| 编号 | 中文名称 | 英文名称 |
|---|
| DIN 15237-1980
| 连续机械装卸设备.将元件安装到皮带上的固定螺钉和凹垫圈
| Continuous mechanical handling equipment; seating screws and cupped washers for the attachment of components to belts
|
| DIN 16286-1997
| 符合DIN EN 837-1带连接销的G1/2B锁紧螺丝
| Screw plugs with male connection G 1/2 B according to DIN EN 837-1
|
| DIN 18182-2-1987
| 石膏板上使用的附件.板墙螺钉
| Accessories for use with gypsum plasterboards; dry wall screw
|
| DIN 2240-2-2001
| 几何产品规范(GPS).手柄.第2部分:公称直径可达40mm的量规构件.手柄、固定螺钉和卡箍
| Geometrical Product Specification (GPS) - Handles - Part 2: For gauging members over 40 mm nominal diameter; Handles, fixing screws and clamps
|
| DIN 2299-1-2003
| 产品几何量技术规范.ISO米制螺钉螺纹不过端环规.第1部分:公称直径为1至200mm.通用
| Geometrical Product Specification (GPS) - NOT GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameter from 1 mm up to 200 mm; General purposes
|
| DIN 2325-2007
| 带内细齿螺钉的旋具.扭矩测试用螺钉驱动头、量规和试样
| Screw driver for screws with internal serration - Screw driver points, gauges and test specimens for torque testing
|
| DIN 25200-1997
| 铁路车辆用螺钉、螺栓和螺母.一览表
| Screws, bolts and nuts for rail vehicles - Summary
|
| DIN 267-27-2004
| 紧固件.带粘附层的钢制螺钉、螺栓和螺柱技术规范
| Fasteners - Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications
|
| DIN 267-28-2004
| 紧固件.第28部分:带压紧层的钢制螺钉、螺栓和螺柱.技术规范
| Fasteners - Part 28: Steel screws, bolts and studs with locking coating; Technical specifications
|
| DIN 267-30-2001
| 紧固件.交货技术条件.第30部分:特性等级为10.9的米制滚丝螺钉
| Fasteners - Technical delivery conditions - Part 30: Metric thread rolling screws of property class 10.9
|
| DIN 28139-2-1985
| 搪瓷容器的焊接凸肩.M型人孔、手孔和夹紧螺钉连接的安装孔.连接尺寸
| Welding necks for glass lined vessels; form M manhole, handhole and assembly opening for clamp screw connections; connecting, dimensions
|
| DIN 28601-2000
| 延性铸铁管道和配件.螺纹套管接头.组件、套管、螺丝环、密封环和滑动环
| Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings
|
| DIN 29782-1988
| 航空航天.自由移动或螺钉锁紧的钢丝螺纹镶入件.技术规范
| Aerospace; wire thread inserts; free running or screw-locking; technical specification
|
| DIN 3124-2007
| 手动六角头螺钉用方头驱动套筒扳手
| Hand-operated socket wrenches, square drive for hexagon screws
|
| DIN 3126-2004
| 螺丝刀和连接件用传动端.尺寸
| Drive ends for screwdriver bits and connecting parts - Dimensions
|
| DIN 316-1998
| 圆形翼的蝶形螺钉
| Wing screws, rounded wings
|
| DIN 318-1999
| 翼型螺钉.有边的翼型件
| Wing crews - Edges wings
|
| DIN 3335-1968
| 加热装置的带螺丝端部的混合阀.三通混合阀.四通混合阀.公称压力6.使用温度110 ℃.安装尺寸
| Mixing valves for heating installations with screwed ends; three way mixing valves, four way mixing valves, ND 6 max. 110 °C, installation dimensions
|
| DIN 34800-2005
| 带小凸缘的外六角驱动的螺栓和螺钉
| Bolts and screws with external hexalobular driving feature with small flange
|
| DIN 34801-1999
| 大凸缘六角头驱动螺栓及螺钉
| Bolts and screws with external hexalobular driving feature with large flange
|
| DIN 34802-2001
| 大扳拧矩内六角头螺钉
| Hexalobular socket heat cap screw with large driving feature
|
| DIN 34803-2001
| 螺栓、螺钉和双头螺栓开口销与线孔
| Split pin holes and wire holes for bolts, screws and studs
|
| DIN 34810-1999
| 六角头塑料螺钉
| Plastic hexagon head screws
|
| DIN 34811-1999
| 带十字槽塑料六角头螺钉
| Plastic flat head screws with cross recess
|
| DIN 34812-1999
| 带十字槽的塑料盘头螺钉
| Plastic pan head screws with cross recess
|
| DIN 34813-1999
| 带十字槽的圆头塑料螺钉
| Plastic cross recessed cheese head screws
|
| DIN 34817-2001
| 米制螺纹焊接螺钉
| Weld screws with metric thread
|
| DIN 34819-2002
| 六角叶片套筒半沉头带卡套攻丝螺钉
| Hexalobular socket raised head tapping screws with collar
|
| DIN 34821-2005
| 12孔座的凸头螺钉
| Cheese head screws with 12 point socket
|
| DIN 34822-2005
| 带法兰的12孔座凸头螺钉
| Cheese head screws with flange with 12 point socket
|
| DIN 34823-2005
| 12孔座的半埋头螺钉
| Raised countersunk head screws with 12 point socket
|
| DIN 34824-2007
| 螺栓和螺钉用12孔座
| 12 point socket for bolts and screws
|
| DIN 34827-2005
| 内六角螺钉
| Hexalobular socket set screws
|
| DIN 4000-151-2005
| 特性表.第151部分:螺钉和螺母用手动和机动装配工具的连接部件
| Tabular layouts of properties - Part 151: Connecting parts for hand- and machine-operated assembly tools for screws and nuts
|
| DIN 4000-2 Bb.1-1999
| 零件特性图表.第2部分:螺钉和螺母.螺钉的技术标准
| Tabular layouts of article characteristics - Part 2: Screws and nuts; attribution to technical standards on screws
|
| DIN 4000-2 Bb.2-1999
| 零件特性图表.第2部分:螺钉和螺母.螺母的技术标准
| Tabular layouts of article characteristics - Part 2: Screws and nuts; attribution to technical standards on nuts
|
| DIN 404 Berichtigung 1-2007
| 开槽绞盘螺钉.DIN 404-2006技术勘误
| Slotted capstan screws, Corrigenda to DIN 404:2006-08
|
| DIN 404-2006
| 槽头绞盘螺钉
| Slotted capstan screws
|
| DIN 41673-1979
| 微型熔断器.可置换的管式熔断体用的6.3A.250V.扁平的螺丝型熔断器底座
| Miniature fuses; screw type fuse-base, 6,3 A, 250 V, flat, for interchangeable cartridge fuse-links
|
| DIN 41681-1965
| 微型熔断器.可互换的熔丝用500V至3kV的熔断器支架.螺丝盖熔断器
| Miniature fuses; fuse holder, 500 V to 3 kV, for interchangeable fuse links, fuse holder, screw caps
|
| DIN 43165-1985
| 电力牵引.空架线配件的圆端螺钉
| Electric traction; screws with cup point for overhead fittings
|
| DIN 44879-1985
| 带金属护罩的管状电加热器的连接管用的扁平六角螺母和螺钉头
| Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated
|
| DIN 4503-1-1993
| 照相机及其附件用三角架连接件.螺钉连接件
| Tripod connections for cameras and accessories; screw connections
|
| DIN 475-1-1984
| 第1部分:螺栓、螺钉、阀门和配件用扳手开口度
| Widths across flats for bolts, screws, valves and fittings
|
| DIN 48319-1962
| 带钩螺钉
| Hook screws
|
| DIN 48334-1977
| 架空电力线的松紧螺丝扣.
| Turnbuckles for overhead power lines
|
| DIN 49360-3-1986
| D型熔断器.第16部分:管接头螺钉扳手用带功能尺寸的 E 16 测量环
| D-type fuses; E 16 gauge rings with functional dimensions for adapter screw fitters
|
| DIN 502-2004
| 传动元件.用两个螺钉紧固的法兰轴承
| Driving Components - Flange bearings - Fastened with two screws
|
| DIN 503-2004
| 传动元件.用四个螺钉紧固的法兰轴承
| Driving components - Flange bearings - Fastened with four screws
|
| DIN 5042-8-1985
| 燃气灯和煤气灯.喷射器的喷射管和空气调节螺钉
| Combustion lights and gas lights; injector jet pipes and air control screws
|
| DIN 505-2004
| 传动元件.用两个螺钉紧固的带盖轴承和无盖轴承
| Driving components - Cap bearings, half bearings - Fastening with two screws
|
| DIN 506-2004
| 传动元件.用四个螺钉紧固的带盖轴承和无盖轴承
| Driving components - Cap-bearings, half bearings - Fastening with four screws
|
| DIN 5200-1987
| 槽头螺钉用双补偿改锥.尺寸
| Screwdrivers for slotted head screws, double offset; dimensions
|
| DIN 55406-2007
| 包装.聚乙烯或聚丙烯制作的单层或双层28mm螺丝盖和铝制28mm保温瓶的交货、购买和使用特殊规范
| Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)
|
| DIN 5586-1989
| 轨道车辆用压缩空气装置.带凸缘和通风的锁紧螺钉
| Compressed air equipment for rail vehicles; locking screws with collar and vent
|
| DIN 561-1995
| 六角头长圆柱端紧定螺钉
| Hexagon head set screws with small hexagon and dog point
|
| DIN 564-1995
| 六角头短圆截锥端紧定螺钉
| Hexagon head set screws with small hexagon and half dog point and flat cone point
|
| DIN 56922-1982
| 剧场工程.舞台布景方向.舞台用螺钉和手动螺钉
| Theatre engineering, stage directions scenery; stage-screws, hand screws
|
| DIN 571-1986
| 六角头木螺钉
| Hexagon head wood screws
|
| DIN 58450-1972
| 带槽扁圆头螺钉.刻度螺钉
| Slotted flat mushroom head screw; scale-screw
|
| DIN 58520-1-1994
| 绘图仪器用螺钉.第1部分:T 型螺栓
| Screws for drawing instruments; part 1: T-bolts
|
| DIN 58520-2-1996
| 绘图仪用螺钉.第2部分:半沉头螺钉
| Bolts for drawing instruments - Part 2: Deep flat countersunk bolt
|
| DIN 58530-1995
| 绘图仪用调节螺钉
| Adjusting screws for drawing instruments
|
| DIN 5903-1-1997
| 鱼尾板螺钉.第1部分:半圆头和椭圆颈
| Fish bolts - Part 1: With round head and oval neck
|
| DIN 5903-2-1997
| 鱼尾板螺钉.第2部分:方头
| Fish bolts - Part 2: With square head
|
| DIN 5914-1965
| 方头的基板螺钉
| Baseplate screws with rectangular head
|
| DIN 6305-2002
| 带固定卡式螺栓的螺丝旋杆螺母
| Tommy nuts with fixed clamping bolt
|
| DIN 6307-2002
| 带移动卡式螺栓的螺丝旋杆螺母
| Tommy nuts with movable clamping bolt
|
| DIN 6332-2003
| 带推力点的平头螺钉
| Grub screws with thrust point
|
| DIN 6367-2003
| 铣床刀杆用铣刀紧固螺丝
| Cutter retaining screws for milling machine arbors
|
| DIN 6368-1999
| 刀片固定螺钉用扳手
| Wrenches for cutter retaining screws
|
| DIN 649-1987
| T形头螺钉用的T形槽
| T-slots for T-head bolts
|
| DIN 65004-1979
| 航空和航天.长螺纹带TORQ-SET槽的盘头螺钉.
| Aerospace; pan head screws with TORQ-SET recess, long thread
|
| DIN 65055-1992
| 航空航天.带螺纹的操纵钢缆端部和松紧螺丝扣.技术规范.不适用于新设计
| Aerospace; threaded control cable ends and turnbarrels; technical specification; inactive for new design
|
| DIN 65110-1984
| 航空和航天.螺钉和螺栓的十二角头
| Aerospace; bihexagonal heads for screws and bolts
|
| DIN 65121-1992
| 航空航天.螺栓、螺钉、螺母和有关零件.供车间查看的产品一览表和选用.不适用于新设计
| Aerospace; bolts, screws, nuts and associated parts; survey and selection for workshop; inactive for new design
|
| DIN 65149-1980
| 航空和航天.非支承件用钢螺钉M3和M4.交货技术条件
| Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification
|
| DIN 65188-1986
| 航空航天.螺钉锁紧嵌件.铝合金复合材料制.带MJ螺纹.小结构封闭式.
| Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, aluminium alloy
|
| DIN 65189-1986
| 航空航天.复合材料用的铝合金制的螺钉锁紧开口式的带MJ螺纹的嵌件
| Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, aluminium alloy
|
| DIN 65190-1986
| 航空和航天.复合材料用的铝合金制的螺钉锁紧封闭式的带MJ螺纹的嵌件
| Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, aluminium alloy
|
| DIN 65191-2002
| 航空航天.有螺纹的零件浮动和螺钉锁紧的带MJ螺纹的耐腐蚀钢制复合材料用插入件
| Aerospace - Inserts for composite materials with MJ thread, threaded part floating and screw-locking, corrosion-resisting steel
|
| DIN 65197-1989
| 航空航天.制螺钉用的钛合金圆棒料及线材.尺寸和质量
| Aerospace; titanium alloy round bars and wire for screw stock; dimensions, masses
|
| DIN 65253-2002
| 带内细齿的螺钉用的L形扳手
| L-wrench for screws with internal serration
|
| DIN 65254-2002
| 六角嵌入式刀头.带内细齿的螺钉
| Hexagon insert bits - For screws with internal serrations
|
| DIN 65267-1992
| 航空和航天.温度235℃以下、螺纹接近于头部的、标称抗拉强度900MPa的带MJ螺纹的六角螺钉
| Aerospace; screws, hexagon, with MJ thread, threaded approximately to head, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
|
| DIN 65269-1987
| 航空航天.公称抗拉强度900MPa 使用温度为235以下的钢制短螺纹长度MJ螺纹的带筋状翼形的扭矩调节十字槽头紧
| Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel, nominal tensile strength 900 MPa, for temperatures up to 235 °C
|
| DIN 65284-1987
| 航空航天..公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制全螺纹的MJ螺纹的带筋状翼形的扭矩调节十字
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
|
| DIN 65285-1987
| 航空航天.公称抗拉强度1100MPa使用温度为425℃以下的耐腐蚀钢制短螺纹长度MJ螺纹的带有筋状翼形的扭矩调节
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, corrosion-resisting steel, nominal tensile strength 1100 MPa, for temperatures up to 425 °C
|
| DIN 65286-1987
| 航空航天.抗拉强度900MPa 使用温度为235以下的钢制短螺纹长度MJ螺纹的带筋状翼形的扭矩调节十字槽头埋头螺
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 900 MPa, for temperatures up to 235 °c
|
| DIN 65289-1987
| 航空和航天.公称抗拉强度1100MPa使用温度为315℃以下的钛合金制短螺纹长度MJ螺纹的带有筋状翼形的扭矩调节
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 °C
|
| DIN 653-2006
| 短型滚花大头螺钉
| Knurled thumb screws, low type
|
| DIN 65307-1986
| 航空航天.复合材料用小型闭式螺钉锁紧带MJ螺纹耐腐蚀钢制衬套
| Aerospace; inserts for composite materials, with MJ thread, closed type, light weight, screw-locking, corrosion-resisting steel
|
| DIN 65308-1986
| 航空航天.复合材料用开口式用螺钉锁紧带MJ螺纹的耐腐蚀钢制衬套
| Aerospace; inserts for composite materials, with MJ thread, open type, screw-locking, corrosion-resisting steel
|
| DIN 65309-1986
| 航空航天.复合材料用闭式用螺钉锁紧带MJ螺纹的耐腐蚀钢制衬套
| Aerospace; inserts for composite materials, with MJ thread, closed type, screw-locking, corrosion-resisting steel
|
| DIN 65317-1987
| 航空航天.公称抗拉强度1100MPa使用温度为235℃以下的钢制短螺纹长度MJ螺纹的带有筋状翼形的扭矩调节十字槽
| Aerospace; countersunk head screws with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, steel; nominal tensile strength 1100 MPa, for temperatures up to 235 °C
|
| DIN 65349-2001
| 航空航天.米制螺纹螺母和相关螺钉部件锁扭矩试验.试验方法
| Aerospace - Testing of locking torques for nuts and related threaded parts, with metric screw thread - Test methods
|
| DIN 65393-2002
| 航空航天.环箍锁紧和螺钉锁紧的钢制带MJ螺纹的螺纹插入件.分类:900 MPa/1100 MPa/1250 MPa/1550 MPa/235℃
| Aerospace - Thread inserts with MJ thread, ring locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/235 °C
|
| DIN 65394-2003
| 航空航天.耐腐蚀钢制带环锁和MJ螺纹的螺钉锁紧的丝套.等级:900 MPa/1100MPa/1250 MPa/1550 MPa/315鳦/425鳦
| Aerospace - Thread inserts, with MJ thread, ring locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/1250 MPa/1550 MPa/315 °C/425 °C
|
| DIN 65397-2003
| 航空航天.耐腐蚀钢制带MJ螺纹的闭锁、螺钉锁紧的丝套.等级:1100MPa/315℃/425℃
| Aerospace - Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 1100 MPa/315 °C/425 °C
|
| DIN 65398-2003
| 航空航天.耐腐蚀钢制带MJ螺纹的闭锁、螺钉锁紧的丝套.等级:900MPa/1100 MPa/315℃
| Aerospace - Thread inserts, with MJ thread, locked, screw-locking, corrosion-resisting steel; Classification: 900 MPa/1100 MPa/315 °C
|
| DIN 65451-2003
| 航空航天.带MJ螺纹的闭锁、螺钉锁紧的钢制丝套.等级:900MPa/1100 MPa/235℃
| Aerospace - Thread inserts, with MJ thread, locked, screw-locking, steel; Classification: 900 MPa/1100 MPa/235 °C
|
| DIN 65522-1984
| 航空和航天.带MJ螺纹、螺纹接近头部、耐蚀钢制、标称抗拉强度700MPa、温度425℃以下六角头螺钉
| Aerospace; screws, hexagon, with MJ-thread, threaded opproximatley to head, corrosion-resisting steel, nominal tensile strength 700 MPa, for temperatures up to 425 °C
|
| DIN 65533-1987
| 航空航天.螺栓、螺钉和螺母.材料的分配及表面处理.推荐性选择
| Aerospace; bolts, screws and nuts; allocation of materials and surface treatments; recommended selection
|
| DIN 65542-1987
| 航空航天.公称抗拉强度1250MPa使用温度为315℃/425℃以下的镍合金制短螺纹长度MJ螺纹的带有筋状翼形的扭矩
| Aerospace; countersunk head screws, close tolerance, with ribbed TORQ-SET (ACR) recess and MJ thread, short thread length, nickel alloy, nominal tensile strength 1250 MPa, for temperatures up to 315 °C/425 °C
|
| DIN 65557-1989
| 航空和航天.公称抗拉强度1100MPa.使用温度在315℃以下钛合金制全攻螺纹MJ螺纹的带肋翼的扭矩调节十字槽盘头
| Aerospace; pan head screws with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
|
| DIN 65558-1989
| 航空航天.公称抗拉强度1100MPa.使用温度在315℃以下钛合金制全攻螺纹MJ螺纹的带肋翼的扭矩调节十字槽沉头螺
| Aerospace; countersunk head screws, with ribbed TORQ-SET (ACR) recess and MJ thread, fully threaded, titanium alloy; nominal tensile strength 1100 MPa, for temperatures up to 315 °C
|
| DIN 68345-1968
| 手柄和扫帚用螺钉连接.螺帽与螺塞
| Screwed connection for handles and brooms; screw cap and screw plug
|
| DIN 68856-5-1983
| 家具用五金件.家具装配附件术语.高度调节螺钉、家具腿、底架
| Hardware for furniture; terms for furniture fittings; height adjusters, furniture legs, underframes
|
| DIN 6900-5-2004
| 粗牙螺纹螺钉和垫圈组件.第5部分:带锥形弹簧垫圈
| Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer
|
| DIN 69051-1-1989
| 机床.球形螺钉.术语.标记系统
| Machine tools; ball screws; terminology, designation system
|
| DIN 69051-3-1989
| 机床.球形螺钉.验收条件及验收试验
| Machine tools; ball screws; acceptance conditions and acceptance tests
|
| DIN 69051-5-2002
| 机床.球形螺钉.第5部分:球形螺母的安装尺寸
| Machine tools - Ball screws - Part 5: Mounting dimensions for ball nuts
|
| DIN 6908-1995
| 螺钉和垫圈组件用锥形弹簧垫圈
| Conical spring washers for screw and washer assemblies
|
| DIN 6911-2004
| 带导销的六角凹头螺丝扳手
| Hexagon socket screw keys with pilot
|
| DIN 6912-2002
| 内六角中心低圆柱头螺钉
| Hexagon socket head cap screws with centre, with low head
|
| DIN 6928-2002
| 六角凸缘自攻螺钉
| Hexagon washer head tapping screws
|
| DIN 70614-1989
| 汽车制造.小宽度扳手开口度六角头螺钉(不适于新结构)
| Automotive engineering; hexagon head screws with small widths across flats (not for new constructions)
|
| DIN 71436-1989
| 橄榄形压紧联接器.与管接头配用的空心螺钉管接头和环形管接头
| Compression couplings with olives; hollow screw fittings and ring connection fittings for use with union nuts
|
| DIN 71989-1982
| 控制钢丝绳的调整螺钉
| Adjusting screws for cables for controls
|
| DIN 72331-1-1979
| 起动机蓄电池用电缆连接器.第1部分:最大可达70平方毫米的导线截面用螺丝接线端
| Cable connectors for starter batteries; screw terminals for conductor cross sections up to 70 mm<(hoch)2>
|
| DIN 72331-2-1979
| 起动机蓄电池用电缆连接器.第2部分:导线截面范围为 50 - 120 平方毫米的螺丝接线端
| Cable connectors for starter batteries; screw terminals for conductor cross sections from 50 to 120 mm<(hoch)2>
|
| DIN 72786-2-1990
| 汽车挡风玻璃刮水器.雨刮臂.螺丝固定C型刮水片
| Windscreen and rear window wiper systems for road vehicles; wiper arm and blade assembly; type C wiper blade for screw fastening
|
| DIN 73368-1986
| 燃料喷射装置的溢流阀和空心螺钉
| Overflow valves and hollow screw for fuel injection devices
|
| DIN 74-2003
| DIN EN 27721规定的沉头螺钉埋头孔(带钉头沉头螺钉除外)
| Countersinks for countersunk head screws except countersunk head screws with heads according to DIN EN 27721
|
| DIN 7422-2002
| 手动式六角凹头螺钉用方形驱动刀头
| Bits with square drive for hexagon socket screws, hand operated
|
| DIN 7433-1978
| 用于棘轮螺钉旋具的内六角插头的适配器
| Adapters for Hexagon Insert Bits for Use with Spiral Ratchet Drivers
|
| DIN 7500-1-2007
| 表面淬火和回火的ISO米制螺纹滚丝螺钉.第1部分:型号、命名和符号及要求
| Case hardened and tempered thread rolling screws for metric ISO thread - Part 1: Types, designation, requirements
|
| DIN 7500-2-1984
| ISO 米制螺纹用螺纹压制螺钉.孔直径的指导值
| Thread rolling screws for ISO metric thread; guideline values for hole diameters
|
| DIN 7513-1995
| 螺纹切削螺钉.六角头螺钉和槽头螺钉.尺寸、要求、检验
| Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing
|
| DIN 7516-1995
| 十字槽螺纹切削螺钉.尺寸、要求和检验
| Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing
|
| DIN 7643-2005
| 压紧联轴节.环形鼓形管用空心螺钉
| Compression couplings - Hollow screws for ring-type banjos
|
| DIN 787-2005
| T型槽用螺栓和螺钉
| Bolts and screws for T-slots
|
| DIN 792-1976
| 圆柱形沉头螺钉
| Cylindrical counter sunk screws
|
| DIN 7975-1989
| 自攻螺钉的连接.芯孔直径的参比值和用途.
| Tapping screw connections; guideline values for core hole diameters and use
|
| DIN 7984-2002
| 内六角低圆柱头螺钉
| Hexagon socket head cap screws with low head
|
| DIN 7995-1984
| 十字槽半沉头木螺钉
| Cross recessed raised countersunk head wood screws
|
| DIN 7996-1986
| 十字槽盘头木螺钉
| Cross recessed pan head wood screws
|
| DIN 7997-1984
| 十字槽沉头木螺钉
| Cross recessed countersunk head wood screws
|
| DIN 7998-1975
| 木螺钉用螺纹和螺纹端
| Threads and Thread Ends for Wood Screws
|
| DIN 81402-1978
| 螺钉安装的船舱门用铰链
| Hinges for ship's cabinet doors, for screwing-on
|
| DIN 8243-1969
| 精密仪器的槽头圆头螺钉.M 0.3至M 1.4
| Slotted Cheese Head Screws for Fine Mechanics; M 0.3 to M 1.4
|
| DIN 8245-1972
| 精密仪器用槽头沉头螺钉.M 0.4至M 1.4
| Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4
|
| DIN 8272-1982
| 手表和钟表摆轮的螺钉
| Balance-screws for watches and clocks
|
| DIN 8374-2006
| 沉头螺钉安装沉孔和通孔用的带平行钻柄的多刃阶梯麻花钻
| Subland twist drills with parallel shank for clearance holes and countersinks for countersunk head screws
|
| DIN 8375-2006
| 沉头螺钉安装沉孔和通孔用的带莫氏锥柄的多刃阶梯麻花钻
| Subland twist drills with Morse taper shank for clearance holes and countersinks for countersunk head screws
|
| DIN 8376-2006
| 内六角头圆头螺钉和一字槽圆头螺钉安装通孔和沉孔用直柄多刃阶梯麻花钻
| Subland twist drills with parallel shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
|
| DIN 8377-2006
| 内六角头圆头螺钉和一字槽圆头螺钉安装通孔和沉孔用莫氏锥柄多刃阶梯麻花钻
| Subland twist drills with Morse taper shank for clearance holes and counterbores for hexagon socket head cap screws and slotted cheese head screws
|
| DIN 85339-1996
| 带台阶和外六角锁紧螺钉.锁紧头和排放孔
| Hexagon head screw plugs - With retaining pin and bleeding hole
|
| DIN 87314-1987
| 泄水口螺钉堵头用的外四方扳手
| Male square wrenches for drain screws
|
| DIN 89284-2007
| 符合DIN 89280的安装孔和密封管用帽螺钉.德文和英文本
| Cap srews for mounting holes and glands according to DIN 89280; Text in German and English
|
| DIN 89300-1995
| 16 A、500 V 额定载面最大可达 2.5 平方毫米的带紧固螺丝的终端连接器
| Terminal connectors with clamping-screw, 16 A, 500 V, for nominal cross-sectional areas up to 2,5 mm<(hoch)2>
|
| DIN 898-1995
| 螺钉和螺母的装配工具.概述、术语和定义
| Assembly tools for screws and nuts - Survey, terms and definitions
|
| DIN 920-2006
| 小盘开槽平头螺钉
| Slotted pan head screws with small head
|
| DIN 921-2007
| 开槽大圆盘头螺钉
| Slotted pan head screws with large head
|
| DIN 923-2006
| 带肩的平头槽头螺钉
| Slotted pan head screws with shoulder
|
| DIN 924-2006
| 带全蜗杆槽头半沉头螺钉
| Slotted raised countersunk head screws with full dog point
|
| DIN 925-2006
| 带全蜗杆开槽沉头螺钉
| Slotted countersunk head screws with full dog point
|
| DIN 927-2006
| 带肩槽头螺钉
| Slotted shoulder screws
|
| DIN 931 Bb.1-1986
| 带杆六角头螺钉.重量
| Hexagon head bolts with shank; masses
|
| DIN 95-1986
| 带槽半沉头木螺钉
| Slotted raised countersunk (oval) head wood screws
|
| DIN 96-1986
| 带槽圆头木螺钉
| Slotted round head wood screws
|
| DIN 962-2001
| 螺栓、螺钉、双头螺栓和螺母.标识、型号和精整
| Bolts, screws, studs and nuts - Designation, types and finishes
|
| DIN 967-2002
| 带卡套十字槽盘头螺钉.产品等级A
| Cross recessed pan head screws with collar - Product grade A
|
| DIN 968-2002
| 带卡套十字槽盘头自攻螺钉
| Cross recessed pan head tapping screws with collar
|
| DIN 97-1986
| 带槽沉头（平）木螺钉
| Slotted countersunk (flat) head wood screws
|
| DIN 974-1-1991
| 六角凹头有帽螺钉和圆头螺钉或大柱头螺钉用沉孔直径.第1部分:制造尺寸
| Diameters of counterbores for hexagon socket head cap screws and screws with cheese head or pan head; manufacturing dimensions
|
| DIN 974-2-1991
| 六角螺栓、螺钉和螺母用沉头孔直径.制造尺寸
| Diameters of counterbores for hexagon bolts, screws and nuts; manufacturing dimensions
|
| DIN 9841-1980
| 冲压工具用的带内六角套筒头有肩螺钉
| Hexagon socket head shoulder screw for press tools
|
| DIN EN 14512-2006
| 危险货物运输用容器.液体化学物品运输的容器设备.绕轴旋转螺钉的铰链人孔盖和颈环
| Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts; English version of DIN EN 14512:2006-10
|
| DIN EN 20225-1992
| 紧固件.螺钉、螺柱和螺母.尺寸符号和标示(ISO 225-83)
| Fasteners; bolts, screws, studs and nuts; symbols and designations of dimensioning (ISO 225:1983); german version EN 20225:1991
|
| DIN EN 20273-1992
| 紧固件.螺栓和螺钉的间隙孔(ISO 273-1979)
| Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991
|
| DIN EN 20898-7-1995
| 紧固件的机械性能.第7部分:公称直径为 1 mm - 10 mm 的螺栓和螺钉的扭力试验和最小扭矩 (ISO 898-7:1992);
| Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm (ISO 898-7:1992); German version EN 20898-7:1995
|
| DIN EN 2363-1989
| 航空航天.操纵钢索松紧螺丝扣的固定夹子.尺寸
| Aerospace series; locking clips for turnbuckles of control cables; dimensions
|
| DIN EN 24766-1992
| 平端槽头止动螺钉
| Slotted set screws with flat point (ISO 4766:1983); german version EN 24766:1992
|
| DIN EN 2569-1992
| 航空航天系列.操纵钢缆接头和松紧螺丝扣.技术规范
| Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991
|
| DIN EN 2583-1997
| 航空航天系列.耐高温镍基合金(因科镍合金718)MJ螺纹螺钉.等级:1275MPa(室温)/650℃.交货技术条件
| Aerospace series - Bolts, MJ threads, in heat resisting nickel base alloy, NI-PH2601 (Inconel 718); classification: 1275 MPa (at ambient temperature)/650 °C; technical specification; German version EN 2583:1997
|
| DIN EN 26157-1-1991
| 紧固件.表面缺陷.符合一般要求的螺栓、螺钉和螺柱(ISO 6157-1-88)
| Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991
|
| DIN EN 26157-3-1991
| 紧固件.表面缺陷.特殊要求用螺栓、螺钉和螺柱
| Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991
|
| DIN EN 2649-1995
| 航空航天系列.镀镉合金钢全螺纹带槽大柱头螺钉.等级:900MPa(室温下)/235°C; 德文版本 EN 2649:1995
| Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2649:1995
|
| DIN EN 2650-1996
| 航空航天.钝化耐蚀钢螺纹长度接近顶部带槽平头螺丝.等级:600 MPa(室温)/425℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C ; German version EN 2650:1996
|
| DIN EN 2651-1996
| 航空航天系列.镀锡黄铜制螺纹接近顶部带槽平头螺丝.等级:300MPa(室温)/80℃
| Aerospace series - Screws, pan head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2651:1996
|
| DIN EN 2652-1997
| 航空航天系列.镀镉合金制螺纹接近顶部带槽的100度沉头螺丝.等级900MPa(室温)/235℃
| Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2652:1997
|
| DIN EN 2653-1996
| 航空航天系列.钝化耐蚀钢螺纹长度接近顶部带槽100度沉头螺丝.等级:600 MPa(室温)/425℃
| Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German version EN 2653:1996
|
| DIN EN 2654-1996
| 航空航天系列.镀锡黄铜螺纹接近顶部带槽100度沉头螺丝.等级:300MPa(室温)/80℃
| Aerospace series - Screws, 100° countersunk normal head, slotted, threaded to head, in brass, tin plated - Classification: 380 MPa (at ambient temperature)/80 °C; German version EN 2654:1996
|
| DIN EN 27434-1992
| 锥形端槽头止动螺钉
| Slotted set screws with cone point (ISO 7434:1983); german version EN 27434:1992
|
| DIN EN 27435-1992
| 长圆柱末端的槽头止动螺钉
| Slotted set screws with long dog point (ISO 7435:1983); german version EN 27435:1992
|
| DIN EN 27436-1992
| 凹端槽头止动螺钉
| Slotted set screws with cup point (ISO 7436:1983); german version EN 27436:1992
|
| DIN EN 27721-1992
| 沉头螺钉.沉头形状和测量(ISO 7721-1983)
| Countersunk head screws; head configuration and gauging (ISO 7721:1983); german version EN 27721:1991
|
| DIN EN 2870-1996
| 航空航天系列.钛合金阳极化MoS2润滑十二角紧配合螺丝.等级 1100MPa(室温)/315℃
| Aerospace series - Bolts, normal bihexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2870:1996
|
| DIN EN 2874-1996
| 航空航天系列.钝化耐高温镍基合金中长螺纹十二角紧配合螺丝.等级 1550MPa(室温)/315℃
| Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1550 MPa (at ambient temperature)/315 °C; German version EN 2874:1996
|
| DIN EN 28839-1991
| 紧固件的机械性能.有色金属制造的螺栓、螺钉、螺柱和螺母
| Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991
|
| DIN EN 2884-1996
| 航空航天系列.MoS2润滑阳极化钛合金短螺纹带翼型十字槽平头螺钉.等级:1100MPa(室温)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 2884:1996
|
| DIN EN 2885-1996
| 航空航天系列.镀镉合金钢短螺纹带翼型十字槽平头螺钉.等级:900MPa(室下)/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated, classification: 900 MPa (at ambient temperature)/235 °C; German version EN 2885:1996
|
| DIN EN 2886-1996
| 航空航天系列.镀铬合金钢短螺纹带翼形十字槽的平头紧配合螺丝.等级:900MPa/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa/235 °C; German version EN 2886:1996
|
| DIN EN 2888-2007
| 航空航天系列.钝化耐腐蚀短螺纹标准杆粗公差普通六角头米制螺钉.等级:600MPa(室温下)/425℃
| Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C; German and English version EN 2888:2006
|
| DIN EN 2889-2007
| 航空航天系列.镀镉合金钢短螺纹粗公差普通六角头米制螺钉.等级:900MPa(室温下)/235℃;德文和英文版本 EN 28
| Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 2889:2006
|
| DIN EN 2897-1996
| 航空航天系列.镀铬合金钢短螺纹带翼形十字槽的平头紧配合螺丝.等级:1100MPa/235℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa/235 °C; German version EN 2897:1996
|
| DIN EN 2926-1996
| 航空航天系列.耐高温钢FE-FA92HT(A286制镀银长螺纹细螺杆十二角螺丝钉.等级:900 Mpa(室温)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2926:1996
|
| DIN EN 2927-1996
| 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温)/650℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2927:1996
|
| DIN EN 2928-1996
| 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)镀银长螺纹细螺杆十二角螺丝钉.等级:1275 Mpa(室温)/650
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated - Classification: 1275 MPa (at ambient temperature)/650 °C; German version EN 2928:1996
|
| DIN EN 2929-1996
| 航空航天系列.耐高温镍基合金NI-P100HT(因康镍 718)制长螺纹细螺杆十二角螺丝钉.等级:1210 Mpa(室温)/730℃
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730 °C; German version EN 2929:1996
|
| DIN EN 2930-1996
| 航空航天系列.耐高温镍基合金NI-P101HT(Waspaloy 一种耐高温热镍基合金)镀银长螺纹细螺杆十二角螺丝钉.等级
| Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1210 MPa (at ambient temperatur)/730 °C; German version EN 2930:1996
|
| DIN EN 2932-1996
| 航空航天系列.耐高温钢FE-PA92HT(A286)镀银长螺纹细螺杆T字头螺丝钉.等级:900 Mpa(室温)/650℃
| Aerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2932:1996
|
| DIN EN 2937-1994
| 航空航天系列.耐高温钢 FE-PA92HT(A286) 全螺纹六角头螺钉.等级:900 MPa (室温)摄氏 650 度; 德文版本 EN 2
| Aerospace series - Screws, hexagon-head, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2937:1994
|
| DIN EN 2938-1995
| 航空航天系列.镀银耐高温钢(FE-PA92HT(A286)全螺纹六角头螺钉.等级:900MPa(室温)/650℃; 德文版本 EN 2938:
| Aerospace series - Screws, hexagon head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2938:1995
|
| DIN EN 2939-1994
| 航空航天系列.耐高温钢 FE-PA92HT(A286) 全螺纹翼型十字槽 100 度沉头螺钉.等级:900 MPa (室温)摄氏 650 度
| Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2939:1994
|
| DIN EN 2940-1995
| 航空航天系列.镀银耐高温钢FE-PA92HT(A286)全螺纹偏置十字槽100度沉头螺钉.等级:900 MPa(室温)/650℃; 德文
| Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 2940:1995
|
| DIN EN 3006-1994
| 航空航天系列.耐高温钢 FE-PA92HT(A286) 轻柄长螺纹六角头螺钉.等级:900MPa (温度) 摄氏 650 度; 德文版本
| Aerospace series - Screws, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3006:1994
|
| DIN EN 3007-1996
| 航空和航天.耐高温钢FE-PA92HT(A286)制镀银长螺纹细杆六角螺丝钉.等级900MPa(室温下)/650℃
| Aerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C; German version EN 3007:1996
|
| DIN EN 3035-1996
| 航空航天系列.合金钢镀镉短螺纹带翼型十字槽的100度沉头配合螺钉.等级:1100MPa(室温)/235℃
| Aerospace series - 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa(at ambient temperature)/235 °C; German version EN 3035:1996
|
| DIN EN 3037-1996
| 航空航天系列.钛合金钢阳极处理MoS<2>锻造短螺纹带翼型十字槽平头配合螺钉.等级:1100MPa(室温)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized MoS<(Index)2> lubricated - Classification: 1100 MPa(at ambient temperature)/315 °C; German version EN 3037:1996
|
| DIN EN 3038-1996
| 航空航天系列.耐蚀耐高温钢钝化处理短螺纹带翼型十字槽的平头配合螺钉.等级:1100MPa(室温)/425℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3038:1996
|
| DIN EN 320-1993
| 纤维板.螺钉轴向拔出力测定
| Fibreboards; determination of resistance to axial withdrawal of screws; German version EN 320:1993
|
| DIN EN 3218-001-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第001部分:技术规范
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 001: Technical specification; German and English version EN 3218-001:2006
|
| DIN EN 3218-002-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第002部分:性能和接触方式规范
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements; German and English version EN 3218-002:2006
|
| DIN EN 3218-005-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第005部分:不可拆卸的尺寸为22的焊式接触件插头.产品标准
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 005: Plug with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-005:2006
|
| DIN EN 3218-006-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第006部分:不可拆卸的尺寸为22的焊式接触件插座.产品标准
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 006: Receptacle with non-removable size 22 solder contacts - Product standard; German and English version EN 3218-006:2006
|
| DIN EN 3218-007-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第007部分:后部抽取式尺寸为20的卷曲触点插头.产品标准
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 007: Plug with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-007:2006
|
| DIN EN 3218-008-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第008部分:后部抽取式尺寸为20的卷曲触点插座.产品标准
| Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 008: Receptacle with rear-removable size 20 crimp contacts - Product standard; German and English version EN 3218-008:2006
|
| DIN EN 3218-009-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第009部分:EN 3218-005和EN 3218-007连接器的防护罩.产品标准
| Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 009: Protective covers for EN 3218-005 and EN 3218-007 connectors - Product standard; German and English version EN 3218-009:2006
|
| DIN EN 3218-010-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第010部分:EN 3218-006和EN 3218-008连接器的防护罩.产品标准
| Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 010: Protective covers for EN 3218-006 and EN 3218-008 connectors - Product standard; German and English version EN 3218-010:2006
|
| DIN EN 3218-011-2006
| 航空航天系列.金属壳和螺钉锁紧的矩形连接器.第011部分:EN EN 3218-005至EN 3218-008连接器的插入萃取工具.
| Aerospace series - Connectors, rectangular, with metallic shells and screws-locking - Part 011: Tool, insert extraction for EN 3218-005 to EN 3218-008 connectors - Product standard; German and English version EN 3218-011:2006
|
| DIN EN 3303-1997
| 航空航天系列.镀镉合金钢中等螺纹长度内六角圆柱形螺钉.等级:1100MPa(室温)/235℃
| Aerospace series - Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3303:1997
|
| DIN EN 3304-1996
| 航空航天系列.钛合金阳极处理MoS<2>锻造短螺纹带翼型十字槽带小头100度沉头配合螺钉.等级:1100MPa(室温)/31
| Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance shank, short thread, in titanium alloy, MoS<(Index)2> lubricated, classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3304:1996
|
| DIN EN 3305-1996
| 航空航天系列.合金钢镀镉短螺纹带翼型十字槽带小头100度沉头配合螺钉.等级:1100MPa(室温)/235℃
| Aerospace series - Screws, 100° countersunk head, offset cruciform recess, close tolerance shank, short thread, in alloy steel, cadmium plated; classification: 1100 MPa (at ambient temperature)/235 °C; German version EN 3305:1996
|
| DIN EN 3306-1996
| 航空航天系列.钛合金阳极化MoS2润滑短螺纹接近顶点带翼形十字槽的100度沉头螺丝.等级: 1100MPa/315℃
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3306:1996
|
| DIN EN 3307-1996
| 航空航天系列.钛合金阳极处理MoS<2>锻造螺纹接近根部带翼型十字槽平头螺钉.等级:1100MPa(室温)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3307:1996
|
| DIN EN 3308-1996
| 航空航天系列.钛合金阳极化MoS2润滑螺纹接近顶点的六角螺丝.等级:1100MPa/315℃
| Aerospace series - Screws, normal hexagonal head, threaded to head, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3308:1996
|
| DIN EN 3381-1996
| 航空航天系列.钛阳极处理MoS<2>锻造短螺纹带翼型十字槽100度沉头配合螺钉.等级:1100MPa(室温)/315℃
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3381:1996
|
| DIN EN 3543-1997
| 航空航天系列.钝化耐蚀耐高温钢短螺纹带翼形十字槽100度沉头紧配合螺丝.等级:1100MPa/425℃
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3543:1997
|
| DIN EN 3725-2005
| 航空航天系列.MoS2涂覆的阳极化处理的钛合金TI-P64001制长螺纹标准杆六凸角凹口盘头螺钉.强度等级:1100 MPa
| Aerospace series - Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Strength class: 1100 MPa (at ambient temperature); German and English version EN 3725:2004
|
| DIN EN 3740-1996
| 航空航天系列.钛合金阳极处理MoS<2>锻造短螺纹小头六角配合螺钉.等级:1100MPa(室温)/315℃
| Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/315 °C; German version EN 3740:1996
|
| DIN EN 3759-1996
| 航空航天系列.耐蚀耐高温钢钝化螺纹接近根部带翼型十字槽平头螺钉.等级:1100MPa(室温)/425℃
| Aerospace series - Screws, pan head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3759:1996
|
| DIN EN 3760-1996
| 航空航天系列.耐蚀耐高温钢钝化螺纹接近根部带翼型十字槽100度沉头螺钉.等级:1100MPa(室温)/425℃
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425 °C; German version EN 3760:1996
|
| DIN EN 3820-2007
| 航空航天系列.MoS2润滑的阳极化钛合金短螺纹标准杆粗公差普通六角头米制螺钉.等级:1100MPa(室温下)/315℃
| Aerospace series - Metric bolts, normal hexagon head, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS<(Index)2> lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 3820:2006
|
| DIN EN 4304-2007
| 航空航天系列.钝化防腐蚀钢制带埋头剪切螺钉用管状管套(内壁厚度0.２5mm)
| Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness); German and English version EN 4304:2005
|
| DIN EN 4306-2007
| 航空航天系列.钝化防腐蚀钢制带埋头拉紧螺钉用套筒(0.50 mm 壁厚)
| Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4306:2005
|
| DIN EN 4307-2007
| 航空航天系列.钝化防腐蚀钢制带埋头剪切螺钉用管状管套(内壁厚度0.5mm)
| Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness); German and English version EN 4307:2005
|
| DIN EN 4323-2006
| 航空航天系列.钛合金TI-P64001制的六瓣凹槽、全杆螺纹、阳极氧化、镀MoS2的100°沉头螺钉.等级:900MPa(室温
| Aerospace series - Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS<(Index)2> coated - Classification: 900 MPa (at ambient temperature)/350 °C; German and English version EN 4323:2004
|
| DIN EN 4496 Berichtigung 1-2007
| 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中短螺纹紧公差标准螺杆的100°标准沉头偏置十字凹槽螺钉.
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005, Corrigenda to DIN EN 4496:2006-08; German and English version EN 4496:2005/AC:2006
|
| DIN EN 4496-2006
| 航空航天系列.十字凹槽、紧公差标准杆、短螺纹、100标准埋头钛合金阳极铝覆层螺钉.分类:1100 MPa(环境温度)
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German and English version EN 4496:2005
|
| DIN EN 4497-2007
| 带铝有色涂层阳极电镀钛合金短螺纹紧公差标称柄偏位十字凹槽平头螺钉.分类:1100MPa(室温)/315℃
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature)/315 °C; German and English version EN 4497:2005
|
| DIN EN 4509-2007
| 航空航天系列.带有色热镀铝覆层阳极氧化的钛合金中螺纹延伸到螺头100°沉头偏置十字凹槽螺钉、米制系列.等
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temperature) / 315 °C; German and English version EN 4509:2006
|
| DIN EN 60169-25-1994
| 射频连接器.第25部分:外导体直径为13.56mm(0.534in)(TWHN型)双内导体屏蔽平衡电缆配(3/4-20UNEF)双极螺丝偶
| Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (type TWHN) (IEC 60169-25:1992); German version EN 60169-25:1993
|
| DIN EN 60745-2-2-2007
| 手持式电动工具.安全性.第2-2部分:电动螺丝刀和冲击扳手的特殊要求
| Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches (IEC 60745-2-2:2003, modified); German version EN 60745-2-2:2003 + A11:2007
|
| DIN EN 60999-1-2000
| 连接装置.铜导线.螺钉式和非螺钉式夹紧装置安全性要求.第1部分:0.2mm以上至35mm(含35mm)导线
| Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 1:General requirements and particular requirements for clamping units for conductors 0,2 mm<(hoch)2> up to 35 mm<(hoch)2> (included) (IEC 60999-1:1999, modified); German version EN 60999-1:2000
|
| DIN EN 61076-2-101-2006
| 电子设备连接器.第2-101部分:圆形连接器.低压设备用带螺钉或弹簧锁紧的M8圆形连接器、带螺钉锁紧的M12圆形
| Connectors for electronic equipment - Part 2-101: Circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications (IEC 61076-2-101:2003 + A1:2006); German version EN 61076-2-101:2003 + A1:2006
|
| DIN EN ISO 10510-1999
| 自攻螺钉和平垫圈组合件
| Tapping screw and washer assemblies with plain washers (ISO 10510:1999); German version EN ISO 10510:1999
|
| DIN EN ISO 10642-2004
| 内六角埋头螺钉
| Hexagon socket countersunk head screws (ISO 10642:2004); German version EN ISO 10642:2004
|
| DIN EN ISO 10644-1998
| 带普通垫圈的螺钉和垫圈组件.垫圈硬度级别为200HV和300HV
| Screw and washer assemblies with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:1998); German version EN ISO 10644:1998
|
| DIN EN ISO 10664-2005
| 螺栓和螺钉用内板拧的六角花形
| Hexalobular internal driving feature for bolts and screws (ISO 10664:2005); German version EN ISO 10664:2005
|
| DIN EN ISO 10666-2000
| 自钻自攻螺钉.机械和功能特性
| Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999
|
| DIN EN ISO 10666-2000
| 自钻自攻螺钉.机械和功能特性
| Drilling screws with tapping screw thread - Mechanical und functional properties (ISO 10666:1999); German version EN ISO 10666:1999
|
| DIN EN ISO 10669-1999
| 自攻螺钉和垫圈组合件用平垫圈.标准和大系列.产品等级A级
| Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999); German version EN ISO 10669:1999
|
| DIN EN ISO 10673-1998
| 螺钉和垫圈组件用普通垫圈.小系列、标准系列和大系列.产品等级A
| Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:1998); German version EN ISO 10673:1998
|
| DIN EN ISO 1207-1994
| 开槽圆柱头螺钉.产品等级 A (ISO 1207:1992); 德文版本 EN ISO 1207:1994
| Slotted cheese head screws - Product grade A (ISO 1207:1992); German version EN ISO 1207:1994
|
| DIN EN ISO 14579-2002
| 圆柱头内六角螺钉 (ISO 14579:2001); 德文版本 EN ISO 14579:2001
| Hexalobular socket head cap screws (ISO 14579:2001); German version EN ISO 14579:2001
|
| DIN EN ISO 14580 Berichtigung 1-2006
| 内六角圆头螺钉.DIN EN ISO 14580-2002的技术勘误
| Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001, Corrigenda to DIN EN ISO 14580:2002-05; German version EN ISO 14580:2001/AC:2005
|
| DIN EN ISO 14580-2002
| 凸头内六角螺钉 (ISO 14580:2001); 德文版本 EN ISO 14580:2001
| Hexalobular socket cheese head screws (ISO 14580:2001); German version EN ISO 14580:2001
|
| DIN EN ISO 14583 Berichtigung 1-2006
| 内六角盘头螺钉.DIN EN ISO 14853-2002的技术勘误
| Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001, Corrigenda to DIN EN ISO 14583:2002-05; German version EN ISO 14583:2001/AC:2005
|
| DIN EN ISO 14583-2002
| 平头内六角螺钉 (ISO 14583:2001); 德文版本 EN ISO 14583:2001
| Hexalobular socket pan head screws (ISO 14583:2001); German version EN ISO 14583:2001
|
| DIN EN ISO 14584-2002
| 半埋头内六角螺钉 (ISO 14584:2001); 德文版本 EN ISO 14584:2001
| Hexalobular socket raised countersunk head screws (ISO 14584:2001); German version EN ISO 14584:2001
|
| DIN EN ISO 14585 Berichtigung 1-2006
| 六角内孔平头攻丝螺钉.DIN EN ISO 14585-2002的技术勘误
| Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001, Corrigenda to DIN EN ISO 14585:2002-05; German version EN ISO 14585:2001/AC:2005
|
| DIN EN ISO 14585-2002
| 平头内六角攻丝螺钉 (ISO 14585:2001);德文版本 EN ISO 14585:2001
| Hexalobular socket pan head tapping screws (ISO 14585:2001); German version EN ISO 14585:2001
|
| DIN EN ISO 14586-2002
| 沉头内六角攻丝螺钉 (ISO 14586:2001); 德文版本 EN ISO 14586:2001
| Hexalobular socket countersunk head tapping screws (ISO 14586:2001); German version EN ISO 14586:2001
|
| DIN EN ISO 14587-2002
| 内六角半沉头(椭圆形)自攻螺钉
| Hexalobular socket raised countersunk (oval) head tapping screws (ISO 14587:2001); German version EN ISO 14587:2001
|
| DIN EN ISO 1478-1999
| 自攻螺钉螺纹
| Tapping screw thread (ISO 1478:1999); German version EN ISO 1478:1999
|
| DIN EN ISO 15065-2005
| 头部外形合乎ISO 7721标准的沉头螺钉的埋头孔
| Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005); German version EN ISO 15065:2005
|
| DIN EN ISO 15480-2000
| 六角凸缘头自钻自攻螺钉
| Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
|
| DIN EN ISO 15480-2000
| 六角凸缘头自钻自攻螺钉
| Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
|
| DIN EN ISO 15481-2000
| 十字槽盘头自钻自攻螺钉
| Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999
|
| DIN EN ISO 15481-2000
| 十字槽盘头自钻自攻螺钉
| Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999); German version EN ISO 15481:1999
|
| DIN EN ISO 15482-2000
| 十字槽沉头自钻自攻螺钉
| Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999); German version EN ISO 15482:1999
|
| DIN EN ISO 15483-2000
| 十字槽半沉头自攻螺钉
| Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999
|
| DIN EN ISO 15483-2000
| 十字槽半沉头自攻螺钉
| Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); German version EN ISO 15483:1999
|
| DIN EN ISO 1580-1994
| 开槽平头螺钉.产品等级 A (ISO 1580:1994); 德文版本 EN ISO 1580:1994
| Slotted pan head screws - Product grade A (ISO 1580:1994); German version EN ISO 1580:1994
|
| DIN EN ISO 2009-1994
| 开槽沉头螺钉(通用头).产品等级 A (ISO 2009:1994); 德文版本 EN ISO 2009:1994
| Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994); German version EN ISO 2009:1994
|
| DIN EN ISO 2010-1994
| 开槽半圆头沉头螺钉(通用头).产品等级 A (ISO 2010:1994); 德文版本 EN ISO 2010:1994
| Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994); German version EN ISO 2010:1994
|
| DIN EN ISO 2342-2004
| 有柄开槽无头螺钉
| Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003
|
| DIN EN ISO 2702-1994
| 热处理钢自攻螺钉.机械性能 (ISO 2702:1992); 德文版本 EN ISO 2702:1994
| Heat-treated steel tapping screws - Mechanical properties (ISO 2702:1992); German version EN ISO 2702:1994
|
| DIN EN ISO 3506-1-1998
| 耐蚀钢紧固件的机械性能.第1部分:螺栓,螺钉和螺柱
| Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997); German version EN ISO 3506-1:1997
|
| DIN EN ISO 3506-3-1998
| 耐蚀钢紧固件的机械特性.第3部分:不受拉应力的止动螺钉和类似的紧固件
| Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:1997); German version EN ISO 3506-3:1997
|
| DIN EN ISO 3506-4-2003
| 耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉
| Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003
|
| DIN EN ISO 4017-2001
| 六角头螺钉.产品等级A和B
| Hexagon head screws - Product grades A and B (ISO 4017:1999); German version EN ISO 4017:2000
|
| DIN EN ISO 4018-2001
| 六角头螺钉.产品等级C
| Hexagon head screws - Product grade C (ISO 4018:1999); German version EN ISO 4018:2000
|
| DIN EN ISO 4026-2004
| 内六角平端紧定螺钉
| Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003
|
| DIN EN ISO 4027 Berichtigung 1-2007
| 圆锥体内六角槽固定螺钉
| Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003, Corrigenda to DIN EN ISO 4027:2004-05
|
| DIN EN ISO 4027-2004
| 内六角锥端紧定螺钉
| Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003
|
| DIN EN ISO 4028-2004
| 内六角圆柱端紧定螺钉
| Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003
|
| DIN EN ISO 4029-2004
| 内六角凹端紧定螺钉
| Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003
|
| DIN EN ISO 4757-1994
| 螺钉十字槽 (ISO 4757:1983); 德文版本 EN ISO 4757:1994
| Cross recesses for screws (ISO 4757:1983); German version EN ISO 4757:1994
|
| DIN EN ISO 4759-1-2001
| 紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A、B和C
| Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
|
| DIN EN ISO 4759-3-2000
| 紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C
| Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
|
| DIN EN ISO 4762-2004
| 内六角圆柱头螺钉
| Hexagon socket head cap screws (ISO 4762:2004); German version EN ISO 4762:2004
|
| DIN EN ISO 6789-2003
| 螺钉和螺母用装配工具.手动转矩工具.设计一致性试验、质量一致性试验和重新校准程序的要求和试验方法
| Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003); German version EN ISO 6789:2003
|
| DIN EN ISO 7045-1994
| H型或Z型十字槽平头螺钉.产品等级 A (ISO 7045:1994); 德文版本 EN ISO 7045:1994
| Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994); German version EN ISO 7045:1994
|
| DIN EN ISO 7046-1-1994
| 带H型或Z型十字槽的沉头螺钉(通用头).产品等级 A.第1部分:4.8 特性级 (ISO 7046-1:1994); 德文版本 EN ISO
| Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Property class 4.8 (ISO 7046-1:1994); German version EN ISO 7046-1:1994
|
| DIN EN ISO 7046-2-1994
| 十字槽沉头螺钉(通用头).产品等级 A.第2部分:8.8 级特性钢,不锈钢和有色金属 (ISO 7046-2:1990); 德文版本
| Cross recessed countersunk flat head screws (common head style) - Product grade A - Part 2: Steel of property class 8.8; stainless steel and non-ferrous metals (ISO 7046-2:1990); German version EN ISO 7046-2:1994
|
| DIN EN ISO 7047-1994
| 带 H 型或 Z 型十字槽半圆头沉头螺钉(通用头).产品等级 A (ISO 7047:1994); 德文版本 EN ISO 7047:1994
| Countersunk raised head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:1994); German version EN ISO 7047:1994
|
| DIN EN ISO 7048-1998
| 带十字槽的圆头螺钉
| Cross recessed cheese head screws (ISO 7048:1998); German version EN ISO 7048:1998
|
| DIN EN ISO 7085-2000
| 表面淬火和回火的米制滚制螺纹螺钉的机械和性能要求
| Mechanical and performance requirements of case hardened and tempered metric thread rolling screws (ISO 7085:1999); German version EN ISO 7085:1999
|
| DIN EN ISO 7380-2004
| 内六角平圆头螺钉
| Heaxagon socket button head screws (ISO 7380:2004); German version EN ISO 7380:2004
|
| DIN EN ISO 7721-2-1994
| 沉头螺钉.第2部分:十字槽槽深 (ISO 7721-2:1990); 德文版本 EN ISO 7721-2:1994
| Countersunk flat head screws - Part 2: Penetration depth of cross recesses (ISO 7721-2:1990); German version EN ISO 7721-2:1994
|
| DIN EN ISO 8676-2001
| 米制细牙螺纹六角头螺钉.产品等级A和B
| Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:1999); German version EN ISO 8676:2000
|
| DIN EN ISO 887-2006
| 通用米制螺栓、螺钉和螺母用的平垫圈.一般示意图(ISO 887:2000 + Cor. 1:2006)
| Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006) English version of DIN EN ISO 887:2000 + AC:2006-07
|
| DIN EN ISO 898-1-1999
| 碳钢和合金钢制紧固件的机械性能.第1部分:螺栓,螺钉和螺柱
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999); German version EN ISO 898-1:1999
|
| DIN EN ISO 898-5 Berichtigung 1-2007
| 碳钢和合金钢制紧固件机械性能.第5部分:非拉伸应力条件下固定螺钉和类似紧固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998, Corrigenda to DIN EN ISO 898-5:1998-10
|
| DIN EN ISO 898-5-1998
| 碳钢和合金钢制紧固件的机械性能.第5部分:非拉伸应力条件下止动螺钉和类似的紧固件
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar fasteners not under tensile stress (ISO 898-5:1998); German version EN ISO 898-5:1998
|
| DIN ISO 10045-1992
| 高山雪橇.紧固安装部位.试验螺钉的要求
| Alpine skis; binding mounting area; requirements for test screws; identical with ISO 10045:1991
|
| DIN ISO 10228-1995
| 越野滑雪橇.固定松脱装置安装面.试验螺钉的要求; 等同采用 ISO 10228:1991
| Cross-country skis - Binding mounting area - Requirements for test screws; identical with ISO 10228:1991
|
| DIN ISO 1085-2007
| 螺钉和螺母用装配工具.双头扳手.尺寸组配
| Assembly tools for screws and nuts - Double-ended wrenches - Size pairing (ISO 1085:1999) English version of DIN ISO 1085:2007-04
|
| DIN ISO 1479-1990
| 六角头自攻螺钉
| Hexagon head tapping screws; identical with ISO 1479:1983
|
| DIN ISO 1481-1990
| 开槽的盘头自攻螺钉
| Slotted pan head tapping screws; identical with ISO 1481:1983
|
| DIN ISO 1482-1990
| 开槽的沉头( 扁平头)自攻螺钉（通用头型）
| Slotted countersunk (flat) head tapping screws (common head style); identical with ISO 1482:1983
|
| DIN ISO 1483-1990
| 开槽的半沉头自攻螺钉(通用头型)
| Slotted raised countersunk (oval) head tapping screws (common head style); identical with ISO 1483:1983
|
| DIN ISO 1711-1-2007
| 螺钉和螺母用装配工具.技术规范.第1部分:手动扳手和套筒(ISO 1711-1-2007)
| Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets (ISO 1711-1:2007)
|
| DIN ISO 1891-1979
| 紧固件.螺栓、螺钉、螺母和附件.术语和名称
| Fasteners; Bolts, Screws, Nuts and Accessories, Terminology and Nomenclature
|
| DIN ISO 2351-1-2007
| 螺钉和螺母用装配工具.电动螺丝起子.第1部分:一字槽螺丝用螺丝起子
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
|
| DIN ISO 2351-1-2007
| 螺钉和螺母用装配工具.电动螺丝起子.第1部分:一字槽螺丝用螺丝起子
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1: Screwdriver bits for slotted head screws (ISO 2351-1:2007) English version of DIN ISO 2351-1:2007-04
|
| DIN ISO 2351-2-2006
| 螺丝和螺母用装配工具.机器操作旋具头.第2部分:十字凹头螺钉用旋具头
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
|
| DIN ISO 2351-2-2006
| 螺丝和螺母用装配工具.机器操作旋具头.第2部分:十字凹头螺钉用旋具头
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 2: Screwdriver bits for cross-recessed head screws (ISO 2351-2:2002)
|
| DIN ISO 2351-3-2006
| 螺丝和螺母用装配工具.机器操作旋具头.第3部分:六角凹头螺钉用旋具头
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
|
| DIN ISO 2351-3-2006
| 螺丝和螺母用装配工具.机器操作旋具头.第3部分:六角凹头螺钉用旋具头
| Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3: Screwdriver bits for hexagon socket screws (ISO 2351-3:2002)
|
| DIN ISO 2380-1-2006
| 螺钉和螺母用装配工具.一字槽螺钉的旋具.第1部分:手动或者机动旋具工作部
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 1: Tips for hand- and machine-operated screwdrivers (ISO 2380-1:2004)
|
| DIN ISO 2380-2-2006
| 螺丝和螺母用装配工具.一字槽螺钉的旋具.第2部分:手动旋具的一般要求、刀刃长度和标记
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
|
| DIN ISO 2380-2-2006
| 螺丝和螺母用装配工具.一字槽螺钉的旋具.第2部分:手动旋具的一般要求、刀刃长度和标记
| Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 2380-2:2004)
|
| DIN ISO 262-1999
| ISO一般用途米制螺纹.螺钉、螺栓和螺母的选用尺寸（ISO 262-
| ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998)
|
| DIN ISO 2936-2001
| 螺钉和螺母用装配工具.内六角螺钉扳手
| Assembly tools for screws and nuts - Hexagon socket screw keys (ISO 2936:2001)
|
| DIN ISO 6004-1995
| 高山雪撬.雪撬固定松脱螺钉.要求; 等同采用 ISO 6004:1991
| Alpine skis - Ski bindings screws - Requirements; identical with ISO 6004:1991
|
| DIN ISO 6005-1995
| 高山雪撬.雪撬固定松脱螺钉.试验方法; 等同采用 ISO 6005:1991
| Alpine skis - Ski bindings screws - Test methods; identical with ISO 6005:1991
|
| DIN ISO 7026-1992
| 道路车辆.B类S规格的针式喷嘴用的20、21和27型螺丝拧入式喷嘴架
| Road vehicles; screw-in injection nozzle holders types 20, 21 and 27 for pintle nozzle size "S", type "B"; identical with ISO 7026:1990
|
| DIN ISO 7049-1990
| 十字槽盘头自攻螺钉
| Cross recessed pan head tapping screws; identical with ISO 7049:1983
|
| DIN ISO 7050-1990
| 十字槽沉头（扁平头）自攻螺钉(普通头型)
| Cross recessed countersunk (flat) head tapping screws (common head style); identical with ISO 7050:1983
|
| DIN ISO 7051-1990
| 十字槽半沉头（椭圆头）自攻螺钉
| Cross recessed raised countersunk (oval) head tapping screws; identical with ISO 7051:1983
|
| DIN ISO 7794-1992
| 越野雪橇.雪橇紧固螺钉.要求
| Cross-country skis; ski binding screws; requirements; identical with ISO 7794:1991
|
| DIN ISO 7795-1995
| 越野雪橇.雪橇紧固螺钉.试验方法; 等同采用 ISO 7795:1994
| Cross-country skis - Ski binding screws Test methods; identical with ISO 7795:1994
|
| DIN ISO 7913-1986
| 航空和航天.紧固件.螺栓和螺钉的形状和位置公差.等同采用 ISO 7913-1986
| Aerospace; fasteners, tolerances of form and position for bolts and screws; identical with ISO 7913, edition 1985
|
| DIN ISO 8764-1-2006
| 螺钉和螺母用装配工具.十字槽头螺钉用旋具.第1部分:驱动头
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 1: Driver tips (ISO 8764-1:2004)
|
| DIN ISO 8764-2-2006
| 螺丝和螺母用装配工具.十字槽头螺钉用旋具.第2部分:手动旋具的一般要求、刀刃长度和标记
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
|
| DIN ISO 8764-2-2006
| 螺丝和螺母用装配工具.十字槽头螺钉用旋具.第2部分:手动旋具的一般要求、刀刃长度和标记
| Assembly tools for screws and nuts - Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:2004)
|
| DIN ISO 885-2001
| 普通螺栓和螺钉.米制系列.端头半径
| General purpose bolts and screws - Metric series - Radii under the head (ISO 885:2000)
|
| DIN ISO 8992-2005
| 紧固件.螺栓、螺钉、螺柱和螺母的一般要求
| Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
|
| DIN ISO 9102-1992
| 道路车辆.压燃式发动机.24.25.26型螺丝拧入式喷嘴座
| Road vehicles; compression-ignition engines; screw-in injection nozzle holders, types 24, 25 and 26; Identical with ISO 9102:1990
|
| DIN V 4001-11-1992
| 计算机辅助设计标准零件库.第11部分:几何和参数规范.用工具从外部驱动的有普通安装面紧公差的平头螺钉
| CAD standard parts library; specification of geometrie and parameters; head screws, with plain sitting surface, with drive external by tool
|
| DIN V 4001-12-1988
| 计算机辅助设计标准件文档.第12部分:几何和参数规范.沉头螺钉
| CAD standard parts file; specification of geometry and parameters; countersunk head screws
|
| DIN V 4001-207-1991
| 计算机辅助设计标准件文档.第207部分:几何和参数规范.螺拴、固定螺丝和无头螺钉
| CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws
|
| DIN V 4001-207-1991
| 计算机辅助设计标准件文档.第207部分:几何和参数规范.螺拴、固定螺丝和无头螺钉
| CAD standard parts file; specification of geometry and parameters; threaded pins, set screws and headless screws
|
| 编号 | 中文名称 | 英文名称 |
|---|