| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60317-0-4 AMD 2-2005 | 特种绕组线规范 第0-4部分:一般要求.玻璃纤维绕组浸树脂或浸清漆裸扁铜线或漆包扁铜线.修改件2 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire; Amendment 2 |
| IEC 60317-0-4 Edition 2.1-2000 | 绕组线特殊类型规范.第0-4部分:一般要求.玻璃纤维缠绕的树脂或清漆浸渍的,裸露或瓷漆的矩形铜线 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| IEC 60317-0-4 Edition 2.2-2006 | 特种绕组线规范.第0-4部分:一般要求.玻璃纤维绕组树脂或清漆浸渍裸铜线或漆包扁铜线 | Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| IEC 60317-0-4-1997 | 特种绕组线规范.第0部分:一般要求.第4节:玻璃纤维绕组树脂或清漆浸渍裸铜线或漆包扁铜线 | Specifications for particular types of winding wires - Part 0: General requirements - Section 4: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire |
| IEC 60317-31 AMD 2-2005 | 特种绕组线规范.第31部分:温度指数180、玻璃纤维绕组聚酯或聚酯酰亚胺浸渍的裸或漆包扁铜线.修改件2 | Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180; Amendment 2 |
| IEC 60317-32 AMD 2-2005 | 特种绕组线规范.第32部分:温度指数155、玻璃纤维绕组树脂或清漆浸渍的、裸或漆包扁铜线.修改件2 | Specifications for particular types of winding wires - Part 32: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155; Amendment 2 |
| IEC 60317-33 AMD 2-2005 | 特种绕组线规范.第33部分:温度指数200、玻璃纤维绕组树脂或清漆浸渍的、裸或漆包扁铜线.修改件2 | Specifications for particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200; Amendment 2 |
| IEC 60317-39 AMD 2-2005 | 特种绕组线规范.第39部分:温度指数180、玻璃纤维聚酯或清漆浸渍的裸或漆包扁铜线.修改件2 | Specifications for particular types of winding wires - Part 39: Glass-fibre resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180; Amendment 2 |
| IEC 60317-40 AMD 2-2005 | 特种绕组线规范.第40部分:温度指数200、玻璃纤维编织树脂或清漆浸渍的、裸或漆包扁铜线.修改件2 | Specifications for particular types of winding wires - Part 40: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200; Amendment 2 |
| IEC 60450 Edition 2.1-2007 | 新的和老化的纤维质电绝缘材料平均粘滞聚合度的测量 | Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials |
| IEC 60450-2004 | 新的和老化的纤维素电气绝缘材料的粘均聚合度的测量 | Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials |
| IEC 60454-3-10-1995 | 电工用压敏粘带 第3部分:单项材料规范 活页10:涂橡胶热固性粘合剂的乙酸丁酸纤维素薄膜胶粘带的要求 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specification for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive |
| IEC 60454-3-11-2007 | 电工用压敏粘带.第3部分:单项材料规范.活页11:带玻璃长丝、纤维素皱纹纸、聚酯非织布、环氧树脂和压敏粘合 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 11: Polyester film combinations with glass filament, creped cellulosic paper, polyester non-woven, epoxy and pressure-sensitive adhesive |
| IEC 60454-3-4-2007 | 电工用压敏粘带.第3部分:单项材料规范.活页4:带橡胶热固性粘合剂的纤维素皱纹纸和非皱纹纸 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Cellulose paper, creped and non-creped, with rubber thermosetting adhesive |
| IEC 60454-3-8-2006 | 电工用压敏胶粘带.第3部分:单项材料规范.活页8:涂有基于玻璃纤维、醋酯纤维素或组合有粘胶纤维的压敏胶粘剂 | Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre |
| IEC 60554-1 AMD 1-1983 | 电工用纤维素纸规范 第1部分:定义和一般要求 修改1 | Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and general requirements |
| IEC 60554-1 Erratum 1-1979 | 电工用纤维素纸规范.第1部分:定义和一般要求 | Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and general requirements |
| IEC 60554-1-1977 | 电工用纤维素纸规范 第1部分:定义和一般要求 | Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and general requirements |
| IEC 60554-2-2001 | 电工用纤维素纸 第2部分：试验方法 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| IEC 60554-3-1-1979 | 电工用纤维素纸规范 第3部分:单项材料规范 活页1:通用电工用纸 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 1: General purpose electrical paper |
| IEC 60554-3-2-1983 | 电工用纤维素纸规范 第3部分:单项材料规范 活页2:电容器纸 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 2: Capacitor paper |
| IEC 60554-3-3-1980 | 电工用纤维素纸规范 第3部分:单项材料规范 活页3:皱纹纸 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 3: Crepe paper |
| IEC 60554-3-4-1979 | 电工用纤维素纸规范 第3部分:单项材料规范 活页4:电解电容器纸 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 4: Electrolytic capacitor paper |
| IEC 60554-3-5-1984 | 电工用纤维素纸规范 第3部分:单项材料规范 活页5:特殊用途纸 | Specification for cellulosic papers for electrical purposes. Part 3 : Specifications for individual materials. Sheet 5: Special papers |
| IEC 60684-3-300-2002 | 绝缘软管.第3部分:各种型号软管规范.第300篇:无涂层的玻璃纤维编织软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated |
| IEC 60684-3-343 to 345-2002 | 绝缘软管.第3部分:各种型号软管规范.第343至345篇:无涂层可扩张编织的乙烯三氟氯乙烯纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated |
| IEC 60684-3-400 to 402-2002 | 绝缘软管.第3部分:各种型号软管规范.第400至402篇:硅弹性玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 400 to 402: Glass textile sleeving with silicone elastomer coating |
| IEC 60684-3-406 to 408-2003 | 绝缘软套管.第3部分:各种型号套管的规范要求.第406至408活页:PVC涂覆层的玻璃纤维编织套管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving; Sheets 406 to 408: Glass textile sleeving with PVC coating |
| IEC 60684-3-409-1999 | 绝缘软管 第3部分:各种型号软管的规范 活页409:聚胺酯(PUR)涂覆层的玻璃纤维软管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating |
| IEC 60793-1-20-2001 | 光纤 第1-20部分：测量方法和试验规程 纤维几何结构 | Optical fibres - Part 1-20: Measurement methods and test procedures; Fibre geometry |
| IEC 60793-1-30-2001 | 光纤 第1-30部分：测量方法和试验规程 纤维验证试验 | Optical fibres - Part 1-30: Measurement methods and test procedures; Fibre proof test |
| IEC 60793-1-34-2006 | 光学纤维.第1-34:部分:测量方法和试验程序.纤维卷曲 | Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl |
| IEC 60793-1-41-2003 | 光学纤维.第1-41部分:测量方法和试验程序.频带宽度 | Optical fibres - Part 1-41: Measurement methods and test procedures; Bandwidth |
| IEC 60793-1-49-2006 | 光学纤维.第1-49部分:测量方法和试验程序.差分模延迟 | Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay |
| IEC 60793-1-54-2003 | 光学纤维.第1-54部分:测量方法和试验规程.Υ幅射 | Optical fibres - Part 1-54: Measurement methods and test procedures; Gamma irradiation |
| IEC 60793-2-10-2007 | 光纤.第2-10部分:产品规范.A1类多模纤维用分规范 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| IEC 60793-2-20-2007 | 光纤.第2-20部分:产品规范.A2类多模纤维的分规范 | Optical fibres - Part 2-20: Product specifications - Sectional specification for category A2 multimode fibres |
| IEC 60793-2-30-2007 | 光纤.第2-30部分:产品规范.A3类多模纤维用分规范 | Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres |
| IEC 60793-2-40-2006 | 光学纤维.第2-40部分:产品规范.A4类多模纤维的分规范 | Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4 multimode fibres |
| IEC 60793-2-50-2004 | 光学纤维.第2-50部分:产品规范.B级单模光纤分规范 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| IEC 60794-1-2-2003 | 光学纤维电缆.第1-2部分:总规范.基础光缆试验规程 | Optical fibre cables - Part 1-2: Generic specification; Basic optical cable test procedures |
| IEC 60794-3-10-2002 | 光学纤维电缆.第3-10部分:户外电缆.管道光缆和直埋通信光缆的系列规范 | Optical fibre cables - Part 3-10: Outdoor cables; Family specification for duct and directly buried optical telecommunication cables |
| IEC 60819-1 AMD 1-1996 | 电工用非纤维素纸 第1部分:定义和一般要求 修改1 | Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements; Amendment 1 |
| IEC 60819-1-1995 | 电工用非纤维素纸 第1部分:定义和一般要求 | Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements |
| IEC 60819-2-2001 | 电工用非纤维素纸 第2部分：试验方法 | Non-cellulosic papers for electrical purposes - Part 2: Methods of test |
| IEC 60819-3-1-2001 | 电工用非纤维素纸 第3部分：单项材料规范 活页1：填充玻璃纸 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 1: Filled glass paper |
| IEC 60819-3-2-2001 | 电工用非纤维素纸 第3部分：单项材料规范 活页2：混合无机 有机纸 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Hybrid inorganic-organic paper |
| IEC 60819-3-3-2006 | 电工用非纤维素纸.第3部分:单项材料规范.活页3:非填充聚芳酰胺纸 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers |
| IEC 60819-3-4-2001 | 电工用非纤维素纸 第3部分：单项材料规范 活页4：含有不多于50%云母颗粒的芳族聚酰胺纤维纸 | Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles |
| IEC 60869-1-1999 | 纤维光学衰减器 第1部分:总规范 | Fibre optic attenuators - Part 1: Generic specification |
| IEC 60875-1-2000 | 纤维光学分路器 第1部分:总规范 | Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
| IEC 60876-1-2001 | 纤维光学空间开关 总规范 | Fibre optic spatial switches - Part 1: Generic specification |
| IEC 61067-1-1991 | 玻璃和玻璃聚酯纤维编织带规范 第1部分:定义、分类和一般要求 | Specification for glass and glass polyester fibre woven tapes; part 1: definitions, classification and general requirements |
| IEC 61067-2-1992 | 玻璃和玻璃聚酯纤维编织带规范 第2部分:试验方法 | Specification for glass and glass polyester fibre woven tapes; part 2: methods of test |
| IEC 61067-3-1-1995 | 玻璃和玻璃聚酯纤维编织带 第3部分:单项材料规范 活页1:1、2、3型织带 | Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes |
| IEC 61068-1-1991 | 聚酯纤维机织带规范 第1部分:定义、名称和一般要求 | Specification for polyester fibre woven tapes; part 1: definitions, designation and general requirements |
| IEC 61068-2-1991 | 聚酯纤维编织带规范 第2部分:试验方法 | Specification for polyester fibre woven tapes; part 2: methods of test |
| IEC 61068-3-1 Corrigendum 1-1998 | 聚酯纤维编织带.第3部分:单项材料规范.活页1:常规织机或无梭织机编织的带 | Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms |
| IEC 61068-3-1-1995 | 聚酯纤维编织带 第3部分:单项材料规范 活页1:常规织机或无梭织机编织的带 | Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms |
| IEC 61197-1993 | 绝缘液体 直线火焰蔓延 使用玻璃纤维带的试验方法 | Insulating liquids; linear flame propagation; test method using a glass-fibre tape |
| IEC 61202-1-2000 | 纤维光学隔离器 第1部分:总规范 | Fibre optic isolators - Part 1: Generic specification |
| IEC 61249-2-1-2005 | 印制板和其它互连结构用材料.第2-1部分:包被和非包被增强基材.酚醛纤维素纸增强铜包被经济叠层板 | Materials for printed boards and other interconnecting structures - Part 2-1: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad |
| IEC 61249-2-10-2003 | 印制板和其它互连结构用材料.第2-10部分:包被和非包被增强基材.规定了易燃性的包铜改良或未改良的氰酸酯溴 | Materials for printed boards and other interconnecting structures - Part 2-10: Reinforced base materials clad and unclad; Cyanate ester, brominated epoxide, modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-11-2003 | 印制板和其他互联结构用材料.第2-11部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的聚酰亚胺溴化 | Materials for printed boards and other interconnection structures - Part 2-11: Reinforced base materials, clad and unclad; Polyimide, brominated epoxide modified or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-18-2002 | 印制板和其它互连结构用材料.第2-18部分:包被或非包被增强基材.规定了易燃性的覆铜非编织玻璃纤维增强层压 | Materials for printed boards and other interconnecting structures - Part 2-18: Reinforced base materials, clad and unclad; Polyester non-woven fibreglass reinforced laminated sheet of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-19-2001 | 印制版和其他互连结构件用材料 第2-19部分：包被和非包被增强基底材料 阻燃（垂直燃烧试验）型铜包被的环 | Materials for printed boards and other interconnection structures - Part 2-19: Reinforced base materials, clad and unclad; Epoxide cross-plied linear fibreglass-reinforced laminated sheets of defined flammability (vertical burning test), copper clad |
| IEC 61249-2-2-2005 | 印制板和其它互连结构用材料.第2-2部分:包被和非包被增强基材.酚醛纤维素纸增强铜包被电工叠层板 | Materials for printed boards and other interconnecting structures - Part 2-2: Reinforced base materials, clad and unclad - Phenolic cellulose paper reinforced laminated sheets, high electrical grade, copper-clad |
| IEC 61249-2-21-2003 | 印制板和其他互联结构用材料.第2-21部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的非卤化环氧编 | Materials for printed boards and other interconnection structures - Part 2-21: Reinforced base materials, clad and unclad; Non-halogenated epoxide woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-22-2005 | 印制板和其他互连结构用材料.第2-22部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的改良的非卤化 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-23-2005 | 印制板和其他互连结构用材料.第2-23部分:包被和非包被增强基材.铜包被的经济级非卤化酚醛纤维素纸增强层压 | Materials for printed boards and other interconnecting structures - Part 2-23: Reinforced base materials, clad and unclad - Non-halogenated phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad |
| IEC 61249-2-26-2005 | 印制板和其他互连结构用材料.第2-26部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的非卤化环氧非 | Materials for printed boards and other interconnecting structures - Part 2-26: Reinforced base materials clad and unclad - Non-halogenated epoxide non-woven/woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-4-2001 | 印制版和其他互连结构件用材料 第2-4部分：包被和非包被增强基材 阻燃（垂直燃烧试验）型铜包被的聚酯非 | Materials for printed boards and other interconnection structures - Part 2-4: Reinforced base materials, clad and unclad; Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-5-2003 | 印制板和其他互联结构用材料.第2-5部分:包被和非包被增强基材.阻燃型(垂直燃烧试验)铜包被的溴化环氧纤维素 | Materials for printed boards and other interconnection structures - Part 2-5: Reinforced base materials, clad and unclad; Brominated epoxide cellulose paper reinforced core/woven E-glass reinforced surfaces laminated sheets of defined flammability (vertical burning test) copper-clad |
| IEC 61249-2-8-2003 | 印制板和其它互连结构用材料.第2-8部分:包被和非包被增强基材.规定了易燃性的包铜改良溴化环氧编织玻璃纤维 | Materials for printed boards and other interconnecting structures - Part 2-8: Reinforced base materials clad and unclad; Modified brominated epoxide woven fiberglass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-2-9-2003 | 印制板和其它互连结构用材料.第2-9部分:包被和非包被增强基材.规定了易燃性的包铜二顺丁烯二酰亚胺/三嗪改 | Materials for printed boards and other interconnecting structures - Part 2-9: Reinforced base materials clad and unclad; Bismaleimide/triazine modified epoxide or unmodified, woven E-glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 61249-4-11-2005 | 印制板和其他互连结构用材料.第4-11部分:非包被预浸料的分规范集.阻燃型非卤化环氧编织E型玻璃纤维预浸料坯 | Materials for printed boards and other interconnecting structures - Part 4-11: Sectional specification set for prepreg materials, unclad - Non-halogenated epoxide woven E-glass prepreg of defined flammability |
| IEC 61249-4-12-2005 | 印制板和其他互连结构用材料.第4-12部分:非包被预浸料的分规范集.阻燃型非卤化多功能环氧编织E型玻璃纤维预 | Materials for printed boards and other interconnecting structures - Part 4-12: Sectional specification set for prepreg materials, unclad - Non-halogenated multifunctional epoxide woven E-glass prepreg of defined flammability |
| IEC 61249-4-2-2005 | 印制板和其他互连结构用材料.第4-2部分:非包被预浸料的分规范集.阻燃型多功能环氧编织E型玻璃纤维预浸料坯 | Materials for printed boards and other interconnecting structures - Part 4-2: Sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
| IEC 61249-4-5-2005 | 印制板和其他互连结构用材料.第4-5部分:非包被预浸料的分规范集.阻燃型改良和未改良的聚酰亚胺编织E型玻璃 | Materials for printed boards and other interconnecting structures - Part 4-5: Sectional specification for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability |
| IEC 61269-1-1-1994 | 纤维光学端接装置 第1-1部分:空白详细规范 | Fibre optic terminus sets - Part 1-1: Blank detail specification |
| IEC 61274-1-1-2006 | 纤维光学适配器.第1-1部分:空白详细规范 | Adaptors for fibre optic connectors - Part 1-1: Blank detail specification |
| IEC 61274-1-2007 | 纤维光学转接器.第1部分:总规范 | Adaptors for fibre optic connectors - Part 1: Generic specification |
| IEC 61280-1-1-1998 | 纤维光学通信子系统基本试验程序 第1-1部分:一般通信子系统试验程序 单模光缆发射器光输出功率测量 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| IEC 61280-1-3-1998 | 纤维光学通信子系统基本试验程序 第1-3部分:一般通信子系统试验程序 中心波长和谱宽测量 | Fibre optic communication subsystem basic test procedures - Part 1-3: Test procedures for general communication subsystems - Central wavelength and spectral width measurement |
| IEC 61280-1-4-2003 | 纤维光学通信子系统试验程序.第1-4部分:一般通信子系统.多模纤维激光发射机用二维近场数据的采集和换算 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems; Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters |
| IEC 61280-2-1-1998 | 纤维光学通信子系统基本试验程序 第2-1部分:数字系统试验程序 接收器灵敏度和过载测量 | Fibre optic communication subsystem basic test procedures - Part 2-1: Test procedures for digital systems - Receiver sensitivity and overload measurement |
| IEC 61280-2-10-2005 | 纤维光学通信子系统试验程序.第2-10部分:数字系统.激光发射器的时间分辨线性调频脉冲和α指数测量 | Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| IEC 61280-2-2-2005 | 纤维光学通信子系统试验程序.第2-2部分:数字系统.光眼图、波形和消光比的测量 | Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform, and extinction ratio measurement |
| IEC 61280-2-4-1998 | 纤维光学通信子系统基本试验程序 第2-4部分:数字系统试验程序 比特率容差测量 | Fibre optic communication subsystem basic test procedures - Part 2-4: Test procedures for digital systems - Bit-rate tolerance measurement |
| IEC 61280-2-5-1998 | 纤维光学通信子系统基本试验程序 第2-5部分:数字系统试验程序 抖动转移功能测量 | Fibre optic communication subsystem basic test procedures - Part 2-5: Test procedures for digital systems - Jitter transfer function measurement |
| IEC 61280-4-1-2003 | 纤维光学通信子系统试验程序.第4-1部分:光缆设备及链接.多模光缆设备的衰减测量 | Fibre-optic communication subsystem test procedures - Part 4-1: Cable plant and links; Multimode fibre-optic cable plant attenuation measurement |
| IEC 61280-4-2-1999 | 纤维光学通信子系统基本试验程序 第4-2部分:光缆设施 单模光缆系统设施衰减 | Fibre optic communication subsystem basic test procedures - Part 4-2: Fibre optic cable plant - Single-mode fibre optic cable plant attenuation |
| IEC 61280-4-4-2006 | 纤维光学通信子系统基本试验程序.第4-4部分:已安装链路的偏振模式色散测量 | Fibre optic communication subsystem test procedures - Part 4-4: Cable plants and links - Polarization mode dispersion measurement for installed links |
| IEC 61281-1-1999 | 纤维光学通信子系统 第1部分:总规范 | Fibre optic communication subsystems - Part 1: Generic specification |
| IEC 61290-3-2000 | 光学纤维放大器 基础规范 第3部分:噪音数字参数的的测量方法 | Optical fibre amplifiers - Basic specification - Part 3: Test methods for noise figure parameters |
| IEC 61290-6-1-1998 | 光学纤维放大器 基础规范 第6-1部分:泵浦泄漏参数的测量方法 光解复用器 | Optical fibre amplifiers - Basic specification - Part 6-1: Test methods for pump leakage parameters - Optical demultiplexer |
| IEC 61300-1-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第1部分:总则和指南 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance |
| IEC 61300-2-1 Corrigendum 1-2004 | 纤维光学互联器件和无源元件.基本试验和测量程序.第2-1部分:试验.振动(正弦).勘误1 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal); Corrigendum 1 |
| IEC 61300-2-1-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-1部分:试验.振动(正弦) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) |
| IEC 61300-2-12-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-12部分:试验.冲击 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact |
| IEC 61300-2-14-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-14部分:试验.光学功率控制和损坏阈特性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization |
| IEC 61300-2-15-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-15部分:试验 锁紧机构的扭转强度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism |
| IEC 61300-2-18-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-18部分:试验.干热.高温耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance |
| IEC 61300-2-19-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-19部分:试验.湿热(稳态) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) |
| IEC 61300-2-2-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-2部分:试验.配接耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-2: Tests - Mating durability |
| IEC 61300-2-21-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-21部分:试验 温度 湿度组合循环试验 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature-humidity cyclic test |
| IEC 61300-2-22-2007 | 纤维光学互联器件和无源元件.基本试验和测量程序.第2-22部分:试验.温度变化 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature |
| IEC 61300-2-23-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-23部分:试验 非加压式纤维光学器件外壳密封 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for not-pressurized closures of fibre optic devices |
| IEC 61300-2-24-1999 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-24部分:试验 陶瓷准直套管筛选(施加应力) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application |
| IEC 61300-2-25-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-25部分:试验 外壳密封耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-25: Tests - Sealing endurance for closures |
| IEC 61300-2-27-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-27部分:试验 灰尘 层流 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow |
| IEC 61300-2-28-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-28部分:试验 工业大气(二氧化硫) | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide) |
| IEC 61300-2-29-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-29部分:试验 低气压 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure |
| IEC 61300-2-30-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-30部分:试验 太阳辐照 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-30: Tests - Solar radiation |
| IEC 61300-2-31-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-31部分:试验 核辐照 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-31: Tests - Nuclear radiation |
| IEC 61300-2-32-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-32部分:试验 水蒸气渗透 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-32: Tests - Water vapour permeation |
| IEC 61300-2-33-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-33部分:试验.外壳组装和拆卸 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of closures |
| IEC 61300-2-34-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-34部分:试验 耐溶剂和污染液体 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids |
| IEC 61300-2-37-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-37部分:试验.光纤包闭用光缆弯形外壳 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures |
| IEC 61300-2-38-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-38部分:试验.加压纤维光学器件外壳密封 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures |
| IEC 61300-2-4-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-4部分:试验 光纤/光缆保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention |
| IEC 61300-2-40-2000 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-40部分:试验 单模调整式有角度光纤光缆连接器衰减的筛 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-40: Tests; Screen testing of attenuation of single-mode tuned angled optical connectors |
| IEC 61300-2-41-1998 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-41部分:试验 单模调整式无角度光纤连接器衰减的筛选 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-41: Tests - Screen testing of attenuation of single-mode tuned non-angled optical fibre connectors |
| IEC 61300-2-42-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-42部分:试验.连接器静态侧向负荷 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors |
| IEC 61300-2-43-1999 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-43部分:试验 单模PC光纤连接器回波损耗的筛选 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single mode PC optical fibre connectors |
| IEC 61300-2-44-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-44部分:试验.纤维光学器件的应力消除的挠曲 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices |
| IEC 61300-2-45-1999 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-45部分:试验 浸水耐久性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-45: Tests - Durability test by water immersion |
| IEC 61300-2-46-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-46部分:试验.湿气热循环 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat, cyclic |
| IEC 61300-2-47-2006 | 纤维光学互连器件和无源元件.基本试验测量程序.第2-47部分:试验.热冲击 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks |
| IEC 61300-2-48-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-48部分:试验.温度-湿度循环 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests; Temperature-humidity cycling |
| IEC 61300-2-49-2007 | 纤维光学互连器件和无源元件.基础试验和测量程序.第2-49部分:试验.连接器安装试验 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-49: Tests - Connector installation test |
| IEC 61300-2-5-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第2-5部分:试验.扭转 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion/Twist |
| IEC 61300-2-50-2007 | 纤维光学互连器件和无源元件.基础试验和测量程序.第2-50部分:试验.带静载荷的纤维光学连接器检验试验.单模 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode |
| IEC 61300-2-51-2007 | 纤维光学互连器件和无源元件.基础试验和测量程序.第2-51部分:试验.带外加拉伸负载的传输用纤维光学连接器试 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode and multimode |
| IEC 61300-2-6-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-6部分:试验 锁紧机构抗拉强度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism |
| IEC 61300-2-9-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第2-9部分:试验 冲击 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock |
| IEC 61300-3-1-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-1部分:检查和测量.外观检查 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination |
| IEC 61300-3-10-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-10部分:检验和测量.量规保持力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force |
| IEC 61300-3-11-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-11部分:检查和测量 连接和分离力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-11: Examinations and measurements - Engagement and separation forces |
| IEC 61300-3-12-1997 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-12部分:检验和测量 单模纤维光学器件衰减偏振函数:矩 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-12: Examinations and measurements - Polarization dependence of attenuation of a single-mode fibre optic component: Matrix calculation method |
| IEC 61300-3-13-1995 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-13部分:检查和测量 纤维光学开关控制稳定性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch |
| IEC 61300-3-14-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-14部分:检查和测量.可变光衰减器衰减度的准确性和重复 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator |
| IEC 61300-3-15-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-15部分:检验和测量.凸形抛光套管端面圆顶偏心度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface |
| IEC 61300-3-16-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-16部分:检查和测量.套管球形抛光端面的曲率半径 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules |
| IEC 61300-3-17-1999 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-17部分:检查和测量 套管角度抛光端面的曲率角度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules |
| IEC 61300-3-18-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-18部分:检验和测量.角端面连接器的键控精度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-18: Examinations and measurements - Keying accuracy of an angled endface connector |
| IEC 61300-3-19-1997 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-19部分:检验和测量 单模纤维光学器件回波损耗偏振依赖 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-19: Examinations and measurements - Polarization dependence of return loss of a single-mode fibre optic component |
| IEC 61300-3-2-1999 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-2部分:检查和测量 单模纤维光学器件衰减偏振函数 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependence of attenuation in a single-mode fibre optic device |
| IEC 61300-3-20-2001 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-20部分：检查和测量 纤维光学分支器件的定向性 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements; Directivity of fibre optic branching devices |
| IEC 61300-3-21-1998 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-21部分:检查和测量 切换时间和回跳时间 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements; switching time and bounce time |
| IEC 61300-3-22-1997 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-22部分:检查和测量 套管压缩力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force |
| IEC 61300-3-23-1998 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-23部分:检查和测量 光纤与套管端面间的相对位置 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements; fibre position relative to ferrule endface |
| IEC 61300-3-24-2006 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-24部分:检查和测量.偏振保持光纤用连接器的键入准确度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre |
| IEC 61300-3-25-1997 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-25部分:检查和测量 套管和装有光纤套管的同心度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the ferrules and ferrules with fibre installed |
| IEC 61300-3-27-1997 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-27部分:检查和测量 多芯连接器插头的孔位测量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-27: Examinations and measurements - Measurement method for the hole location of a multiway connector plug |
| IEC 61300-3-29-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-29部分:检查和测量.表征DWDM元件的光谱传输功能振幅的 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components |
| IEC 61300-3-3-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-3部分:检查和测量.衰减和回波损耗中变化的自动监控 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss |
| IEC 61300-3-30-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-30部分:检查和测量.单套管多纤连接器上的光纤位置和抛 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors |
| IEC 61300-3-31-2003 | 光纤互连装置和无源部件.基本试验和测量程序.第3-34部分:检验和测量.纤维光学源的耦合功率比测量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources |
| IEC 61300-3-33-1999 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-33部分:检查和测量 套管分离力 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Ferrule withdrawal force |
| IEC 61300-3-34-2001 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-34部分：检查和测量 随机插配连接器的衰减 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements; Attenuation of random mated connectors |
| IEC 61300-3-36-2000 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-36部分:检查和测量 光纤连接器套管内径和外径测量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre optic connector ferrules |
| IEC 61300-3-37-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-37部分:检查和测量.光学纤维角度抛光端面的曲率角度 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres |
| IEC 61300-3-39-1997 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-39部分:检查和测量 PC光连接器基准插头的选择 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - PC optical connector reference plug selection |
| IEC 61300-3-4-2001 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-4部分：检查和测量 衰减 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements; Attenuation |
| IEC 61300-3-40-1998 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-40部分:检查和测量 带偏振保持尾纤连接器消光比 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-40: Examinations and measurements - Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector |
| IEC 61300-3-5-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-5部分:检查和测量.波长衰减函数 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-5: Examinations and measurements - Wavelength dependence of attenuation |
| IEC 61300-3-6-2005 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-3部分:检查和测量.回波损耗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss |
| IEC 61300-3-7-2004 | 纤维光学互连器件和无源元件.基本试验和测量程序.第3-7部分:检查和测量.波长衰减函数和回波损耗 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss |
| IEC 61300-3-9-1997 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-9部分:检查和测量 远端串音 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-9: Examinations and measurements - Far-end crosstalk |
| IEC 61314-1-1-2006 | 纤维光学扇形输出器.第1-1部分:空白详细规范 | Fibre optic fan-outs - Part 1-1: Blank detail specification |
| IEC 61314-1-2005 | 纤维光学扇形输出器.第1部分:总规范 | Fibre optic fan-outs - Part 1: Generic specification |
| IEC 61315-2005 | 纤维光学功率计校准 | Calibration of fibre optic power meters |
| IEC 61744-2005 | 纤维光学色散试验装置的校准 | Calibration of fibre optic chromatic dispersion test sets |
| IEC 61745-1998 | 光学纤维几何参数测量装置校准端面影像分析程序 | End-face image analysis procedure for the calibration of optical fibre geometry test sets |
| IEC 61753-021-2-2002 | 纤维光学互连器件和无源元件性能标准.第021-2部分:C类单模光纤连接器终端.控制环境 | Fibre optic interconnecting devices and passive component performance standard - Part 021-2: Fibre optic connectors terminated on single-mode fibre for category C; Controlled environment |
| IEC 61753-021-6-2007 | 纤维光学互连装置和无源元件性能标准.第021-6部分:O类B/2级单模纤维光学连接器.非控制环境 | Fibre optic interconnecting devices and passive components performance standard - Part 021-6: Grade B/2 single mode fibre optic connectors for category O - Uncontrolled environment |
| IEC 61753-051-3 Corrigendum 1-2004 | 勘误1.纤维光学互连器件和无源元件性能标准.第051-3部分:U类单模纤维插入式固定衰减器.非受控环境 | Corrigendum 1 - Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for Category U - Uncontrolled environment |
| IEC 61753-051-3-2001 | 纤维光学互连器件和无源元件性能标准 第051-3部分：U类单模纤维插入式固定衰减器 非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 051-3: Single-mode fibre, plug-style fixed attenuators for category U; Uncontrolled environment |
| IEC 61753-052-3-2001 | 纤维光学互连器件和无源元件性能标准.第052-3部分:U类单模光纤带尾固定衰减器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 052-3: Single-mode fibre pigtailed-style fixed attenuators for category U; Uncontrolled environment |
| IEC 61753-053-3-2004 | 纤维光学互连器件和无源元件性能标准.第053-3部分:U类连续可变衰减器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment |
| IEC 61753-061-3-2004 | 纤维光学互连器件和无源元件性能标准.第061-3部分:U类单模纤维光学有抽头的隔离器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 061-3: Single mode fibre optic pigtailed style isolators for category U - Uncontrolled environment |
| IEC 61753-083-2-2007 | 纤维光学互连器件和无源元件性能标准.第083-2部分:C类用非连接器的单模光纤C波段/L波段WDM设备.受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment |
| IEC 61753-084-2-2007 | 纤维光学互连器件和无源元件性能标准.第084-2部分:C类用非连接器的单模980/1550nm WWDM设备.受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment |
| IEC 61753-091-3-2004 | 纤维光学互连器件和无源元件性能标准.第091-3部分:U类单模纤维光学有抽头的循环器.非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single mode fibre optic pigtailed style circulators for category U - Uncontrolled environment |
| IEC 61753-1-2007 | 纤维光学互连器件和无源元件性能标准.第1部分:性能标准的总则和指南 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| IEC 61753-101-2-2006 | 纤维光学互连器件和无源元件性能标准.第101-2部分:受控环境的C类光纤管理系统 | Fibre optic interconnecting devices and passive components performance standard - Part 101-2: Fibre management systems for Category C - Controlled environment |
| IEC 61753-101-3-2006 | 纤维光学互连器件和无源元件性能标准.第101-3部分:不受控环境的U类光纤管理系统 | Fibre optic interconnecting devices and passive components performance standard - Part 101-3: Fibre management systems for category U - Uncontrolled environment |
| IEC 61753-2-1-2000 | 纤维光学互连器件和无源元件性能标准 第2-1部分:U类单模端接光纤连接器 非受控环境 | Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment |
| IEC 61753-2-3-2001 | 纤维光学互连器件和无源元件性能标准 第2-3部分：U类不做或连接器的单模1xN及2xN非波长可选分支器件 非受 | Fibre optic interconnecting devices and passive components performance standard - Part 2-3: Non-connectorised single-mode 1×N and 2×N non-wavelength-selective branching devices for category U; Uncontrolled environment |
| IEC 61754-1-1996 | 纤维光学连接器接口 第1部分:总则和指南 | Fibre optic connector interfaces - Part 1: General and guidance |
| IEC 61754-10-2005 | 纤维光学连接器接口.第10部分:微型MPO型连接器门类 | Fibre optic connector interfaces - Part 10: Type Mini-MPO connector family |
| IEC 61754-12-1999 | 纤维光学连接器接口 第12部分:FS 型连接器门类 | Fibre optic connector interfaces - Part 12: Type FS connector family |
| IEC 61754-13-2006 | 纤维光学连接器接口.第13部分:FC-PC型连接器 | Fibre optic connector interfaces - Part 13: Type FC-PC connector |
| IEC 61754-15-1999 | 纤维光学连接器接口 第15部分:LSH型连接器门类 | Fibre optic connector interfaces - Part 15: Type LSH connector family |
| IEC 61754-16-1999 | 纤维光学连接器接口 第16部分:PN型连接器门类 | Fibre optic connector interfaces - Part 16: Type PN connector family |
| IEC 61754-18-2001 | 纤维光学连接器接口 第18部分：MT-RJ型连接器门类 | Fibre optic connector interfaces - Part 18: Type MT-RJ connector family |
| IEC 61754-19-2001 | 纤维光学连接器的接口 第19部分：SG型连接器门类 | Fibre optic connector interfaces - Part 19: Type SG connector family |
| IEC 61754-2-1996 | 纤维光学连接器接口 第2部分:BFOC/2.5 型连接器门类 | Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family |
| IEC 61754-20-2002 | 纤维光学连接器接口.第20部分:LC型连接器门类 | Fibre optic connector interfaces - Part 20: Type LC connector family |
| IEC 61754-21-2005 | 纤维光学连接器接口.第21部分:塑料光纤的SMI型连接器系列 | Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre |
| IEC 61754-22-2005 | 纤维光学连接器接口.第22部分:F-SMA型连接器门类 | Fibre optic connector interfaces - Part 22: Type F-SMA connector family |
| IEC 61754-23-2005 | 纤维光学连接器接口.第23部分:LX.5型连接器系列 | Fibre optic connector interfaces - Part 23: Type LX.5 connector family |
| IEC 61754-3-1996 | 纤维光学连接器接口 第3部分:LSA型连接器门类 | Fibre optic connector interfaces - Part 3: Type LSA connector family |
| IEC 61754-4 AMD 1-1999 | 纤维光学连接器接口 第4部分:SC型连接器门类 修改1 | Fibre optic connector interfaces - Part 4: Type SC connector family; Amendment 1 |
| IEC 61754-4 AMD 2-2001 | 纤维光学连接器接口 第4部分:SC型连接器门类 修改2 | Fibre optic connector interfaces - Part 4: Type SC connector family; Amendment 2 |
| IEC 61754-4-1-2003 | 纤维光学连接器接口.第4-1部分:SC型连接器系列.简化SC-PC连接器接口 | Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptable SC-PC connector interfaces |
| IEC 61754-4-1997 | 纤维光学连接器接口 第4部分:SC型连接器门类 | Fibre optic connector interfaces - Part 4: Type SC connector family |
| IEC 61754-5-2005 | 纤维光学连接器接口.第5部分:MT型连接器门类 | Fibre optic connector interfaces - Part 5: Type MT connector family |
| IEC 61754-6 Corrigendum 1-1997 | 纤维光学连接器接口.第6部分:MU型连接器门类 | Fibre optic connector interfaces - Part 6: Type MU connector family |
| IEC 61754-6-2005 | 纤维光学连接器接口.第6部分:MU 型连接器门类 | Fibre optic connector interfaces - Part 6: Type MU connector family |
| IEC 61754-7-2004 | 纤维光学连接器接口.第7部分:MPO型连接器门类 | Fibre optic connector interfaces - Part 7: Type MPO connector family |
| IEC 61754-8-1996 | 纤维光学连接器接口 第8部分:CF08 型连接器门类 | Fibre optic connector interfaces - Part 8: CF08 connector family |
| IEC 61754-9-1996 | 纤维光学连接器接口 第9部分:DS 型连接器门类 | Fibre optic connector interfaces - Part 9: Type DS connector family |
| IEC 61755-1-2005 | 纤维光学连接器的接口.第1部分:单一模式非散射移位纤维的光学接口.总则和指南 | Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance |
| IEC 61755-2-1-2006 | 纤维光学连接器的接口.第2-1部分:标准非物理角接触单模光纤的光学接口 | Fibre optic connector optical interfaces - Part 2-1: Optical interface standard single mode non-angled physically contacting fibres |
| IEC 61755-2-2-2006 | 纤维光学连接器光学接口.第2-2部分:标准物理角连接单模光纤的光学接口 | Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres |
| IEC 61755-3-1-2006 | 纤维光学连接器的接口.第3-1部分:2.5mm和1.25mm直径的圆柱形全氧化锆环形单模光纤的光学接口 | Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical zirconia PC ferrule, single mode fibres |
| IEC 61755-3-2-2006 | 纤维光学连接器的接口.第3-1部分:2.5mm和1.25mm直径的圆柱形全氧化锆环形单模光纤的光学接口 | Fibre optic connector optical interfaces - Part 3-2: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres |
| IEC 61755-3-5-2006 | 纤维光学连接器的光接口.第3-5部分:光接口.以铜镍合金作为纤维环绕材料、单模纤维的直径2.5mm和1.25mm圆柱 | Fibre optic connector optical interfaces - Part 3-5: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| IEC 61755-3-6-2006 | 纤维光学连接器光接口.第3-6部分:光接口.以铜镍合金作为纤维环绕材料、单模纤维的直径2.5mm和1.25mm圆柱形8 | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| IEC 61756-1-2006 | 光纤互连设备和无源元器件.纤维管理系统的接口标准.第1部分:总则和指南 | Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance |
| IEC 61757-1-1998 | 纤维光学传感器 第1部分:总规范 | Fibre optic sensors - Part 1: Generic specification |
| IEC 61977-2001 | 纤维光学滤光器 总规范 | Fibre optic filters - Generic specification |
| IEC 61978-1-2000 | 纤维光学无源分散补偿器.第1部分:总规范 | Fibre optic passive dispersion compensators - Part 1: Generic specification |
| IEC 62005-1-2001 | 纤维光学互连器件和无源元件的可靠性 第1部分：引导指南及定义 | Reliability of fibre optic interconnecting devices and passive components - Part 1: Introductory guide and definitions |
| IEC 62005-2-2001 | 纤维光学互连器件和无源元件的可靠性 第2部分：基于加速老化试验的可靠性定量评估 温度和湿度：稳态 | Reliability of fibre optic interconnecting devices and passive components - Part 2: Quantitative assessment of reliability based on accelerated ageing tests; Temperature and humidity; Steady state |
| IEC 62005-3-2001 | 纤维光学互连器件和无源元件的可靠性 第3部分：评估无源元件失效模式和失效机理的相关试验 | Reliability of fibre optic interconnecting devices and passive components - Part 3: Relevant tests for evaluating failure modes and failure mechanisms for passive components |
| IEC 62005-4-1999 | 纤维光学互连器件和无源光学元件可靠性 第4部分:产品筛选 | Reliability of fibre optic interconnecting devices and passive optical components - Part 4: Product screening |
| IEC 62005-7-2004 | 纤维光学互连器件和无源光学元件的可靠性.第7部分:寿命应力模拟试验 | Reliability of fibre optic interconnecting devices and passive optical components - Part 7: Life stress modeling |
| IEC 62005-9-2-2007 | 纤维光学互连器件和无源光学元件可靠性.第9-2部分:单模纤维光学连接器装置的可靠性鉴定.单模 | Reliability of fibre optic interconnecting devices and passive optical components - Part 9-2: Reliability qualification for single fibre optic connector sets - Single mode |
| IEC 62007-1-1999 | 纤维光学系统用半导体光电子器件 第1部分:基本额定值和特性 | Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Essential ratings and characteristics |
| IEC 62007-2-1999 | 纤维光学系统用半导体光电器件 第2部分:测量方法 | Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods |
| IEC 62077-2001 | 纤维光学环行器 总规范 | Fibre optic circulators - Generic specification |
| IEC 62099-2001 | 纤维光学波长开关 总规范 | Fibre optic wavelength switches - Generic specification |
| IEC 62148-12-2004 | 纤维光学有源元件和器件.包装和接口标准.第12部分:带同轴RF连接器的激光传输器 | Fibre optic active components and devices - Package and interface standards - Part 12: Laser transmitters with a coaxial RF connector |
| IEC 62148-2 Corrigendum 1-2003 | 纤维光学有源元件和器件.包装和接口标准.第2部分:SFF MT-RJ 10针无线电收发信机 | Fibre optic active components and devices - Package interface standards - Part 2: SFF MT-RJ 10-pin transceivers |
| IEC 62148-6-2003 | 纤维光学有源元件和器件.包装和接口标准.第6部分:ATM-PON无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers |
| IEC 62148-9 Corrigendum 1-2003 | 纤维光学有源元件和器件.包装和接口标准.第9部分:SFF MU双工10针无线电收发信机 | Fibre optic active components and devices - Package and interface standards - Part 9: SFF MU duplex 10-pin transceivers |
| IEC 62149-1 Corrigendum 1-2004 | 纤维光学有源元件和器件.性能标准.第1部分:总则和指南.勘误1 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance; Corrigendum 1 |
| IEC 62149-1-2004 | 纤维光学有源元件和器件.性能标准.第1部分:总则和指南 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance |
| IEC 62149-3-2004 | 纤维光学有源元件和器件.性能标准.第3部分:2.5Gbit/s调制器-集成激光二极管发射机 | Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters |
| IEC 62149-4 Corrigendum 1-2003 | 纤维光学有源元件和器件.性能标准.第4部分:千兆比特以太网用1300nm纤维光学无线电收发信机 | Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application |
| IEC 62149-4-2003 | 纤维光学有源元件和器件.性能标准.第4部分:千兆比特以太网用1300nm纤维光学无线电收发两用机 | Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application |
| IEC 62150-1-2005 | 纤维光学有源元件和器件.试验和测量程序.第1部分:总则和指南 | Fibre optic active components and devices - Test and measurement procedures - Part 1: General and guidance |
| IEC 62150-2-2004 | 纤维光学有源元件和器件.试验和测量规程.第2部分: ATM-POM无线电收发信机 | Fibre optic active components and devices - Test and measurement procedures - Part 2: ATM-PON transceivers |
| IEC/PAS 61300-3-43-2006 | 纤维光学互连器件和无源元件.基本试验和测量规程.第3-43部分:检验和测量.纤维光学源的模式转换功能测量 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources |
| IEC/PAS 61753-081-2-2005 | 纤维光学互连器件和无源元件性能标准.第081-2部分:C类非连接式单模光纤中型1 Pt N DWDM设备.控制环境 | Fibre optic interconnecting devices and passive components performance standard - Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 × N DWDM devices for category C - Controlled environments |
| IEC/PAS 61755-3-31-2007 | 纤维光学连接器光学接口.第3-31部分:光学接口.8度角PC端面PPS矩形金属环单模纤维 | Fibre optic connector optical interfaces - Part 3-31: Optical interface - 8 degrees angled PC end-face PPS rectangular ferrule, single mode fibre |
| IEC/PAS 61755-3-32-2007 | 纤维光学连接器的光学接口.第3-32部分:光学接口.单模纤维、矩形8度角PC端面热固性金属套圈 | Fibre optic connector optical interfaces - Part 3-32: Optical interface - 8 degrees angled-PC end-face thermoset rectangular ferrule, single mode fibres |
| IEC/PAS 62074-1-2007 | 纤维光学WDM装置.第1部分:一般规范 | Fibre optic WDM devices - Part 1: Generic specification |
| IEC/TR 61282-1-2000 | 纤维光学通信系统的设计指南 第1部分:单模数字系统和模拟系统 | Fibre optic communication system design guides - Part 1: Single-mode digital and analogue systems |
| IEC/TR 61282-2-2003 | 纤维光学通信系统设计指南.第2部分:多模和单模Gbit/s设备.吉位以太网模型 | Fibre optic communication system design guides - Part 2: Multimode and single-mode Gbit/s applications; Gigabit ethernet model |
| IEC/TR 61282-3-2006 | 纤维光学通信系统设计指南.第3部分:偏振模散射计算 | Fibre optic communication system design guides - Part 3: Calculation of polarisation mode dispersion |
| IEC/TR 61282-4-2003 | 纤维光学通信系统设计指南.第4部分:非线性效应的调节和利用 | Fibre optic communication system design guides - Part 4: Accomodation and utilization of non-linear effects |
| IEC/TR 61282-6-2003 | 纤维光学通信系统的设计指南.第6部分:并行光学互连系统的非对称设计 | Fibre optic communication system design guides - Part 6: Skew design in parallel optical interconnection systems |
| IEC/TR 61282-7-2003 | 纤维光学通信系统的设计指南.第7部分:颜色色散的统计计算 | Fibre optic communication system design guides - Part 7: Statistical calculation of chromatic dispersion |
| IEC/TR 61282-8-2006 | 纤维光学通信系统设计指南.第8部分:根据测出的时间变化啁啾数据计算色散罚值 | Fibre optic communication system design guides - Part 8: Calculating dispersion penalty from measured time-resolved chirp data |
| IEC/TR 61282-9-2006 | 纤维光学通信系统设计指南.第9部分:偏振模散射计量和理论 | Fibre optic communication system design guides - Part 9: Guidance on polarisation mode dispersion measurements and theory |
| IEC/TR 61292-1-1998 | 纤维光学 放大器元件参数 | Fibre optics - Parameters of amplifier components |
| IEC/TR 62283-2003 | 核辐射.纤维光学指南 | Nuclear radiation - Fibre optic guidance |
| IEC/TR 62349-2005 | 光学纤维的偏振串音测试指南 | Guidance for polarization crosstalk measurement of optical fibre |
| IEC/TR3 61930-1998 | 纤维光学图形符号 | Fibre optic graphical symbology |
| IEC/TR3 61931-1998 | 纤维光学 术语 | Fibre optic - Terminology |
| IEC/TS 62033-2000 | 光学纤维衰减均匀性 | Attenuation uniformity in optical fibres |
| ISO 10119-2002 | 碳纤维密度的测定 | Carbon fibre - Determination of density |
| ISO 10306-1993 | 纺织品 棉纤维 成熟度的气流法评定 | Textiles; cotton fibres; evaluation of maturity by the air flow method |
| ISO 10312-1995 | 环境空气 石棉纤维的测定 直接传递电子显微镜法 | Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method |
| ISO 10350-2-2001 | 塑料 可比单点数据的采集和表示 第2部分：长纤维增强塑料 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics |
| ISO 10352-1997 | 纤维增强塑料 模塑料和预浸料 单位面积质量的测定 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area |
| ISO 10397-1993 | 固定源排放 石棉厂排放物的测定 纤维计数测量法 | Stationary source emissions; determination of asbestos plant emissions; method by fibre count measurement |
| ISO 10466-1997 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 耐初始环状变形可能性试验方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection |
| ISO 105-F07-2001 | 纺织品 色牢度试验 第F07部分：再生醋酸纤维贴衬织物规范 | Textiles - Tests for colour fastness - Part F07: Specification for secondary acetate adjacent fabric |
| ISO 105-F10-1989 | 纺织品 色牢度试验 第F10部分:贴衬织物规范:多纤维 | Textiles; tests for colour fastness; part F10: specification for adjacent fabric: multifibre |
| ISO 105-Z03-1996 | 纺织品 色牢度试验 第Z03部分:聚丙烯腈纤维用碱性染料的互溶性 | Textiles - Tests for colour fastness - Part Z03: Intercompatibility of basic dyes for acrylic fibres |
| ISO 10548-2002 | 碳纤维.尺寸的测定 | Carbon fibre - Determination of size content |
| ISO 1061-1990 | 塑料 未增塑的乙酸纤维素 游离酸度的测定 | Plastics; unplasticized cellulose acetate; determination of free acidity |
| ISO 10618-2004 | 碳纤维.树脂浸渍纱拉伸性能的测定 | Carbon fibre - Determination of tensile properties of resin-impregnated yarn |
| ISO 10635-1999 | 耐火制品 陶瓷纤维制品的试验方法 | Refractory products - Methods of test for ceramic fibre products |
| ISO 10928-1997 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 回归分析及其使用方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use |
| ISO 10952-1999 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 在变形条件下断面内部耐化学腐蚀性的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition |
| ISO 11119-3-2002 | 混合结构气瓶.规范和试验方法.第3部分:无负载共用金属或非金属衬里的全缠绕纤维增强混合气瓶 | Gas cylinders of composite construction - Specification and test methods - Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners |
| ISO 1130-1975 | 纺织纤维 试验用的几种取样方法 | Textile fibres; Some methods of sampling for testing |
| ISO 1136-1976 | 羊毛 纤维平均直径的测定 透气性法 | Wool; Determination of mean diameter of fibres; Air permeability method |
| ISO 1140-2004 | 纤维绳索.聚酰胺绳索.3、4 和8股绞绳 | Fibre ropes - Polyamide - 3-, 4- and 8-strand ropes |
| ISO 1141-2004 | 纤维绳索.聚酯绳索.3、4 和8股绞绳 | Fibre ropes - Polyester - 3-, 4- and 8-strand ropes |
| ISO 11566-1996 | 碳纤维 单长丝试样拉伸性能的测定 | Carbon fibre - Determination of the tensile properties of single-filament specimens |
| ISO 11567-1995 | 碳纤维 长丝直径和横截面积的测定 | Carbon fibre - Determination of filament diameter and cross-sectional area |
| ISO 11667-1997 | 纤维增强塑料 模塑料和预浸料 树脂、增强纤维和矿物质填料含量的测定 溶解法 | Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods |
| ISO 1172-1996 | 纺织玻璃纤维增强塑料、预浸料、模塑料和层压塑料 纺织玻璃纤维和矿物质填料含量的测定 煅烧法 | Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods |
| ISO 11721-1-2001 | 纺织品 纤维素纺织品抗菌性的测定 土埋试验 第1部分:防腐处理的评定 | Textiles - Determination of resistance of cellulose-containing textiles to micro-organisms; Soil burial test - Part 1: Assessment of rot-retardant finishing |
| ISO 11721-2-2003 | 纺织品.纤维素纺织品抗菌性的测定.土埋试验.第2部分:防腐处理长期有效性的鉴定 | Textiles - Determination of the resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 2: Identification of long-term resistance of a rot retardant finish |
| ISO 1181-2004 | 纤维绳索.马尼拉麻和西沙尔麻绳索.3、4和8股绳 | Fibre ropes - Manila and sisal - 3-, 4- and 8-strand ropes |
| ISO 11861-1999 | 铺地织物 椰壳粗纤维垫 类型和规范 | Textile floor coverings - Coir mats - Types and specification |
| ISO 11923-1997 | 水质 玻璃纤维过滤器过滤法测定悬浮物 | Water quality - Determination of suspended solids by filtration through glass-fibre filters |
| ISO 12114-1997 | 纤维增强塑料 热固性模压塑料和预浸料 固化特性的测定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics |
| ISO 12115 Technical Corrigendum 1-1998 | 纤维增强塑料 热固性模压塑料和预浸料 流动性、熟化期和适用期的测定 技术勘误1 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life; Technical Corrigendum 1 |
| ISO 12115-1997 | 纤维增强塑料 热固性模压塑料和预浸料 流动性、熟化期和适用期的测定 | Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life |
| ISO 12215-1-2000 | 小艇 船体结构和尺寸 第1部分:材料:热固性树脂、玻璃纤维增强材料、基准层压板 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| ISO 1268-1-2001 | 纤维增强塑料 试验板制造方法 第1部分：一般条件 | Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions |
| ISO 1268-10-2005 | 纤维增强塑料.试验板的生产方法.第10部分:BMC和其他长纤维模塑化合物的注模.多用途试样的模制和一般原则 | Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens |
| ISO 1268-11-2005 | 纤维增强塑料.试验板的生产方法.第11部分:BMC和其他长纤维模塑化合物的注模.小型试验板 | Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates |
| ISO 1268-2-2001 | 纤维增强塑料 试验板的制备方法 第2部分：接触和喷涂压塑法 | Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding |
| ISO 1268-3-2000 | 纤维增强塑料 试验板的制备方法 第3部分:湿压塑 | Fibre-reinforced plastics - Methods of producing test plates - Part 3: Wet compression moulding |
| ISO 1268-4-2005 | 纤维增强塑料.试验板制造方法.第4部分:预浸料坯的模制 | Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs |
| ISO 1268-5-2001 | 纤维增强塑料 试验板的制备方法 第5部分：绕丝法 | Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding |
| ISO 1268-6-2002 | 纤维增强塑料.试验用板材的生产方法.第6部分:Pultrusion 铸造品 | Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding |
| ISO 1268-7-2001 | 纤维增强塑料 试验板的制备方法 第7部分：树脂传递模塑法 | Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding |
| ISO 1268-8-2004 | 纤维增强塑料.试验板的制备方法.第8部分:SMC和BMC的压缩模制 | Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC |
| ISO 1268-9-2003 | 纤维增强塑料.试验板的制备方法.第9部分:GMT/STC模制 | Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC |
| ISO 13002-1998 | 碳纤维 长丝纱命名体系 | Carbon fibre - Designation system for filament yarns |
| ISO 13003-2003 | 纤维增强塑料.周期性荷载条件下疲劳特性的测定 | Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions |
| ISO 1346-2004 | 纤维绳索.聚丙烯裂膜、单丝和多丝(PP2)及聚丙烯高弹性多丝(PP3)绳索.3、4和8股绳索 | Fibre ropes - Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) - 3-, 4- and 8-strand ropes |
| ISO 13586 AMD 1-2003 | 塑料.断裂韧性的测定G<上标IC>)和K<上标IC>.线弹性断裂力学法.修改件1:含不连续增强纤维的注塑成形塑料的试 | Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>); Linear elastic fracture mechanics (LEFM) approach - Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinous reinforcing fibres |
| ISO 137-1975 | 羊毛 纤维直径的测定 投影显微镜法 | Wool; Determination of fibre diameter; Projection microscope method |
| ISO 13794-1999 | 环境空气 石棉纤维的测定 间接传递电子显微镜法 | Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method |
| ISO 14125 Technical Corrigendum 1-2001 | 纤维增强塑料复合材料 弯曲性能的测定 技术勘误1 | Fibre-reinforced plastic composites - Determination of flexural properties; Technical Corrigendum 1 |
| ISO 14125-1998 | 纤维增强塑料复合材料 弯曲性能的测定 | Fibre-reinforced plastic composites - Determination of flexural properties |
| ISO 14126 Technical Corrigendum 1-2001 | 纤维增强塑料复合材料 平面方向压缩性的测定 技术勘误1 | Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction; Technical corrigendum 1 |
| ISO 14126-1999 | 纤维增强塑料复合材料 平面方向压缩性的测定 | Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction |
| ISO 14129-1997 | 纤维增强塑料复合材料 用±45°张力试验法测定平面剪应力/剪应变特性,包括平面切变模量和剪切强度 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ?45° tension test method |
| ISO 14130 Technical Corrigendum 1-2003 | 纤维增强塑料复合材料.用短试片法测定表观层间粘合剪切强度.技术勘误1 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method; Technical Corrigendum 1 |
| ISO 14130-1997 | 纤维增强塑料复合材料 用短试片法测定表观层间粘合剪切强度 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method |
| ISO 14446-1999 | 色漆和清漆用粘合剂 工业乙酸纤维素溶液粘度测定及此类溶液的分类 | Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions |
| ISO 14692-1-2002 | 石油和天然气工业.玻璃纤维增强塑料管.第1部分:词汇、符号、应用和材料 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials |
| ISO 14692-2-2002 | 石油和天然气工业.玻璃纤维增强塑料管.第2部分:合格鉴定和制造 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture |
| ISO 14692-3-2002 | 石油和天然气工业.玻璃纤维增强塑料管.第3部分:系统管道 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System piping |
| ISO 14692-4 Technical Corrigendum 1-2006 | 石油和天然气工业.玻璃纤维增强塑料管.第4部分:制作、安装和操作;技术勘误1 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation; Technical Corrigendum 1 |
| ISO 14692-4-2002 | 石油和天然气工业.玻璃纤维增强塑料管.第4部分:制作、安装和操作 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation |
| ISO 14828-2003 | 玻璃纤维增强热固性塑料管.潮湿条件下长期特定环形松驰硬度的测定和湿松弛因数的计算 | Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation factor |
| ISO 14966 Technical Corrigendum 1-2007 | 环境空气.无机纤维颗粒数值浓度的测定.扫描电子显微镜法.技术勘误1 | Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1 |
| ISO 14966-2002 | 环境空气.无机纤维颗粒的数值浓度的测定.扫描电子显微镜检查法 | Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method |
| ISO 15024-2001 | 纤维增强塑料复合材料 间接增强材料的模型I层间摩擦粗糙度的测定 | Fibre-reinforced plastic composites - Determination of Mode I interlaminar fracture toughness, G<(Index)IC>, for unidirectionally reinforced materials |
| ISO 15100-2000 | 塑料 增强纤维 短切原丝 体积密度的测定 | Plastics - Reinforcement fibres - Chopped strands; Determination of bulk density |
| ISO 15310-1999 | 纤维增强塑料复合材料 用板捻法测定内剪模量 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method |
| ISO 15598-1999 | 茶叶 粗纤维含量的测定 | Tea - Determination of crude fibre content |
| ISO 15630-2-2002 | 混凝土的钢筋和预应力用钢.试验方法.第2部分:焊接纤维 | Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric |
| ISO 15733-2001 | 精细陶瓷（高级陶瓷，先进技术陶瓷） 连续纤维增强复合材料的室温拉申应力特性的试验方法 | Fine ceramics (advanced ceramis, advanced technical ceramics) - Test method for tensile stress-strain behaviour of continuous, fibre-reinforced composites at room temperature |
| ISO 15840-2004 | 船舶和海上技术.用于海上设备的热固性树脂纤维管道和装置的标准规范 | Ships and marine technology - Standard specification for thermosetting resin fibreglass pipe and fittings to be used for marine applications |
| ISO 1598-1990 | 塑料 乙酸纤维素 不溶物的测定 | Plastics; cellulose acetate; determination of insoluble particles |
| ISO 1599-1990 | 塑料 乙酸纤维素 模塑时粘度降低的测定 | Plastics; cellulose acetate; determination of viscosity loss on moulding |
| ISO 1600-1990 | 塑料 乙酸纤维素 利用热的不同循环在生产模制样品中光吸收量的测定 | Plastics; cellulose acetate; determination of light absorption on moulded specimens produced using different periods of heating |
| ISO 16000-7-2007 | 室内空气.第7部分:空气中石棉纤维浓度测定用取样策略 | Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations |
| ISO 16057-2002 | 涂覆磨料.硫化纤维砂轮 | Coated abrasives - Vulcanized fibre discs |
| ISO 16065-1-2001 | 纸浆 用自动光学分析法测定纤维长度 第1部分：偏振光法 | Pulps - Determination of fibre length by automated optical analysis - Part 1: Polarized light method |
| ISO 16065-2-2007 | 纸浆.用自动光学分析法对纤维长度的测定.第2部分:非偏振光法 | Pulps - Determination of fibre length by automated optical analysis - Part 2: Unpolarized light method |
| ISO 16472-2006 | 动物饲料.精制淀粉酶中性清洁剂纤维(aNDF)含量的测定 | Animal feeding stuffs - Determination of amylase-treated neutral detergent fibre content (aNDF) |
| ISO 16549-2004 | 纺织物.纤维绳的不均匀性.容量法 | Textiles - Unevenness of textile strands - Capacitance method |
| ISO 17064-2004 | 木基板材.纤维板、碎料板和定向绞合板(OSB).词汇 | Wood-based panels - Fibreboard, particleboard and oriented strand board (OSB) - Vocabulary |
| ISO 17504-1999 | 铺地织物 用磨损仪测定羊毛纤维的完整性 | Textile floor coverings - Determination of wool fibre integrity using an abrasion machine |
| ISO 17771-2003 | 塑料.热固性模塑料.片状成型料(SMC)中玻璃纤维浸润度的测定 | Plastics - Thermoset moulding compounds - Determination of the degree of fibre wet out in SMC |
| ISO 1833 AMD 1-1980 | 纺织品 双组分纤维混合物 定量化学分析 修改1 | Textiles; binary fibre mixtures; quantitative chemical analysis; amendment 1 |
| ISO 1833-10-2006 | 纺织品.定量化学分析.第10部分:三醋酸酯或聚交酯和某些其它纤维的混合(二氯甲法) | Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) |
| ISO 1833-11-2006 | 纺织品.定量化学分析.第11部分:纤维素和聚酯纤维的混合（硫酸法） | Textiles - Quantitative chemical analysis - Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) |
| ISO 1833-12-2006 | 纺织品.定量化学分析.第12部分:丙烯酸、某些改良丙烯酸、某些聚氯乙烯系纤维、某些弹性烷及某些其它纤维的 | Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) |
| ISO 1833-13-2006 | 纺织品.定量化学分析.第13部分:某聚氯乙烯系纤维和某些其它纤维的混合（二硫化碳/丙酮法） | Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) |
| ISO 1833-14-2006 | 纺织品.定量化学分析.第14部分:乙酸酯和某些聚氯乙烯系纤维的混合（乙酸法） | Textiles - Quantitative chemical analysis - Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) |
| ISO 1833-15-2006 | 纺织品.定量化学分析.第15部分:黄麻和某些动物纤维的混合（氮含量测定法） | Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) |
| ISO 1833-16-2006 | 纺织品.定量化学分析.第16部分:聚丙烯和某些其它纤维的混合（二甲苯法） | Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) |
| ISO 1833-17-2006 | 纺织品.定量化学分析.第17部分:含氯纤维（氯乙烯的均聚物) 和某些其它纤维的混合（硫磺酸法） | Textiles - Quantitative chemical analysis - Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) |
| ISO 1833-19-2006 | 纺织品.定量化学分析.第19部分:纤维素纤维和石棉的混合（加热法） | Textiles - Quantitative chemical analysis - Part 19: Mixtures of cellulose fibres and asbestos (method by heating) |
| ISO 1833-1977 | 纺织品 双组分纤维混合物 定量化学分析 | Textiles; Binary fibre mixtures; Quantitative chemical analysis |
| ISO 1833-2-2006 | 纺织品.定量化学分析.第2部分:三组分纤维混合物 | Textiles - Quantitative chemical analysis - Part 2: Ternary fibre mixtures |
| ISO 1833-21-2006 | 纺织品.定量化学分析.第21部分:聚氯乙烯系纤维、某些改良丙烯酸、某些弹性烷、乙酸酯、三醋酸酯和某些其它 | Textiles - Quantitative chemical analysis - Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) |
| ISO 1833-3-2006 | 纺织品.定量化学分析.第3部分:乙酸酯和某些其它纤维的混合(用丙酮法) | Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate and certain other fibres (method using acetone) |
| ISO 1833-4-2006 | 纺织品.定量化学分析.第4部分:固定纤维蛋白质和其他固定纤维混纺织品（使用次氯酸盐法） | Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) |
| ISO 1833-5-2006 | 纺织品.定量化学分析.第5部分:粘胶纤维、铜氨纤维或莫代尔纤维和棉纤维的混合（锌酸钠法） | Textiles - Quantitative chemical analysis - Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) |
| ISO 1833-6-2007 | 纺织材料.定量化学分析.第6部分:粘胶纤维或特定类型铜氨纤维或高温模量粘胶纤维或溶解性纤维素纤维和棉纤维 | Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) |
| ISO 1833-7-2006 | 纺织品.定量化学分析.第7部分:聚酰胺和某些其它纤维的混合（甲酸法） | Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) |
| ISO 1833-8-2006 | 纺织品.定量化学分析.第8部分:乙酸酯和三醋酸纤维的混合（丙酮法） | Textiles - Quantitative chemical analysis - Part 8: Mixtures of acetate and triacetate fibres (method using acetone) |
| ISO 1833-9-2006 | 纺织品.定量化学分析.第9部分:乙酸酯和三醋酸混纺纤维(苄醇法） | Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) |
| ISO 1856-2000 | 可塑纤维素聚合材料 拉伸强度和断裂伸长的测定 | Flexible cellular polymeric materials - Determination of compression set |
| ISO 18692-2007 | 海上看守岗用纤维绳.聚酯 | Fibre ropes for offshore stationkeeping - Polyester |
| ISO 1875-1982 | 塑料 增塑的乙酸纤维素 乙醚萃取物测定 | Plastics; Plasticized cellulose acetate; Determination of matter extractable by diethyl ether |
| ISO 1887-1995 | 纺织玻璃纤维 易燃物质含量的测定 | Textile glass - Determination of combustible-matter content |
| ISO 1888-2006 | 纺织玻璃纤维.短纤维或长丝.平均直径的测定 | Textile glass - Staple fibres or filaments - Determination of average diameter |
| ISO 1968-2005 | 纤维绳索和绳索制品.词汇 | Fibre ropes and cordage - Vocabulary |
| ISO 1969-2004 | 纤维绳索.聚乙烯.3和4股绳索 | Fibre ropes - Polyethylene - 3- and 4-strand ropes |
| ISO 1973-1995 | 纺织纤维 线密度的测定 称重和振动法 | Textiles fibres - Determination of linear density - Gravimetric method and vibroscope method |
| ISO 20504-2006 | 精细陶瓷(高级陶瓷、高级工业陶瓷).在室温下连续纤维增强复合材料的压缩特性试验方法 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature |
| ISO 20505-2005 | 精密陶瓷(高级陶瓷、高级工业陶瓷).用双凹口试件挤压和Iosipescu试验在环境温度下连续纤维增强复合材料层间 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test |
| ISO 20506-2005 | 细陶瓷(高级陶瓷、高级工业陶瓷).在室温下用Iosipescu试验测定连续纤维增强复合材料的面内剪切强度 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test |
| ISO 2076-1999 | 纺织品 人造纤维 属名 | Textiles - Man-made fibres - Generic names |
| ISO 2078-1993 | 纺织玻璃纤维 纱线 名称 | Textile glass; yarns; designation |
| ISO 2113 Technical Corrigendum 1-2003 | 增强纤维.机织物.基本规范.技术勘误1 | Reinforcement fibres - Woven fabrics - Basis for a specification; Technical Corrigendum 1 |
| ISO 2113-1996 | 增强纤维 机织物 基本规范 | Reinforcement fibres - Woven fabrics - Basis for a specification |
| ISO 22198-2006 | 纺织物.纤维.测定宽度和长度 | Textiles - Fabrics - Determination of width and length |
| ISO 22306-2007 | 重力系统纤维增强水泥管、接缝和管件 | Fibre-reinforced cement pipe, joints and fittings for gravity systems |
| ISO 22314-2006 | 塑料.玻璃纤维增强产品.纤维长度测定 | Plastics - Glass-fibre-reinforced products - Determination of fibre length |
| ISO 2307-2005 | 纤维绳索.特定物理和机械性能的测定 | Fibre ropes - Determination of certain physical and mechanical properties |
| ISO 2370-1980 | 纺织品 亚麻纤维细度的测定 透气法 | Textiles; Determination of fineness of flax fibres; Permeametric methods |
| ISO 23713-2005 | 纸浆.用自动光学分析测定纤维粗度.偏振光法 | Pulps - Determination of fibre coarseness by automated optical analysis - Polarized light method |
| ISO 2403-1972 | 纺织品 棉纤维 马克隆值的测定 | Textiles; Cotton fibres; Determination of micronaire value |
| ISO 2558-1974 | 增强塑料用玻璃纤维短切原丝毡 粘合剂在苯乙烯中溶解时间的测定 | Textile glass chopped-strand mats for reinforcement of plastics; Determination of time of dissolution of the binder in styrene |
| ISO 2559-2000 | 纺织玻璃纤维 垫(由短线或连续胶捻线制成) 名称和基本规范 | Textile glass - Mats (made from chopped or continuous strands) - Designation and basis for specifications |
| ISO 2646-1974 | 羊毛 使用纤维长度分析仪测定在精梳系统上加工的纤维长度 | Wool; Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine |
| ISO 2647-1973 | 羊毛 用投影显微镜测定有髓纤维的百分率 | Wool; Determination of percentage of medullated fibres by the projection microscope |
| ISO 2648-1974 | 羊毛 纤维长度分布参数的测定 电子法 | Wool; Determination of fibre length distribution parameters; Electronic method |
| ISO 2695-1976 | 建筑用纤维板 一般用途硬质和中质板:质量规范 外观、形状和尺寸公差 | Fibre building boards; Hard and medium boards for general purposes; Quality specifications; Appearance, shape and dimensional tolerances |
| ISO 2696-1976 | 建筑用纤维板 一般用途硬质和中质板:质量规范 吸水性和厚度膨胀 | Fibre building boards; Hard and medium boards for general purposes; Quality specifications; Water absorption and swelling in thickness |
| ISO 2797-1986 | 纺织玻璃纤维 粗纱 基本规范 | Textile glass; Rovings; Basis for a specification |
| ISO 3037-2007 | 瓦楞纸纤维板. 边缘抗压强度的测定(边缘未浸腊法) | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) |
| ISO 3060-1974 | 纺织品 棉纤维 束纤维断裂强度的测定 | Textiles; Cotton fibres; Determination of breaking tenacity of flat bundles |
| ISO 3340-1976 | 建筑用纤维板 含砂量的测定 | Fibre building boards; Determination of sand content |
| ISO 3341-2000 | 纺织玻璃纤维 纱线 断裂强力和断裂伸长的测定 | Textile glass - Yarns - Determination of breaking force and breaking elongation |
| ISO 3342-1995 | 纺织玻璃纤维 毡 拉伸断裂强力的测定 | Textile glass - Mats - Determination of tensile breaking force |
| ISO 3343-1984 | 纺织玻璃纤维 纱线 捻度平衡指数的测定 | Textile glass; Yarns; Determination of twist balance index |
| ISO 3375-1975 | 纺织玻璃纤维 粗纱硬挺度的测定 | Textile glass; Determination of stiffness of rovings |
| ISO 3451-3-1984 | 塑料 灰分的测定 第3部分:未增塑的乙酸纤维素 | Plastics; Determination of ash; Part 3 : Unplasticized cellulose acetate |
| ISO 3505-1975 | 绳索和绳索制品 系船用的天然纤维绳索和化学纤维绳索的等效性 | Ropes and cordage; Equivalence between natural fibre ropes and man-made fibre ropes for use in the mooring of vessels |
| ISO 3546-1976 | 建筑用纤维板 表面光洁度(粗糙度)的测定 | Fibre building boards; Determination of surface finish (roughness) |
| ISO 3597-1-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.第1部分:棒材的一般考虑和制备 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 1: General considerations and preparation of rods |
| ISO 3597-2-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.第2部分:弯曲强度的测度 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2: Determination of flexural strength |
| ISO 3597-3-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.第3部分:压缩强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 3: Determination of compressive strength |
| ISO 3597-4-2003 | 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.第4部分:表观层间剪切强度的测定 | Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength |
| ISO 3598-1986 | 纺织玻璃纤维 纱线 基本规范 | Textile glass; Yarns; Basis for a specification |
| ISO 36-2005 | 硫化或热塑性橡胶.纺织纤维粘着强度的测定 | Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics |
| ISO 3616-2001 | 纺织玻璃纤维 毡 平均厚度、加载厚度和加载后复原厚度的测定 | Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression |
| ISO 3729-1976 | 建筑用纤维板 表面稳定性的测定 | Fibre building boards; Determination of surface stability |
| ISO 390-1993 | 纤维增强水泥制品 抽样和检验 | Products in fibre-reinforced cement; sampling and inspection |
| ISO 3914-5-1994 | 纺织机械与附件 圆柱形筒管 第5部分:合成纤维长丝筒管的尺寸、公差和标记 | Textile machinery and accessories - Cylindrical tubes - Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns |
| ISO 4345-1988 | 钢丝绳 纤维主芯 规范 | Steel wire ropes; fibre main cores; specification |
| ISO 4603-1993 | 纺织玻璃纤维 机织物 厚度的测定 | Textile glass; woven fabrics; determination of thickness |
| ISO 4604-1978 | 纺织玻璃纤维 机织物 普通弯曲硬挺度的测定 固定角弯曲计法 | Textile glass; Woven fabrics; Determination of conventional flexural stiffness; Fixed angle flexometer method |
| ISO 4606-1995 | 纺织玻璃纤维 机织物 用条样法测定拉伸断裂强力和断裂伸长 | Textile glass - Woven fabric - Determination of tensile breaking force and elongation at break by the strip method |
| ISO 4899-1993 | 纺织玻璃纤维 增强热固性塑料 性能和试验方法 | Textile-glass reinforced thermosetting plastics; properties and test methods |
| ISO 4900-1990 | 纺织玻璃纤维 毡和织物 手工覆模性的测定 | Textile glass; mats and fabrics; determination of contact mouldability |
| ISO 4911-1980 | 纺织品 棉纤维 原棉分级室用设备和人造光源 | Textiles; Cotton fibres; Equipment and artificial lighting for cotton classing rooms |
| ISO 4912-1981 | 纺织品 棉纤维 成熟度的测量 显微镜法 | Textiles; Cotton fibres; Evaluation of maturity; Microscopic method |
| ISO 4913-1981 | 纺织品 棉纤维 长度(跨距长度)和整齐度指数的测定 | Textiles; Cotton fibres; Determination of length (span length) and uniformity index |
| ISO 5079-1995 | 纺织纤维 单纤维断裂强力和伸长率的测定 | Textile fibres - Determination of breaking force and elongation at break of individual fibres |
| ISO 527-4-1997 | 塑料 拉伸性能的测定 第4部分:各向同性及各向异性纤维增强塑料复合材料试验条件 | Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
| ISO 527-5-1997 | 塑料 拉伸性能的测定 第5部分:单向纤维增强塑料复合材料试验条件 | Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
| ISO 5350-3-1997 | 纸浆 尘埃和纤维束的估算 第3部分:通过反射光检验 | Pulps - Estimation of dirt and shives - Part 3: Inspection by reflected light |
| ISO 5498-1981 | 农产食品 粗纤维含量的测定 一般方法 | Agricultural food products; Determination of crude fibre content; General method |
| ISO 585-1990 | 塑料 未增塑的乙酸纤维素 水分含量的测定 | Plastics; unplasticized cellulose acetate; determination of moisture content |
| ISO 6541-1981 | 农产食品 粗纤维含量的测定 改进的沙勒法 | Agricultural food products; Determination of crude fibre content; Modified Scharrer method |
| ISO 6741-1-1989 | 纺织品 纤维和纱线 交付货物商业质量的测定 第1部分:质量的测定和计算 | Textiles; fibres and yarns; determination of commercial mass of consignments; part 1: mass determination and calculations |
| ISO 6741-2-1987 | 纺织品 纤维和纱线 交付货物商业质量的测定 第2部分:实验室取样法 | Textiles; Fibres and yarns; Determination of commercial mass of consignments; Part 2 : Methods for obtaining laboratory samples |
| ISO 6741-3-1987 | 纺织品 纤维和纱线 交付货物商业质量的测定 第3部分:样品净化规程 | Textiles; Fibres and yarns; Determination of commercial mass of consignments; Part 3 : Specimen cleaning procedures |
| ISO 6865-2000 | 动物饲料 粗纤维含量的测定 中级过滤法 | Animal feeding stuffs - Determination of crude fibre content - Method with intermediate fibration |
| ISO 6888-2 AMD 1-2003 | 食品和动物饲料的微生物学.凝血酶阳性葡萄球菌(金黄色葡萄球菌及其他种)计数的水平方法.第2部分:兔血浆纤维 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium; Amendment 1: Inclusion of precision date |
| ISO 6888-2-1999 | 食品和动物饲料的微生物学 凝血酶阳性葡萄球菌(金黄色葡萄球菌及其他种)计数的水平方法 第2部分: 兔血浆纤 | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar medium |
| ISO 6938-1984 | 纺织品 天然纤维 属名和定义 | Textiles; Natural fibres; Generic names and definitions |
| ISO 6989-1981 | 纺织纤维 短纤维长度和长度分布的测定(单纤维测定) | Textile fibres; Determination of length and length distribution of staple fibres (by measurement of single fibres) |
| ISO 7370-1983 | 玻璃纤维增强热固性塑料(GRP)管材和管件 公称直径、规定直径和标准长度 | Glass fibre reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths |
| ISO 7432-2002 | 玻璃纤维增强热固性塑料管道和管配件.检验设计带弹性体密封件的锁紧套筒连接件,包括双插孔连接件的试验方法 | Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals |
| ISO 75-3-2004 | 塑料.载荷下挠曲温度的测定.第3部分:高强度热固性叠层板和长纤维增强塑料 | Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
| ISO 7509-2000 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 持续内压力下破坏时间的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure |
| ISO 7510-1997 | 塑料管道系统 玻璃纤维增强塑料(GRP)元件 重量法测定成分 | Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method |
| ISO 7511-1999 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材和管件 确定短期内压下管壁密封性的检验方法 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure |
| ISO 7684-1997 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 干燥条件下蠕变系数的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions |
| ISO 7685-1998 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 初始有效环刚度的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness |
| ISO 769-1972 | 建筑用纤维板 硬质和中质板:浸水后吸水性和厚度膨胀的测定 | Fibre building boards; Hard and medium boards; Determination of water absorption and of swelling in thickness after immersion in water |
| ISO 7822-1990 | 玻璃纤维增强塑料 孔隙率的测定 烧失量、机械粉碎和静态计数法 | Textile glass reinforced plastics; determination of void content; loss on ignition, mechanical disintegration and statistical counting methods |
| ISO 7884-3-1987 | 玻璃 粘度和粘度固定点 第3部分:用纤维伸长粘度计测定粘度 | Glass; Viscosity and viscometric fixed points; Part 3 : Determination of viscosity by fibre elongation viscometer |
| ISO 8115-2-1994 | 包 第2部分:人造短纤维包 尺寸 | Bales - Part 2: Bales of man-made staple fibres - Dimensions |
| ISO 8159-1987 | 纺织品 纤维和纱线的形态 词汇 两种语言版 | Textiles; Morphology of fibres and yarns; Vocabulary Bilingual edition |
| ISO 8335-1987 | 水泥胶结颗粒板 木质纤维粒增强波特兰水泥或相类似的水泥板 | Cement-bonded particleboards; Boards of Portland or equivalent cement reinforced with fibrous wood particles |
| ISO 8336 AMD 1-2004 | 纤维水泥平板.修改件1 | Fibre-cement flat sheets; Amendment 1 |
| ISO 8336 Technical Corrigendum 1-2005 | 纤维水泥平板.技术勘误1 | Fibre-cement flat sheets; Technical Corrigendum 1 |
| ISO 8336-1993 | 纤维水泥平板 | Fibre-cement flat sheets |
| ISO 8513-2000 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 纵向抗拉特性的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of longitudinal tensile properties |
| ISO 8516-1987 | 纺织玻璃纤维 膨体纱 基本规范 | Textile glass; Textured yarns; Basis for a specification |
| ISO 8521-1998 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 表面内周拉伸强度的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength |
| ISO 8572-1991 | 玻璃纤维增强热塑性塑料管材和管件 与压力有关的定义,包括它们之间关系,以及安装和连接的术语 | Pipes and fittings made of glass-reinforced thermosetting plastics (GRP); definitions of terms relating to pressure, including relationships between them, and terms for installation and jointing |
| ISO 8605-2001 | 玻璃纤维增强塑料 片状模塑料(SMC) 基本规范 | Textile-glass-reinforced plastics - Sheet moulding compound (SMC) - Basis for a specification |
| ISO 8672-1993 | 空气质量 用相差光学显微镜法测定空气无机纤维浓度 滤膜法 | Air quality; determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy; membrane filter method |
| ISO 9073-10-2003 | 纺织品.非织造布的试验方法.第10部分:干燥状态下纤维戎和其它粒子生成物 | Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state |
| ISO 9125 AMD 1-2004 | 纤维水泥板和配件.修改件1 | Fibre-cement slates and fittings - Amendment 1 |
| ISO 9125 Technical Corrigendum 1-1993 | 纤维水泥板和配件 技术勘误1 | Fibre-cement slates and fittings; technical corrigendum 1 |
| ISO 9125 Technical Corrigendum 2-2005 | 纤维水泥平板.技术勘误2 | Fibre-cement slates and fittings; Technical Corrigendum 2 |
| ISO 9125-1990 | 纤维水泥板和配件 | Fibre-cement slates and fittings |
| ISO 9163-2005 | 玻璃纤维无捻粗纱 浸胶纱试样的制作和拉伸强度的测定 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| ISO 9184-1-1990 | 纸浆、纸和纸板 纤维组成分析 第1部分:通用方法 | Paper, board and pulps; fibre furnish analysis; part 1: general method |
| ISO 9184-2-1990 | 纸浆、纸和纸板 纤维组成分析 第2部分:染色指南 | Paper, board and pulps; fibre furnish analysis; part 2: staining guide |
| ISO 9184-3-1990 | 纸浆、纸和纸板 纤维组成分析 第3部分:赫伯格染色试验 | Paper, board and pulps; fibre furnish analysis; part 3: Herzberg staining test |
| ISO 9184-4-1990 | 纸浆、纸和纸板 纤维组成分析 第4部分:格拉夫“C”染色试验 | Paper, board and pulps; fibre furnish analysis; part 4: Graff "C" staining test |
| ISO 9184-5-1990 | 纸浆、纸和纸板 纤维组成分析 第5部分:洛夫顿-梅里特染色试验 | Paper, board and pulps; fibre furnish analysis; part 5: Lofton-Merritt staining test (modification of Wisbar) |
| ISO 9184-6-1994 | 纸浆、纸和纸板 纤维组成分析 第6部分:纤维粗度测定 | Paper, board and pulps - Fibre furnish analysis - Part 6: Determination of fibre coarseness |
| ISO 9184-7-1994 | 纸浆、纸和纸板 纤维组成分析 第7部分:权重因数测定 | Paper, board and pulps - Fibre furnish analysis - Part 7: Determination of weight factor |
| ISO 920-1976 | 羊毛 使用梳片分析器测定纤维长度(巴布长度和豪特长度) | Wool; Determination of fibre length (barbe and hauteur) using a comb sorter |
| ISO 9383 AMD 1-2004 | 纤维增强水泥制品.屋面用小波瓦或非对称截面瓦和配件.修改件1 | Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing; Amendment 1 |
| ISO 9383 Technical Corrigendum 1-2005 | 纤维增强水泥制品.屋面用小波瓦或非对称截面瓦和配件.技术勘误1 | Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing; Technical Corrigendum 1 |
| ISO 9383-1995 | 纤维增强水泥制品 屋面用小波瓦或非对称截面瓦和配件 | Products in fibre-reinforced cement - Short corrugated or asymmetrical section sheets and fittings for roofing |
| ISO 9384 AMD 1-2004 | 纤维水泥背瓦.修改件1 | Fibre-cement siding shingles; Amendment 1 |
| ISO 9384 Technical Corrigendum 1-2005 | 纤维水泥背瓦.技术勘误1 | Fibre-cement siding shingles; Technical Corrigendum 1 |
| ISO 9384-1991 | 纤维水泥背瓦 | Fibre-cement siding shingles |
| ISO 9554-2005 | 纤维绳索.一般规范 | Fibre ropes - General specifications |
| ISO 9933 AMD 1-2004 | 纤维增强水泥制品.屋面和覆盖用大波瓦或非对称截面瓦和配件.修改件1 | Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Amendment 1 |
| ISO 9933 Technical Corrigendum 1-1999 | 纤维增强水泥制品 屋面和覆盖用大波瓦或非对称截面瓦和配件 技术勘误1 | Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Technical corrigendum 1 |
| ISO 9933 Technical Corrigendum 2-2005 | 纤维增强水泥制品.屋面和覆盖用大波瓦或非对称截面瓦和配件.技术勘误2 | Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding; Technical Corrigendum 2 |
| ISO 9933-1995 | 纤维增强水泥制品 屋面和覆盖用大波瓦或非对称截面瓦和配件 | Products in fibre-reinforced cement - Long corrugated or asymmetrical section sheets and fittings for roofing and cladding |
| ISO/ASTM 51650-2005 | 醋酸纤维素剂量测定系统使用规程 | Practice for use of a cellulose triacetate dosimetry system |
| ISO/IEC 14776-222-2005 | 信息技术.小型计算机系统接口(SCSI).第222部分:SCSI的纤维信道协议.第二版(FCP-2) | Information technology - Small Computer System Interface (SCSI) - Part 222: Fibre Channel Protocol for SCSI, Second Version (FCP-2) |
| ISO/IEC TR 14165-117-2007 | 信息技术.纤维通道.第117部分:跳动和信号质量(MJSQ)方法论 | Information technology - Fibre Channel - Part 117: Methodologies for jitter and signal quality (MJSQ) |
| ISO/PAS 11856-2003 | 铺地织物.纤维捆绑物测定的试验方法 | Textile floor coverings - Test methods for the determination of fibre bind |
| ISO/TR 10465-2-2007 | 基于非饱和聚酯树脂的柔性玻璃纤维增强管材的地下安装.第2部分:静态计算方法的比较 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 2: Comparison of static calculation methods |
| ISO/TR 10465-3-2007 | 基于非饱和聚酯树脂的柔性玻璃纤维增强管材(GRP-UP)的地下安装.第3部分:安装参数和应用限值 | Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 3: Installation parameters and application limits |
| ISO/TR 1896-1991 | 纤维增强水泥制品 绝热和防火用非燃性硅酸钙或水泥纤维增强板 | Products in fibre-reinforced cement; non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection |
| ISO/TR 6741-4-1987 | 纺织品 纤维和纱线 交付货物商业质量的测定 第4部分:用于商业允贴和商业回潮率的评估 | Textiles; Fibres and yarns; Determination of commercial mass of consignments; Part 4 : Values used for the commercial allowances and the commercial moisture regains |
| ISO/TR 7469-1981 | 硬质纤维板的尺寸稳定性 | Dimensional stability of hardboards |
| 编号 | 中文名称 | 英文名称 |