| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 1042-2000 | 直平头锤和时间、十字平头锤 | Straight pein hammers, cross pein hammers |
| DIN 10970-2002 | 感官分析.时间强度试验 | Sensory analysis - Time intensity test |
| DIN 1164-11-2003 | 特种水泥.第11部分:凝固时间短的水泥的组成、规范及合格评定 | Special cement - Part 11: Composition, specification and conformity evaluation for cement with short setting time |
| DIN 12699-1975 | 实验室玻璃仪器..短排液时间等待时间15秒酶催分析用带刻度AS类吸量管 | Laboratory glassware; graduated pipettes for enzymatic analyses, short delivery time, waiting time 15 s, class AS |
| DIN 1311-3-2000 | 振荡和振动系统的机械振动.第3部分:带有限自由度不随时间变化的线性振动系统 | (Mechanical) vibration, oscillation and vibration systems - Part 3: Linear time-invariant vibration systems with a finite number of degrees of freedom |
| DIN 15578-2-1978 | 穿孔电影胶片与磁带的长度测量.第2部分:11 - 60 秒放映时间与胶片长度的换算表 | Length-measuring of perforated motion-picture films and magnetic tapes; tabels of running times 1 to 60 s in relation to film length |
| DIN 15578-3-1978 | 穿孔电影胶片与磁带的长度测量.第2部分:1 - 120 秒放映时间与胶片长度的换算表 | Length-measuring of perforated motion-picture films and magnetic tapes; tables of running times 1 to 120 min in relation to film length |
| DIN 15971-4-1977 | 胶片代码.16mm磁胶片上的时间码 | Film code; time-code on magnetic film 16 mm |
| DIN 16524-6-2000 | 印刷技术用印刷品和油墨的检验.抗各种物理影响和化学影响.第6部分:暴露于热碱溶液的饮料瓶标签抗渗透和剥落 | Testing of prints and inks for graphic technology - Resistance to various physical and chemical influences - Part 6: Behaviour of labels for beverage bottles on exposure to hot alkaline solution, resistance to penetration and come-off time |
| DIN 18230-1-1998 | 工业建筑中的结构防火.第1部分:分析要求的耐火时间 | Structural fire protection in industrial buildings - Part 1: Analytically required fire resistance time |
| DIN 18862-1-2003 | 大型厨房设备.自动烧烤机.要求和检验.第1部分:短时间烧烤用肉 | Equipment for commercial kitchens - Automatic units for grilling products; Requirements and testing - Part 1: Meal for short-time roasting |
| DIN 18862-2-2003 | 大型厨房设备.自动烧烤机.要求和检验.第2部分:长时间烧烤用肉 | Equipment for commercial kitchens - Automatic units for grilling products; Requirements and testing - Part 2: Meat for long-time roasting |
| DIN 19015-1983 | 镜头快门之间的定时.技术术语.曝光时间、同步触点和测量装置 | Timing in between-the-lens-shutters; technical terms, exposure times, synchro contacts, measuring devices |
| DIN 19016-1983 | 焦点平面快门.技术术语、曝光时间、测量装置、同步触点、测量装置 | Focal-plane shutters; technical terms, exposure times, synchro contacts, measuring devices |
| DIN 19242 Bb.1-1987 | 测量和控制.计算机处理系统的性能试验；时间测量；已发布的标准目录 | Measurement and control; performance tests on process computer systeme; time measurement; list of the published standards |
| DIN 19242-1-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.试验程序 | Measurement and control; performance tests on process computer systems; time measurement; test procedures |
| DIN 19242-10-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:终端上的对话响应 | Measurement and control; performance tests on process computer systems; time measurement; function tested: dialogue response at the terminal |
| DIN 19242-11-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:通过通讯联系使两项工作同步进行 | Measurement and control; performance tests on process computer systems; time measurement; funktion tested: message oriented synchronisation between two tasks |
| DIN 19242-12-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:从文件读出和写入文件的记录(随机存取) | Measurement and control; performance tests on process computer systems; time measurement; function tested; record-, oriented reading from and writing to a file (random access) |
| DIN 19242-13-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:采用无差错电路的数据传输 | Measurement and control; performance tests on process computer systems; time measurement; function tested: data transmission with error free transmission circuit |
| DIN 19242-14-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:可执行代码和起始程序的生成 | Measurement and control; performance tests on process computer systems; time measurement; function tested: generation of a executable code and program start |
| DIN 19242-2-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:乘法 | Measurement and control; performance tests on process computer systems; time measurement; function tested: multiplication |
| DIN 19242-3-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能：条件转移 | Measurement and control; performance tests on process computer systems; time measurement; function tested: conditional branch |
| DIN 19242-4-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能：正弦计算 | Measurement and control; performance tests on process computer systems; time measurement; function tested: sine calculation |
| DIN 19242-5-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:矩阵求逆（反演） | Measurement and control; performance tests on process computer systems; time measurement; function tested: matrix inversion |
| DIN 19242-6-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能：位组合格式的检测 | Measurement and control; performance tests on process computer systems; time measurement; function tested: detection of a bit pattern |
| DIN 19242-7-1987 | 测量和控制.程序计算机系统的性能试验.时间测量.测试功能:带程序起动的中断处理 | Measurement and control; performance tests on process computer systems; time measurement; function tested: interrupt handling with program start |
| DIN 19242-8-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:对外围存储系统( 随机存取)I/O 操作 | Measurement and control; performance tests on process computer systems; time measurement; function tested: I/O operation on a peripherical storage system (random access) |
| DIN 19242-9-1987 | 测量和控制.过程计算机系统的性能试验.时间测量.被测功能:数字输入/ 输出 | Measurement and control; performance tests on process computer systems; time measurement; function tested: digital input and output |
| DIN 19745-2006 | 土壤质量.时间域反射测量法(TDR)和时间域大气透射测量法(TDT)测定水含量的原则 | Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT) |
| DIN 22110-2-1997 | 输送带连接件试验方法.第2部分:耐用试验.织物夹层输送带连接件运行时间测定 | Testing methods for conveyor belt joints - Part 2: Endurance running tests, determination of running time of belt joints at conveyor belts with textile plies |
| DIN 40763-2-1990 | 镍镉蓄电池.带纤维结构板的电池.塑料容器电池.放电电流、最终放电电压、放电时间 | Nickel-cadmium batteries; cells with fibre structured plates; cells in plastic containers; discharge current, final discharge voltages, discharge time |
| DIN 40771-2-1981 | 镍镉蓄电池.袖珍型板电池、钢与塑料容器电池.电气特性.放电时间 | Nickel-cadmium-accumulators; cells with pocket-type plates, cells in steel and plastic containers; electrical characteristics; discharge duration |
| DIN 43751-4-1990 | 测量和控制.数字式测量仪表.测量时间基准量的仪器.定义、试验和数据单细节 | Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details |
| DIN 51562-3-1985 | 粘度测定法.用Ubberlohde粘度计测量动粘滞度.在短流动时间内相对粘滞度增量 | Viscometry; determination of kinematic viscosity using the Ubbelohde viscometer; viscosity relative increment at short flow times |
| DIN 53131-2-2005 | 纸的试验.喷墨介质.第2部分:干燥时间 | Testing of paper - Inkjet mediums - Part 2: Drytime |
| DIN 53181-1991 | 漆油漆、清漆和类似涂料的粘结剂.用毛细方法测定树脂溶化间隔时间 | Binders for paints, varnishes and similar coating materials; determination of the melting interval of resins by the capillary method |
| DIN 53465-1963 | 塑料检验.热固性模压塑料闭合时间的测定 | Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials |
| DIN 53758-1975 | 塑料制品的试验.短时间试验内部压力对空心物体作用的测定 | Testing of plastics articles; determination of the effect of internal pressure on hollow objects by short-time test |
| DIN 53759-1975 | 塑料制品的试验.长时间试验内部压力对空心物体作用的测定 | Testing of plastics articles; determination of the effect of internal pressure on hollow objects by long-time test |
| DIN 53769-3-1988 | 玻璃纤维增强塑料管试验.管子短时间和长时间最大压力试验 | Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness |
| DIN 54334-1975 | 纺织品的检验.燃烧性能的测定.边部点火最低点燃时间 | Testing of textiles; determination of the burning behaviour; minimum ignition time, edge ignition |
| DIN 5483-1-1983 | 随时间变化的量.时间相关的术语 | Time-dependent quantities; terms for the time-dependency |
| DIN 5483-2-1982 | 与时间有关的量.字母符号 | Time-dependent quantities; letter symbols |
| DIN 58902-2000 | 止血学.测定凝血时间的参考测量程序 | Haemostaseology - Reference measurement procedure for the determination of batroxobin time |
| DIN 58908-2000 | 止血学.激活部分促T凝血酶原激酶时间的测定(APTT).参考测量方法 | Haemostaseology - Determination of activated partial thromboplastin time (APTT) - Reference measurement procedure |
| DIN 58910-1-2000 | 止血学.促凝血酶原激酶时间的测定.第1部分:测定含枸橼酸盐的静脉血中血浆的参考测量方法 | Haemostaseology - Determination of thromboplastin (prothrombin) time - Part 1: Reference measurement procedure for the determination in plasma from citrated venous blood |
| DIN 58910-2-2000 | 止血学.促凝血酶原激酶时间的测定.第2部分:测定含枸橼酸盐的静脉血的参考测量方法 | Haemostaseology - Determination of thromboplastin (prothrombin) time - Part 2: Reference measurement procedure for the determination in citrated venous blood |
| DIN 58910-3-2000 | 止血学.促凝血酶原激酶时间的测定.第3部分:含枸橼酸盐的毛细血液测定的参考测量方法 | Haemostaseology - Determination of the thromboplastin (prothrombin) time - Part 3: Reference measurement procedure for the determination in citrated capillary blood |
| DIN 58910-4-2000 | 止血学.促凝血酶原激酶时间的测定.第4部分:测定毛细血液的参考测量方法 | Haemostaseology - Determination of thromboplastin (prothrombin) time - Part 4: Reference measurement procedure for the determination in capillary blood |
| DIN 58911-1-2000 | 止血学.测量方法的校准.凝固时间测量法 | Haemostaseology - Calibration of measurement procedures - Part 1: Clotting time measurement procedures |
| DIN 58914-1-2000 | 止血学.凝血致活酶时间的测定.第1部分:测定含枸橼酸盐的静脉血中血浆的参考测量方法 | Haemostaseology - Determination of thrombin time - Part 1: Reference measurement procedure for the determination in plasma from citrated venous blood |
| DIN 58959-9 Bb.2-1997 | 医疗微生物学质量管理.第9部分:培养基检验用对照菌株要求.随时可用的培养基最长保存时间 | Quality management in medical microbiology - Part 9: Requirements for the use of control strains for testing culture media; maximum storage times for ready to use culture media |
| DIN 66224-2-1982 | 检测仪表用磁带.10位或12位数据字的脉码调制法的录制.第2部分:时间代码辅助二进制字符的应用 | Instrumentation magnetic tape; PCM recording with 10- or 12-bit data word; application of auxiliary binary characters for time code |
| DIN 8314-3-1989 | 停车时间控制器.第3部分:标记 | Parking control equipment; letterings |
| DIN 8743-2004 | 包装机械和包装线.时间术语、参数和计算基础 | Packaging machines and packaging lines - Terms of time, parameters and basics of calculation |
| DIN CEN/TS 14751-2005 | 焊接.焊接检验用飞行时间衍射技术的使用 | Welding - Use of time-of-flight diffraction technique (TOFD) for examination of welds; German version CEN/TS 14751:2004 |
| DIN EN 1015-9-2007 | 圬工用灰浆的试验方法.第9部分:新凝砂桨可工作寿命和恢复时间的测定(包括修改件A1:2006) | Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar （includes Amendment A1:2066) English version of DIN EN 1015-9:2007-05 |
| DIN EN 12189-1999 | 混凝土支承结构防护和维修用产品和系统.试验方法.敞开时间测定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time; German version EN 12189:1999 |
| DIN EN 12381-2006 | 健康信息学.保健特殊问题的时间标准 | Health informatics - Time standards for healthcare specific problems; English version EN 12381:2005 |
| DIN EN 12846-2002 | 沥青和含沥青粘合剂.采用流出粘度计对沥青乳液流出时间的测定; 德文版本 EN 12846:2002 | Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer; German version EN 12846:2002 |
| DIN EN 13294-2002 | 混凝土构件的保护和检修用产品和系统.试验方法.固化时间的测定; 德文版本 EN 13294:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time; German version EN 13294:2002 |
| DIN EN 13319-2000 | 潜水设备附件.深度规和深度及时间组合测量设备.功能和安全要求、试验方法 | Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods; German version EN 13319:2000 |
| DIN EN 13357-2003 | 沥青和沥青粘合剂.石油轻制和软制沥青流出时间测定 | Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens; German version EN 13357:2002 |
| DIN EN 13409-2002 | 液压固化地板平整复合物的试验方法.固化时间测定; 德文版本 EN 13409:2002 | Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time; German version EN 13409:2002 |
| DIN EN 1346-2007 | 瓷砖用粘合剂.敞露时间的测定 | Adhesives for tiles - Determination of open time; English version of DIN EN 1346:2007-11 |
| DIN EN 13630-12-2002 | 民用爆炸物.引爆线和安全引信.第12部分:安全引信燃烧持续时间的测定; 德文版本 EN 13630-12:2002 | Explosives for civil uses - Detonation cords and safety fuses - Part 12: Determination of burning duration of safety fuses; German version EN 13630-12:2002 |
| DIN EN 13850-2007 | 邮政服务.服务质量.单件有优先权邮件和一级邮件点到点服务运送时间的测量(包括修改件A1:2007) | Postal service - Quality of service - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail (includes Amendment A1:2007); English version of DIN EN 13850:2007-06 |
| DIN EN 13938-3-2003 | 民用炸药.推进剂和火箭推进剂.第3部分:从点火到爆炸过渡时间的测定 | Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration to detonation transition; German version EN 13938-3:2003 |
| DIN EN 14117-2004 | 混凝土结构的保护和维修用产品和系统.试验方法.粘性注入产品的流出时间测定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products; German version EN 14117:2004 |
| DIN EN 14187-2-2003 | 冷用密封胶.第2部分:不粘时间测定的试验方法 | Cold applied joint sealants - Part 2: Test method for the determination of tack free time; German version EN 14187-2:2003 |
| DIN EN 14508-2007 | 邮政服务.服务质量.单件无优先权邮件与二等邮件的点对点运送时间的测量 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail（includes Amendment A1-2007）; English version of DIN EN 14508:2007-06 |
| DIN EN 14534-2007 | 邮政服务.服务质量.批量邮件点对点服务运送时间的测量(包括修改件A1:2007) | Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail(includes Amendment A1:2007); English version of DIN EN 14534:2007-06 |
| DIN EN 14701-1-2006 | 污泥特性.过滤特征.第1部分:毛细管吸升时间(CST) | Characterisation of sludges - Filtration properties - Part 1: Capillary suction time (CST) English version of DIN EN 14701-1:2006-06 |
| DIN EN 15336-2007 | 粘合剂.静负荷下胶粘件断裂时间的测定 | Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified); English version of DIN EN 15336:2007-05 |
| DIN EN 15416-4-2006 | 苯酚和氨基塑料除外的负荷轴承木结构的粘结剂.试验法.第4部分:一种聚亚安酯粘结剂成分的开放陈化时间测定 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives; English version EN 15416-4:2006-10 |
| DIN EN 15416-5-2006 | 苯酚和氨基塑料除外的负荷轴承木结构的粘结剂.试验法.第5部分:常规加压时间测定 | Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time; English version of DIN EN 15416-5:2006-10 |
| DIN EN 1744-6-2006 | 集料化学性能的试验 第6部分:再生集料萃取对水泥最初凝固时间影响的测定 | Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement; English version of DIN EN 1744-6:2006-12 |
| DIN EN 1811-2008 | 与皮肤直接或长时间接触的产品中镍元素释放用参考试验方法.德文版本EN 1811-1998+A1-2008 | Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin; German version EN 1811:1998+A1:2008 |
| DIN EN 196-3-2009 | 水泥的测试方法.第3部分:凝固时间和坚固性的测定 | Methods of testing cement - Part 3: Determination of setting times and soundness(includes Amendment A1:2008); English version of DIN EN 196-3:2009-02 |
| DIN EN 2349-304-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第304部分:动作和释放时间 | Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time; German and English version EN 2349-304:2006 |
| DIN EN 2349-305-2007 | 航空航天系列.继电器和电流接触器的要求和试验程序.第305部分:释放时间 | Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time; German and English version EN 2349-305:2006 |
| DIN EN 2997-007-2008 | 航空航天系列.持续工作时间为-65℃～175℃、200℃、最高260℃的耐火或非耐火螺纹环连接的圆形电连接器.第00 | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 007: Hermetic receptacle with round flange attached by welding or brazing - Product standard; German and English version EN 2997-007:2006 |
| DIN EN 302-6-2004 | 承重木结构件用胶粘剂.试验方法.第6部分:常规加压时间的测定 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time; German version EN 302-6:2004 |
| DIN EN 480-2-2006 | 混凝土、灰浆和压紧灰浆混合剂.试验方法.第2部分:凝固时间测定 | Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time; English version of DIN EN 480-2:2006-11 |
| DIN EN 583-6-2009 | 无损检验 超声波检验 第6部分:不连续性的探测和定尺寸用飞行时间衍射技术方法 | Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities; English version of DIN EN 583-6:2009-03 |
| DIN EN 60068-2-57-2000 | 环境试验.第2部分:试验,试验Ff:振动.时间历程法 | Environmental testing - Part 2: Tests; test Ff: Vibration, time-history method (IEC 60068-2-57:1999); German version EN 60068-2-57:2000 |
| DIN EN 60216-6-2007 | 电绝缘材料.耐热特性.第6部分:用固定时间框架法测定绝缘材料的耐热指数(TI和RTE)(IEC 60216-6:2006) | Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method (IEC 60216-6:2006); German version EN 60216-6:2006 |
| DIN EN 60255-3-1998 | 继电器.第3部分:带独立时间或非独立时间特性的单输入激励量测量继电器 | Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time (IEC 60255-3:1989, modified); German version EN 60255-3:1998 |
| DIN EN 60461-2001 | 磁带录像机的时间和控制代码 | Time and control code for video tape recorders (IEC 60461:2001); German version EN 60461:2001 |
| DIN EN 60512-25-3-2002 | 电子设备用连接器.试验和测量.第25-3部分:试验25c:上升时间老化 | Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c: Rise time degradation (IEC 60512-25-3:2001); German version EN 60512-25-3:2001 |
| DIN EN 60974-6-2003 | 电弧焊设备.第6部分:有限工作时间手动金属弧焊电源 | Arc welding equipment - Part 6: Limited duty manual metal arc welding power sources (IEC 60974-6:2003); German version EN 60974-6:2003 |
| DIN EN 61280-2-10-2006 | 纤维光学通信子系统试验程序.第2-10部分:数字系统.激光发射机的时间分辨线性调频脉冲和α因数测量(IEC 6128 | Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters (IEC 61280-2-10:2005); German version EN 61280-2-10:2005 |
| DIN EN 61300-3-21-1998 | 光纤互联装置和无源元件.基本试验和测量方法.第3-21部分:检验和测量.转换时间和跳动持续时间 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements; Switching time and bounce time (IEC 61300-3-21:1998); German version EN 61300-3-21:1998 |
| DIN EN 61811-1-1999 | 经质量评定的机电非特定时间的"有"或"无"继电器.第1部分:通用规范 | Electromechanical non-specified time all-or-nothing relays of assessed quality - Part 1: Generic specification (IEC 61811-1:1999); German version EN 61811-1:1999 |
| DIN EN 62374-2008 | 半导体器件.与时间有关的栅极介电薄膜的介质击穿(TDDB)试验 | Semiconductor devices - Time Dependent Dielectric Breakdown (TDDB) test for gate dielectric films (IEC 62374:2007); German version EN 62374:2007 |
| DIN EN 728-1997 | 塑料管和管道系统.聚烯烃管和接头.氧化感应时间测定 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; German version EN 728:1997 |
| DIN EN ISO 11554-2008 | 光学和光子学.激光器和激光器相关设备.激光束功率、能量和时间特征的试验方法 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2006);English version of DIN EN ISO 11554:2008-11 |
| DIN EN ISO 12625-8-2006 | 薄纸和薄纸制品.第8部分:对篮子沉浸吸水时间和吸水能力的试验办法(ISO 12625-8:2006) | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2006); German version EN ISO 12625-8:2006 |
| DIN EN ISO 14935-1998 | 石油及其相关产品.耐火流体的吸油绳火焰持续时间的测定 | Petroleum and related products - Determination of wickflame persistence of fire-resistant fluids (ISO 14935:1998); German version EN ISO 14935:1998 |
| DIN EN ISO 2431-1996 | 色漆和清漆.用流量杯测定流动时间 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:1993, including Technical Corrigendum 1:1994); German version EN ISO 2431:1996 |
| DIN EN ISO 2535-2003 | 塑料.不饱和聚酯树脂.室温胶凝时间测量 | Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001); German version EN ISO 2535:2002 |
| DIN EN ISO 2578-1998 | 塑料.长期热作用下温度 - 时间极限值的测定 | Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998 |
| DIN EN ISO 3382-2-2008 | 声学.房间声学参数的测量.第2部分:普通房间的混响时间 | Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms (ISO 3382-2:2008); German version EN ISO 3382-2:2008 |
| DIN EN ISO 9073-13-2007 | 纺织品.非织造织物的试验方法.第13部分:重复的液体渗透时间 | Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006)English version of DIN EN ISO 9073-13:2007-05 |
| DIN EN ISO 9073-8-1998 | 纺织品.非织造布的试验方法.第8部分:液体渗透时间的测定(模拟尿) | Textiles - Test methods for non-wovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995); German version EN ISO 9073-8:1998 |
| DIN EN ISO 9396-2001 | 塑料.酚醛树脂.用自动装置在规定条件下对酚醛树脂胶凝时间的测定 | Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus (ISO 9396:1997); German version EN ISO 9396:2000 |
| DIN IEC 60094-10-1989 | 磁带录音和放音系统.第10部分:时间码和地址码 | Magnetic tape sound recording and reproducing systems; time and address codes; identical with IEC 60094-10:1988 |
| DIN ISO 11222-2002 | 空气质量.空气质量测量时间平均值不确定度测定 | Air quality - Determination of the uncertainty of the time average of air quality measurements (ISO 11222:2002) |
| DIN ISO 12238-2005 | 液压传动.方向控制阀门.移动时间测量(ISO 12238-2001) | Pneumatic fluid power - Directional control valves - Measurement of shifting time (ISO 12238:2001);English version of DIN ISO 12238:2005 |
| DIN ISO 16000-8-2008 | 室内空气.第8部分:建筑物特性通风条件下局部空气存留时间的测定 | Indoor air - Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions (ISO 16000-8:2007) |
| DIN ISO 8130-6-2005 | 粉末涂料.第6部分:在给定温度下热固性粉末涂料胶凝时间的测定 | Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:1992, including Amendment 1:1998) |
| DIN ISO 8601-2006 | 数据元和交换格式.信息交换.日期和时间的表示法 | Data elements and interchange formats - Information interchange - Representation of dates and times (ISO 8601:2004) English version of DIN ISO 8601:2006-09 |
| DIN V ENV 302-5-2002 | 承载木结构粘胶剂.试验方法.第5部分:正常组装时间测定 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of the conventional assembly time; German version ENV 302-5:2002 |
| DIN VDE 0119-207-13-2005 | 铁路车辆状况.控制和测量仪表技术.第207-13部分:EBuLa用车载装置(电子工作时间表和速度限制) | State of the railway vehicles - Control and instrumentation technology - Part 207-13: On-board devices for EBuLa (electronic working timetable and speed restrictions) |
| 编号 | 中文名称 | 英文名称 |