| 编号 | 中文名称 | 英文名称 |
|---|
| EN 175301-803-1999
| 详细规范：矩形连接器 带不可拆卸锁定螺钉的厚度为0.8mm的偏平接触件
| Detail specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable
|
| EN 20273-1991
| 紧固件 螺栓和螺钉用通孔
| Fasteners; Clearance holes for bolts and screws (ISO 273:1979)
|
| EN 20898-7-1995
| 紧固件机械性能 第7部分：螺栓与螺钉的扭矩试验和最小扭矩公称直径1MM—10MM
| Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm (ISO 898-7:1992)
|
| EN 22568-1989
| 手用和机用圆螺丝板牙和手用板牙架
| Hand- and machine-operated circular screwing dies and hand-operated die stocks (ISO 2568:1988)
|
| EN 24766-1992
| 开槽平端紧定螺钉
| Slotted set screws with flat point (ISO 4766:1983)
|
| EN 26157-1-1991
| 紧固件 表面缺陷 第1部分：螺栓、螺钉和螺柱一般要求
| Fasteners; surface discontinuities; Part 1: Bolts, srews and studs for general requirements (ISO 6157-1:1988)
|
| EN 26157-3-1991
| 紧固件 表面缺陷 第3部分：螺栓、螺钉和螺柱的特殊要求
| Fasteners; surface discontinuities; part 3: bolts, srews and studs for special requirements (ISO 6157-3:1988)
|
| EN 2649-1995
| 航空航天系列 镀镉合金钢头全螺纹的盘形头有槽螺钉 等级：900MPa(环境温度)/235℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃
|
| EN 2650-1996
| 航空航天系列 钝化耐蚀钢制全螺纹盘形头有槽螺钉 等级：600 MPa(环境温度)/425℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃
|
| EN 2651-1996
| 航空航天系列 镀锡黄铜全螺纹带槽盘形头螺钉 等级：380MPa(环境温度)/80℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80℃
|
| EN 2652-1997
| 航空航天系列 镀镉合金钢100°普通埋头全螺纹有槽螺钉 等级：900MPa(环境温度)/235℃
| Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification ： 900 MPa (at ambient temperature)/235℃
|
| EN 2653-1996
| 航空航天系列 钝化耐蚀钢制100度普通埋头螺丝 等级：600 MPa(环境温度)/425℃
| Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425℃
|
| EN 2654-1996
| 航空航天系列 镀锡黄铜全螺纹带槽100°普通埋头螺钉 等级：380MPa(环境温度)/ 80℃
| Aerospace series - Screws, 100°countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80℃
|
| EN 27434-1992
| 开槽锥端紧定螺钉
| Slotted set screws with cone point (ISO 7434:1983)
|
| EN 27435-1992
| 开槽长圆柱端紧定螺钉
| Slotted set screws with long dog point (ISO 7435:1983)
|
| EN 27436-1992
| 开槽凹端紧定螺钉
| Slotted set screws with cup point (ISO 7436:1983)
|
| EN 27721-1991
| 沉头螺钉 头部形状和测量
| Countersunk head screws; Head configuration and gauging (ISO 7721:1983)
|
| EN 28839-1991
| 紧固件机械性能 有色金属制造螺栓、螺钉、螺柱和螺母
| Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals (ISO 8839:1986)
|
| EN 2884-1996
| 航空航天系列 用MoS2润滑阳极氧化钛合金制短螺纹松公差普通柄偏置十字盘形头凹槽螺钉 等级：1100 MPa (环
| Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 2885-1996
| 航空航天系列 镀镉合金钢制短螺纹松公差退柄偏置十字盘头凹槽螺钉 等级：900MPa(环境温度)/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃
|
| EN 2886-1996
| 航空航天系列 镀镉合金钢偏置十字凹槽紧公差普通柄短螺纹螺钉 等级： 900MPa(环境温度)/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235℃
|
| EN 2897-1996
| 航空航天系列 镀镉合金钢制盘头偏置十字凹槽紧公差普通柄短螺纹螺钉 等级：1100MPa(环境温度)/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 ℃
|
| EN 2926-1996
| 航空航天系列 FE-FA92HT(A286)耐热钢制镀银长螺纹细柄双六角头螺钉 等级： 900 MPa(环境温度)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 2927-1996
| 航空航天系列 NI-P100HT(Inconel 718)耐热镍基合金制长螺纹细柄双六角头螺钉 等级：1275 MPa(环境温度)/6
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650℃
|
| EN 2928-1996
| 航空航天系列 NI-P100HT(Inconel 718)耐热镍基合金制镀银长螺纹细柄双六角头螺钉 等级：1275 MPa(环境温
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650℃
|
| EN 2929-1996
| 航空航天系列 NI-P100HT(一种耐热镍基合金)耐热镍基合金制长螺纹细柄双六角头螺钉 等级：1210 MPa(环境温
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 ℃
|
| EN 2930-1996
| 航空航天系列 NI-P101HT(Waspaloy 一种耐高温热镍基合金)耐热镍基合金镀银长螺纹细柄双六角头螺钉 等级：
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperature)/730 ℃
|
| EN 2937-1994
| 航空航天系列 FE-PA92HT(A286)耐热钢全螺纹六角头螺钉 等级：900MPa(环境温度) 650℃
| Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 2938-1995
| 航空航天系列 镀银FE-PA92HT(A286)耐热钢制全螺纹六角头螺钉 等级：900MPa(环境温度)/650℃
| Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 2939-1994
| 航空航天系列 FE-PA92HT(A 286)耐热钢100度埋头偏置十字凹槽全螺纹螺钉 等级：900MPa(环境温度)/650C°
| Aerospace series - Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 2940-1995
| 航空航天系列 镀银FE-PA92HT(A286)耐热钢制全螺纹偏置十字凹槽100度沉头螺钉 等级：900 MPa(环境温度)/65
| Aerospace series - Screws, 100°countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 ℃
|
| EN 3007-1996
| 航空航天系列 镀银FE-PA92HT(A286)耐热钢制长螺纹细柄六角头螺钉 等级：900MPa (环境温度)/650℃
| Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silv0er plated - Classification: 900 MPa (at ambient temperature)/650℃
|
| EN 3035-1996
| 航空航天系列 合金钢镀镉短螺纹紧公差普通柄偏置十字凹槽的100°标准埋头螺钉 等级：1100MPa(环境温度)/2
| Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃
|
| EN 3037-1996
| 航空航天系列 阳极氧化MoS2润滑钛合金短螺纹紧公差普通柄偏置十字凹槽盘头螺钉 等级：1100MPa(环境温度)/
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3038-1996
| 航空航天系列 钝化耐热耐腐蚀钢制短螺纹紧公差普通柄偏置十字凹槽盘头螺钉 等级：1100MPa(环境温度)/425
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| EN 320-1993
| 纤维板 抗螺钉轴向拔出力的测定
| Fibreboards - Determination of resistance to axial withdrawal of screws
|
| EN 3303-1997
| 航空航天系列 镀镉合金钢六角凹头粗公差普通柄中等长度螺纹帽螺钉 等级：1100MPa(环境温度)/235℃
| Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃
|
| EN 3304-1996
| 航空航天系列 氧极氧化钛合金MoS2润滑短螺纹紧公差普通柄偏置十字凹槽100°埋头矮头螺钉 等级：1100MPa(
| Aerospace series - Screws, 100°countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3305-1996
| 航空航天系列 镀镉合金钢短螺纹紧公差普通柄偏置十字凹槽100°埋头矮头螺钉 等级：1100MPa(环境温度)/235
| Aerospace series - Screws, 100°countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235℃
|
| EN 3306-1996
| 航空航天系列 阳极氧化MoS2润滑钛合金钢制100度埋头标准头谝置十字凹槽全螺纹螺丝 等级：1100MPa(环境温
| Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3307-1996
| 航空航天系列 阳极氧化钛合金MoS2润滑全螺纹偏置十字凹槽盘头螺钉 等级：1100 MPa(环境温度)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3308-1996
| 航空航天系列 阳极氧化MoS2润滑钛合金钢制标准六角头全螺纹螺丝 等级：1100MPa(环境温度)/315℃
| Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 ℃
|
| EN 3381-1996
| 航空航天系列 阳极氧化MoS2润滑钛金属制100度埋头标准头偏置十字凹槽紧公差普通柄短螺纹螺钉 等级：1100M
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315℃
|
| EN 3543-1997
| 航空航天系列 钝化耐热及耐腐蚀钢制100°埋头标准头偏置十字凹槽紧公差普通杆短螺纹螺钉 等级：1100MPa(
| Aerospace series - Screws, 100°countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| EN 3759-1996
| 航空航天系列 钝化耐热耐腐蚀钢制全加螺纹的偏十字形槽盘头螺钉 等级：1100 MPa(环境温度)/425℃
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| EN 3760-1996
| 航空航天系列 钝化耐热耐腐蚀钢制全螺纹的偏十字形槽100°埋头标准头螺钉 等级：1100MPa(环境温度)/425℃
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| EN 4323-2003
| 航空航天系列 TI-P640001阳极氧化 MoS<(Index)2>涂层制钛合金 １００°埋头六角形凹槽全螺纹螺钉 等级
| Aerospace series - Screws, 100?countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350℃ / Note: To be replaced by prEN 4323 (2003-05).
|
| EN 60998-2-2-1993
| 家用和类似用途低压电路连接器件 第2-2部分：作为带有无螺丝型的夹紧器件的独立单元的连接器件的特别要求
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:1991)
|
| EN 60999-2-2003
| 连接器件 电铜导体 有螺钉和无螺钉型的线夹装置的安全要求 第2部分：35mm至300mm导线线夹装置的特殊要求
| Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm<(hoch)2> up to 300 mm<(hoch)2> (included) (IEC 60999-2
|
| EN ISO 10510-1999
| 自攻螺钉和平垫圈组合件
| Tapping screw and washer assemblies with plain washers (ISO 10510:1999)
|
| EN ISO 10642-1997
| 内六角孔沉头螺钉
| Hexagon socket countersunk head screws (ISO 10642:1997)
|
| EN ISO 10644-1998
| 螺钉和平垫圈组合件 垫圈硬度等级200HV和300HV
| Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:1998)
|
| EN ISO 10664-1999
| 螺栓和螺钉用内板拧的六角花形
| Hexalobular internal driving feature for bolts and screws (ISO 10664:1999)
|
| EN ISO 10666-1999
| 自钻自攻螺钉 机械和功能性能
| Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999)
|
| EN ISO 10669-1999
| 自攻螺钉和垫圈组合件用平垫圈 标准和大系列 产品等级A级
| Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999)
|
| EN ISO 10673-1998
| 螺钉和垫圈组合件用平垫圈 小、标准和大系列 产品等级A级
| Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:1998)
|
| EN ISO 1207-1994
| 开槽圆柱螺钉 产品等级A级
| Slotted cheese head screws - Product grade A (ISO 1207:1992)
|
| EN ISO 14579-2001
| 内六角头螺钉
| Hexalobular socket head cap screws (ISO 14579:2001)
|
| EN ISO 14580-2001
| 内六角圆头螺钉
| Hexalobular socket cheese head screws (ISO 14580:2001)
|
| EN ISO 14583-2001
| 内六角大柱头螺钉
| Hexalobular socket pan head screws (ISO 14583:2001)
|
| EN ISO 14584-2001
| 内六角半沉头螺钉
| Hexalobular socket raised countersunk head screws (ISO 14584:2001)
|
| EN ISO 14585-2001
| 内六角大柱头自攻螺钉
| Hexalobular socket pan head tapping screws (ISO 14585:2001)
|
| EN ISO 14586-2001
| 内六角沉头自攻螺钉
| Hexalobular socket countersunk head tapping screws (ISO 14586:2001)
|
| EN ISO 14587-2001
| 内六角半沉头(椭圆形)自攻螺钉
| Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001)
|
| EN ISO 1478-1999
| 自攻螺钉用螺纹
| Tapping screw thread (ISO 1478:1999)
|
| EN ISO 1479-1994
| 六角头自攻螺钉
| Hexagon head tapping screws (ISO 1479:1983)
|
| EN ISO 1481-1994
| 开槽盘头自攻螺钉
| Slotted pan head tapping screws (ISO 1481:1983)
|
| EN ISO 1482-1994
| 开槽沉头自攻螺钉（通用头型）
| Slotted countersunk (flat) head tapping screws (common head style) (ISO 1482:1983)
|
| EN ISO 1483-1994
| 开槽半沉头自攻螺钉（通用头型）
| Slotted raised countersunk (oval) head tapping screws (common head style) (ISO 1483:1983)
|
| EN ISO 15480-1999
| 六角凸缘头自钻自攻螺钉
| Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999)
|
| EN ISO 15481-1999
| 十字槽盘头自钻自攻螺钉
| Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
|
| EN ISO 15482-1999
| 十字槽沉头自钻自攻螺钉
| Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999)
|
| EN ISO 15483-1999
| 十字槽半沉头自钻自攻螺钉
| Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999)
|
| EN ISO 1580-1994
| 开槽盘头螺钉 产品等级A级
| Slotted pan head screws - Product grade A (ISO 1580:1994)
|
| EN ISO 2009-1994
| 开槽沉头螺钉(通用头型) 产品等级A
| Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994)
|
| EN ISO 2010-1994
| 开槽半沉头螺钉(通用头型) 产品等级A
| Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994)
|
| EN ISO 2702-1994
| 热处理钢自攻螺钉 机械性能
| Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992)
|
| EN ISO 3506-1-1997
| 耐腐蚀不锈钢紧固件的机械性能 第1部分：螺栓、螺钉和螺柱
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997)
|
| EN ISO 3506-3-1997
| 耐腐蚀不锈钢紧固件的机械性能 第3部分：紧定螺钉及类似的不受应力的螺纹紧固件
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997)
|
| EN ISO 3506-4-2003
| 耐腐蚀不锈钢紧固件的机械性能 第4部分：自攻螺钉
| Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003)
|
| EN ISO 4017-2000
| 六角头螺钉 产品等级A和B级
| Hexagon head screws - Product grades A and B (ISO 4017:1999)
|
| EN ISO 4018-2000
| 六角头螺钉 产品等级C级
| Hexagon head screws - Product grade C (ISO 4018:1999)
|
| EN ISO 4757-1994
| 螺钉用十字槽
| Cross recesses for screws (ISO 4757:1983)
|
| EN ISO 4759-1-2000
| 紧固件公差 第1部分：螺栓、螺钉、螺柱和螺母 产品等级A、B和C级
| Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; product grades A, B and C (ISO 4759-1:2000)
|
| EN ISO 4759-3-2000
| 紧固件公差 第3部分：螺栓、螺钉和螺母用平垫圈 产品等级A和C级
| Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C (ISO 4759-3:2000)
|
| EN ISO 4762-1997
| 内六角圆柱头螺钉
| Hexagon socket head cap screws (ISO 4762:1997)
|
| EN ISO 6410-1-1996
| 技术制图 螺钉和螺纹部件 第1部分：通用规范
| Technical drawings - Screw threads and threaded parts - Part 1: General conventions (ISO 6410-1:1993)
|
| EN ISO 6410-2-1996
| 技术制图 螺钉和螺纹部件 第2部分：螺蚊嵌镶件
| Technical drawings - Screw threads and threaded parts - Part 2: Screw thread inserts (ISO 6410-2:1993)
|
| EN ISO 6410-3-1996
| 技术制图 螺钉和螺纹部件 第3部分：简化表示
| Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation (ISO 6410-3:1993)
|
| EN ISO 6789-2003
| 螺钉和螺母装配工具 手动扭矩工具 设计的一致性试验、质量的一致性试验和重新校准程序的条件和试验方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003)
|
| EN ISO 7045-1994
| Ｈ或Ｚ型十字槽盘头螺钉 产品等级A级
| Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994)
|
| EN ISO 7046-1-1994
| Ｈ或Ｚ型十字槽沉头(通用头型)螺钉 产品等级A级 第1部分：性能等级 钢4.8级
| Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:1994)
|
| EN ISO 7046-2-1994
| 十字槽沉头(通用头型)螺钉 产品等级A级 第2部分：性能等级 钢8.8级、不锈钢和有色金属
| Cross recessed countersunk flat head screws (common head style) - Grade A - Part 2: Steel of property class 8.8, stainless steel and non-ferrous metals (ISO 7046-2:1990)
|
| EN ISO 7047-1994
| Ｈ或Ｚ型十字槽半沉头(通用头型)螺钉 产品等级A级
| Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994)
|
| EN ISO 7048-1998
| 十字槽圆柱头螺钉
| Cross recessed cheese head screws (ISO 7048:1998)
|
| EN ISO 7049-1994
| 十字槽盘头自攻螺钉
| Cross recessed pan head tapping screws (ISO 7049:1983)
|
| EN ISO 7050-1994
| 十字槽沉头(通用头型)自攻螺钉
| Cross recessed countersunk (flat) head tapping screws (common head style) (ISO 7050:1983)
|
| EN ISO 7051-1994
| 十字槽半沉头(通用头型)自攻螺钉
| Cross recessed raised countersunk (oval) head tapping screws (ISO 7051:1983)
|
| EN ISO 7085-1999
| 表面淬硬并回火的米制自挤螺钉机械和工作性能要求
| Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999)
|
| EN ISO 7380-1997
| 内六角平圆头螺钉
| Hexagon socket button head screws (ISO 7380:1997)
|
| EN ISO 7721-2-1994
| 沉头螺钉 第2部分：十字槽插入深度
| Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990)
|
| EN ISO 8662-7-1997
| 便携式手提动力工具 手柄振动测量 第7部分：具有冲击、脉冲或棘轮作用力的扳手、螺丝刀和拧螺母机
| Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997)
|
| EN ISO 8676-2000
| 米制细牙六角头螺钉 产品等级A和B级
| Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999)
|
| EN ISO 887-2000
| 米制普通螺栓、螺钉和螺母用平垫圈 总方案
| Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000)
|
| EN ISO 898-1-1999
| 碳钢和铸钢铸造的紧固件机械性能 第1部分：螺栓、螺钉和螺柱
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999)
|
| EN ISO 898-5-1998
| 碳钢和铸钢铸造的紧固件机械性能 第5部分：紧定螺钉及类似的不受拉应力的螺纹紧固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses (ISO 898-5:1998)
|
| EN ISO 9173-1-1995
| 拔牙钳 第1部分：螺钉和铰链接合型
| Dental extraction forceps - Part 1: Screw and pin joint types (ISO 9173-1:1991)
|
| prEN 14399-4-2002
| 预加载高强度结构螺钉 第4部分：HV系统 六角螺栓和螺母的装配件
| High-strength structural bolting for preloading - Part 4: System HV; Hexagon bolt and nut assemblies
|
| prEN 14399-5-2002
| 预加载高强度结构螺钉 第5部分：HR系统用普通平垫圈
| High-strength structural bolting for preloading - Part 5: Plain washers for system HR
|
| prEN 14399-6-2002
| 预加载高强度结构螺钉 第6部分HR和HV系统用普通斜角垫圈
| High-strength structural bolting for preloading - Part 6: Plain chamfered washers for systems HR and HV
|
| prEN 2591-423-2001
| 航空航天系列 光电连接元件 试验方法 第423部分：连接器背面附件螺丝强度 注与EN 2591-100结合使用
| Aerospace series - Elements of electrical and optical connection; Test methods - Part 423: Connector rear accessories thread strength / Note: Applies in conjunction with EN 2591-100
|
| prEN 4072-1999
| 航空航天系列 铝 IVD涂层钛合金、100°埋头标准头偏十字凹槽紧公差普通柄短螺纹螺钉 等级：1100 MPa(环境
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425℃
|
| prEN 4303-1999
| 航空航天系列 钝化耐腐蚀钢(0,25 mm 壁厚)制埋头的拉紧螺钉用套筒
| Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
|
| prEN 4306-1999
| 航空航天系列 钝化耐腐蚀钢(0,50 mm 壁厚)、带埋头拉紧螺钉用套筒
| Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
|
| prEN 4496-1999
| 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字形埋头100度 标准头螺钉 等级：1100 MPa (环
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4497-1999
| 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字口锥形头螺钉 等级：1100 MPa (环境温度下)/31
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4499-1999
| 航空航天系列 铝涂层阳极氧化钛合金紧公差标准体短螺纹十字口矮头埋头100度螺钉 等级：1100 MPa (环境温
| Aerospace series - Screws, 100?countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 4509-1999
| 航空航天系列 铝涂层阳极氧化钛合金全螺纹十字口埋头100度 标准螺钉 等级：1100 MPa (环境温度下)/315℃
| Aerospace series - Screws, 100?countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315℃
|
| prEN 60998-2-2-2003
| 家用和类似用途低压电路连接器件 第２－２部分：作为带有无螺丝型的夹紧器件的独立单元的连接器件的特别要
| Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units (IEC 60998-2-2:2002, modified) / Note: Intended as replaceme
|
| 编号 | 中文名称 | 英文名称 |
|---|