| 编号 | 中文名称 | 英文名称 |
|---|
| ANSI B18.11-1961
| 微型螺钉
| Miniature Screws
|
| ANSI B18.2.3.8M-1981
| 米制六角方头螺钉
| Screws, Metric Hex Lag
|
| ANSI/ASME B107.15-2002
| 平头和十字槽螺钉旋具
| Flat-Tip and Phillips Screwdrivers
|
| ANSI/ASME B107.30-2002
| 十字头螺钉旋具
| Cross Tip Screwdrivers
|
| ANSI/ASME B107.46M-2004
| 螺柱、螺钉和管取出器.安全要求
| Stud, Screw and Pipe Extractors - Safety Requirements
|
| ANSI/ASME B18.13-1996
| 英制SEMS螺钉和垫圈组件
| Screw and Washer Assemblies - SEMS (Inch Series)
|
| ANSI/ASME B18.13.1M-1998
| 螺钉和垫圈组件.SEMS(米制)
| Screws and Washer Assemblies - SEMS (Metric Series)
|
| ANSI/ASME B18.2.1-1996
| 四方和六角形螺栓和螺钉(英寸系列)
| Square and Hex Bolts and Screws (Inch Series)
|
| ANSI/ASME B18.2.1a-1999
| 四方和六角形螺栓和螺钉(英制系列)
| Square and Hex Bolts and Screws (Inch Series)
|
| ANSI/ASME B18.2.3.1M-1999
| 螺钉,米制六角型螺帽
| Screws, Metric Hex Cap
|
| ANSI/ASME B18.2.3.2M-2005
| 米制成形六角螺钉
| Metric Formed Hex Screws
|
| ANSI/ASME B18.2.3.3M-2007
| 米制重六角形螺钉
| Metric Heavy Hex Screws
|
| ANSI/ASME B18.2.3.4M-2001
| 米制六角头法兰螺钉
| Screws, Metric Hex Flange
|
| ANSI/ASME B18.2.3.9M-2001
| 米制大型六角头带法兰螺钉
| Metric Heavy Hex Flange Screws
|
| ANSI/ASME B18.2.7.1M-2002
| 米制12-花键法兰螺钉
| Metric 12-Spline Flange Screws
|
| ANSI/ASME B18.2.8-1999
| 螺栓、螺钉和螺柱的通孔
| Clearance Holes for Bolts, Screws and Studs
|
| ANSI/ASME B18.2.9-2007
| 螺栓和螺钉用平直度量规和精确计量
| Straightness Gage and Gaging for Bolts and Screws
|
| ANSI/ASME B18.3-2003
| 圆柱头内六角有肩定位螺钉(英制系列)
| Socket Cap, Shoulder, and Set Screws (Inch Series)
|
| ANSI/ASME B18.3.1M-1986
| 米制系列内六角螺钉
| Screws, Socket Head Cap (Metric Series)
|
| ANSI/ASME B18.3.3M-1986
| 米制系列内六角轴肩螺钉
| Hexagon Socket Head Shoulder Screws (Metric Series)
|
| ANSI/ASME B18.3.4M-1986
| 米制系列内六角圆头螺钉
| Screws, Hexagon Socket Button Head Cap (Metric Series)
|
| ANSI/ASME B18.3.5M-1986
| 米制系列六角扁平沉头螺钉
| Hexagon Socket Flat Countersunk Head Cap Screws (Metric Series)
|
| ANSI/ASME B18.3.6M-1986
| 米制系列六角凹头制动螺钉
| Screws, Hexagon Socket Set (Metric Series)
|
| ANSI/ASME B18.6.1-1981
| 木螺丝(英寸系列)
| Wood Screws (Inch Series)
|
| ANSI/ASME B18.6.2-1998
| 开槽圆头螺钉、方头止动螺钉和开槽无头止动螺钉
| Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws
|
| ANSI/ASME B18.6.3-2003
| 有槽和凹槽头机器螺钉和机器螺母
| Slotted and Recessed Head Machine Screws and Machine Screw Nuts
|
| ANSI/ASME B18.6.4-2005
| 英制系列自攻螺钉和金属钉状螺丝的螺纹成型和切割
| Screws, Tapping and Metallic Drive, Inch Series, Thread Forming and Cutting
|
| ANSI/ASME B18.6.4-2005
| 英制系列自攻螺钉和金属钉状螺丝的螺纹成型和切割
| Screws, Tapping and Metallic Drive, Inch Series, Thread Forming and Cutting
|
| ANSI/ASME B18.6.5M-1999
| 公制螺纹成形和螺纹切削自攻螺钉
| Metric Thread Forming and Thread Cutting Tapping Screws
|
| ANSI/ASME B18.6.5Ma-2000
| 公制螺纹成形和螺纹切削自攻螺钉
| Metric Thread Forming and Thread Cutting Tapping Screws
|
| ANSI/ASME B18.6.7M-1999
| 米制机用螺钉
| Metric Machine Screws
|
| ANSI/SAE J1061-1992
| 普通螺栓、螺钉和双头螺栓的表面不均匀性
| Surface Discontinuities on General Application Bolts, Screws, and Studs
|
| ANSI/SAE J2295-1998
| 紧固件.零件标准帽螺钉、六角头螺栓和六角螺母
| Fasteners - Part Standard Cap Screws, Hex Bolts, and Hex Nuts
|
| ANSI/SAE J370-1998
| 建筑和工业机械用螺栓和有头螺钉尺寸
| Bolt and Capscrew Sizes for Use in Construction and Industrial Machinery
|
| ANSI/SAE J58-1998
| 凸缘12点螺钉
| Flanged 12-Point Screw
|
| ANSI/SAE J78-1998
| 钢制自钻孔自攻丝螺钉
| Steel Self-Drilling Tapping Screws
|
| ANSI/SAE J81-1997
| 螺纹滚轧螺钉
| Thread Rolling Screws
|
| ANSI/SAE J82-1998
| 机器螺钉的机械和质量要求
| Mechanical and Quality Requirements for Machine Screws
|
| ANSI/SAE J933-1998
| 自攻螺钉的机械和质量要求
| Mechanical and Quality Requirements for Tapping Screws
|
| ANSI/SCTE 29-2002
| 连接止动螺钉的连接导线穿过的扭矩要求
| Torque Requirements for Bond Wire Penetration of Bonding Set Screw
|
| ANSI/SMPTE 220-1996
| 电影和电视设备.摄像机的安装连接件.1/4英寸20螺纹和3/8英寸16螺纹三角架螺钉
| Motion-Picture and Television Equipment - Camera Mounting Connections - 1/4-inch, 20-Thread and 3/8-inch, 16-Thread Tripod Screws
|
| ASME B 18.2.1 Erratum-2003
| 方头和六角头螺栓和螺钉(英寸系列).对ASME B 18.2.1-1996的勘误
| (Square and hex bolts and screws (Inch series); Erratum to ASME B18.2.1-1996)
|
| ASME B18.11-1961
| 小型螺钉
| (Miniature screws)
|
| ASME B18.13-1996
| 螺钉和洗衣机组件.臂板(英寸系列)
| (Screw and washer assemblies - Sems (Inch series))
|
| ASME B18.2.1-1996
| 英制方头和六角头螺栓和螺钉(英制系列)
| (Square and hex bolts and screws (Inch series))
|
| ASME B18.2.1a Addenda-1999
| 方头和六角头螺栓和螺钉(英制系列).附录
| (Square and hex bolts and screws (inch series); Addenda)
|
| ASME B18.2.3.1M-1999
| 米制六角头螺钉
| (Metric hex cap screws)
|
| ASME B18.2.3.2M Errata-1980
| 米制成型六角头螺钉,正误表
| (Metric formed hex screws; Errata)
|
| ASME B18.2.3.2M-1979
| 米制成型六角头螺钉
| (Metric formed hex screws)
|
| ASME B18.2.3.3M Errata-1981
| 米制重型六角头螺钉,正误表
| (Metric heavy hex screws; Errata)
|
| ASME B18.2.3.3M-1979
| 米制重型六角头螺钉
| (Metric heavy hex screws)
|
| ASME B18.2.3.4M-2001
| 米制六角头法兰螺钉
| (Metric hex flange screws)
|
| ASME B18.2.3.8M-1981
| 米制六角木螺钉
| (Metric hex lag screws)
|
| ASME B18.2.3.9M-2001
| 米制大型六角头法兰螺钉
| (Metric heavy hex flange screws)
|
| ASME B18.2.7.1M Erratum-2002
| 米制12键槽凸缘螺钉.勘误
| (Metric 12-spline flange screws; Erratum)
|
| ASME B18.2.7.1M-2002
| 米制12键槽凸缘螺钉
| (Metric 12-spline flange screws)
|
| ASME B18.29.1 Errata-1995
| 英制螺旋线圈螺钉用螺纹垫片.空转和螺钉锁定.正误表
| (Helical coil screw thread inserts - Free running and screw locking (Inchs series))
|
| ASME B18.29.1-1993
| 英制螺旋线圈螺钉用螺纹垫片.空转和螺钉锁定
| (Helical coil screw thread inserts - Free running and screw locking (Inchs series))
|
| ASME B18.3-1998
| 六角键和花键圆柱头内六角有肩定位螺钉(英制系列)
| (Socket cap, shoulder, and set screws, hex and spline keys (Inch series))
|
| ASME B18.3.1M-1986
| 米制凹头带帽螺钉
| (Socket head cap screws (Metric series))
|
| ASME B18.3.3M-1986
| 米制六角凹头有肩螺钉
| (Hexagon socket head shoulder screws (Metric series))
|
| ASME B18.3.4M-1986
| 米制内六角圆头带帽螺钉
| (Hexagon socket button head cap screws (Metric series))
|
| ASME B18.3.5M-1986
| 米制六角凹头沉头螺钉
| (Hexagon socket flat countersunk head cap screws (Metric series))
|
| ASME B18.3.6M-1986
| 米制凹头定位螺钉
| (Metric series socket set screws)
|
| ASME B18.6.1-1981
| 英制木螺钉
| (Wood screws (Inch series))
|
| ASME B18.6.2-1998
| 开槽圆头螺钉、方头定位螺钉和开槽无头定位螺钉(英制系列)
| (Slotted head cap screws, square head set screws, and slotted headless set screws (Inch series))
|
| ASME B18.6.5M-2000
| 米制螺纹形和螺纹自攻丝螺钉
| (Metric thread-forming and thread-cutting tapping screws)
|
| ASME B94.3-1965
| 车床和螺丝车床用指杆切刀
| (Straight cut-off blades for lathes and screw machines)
|
| ASTM A 449a-2007
| 通用最低拉伸强度为120/105/90ksi的热处理钢制六角头螺钉、螺栓和螺柱用标准规范
| Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
|
| ASTM A 574-2004
| 合金钢内六角螺钉标准规范
| Standard Specification for Alloy Steel Socket-Head Cap Screws
|
| ASTM A 574M-2004
| 合金钢内六角螺钉(米制)标准规范
| Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
|
| ASTM A 66-2007
| 钢螺丝钉的标准规范
| Standard Specification for Steel Screw Spikes
|
| ASTM C 1002-2007
| 木销或钢销上石膏板制品或金属灰泥基板用自攻钢螺钉的标准规范
| Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
|
| ASTM C 1513-2004
| 冷成形钢构架连接件用钢自攻螺钉标准规范
| Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
|
| ASTM C 754-2004
| 用螺钉安装石膏墙板的钢框构件安装的标准规范
| Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
|
| ASTM C 954-2007
| 将厚度为0.033英寸至0.112英寸(0.84mm至2.84mm)的石膏板制品或金属灰泥基板安装在钢骨上所用的钻孔钢螺钉的
| Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
|
| ASTM C 955-2006
| 螺钉安装石膏板及金属熟石膏基板用承重(横向及轴向)钢骨、导板、系杆或隔栅撑标准规范
| Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
|
| ASTM F 116-2000
| 医疗用螺丝刀标准规范
| Standard Specification for Medical Screwdriver Bits
|
| ASTM F 2281-2004
| 耐热及高温设备用不锈钢和镍合金螺栓、六角头螺钉和螺柱的标准规范
| Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
|
| ASTM F 2328M-2007
| 淬火和回火的螺纹钢螺栓、螺钉和螺柱的脱碳和渗碳性测定的标准试验方法(米制)
| Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]
|
| ASTM F 2329-2005
| 碳钢和合金钢螺栓、螺钉、垫圈、螺母和特殊螺纹紧固件用热浸镀锌覆层的标准规范
| Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
|
| ASTM F 2403-2006
| 60 000 psi拉伸强力碳钢英制系列机械螺钉的标准规范
| Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
|
| ASTM F 2502-2005
| 内部安装植入物用生物可吸收板和螺钉的标准规范和试验方法
| Standard Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants
|
| ASTM F 468-2006
| 一般用途有色金属螺栓、六角头螺钉及螺柱标准规范
| Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
|
| ASTM F 468M-2006
| 一般用途有色金属螺栓、六角头螺钉及螺柱标准规范(米制)
| Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use [Metric]
|
| ASTM F 543-2007
| 金属医疗骨螺钉的标准规范和试验方法
| Standard Specification and Test Methods for Metallic Medical Bone Screws
|
| ASTM F 593-2002
| 不锈钢螺栓,六角头螺钉及螺柱标准规范
| Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
|
| ASTM F 738M-2002
| 不锈钢米制螺栓、螺钉及螺柱(米制)的标准规范
| Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
|
| ASTM F 788/F 788M-2006
| 英制及米制系列的螺栓、螺钉及螺柱的表面不均匀性的标准规范
| Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
|
| ASTM F 835-2004
| 合金钢凹半圆头及平顶沉头六角螺钉的标准规范
| Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
|
| ASTM F 835M-2004
| 合金钢凹半圆头及平顶沉头六角螺钉(米制)标准规范
| Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
|
| ASTM F 837a-2002
| 不锈钢凹头螺钉螺丝的标准规范
| Standard Specification for Stainless Steel Socket Head Cap Screws
|
| ASTM F 837a-2002
| 不锈钢凹头螺钉螺丝的标准规范
| Standard Specification for Stainless Steel Socket Head Cap Screws
|
| ASTM F 837Ma-2002
| 不锈钢凹头螺钉螺丝的标准规范(米制)
| Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
|
| ASTM F 837Ma-2002
| 不锈钢凹头螺钉螺丝的标准规范(米制)
| Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
|
| ASTM F 879a-2002
| 不锈钢圆头及扁平沉头六角螺钉的标准规范
| Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
|
| ASTM F 879Ma-2002
| 不锈钢圆头及扁平沉头六角螺钉的标准规范(米制)
| Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws [Metric]
|
| ASTM F 880-2002
| 不锈钢凹头定位螺钉标准规范
| Standard Specification for Stainless Steel Socket-Set Screws
|
| ASTM F 880M-2002
| 不锈钢凹头定位螺钉(米制)标准规范
| Standard Specification for Stainless Steel Socket Set Screws [Metric]
|
| ASTM F 912-2004
| 合金钢凹头定位螺钉的标准规范
| Standard Specification for Alloy Steel Socket Set Screws
|
| ASTM F 912M-2004
| 合金钢凹头定位螺钉(米制)的标准规范
| Standard Specification for Alloy Steel Socket Set Screws [Metric]
|
| IEEE C 135.3-2001
| 架空线架设用镀锌铁方头螺钉
| (Zinc-coated ferrous lag screws for overhead line construction)
|
| 编号 | 中文名称 | 英文名称 |
|---|