| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| EN 1015-9-1999 | 圬工用灰浆试验方法 第9部分：新鲜灰浆使用寿命和调整时间的测定 | Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar |
| EN 116000-2-1992 | 通用规范：机电有或无继电器 第2部分：时间延迟继电器通用数据和试验方法 | Generic specification- Electromechanical all-or-nothing relays- part 2: Generic data and methods of test for time delay relays |
| EN 12189-1999 | 混凝土结构保护和修缮用产品及系统 试验方法 间隔时间的测定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time |
| EN 12846-2002 | 沥青和沥青粘合剂 用射流粘度计测定沥青乳液流动时间 | Bitumen and bituminous binders - Determination of efflux time of bitumen emulsions by the efflux viscometer |
| EN 1296-2000 | 屋顶材料的防水挠性薄板、 沥青、塑料和橡胶薄板 长时间暴露在高湿环境下的天然老化方法 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature |
| EN 13075-2-2002 | 石油制品 沥青和沥青粘合剂 断裂性能测定 第2部分：阳离子沥青乳液细粒混合时间的测定 | Bitumen and bituminous binders - Determination of breaking behaviour - Part 2: Determination of fines mixing time of cationic bitumen emulsions |
| EN 13294-2002 | 用于保护和修整混凝土结构的产品和系统 试验方法 硬化时间的测定 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
| EN 13319-2000 | 潜水附件 深度计和深度、时间组合测量设备 功能和安全要求、试验方法 | Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods |
| EN 13357-2002 | 沥青和沥青粘合剂 溶于汽油和软制沥青制品流动时间的测定 | Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens |
| EN 13400-2001 | 鞋类 取样地点、样品和试件制备和修整持续时间 | Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces |
| EN 13409-2002 | 水压调整地面平滑和/或调平用复合物的试验法 调整时间测定 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time |
| EN 1346-1996+A1-1998 | 瓷砖粘合剂 晾开时间的测定 | Adhesives for tiles - Determination of open time |
| EN 13630-12-2002 | 民用炸药 导爆索和安全引信 第12部分：安全引信燃烧持续时间的测定 | Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses |
| EN 13850-2002 | 邮政服务 服务质量 单件优先邮件和一级邮件的点到点传递时间测量 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail |
| EN 14187-2-2003 | 低温用接缝密封剂 第2部分：消耗时间测定的试验方法 | Cold applied joint sealants - Part 2: Test method for the determination of tack free time |
| EN 14508-2003 | 邮政服务 服务质量 单件非优先级邮件和二级邮件点到点运输时间的测定 | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| EN 1811-1998 | 直接和长时间接触皮肤的产品中镍释放量的基准试验方法 | Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin |
| EN 196-3-1994+AC-1995 | 测试水泥的方法 第3部分：放置时间和固结性的测定 | Methods of testing cement - Part 3: Determination of setting time amd soundness |
| EN 1989-2000 | 热塑性管道系统 埋地无压污水用接头 通过估计密封压力对热塑弹性塑料(TPE)密封接头的长时间密封性能的试 | Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
| EN 28601-1992 | 数据元和交换格式 信息交换 时间和日期的表示 | Data elements and interchange formats - Information interchange; representation of dates and times (ISO 8601:1988 and technical corrigendum 1:1991) |
| EN 29117-1992 | 色漆和清漆 贯穿干燥状态和贯穿干燥时间 试验方法 | Paints and varnishes - Determination of through-dry state and through-dry time - Method of test (ISO 9117:1990) |
| EN 3-1-1996 | 便携式灭火器 第1部分：A类和B类灭火试验的描述和操作时间 | Portable fire extinguishers - Part 1: Description, duration of operation, class A and B fire test |
| EN 4185-2001 | 航空航天系列 钛合金管连接8°30′ 长时间运行舱壁三通 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Tees bulkhead on run long |
| EN 480-2-1996 | 混凝土、灰泥和水泥浆的混合物 试验方法 第2部分：凝固时间的测定 | Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time |
| EN 60068-2-57-2000 | 环境试验 第2-57部分：试验 试验Ff：振动 时间历程法 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration, time-history method (IEC 60068-2-57:1999) |
| EN 60461-2001 | 磁带录像机的时间码和控制码 | Time and control code for video tape recorders (IEC 60461:2001) |
| EN 60512-25-3-2001 | 电子设备用连接器 试验和测量 第25-3部分:试验25c 上升时间特性变坏 | Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c: Rise time degradation (IEC 60512-25-3:2001) |
| EN 60669-2-3-1997 | 家用和类似用途的固定电器设备开关 第２－３部分：特殊要求 时间延迟开关 | Switches for household and similar fixed-electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS) (IEC 60669-2-3:1997) |
| EN 61300-3-21-1998 | 光纤互连器件和无源元件 基本试验和测量程序 第3-21部分：检查和测量 切换时间和回跳时间 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time and bounce time (IEC 61300-3-21:1998) |
| EN 728-1997 | 塑料管道和导管系统 聚烯烃管和配件 氧化感应时间的测定 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time |
| EN ISO 11554-2003 | 光学和光学仪器 激光和激光设备 激光束功率、能量和时间特征的试验方法 | Optics and optical instruments - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2003) |
| EN ISO 2431-1996+AC-1999 | 色漆和清漆 用流量杯测定流出时间 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:1993, including Technical Corrigendum 1:1994) |
| EN ISO 2535-2002 | 塑料 不饱和聚脂树脂 25℃时胶凝时间的测量 | Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature (ISO 2535:2001) |
| EN ISO 2578-1998 | 塑料 长期热暴露作用后时间和温度极限的测定 | Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993) |
| EN ISO 3382-2000 | 声学 根据其他声学参数测量房间混向时间 | Acoustics - Measurement of the reverberation time of rooms with reference to other acoustical parameters (ISO 3382:1997) |
| EN ISO 4490-2001 | 金属粉末 用校准漏斗(霍尔流量计)测定流动时间 | Metallic powders - Determination of flow time by means of a calibrated funnel (Hall flowmeter) (ISO 4490:2001) |
| EN ISO 9073-8-1998 | 纺织品 非织造布试验方法 第8部分：液体渗透时间的测定(模拟尿) | Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) (ISO 9073-8:1995) |
| EN ISO 9396-2000 | 塑料 酚醛树脂 用自动装置在给定温度下对凝胶时间的测定 | Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997) |
| ENV 1156-1998 | 木基板 加载时间和蠕变因素的测定 | Wood-based panels - Determination of duration of load and creep factors |
| ENV 12381-1996 | 保健信息学 特殊保健问题的时间标准 | Health care informatics - Time standards for healthcare specific problems |
| ENV 12625-8-2001 | 薄纸和薄纸产品 第８部分：吸水时间、吸水率 人工和自动试验方法 | Tissue paper and tissue products - Part 8: Water absorption time, water absorption capacity; Manual and automated test method |
| ENV 302-5-2001 | 承重木结构用胶粘剂 试验方法 第5部分：常规装配时间的测定 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of the conventional assembly time |
| ENV 302-5-2003 | 承重木结构用胶粘剂 试验方法 第5部分：常规装配时间的测定 | Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of the conventional assembly time |
| ENV 583-6-2000 | 无损检测 超声波检验 第6部分：作为间隔性波分级和探测方法的飞行时间衍射技术 | Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities |
| HD 311.10 S1-1989 | 磁带录音和重放系统 第10部分：时间码和地址码 | Magnetic tape sound recording and reproducing systems-Part 10: Time and address codes |
| prEN 2349-304-2000 | 航空航天系列 继电器和接触器要求和试验程序 第304部分：工作时间和释放时间 | Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time |
| prEN 2349-305-2000 | 航空航天系列 继电器和接触器要求和试验程序 第305部分：反弹时间 | Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time |
| prEN 302-6-2001 | 承重木结构用胶粘剂 试验方法 第6部分：常规压干时间的测定 | Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the conventional pressing time |
| prEN 3095-1998 | 航空航天系列 密封剂 测试方法 延长装配时间的确定 | Aerospace series - Sealants - Test method - Determination of extended assembly time |
| prEN ISO 8601-2002 | 数据元和交换格式 信息交换 时间和日期的表示 | Data elements and interchange formats - Information interchange - Representation of dates and times (ISO 8601:2000) |
| 编号 | 中文名称 | 英文名称 |