| 编号 | 中文名称 | 英文名称 |
|---|
| NF B51-128-1993
| 纤维板.螺钉轴向抽出阻力的测定
| (FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).)
|
| NF B51-260-1972
| 木屑板.螺丝拔除试验
| (PARTICLE BOARD. TEST FOR WITHDRAWAL OF SCREWS.)
|
| NF C20-115-1971
| 标定截面不超过2.5mm**2，线芯无特殊预加工的硬铜导线连接的无螺钉接线端
| (TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OF CONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTION NOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OF THE CONDUCTOR.)
|
| NF C20-116-1981
| 室外铜导线用螺钉丝端子
| (Terminals with screw campling for external copper conductors.)
|
| NF C60-002-1994
| 家用及类似用低压电路用连接装置.第2-2部分:不带螺钉型夹件的分开的部件连接装置的特别要求
| (Connecting devices for low voltage circuits for household and similar purposes. Part 2-2 : particular requirements for connecting devices as separate entities with screwless-type clamping units.)
|
| NF C83-403-803-2003
| 详细规范:防松螺钉不可拆卸的厚度为0.8MM的带扁平触点的矩形连接器
| (Detail Specification : rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable.)
|
| NF C93-561-1981
| 电子元件.螺钉锁定的小型同轴接头.一般规定
| (Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.)
|
| NF C93-566-1981
| 电子元件.螺钉锁定射频用同轴接头（ＫＮ系列）.一般规定
| (ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW COUPLING (TYPE KN). GENERAL REQUIREMENTS.)
|
| NF C93-578-1996
| 射频连接件.第20部分:外导线内径为13.56mm(0,534 in)同时带有两条内导线的屏蔽平衡电缆用双头螺钉(3/4-20统
| (Radio-frequency connectors. Part 25 : two-pole screw (3/4-20 unef) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type twhn).)
|
| NF E02-312-1981
| 钢制规.螺丝孔莫氏锥环规
| (STEEL GAUGES. MORSE TAPER RING GAUGES.)
|
| NF E02-316-1981
| 钢制规.螺丝孔５％锥度环规
| (STEEL GAUGES. METRIC TAPER RING GAUGES.)
|
| NF E03-152-1981
| 用极限量规检验螺纹.螺钉用螺纹规
| (Thread checking with limit gauges. Threaded gauges for screw.)
|
| NF E03-154-1970
| 公制三角螺纹.用极限规检验螺纹.螺钉和螺钉孔光滑度检查器
| (THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWS AND NUTS.)
|
| NF E04-012-1-1996
| 技术制图.螺钉和螺纹部件.第1部分:通用规范
| (Technical drawings. Screw threads and threaded parts. Part 1 : general conventions.)
|
| NF E04-012-2-1996
| 技术制图.螺钉和螺纹部件.第2部分:螺纹嵌镶件
| (TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART 2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-2).)
|
| NF E04-012-3-1996
| 技术制图.螺钉和螺纹部件.第3部分:简化表示
| (TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADED PARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEAN STANDARD EN ISO 6410-3).)
|
| NF E22-201-1992
| 滚珠螺钉.第1部分:词汇和命名
| (Ball screws. Part 1 : vocabulary and designation.)
|
| NF E22-202-1992
| 滚珠螺钉.第2部分:公称直径和公称引线.米制系列
| (Ball screws. Part 2 : nominal diameters and nominal leads. Metric series.)
|
| NF E22-203-1993
| 球端螺钉.第3部分:合格条件和合格试验
| (Ball screws. Part 3 : acceptance conditions and acceptance tests.)
|
| NF E25-011-1992
| 紧固件的机械特性.由非亚铁金属制造的螺栓,螺钉,柱螺栓和螺母
| (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).)
|
| NF E25-018-2-1994
| 沉头螺钉.第2部分:十字槽
| (CONTERSUNK FLAT HEAD SCREWS. PART 2 : PENETRATION DEPTHY OF CROSS RECESSES. (EUROPEAN STANDARD EN ISO 7721-2).)
|
| NF E25-021-1994
| 螺钉的十字槽(欧洲标准EN ISO 4757)
| (Cross recesses for screws.)
|
| NF E25-022-1-2001
| 紧固件公差.螺栓、螺钉、双头螺栓和螺母.第1部分:产品等级A、B及C
| (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.)
|
| NF E25-022-1987
| 紧固件.Ｆ级螺钉和螺帽公差（精密机械）.螺纹直径1到3mm
| (FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3 MM.)
|
| NF E25-023-1992
| 紧固件.螺栓和螺钉的自由尺寸孔
| (Fasteners. Clearance hole for bolts and screws.)
|
| NF E25-100-1-1999
| 碳钢合金制成的紧固件的机械性能.第1部分:螺栓、螺钉和螺柱
| (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.)
|
| NF E25-100-3-1992
| 紧固件.表面不连续性.第1部分:一般要求的螺栓、螺钉和螺柱
| (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).)
|
| NF E25-100-4-1992
| 紧固件.表面不连续性.第3部分:特殊要求的螺栓、螺钉和螺柱
| (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).)
|
| NF E25-100-5-1998
| 碳钢和不锈钢制紧固件的机械性能.第5部分:不处在拉伸应力下的固定螺钉和类似螺纹紧固件
| (Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.)
|
| NF E25-100-6-1998
| 不锈钢紧固件耐腐蚀的机械特性.螺栓,螺丝和双端螺栓
| (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.)
|
| NF E25-100-7-1995
| 紧固件的机械性能.第7部分:公称直径1-10mm的螺栓和螺钉的扭力试验和最小扭矩
| (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).)
|
| NF E25-100-8-1998
| 不锈钢紧固件耐腐蚀的机械特性.不低于拉伸应力下配套螺钉和类似紧固件
| (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.)
|
| NF E25-107-1983
| 金属用螺钉.内部六叶埋头.Ａ级.符号ＦＸ
| (SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.)
|
| NF E25-108-2001
| 半埋头内六角螺钉
| (Hexalobular socket raised countersunk head screws.)
|
| NF E25-109-2001
| 平头内六角螺钉
| (Hexalobular socket pan head screws.)
|
| NF E25-110-2001
| 圆柱头内六角螺钉
| (Hexalobular socket head cap screws.)
|
| NF E25-111-2001
| 凸头内六角螺钉
| (Hexalobular socket cheese head screws.)
|
| NF E25-114-2001
| 六角头螺钉.产品等级A和B
| (Hexagon head bolts - Product grades A and B.)
|
| NF E25-115-2-2001
| 六角头螺钉.产品等级C
| (Hexagon head screws - Product grade C.)
|
| NF E25-116-1983
| 金属用螺钉.方头.标准杆.A和B级.符号Q
| (Square head screws. Product grades A and B. Symbol Q.)
|
| NF E25-117-1983
| 金属用螺钉.方头.全螺纹.A和B级.符号Q
| (Square head screws. Product grades A and B. Symbol Q.)
|
| NF E25-118-1983
| 金属用螺钉.方头.C级.符号Q
| (Square head screws. Product grade C. Symbol Q.)
|
| NF E25-119-1-1994
| 带有H型或Z型的十字槽沉头螺钉(普通头型).产品等级A.第1部分:性能类别4.8的钢
| (Countersunk flat head screws (common head style) with type H or type Z cross recessed. Product grade A. Part 1 : steel of property class 4.8.)
|
| NF E25-119-2-1994
| 十字槽沉头螺钉(一般头形).等级A.第2部分:8.8类特性钢,不锈钢和有色金属
| (Cross recessed countersunk flat head scews (common head style). Grade A. Part 2 : steel of property class 8.8, stainless steel and non-ferrous metals.)
|
| NF E25-120-1994
| 带有H型或Z型的十字槽半沉头螺钉(普通头型).产品等级A
| (Countersunk raised head screws (common head style) with type H or type Z cross recessed. Product grade A.)
|
| NF E25-121-1994
| 带有H型或Z型十字槽的平圆头螺钉.产品等级A
| (Pan head screws with type H or type Z cross recess. Product grade A.)
|
| NF E25-122-1984
| 金属用螺钉.称作“POLIER“的Z十字槽宽圆头.A级.符号RLZ
| (SCREWS. CROSS RECESSED MUSHROOM HEAD (POELIERS). PRODUCT GRADE A. SYMBOL RL Z.)
|
| NF E25-123-1994
| 一字槽沉头螺钉(普通头型).产品等级A
| (Slotted countersunk flat head screws (common head style). Product grade A.)
|
| NF E25-124-1994
| 一字槽半沉头螺钉(普通头型).产品等级A
| (Slotted raised countersunk head screws (common head style). Product grade A.)
|
| NF E25-126-1997
| 内六角圆头螺钉
| (HEXAGON SOCKET BUTTON HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7380).)
|
| NF E25-128-1994
| 一字槽平圆头螺钉.产品等级A
| (Slotted pan head screws. Product grade A.)
|
| NF E25-130-1986
| 加垫圈的金属用螺钉.锥形光滑压紧垫圈.Ａ级
| (SCREWS WITH CONICAL SPRING TIGHTENING WASHER. PRODUCT GRADE A.)
|
| NF E25-131-1986
| 加垫圈的金属用螺钉.内齿锥形垫圈.Ａ级
| (SCREWS WITH CONICAL SPRING INTERNAL TOOTHED TIGHTENING WASHER. PRODUCT GRADE A.)
|
| NF E25-132-1986
| 加垫圈的金属用螺钉.外齿垫圈.Ａ级
| (SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.)
|
| NF E25-133-1987
| 紧固件.螺杆千斤顶用的金属螺钉.短六角头长制动端螺钉.Ａ和Ｂ级.符号ＨＺ
| (Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.)
|
| NF E25-134-1987
| 紧固件.螺杆千斤顶用的金属螺钉.短方头短制动端螺钉.Ａ和Ｂ级.符号ＱＺ
| (Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.)
|
| NF E25-139-1987
| 紧固件.金属用螺钉.Ｚ十字槽宽凸圆柱形头.Ａ级.符号ＣＢＬＺＳ
| (FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. GRADE A. SYMBOL CBL ZS.)
|
| NF E25-142-1991
| 紧固件.电阻焊金属螺钉.缩小头
| (FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.)
|
| NF E25-149-1998
| 十字槽圆头螺钉
| (CROSS RECESSED CHEESE HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7048).)
|
| NF E25-150-1998
| 带平垫圈的螺钉和垫圈组件.垫圈强度等级为200 HV和300 HV.
| (Screw and washer assemblies with plain washers. Washer hardness classes 200 HV and 300 HV.)
|
| NF E25-151-2001
| 米制细牙螺纹的六角头螺钉.产品等级A和B
| (Hexagon head screws with metric fine pitch thread - Product grades A and B.)
|
| NF E25-160-1992
| 平端开槽调整螺钉
| (SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).)
|
| NF E25-161-1992
| 锥端开槽调整螺钉
| (SLOTTED SET SCEWS WITH CONE POINT. (EUROPEAN STANDARD EN 27434).)
|
| NF E25-162-1992
| 长制动端开槽调整螺钉
| (SLOTTED SET SCREWS WITH LONG DOG POINT. (EUROPEAN STANDARD EN 27435).)
|
| NF E25-163-1992
| 蝶形端开槽调整螺钉
| (SLOTTED SET SCEWS WITH CUP POINT. (EUROPEAN STANDARD EN 27436).)
|
| NF E25-501-2000
| 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.A级和C级
| (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.)
|
| NF E25-520-1998
| 螺丝和洗衣机组件用水平式洗衣机.小型,常规型和大型系列.A级产品
| (PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A. (EUROPEAN STANDARD EN ISO 10673).)
|
| NF E25-525-2000
| 通用米制螺栓、螺钉和螺母用平垫圈.一般示意图
| (Plain washers for metric bolts, screws and nuts for general purposes - General plan.)
|
| NF E25-600-1984
| 紧固件.木螺钉系列标准
| (FASTENERS. WOOD SCREWS FAMILY STANDARD.)
|
| NF E25-601-1984
| 十字槽沉头木螺钉.符号FZ
| (CROSS RECESSED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FZ.)
|
| NF E25-602-1984
| 十字槽沉头木螺钉.符号FBZ
| (CROSS RECESSED RAISED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FBZ.)
|
| NF E25-603-1984
| 一字槽圆头木螺钉.符号RZ
| (CROSS RECESSED ROUND HEAD WOOD SCREWS. SYMBOL RZ.)
|
| NF E25-604-1984
| 有槽沉头木螺钉.符号FS
| (Slotted countersunk head wood screws. Symbol FS.)
|
| NF E25-605-1984
| 木螺丝.一字槽沉头.FBS符号
| (Slotted raised countersunk head wood screws. Symbol FBS.)
|
| NF E25-609-1985
| 木螺钉.螺丝眼
| (WOODSCREWS. SCREW-EYES.)
|
| NF E25-609-1985
| 木螺钉.螺丝眼
| (WOODSCREWS. SCREW-EYES.)
|
| NF E25-610-1985
| 木螺钉.螺丝钩
| (WOODSCREWS. SCREW-HOOKS.)
|
| NF E25-610-1985
| 木螺钉.螺丝钩
| (WOODSCREWS. SCREW-HOOKS.)
|
| NF E25-611-1985
| 木螺钉.直角弯头螺丝钩
| (WOODSCREWS. SQUARE BEND SCREW HOOKS.)
|
| NF E25-611-1985
| 木螺钉.直角弯头螺丝钩
| (WOODSCREWS. SQUARE BEND SCREW HOOKS.)
|
| NF E25-650-1-1994
| 热处理钢自攻螺钉.机械性能
| (Heat-treated steel tapping screws. Mechanical properties.)
|
| NF E25-650-2-1999
| 自攻螺钉螺纹
| (Tapping screw thread.)
|
| NF E25-651-2003
| 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉
| (Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws.)
|
| NF E25-652-2001
| 沉头内六角攻丝螺钉
| (Hexalobular socket countersunk head tapping screws.)
|
| NF E25-653-2001
| 半埋头(椭圆形)内六角攻丝螺钉
| (Hexalobular socket raised countersunk (oval) head tapping screws.)
|
| NF E25-654-2001
| 平头内六角攻丝螺钉
| (Hexalobular socket pan head tapping screws.)
|
| NF E25-655-1983
| 内六角圆头自攻螺钉.符号RLX
| (ROUND HEAD TAPPING SCREWS WITH SIX LOBES RECESS. SYMBOL RLX .)
|
| NF E25-656-1994
| 十字槽沉头自攻螺钉(普通头型)
| (Cross recessed countersunk (flat) head tapping screws (common head style).)
|
| NF E25-657-1994
| 十字槽半沉头椭圆头自攻螺钉
| (Cross recessed raised countersunk (oval) head tapping screws.)
|
| NF E25-658-1994
| 十字槽平圆头自攻螺钉
| (Cross recessed pan head tapping screws.)
|
| NF E25-659-1984
| 自攻螺钉.十字槽半沉头.(`Poelier`).符号RLZ
| (TAPPING SCREWS. CROSS RECESSED MUSHROOM HEAD (“POELIER“). SYMBOL RL Z.)
|
| NF E25-664-1986
| 一字槽六角头自攻螺钉.符号HS
| (HEXAGON SLOTTED HEAD TAPPING SCREWS. SYMBOL HS.)
|
| NF E25-666-1987
| 紧固件.自攻螺钉.Z形十字槽和一字槽平圆头螺钉.符号CBL ZS
| (FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. SYMBOL CBL ZS.)
|
| NF E25-755-1997
| 非硬度钢和奥斯特不锈钢的内螺纹平行螺钉
| (Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.)
|
| NF E25-756-1997
| 金属不锈钢和硬化钢的平行螺钉
| (Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).)
|
| NF E25-757-1997
| 非硬度钢和奥斯特不锈钢的内螺纹平行螺钉
| (Parallel pins with internal thread, of hardened steel and martensitic stainless steel.)
|
| NF E25-800-1-1994
| 紧固件.波纹钢管用螺栓.第1部分:带法兰或不带法兰,带尖或不带尖的六角头螺钉.产品等级A
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
|
| NF E25-800-2-1994
| 紧固件.波纹钢管用螺栓.第2部分:带尖或不带尖的圆头螺钉.产品等级A
| (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.)
|
| NF E25-851-1987
| 紧固件.滚制螺钉(ISO米制螺纹).特性
| (FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.)
|
| NF E27-163-1972
| 调整螺钉
| (ADJUSTING SCREW.)
|
| NF E27-164-1976
| 锁紧螺钉的垫板
| (LOCKING SCREW.)
|
| NF E27-165-1976
| 锁紧螺钉的穿销
| (SLIDE FOR LOCKING SCREW.)
|
| NF E27-166-1976
| 滚花头锁紧螺钉
| (LOCKING SCREW WITH KNURLED KNOB.)
|
| NF E27-167-1976
| 星形手扭锁紧螺钉
| (LOCKING SCREW WITH PALM KNOB.)
|
| NF E27-168-1976
| 四翼锁紧螺钉
| (LOCKING SCREW WITH 4 ARMED KNOB.)
|
| NF E27-170-1974
| 通用滚花头螺钉
| (GENERAL PURPOSE KNURLED THUMBS SCREWS.)
|
| NF E27-191-1983
| 紧固件.有肩固定螺钉
| (FASTENERS. SHOULDERED RETAINING SCREWS.)
|
| NF E27-214-1976
| 带小提琴紧弦用的蝶形螺母锁紧螺钉
| (LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.)
|
| NF E27-215-1976
| 带六角螺母的锁紧螺钉
| (LOCKING SCREWS WITH HEXAGON NUT.)
|
| NF E27-303-1968
| 有孔球头螺钉
| (SPHERICAL HOLED HEAD SCREW.)
|
| NF E27-853-1989
| 通用金属卡箍.带型，无螺钉，不可重复使用
| (Metallic hose clamps for general purpose. Band type, without screws, non re-usable. Specifications.)
|
| NF E27-854-1982
| 通用金属卡箍.带型,无螺钉,可重复使用的销钉卡箍或轴的卡箍
| (METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE,WITHOUT SCREWS,RE-USABLE,PIN OR AXLE CLAMPS.)
|
| NF E62-307-1977
| 机床构造标准部件.多轴头.防护装置.２８和３６卧式防护装置.支架.行程止推螺钉
| (MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOP SCREW.)
|
| NF E62-519-2003
| 柱形扁柄刀具用螺钉压紧刀具夹(立铣刀刀夹).第1部分:刀柄驱动系统的尺寸
| (Tool chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tool - Part 1 : dimensions of the driving system of tool shanks.)
|
| NF E62-520-2003
| 柱形扁柄刀具用螺钉压紧刀具夹(立铣刀刀夹).带7/24锥柄的夹头尺寸
| (Tools chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tools - Dimensions of chucks with 7/24 taper shank.)
|
| NF E62-526-2003
| 带7/24外圆锥和莫氏内圆锥缩径套筒和连接螺钉
| (Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw.)
|
| NF E63-512-1983
| 铸型和挤压器材.金属模型构件.止动螺钉
| (MOULDING AND EXTRUSION EQUIPMENT. METALLIC MOULDING ELEMENTS. LOCKING SCREWS.)
|
| NF E66-103-1993
| 机用螺丝锥和手动螺丝锥
| (Short machine taps and hand taps.)
|
| NF E66-107-2000
| 公称直径由M3-M10的长杆螺丝攻.由回缩的全直径杆型螺丝攻
| (Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess.)
|
| NF E66-108-2000
| 公称直径由M3-M24和1/8-1 英寸的长杆螺丝攻.渐减型螺丝攻
| (Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps.)
|
| NF E66-120-1975
| 圆柱和锥形管螺纹手用螺丝锥
| (HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.)
|
| NF E66-150-1990
| ＩＳＯ公制螺纹的手用和机用圆螺丝板牙
| (Hand- An machine-operated circular screwing dies and hand-operated die stocks.)
|
| NF E66-153-1990
| 煤气管道圆柱螺纹手用和机用圆螺丝板牙
| (Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.)
|
| NF E74-303-2001
| 螺钉和螺母组装工具.锻造的和管形套筒扳手.头部外形最大尺寸
| (Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.)
|
| NF E74-304-2001
| 螺钉和螺母装配工具.双头开口扳手、双头环形扳手和多用扳手.端部最大宽度
| (Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches - Maximum widths of heads.)
|
| NF E74-305-2001
| 螺钉和螺母装配工具.双头扳手.尺寸选配
| (Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.)
|
| NF E74-307-2001
| 螺钉和螺母用装配工具.组合扳手.扳手长度和端口最大厚度
| (Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.)
|
| NF E74-310-2001
| 螺钉和螺母用装配工具.工程用双头开口扳手.扳手长度和端口厚度
| (Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-311-2001
| 螺钉和螺母用装配工具.双头平直套筒扳手和斜口套筒扳手.扳手长度和端口厚度
| (Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-313-2001
| 螺钉和螺母用装配工具.双头深斜口套筒扳手和改进的斜口套筒扳手.扳手长度和端口厚度
| (Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads.)
|
| NF E74-321-1998
| 螺钉和螺母用装配工具.十字形套筒扳手.尺寸和扭矩试验
| (ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.)
|
| NF E74-322-1972
| 螺钉螺帽紧固工具.齿条式扳手
| (ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.)
|
| NF E74-323-1972
| 螺钉螺帽紧固工具.开槽螺帽用单钩扳手
| (ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES)
|
| NF E74-324-2001
| 螺钉和螺母用装配工具.可调扳手
| (Assembly tools for screws and nuts - Adjustable wrenches.)
|
| NF E74-325-2003
| 螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法
| (Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.)
|
| NF E74-331-2003
| 螺钉和螺母用装配工具.内六角扳手
| (Assembly tools for screws and nuts - Hexagon socket screw keys.)
|
| NF E74-351-2002
| 螺钉和螺母用装配工具.一字槽头螺钉用旋具.第2部分:手工操作旋具的一般要求、刀刃长度和标记
| (Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.)
|
| NF E74-352-1998
| 螺钉和螺母用装配工具.槽螺钉用旋具.第1部分:手工及机械操作用的旋具头
| (Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.)
|
| NF E74-353-1-2002
| 螺钉和螺母用装配工具.机动旋转头.第1部分:一字槽螺钉旋具
| (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.)
|
| NF E74-353-2-2002
| 螺钉和螺母用装配工具.机动旋转头.第2部分:十字槽螺钉旋具头
| (Assembly tools for screws and nuts - Machine-operated screwdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.)
|
| NF E74-353-3-2002
| 螺钉和螺母用装配工具.机动旋转头.第3部分:内六角螺钉用旋具头
| (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws.)
|
| NF E74-354-2002
| 螺钉和螺母用装配工具.螺旋棘轮螺钉旋具头.尺寸
| (Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions.)
|
| NF E74-355-1993
| 十字槽头螺钉用旋转具.第1部分:旋具尖
| (SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.)
|
| NF E74-356-1993
| 十字槽头螺钉用旋具.第2部分:手持式旋具的一般要求、旋具头长度和标记
| (SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 : GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS.)
|
| NF E74-360-2001
| 螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验
| (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.)
|
| NF E74-360-2001
| 螺钉和螺母用装配工具.手动和机动螺丝刀的驱动端和连接部件.尺寸和扭矩试验
| (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.)
|
| NF E74-361-1997
| 螺钉和螺母用装配工具.方形旋具.第1部分:手动套筒工具用方形旋具
| (Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.)
|
| NF E74-362-1997
| 螺钉和螺母用装配工具.方形旋具.第2部分:电动套筒工具用方形旋具
| (Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.)
|
| NF E74-363-1-1997
| 螺钉和螺母用装配工具.方形传动套筒.第1部分:手动套筒.尺寸
| (Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.)
|
| NF E74-363-2-1997
| 螺钉和螺母用装配工具.方形传动套筒.第2部分:机动“冲击“套筒.尺寸
| (Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.)
|
| NF E74-363-3-2001
| 螺钉和螺母用组合工具.方形驱动套筒.第3部分:机器驱动套筒(无冲击).尺寸
| (Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (“non impact“) - Dimensions.)
|
| NF E74-365-1997
| 螺钉和螺母用装配工具.手动方形传动套筒扳手上的传动件.尺寸和试验
| (Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.)
|
| NF E74-366-1997
| 螺钉和螺母用装配工具.手动方形传动套筒扳手上的附件.尺寸和试验
| (Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.)
|
| NF E74-367-1995
| 螺钉和螺母用装配工具.机动插头扳手的方块传动加长六角插头
| (Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.)
|
| NF E74-381-1997
| 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒
| (Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.)
|
| NF E82-020-1984
| 模压锻造零件.拉紧装置用灯的螺钉.规范
| (DROP FORGINS. EYEBOLTS FOR TURNBUCKLES. REQUIREMENTS.)
|
| NF F01-088-1971
| 铁路运输设备.带有槽端头和螺纹端头的未钻孔轴.头部钻孔的螺钉
| (RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH SLOTTED AND THREADED ENDS. SCREWS WITH DRILLED HEADS.)
|
| NF F03-004-1983
| 铁路车辆.金属螺钉. 沉头和半沉头. Ａ级. 符号Ｆ和ＦＢ
| (Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.)
|
| NF F03-005-1983
| 铁路车辆.金属螺钉. 圆柱头和球面圆柱头. Ａ级. 符号Ｃ和ＣＲ
| (Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.)
|
| NF F03-006-1983
| 铁路车辆.开槽懦半沉头螺钉一螺母. Ａ级. 符号ＦＢＰ
| (Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.)
|
| NF F03-016-1983
| 铁路车辆.开槽沉头螺钉, 螺母. Ａ级. ＦＰ
| (Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.)
|
| NF F10-404-1984
| 铁路车辆.0.25MN的联接螺钉
| (Railway transport equipment. Coupling screw of 0,25 mn.)
|
| NF F11-003-1970
| 铁路车辆.手制动. 螺钉和螺母. 螺距和螺纹剖面. 螺钉传动
| (RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS. PITCHES AND PROFILES. SCREW DRIVES.)
|
| NF F50-006-1998
| 铁路固定设备.带可变螺纹的枕木螺丝
| (Railway fixed equipment. Sleeper screws with variable thread.)
|
| NF F55-251-1991
| 铁路固定设备.信号电路.连接和分段器材.螺钉连接部件
| (RAILWAY FIXED EQUIPMENT. SIGNALLING. CIRCUITS. CONNECTING AND BREAKING COMPONENTS. SCREW-TYPE TERMINAL BLOCKS.)
|
| NF F56-123-1980
| 铁路固定设备.通讯和信号装置架空线路用器材.直径口毫米镀锌方头木螺钉
| (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. GALVANIZED SQUARE HEAD WOOD SCREWS.)
|
| NF J41-465-1957
| 造船工业.“金士顿“阀门.螺钉零件
| (SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.)
|
| NF J46-126-1951
| 造船工业.空气入口.手柄和紧固螺钉
| (SHIPBUILDING. VENTILATORS. HANDLE AND LOCKING SCREW.)
|
| NF L22-063-1970
| 用板手操作的螺母、螺钉和轴的间隙
| (CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.)
|
| NF L22-070-1976
| 螺钉的BNAE型十字槽
| (CROSS RECESS (B.N.A.E.).)
|
| NF L22-071-1976
| NFL ２２-０７０ 型螺钉十字槽用螺丝刀头
| (SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)
|
| NF L22-071-1976
| NFL ２２-０７０ 型螺钉十字槽用螺丝刀头
| (SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.)
|
| NF L22-072-1991
| 航天建筑.螺丝.920型十字槽
| (Aerospace construction. Bolts and screws. 92 degrees cruciform recess.)
|
| NF L22-090-1966
| 修配用大直径标准螺钉、销和垫圈
| (STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.)
|
| NF L22-111-1975
| 无销孔六角头螺钉.国际单位制螺纹
| (Hexagon head bolts without split pin hole. Sim thread (rech.).)
|
| NF L22-112-1975
| 带销孔六角头螺钉.国际单位制螺纹
| (Hexagon head bolts with split pin hole. Sim thread (rech.).)
|
| NF L22-121-1975
| 带轻杆无锁孔六角头螺钉.国际单位制螺纹
| (Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).)
|
| NF L22-122-1975
| 带轻杆有销孔六角头螺钉.国际单位米制螺纹
| (Hexagon head bolts with waisted shank with split pin hole. Sim thread.)
|
| NF L22-125-1985
| 六角头承拉螺钉ISO 螺纹４h 类
| (Bolt, hexagonal head, for tensile application, . ISO thread 4H class.)
|
| NF L22-126-1985
| 带锁紧孔六角头承拉螺钉.ISO螺纹４h 类
| (Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.)
|
| NF L22-127-1985
| 带颈杆六角头承拉螺钉.ISO螺 纹４h 类
| (Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.)
|
| NF L22-128-1985
| 带颈杆有锁紧孔六角头承拉螺钉.ISO 螺纹４h 类
| (Bolt, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4H class.)
|
| NF L22-129-1985
| 带销孔六角头承拉螺钉.ISO 螺纹４h 类
| (Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.)
|
| NF L22-134-1975
| 无销孔六角头槽制螺钉.国际单位制螺纹
| (Precision hexagon head bolts without split pin hole. Sim thread (rech.).)
|
| NF L22-135-1975
| 带销孔六角头槽制螺钉.国际单位制螺纹
| (Precision hexagon head bolts with split pin hole. Sim thread (rech.).)
|
| NF L22-136-1984
| 通用六角头螺钉短螺纹
| (Bolt, hexagonal head, current use, short thread.)
|
| NF L22-137-1984
| 带锁紧孔六角头短螺纹螺钉
| (Bolt, hexagonal head, with locking hole, short thread.)
|
| NF L22-138-1984
| 精密六角头短螺纹螺钉
| (Bolt, hexagonal head, close tolerance, short thread.)
|
| NF L22-139-1984
| 带锁紧孔精密头角头短螺纹螺钉
| (BOLT,HEXAGONAL HEAD,CLOSE TOLERANCE,WITH LOCKING HOLE,SHORT THREAD.)
|
| NF L22-140-1984
| 六角头全螺纹螺钉
| (Bolt, hexagonal head, threaded to head.)
|
| NF L22-141-1984
| 有锁紧孔方角头全螺纹螺钉
| (Bolt, hexagonal head, with locking hole, threaded to head.)
|
| NF L22-142-1984
| 常用有销孔六角头螺钉
| (BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.)
|
| NF L22-145-1985
| 六角头承拉螺钉.ISO螺纹4G类
| (Bolt, hexagonal head, for tensile application, ISO thread 4G class.)
|
| NF L22-146-1985
| 有锁紧孔六角头承拉螺钉.ISO螺纹4G类
| (Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4G class.)
|
| NF L22-147-1985
| 带颈杆六角头承拉螺钉.ISO螺纹4G类
| (Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4G class.)
|
| NF L22-148-1985
| 带颈杆有销紧孔六角头承拉螺钉.ISO螺纹4G类
| (Bolts, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4G class.)
|
| NF L22-151-1975
| 开槽圆柱头螺钉和紧固凸圆头螺钉.国际单位制螺纹
| (Slotted and drilled cheese head screws. Sim thread (rech.).)
|
| NF L22-152-1975
| 开槽扁头螺钉.国际单位米制螺纹
| (Slotted mushroom head screws. Sim thread (rech.).)
|
| NF L22-153-1975
| 90°埋头开槽螺钉.国际单位米制螺纹
| (Slotted 90 degrees countersunk head screws. Sim thread (rech.).)
|
| NF L22-154-1975
| 120°半圆头开槽埋头螺钉.单际单位米制螺纹
| (Slotted raised 120 degrees countersunk head screws. Sim thread (rech.).)
|
| NF L22-156-1975
| 锥顶凸圆头开槽螺钉.国际单位米制螺纹
| (Slotted raised cheese head screws with cone point. Sim thread (rech.).)
|
| NF L22-157-1975
| 锥顶扁头开槽螺钉.国际单位米制螺纹
| (Slotted mushroom head screws with cone point. Sim thread (rech.).)
|
| NF L22-158-1975
| 锥顶90°埋头开槽螺钉.国际单位米制螺纹
| (Slotted 90 degrees countersunk head screws with cone point. Sim thread (rech.).)
|
| NF L22-159-1975
| 锥顶120°半圆头开槽埋头螺钉.国际单位米制螺纹
| (Slotted raised 120 degrees countersunk head screws with cone point. Sim thread (rech.).)
|
| NF L22-161-1984
| 有NF L22-72十字槽的通用100°埋头螺钉
| (Bolt, 100 degrees countersunk head, current use, nf L 22-072 cross recess.)
|
| NF L22-162-1984
| 有NF L22-072十字槽的精密100°全螺纹埋头螺钉
| (Bolt, 100 degrees countersunk head, close tolerance, nf L 22-072 cross recess.)
|
| NF L22-163-1984
| 有NF L22-072十字槽的常用100°度全螺纹埋头螺钉
| (Bolt, 100 degrees countersunk head, threaded to head, nf L 22-072 cross recess.)
|
| NF L22-167-1984
| 有NF L22-070十字槽的常用100°埋头螺钉
| (Bolt, 100 degrees countersunk head, current use, nf L 22-070 cross recess.)
|
| NF L22-168-1984
| 有NF L22-070 十字槽的紧公差100°沉头螺钉
| (BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-070,CROSS RECESS.)
|
| NF L22-169-1984
| 有 NF L22-070十字槽的100°全螺纹埋头螺钉
| (BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L 22-070,CROSS RECESS.)
|
| NF L22-171-1984
| 有NF L22-072十字槽的常用半圆头螺钉
| (Bolt, pan head, current use, nf L22-072 cross recess.)
|
| NF L22-173-1984
| 有NF L22-072十字槽全螺纹半圆头螺钉
| (BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-072 CROSS RECESS.)
|
| NF L22-176-1984
| 有NF L22-072十字槽锥顶半圆头非磁性螺钉
| (Bolt, pan head, amagnetic with cone point NF L 22-072 cross recess.)
|
| NF L22-177-1984
| 有NF L22-070十字槽常用半圆头螺钉
| (Bolt, pan head, current use, nf L 22-070 cross recess.)
|
| NF L22-179-1984
| 有NF L22-070十字槽全螺纹半圆头螺钉
| (BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-070 CROSS RECESS.)
|
| NF L22-181-1976
| 有BNAE十字槽扁头螺钉.国际单位米制螺纹
| (MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
|
| NF L22-182-1976
| 有BNAE十字槽90°埋头螺钉.国际单位米制螺纹
| (90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
|
| NF L22-183-1976
| 有BNAE十字槽90°埋头螺钉.国际单位米制螺纹
| (RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
|
| NF L22-184-1976
| 有BNAE十字槽120°埋头螺钉.国际单位米制螺纹
| (120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.)
|
| NF L22-186-1976
| 有BNAE十字槽锥顶扁头螺钉.国际单位米制螺纹
| (MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
|
| NF L22-187-1976
| 有BNAE十字槽锥顶90°埋头螺钉.国际单位米制螺纹
| (90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
|
| NF L22-188-1976
| 有BNAE十字槽锥顶120°埋头半圆头螺钉单国际单位制米螺纹
| (RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
|
| NF L22-189-1976
| 有BNAE十字槽锥顶120°埋头螺钉.国际单位米制螺纹
| (120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.)
|
| NF L22-201-1984
| 短螺纹精密螺钉.六角头.ISO螺纹
| (Bolt, hexagonal head, short thread, close tolerance. ISO thread.)
|
| NF L22-202-1984
| 短螺纹精密螺钉.带锁紧孔六角头.ISO螺纹
| (Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.)
|
| NF L22-205-1984
| 有销孔常用六角头螺钉.ISO螺纹
| (Bolt, hexagonal head, with cotter pin hole, current use. ISO thread.)
|
| NF L22-206-1984
| 常用六角头螺钉.ISO螺纹
| (Bolt, hexagonal head, current use. ISO thread.)
|
| NF L22-207-1984
| 带紧锁孔常用六角头螺钉.ISO螺纹
| (Bolt, hexagonal head, with locking hole, current use. ISO thread.)
|
| NF L22-208-1984
| 全螺纹六角头螺钉.ISO螺纹
| (Bolt, hexagonal head, threaded to head. ISO thread.)
|
| NF L22-209-1984
| 带紧锁孔全螺纹六角头螺钉.ISO螺纹
| (Bolt, hexagonal head, with locking hole threaded to head. ISO thread.)
|
| NF L22-220-1984
| 带紧锁丝孔内六角圆柱头螺钉.4H类ISO螺纹
| (Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4H class.)
|
| NF L22-221-1983
| 无紧锁丝孔内六角圆柱头螺钉.4H类ISO螺纹
| (HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 H CLASS.)
|
| NF L22-222-1984
| 带紧锁丝孔内六角圆柱头螺钉.4G类ISO螺纹
| (Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4G class.)
|
| NF L22-223-1983
| 无紧锁孔全六角圆柱头螺钉.4G类ISO螺纹
| (HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.)
|
| NF L22-224-1984
| 带紧锁丝孔全六角圆柱头全螺纹螺钉.4G类ISO螺纹
| (Hexagonal socket cylindrical head screw, threaded to head, with hole for lockwire. ISO thread 4 G class.)
|
| NF L22-225-1983
| 无紧锁丝孔全六角圆柱头全螺纹螺钉.4G类ISO螺纹
| (HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.)
|
| NF L22-236-1989
| 航空用螺栓螺母.十二角头螺钉.使用温度在高于235℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.)
|
| NF L22-237-1989
| 航空用螺栓螺母.带锁紧孔十二角头螺钉.使用温度在高于235℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.)
|
| NF L22-246-1989
| 航空用螺栓螺母.十二角头螺钉.细螺距.使用温度高于在２３５℃
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.)
|
| NF L22-247-1989
| 航空用螺检螺母.十二角头螺钉.细螺距带锁紧孔.使用温度在高于２３５℃以上
| (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS. FINE PITCH.)
|
| NF L22-251-1968
| 航空用ISO螺纹螺拴螺母.AICMA十字槽“通用”１００°沉头螺钉
| (GENERAL PURPOSE 100 DEGREES COUNTERSUNK HEAD SCREWS WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-252-1968
| 航空用螺拴螺母.短螺纹精密螺钉.AICMA十字槽１００°埋头螺钉
| (PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,A.I.C.M.A. CROSS RECESS.)
|
| NF L22-256-1966
| 航空用螺拴螺母.AICMA十字槽全螺纹１００°埋头螺钉.ISO螺纹
| (AIRCRAFT FASTENERS. 100 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED,A.I.C.M.A. CROSS RECESS.)
|
| NF L22-257-1982
| 航空用螺拴螺母.BNAE 十字槽“通用”１００°埋头螺钉.ISO螺纹
| (General purpose 100 degrees countersunk head screws,B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-258-1967
| 航空用螺拴螺母.BNAE 十字槽１００°短螺纹精密埋头螺钉
| (AIRCRAFT FASTENERS. PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,B.N.A.E. CROSS RECESS.)
|
| NF L22-259-1982
| 航空用螺拴螺母.BNAE 十字槽１００°全螺纹埋头螺钉.ISO螺纹
| (100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-271-1966
| 航空用螺拴螺母.AICMA 十字槽半圆头螺钉
| (AIRCRAFT FASTENERS. PAN HEAD SCREWS,WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-272-1966
| 航空用ISO螺纹螺拴螺母.AICMA 十字槽全螺纹半圆头螺钉
| (AIRCRAFT FASTENERS. PAN HEAD SCREWS,FULLY THREADED,WITH A.I.C.M.A. CROSS RECESS.)
|
| NF L22-273-1966
| 航空用螺拴螺母.十字槽锥顶半圆头非磁性螺钉
| (AIRCRAFT FASTENERS. NON-MAGNETIC PAN HEAD SCREWS WITH TRUNCATED CONE POINT. CROSS RECESS.)
|
| NF L22-274-1982
| 航空用螺拴螺母.BNAE十字槽半圆头螺钉.ISO螺纹
| (Pan head screws,B.N.A.E. Cross recess. ISO thread.)
|
| NF L22-277-1968
| 航空用螺拴螺母.温度在260℃以上用全螺纹紧旋圆柱头螺钉
| (DRILLED CHEESE HEAD SCREWS,FULLY THREADED,FOR TEMPERATURES ABOVE 260 DEGREES C.)
|
| NF L22-291-1979
| 全螺纹开槽９０度埋头螺钉.ISO螺纹
| (SLOTTED 90 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-292-1979
| 全螺纹开槽６０度埋头螺钉.ISO螺纹
| (SLOTTED 60 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-293-1979
| 全螺纹开槽圆头螺钉.ISO螺纹
| (SLOTTED CHEESE EHAD SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-296-1979
| 全螺纹开槽紧旋圆柱头螺钉.ISO螺纹
| (SLOTTED AND DRILLED CHEESE HEAD SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-298-1979
| 全螺纹凹六角圆柱头螺钉.ISO螺纹
| (HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED. ISO THREAD.)
|
| NF L22-305-1977
| 无头平顶凸六角螺钉.ISO螺纹
| (HEXAGON SOCKET SET SCREWS,FLAT POINT. ISO THREAD.)
|
| NF L22-306-1977
| 半制动端六角凹头止动螺钉.ISO螺纹
| (HEXAGON SOCKET SET SCREWS,HALF DOG POINT. ISO THREAD.)
|
| NF L22-307-1977
| 无头凹顶凹六角螺钉ISO螺纹
| (HEXAGON SOCKET SET SCREWS,CUP POINT. ISO THREAD.)
|
| NF L22-308-1977
| 无头尖顶凹六角螺钉.ISO螺纹
| (HEXAGON SOCKET SET SCREWS,CONE POINT. ISO THREAD.)
|
| NF L22-309-1977
| 无头截锥顶凹六角螺钉.ISO螺纹
| (HEXAGON SOCKET SET SCREWS,TRUNCATED CONE POINT. ISO THREAD.)
|
| NF L24-020-1989
| 航空和航天.1100MPa强度级和MJ螺纹合金钢螺钉.供应品的规范
| (AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.)
|
| NF L24-025-1989
| 航天.突出头合金钢螺钉.1250MPa强度的等级和MJ螺纹.供应品的规范
| (AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.)
|
| NF L24-109-1997
| 航空航天系列.阳极化MOS2润滑钛合金制标准六角头、螺纹头螺丝.等级:1100MPA(室温)/315℃(欧洲标准EN 3308)
| (AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).)
|
| NF L24-113-1996
| 航空航天系列.镀银FE-PA92HT(A286)耐高温钢制螺纹到底部的六角螺钉.分类:900MPa(室温下)/650℃
| (AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2938).)
|
| NF L24-114-1994
| 航空和航天系列.耐热钢FE-PA92HT(A286)用100°埋头螺钉,偏置式十字形凹口及螺纹头.分类.900MPa(室温)/650℃
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 CELSIUSGRADE. (NORM EUROPEAN STANDARD EN 2939).)
|
| NF L24-115-1996
| 航空航天系列.镀银耐热钢FE-PA92HT(A286)100°埋头偏置式十字形凹口螺纹到底部的螺钉.分类.900MPa(室温)/65
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM ECESS, THREADED TO HEAD, IN HEAT RESISTING TEEL E-PA92HT(A286),SILVERPLATED.CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2940).)
|
| NF L24-117-1996
| 航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细杆六角螺丝钉.等级900MPa(室温下)/650℃
| (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3007).)
|
| NF L24-130-1997
| 航空航天系列.合金钢镀镉100度埋头、槽头、螺纹头螺丝.等级:900MPA(室温)/235℃(欧洲标准EN 2652)
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2652).)
|
| NF L24-131-1996
| 航空航天系列.钝化耐腐蚀钢100度标准埋头、槽头、螺纹头螺丝.分类:600MPA(环境温度)/425℃(欧洲标准EN 2653
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2653).)
|
| NF L24-132-1996
| 航空航天系列.镀锡黄铜100度标准埋头、槽头、螺纹头螺丝.分类:380MPA(环境温度)/80℃(欧洲标准EN 2654)
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TMEPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2654).)
|
| NF L24-133-1997
| 航空和航天系列.100度通用沉头,偏移十字槽,紧配合普通柄,短螺纹,镀镉,合金钢制螺丝.等级:1100MPA(室温下)/2
| ()
|
| NF L24-134-1997
| 航空和航天系列.100度减径沉头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,MOS2润滑,钛合金制螺丝.等级:1100MP
| ()
|
| NF L24-135-1997
| 航空和航天系列.100度减径沉头,偏移十字槽,紧配合普通柄,短螺纹,镀镉,合金钢制螺丝.等级:1100MPA(室温下)/2
| ()
|
| NF L24-136-1997
| 航空和航天系列.阳极化MOS2润滑钛制100度标准埋头偏移十字槽、螺纹头螺丝.等级:1100MPA(室温下)/315℃(欧洲
| (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3306).)
|
| NF L24-137-1997
| 航空和航天系列.100度通用沉头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,钛制螺丝.等级:1100MPA(室温下)/315
| ()
|
| NF L24-138-1997
| 航空和航天系列.钝化耐热耐腐蚀钢制100度标准埋头偏移十字槽紧公差标准柄短螺纹螺丝.等级:1100MPA(室温下)/
| ()
|
| NF L24-139-1997
| 航空和航天系列.100度通用沉头,偏移十字槽,螺纹到顶部,钝化,高温耐蚀钢制螺丝.等级:1100MPA(室温下)/425℃
| ()
|
| NF L24-161-1997
| 航空和航天系列.合金钢镀镉矩形顶盖六角形承口粗公差标准柄中等长度螺纹螺丝.等级:1100MPA(室温下)/235℃(
| (AEROSPACE SERIES. SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3303).)
|
| NF L24-180-1996
| 航空航天系列.钝化耐腐蚀钢盘形头、槽头、螺纹头螺丝.分类:600MPA(环境温度)/425℃(欧洲标准EN 2650)
| (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2650).)
|
| NF L24-181-1996
| 航空航天系列.镀锡黄铜盘形头、槽头、螺纹头螺丝.分类:380MPA(环境温度)/80℃(欧洲标准EN 2651)
| (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TEMPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2651).)
|
| NF L24-182-1996
| 航空和航天.用MoS2润滑,阳极化,钛合金制,短螺纹,带翼型十字槽的平头螺钉.等级:1100MPa(室温下)/315℃
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).)
|
| NF L24-183-1996
| 航空和航天.镀镉,合金钢制,短螺纹,带翼型十字槽的平头螺钉.等级:900MPa(室温下)/235℃
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2885).)
|
| NF L24-184-1996
| 航空和航天系列.镀镉合金钢制短螺纹紧公差标准柄带翼型十字槽的盘形头螺丝.分类:900MPa(环境温度)/235℃(欧
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRICUFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2886).)
|
| NF L24-185-1996
| 航空和航天系列.镀镉合金钢制短螺纹紧公差标准柄带翼型十字槽的盘形头螺丝.分类:1100MPa(环境温度)/235℃(
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2897).)
|
| NF L24-186-1997
| 航空和航天系列.平头,偏移十字槽,紧配合普通柄,短螺纹,阳极化,MOS2润滑,钛合金钢制螺丝.等级:1100MPA(室温
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).)
|
| NF L24-187-1997
| 航空和航天系列.平头,偏移十字槽,紧配合普通柄,短螺纹,钝化,高温耐蚀钢制螺丝.等级:1100MPA(室温下)/425℃
| ()
|
| NF L24-188-1997
| 航空和航天系列.平头,偏移十字槽,螺纹到顶部,阳极化,MOS2润滑,钛合金钢制螺丝.等级:1100MPA(室温下)/315℃
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).)
|
| NF L24-189-1997
| 航空和航天系列.平头,偏移十字槽,螺纹到顶部,钝化,高温耐蚀钢制螺丝.等级:1100MPA(室温下)/425℃
| (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3759).)
|
| NF L24-212-1996
| 航空和航天.耐高温钢FE-FA92HT(A286)制镀银长螺纹细螺杆十二角螺丝钉.等级:900 Mpa(室温外)/650℃
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-221-1996
| 航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温外)/650℃
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-222-1996
| 航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制镀银长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(环境温度)
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-225-1996
| 航空航天.加高螺母用耐高温镍基合金NI-P101HT(WASPALOY)中长螺纹紧公差十二角螺丝钉.分类:1210Mpa(室温)/73
| (Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-231-1996
| 航空和航天.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1210 Mpa(室温外)/730℃
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-232-1996
| 航空和航天.耐高温镍基合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)制镀银长螺纹细螺杆十二角螺丝钉.等级
| (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-382-1996
| 航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细螺杆T字头螺丝钉.等级:900 Mpa(室温外)/650℃
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-383-1996
| 航空和航天.耐高温镍基合金NI-P100HT(INCONE/718)长螺纹细螺杆T字头螺丝钉.分类:1275 Mpa(室温下)/650℃
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-384-1996
| 航空和航天.耐高温镍基合金NI-P100HT(INCONE/718)镀银长螺纹细螺杆T字头螺丝钉.分类:1275 Mpa(室温下)/650
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L24-385-1996
| 航空和航天.耐高温镍基合金NI-P101HT(WASPALOY)长螺纹细螺杆T字头螺丝钉.分类:1210 Mpa(室温下)/730℃
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-386-1996
| 航空和航天.耐高温镍基合金NI-P101HT(WASPALOY)镀银长螺纹细螺杆T字头螺丝钉.分类:1210 Mpa(室温下)/730℃
| (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.)
|
| NF L24-675-1994
| 航空和航天系列.耐热钢FE-PA92HT用自锁定螺钉体螺母.分类.1100MPa(室温)/650℃
| (Aerospace series. Shank nuts, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.)
|
| NF L43-213-1973
| 环形接头的双外螺丝接头
| (DOUBLE UNIONS FOR CYLINDRICAL UNION.)
|
| NF L43-586-1972
| 螺钉固定光滑接头.ISO 螺纹剖面和公差
| (PLUG-IN UNIONS,TUBE END. ISO THREAD PROFILE AND TOLERANCES.)
|
| NF R13-107-1970
| 发电机电磁调节器.螺钉固定
| (ELECTROMAGNETIC REGULATORS FOR GENERATORS. SCREW MOUNTING.)
|
| NF R93-183-1980
| 电阻电焊钢螺钉、螺栓和螺母机械特性
| (MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.)
|
| NF S52-707-1994
| 高山雪橇.雪橇紧固螺钉.要求
| (ALPINE SKIS. SKI BINDING SCREWS. REQUIREMENTS.)
|
| NF S52-712-1994
| 高山雪撬.雪撬紧定螺钉.试验方法
| (Alpine skis. Ski binding srews. Test methods.)
|
| NF S52-724-1994
| 越野滑雪.雪橇捆扎螺钉.要求
| (CROSS-COUNTRY SKIS. SKI BINDING SCREWS. REQUIREMENTS.)
|
| NF S52-734-1994
| 高山滑雪.捆扎部位.试验螺钉的要求
| (ALPINE SKIS. BINDING MOUNTING AREA. REQUIREMENTS FOR TEST SCREWS.)
|
| NF S52-735-1994
| 越野滑雪.捆扎部位.试验螺钉的要求
| (CROSS-COUNTRY SKIS. BINDING MOUNTING AREA. REQUIREMENTS FOR TEST SCREWS.)
|
| NF S90-411-1988
| 外科医疗器械.外科植入物.不对称螺纹和球形底座的接骨用金属螺钉.尺寸
| (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. OSTEOSYNTHESIS METAL SCREWS WITH ASYMMETRICAL THREAD AND SPHERICAL UNDER-SURFACE. DIMENSIONS.)
|
| NF S90-414-1988
| 外科医疗器械.外科植入物.不对称螺纹和球形底座接骨用不锈钢螺丝.机械性能和试验
| (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.)
|
| NF S90-421-1989
| 外科植入物.接骨用金属螺钉.尺寸
| (Implants for surgery. Metal bone screws with conical under-surfaces. Dimensions.)
|
| NF S90-422-1989
| 外科植入物.接骨用金属板.圆锥形螺丝用的铝孔和扩孔
| (IMPLANTS FOR SURGERY. METAL BONE PLATES. HOLES AND SLOTS CORRESPONDING TO SCREWS WITH CONICAL UNDER-SURFACE.)
|
| NF S90-511-1973
| 外科医疗器械.矫形和假肢组件.带凸耳的凸圆头开槽全螺纹螺钉
| (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD. FULLY THREADED.)
|
| NF S90-512-1973
| 外科医疗器械.矫形和假肢组件.带凸耳的平圆头开槽合螺纹螺钉
| (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH FLAT SLOTTED CHEESEHEAD FULLY THREADED.)
|
| NF S90-513-1973
| 外科医疗器械.矫形和假肢组件.带安装边的凸圆头半螺纹连接螺钉
| (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD AND FLANGE,PARTLY THREADED.)
|
| NF S91-129-1996
| 拔牙钳.第1部分:螺钉和铰链接合型
| (Dental extraction forceps. Part 1 : screw and pin joint types.)
|
| 编号 | 中文名称 | 英文名称 |
|---|