| 编号 | 中文名称 | 英文名称 |
|---|
| DL/T 682-1999
| 母线金具用沉头螺钉
| ()
|
| FZ/T 90027-1991
| 装螺栓螺钉用的冲孔尺寸
| ()
|
| FZ/T 90028-1991
| 轴上紧定螺钉用的孔尺寸
| ()
|
| FZ/T 90075-1995
| 轴上紧定螺钉用的平台 尺寸
| ()
|
| GB 3883.2-2005
| 手持式电动工具的安全第二部分:螺丝刀和冲击扳手的专用要求
| Safety of hand-held motor-operated electric tools Part 2:Particular requirements for screwdrivers and impact wrenches
|
| GB/T 100-1986
| 开槽沉头木螺钉
| Slotted countersunk head wood screws
|
| GB/T 101-1986
| 开槽半沉头木螺钉
| Slotted raised countersunk head wood screws
|
| GB/T 102-1986
| 六角头木螺钉
| Hexagon head wood screws
|
| GB/T 10635-2003
| 螺钉旋具通用技术条件
| Screwdrivers--General technical requirements
|
| GB/T 13806.1-1992
| 精密机械用紧固件十字槽螺钉
| Fasteners for fine mechanics--Cross recessed screws
|
| GB/T 13806.2-1992
| 精密机械用紧固件十字槽自攻螺钉刮削端
| Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point
|
| GB/T 14210-1993
| 墙板自攻螺钉
| Dry wall screws
|
| GB/T 15856.1-2002
| 十字槽盘头自钻自攻螺钉
| Cross recessed pan head drilling screws with tapping screw thread
|
| GB/T 15856.2-2002
| 十字槽沉头自钻自攻螺钉
| Cross recessed countersunk head drilling screws
|
| GB/T 15856.3-2002
| 十字槽半沉头自钻自攻螺钉
| Cross recessed raised countersunk head drilling screws with tapping screw thread
|
| GB/T 15856.4-2002
| 六角法兰面自钻自攻螺钉
| Hexagon flange head drilling screws with tapping screw thread
|
| GB/T 15856.5-2002
| 六角凸缘自钻自攻螺钉
| Hexagon washer head drilling screws
|
| GB/T 16824.1-1997
| 六角凸缘自攻螺钉
| Hexagon head tapping screws with collar
|
| GB/T 16824.2-1997
| 六角法兰面自攻螺钉
| Hexagon flange head tapping screws
|
| GB/T 16938-1997
| 紧固件螺栓、螺钉、螺柱和螺母通用技术条件
| Fasteners--General requirements for bolts，screws，studs and nuts
|
| GB/T 2670.1-2004
| 内六角花形盘头自攻螺钉
| Hexalobular socket pan head tapping screws
|
| GB/T 2670.2-2004
| 内六角花形沉头自攻螺钉
| Hexalobular socket countersunk head tapping screws
|
| GB/T 2670.3-2004
| 内六角花形半沉头自攻螺钉
| Hexalobular socket raised countersunk(oval)head tapping screws
|
| GB/T 2671.1-2004
| 内六角花形低圆柱头螺钉
| Hexalobular socket cheese(short)head screws
|
| GB/T 2671.2-2004
| 内六角花形圆柱头螺钉
| Hexalobular socket head cap screws
|
| GB/T 2672-2004
| 内六角花形盘头螺钉
| Hexalobular socket pan head screws
|
| GB/T 2673-2007
| 内六角花形沉头螺钉
| hexalobular socket countersunk head screws
|
| GB/T 2674-2004
| 内六角花形半沉头螺钉
| Hexalobular socket raised countersunk head screws
|
| GB/T 3098.1-2000
| 紧固件机械性能螺栓、螺钉和螺柱
| Mechanical properties of fasteners--Bolts，screws and studs
|
| GB/T 3098.10-1993
| 紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母
| Mechanical properties of fasteners--Bolts，screws，studs and nuts made of non-ferrous metals
|
| GB/T 3098.11-2002
| 紧固件机械性能自钻自攻螺钉
| Mechanical properties of fasteners--Drilling screws with tapping screw thread
|
| GB/T 3098.13-1996
| 紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm
| Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm
|
| GB/T 3098.16-2000
| 紧固件机械性能不锈钢紧定螺钉
| Mechanical properties of fasteners--Setscrews made of stainless-steel
|
| GB/T 3098.3-2000
| 紧固件机械性能紧定螺钉
| Mechanical properties of fasteners--Set screws
|
| GB/T 3098.5-2000
| 紧固件机械性能自攻螺钉
| Mechanical properties of fasteners--Tapping screws
|
| GB/T 3098.6-2000
| 紧固件机械性能不锈钢螺栓、螺钉和螺柱
| Mechanical properties of fasteners--Bolts，screws and studs made of stainless-steel
|
| GB/T 3098.7-2000
| 紧固件机械性能自挤螺钉
| Mechanical properties of fasteners--Thread rolling screws
|
| GB/T 3099-1982
| 螺栓、螺钉、螺母及附件名词术语
| Bolts，screws，nuts and accessories--Terminology and nomenclature
|
| GB/T 3103.1-2002
| 紧固件公差螺栓、螺钉、螺柱和螺母
| Tolerances for fasteners--Bolts，screws，studs and nuts
|
| GB/T 3103.2-1982
| 紧固件公差用于精密机械的螺栓、螺钉和螺母
| Tolerances for fasteners--Bolts，screws and nuts for fine mechanics
|
| GB/T 3105-2002
| 普通螺栓和螺钉头下圆角半径
| General purpose bolts and screws--Radii under the head
|
| GB/T 3106-1982
| 螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度
| Bolts，screws and studs--Nominal lengths，and thread lengths for general purpose bolts
|
| GB/T 3229-2000
| 螺栓螺钉用装配工具机动螺刀头的六角传动端
| Assembly tools for bolts and screws--Hexagon drive ends for machine-operated screw driver bits
|
| GB/T 4389-1995
| 螺钉与螺母的装配工具双头呆扳手、双头梅花扳手、两用扳手头部外形的最大尺寸
| Assembly tool for screws and nuts--Open-end double-head engineers wrenches，doublehead box wrenches and combination wrenches--Maximum outside dimensions of heads
|
| GB/T 4625-1998
| 螺钉和螺母的装配工具术语
| Assembly tools for screws and nuts--Nomenclature
|
| GB/T 5276-1985
| 紧固件螺栓、螺钉、螺柱及螺母尺寸代号和标注
| Fasteners--Bolts，screws，studs and nuts--Symbols and designations of dimensions
|
| GB/T 5277-1985
| 紧固件螺栓和螺钉通孔
| Fasteners--Clearance holes for bolts and screws
|
| GB/T 5279-1985
| 沉头螺钉头部形状和测量
| Countersunk head screws--Head configuration and gauging
|
| GB/T 5279.2-1997
| 沉头螺钉第2部分:十字槽插入深度
| Countersunk flat head screws--Part 2:Penetration depth of cross recesses
|
| GB/T 5280-2002
| 自攻螺钉用螺纹
| Tapping screws thread
|
| GB/T 5281-1985
| 内六角圆柱头轴肩螺钉
| Hexagon socket head shoulder screws
|
| GB/T 5282-1985
| 开槽盘头自攻螺钉
| Slotted pan head tapping screws
|
| GB/T 5283-1985
| 开槽沉头自攻螺钉
| Slotted countersunk head tapping screws
|
| GB/T 5284-1985
| 开槽半沉头自攻螺钉
| Slotted raised countersunk head tapping screws
|
| GB/T 5285-1985
| 六角头自攻螺钉
| Hexagon head tapping screws
|
| GB/T 5286-2001
| 螺栓、螺钉和螺母用平垫圈总方案
| Plain washers for bolts，screws and nuts--General plan
|
| GB/T 5358-1998
| 内六角花形螺钉旋具
| Hexagon spline screwdrivers
|
| GB/T 5779.1-2000
| 紧固件表面缺陷螺栓、螺钉和螺柱一般要求
| Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements
|
| GB/T 5779.3-2000
| 紧固件表面缺陷螺栓、螺钉和螺柱特殊要求
| Fasteners--Surface discontinuities--Bolts，screws and studs for special requirements
|
| GB/T 6188-2000
| 螺栓和螺钉用内六角花形
| Hexalobular internal driving feature for bolts and screws
|
| GB/T 65-2000
| 开槽圆柱头螺钉
| Slotted cheese head screws
|
| GB/T 6559-1986
| 自攻锁紧螺钉的螺杆粗牙普通螺纹系列
| Screw thread shanks for thread forming screw--Metric coarse thread series
|
| GB/T 6560-1986
| 十字槽盘头自攻锁紧螺钉
| Cross recessed pan head thread forming screws
|
| GB/T 6561-1986
| 十字槽沉头自攻锁紧螺钉
| Cross recessed countersunk head thread forming screws
|
| GB/T 6562-1986
| 十字槽半沉头自攻锁紧螺钉
| Cross recessed raised countersunk head threadforming screws
|
| GB/T 6563-1986
| 六角头自攻锁紧螺钉
| Hexagon head thread forming screws
|
| GB/T 6564-1986
| 内六角花形圆柱头自攻锁紧螺钉
| Hexagon lobular socket thread forming screws
|
| GB/T 67-2000
| 开槽盘头螺钉
| Slotted pan head screws
|
| GB/T 68-2000
| 开槽沉头螺钉
| Slotted countersunk flat head screws(common head style)
|
| GB/T 69-2000
| 开槽半沉头螺钉
| Countersunk slotted raised head screws(common head style)
|
| GB/T 70.1-2000
| 内六角圆柱头螺钉
| Hexagon socket head cap screws
|
| GB/T 70.2-2000
| 内六角平圆头螺钉
| Hexagon socket button head screws
|
| GB/T 70.3-2000
| 内六角沉头螺钉
| Hexagon socket countersunk head screws
|
| GB/T 71-1985
| 开槽锥端紧定螺钉
| Slotted set screws with cone point
|
| GB/T 72-1988
| 开槽锥端定位螺钉
| Slotted set screws with cone point
|
| GB/T 73-1985
| 开槽平端紧定螺钉
| Slotted set screws with flat point
|
| GB/T 74-1985
| 开槽凹端紧定螺钉
| Slotted set screws with cup point
|
| GB/T 75-1985
| 开槽长圆柱端紧定螺钉
| Slotted set screws with long dog point
|
| GB/T 77-2007
| 内六角平端紧定螺钉
| Hexagon socket set screws with flat point
|
| GB/T 78-2007
| 内六角锥端紧定螺钉
| Hexagon socket set screws with cone point
|
| GB/T 79-2007
| 内六角圆柱端紧定螺钉
| Hexagon socket set screws with dog point
|
| GB/T 80-2007
| 内六角凹端紧定螺钉
| hexagon socket set screws with cup point
|
| GB/T 818-2000
| 十字槽盘头螺钉
| Pan head screws with cross recess
|
| GB/T 819.1-2000
| 十字槽沉头螺钉第1部分:钢4.8级
| Countersunk flat head screws(common head style)with cross recess--Part 1:Steel of property class 4.8
|
| GB/T 819.2-1997
| 十字槽沉头螺钉第2部分:钢8.8、不锈钢A2-70和有色金属CU2或CU3
| Cross recessed countersunk flat head screws(common head style)--Grade A--Part 2:Steel ofproperty class 8.8，stainless steel and non-ferrous metals
|
| GB/T 820-2000
| 十字槽半沉头螺钉
| Countersunk raised head screws (common head style) with cross recess
|
| GB/T 821-1988
| 方头倒角端紧定螺钉
| Square set screws with chamfered end
|
| GB/T 822-2000
| 十字槽圆柱头螺钉
| Cheese head screws with cross recess
|
| GB/T 825-1988
| 吊环螺钉
| Eyebolts
|
| GB/T 828-1988
| 开槽盘头定位螺钉
| Slotted pan head set screws with dog point
|
| GB/T 829-1988
| 开槽圆柱端定位螺钉
| Slotted set screws with dog point
|
| GB/T 83-1988
| 方头长圆柱球面端紧定螺钉
| Square set screws with long dog point and rounded end
|
| GB/T 830-1988
| 开槽圆柱头轴位螺钉
| Slotted cheese head screws with shoulder
|
| GB/T 831-1988
| 开槽无头轴位螺钉
| Slotted shoulder screws
|
| GB/T 832-1988
| 开槽带孔球面圆柱头螺钉
| Slotted cap stan screws
|
| GB/T 833-1988
| 开槽大圆柱头螺钉
| Slotted large cheese head screws
|
| GB/T 834-1988
| 滚花高头螺钉
| Knurled thumb screws
|
| GB/T 835-1988
| 滚花平头螺钉
| Knurled screws
|
| GB/T 836-1988
| 滚花小头螺钉
| Knurled screws with small head
|
| GB/T 837-1988
| 开槽盘头不脱出螺钉
| Slotted pan head screws with waisted shank
|
| GB/T 838-1988
| 六角头不脱出螺钉
| Hexagon screws with waisted shank
|
| GB/T 839-1988
| 滚花头不脱出螺钉
| Knurled thumb screws with waisted shank
|
| GB/T 84-1988
| 方头凹端紧定螺钉
| Square set screws with cup point
|
| GB/T 840-1988
| 塑料滚花头螺钉
| Plastic diamond knurlhead screws
|
| GB/T 845-1985
| 十字槽盘头自攻螺钉
| Cross recessed pan head tapping screws
|
| GB/T 846-1985
| 十字槽沉头自攻螺钉
| Cross recessed countersunk head tapping screws
|
| GB/T 847-1985
| 十字槽半沉头自攻螺钉
| Cross recessed raised countersunk head tapping screws
|
| GB/T 85-1988
| 方头长圆柱端紧定螺钉
| Square set screws with long dog point
|
| GB/T 86-1988
| 方头短圆柱锥端紧定螺钉
| Square set screws with short dog point and coneend
|
| GB/T 878-2007
| 开槽无头螺钉
| Slotted headless screws with shank
|
| GB/T 884-1986
| 螺钉锁紧挡圈
| Lock ring with screw
|
| GB/T 885-1986
| 带锁圈的螺钉锁紧挡圈
| Lock rings with screw and circlip
|
| GB/T 891-1986
| 螺钉紧固轴端挡圈
| Lock rings at the end of shaft with screw
|
| GB/T 9074.1-2002
| 螺栓或螺钉和平垫圈组合件
| Bolt or screw and washer assemblies with plain washers
|
| GB/T 9074.10-1988
| 十字槽半沉头螺钉和锥形锁紧垫圈组合件
| Cross recessed raised countersunkhead screw and countersunk external toothed lock washer assemblies
|
| GB/T 9074.18-2002
| 自攻螺钉和平垫圈组合件
| Tapping screw and washer assemblies with plain washers
|
| GB/T 9074.2-1988
| 十字槽盘头螺钉和外锯齿锁紧垫圈组合件
| Cross recessed pan head screw andserrated lock washer external teeth assemblies
|
| GB/T 9074.20-2004
| 十字槽凹穴六角头自攻螺钉和平垫圈组合件
| Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers
|
| GB/T 9074.3-1988
| 十字槽盘头螺钉和弹簧垫圈组合件
| Cross recessed pan head screw and single coil spring lock washer assemblies
|
| GB/T 9074.4-1988
| 十字槽盘头螺钉，弹簧垫圈和平垫圈组合件
| Cross recessed pan head screw，single coil spring lock washer and plain washer assemblies
|
| GB/T 9074.5-2004
| 十字槽小盘头螺钉和平垫圈组合件
| Cross recessed small pan head screw andwasher assemblies with plain washers
|
| GB/T 9074.7-1988
| 十字槽小盘头螺钉和弹簧垫圈组合件
| Cross recessed small pan head screw and single coil spring lock washer assemblies
|
| GB/T 9074.8-1988
| 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件
| Cross recessed small pan headscrew，single coil spring lock washer and plain washer assemblies
|
| GB/T 9074.9-1988
| 十字槽沉头螺钉和锥形锁紧垫圈组合件
| Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
|
| GB/T 922-1986
| 木螺钉技术条件
| Specifications for wood screws
|
| GB/T 944.1-1985
| 螺钉用十字槽
| Cross recesses for screws
|
| GB/T 9456-1988
| 十字槽凹穴六角自攻螺钉
| Cross recessed hexagon head tapping screws withindentation
|
| GB/T 946-1988
| 开槽球面圆柱头轴位螺钉
| Slotted raised cheese head screws with shoulder
|
| GB/T 947-1988
| 开槽球面大圆柱头螺钉
| Slotted large raised cheese head screws
|
| GB/T 948-1988
| 开槽沉头不脱出螺钉
| Slotted countersunk head screws with waisted shank
|
| GB/T 949-1988
| 开槽半沉头不脱出螺钉
| Slotted raised countersunk head screws with waisted shank
|
| GB/T 950-1986
| 十字槽圆头木螺钉
| Cross recessed round head wood screws
|
| GB/T 951-1986
| 十字槽沉头木螺钉
| Cross recessed countersunk head wood screws
|
| GB/T 952-1986
| 十字槽半沉头木螺钉
| Cross recessed raised countersunk head wood screws
|
| GB/T 97.4-2002
| 平垫圈用于螺钉和垫圈组合件
| Plain washers for screw and washer assemblies
|
| GB/T 97.5-2002
| 平垫圈用于自攻螺钉和垫圈组合件
| Plain washers for tapping sew and washer assemblies
|
| GB/T 99-1986
| 开槽圆头木螺钉
| Slotted round head wood screws
|
| JB/T 10108-1999
| 电动螺丝刀
| ()
|
| JB/T 10652-2006
| 轮式拖拉机轮毂螺栓、车轮螺钉和螺母 技术条件
| Wheeled tractor-Hub bolts,wheel screws and nuts-Specifications
|
| JB/T 2703-1999
| 微型永磁直流螺丝刀
| ()
|
| JB/T 3411.126-1999
| 端铣刀杆螺钉 尺寸
| ()
|
| JB/T 3411.127-1999
| 端铣刀杆螺钉扳手 尺寸
| ()
|
| JB/T 3411.16-1999
| 内四方紧定螺钉 尺寸
| ()
|
| JB/T 3411.90-1999
| 定心圆锥螺钉 尺寸
| ()
|
| JB/T 3926.12-1999
| 垂直斗式提升机 胶带螺钉参数尺寸
| ()
|
| JB/T 4211.1-1996
| 冷镦螺钉模具终镦 冲头 A型
| ()
|
| JB/T 4211.10-1996
| 冷镦螺钉模具 凹模 B型
| ()
|
| JB/T 4211.11-1996
| 冷镦螺钉模具 凹模 C型
| ()
|
| JB/T 4211.12-1996
| 冷镦螺钉模具 凹模 D型
| ()
|
| JB/T 4211.2-1996
| 冷镦螺钉模具终镦 冲头 B型
| ()
|
| JB/T 4211.3-1996
| 冷镦螺钉模具终镦 冲头 C型
| ()
|
| JB/T 4211.4-1996
| 冷镦螺钉模具终镦 冲头 D型
| ()
|
| JB/T 4211.5-1996
| 冷镦螺钉模具终镦 冲头 E型
| ()
|
| JB/T 4211.6-1996
| 冷镦螺钉模具终镦 冲头 F型
| ()
|
| JB/T 4211.7-1996
| 冷镦螺钉模具终镦 冲头 G型
| ()
|
| JB/T 4211.8-1996
| 冷镦螺钉模具终镦 冲头 H型
| ()
|
| JB/T 4211.9-1996
| 冷镦螺钉模具 凹模 A型
| ()
|
| JB/T 4212.1-1996
| 冷镦内六角圆柱头螺钉模具 初镦冲头 A型
| ()
|
| JB/T 4212.10-1996
| 冷镦内六角圆柱头螺钉模具 初镦凹模
| ()
|
| JB/T 4212.11-1996
| 冷镦内六角圆柱头螺钉模具 成形凹模
| ()
|
| JB/T 4212.12-1996
| 冷镦内六角圆柱头螺钉模具 六角凹模片
| ()
|
| JB/T 4212.13-1996
| 冷镦内六角圆柱头螺钉模具 镦六角凹模
| ()
|
| JB/T 4212.2-1996
| 冷镦内六角圆柱头螺钉模具 初镦冲头顶杆 A型
| ()
|
| JB/T 4212.3-1996
| 冷镦内六角圆柱头螺钉模具 初镦冲头 B型
| ()
|
| JB/T 4212.4-1996
| 冷镦内六角圆柱头螺钉模具 成形冲头
| ()
|
| JB/T 4212.5-1996
| 冷镦内六角圆柱头螺钉模具 内六角冲头 A型
| ()
|
| JB/T 4212.6-1996
| 冷镦内六角圆柱头螺钉模具 内六角冲头 B型
| ()
|
| JB/T 4212.7-1996
| 冷镦内六角圆柱头螺钉模具 内六角冲头 C型
| ()
|
| JB/T 4212.8-1996
| 冷镦内六角圆柱头螺钉模具 内六角冲头 D型
| ()
|
| JB/T 4212.9-1996
| 冷镦内六角圆柱头螺钉模具 初镦成形凹模片
| ()
|
| JB/T 5129-2004
| 纯扭式气动螺丝刀
| ()
|
| JB/T 5227.6-1991
| 气相色谱仪用管路附件 堵头螺钉
| ()
|
| JB/T 5343-1999
| 电动自攻螺丝刀
| ()
|
| JB/T 5399-1991
| 尼龙嵌件锁紧螺栓、螺钉锁紧部分 结构要素与锁紧力矩
| ()
|
| JB/T 5614-2006
| 锯片铣刀、螺钉槽铣刀寿命试验方法
| Life testing methods in metal slitting saws and bolt slot cutters
|
| JB/T 7384.13-1994
| 紧固件 自攻锁紧螺钉外接圆直径量规
| ()
|
| JB/T 7384.14-1994
| 紧固件 木螺钉螺纹小径卡尺
| ()
|
| JB/T 7650.5-2008
| 冲模卸料装置 第5部分：圆柱头卸料螺钉
| Stripping units of stamping dies-Part 5:Clyindrical head stripper bolts
|
| JB/T 7650.5-2008
| 冲模卸料装置 第5部分：圆柱头卸料螺钉
| Stripping units of stamping dies-Part 5:Clyindrical head stripper bolts
|
| JB/T 7650.6-2008
| 冲模卸料装置 第6部分：圆柱头内六角卸料螺钉
| Stripping units of stamping dies-Part 6:Hexagonal socket stripper bolts
|
| JB/T 7650.6-2008
| 冲模卸料装置 第6部分：圆柱头内六角卸料螺钉
| Stripping units of stamping dies-Part 6:Hexagonal socket stripper bolts
|
| JB/T 7755-2007
| 滚动轴承 附件 外球面球轴承用紧定螺钉
| ()
|
| JB/T 8006.1-1999
| 机床夹具零件及部件 压紧螺钉
| ()
|
| JB/T 8006.2-1999
| 机床夹具零件及部件 六角头压紧螺钉
| ()
|
| JB/T 8006.3-1999
| 机床夹具零件及部件 固定手柄压紧螺钉
| ()
|
| JB/T 8006.4-1999
| 机床夹具零件及部件 活动手柄压紧螺钉
| ()
|
| JB/T 8026.6-1999
| 机床夹具零件及部件 螺钉支承
| ()
|
| JB/T 8036.1-1999
| 机床夹具零件及部件 螺钉支座
| ()
|
| JB/T 8042-1999
| 机床夹具零件及部件 螺钉用垫板
| ()
|
| JB/T 8043.1-1999
| 机床夹具零件及部件 塑料夹具用六角头螺钉
| ()
|
| JB/T 8043.2-1999
| 机床夹具零件及部件 塑料夹具用内六角螺钉
| ()
|
| JB/T 8045.5-1999
| 机床夹具零件及部件 钻套螺钉
| ()
|
| JB/T 8046.3-1999
| 机床夹具零件及部件 镗套螺钉
| ()
|
| JB/T 8363.1-1996
| 沉孔可转位刀片用紧固螺钉头部内六角花型的型式和尺寸
| ()
|
| JB/T 8363.2-1996
| 沉孔可转位刀片用紧固螺钉 技术规范
| ()
|
| JB/T 8366-1996
| 螺钉槽铣刀
| ()
|
| JB/T 9151.1-1999
| 紧固件测试方法 尺寸与几何精度 螺栓、螺钉、螺柱和螺母
| ()
|
| JB/T 9151.2-1999
| 紧固件测试方法 尺寸与几何精度 木螺钉
| ()
|
| JB/T 9151.3-1999
| 紧固件测试方法 尺寸与几何精度 自攻螺钉
| ()
|
| JB/T 9158.13-1999
| 卧式多轴自动车床辅具 方头螺钉尺寸
| ()
|
| JB/T 9161.10-1999
| 内圆磨床接杆用螺钉 尺寸
| ()
|
| JB/T 9162.14-1999
| 带孔滚花螺钉 尺寸
| ()
|
| JB/T 9162.14-1999
| 带孔滚花螺钉 尺寸
| ()
|
| JB/T 9162.15-1999
| 压紧螺钉 尺寸
| ()
|
| JB/T 9162.16-1999
| 圆柱头螺钉 尺寸
| ()
|
| QB/T 1906-1993
| 手表螺钉
| ()
|
| QB/T 2146-1995
| 家用缝纫机挑线杆螺钉
| ()
|
| QB/T 2448-1999
| 手表通用螺钉尺寸系列
| ()
|
| QB/T 2564.1-2002
| 螺钉旋具 命名与术语
| ()
|
| QB/T 2564.2-2002
| 螺钉旋具 一字槽螺钉旋具旋杆
| ()
|
| QB/T 2564.3-2002
| 螺钉旋具 十字槽螺钉旋具旋杆
| ()
|
| QB/T 2564.4-2002
| 螺钉旋具 一字槽螺钉旋具
| ()
|
| QB/T 2564.5-2002
| 螺钉旋具 十字槽螺钉旋具
| ()
|
| QB/T 2564.6-2002
| 螺钉旋具 螺旋棘轮螺钉旋具
| ()
|
| QB/T 2564.6-2002
| 螺钉旋具 螺旋棘轮螺钉旋具
| ()
|
| QB/T 3555-1999
| 家用缝纫机大顶尖螺钉技术条件
| ()
|
| QC/T 602-1999(2005)
| 十字槽大半圆头自攻螺钉
| ()
|
| QC/T 602-1999(2005)
| 十字槽大半圆头自攻螺钉
| ()
|
| QC/T 713-2004
| 塑料（尼龙）用自攻螺钉螺纹
| Tapping screws thread for plastic(nylon)
|
| 编号 | 中文名称 | 英文名称 |
|---|