配料分析.第5部分:采用劳夫顿-麦瑞特染色(韦斯巴修订法)试验法 | Fibre furnish analysis of paper, board and pulps - Method of test by Lofton-Merritt stain (Wisbar modification) |
| BS 7463-6-1995 | 纸、纸板和纸浆纤维配料分析.纤维粗度的测定 | Fibre furnish analysis of paper, board and pulps - Determination of fibre coarseness |
| BS 7463-7-1995 | 纸、纸板和纸浆纤维配料分析.重量因数的测定 | Fibre furnish analysis of paper, board and pulps - Determination of weight factors |
| BS 7531-2006 | 工业和航空目的橡胶纤维垫片.规范 | Rubber bonded fibre jointing for industrial and aerospace purposes - Specification |
| BS 7658-2-1993 | 碳纤维.第2部分:线性密度的测定方法 | Carbon fibre - Method for determination of linear density |
| BS 7833-1995 | 有玻璃纤维柄套的消防釜规范 | Specification for firefighters' axes with glass fibre shafts |
| BS 8010-2.5-1989 | 管道的实用规程.第2部分:陆地管道:设计、制造和安装.第5节:玻璃纤维加强的热固性塑料制品 | Code of practice for pipelines - Pipelines on land: design, construction and installation - Glass reinforced thermosetting plastics |
| BS 8219-2001 | 薄板屋面和墙面涂敷层.成形纤维水泥.实施规程 | Installation of sheet roof and wall coverings - Profiled fibre cement - Code of practice |
| BS DD CEN/TS 14578-2003 | 给水或排水和下水道用塑料管道系统.基于不饱和聚酯树脂(UP)的玻璃纤维增强热固性塑料(GPR).安装的推荐实施 | Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GPR) based on unsaturated polyester resin (UP) - Recommended practice for installation |
| BS DD CEN/TS 14632-2006 | 排水、排污和供水、压力和非压力用塑料管道系统.基于聚酯树脂(UP)玻璃纤维增强热固性塑料(GPR).合格评定指 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Guidance for the assessment of conformity |
| BS DD CEN/TS 15658-2007 | 高级工业陶瓷.无反应环境高温条件下陶瓷纤维的机械特性.用热端法测定儒变性能 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method |
| BS DD ENV 1094-7-1994 | 隔热产品.陶瓷纤维产品的试验方法 | Insulating refractory products - Methods of test for ceramic fibre products |
| BS DD ENV 1170-8-1997 | 预浇铸混凝土制品.玻璃纤维加强水泥试验方法.循环气候性试验 | Precast concrete products - Test method for glass-fibre reinforced cement - Cyclic weathering type test |
| BS DD IEC/PAS 61280-2-10-2003 | 纤维光学通信子系统试验程序.数字系统.激光发射机的时间分辨线性调频脉冲和α因数测量 | Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| BS DD ISO/PAS 11856-2003 | 铺地织物.纤维粘合剂测定的试验方法 | Textile floor coverings - Test methods for the determination of fibre bind |
| BS EN 1007-1-2002 | 高技术陶瓷.陶瓷复合材料.纤维增强的试验方法.胶粘剂含量的测定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of size content |
| BS EN 1007-2-2002 | 高技术陶瓷.陶瓷复合材料.纤维增强的试验方法.线性密度的测定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of linear density |
| BS EN 1007-3-2003 | 高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.长纤维直径和横截面积的测定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of filament diameter and cross-section area |
| BS EN 1007-4-2005 | 高级工业陶瓷.陶瓷复合材料.纤维增强的试验方法.环境温度下长纤维的抗拉性能测定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of tensile properties of filaments at ambient temperature |
| BS EN 1007-5-2003 | 高级工业陶瓷.陶瓷复合材料.增强纤维的试验方法.室温下复丝束中长丝断开时的拉伸强度和拉伸应变分布的测定 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature |
| BS EN 1013-2-1999 | 单层屋面用透光成型塑料薄板.玻璃纤维增强的聚酯树脂薄板的试验方法和特殊要求 | Light transmitting profiled plastic sheeting for single skin roofing - Specific requirements and test methods for sheets of glass fibre reinforced polyester resin (GRP) |
| BS EN 1094-1-1997 | 隔热耐火产品.陶瓷纤维产品术语 | Insulating refractory products - Terminology for ceramic fibre products |
| BS EN 1094-3-2003 | 绝缘耐火产品.陶瓷纤维绝缘制品的分类 | Insulating refractory products - Classification of insulating products made from ceramic fibres |
| BS EN 1169-1999 | 预制混凝土制品.玻璃纤维增强水泥的工厂生产控制的一般规则 | Precast concrete products - General rules for factory production control of glass-fibre reinforced cement |
| BS EN 1170-1-1998 | 预制混凝土制品.玻璃纤维增强水泥的试验方法.基质坚实度的测量."坍塌"试验方法 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the consistency of the matrix - 'Slump test' method |
| BS EN 1170-2-1998 | 预制混凝土制品.玻璃纤维增强水泥试验方法.新鲜GRC纤维含量的测量.冲刷试验 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the fibre content in fresh GRC, 'Wash out test' |
| BS EN 1170-3-1998 | 预制混凝土制品.玻璃纤维增强水泥的测试方法.喷射的GRC纤维含量测定 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring the fibre content of sprayed GRC |
| BS EN 1170-4-1998 | 预制混凝土制品.玻璃纤维增强水泥的测试方法.测定抗弯强度.简易弯曲试验法 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength - 'Simplified bending test' method |
| BS EN 1170-5-1998 | 预制混凝土制品.玻璃纤维增强水泥的测试方法.测定抗弯强度.完全弯曲试验法 | Precast concrete products - Test method for glass-fibre reinforced cement - Measuring bending strength, "complete bending test" method |
| BS EN 1170-6-1998 | 预制混凝土制产品.玻璃纤维增强水泥的测试方法.浸渍时水吸收性的测定和干密度的测定 | Precast concrete products - Test method for glass-fibre reinforced cement - Determination of the absorption of water by immersion and determination of the dry density |
| BS EN 1170-7-1998 | 预制混凝土制品.玻璃纤维增强水泥的测试方法.由于湿度引起尺寸变化极限的测定 | Precast concrete products - Test method for glass-fibre reinforced cement - Measurement of extremes of dimensional variations due to moisture content |
| BS EN 12132-1-1999 | 羽毛和羽绒.纤维羽绒特性的试验方法.摩擦试验 | Feather and down - Methods of testing the down-proof properties of fabrics - Rubbing test |
| BS EN 12132-2-1999 | 羽毛和羽绒.纤维羽绒特性的试验方法.冲击试验 | Feather and down - Methods of testing the down-proof properties of fabrics - Impact test |
| BS EN 12195-2-2001 | 道路车辆的负载限动组件.安全性.人造纤维网绳 | Load restraint assemblies on road vehicles - Safety - Web lashing made from man-made fibres |
| BS EN 12256-1998 | 塑料管道系统.热塑配件.纤维配件机械强度和柔韧性试验方法 | Plastic piping systems - Thermoplastic fittings - Test method for mechanical strength or flexibility of fabricated fittings |
| BS EN 1228-1997 | 塑料管道系统.玻璃纤维的增强热固塑料(GFK).特定初始环状刚性测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
| BS EN 12467-2004 | 纤维水泥平板材.产品规范和试验方法 | Fibre-cement flat sheets - Product specification and test methods |
| BS EN 12575-1998 | 塑料.热固模塑复合物.SMC中纤维浸湿度测定 | Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC |
| BS EN 12576-1998 | 塑料.纤维增强复合物.SMC、BMC和DMC的压缩模制试验板的预先制备 | Plastics - Fibre reinforced composites - Preparation of compression moulded test plates of SMC, BMC and DMC |
| BS EN 12590-2000 | 纺织品.完全或部分用合成纤维制的工业缝纫线 | Textiles - Industrial sewing threads made wholly or partly form synthetic fibres |
| BS EN 1261-1995 | 一般用途的纤维绳索.大麻绳 | Fibre ropes for general service - Hemp |
| BS EN 12751-1999 | 纺织品.试验用纤维、纱和织物的取样 | Textiles - Sampling of fibres, yarns and fabrics for testing |
| BS EN 12763-2000 | 建筑物排放系统用纤维混凝土管和配件.交货的尺寸和技术条款 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
| BS EN 13002-2-1999 | 碳纤维长丝纱.试验方法和通用规范 | Carbon fibre yarns - Test methods and general specifications |
| BS EN 13003-1-1999 | 帕蜡-芳族聚酰胺纤维长丝纱.标示 | Para-aramid fibre filament yarns - Designation |
| BS EN 13003-2-1999 | 帕蜡-芳族聚酰胺纤维长丝纱.试验方法和通用规范 | Para-aramid fibre filament yarns - Methods of test and general specifications |
| BS EN 13003-3-1999 | 帕蜡-芳族聚酰胺纤维长丝纱.技术规范 | Para-aramid fibre filament yarns - Technical specifications |
| BS EN 13171-2001 | 建筑物的热绝缘产品.工厂制的木纤维产品.规范 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| BS EN 13280-2001 | 地上储存冷水用整体式结构和组合结构的玻璃纤维增强的蓄水池规范 | Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water |
| BS EN 13392-2001 | 纺织材料.单纤维丝.线密度测定 | Textiles - Monofilaments - Determination of linear density |
| BS EN 13413-2002 | 弹性地板覆盖物.填充纤维基布上的聚氯乙烯地板覆盖物.规范 | Resilient floor coverings - Polyvinyl chloride floor coverings on a filled fibrous backing - Specification |
| BS EN 13421-2006 | 塑料.热模化合物.复合和增强纤维.压模化合物的向异性能测定用试样制备 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| BS EN 13496-2002 | 建筑设施用隔热制品.玻璃纤维网状物的机械性能的测定 | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes |
| BS EN 13815-2006 | 纤维石膏模型.定义.要求和试验方法 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| BS EN 1394-1997 | 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管.外表初始圆周抗拉强度的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
| BS EN 14053-2004 | 包装.瓦楞或实心纤维纸板制成的包装件.类型和结构 | Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction |
| BS EN 14118-1-2003 | 加强材料.纺织玻璃纤维垫(短切原丝和连续的长丝垫)规范.名称 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Designation |
| BS EN 14118-2-2003 | 加强材料.纺织玻璃纤维垫(短切原丝和连续的长丝垫)规范.试验方法和一般要求 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Methods of test and general requirements |
| BS EN 14118-3-2003 | 加强材料.纺织玻璃纤维垫(短切原丝和连续的长丝垫).特殊要求 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Specific requirements |
| BS EN 14278-1-2005 | 纺织材料.棉纤维粘着性的测定.使用手工热检测设备的方法 | Textiles - Determination of cotton fibre stickiness - Method using a manual theromodetection device |
| BS EN 14278-2-2004 | 纺织品.棉纤维粘性的测定.使用自动测温板式装置的方法 | Textiles - Determination of cotton fibre stickiness - Method using an automatic thermodetection plate device |
| BS EN 14278-3-2004 | 纺织品.棉纤维粘性的测定.使用自动测温旋转筒式装置的方法 | Textiles - Determination of cotton fibres stickiness - Method using an automatic thermodetection rotating drum device |
| BS EN 14362-2-2003 | 纺织物.从偶氮染料中分离出的某些芳族胺的测定方法.通过萃取纤维获得某些偶氮染料的使用的检测 | Textiles - Methods for the determination of certain aromatic amines deriv ed from azo colorants - Detection of the use of certain azo colorants accessible by extracting t he fibres |
| BS EN 14364-2006 | 地下压力排水和排污水塑料管道系统.未饱和聚酯树脂(UP)玻璃纤维增强的热固性塑料(GRP).管道、配件和连接件 | Plastic piping systems for drainage and sewerage with or without pressure - Glass reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN 1444-2001 | 纤维水泥管道.管道敷设和现场施工指南 | Fibre-cement pipelines - Guide for laying and on-site work practices |
| BS EN 14447-2005 | 纤维增强塑料.玻璃垫增强热塑性塑料(GMT).测定流动性和固化性 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification |
| BS EN 14488-3-2006 | 测试喷射的混凝土.纤维钢筋梁样品的挠曲强度(首峰、终峰和残余量) | Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
| BS EN 14488-5-2006 | 测试喷射混凝土.纤维增强混凝土板样本的能量吸收能力的测定 | Testing sprayed concrete - Determination of energy absorption capacity of fibre reinforced slab specimens |
| BS EN 14488-7-2006 | 测试喷射混凝土纤维增强混凝土的纤维含量 | Testing sprayed concrete - Fibre content of fibre reinforced concrete |
| BS EN 14525-2005 | 不同材料管道用球墨铸铁大公差联接器和法兰接头:球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| BS EN 14649-2005 | 预浇铸混凝土产品.水泥和混凝土中玻璃纤维残留强力的试验方法(SIC试验) | Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC test) |
| BS EN 14650-2005 | 预浇铸混凝土产品.金属纤维混凝土工厂生产控制的一般规则 | Precast concrete products - General rules for factory production control of metallic fibered concrete |
| BS EN 14651-2005 | 金属纤维混凝土试验方法.测量柔性抗拉强度(残余比例极限(LOP)) | Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) |
| BS EN 14684-2004 | 聚酯纤维绳索.双股编织结构 | Polyester fibre ropes - Double braid construction |
| BS EN 14685-2004 | 聚酰胺纤维绳索.双股编织结构 | Polyamide fibre ropes - Double braid construction |
| BS EN 14686-2004 | 聚酯/聚烯烃双股纤维绳索 | Fibre ropes of polyester/polyolefin dual fibres |
| BS EN 14687-2004 | 混合聚烯烃纤维绳索 | Mixed polyolefin fibre ropes |
| BS EN 14721-2005 | 金属纤维混凝土的试验方法.新浇混凝土和硬化混凝土中纤维含量的测量 | Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete |
| BS EN 14768-2005 | 纤维板桶.公称容量为5l到600l带滑动盖的可移动顶端(敞口)桶 | Fibreboard drums — Removable head (open head) drums with slip on lids with a nominal capacity of 5l to 600l |
| BS EN 14845-1-2007 | 混凝土纤维试验方法.参比混凝土 | Test methods for fibres in concrete - Reference concretes |
| BS EN 14845-2-2006 | 混凝土纤维的试验方法.混凝效果 | Test methods for fibres in concrete - Effect on concrete |
| BS EN 14889-1-2006 | 混凝土纤维.钢纤维.定义、规范和合格性 | Fibres for concrete - Steel fibres - Definitions, specifications and conformity |
| BS EN 14889-2-2006 | 混凝土纤维.纤维聚合物.定义、规范和合格性 | Fibres for concrete - Polymer fibres - Definitions, specifications and conformity |
| BS EN 1492-1-2000 | 纺织吊索.安全性.一般用途的人造纤维的单层机织织带吊索 | Textile slings - Safety - Flat woven webbing slings, made of man-made fibres, for general purpose use |
| BS EN 1492-2-2000 | 纺织吊索.安全性.一般用途的人造纤维的圆吊索 | Textile slings - Safety - Roundslings, made of man-made fibres, for general purpose use |
| BS EN 1492-4-2004 | 纤维吊索.安全.天然和人造纤维制通用提升吊索 | Textile slings - Safety - Lifting slings for general service made from natural and man-made fibre ropes |
| BS EN 15319-2007 | 纤维(石膏)抹灰层设计的一般原则 | General principles of design of fibrous (gypsum) plaster works |
| BS EN 1787-2000 | 食物.ESR光谱法检测经过辐射的含纤维素食品 | Foodstuffs - Detection of irradiated food containing cellulose by ESR spectroscopy |
| BS EN 181000-1995 | 电子元器件用质量评定协调系统.通用规范.纤维光学分流装置 | Harmonized system of quality assessment for electronic components - Generic specification - Fibre optic branching devices |
| BS EN 1891-1998 | 防高处坠落个人保护设备.低弹力纤维绳索 | Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes |
| BS EN 23035-1994 | 单面和单壁瓦楞纤维纸板耐压力的测定定 | Single-faced and single-wall corrugated fibreboard - Determination of flat crush resistance |
| BS EN 2329-1993 | 纺织玻璃纤维预浸渍.测定单位面积质量的试验方法 | Textile glass fibre preimpregnates - Test method for the determination of mass per unit area |
| BS EN 2330-1993 | 纺织玻璃纤维预浸渍. 测定挥发物含量的试验方法 | Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter |
| BS EN 2331-1993 | 纺织玻璃纤维预浸渍.测定单位面积树脂、纤维含量和纤维质量的试验方法 | Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area |
| BS EN 2332-1993 | 纺织玻璃纤维预浸渍.测定树脂流动的试验方法 | Textile glass fibre preimpregnates - Test method for the determination of the resin flow |
| BS EN 2374-1991 | 玻璃纤维加强的模压件和夹层复合材料.试验板的生产 | Specification for glass fibre reinforcing mouldings and sandwich composites - Production of test panels |
| BS EN 2377-1989 | 玻璃纤维增强的塑料规范.试验方法.表面层间剪切强度测定 | Specification for glass fibre reinforced plastics - Test method - Determination of apparent interlaminar shear strength |
| BS EN 2378-1995 | 纤维增强的塑料.用浸泡法测定塑料吸水性 | Fibre reinforced plastics - Determination of water absorption by immersion |
| BS EN 2489-1995 | 纤维增强塑料.试验液体效应的测定 | Fibre reinforced plastics - Determination of the action of test fluids |
| BS EN 2557-1997 | 碳素纤维预浸织物.单位面积质量测定 | Carbon fibre preimpregnates - Determination of mass per unit area |
| BS EN 2558-1997 | 碳纤维预浸渍材料.挥发物含量测定 | Carbon fibre preimpregnates - Determination of the volatile content |
| BS EN 2559-1997 | 碳素纤维预浸织物.树脂成份,纤维成份以及单位面积纤维质量测定 | Carbon fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area |
| BS EN 2560-1998 | 炭纤维预浸渍物.树脂流量的测定 | Carbon fibre preimpregnates - Determination of the resin flow |
| BS EN 2561-1995 | 碳素纤维增强的塑料.无向的塑料层压制品.平行与纤维方向的抗拉试验 | Carbon fibre reinforced plastics - Undirectional laminates - Tensile test parallel to the fibre direction |
| BS EN 2562-1997 | 碳素纤维增强塑料.单向层压塑料.与纤维方向平行的弯曲试验 | Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction |
| BS EN 2563-1997 | 碳纤维增强塑料.单向层压板.层间表面剪切强度的测定 | Carbon fibre reinforced plastics - Unidirectional laminates - Determination of the apparent interlaminar shear strength |
| BS EN 2564-1998 | 碳纤维层压板材.纤维、树脂含量和空隙率的测定 | Carbon fibre laminates - Determination of the fibre, resin and void contents |
| BS EN 2597-1998 | 碳纤维层压板材.单向层压板材.垂直于纤维方向的拉伸试验 | Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction |
| BS EN 2743-2002 | 航空航天系列.纤维增强的塑料.未老化材料测试前状态调节的标准程序 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
| BS EN 2746-1998 | 玻璃纤维增强塑料.弯曲试验.三点弯曲法 | Glass fibre reinforced plastics - Flexural test - Three point bend method |
| BS EN 2747-1998 | 玻璃纤维增强塑料.拉伸试验 | Glass fibre reinforced plastics - Tensile test |
| BS EN 300-2006 | 定向纤维束板(OSB).定义、分类和规范 | Oriented strand boards (OSB) - Definitions, classification and specifications |
| BS EN 302-3-2004 | 承重木结构用胶粘剂.试验方法.通过温度和湿度循环试验测定木纤维酸性腐蚀对横向拉伸强度的影响 | Adhesives for load-bearing timber structures - Test methods - Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
| BS EN 316-1999 | 木纤维板.定义、分类和符号 | Wood fibreboards - Definition, classification and symbols |
| BS EN 317-1993 | 碎料板和纤维板.在水中浸泡后膨胀厚度的测定 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| BS EN 319-1993 | 碎料板和纤维板.与板平面垂直的拉伸强度的测定 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| BS EN 320-1993 | 纤维板.抗螺钉轴向拔出力的测定 | Fibreboards - Determination of resistance to axial withdrawal of screws |
| BS EN 3665-1997 | 清漆和涂料检验方法.铝合金耐纤维状腐蚀检验 | Test methods for paints and varnishes - Filiform corrosion resistance test on aluminium alloys |
| BS EN 3733-008-2006 | 航空航天系列.连续工作温度150°C自锁紧环连接的单路圆形光连接器.EN4532(200mu/280mu纤维)的电缆用插头组 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Plug sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard |
| BS EN 3733-009-2006 | 航空航天系列.连续工作温度150°C自锁紧环连接的单路圆形光连接器.EN4532(200mu/280mu纤维)的电缆用插孔组 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Receptacle sub-assembly for cable to EN 4532 (200 ?m/280 ?m fibre) - Product standard |
| BS EN 3745-202-2005 | 航空航天系列.飞行器用光纤和光缆.试验方法.纤维尺寸 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
| BS EN 382-1-1993 | 纤维板.表面吸湿性测定.纤维板.干燥处理纤维板试验方法 | Fibreboards - Determination of surface absorption - Fireboards - Determination of surface absorption - Test method for dry process fibreboards |
| BS EN 382-2-1994 | 纤维板.表面吸湿性的测定.防火板.硬质板的试验方法 | Fibreboards - Determination of surface absorption - Fireboards - Determination of surface absorption - Test methods for hardboards |
| BS EN 40-7-2003 | 灯柱.纤维增强聚酯复合灯柱的要求 | Lighting columns - Requirements for fibre reinforced polymer composite lighting columns |
| BS EN 4533-001-2006 | 航空航天系列.纤维光学系统.手册.终端法和工具 | Aerospace series - Fibre optic systems - Handbook - Termination methods and tools |
| BS EN 4533-002-2006 | 航空航天系列.纤维光学系统.手册.试验和测量 | Aerospace series - Fibre optic systems - Handbook - Test and measurement |
| BS EN 4533-003-2006 | 航空航天系列.纤维光学系统.手册.航行灯和设备的使用 | Aerospace series - Fibre optic systems - Handbook - Looming and installation practices |
| BS EN 4533-004-2006 | 航空航天系列.纤维光学系统.手册.修理、维护和检测 | Aerospace series - Fibre optic systems - Handbook - Repair, maintenance and inspection |
| BS EN 492-2004 | 纤维水泥条板及配件.产品规范和试验方法 | Fibre cement slates and fittings - Product specification and test methods |
| BS EN 494-2004 | 纤维水泥型板及配件.产品规范和试验方法 | Fibre-cement profiled sheets and fittings - Product specification and test methods |
| BS EN 50223-2001 | 可燃短纤维材料的自动静电应用设备 | Automatic electrostatic application equipment for flammable flock material |
| BS EN 50337-8-3-2007 | 纤维光学通信系统使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的LSH-PC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category C |
| BS EN 50353-2001 | 绝缘油.用显微镜计数法测定纤维污染物 | Insulating oil - Determination of fibre contamination by the counting method using a microscope |
| BS EN 50377-10-2-2005 | 光纤通信系统中使用的连接器装置和互连组件.产品规范.第10-2部分:端接在IEC 60793-2 B1类光纤上的MU/APC型 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 10-2: MU/APC singlemode terminated on IEC 60793-2 category B1 fibre |
| BS EN 50377-2-1-2001 | 光纤通信系统使用的接头组件和互连元件.产品规范.接线端设在IEC 60793-2类B1单模纤维上的FC-PC型 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre |
| BS EN 50377-3-1-2001 | 光纤通信系统中使用接头组件和互连元件.产品规范.接线端设在IEC 60793-2类A1a和A1b多模纤维上的SG型 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type SG terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 50377-5-1-2003 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2类B.1.1单模纤维上的EC型连接器组和互 | Connectors sets and interconnect components to be used in optical fibre communication systems - Product specifications - Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type EC terminated on IEC 60793-2 category B.1.1 singlemode fibre |
| BS EN 50377-6-2-2007 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的SC-RJ单 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - SC-RJ single mode terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, category U |
| BS EN 50377-7-1-2004 | 光纤通信系统中使用的连接器装置和互连组件.产品规范.端接在IEC 60793-2 A1a和A1b类多模纤维上的LC-PC双工 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LC-PC duplex terminated on IEC 60793-2 category A1a and A1b multimode fibre |
| BS EN 50377-7-2-2004 | 光纤通信系统中使用的连接器装置和互连组件.产品规范.端接在IEC 60793-2 B1.1类单模纤维上的LC-PC双工型 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LC-PC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-7-3-2004 | 光纤通信系统中使用的连接器装置和互连组件.产品规范.端接在IEC 60793-2 B1.1类单模纤维上的LC-APC双工型 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LC-APC duplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-7-4-2004 | 光纤通信系统中使用的连接器装置和互连组件.产品规范.端接在IEC 60793-2 B1.1类单模纤维上的LC-PC单工型 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LC-PC simplex terminated on IEC 60793-2 category B1.1 singlemode fibre |
| BS EN 50377-8-2-2007 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的LSH-APC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C |
| BS EN 50377-8-4-2007 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的LSH-APC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category U |
| BS EN 50377-8-5-2007 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50类B1.1和B1.3单模纤维上的LSH-PC单 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , composite ferrule category U |
| BS EN 50377-8-6-2007 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50 B1.1和B1.3类单模纤维上的LSH-HR | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-HR simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , with full zirconia ferrule category C |
| BS EN 50377-8-7-2007 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50 B1.1和B1.3类单模纤维上的LSH-PC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , with full zirconia ferrule category C |
| BS EN 50377-8-8-2007 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50 B1.1和B1.3类单模纤维上的LSH-APC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , with full zirconia ferrule category U |
| BS EN 50377-8-9-2007 | 光纤通信系统中使用的连接器组和互连元件.产品规范.端接在IEC 60793-2-50 B1.1和B1.3类单模纤维上的LSH-PC | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - LSH-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre , with full zirconia ferrule category U |
| BS EN 50378-3-1-2007 | 光纤通信系统用无源元件.产品规范.端接在IEC60793-2-50类B1.1和B1.3单模纤维上的类型100/200GHz DWDM模数 | Passive components to be used in optical fibre communication systems - Product specifications - Type 100/200 GHz DWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre |
| BS EN 50378-3-2-2007 | 光纤通信系统用无源元件.产品规范.端接在IEC60793-2-50类B1.1和B1.3单模纤维上的类型4/8信道CWDM模数 | Passive components to be used in optical fibre communication systems - Product specifications - Type 4/8 channel CWDM module terminated on IEC 60793-2-50 category B1.1 and B1.3 single mode fibre |
| BS EN 50411-2-2-2007 | 用于光纤传递系统的纤维形成体和闭路.产品规范.S&A类密封平盖纤维接缝闭路类型1 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Sealed pan fibre splice closures Type 1, for category S & A |
| BS EN 50411-2-4-2006 | 用于光纤通信系统的纤维形成体和闭路.产品规范.S&A类1型密封圆盖纤维接缝闭路 | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Sealed dome fibre splice closures type 1, for category S & A |
| BS EN 50414-2006 | 聚氯乙烯绝缘和护套光电纤维电缆铅分析的试验方法.方法A:用火焰激发原子吸收光谱测定法测定法含铅总量测定. | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A: Total lead content determination with flame excitation atomic absorption spectrometry - Method B: Qualitative analysis of lead by lead sulphide staining |
| BS EN 512-1995 | 纤维水泥制品.压力管道和接头 | Fibre-cement products - Pressure pipes and joints |
| BS EN 588-1-1997 | 下水管和排水道用纤维水泥管.第1部分:重力管路系统用管道、管连接件和管配件 | Fibre-cement pipes for sewers and drains - Pipes, joints and fittings for gravity systems |
| BS EN 588-2-2002 | 下水管和排水道用纤维水泥管.人孔和检验井 | Fibre-cement pipes for sewers and drains - Manholes and inspection chambers |
| BS EN 60249-2-1992 | 规范.第19号规范:多层印制电路板构件规定的可燃性双马来酰亚胺/三嗪改型氧化物玻璃纤维编织包铜叠层板材 | Specifications. Specification No. 19. Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| BS EN 60317-0-4-1998 | 特种绕组线规范.一般要求.树脂或清漆浸渍玻璃纤维绕制、裸或漆包矩形铜线 | Specification for particular types of winding wires - General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 60317-0-5-2007 | 绕组线的特殊类型用规范.一般要求.玻璃纤维编制树脂或浸渍清漆的裸露或涂瓷釉的矩形铜线 | Specifications for particular types of winding wires - General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
| BS EN 60317-31-1993 | 特种绕线规范.温度指数为180的玻璃纤维绕制聚酯或聚酰胺酯清漆处理过的裸线或漆包矩形铜线 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish resin impregnated, bare or enamelled rectangular copper wire, temperature index 180 |
| BS EN 60317-32-1993 | 特种绕线规范.温度指数为155的玻璃纤维绕制聚酯或聚酰胺酯清漆处理过的裸线或漆包矩形铜线 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 |
| BS EN 60317-33-1993 | 特种绕线规范.温度指数为200的玻璃纤维绕制的经硅氧烷清漆处理的裸线或漆包矩形铜线 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 |
| BS EN 60317-39-1993 | 特殊型绕组线规范.玻璃纤维编织聚酯或聚酰胺酯处理,裸或漆包方铜线,温度系数180 | Specifications for particular types of winding wire - Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 |
| BS EN 60317-40-1993 | 特殊型绕组线规范.玻璃纤维编织硅清漆处理,裸或漆包方铜线,温度系数200 | Specifications for particular types of winding wires - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 |
| BS EN 60317-48-2000 | 特种绕组线规范.玻璃纤维缠绕树脂或清漆浸渍的裸露或漆包圆铜线,温度指数为155 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 |
| BS EN 60317-49-2000 | 特种绕组线规范.玻璃纤维缠绕树脂或清漆浸渍的裸露或漆包圆铜线,温度指数为180 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 |
| BS EN 60317-50-2000 | 特种绕组线规范.玻璃纤维缠绕树脂或清漆浸渍的裸露或漆包圆铜线,温度指数为200 | Specifications for particular types of winding wires - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 |
| BS EN 60371-3-6-1996 | 云母基绝缘材料规范.第3部分:单项材料规范.第6节:用B级环氧树脂粘合剂粘结的玻璃纤维织物衬底云母纸 | Specification for insulating materials based on mica - Specifications for individual materials - Gloss-backed mica paper with a B-stage epoxy resin binder |
| BS EN 60450-2004 | 新旧纤维素电绝缘材料聚合的平均粘度测量 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| BS EN 60454-3-10-1996 | 电工用压敏胶带规范.单项材料规范.带有橡胶热固性胶的乙酸丁酸纤维素薄膜胶带 | Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive |
| BS EN 60454-3-11-2007 | 电工用压敏粘带.单项材料规范.涂有玻璃长丝、纤维素皱纹纸、聚酯非织布、环氧树脂和压敏粘合剂的聚酯薄膜化 | Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesives |
| BS EN 60454-3-4-2007 | 电工用压敏粘带.单项材料规范.带橡胶热固性粘合剂的纤维素皱纹纸和非皱纹纸 | Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Cellulose paper, creped and non-creped, with rubber thermosetting adhesive |
| BS EN 60454-3-8-2006 | 电工用压敏粘带.单项材料规范.涂有玻璃纤维、乙酸纤维素或与粘胶纤维组合的带压敏粘胶的编织纤维带 | Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre |
| BS EN 60554-2-2002 | 电工用纤维素纸.试验方法 | Cellulosic papers for electrical purposes - Methods of test |
| BS EN 60684-3-300-2002 | 绝缘软套管.各种型号软套管规范要求.无涂层的玻璃纤维编织软套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile fibre sleeving, braided, uncoated |
| BS EN 60684-3-400 to 402-2002 | 绝缘软套管规范.各种型号软套管规范要求.涂有硅橡胶的玻璃纤维编织套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile sleeving with silicone elastomer coating |
| BS EN 60684-3-406 to 408-2003 | 绝缘软套管规范.各种型号软套管的规范要求.PVC涂覆层的玻璃纤维编织套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile sleeving with PVC coating |
| BS EN 60684-3-409-1999 | 绝缘软套管规范.各种型号套管的规范要求.带聚氨酯(PUR)覆层的玻璃纤维编织套管 | Specification for flexible insulating sleeving - Specification requirements for individual types of sleeving - Glass textile sleeving with polyurethane (PUR)-based coating - Glass textile sleeving with polyurethane (PUR)-base coating |
| BS EN 60793-1-20-2002 | 光纤.测量方法和试验规程.纤维几何结构 | Optical fibres - Measurement methods and test procedures - Fibre geometry - Section 20: Fibre geometry measurement methods |
| BS EN 60793-1-30-2002 | 光纤.测量方法和试验规程.纤维验证试验 | Optical fibres - Measurement methods and test procedures - Fibre proof test |
| BS EN 60793-1-34-2006 | 光学纤维.测量方法和试验规程.纤维卷曲 | Optical fibres - Measurement methods and test procedures - Fibre curl |
| BS EN 60793-1-41-2004 | 光学纤维.测量方法和试验规程.频带宽度 | Optical fibres - Measurement methods and test procedures - Bandwidth |
| BS EN 60793-1-43-2002 | 光学纤维.测量方法和试验规程.数字孔径 | Optical fibres - Measurement methods and test procedures - Numerical aperture |
| BS EN 60793-1-46-2002 | 光学纤维.测量方法和试验规程.光透射率变化的监测 | Optical fibres - Measurement methods and test procedures - Monitoring of changes in optical transmittance |
| BS EN 60793-1-49-2006 | 光学纤维.测量方法和试验规程.差分模式时延 | Optical fibres - Measurement methods and test procedures - Differential mode delay |
| BS EN 60793-1-50-2002 | 光学纤维.测量方法和试验规程.湿热(稳态) | Optical fibres - Measurement methods and test procedures - Damp heat (steady state) |
| BS EN 60793-1-51-2002 | 光学纤维.测量方法和试验规程.干热 | Optical fibres - Measurement methods and test procedures - Dry heat |
| BS EN 60793-1-52-2002 | 光学纤维.测量方法和试验规程.温度变化 | Optical fibres - Measurement methods and test procedures - Change of temperature |
| BS EN 60793-1-53-2002 | 光学纤维.测量方法和试验程序.浸水 | Optical fibres - Measurement methods and test procedures - Water immersion |
| BS EN 60793-1-54-2003 | 光学纤维.测量方法和试验规程.γ辐射 | Optical fibres - Measurement methods and test procedures - Gamma irradiation |
| BS EN 60793-2-20-2002 | 光学纤维.产品规范.A2类多模光纤的分规范 | Optical fibres - Product specifications - Sectional specification for category A2 multimode fibres |
| BS EN 60793-2-40-2006 | 光学纤维.产品规范.A4类多模光纤的分规范 | Optical fibres - Product specifications - Sectional specification for category A4 multimode fibres |
| BS EN 60793-2-50-2004 | 光纤.产品规范.B级单模纤维的分规范 | Optical fibres - Products specification - Sectional specification for class B single-mode fibres |
| BS EN 60794-1-2-2003 | 光学纤维电缆.总规范.基础光缆试验规程 | Optical fibre cables - Generic specification - Basic optical cable test procedures |
| BS EN 60794-2-21-2006 | 光缆.室内光缆.房屋布线用多纤维光学配电电缆的详细规范 | Optical fibre cables - Indoor cables - Detailed specification for multi-fibre optical distribution Cables for use in premises cabling |
| BS EN 60819-1-1996 | 电气用非纤维素纸.定义和一般要求 | Non-cellulosic papers for electrical purposes - Definitions and general requirements |
| BS EN 60819-2-2002 | 电工用非纤维素纸.试验方法 | Non-cellulosic papers for electrical purposes - Methods of test |
| BS EN 60819-3-1-2001 | 电工用非纤维素纸.专用材料规范.填充玻璃纸 | Non-cellulosic papers for electrical purposes - Specifications for individual materials - Filled glass paper |
| BS EN 60819-3-2-2002 | 电工用非纤维素纸.各种材料规范.混合无机-有机纸 | Non-cellulosic papers for electrical purposes - Specifications for individual materials - Hybrid inorganic-organic paper - Hybrid inorganic-organic paper |
| BS EN 60819-3-3-2006 | 电工用非纤维素纸.单项材料规范.非填充芳族聚酰胺纸 | Non-cellulosic papers for electrical purposes - Specifications for individual materials - Unfilled aramid (aromatic polyamide) papers |
| BS EN 60819-3-4-2002 | 电工用非纤维素纸.各种材料规范.含不超过50%的云母颗粒的芳族聚酰胺纤维纸 | Non-cellulosic papers for electrical purposes - Specifications for individual materials - Aramid fibre paper containing not more than 50 % of mica particles - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles |
| BS EN 60874-17-1997 | 光纤和电缆的连接器.纤维光学连接器的部分规范.F-05型(磨擦锁定) | Connectors for optical fibres and cables - Sectional specification for fibre optic connector - Type F-05 (friction lock) |
| BS EN 61067-1-1997 | 玻璃和玻璃聚酯纤维机织带.第1部分:定义、分类和一般要求 | Glass and glass polyester fibre woven tapes - Definitions, classification and general requirements |
| BS EN 61067-2-1997 | 玻璃和玻璃聚酯纤维机织带.第2部分:试验方法 | Glass and glass polyester fibre woven tapes - Methods of test |
| BS EN 61067-3-1-1995 | 玻璃和玻璃聚酯纤维机织带.第3部分:各型材料规范.第1节:1,2,3型织带 | Glass and glass polyester fibre woven tapes - Specifications for individual materials - Type 1, 2 and 3 tapes |
| BS EN 61068-1-1997 | 聚酯纤维机织带.第1部分:定义、牌号和一般要求 | Polyester fibre woven tapes - Definitions, designation and general requirements |
| BS EN 61068-2-1997 | 聚酯纤维机织带.第2部分:试验方法 | Polyester fibre woven tapes - Methods of test |
| BS EN 61068-3-1-1996 | 聚酯纤维机织带.第3部分:各型材料规范.第1节:常规或无梭织机编织带 | Polyester fibre woven tapes - Specification for individual materials - Tapes woven on conventional or shuttleless looms |
| BS EN 61197-1996 | 绝缘油.火焰线性传播.玻璃纤维试验法 | Insulating liquids - Linear flame propagation - Test method using a glass-fibre tape |
| BS EN 61249-2-1-2005 | 印制板和其它互连结构用材料.包被和非包被增强基材.酚醛纤维素纸增强铜包被经济级叠层板 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper-clad |
| BS EN 61249-2-10-2003 | 印刷板和互连结构用材料.包被和非包被增强基材.规定了易燃性的包铜改良或未改良的氰酸酯溴化环氧编织E型玻 | Materials for printed boards and other interconnecting structures - Reinforced base materials clad and unclad - Cyanate ester , brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-11-2004 | 印制板和其他互联结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的聚酰亚胺溴化环氧改良或非 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-18-2002 | 互联结构用材料.包被和非包被的增强基材分规范集.阻燃型(垂直燃烧试验)铜包被聚酯非编织玻璃纤维增强的层压 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper clad - Section 18: Polyester non-woven fiberglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-19-2002 | 互连结构用材料.包层和非包层的增强的基材分规范.规定了易燃性的环氧斜交帘布层的线性纤维玻璃增强的包铜的 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test) copper clad |
| BS EN 61249-2-2-2005 | 印制板和其它互连结构用材料.第2-2部分:包覆和非包覆增强基材.覆铜高电级酚醛纤维素纸增强的叠层板 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| BS EN 61249-2-21-2004 | 印制板和其他互联结构用材料.包被和非包被增强基材分规范集.阻燃型(垂直燃烧试验)铜包被的非卤化环氧编织E | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-22-2005 | 印制板和其他互连结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的改良的非卤化环氧编织E型 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-23-2005 | 印制板和其他互连结构用材料.包被和非包被增强基材.铜包被的经济级非卤化酚醛纤维素纸增强层压板 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets , economic grade, copper-clad |
| BS EN 61249-2-26-2005 | 印制板和其他互连结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的非卤化环氧非编织/编织E型 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-4-2002 | 互连结构用材料.包层和非包层增强的基材分规范.规定了易燃性的聚酯非编织/编织玻璃纤维铜包的层压板(垂直燃 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-5-2004 | 印制板和其他互联结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的溴化环氧纤维素纸增强芯/ | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-6-2004 | 印制板和其他互联结构用材料.包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的溴化环氧非编织/编织的E型 | Materials for printed boards and other interconnecting structures - Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-8-2003 | 互连结构用材料.包被和非包被增强基材分规范.包被和非包被增强基材.规定了易燃性的包铜改良溴化环氧编织玻 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Reinforced base materials clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-2-9-2003 | 互连结构用材料.包被和非包被增强基材分规范.包被和非包被增强基材.规定了易燃性的包铜二顺丁烯二酰亚胺/三 | Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| BS EN 61249-4-11-2005 | 印制板和其他互连结构用材料.第4-11部分:非包被预浸料的分规范集.阻燃型非卤化环氧编织E型玻璃纤维预浸料 | Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide woven E-glass prepeg of defined flammability |
| BS EN 61249-4-12-2005 | 印制板和其他互连结构用材料.第4-12部分:非包被预浸料的分规范集.阻燃型非卤化多功能环氧编织E型玻璃纤维预 | Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability |
| BS EN 61249-4-2-2005 | 印制板和其他互连结构用材料.第4-2部分:非包被预浸料的分规范集.阻燃型多功能环氧编织E型玻璃纤维预浸料 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional expoxide woven E-glass prepeg of defined flammability |
| BS EN 61249-4-5-2005 | 印制板和其他互连结构用材料.第4-5部分:非包被预浸料的分规范集.阻燃型改良或未改良聚酰亚胺编织E型玻璃纤 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification set for prepreg materials, unclad Polymide, modified or unmodified, woven E-glass prepeg of defined flammability |
| BS EN 61274-1-1-2006 | 纤维光学连接器用适配器.第1-1部分:空白详细规范 | Adaptors for fibre optic connectors - Part 1-1: Blank detail specification |
| BS EN 61280-1-4-2003 | 光纤通信子系统基本试验程序.一般通信子系统的试验程序.多模纤维激光发射机用二维近场数据的采集和整理 | Fibre optic communication subsystem basic test procedures - Test procedures for general communication subsystems - Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters |
| BS EN 61280-2-1-1999 | 纤维光学通信子系统基本试验程序.数字系统试验程序.接收器灵敏度和过载测量 | Fibre optic communication subsystem basic test procedures - Test procedures for digital systems - Receiver sensitivity and overload measurement - Test procedures for digital systems - Receiver sensitivity and overload measurement |
| BS EN 61280-2-10-2005 | 纤维光学通信子系统试验规程.数字系统.激光发射器的时间分辨线性调频脉冲和α指数测量 | Fibre optic communication subsystem test procedures - Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| BS EN 61280-4-1-2004 | 纤维光学通信子系统试验程序.光缆设施和链路.多模光缆设施衰减测量 | Fibre-optic communication subsystem test procedures - Cable plant and links - Multimode fibre optic cable plant attenuation measurement |
| BS EN 61290-10-1-2003 | 光学纤维放大器.试验方法.多道参数.使用光学开关和光谱分析仪的脉冲法 | Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer |
| BS EN 61290-10-2-2003 | 光学纤维放大器.试验方法.多道参数.选通光频谱分析仪脉冲法 | Optical amplifiers - Test methods - Multichannel parameters - Pulse method using a gated optical spectrum analyzer |
| BS EN 61290-10-3-2003 | 光学纤维放大器.试验方法.多道参数.探测法 | Optical amplifiers - Test methods - Multichannel parameters - Probe methods |
| BS EN 61290-3-1-2004 | 光学纤维放大器.基础规范.噪音数字参数的测试方法.光谱分析仪法 | Optical fibre amplifiers - Basic specification - Test methods for noise figure parameters - Optical spectrum analyzer method |
| BS EN 61291-4-2003 | 光学纤维放大器.多信道应用.性能规范模板 | Optical fibre amplifiers - Multichannel applications - Performance specification template |
| BS EN 61300-1-2003 | 纤维光学互连器件和无源元件.基本试验和测量程序.总则和指南 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - General and guidance |
| BS EN 61300-2-12-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-12部分:试验.冲击 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact |
| BS EN 61300-2-14-2006 | 纤维光学互联装置和无源元件.基本试验和测量程序.试验.光学功率控制和损坏阈特性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Optical power handling and damage threshold characterization |
| BS EN 61300-2-16-2006 | 纤维光学互连器件和无源元件.基本试验和测量规程.第2-16部分:试验.霉菌生长 | Fibre optic interconnecting devices and passive components - Basictest and measurement procedures - Part 2-16: Tests - Mould growth |
| BS EN 61300-2-18-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-18部分:试验.干热.高温耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
| BS EN 61300-2-19-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-19部分:试验.湿热(稳态) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) |
| BS EN 61300-2-22-2007 | 纤维光学互连装置和无源元件.基本试验和测量程序.试验.温度变化 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Change of temperature |
| BS EN 61300-2-24-2000 | 纤维光学互连器件和无源元件.基本试验和测量程序.试验.用施加应力进行陶瓷准直套管筛选 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of ceramic alignment split sleeve by stress application - Section 24 Screen testing of ceramic alignment split sleeve by stress application |
| BS EN 61300-2-26-2007 | 纤维光学互连装置和无源元件.基本试验和测量程序.试验.盐雾 | Fibre optic interconnecting devices and passive Components - Basic test and measurement procedures - Tests - Salt mist |
| BS EN 61300-2-33-2007 | 纤维光学互联装置和无源部件.基本试验和测量程序.试验.光缆接头盒组装和拆卸 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Assembly and disassembly of fibre optic closures |
| BS EN 61300-2-37-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.试验.纤维光学外壳的光缆弯曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Cable bending for fibre optic closures |
| BS EN 61300-2-38-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-38部分:试验.加压纤维光学器件外壳的密封 | Fibre optic interconnecting devices and passive components — Basictest and measurement procedures — Part 2-38: Tests — Sealing forpressurized fibre optic closures |
| BS EN 61300-2-4-1997 | 光纤互联装置和无源部件.基本试验和测量程序.试验.纤维/电缆牢固性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention |
| BS EN 61300-2-40-2001 | 纤维光学互连器件和无源元件.基本试验和测量程序.试验.单模调整式有角度光纤光缆连接器衰减的筛选 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of attenuation of single-mode tuned angled optical connectors - Section 40: Test method for screen testing of attenuation of single mode tuned angled optical fibre connectors |
| BS EN 61300-2-42-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-42部分:试验.连接器静态侧向负荷 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors |
| BS EN 61300-2-43-2000 | 纤维光学互连器件和无源元件.基本试验和测量程序.试验.单模PC光纤连接器回波损耗的筛选 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Screen testing of return loss of single mode PC optical fibre connectors - Section 43: Screen testing of return loss of single mode PC optical fibre connectors |
| BS EN 61300-2-44-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.试验.纤维光学器件应力消除的挠曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Flexing of the strain relief of fibre optic devices |
| BS EN 61300-2-46-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.试验.湿热循环 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Damp heat cyclic |
| BS EN 61300-2-47-2007 | 纤维光学互联装置和无源部件.基本试验和测量程序.试验.热冲击 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Thermal shocks |
| BS EN 61300-2-49-2007 | 纤维光学互连装置和无源元件.基本试验和测量程序.试验.连接器安装试验 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Connector installation test |
| BS EN 61300-2-50-2007 | 纤维光学互连装置和无源元件.基本试验和测量程序.试验.带静载荷的纤维光学连接器检验试验.单模和多模 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre optic connector proof test with static load - Singlemode and multimode |
| BS EN 61300-2-51-2007 | 纤维光学互连装置和无源元件.基本试验和测量程序.试验.带外加拉伸负载的传输用纤维光学连接器试验.单模和多 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode |
| BS EN 61300-3-1-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-1部分:检验和测量.目视检验 | Fire optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
| BS EN 61300-3-10-2007 | 纤维光学互连装置和无源元件.基本试验和测量程序.检验和测量.量规保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Gauge retention force |
| BS EN 61300-3-14-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.检查和测量.可变衰减器衰减设置的准确性和重复性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator |
| BS EN 61300-3-15-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.检查和测量.凸形抛光金属环端面的圆顶偏心度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Dome eccentricity of a convex polished ferrule endface |
| BS EN 61300-3-17-2000 | 纤维光学互连器件和无源元件.基本试验和测量程序.检查和测量.套管角度抛光端面的曲率角度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface angle of angle-polished ferrules - Examinations and measurements - Endface angle of angle-polished ferrules |
| BS EN 61300-3-18-2006 | 纤维光学互联装置和无源元件.基本试验和测量程序.倾角端面连接器的键控精度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Keying accuracy of an angled endface connector |
| BS EN 61300-3-23-1998 | 光纤互连装置和无源部件.基本试验和测量程序.检查和测量.纤维与金属箍末端的相对位置 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examination and measurements - Fibre position relative to ferrule endface |
| BS EN 61300-3-24-2007 | 纤维光学互连器件和无源元件.基本试验和测量程序.检查和测量.偏振保持光纤用光学连接器的键控精度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre |
| BS EN 61300-3-27-1997 | 纤维光学互连器件和无源元件.基本试验和测量程序.检查和测量.多路连接器插头的孔位测量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement method for the hole location of a multiway connector plug - Section 27: Measurement method for the hole location of a multiway connector plug |
| BS EN 61300-3-29-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.检验和测量.表征密集波分复用(DWDM)元件的光谱传输功能振 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components |
| BS EN 61300-3-32-2006 | 纤维光学互连装置和无源元件.基本试验和测量程序.检查和测量.无源光学元件的偏振模式色散测量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Polarization mode dispersion measurement for passive optical components |
| BS EN 61300-3-33-1999 | 纤维光学互连器件和无源元件.基本试验和测量程序.检查和测量.套管分离力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Examinations and measurements - Ferrule withdrawal force - Ferrule withdrawal force |
| BS EN 61300-3-37-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.检验和测量.角抛光光纤的端面角 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Endface angle of angle- polished optical fibres |
| BS EN 61300-3-40-1998 | 光纤互联装置和无源部件.基本试验和测量程序.检验和测量.极化维持(PM)纤维软导线连接器消光比 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector |
| BS EN 61314-1-1-2006 | 纤维光学扇形输出器.空白详细规范 | Fibre optic fan-outs - Blank detail specification |
| BS EN 61314-1-2005 | 纤维光学风扇.第1部分:总规范 | Fibre optic fan-outs - Part 1: Generic specification |
| BS EN 61753-022-2-2003 | 光纤互连器件和无源元件性能标准.C类端接在多模纤维上的光纤连接器.受控环境 | Fibre optic interconnecting devices and passive components performance standard - Fibre optic connectors terminated on multimode fibre for category C. Controlled environment |
| BS EN 61753-051-3-2002 | 纤维光学互连器件和无源部件性能标准.U类单模光纤插接式固定衰减器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Single-mode fibre, plug-style fixed attenuators for category U. Uncontrolled environment |
| BS EN 61753-052-3-2002 | 纤维光学互连装置和无源元件性能标准.U类单模光纤带引线固定的衰减器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Single-mode fibre, pigtailed-style fixed attenuators for category U. Uncontrolled environment |
| BS EN 61753-053-3-2004 | 纤维光学互连器件和无源元件性能标准.U类连续可变衰减器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Continuously variable attenuators for category U. Uncontrolled environment |
| BS EN 61753-091-3-2004 | 纤维光学互连器件和无源元件性能标准.U类单模纤维光学有抽头的循环器.非受控环境 | Fibre optic interconnecting devices and passive components performance standards - Performance standard - Single-mode fibre optic pigtailed style circulators for category U. Uncontrolled environment |
| BS EN 61753-101-2-2006 | 纤维光学互连器件和无源元件性能标准.第101-2部分:受控环境的C类光纤管理系统 | Fibre optic interconnecting devices and passive components performance standard — Part 101-2: Fibre management systemsfor category C — Controlled environment |
| BS EN 61754-10-2005 | 纤维光学连接器接口.第10部分:微型MPO连接器系列 | Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family |
| BS EN 61754-13-2006 | 纤维光学连接器接口.FC-PC型连接器 | Fibre optic connector interfaces - Type FC-PC connector |
| BS EN 61754-18-2002 | 纤维光学连接器接口.MT-RJ型连接器族 | Fibre optic connector interfaces - Type MT-RJ connector family |
| BS EN 61754-21-2005 | 纤维光学连接器接口.塑料光纤的SMI型连接器门类 | Fibre optic connector interfaces - Type SMI connector family for plastic optical fibre |
| BS EN 61754-22-2005 | 纤维光学连接器接口.F-SMA型连接器族 | Fibre optic connector interfaces - Type F-SMA connector family |
| BS EN 61754-23-2005 | 纤维光学连接器接口.LX.5型连接器门类 | Fibre optic connector interfaces - Type LX.5 connector family |
| BS EN 61754-5-2005 | 纤维光学连接器接口.第5部分:MT型连接器系列 | Fibre optic connector interfaces - Part 5: Type MT connector family |
| BS EN 61754-7-2005 | 纤维光学连接器接口.MPO型连接器门类 | Fibre optic connector interfaces - Type MPO connector family |
| BS EN 61755-1-2006 | 纤维光学连接器的光学接口.单一模式非色散移位纤维的光学接口.总则和指南 | Fibre optic connector optical interfaces - Optical interfaces for single mode non-dispersion shifted fibres - General and guidance |
| BS EN 61755-2-1-2006 | 纤维光学连接器的光学接口.光学接口标准单模非物理角接触光纤 | Fibre optic connector optical interfaces - Optical interface standard single mode non-angled physically contacting fibres |
| BS EN 61755-2-2-2006 | 纤维光学连接器光学接口.第2-2部分:标准物理角连接单模光纤的光学接口 | Fibre optic connector optical interfaces — Part 2-2: Optical interface standard single mode angled physically contacting fibres |
| BS EN 61755-3-5-2006 | 纤维光学连接器的光学接口.第3-5部分:光学接口.使用铜-镍合金作为单模纤维光纤接口材料用的直径2.5mm和1.25 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single modefibre |
| BS EN 61755-3-6-2006 | 纤维光学连接器的光学接口.第3-6部分:光接口.用铜-镍合金作为纤维环绕材料的单模光纤直径2.5mm和1.25mm圆柱 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degreesangled-PC composite ferrule using Cu-Ni-alloy as fibre surroundingmaterial, single mode fibre |
| BS EN 61756-1-2006 | 纤维光学互连装置和无源元件.纤维管理系统的接口标准.总则和指南 | Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - General and guidance |
| BS EN 61977-2002 | 纤维光学过滤器.总规范 | Fibre optic filters - Generic specification |
| BS EN 62005-7-2004 | 纤维光学互连装置和无源光学元件的可靠性.寿命应力模型 | Reliability of fibre optic interconnecting devices and passive optical components - Life stress modeling |
| BS EN 62148-1-2002 | 纤维光学的有源元器件和装置.封装和接口标准.总则和规范 | Fibre optic active components and devices - Package and interface standards - General and guidance |
| BS EN 62148-11-2004 | 纤维光学有源元件及器件.包装和接口标准.14针调制器集成激光二极管发射机 | Fibre optic active components and devices - Package and interface standards - 14-pin modulator-integrated laser diode transmitters |
| BS EN 62148-12-2004 | 纤维光学有源元件和器件.包装和接口标准.带同轴RF连接器的激光发射机 | Fibre optic active components and devices - Package and interface standards - Laser transmitters with coaxial RF connector |
| BS EN 62148-4-2004 | 纤维光学有源元件和器件.包装和接口标准.PN 1x9塑料光纤无线电收发信机 | Fibre optic active components and devices - Package and interface standards - PN 1x9 plastic optical fibre transceivers |
| BS EN 62148-6-2003 | 纤维光学有源元件及器件.包装和接口标准.ATM-PON无线电收发信机 | Fibre optic active components and devices - Package and interface standards - ATM-PON transceivers |
| BS EN 62149-1-2004 | 纤维光学有源元件及器件.性能标准.通则和指南 | Fibre optic active components and devices - Performance standards - General and guidance |
| BS EN 62149-3-2004 | 纤维光学有源元件和器件.性能标准.2.5Gbit/s调制器-集成激光二极管发射机 | Fibre optic active components and devices - Performance standards - 2,5 Gbit/s modulator-integrated laser diode transmitters |
| BS EN 62149-5-2004 | 纤维光学有源元件和器件.性能标准.带LD驱动及CDR IC的ATM-PON无线电收发信机 | Fibre optic active components and devices - Performance standards - ATM-PON transceivers with LD driver and CDR ICs |
| BS EN 62149-6-2004 | 纤维光学有源元件和器件.性能标准.650nm、250Mbit/s塑料光纤无线电收发信机 | Fibre optic active components and devices - Performance standards - 650-nm 250-Mbit/s plastic optical fibre transceivers |
| BS EN 62150-1-2005 | 纤维光学有源元件和器件.试验和测量规程.总则和指南 | Fibre optic active components and devices - Test and measurement procedures - General and guidance |
| BS EN 62150-2-2005 | 纤维光学有源元件和器件.试验和测量规程.ATM-PON无线电收发信机 | Fibre optic active components and devices - Test and measurement procedures - ATM-PON transceivers |
| BS EN 622-1-2003 | 纤维板.规范.一般要求 | Fibreboards - Specifications - General requirements |
| BS EN 622-2-2004 | 纤维板.规范.硬质纤维板的要求 | Fibreboards - Specifications - Requirements for hardboards |
| BS EN 622-3-2004 | 纤维板.规范.中等板材的要求 | Fibreboards - Specifications - Requirements for medium boards |
| BS EN 622-4-1997 | 纤维板.规范.软质纤维板的要求 | Fibreboards - Specifications - Requirements for softboards |
| BS EN 622-5-2006 | 纤维板.规范.干燥处理板(MDF)的要求 | Fibreboards - Specifications - Requirements for dry process boards (MDF) |
| BS EN 637-1995 | 塑料管道系统.玻璃纤维增强塑料部件.用重量法测定组分量 | Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method |
| BS EN 761-1995 | 塑料管道系统.玻璃纤维增强热固性塑料管.干燥条件下蠕变系数的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |
| BS EN 766-1994 | 食品运输用口袋.黄麻纤维编织口袋 | Sacks for the transport of food aid - Sacks made of jute fabric |
| BS EN 872-2005 | 水质.悬浮固体的测定.用玻璃纤维过滤器过滤的方法 | Water quality - Determination of suspended solids - Method by filtration through glass fibre filters |
| BS EN 978-1997 | 玻璃纤维增强塑料地下水箱.ALPHA因子和β因子的测定 | Underground tanks of glass-reinforced plastics (GRP) - Determination of factor and factor |
| BS EN ISO 10306-1995 | 纺织品.棉纤维成熟度的气流评定法 | Textiles - Cotton fibres - Evaluation of maturity by the air flow method |
| BS EN ISO 10350-2-2001 | 塑料.可比单点数据的采集和表示法.第2部分:长纤维增强塑料 | Plastics - Acquisition and presentation of comparable single-point data - Long-fibre-reinforced plastic |
| BS EN ISO 10352-1997 | 纤维增强塑料.模塑化合物和预浸料坯.单位面积质量的测定 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area |
| BS EN ISO 10548-2003 | 碳纤维.胶料含量的测定 | Carbon fibre - Determination of size content |
| BS EN ISO 1061-1999 | 塑料.未增塑的醋酸纤维素.游离酸度的测定 | Plastics - Unplasticized cellulose acetate - Determination of free acidity |
| BS EN ISO 10618-2004 | 碳纤维.树脂浸渍纱拉伸性能的测定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn |
| BS EN ISO 1140-2004 | 纤维绳索.聚酰胺.3、4和8股绞绳 | Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes |
| BS EN ISO 1141-2004 | 纤维绳索.聚酯.3、4和8股绞绳 | Fibre ropes - Polyester - 3-, 4- and 8-strand ropes |
| BS EN ISO 11667-2000 | 纤维增强塑料.模压化合物和聚酯胶片.树脂、增强的纤维和矿物填料含量的测定.溶解方法 | Fibre reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforcement-fibre and mineral-filler content - Dissolution methods |
| BS EN ISO 1172-1999 | 纺织玻璃纤维增强塑料.聚酯胶片,模制混合物和叠层材料.纺织玻璃纤维和矿物添充物含量的测定.煅烧法 | Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods |
| BS EN ISO 11721-1-2001 | 纺织品.纤维素纺织品抗菌性的测定.土埋试验.防腐处理的评定 | Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Assessment of rot-retardant finishing |
| BS EN ISO 11721-2-2003 | 纺织品.纤维素纺织品抗菌性的测定.土埋试验.防腐处理长期有效性的鉴定 | Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Identification of long-term resistance of a rot retardant finish |
| BS EN ISO 1181-2004 | 纤维绳索.马尼拉麻和剑麻.3、4和8股绞绳 | Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes |
| BS EN ISO 12114-1997 | 纤维增强塑料.热固性模塑化合物和聚酯胶片.固化特性的测定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics |
| BS EN ISO 12115-1997 | 纤维增强塑料.热固性模塑化合物和聚酯胶片.流动性、熟化期和储存期限的测定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life |
| BS EN ISO 12215-1-2000 | 小艇.船体结构和船材尺寸.材料：玻璃纤维增强热固性树脂标准层压板材 | Small craft - Hull construction and scantlings - Materials - Thermosetting resins, glass-fibre reinforcement, reference laminate |
| BS EN ISO 12947-1-1999 | 纺织品.用马丁代尔（Martindale)法对织物抗磨损性的测定.马丁代尔耐磨试验仪00000000000000000000000物.Mar | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Martindale abrasion testing apparatus |
| BS EN ISO 13002-1999 | 碳纤维.长丝纱命名体系 | Carbon fibre - Designation system for filament yarns |
| BS EN ISO 1346-2004 | 纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3).3、4和8股绳索 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity (PP3) - 3-, 4- & 8- strand ropes |
| BS EN ISO 13938-1-1999 | 纺织品.纤维胀破特性.胀破强度和胀破膨胀测定的液压方法 | Textiles - Bursting properties of fabrics - Hydraulic method for determination of bursting strength and bursting distension |
| BS EN ISO 13938-2-1999 | 纺织品.纤维破碎特性.对破碎强度和破碎膨胀力的气动测定方法 | Textiles - Bursting properties of fabrics - Pneumatic method for determination of bursting strength and bursting distension |
| BS EN ISO 14125-1998 | 纤维增强塑料复合材料.挠性性能的测定 | Fibre-reinforced plastic composites - Determination of flexural properties |
| BS EN ISO 14126-1999 | 纤维增强塑料复合材料.平面方向压缩性的测定 | Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction |
| BS EN ISO 14129-1998 | 纤维增强塑料复合材料.用<+或->45°张力试验法测定平面剪切应力/剪切应变反应，包括平面剪切量和剪切强度 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the <+OR-> 45 ° tension test method |
| BS EN ISO 14130-1998 | 纤维增强塑料复合材料.用短试片测定表观层间粘合剪切强度 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method |
| BS EN ISO 14692-1-2003 | 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.词汇、符号、应用和材料 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Vocabulary, symbols, applications and materials |
| BS EN ISO 14692-2-2003 | 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.合格评定和生产 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Qualification and manufacture |
| BS EN ISO 14692-3-2003 | 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.系统设计 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - System design |
| BS EN ISO 14692-4-2003 | 石油和天然气工业.玻璃纤维增强塑料(GRP)管道.制造、安装和运行 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Fabrication, installation and operation |
| BS EN ISO 15630-2-2002 | 混凝土的钢筋和预应力用钢.试验方法.焊接纤维 | Steel for the reinforcement and prestressing of concrete - Test methods - Welded fabric |
| BS EN ISO 1598-2000 | 塑料.乙酸纤维素.不可溶颗粒的测定 | Plastics - Cellulose acetate - Determination of insoluble particles |
| BS EN ISO 1599-1999 | 塑料.醋酸纤维素.模塑时粘度降低的测定 | Plastics - Cellulose acetate - Determination of viscosity loss on moulding |
| BS EN ISO 1600-1999 | 塑料.乙酸纤维素.利用热的不同周期测定模制样品中的光吸收量 | Plastics - Cellulose acetate - Determination of light absorption of moulded specimens produced using different periods of heating |
| BS EN ISO 16000-7-2007 | 室内空气.空气中石棉纤维浓度测定用取样策略 | Indoor air - Sampling strategy for determination of airborne asbestos fibre concentrations |
| BS EN ISO 16472-2006 | 动物饲料.精制淀粉酶中性清洁剂纤维(aNDF)含量的测定 | Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) |
| BS EN ISO 1968-2004 | 纤维绳索和绳索制品.词汇 | Fibre ropes and cordage - Vocabulary |
| BS EN ISO 1969-2004 | 纤维绳索.聚乙烯.3和4股绳索 | Fibre ropes - Polyethylene - 3- and 4-strand ropes |
| BS EN ISO 2307-2005 | 纤维绳索.特定物理和机械性能的测定 | Fibre ropes - Determination of certain physical and mechanical properties |
| BS EN ISO 2398-1996 | 压缩空气用纺织纤维增强橡胶软管规范 | Rubber hose, textile-reinforced, for compressed air - Specification |
| BS EN ISO 5079-1996 | 纺织纤维.单纤维断裂时断裂力和伸长率的测定 | Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres |
| BS EN ISO 527-4-1997 | 塑料.抗拉性能测定.第4部分:正交同性和正交异性纤维试验条件.增强塑料复合材料 | Plastics - Determination of tensile properties - Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| BS EN ISO 527-5-1997 | 塑料.抗拉性能测定.第5部分:单向纤维试验条件.增强塑料复合材料 | Plastics - Determination of tensile properties - Test conditions for unidirectional fibre-reinforced plastic composites |
| BS EN ISO 585-1999 | 塑料.非增塑的乙酸纤维素.水分含量的测定 | Plastics - Unplasticized cellulose acetate - Determination of moisture content |
| BS EN ISO 6888-2-1999 | 食品和动物饲料的微生物学.凝血酶阳性葡萄球菌(金黄色葡萄球菌及其他属种)计数的水平方法.兔血浆纤维蛋白原 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Technique using rabbit plasma fibrinogen agar medium |
| BS EN ISO 75-2-2004 | 塑料.载荷下挠曲温度的测定.塑料、硬橡胶和长纤维增强合成物 | Plastics - Determination of temperature of deflection under load - Plastics and ebonite |
| BS EN ISO 7822-1999 | 纺织玻璃纤维增强的塑料.空隙量的测定.灼烧损失、机械粉碎和统计计数法 | Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods |
| BS EN ISO 9163-2005 | 纺织玻璃纤维.粗纱.试样的制备和浸渍粗纱拉伸强度的测定 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| BS EN ISO 9237-1995 | 纺织品.纤维织物透气性的测定 | Textiles - Determination of the permeability of fabrics to air |
| BS EN ISO 9554-2005 | 纤维绳索.一般规范 | Fibre ropes - General specifications |
| BS F 125-1973 | 橡胶粘合压缩石棉纤维垫片规范 | Specification for rubber bonded compressed asbestos fibre jointing |
| BS F 138-1991 | 航空航天用聚酯纤维平纹(线轴)网规范 | Specification for polyester plain (bobbin) netting suitable for aerospace purposes |
| BS F 141-1992 | 航空航天用密织棉纤维(L28和L34)规范 | Specification for closely woven cotton fabrics (L28 and L34) for aerospace purposes |
| BS IEC 60874-10-1-1999 | 光纤和光缆连接器.第10-1部分:与A1型多模纤维连接的BFOC/2.5光纤连接器详细规范 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type BFOC/2,5 terminated to multimode fibre type A1 |
| BS IEC 60874-10-2-1999 | 光纤和光缆连接器.第10-2部分:与B1型单模纤维连接的BFOC/2.5光纤连接器详细规范 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type BFOC/2,5 terminated to single-mode fibre type B1 |
| BS IEC 60874-10-3-1998 | 光纤和光缆用连接器.单模式和多模式纤维用BFOC/2,5型纤维光学适配器详细规范 | Connectors for optical fibres and cables - Detail specification for fibre optic adaptor type BFOC/2,5 for single and multimode fibre |
| BS IEC 60874-14-1-1998 | 光纤和电缆连接器.连接A1a,A1b型多模式纤维的SC-PC型标准光纤连接器的详细规范 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b |
| BS IEC 60874-14-3-1998 | 第14部分：光纤和光缆连接器.第3节：单模式纤维用SC型光纤连接器(单一型)的详细规格 | Detail specification for fibre optic adaptor (simplex) type SC for single-mode fibre |
| BS IEC 60874-14-4-1998 | 第14部分：光纤和光缆连接器.第4节：多模式纤维用SC型光纤连接器(单一型)的详细规格 | Detail specification for fibre optic adaptor (simplex) type SC for multimode fibre |
| BS IEC 60874-14-5-1998 | 光纤和光缆连接器.第14-5部分:连接B1型单模式纤维的SC-PC型不调谐光纤连接器详细规格 | Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC untuned terminated to single-mode fibre type B1 |
| BS ISO 10119-2002 | 碳纤维.测定密度 | Carbon fibre - Determination of density |
| BS ISO 10312-1995 | 周围环境空气.石棉纤维的测定.直接传递透射电子显微法 | Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method |
| BS ISO 10371-1995 | 纤维加强塑料.复合加强材料用编织带.规范基础 | Fibre reinforced plastics - Braided tapes for composite materials reinforcement - Basis for a specification |
| BS ISO 105-F07-2002 | 纺织品.色牢度试验.再生醋酸纤维贴衬织物规范 | Textiles - Tests for colour fastness - Specification for secondary acetate adjacent fabric |
| BS ISO 10635-2000 | 耐火制品.陶瓷纤维制品的试验方法 | Refractory products - Methods of test for ceramic fibre products |
| BS ISO 11566-1996 | 碳纤维.单丝样品抗拉性能的测定 | Carbon fibre - Determination of the tensile properties of single-filament specimens |
| BS ISO 11567-1996 | 碳纤维.长丝直经和横截面积的测定 | Carbon fibre - Determination of filament diameter and cross-sectional area |
| BS ISO 11667-1997 | 纤维增强塑料.模压化合物和聚酯胶片.树脂、增强纤维和矿物填料含量测定.溶解方法 | Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS ISO 11861-1999 | 纺织品地板覆盖物.椰壳粗纤维垫.类型和规范 | Textile floor coverings - Coir mats - Types and specification |
| BS ISO 1268-1-2002 | 纤维增强塑料.试验板的制备方法.通用条件 | Fibre-reinforced plastics - Methods of producing test plates - General conditions |
| BS ISO 1268-10-2005 | 纤维增强塑料.试验板的生产方法.BMC和其他长纤维化合物的注射模塑法.多用途试样的一般原则和模制 | Fibre-reinforced plastics - Methods of producing test plates - Injection moulding of BMC and other long-fibre compounds - General principles and moulding of multipurpose test specimens |
| BS ISO 1268-11-2005 | 纤维增强塑料.试验板的生产方法.BMC和其他长纤维化合物的注射模塑法.小型试验板 | Fibre-reinforced plastics - Methods of producing test plates - Injection moulding of BMC and other long-fibre moulding compounds - Small plates |
| BS ISO 1268-2-2001 | 纤维增强塑料.试验板的制备方法.接触模压法和喷射成形法 | Fibre-reinforced plastics - Methods of producing test plates - Contact and spray-up moulding |
| BS ISO 1268-3-2001 | 纤维增强塑料.试验板的制备方法.湿压缩模塑法 | Fibre-reinforced plastics - Methods of producing test plates - Wet compression moulding |
| BS ISO 1268-4-2006 | 纤维增强塑料.试验用板材的生产方法.预浸料坯的摸制 | Fibre-reinforced plastics - Methods of producing test plates - Moulding of prepregs |
| BS ISO 1268-5-2001 | 纤维增强塑料.试验板的制备方法.长纤维缠绕 | Fibre-reinforced plastics - Methods of producing test plates - Filament winding |
| BS ISO 1268-6-2002 | 纤维增强塑料.试验用板材的生产方法.拉挤压制件 | Fibre-reinforced plastics - Methods of producing test plates - Pultrusion moulding |
| BS ISO 1268-7-2001 | 纤维增强塑料.试验板的生产方法.树脂转换模塑法 | Fibre-reinforced plastics - Methods of producing test plates - Resin transfer moulding |
| BS ISO 1268-8-2004 | 纤维增强塑料.试验板的生产方法.SMC和BMC压模 | Fibre-reinforced plastics - Methods of producing test plates - Compression moulding of SMC and BMC |
| BS ISO 1268-9-2003 | 纤维增强塑料.试验板的制备方法.GMT/STC的模制 | Fibre-reinforced plastics - Methods of producing test plates - Moulding of GMT/STC |
| BS ISO 13003-2004 | 纤维增强塑料.循环载荷条件下疲劳性能的测定 | Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions |
| BS ISO 13794-1999 | 环境空气.石棉纤维的测定.间接传递电子显微镜法 | Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method |
| BS ISO 13820-1997 | 纸、纸板和波纹纤维板.压缩试验设备的描述和校准 | Paper, board and corrugated fibreboard - Description and calibration of compression testing equipment |
| BS ISO 13821-2002 | 波纹纤维板.耐沿边缘挤压性的测定.上蜡边缘法 | Corrugated fibreboard - Determination of edgewise crush resistance - Waxed edge method |
| BS ISO 14966-2002 | 环境空气.无机纤维颗粒的数值浓度的测定.扫描电子显微镜检查法 | Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method |
| BS ISO 15024-2002 | 纤维增强塑料复合材料.无方向性增强材料的模式I层间断裂韧性，GDOWNiDOWNc,的测定 | Fibre-reinforced plastic composites - Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials |
| BS ISO 15100-2001 | 塑料制品.增强纤维.短切原丝.松密度的测定 | Plastics - Reinforcement fibres - Chopped strands - Determination of bulk density |
| BS ISO 15570-1999 | 纤维素乙酸酯辐射剂量测定系统的实施规程 | Practice for use of cellulose acetate dosimetry system |
| BS ISO 15840-2006 | 船舶和海上技术.海上设备用热固性树脂纤维玻璃管和管件的标准规范 | Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| BS ISO 16065-1-2001 | 纸浆.采用自动光学分析法对纤维长度的测定.极化光法 | Pulps - Determination of fibre length by automated optical analysis - Polarized light method |
| BS ISO 16065-2-2007 | 纸浆.用自动光学分析法测量纤维长度.非偏振光法 | Pulps - Determination of fibre length by automated optical analysis - Unpolarized light method |
| BS ISO 16549-2005 | 纺织材料.纤维绳的不匀性.容量法 | Textiles - Unevenness of textile strands - Capacitance method |
| BS ISO 17771-2003 | 塑料.热固性模制化合物.SMC中纤维润湿程度的测定 | Plastics - Thermoset moulding compounds - Determination of the degree of fibre wetting in SMC |
| BS ISO 18692-2007 | 海上位置保持用纤维绳索.聚酯 | Fibre ropes for offshore stationkeeping - Polyester |
| BS ISO 1887-1995 | 纺织玻璃纤维.可燃物质含量测定 | Textile glass - Determination of combustible-matter content |
| BS ISO 1888-1997 | 纺织玻璃纤维.人造纤维或长丝.平均直径的测定 | Textile glass - Staple fibres or filaments - Determination of average diameter |
| BS ISO 2076-2000 | 纺织品.人造纤维.属名 | Textiles - Man-made fibres - Generic names |
| BS ISO 2113-1996 | 增强纤维.机织织物.规范基础 | Reinforcement fibres - Woven fabrics - Basis for a specification |
| BS ISO 22314-2006 | 塑料.玻璃纤维增强产品.纤维长度测定 | Plastics - Glass-fibre-reinforced products - Determination of fibre length |
| BS ISO 23713-2005 | 纸浆.用自动光学分析测定纤维粗度.偏振光法 | Pulps - Determination of fibre coarseness by automated optical analysis - Polarized light method |
| BS ISO 2559-2001 | 纺织玻璃纤维.垫(由短线或连续的绞捻线制).名称和基本规范 | Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications |
| BS ISO 3341-2000 | 纺织玻璃纤维.纱线.断裂力和断裂伸长的测定 | Textile glass - Yarns - Determination of breaking force and breaking elongation |
| BS ISO 3342-1995 | 纺织玻璃纤维.织物.抗拉强度的测定 | Textile glass - Mats - Determination of tensile breaking force |
| BS ISO 3597-1-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.棒的一般考虑和制备 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - General considerations and preparation of rods |
| BS ISO 3597-2-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.弯曲强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of flexural strength |
| BS ISO 3597-3-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.压缩强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of compressive strength |
| BS ISO 3597-4-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.表观层间剪切强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Determination of apparent interlaminar shear strength |
| BS ISO 36-2006 | 硬化或热塑橡胶.测定与柔质纤维粘合性 | Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics |
| BS ISO 3616-2001 | 纺织玻璃纤维.短切原丝和连续长丝织毯.平均厚度,加载厚度和压缩回复厚度的测定 | Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression |
| BS ISO 4603-1996 | 纺织玻璃纤维.织物.厚度测定 | Textile glass - Woven fabrics - Determination of thickness |
| BS ISO 4606-1995 | 纺织玻璃纤维.织物.采用抓损疵法对断裂张力和断裂延性的测定 | Textile glass - Woven fabric - Determination of tensile breaking force and elongation at break by the strip method |
| BS ISO 4912-2002 | 纺织品.棉纤维.成熟度估计.显微法 | Textiles - Cotton fibres - Evaluation of maturity - Microscopic method |
| BS ISO 5350-4-2006 | 纸浆.尘埃和纤维素的估计.用等值黑色面积(EBA)法反射光的检验仪器 | Pulps - Estimation of dirt and shives - Instrumental inspection by reflected light using equivalent black area (EBA) method |
| BS ISO 6741-1-2002 | 纺织品.纤维和纱线.寄销货物商业质量的测定.质量的测定和计算 | Textiles - Fibres and yarns - Determination of commercial mass of consignments - Mass determination and calculations |
| BS ISO 6741-2-2002 | 纺织品.纤维和纱线.寄销货物商业质量的测定.获取实验室样品的方法 | Textiles - Fibres and yarns - Determination of commercial mass of consignments - Methods for obtaining laboratory samples |
| BS ISO 6741-3-2002 | 纺织品.纤维和纱线.寄销货物商业质量的测定.样品净化程序 | Textiles - Fibres and yarns - Determination of commercial mass of consignments - Specimen cleaning procedures |
| BS ISO 6989-2002 | 纺织纤维.短纤维长度和长度分布的测定(用单纤维的测定) | Textiles fibres - Determination of length and length distribution of staple fibres (by measurement of single fibres) |
| BS ISO 8605-2001 | 玻璃纤维增强塑料.片状模塑料(SMC) .基础规范 | Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for specification |
| BS PL 4-2005 | 高强度纤维增强复合物的低压层压用不饱和聚酯树脂的特性.规范 | Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Specification |
| BS PL 5-2005 | 高强度纤维增强复合物的低压层压用不饱和聚酯树脂.试验方法 | Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites - Test methods |
| BS PL 7-2005 | 玻璃纤维增强叠层制品的低压层压用不饱和聚酯树脂.试验方法 | Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates - Test methods |
| BS PL 8-2005 | 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.规范 | Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks - Specification |
| BS PL 9-2005 | 飞行器燃料舱中用作爆炸抑制剂和挡板材料的纤维聚酰胺材料.试验方法 | Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks - Test methods |
| BS QC 720104-1997 | 电子元件的质量评定协调体系.半导体装置.光电子装置.光纤维系统或分系统用带/不带引线的场效应管管脚组件额 | Harmonized system of quality assessment for electronic components - Semiconductor devices - Optoelectronic devices - Blank detail specification for pin-FET modules with/without pigtail, for fibre optic systems or subsystems |
| DD 76-2-1983 | 预制复合结构混凝土管.第2部分:采用切碎的镀锌钢纤维增强混凝土预制管 | Precast concrete pipes of composite construction. Precast concrete pipes strengthened by chopped zinc-coated steel fibres |
| DD ENV 1007-3-1994 | 高技术陶瓷.陶瓷成分.增强的试验方法.第3部分:长纤维直径的测定 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of filament diameter |
| DD ENV 1007-4-1994 | 高技术陶瓷.陶瓷复合材料.增强试验方法.第4部分:周围温度下纤维拉伸性能测定 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of tensile properties of filament at ambient temperature |
| DD ENV 1007-5-1998 | 高技术陶瓷.陶瓷成分.增强的试验方法. 环境温度下多纤维牵引内纤维断裂拉伸强度和拉伸应变分配的测定 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature |
| DD ENV 1094-3-1998 | 绝缘耐火产品.陶瓷纤维产品分类 | Insulating refractory products. Classification of ceramic fibre products |
| DD ENV 1094-7-1994 | 绝缘耐火制品.第7部分:陶瓷纤维制品的试验方法 | Insulating refractory products. Methods of test for ceramic fibre products |
| DD ENV 1170-8-1997 | 预制混凝土产品.玻璃纤维增强水泥的试验方法.耐循环气候环境试验 | Precast concrete products. Test method for glass-fibre reinforced cement. Cyclic weathering type test |
| PD IEC TS 61941-2000 | 光学纤维.单模式光纤的偏振模式色散测量技术 | Optical fibres. Polarization mode dispersion measurement techniques for single-mode optical fibres |
| PD IEC TS 62033-2000 | 光学纤维中衰变的均匀性 | Attenuation uniformity in optical fibres |
| 编号 | 中文名称 | 英文名称 |