| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| IEC 60050-445-2002 | 国际电工词汇.第445部分:特定时间的有或无继电器 | International Electrotechnical Vocabulary - Part 445: Specified time all-or-nothing relays |
| IEC 60068-2-57-1999 | 环境试验 第2-57部分:试验 试验Ff:振动 时间历程法 | Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history method |
| IEC 60094-10-1988 | 磁带录音和重放系统 第10部分:时间码和地址码 | Magnetic tape sound recording and reproducing systems. Part 10: Time and address codes |
| IEC 60151-8 Corrigendum 1-1967 | 电子管电性能的测量.第8部分:阴极加热时间和热丝加热时间的测量 | Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time; Corrigendum 1 |
| IEC 60151-8-1966 | 电子管电性能的测量 第8部分:阴极加热时间和热丝加热时间的测量 | Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time |
| IEC 60216-6-2006 | 电气绝缘材料.耐热性能.第6部分:使用固定时间框架法测定绝缘材料的耐热指数(TI和RTE) | Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method |
| IEC 60461-2001 | 磁带录象机的时间码和控制码 | Time and control code for video tape recorders |
| IEC 60512-25-3-2001 | 电子设备用连接器 试验和测量 第25-3部分：试验25c 上升时间特性变坏 | Connectors for electronic equipment - Tests and measurements - Part 25-3: Test 25c; Rise time degradation |
| IEC 61224-1993 | 核反应堆 电阻温度探测器(RTD)的响应时间 现场测量 | Nuclear reactors; response time in resistance temperature detectors (RTD); in situ measurements |
| IEC 61280-2-10-2005 | 纤维光学通信子系统试验程序.第2-10部分:数字系统.激光发射器的时间分辨线性调频脉冲和α指数测量 | Fibre optic communication subsystem test procedures - Part 2-10: Digital systems - Time-resolved chirp and alpha-factor measurement of laser transmitters |
| IEC 61300-3-21-1998 | 纤维光学互连器件和无源元件 基本试验和测量程序 第3-21部分:检查和测量 切换时间和回跳时间 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements; switching time and bounce time |
| IEC 62054-21-2004 | 交流测量 费率和负荷控制 第21部分:时间开关的特殊要求 | Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches |
| IEC 62343-5-1-2009 | IEC 62343-5-1,第1版:动态模块.测试方法.第5-1部分:动态增益倾斜均衡器.响应时间测量 | IEC 62343-5-1, Ed. 1: Dynamic modules - Test methods - Part 5-1: Dynamic gain tilt equalizer - Response time measurement |
| IEC 62374-2007 | 半导体器件.栅极介电薄膜用时间相关的电介质击穿(TDDB)试验 | Semiconductor devices - Time dependent dielectric breakdown (TDDB) test for gate dielectric films |
| IEC/TR 61282-8-2006 | 纤维光学通信系统设计指南.第8部分:根据测出的时间变化啁啾数据计算色散罚值 | Fibre optic communication system design guides - Part 8: Calculating dispersion penalty from measured time-resolved chirp data |
| IEC/TS 61934-2006 | 电绝缘材料和系统.在短上升时间和反复电压脉冲下局部放电(PD)的电测量 | Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses |
| IEC/TS 62393-2005 | 便携式和手持式多媒体设备.移动计算机.蓄电池运行时间的测量 | Portable and hand-held multimedia equipment - Mobile computers - Battery run-time measurement |
| ISO 10047-1993 | 纺织品 织物表面燃烧时间的测定 | Textiles; determination of surface burning time of fabrics |
| ISO 10146-1997 | 交联聚乙烯(PE-X)管材 时间和温度对预期强度的影响 | Crosslinked polyethylene(PE-X)pipes - Effect of time and temperature on the expected strength |
| ISO 10791-9-2001 | 加工中心检验条件 第9部分：刀具交换和托板交换操作时间的评价 | Test conditons for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change |
| ISO 11104-2003 | 空间数据和信息传输系统.时间码格式 | Space data and information transfer systems - Time code formats |
| ISO 11222-2002 | 空气质量.空气质量测量的时间平均值不确定性的测定 | Air quality - Determination of the uncertainty of the time average of air quality measurements |
| ISO 11357-5-1999 | 塑料 差示扫描量热法(DSC) 第5部分:特性反应的测定 反应曲线温度、时间、焓和转化度 | Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion |
| ISO 11357-6-2008 | 塑料.差示扫描量热法(DSC).第6部分:氧化诱导时间(等温OIT)和氧化诱导温度(动态OIT)的测定 | Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
| ISO 11554-2006 | 光学和光子学.激光和激光设备.激光束功率、能量和时间特征的试验方法 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics |
| ISO 11898-4-2004 | 道路车辆.控制器局域网络.第4部分:时间触发通信 | Road vehicles - Controller area network (CAN) - Part 4: Time-triggered communication |
| ISO 12230-1996 | 聚丁烯(PB)管材 时间和温度对预期强度的影响 | Polybutene (PB) pipes - Effect of time and temperature on the expected strength |
| ISO 12238-2001 | 气动方向控制阀 切换时间的测量 | Pneumatic fluid power - Directional control valves - Measurement of shifting time |
| ISO 12625-8-2006 | 薄纸和薄纸制品.第8部分:篮式沉浸试验法测定吸水时间和吸水能力 | Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method |
| ISO 13202-2003 | 起重机.速度和时间参数的测量 | Cranes - Measurement of velocity and time parameters |
| ISO 13555-3-2004 | 柴油发动机.柴油喷射装置动态计时的检验规程.第3部分:时间测量设备的检测 | Diesel engines - Procedure for checking the dynamic timing of diesel fuel injection equipment - Part 3: Validation of timing measurement devices |
| ISO 13571-2007 | 火灾威胁生命的部位.利用火灾数据逃生有效时间的评定指南 | Life-threatening components of fire - Guidelines for the estimation of time available for escape using fire data |
| ISO 1388-12-1981 | 工业用乙醇 试验方法 第12部分:高锰酸盐时间的测定 | Ethanol for industrial use; Methods of test; Part 12 : Determination of permanganate time |
| ISO 14864-1998 | 大米 蒸煮过程中谷粒糊化时间的评价 | Rice - Evaluation of gelatinization time of kernels during cooking |
| ISO 15040-1999 | 复合材料 预浸料 胶凝时间的测定 | Composites - Prepregs - Determination of gel time |
| ISO 15109-1998 | 粘合剂 静负荷状态下胶粘件断裂时间的测定 | Adhesives - Determination of the time to rupture of bonded joints under static load |
| ISO 15531-42-2005 | 工业自动化系统和集成.工业生产管理数据.第42部分:时间模式 | Industrial automation systems and integration - Industrial manufacturing management data - Part 42: Time Model |
| ISO 16000-8-2007 | 室内空气.第8部分:建筑物特种通风条件下局部空气存留时间的测定 | Indoor air - Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions |
| ISO 17514-2004 | 时间计量仪表.荧光覆层.试验方法和要求 | Time-measuring instruments - Photoluminescent deposits - Test methods and requirements |
| ISO 17709-2004 | 鞋类.样品和试件的调节时间、取样位置和制备 | Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces |
| ISO 18629-13-2006 | 工业自动化系统和集成.工艺规范语言.第13部分:持续时间和排序理论 | Industrial automation systems and integration - Process specification language - Part 13: Duration and ordering theories |
| ISO 24033-2009 | 耐升温的聚乙烯管道(PE-RT).时间和温度对预期强度的影响 | Polyethylene of raised temperature resistance (PE-RT) pipes - Effect of time and temperature on the expected strength |
| ISO 2431 Technical Corrigendum 1-1994 | 色漆和清漆 用流量杯测定流出时间 技术勘误1 | Paints and varnishes - Determination of flow time by use of flow cups; Technical Corrigendum 1 |
| ISO 2431 Technical Corrigendum 2-1999 | 色漆和清漆 用流量杯测定流出时间 技术勘误2 | Paints and varnishes - Determination of flow time by use of flow cups; Technical Corrigendum 2 |
| ISO 2431-1993 | 色漆和清漆 用流量杯测定流出时间 | Paints and varnishes; determination of flow time by use of flow cups |
| ISO 2535-2001 | 塑料 不饱和聚酯树脂室温时胶凝时间的测量 | Plastics - Unsaturated-polyester resins - Measurement of gel time at ambient temperature |
| ISO 2558-1974 | 增强塑料用玻璃纤维短切原丝毡 粘合剂在苯乙烯中溶解时间的测定 | Textile glass chopped-strand mats for reinforcement of plastics; Determination of time of dissolution of the binder in styrene |
| ISO 2578-1993 | 塑料 长期热暴露作用后时间和温度极限的测定 | Plastics; determination of time-temperature limits after prolonged exposure to heat |
| ISO 294-1 AMD 2-2005 | 塑料.热塑性材料试样的注模塑法.第1部分:一般原则、多用途模塑件及条形试样.修改件2:吸着压力和时间的测定 | Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens; Amendment 2: Methods of determining the hold pressure and hold time |
| ISO 2975-6-1977 | 封闭管道中水流量的测量 示踪法 第6部分:用非放射性示踪剂的传输时间法 | Measurement of water flow in closed conduits; Tracer methods; Part VI : Transit time method using non-radioactive tracers |
| ISO 2975-7-1977 | 封闭管道中水流量的测量 示踪法 第7部分:用放射性示踪剂的传输时间法 | Measurement of water flow in closed conduits; Tracer methods; Part VII : Transit time method using radioactive tracers |
| ISO 3157-1991 | 时间测量仪器的辐射发光 规定 | Radioluminescence for time measurement instruments; specifications |
| ISO 3382-2 Technical Corrigendum 1-2009 | 声学.房间声学参数的测量.第2部分:普通房间的混响时间.技术勘误1 | Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms; Technical Corrigendum 1 |
| ISO 3382-2-2008 | 声学.房间声学参数的测量.第2部分:普通房间的混响时间 | Acoustics - Measurement of room acoustic parameters - Part 2: Reverberation time in ordinary rooms |
| ISO 3415-1986 | 铺地织物 短时间施加中等静负荷后厚度减薄的测定 | Textile floor coverings; Determination of thickness loss after brief, moderate static loading |
| ISO 3416-1986 | 铺地织物 经长时间施加重型静负荷后厚度减薄的测定 | Textile floor coverings; Determination of thickness loss after prolonged, heavy static loading |
| ISO 4168-2002 | 时间测量仪表.辐射发光镀层检验的条件 | Timekeeping instruments - Conditions for carrying out checks on radioluminescent deposits |
| ISO 516-1999 | 摄影 照相机快门 爆光时间 | Photography - Camera shutters - Timing |
| ISO 7509-2000 | 塑料管道系统 玻璃纤维增强热固性塑料(GRP)管材 持续内压力下破坏时间的测定 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure |
| ISO 80000-3-2006 | 量和单位.第3部分:空间和时间 | Quantities and units - Part 3: Space and time |
| ISO 8130-6 AMD 1-1998 | 粉末涂料 第6部分:在给定温度下热固性粉末涂料胶凝时间测定 修改1 | Coating powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature; Amendment 1 |
| ISO 8130-6-1992 | 粉末涂料 第6部分:在给定温度下热固性粉末涂料胶凝时间测定 | Coating powders; part 6: determination of gel time of thermosetting coating powders at a given temperature |
| ISO 8601-2004 | 数据元和交换格式.信息交换.日期和时间的表示 | Data elements and interchange formats - Information interchange - Representation of dates and times |
| ISO 9073-13-2006 | 纺织品.非织造布试验方法.第13部分:重复液体渗透时间 | Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time |
| ISO 9073-8-1995 | 纺织品 非织造布试验方法 第8部分:液体渗透时间的测定(模拟尿) | Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine) |
| ISO 9396-1997 | 塑料 酚醛树脂 使用自动装置对规定条件下酚醛树脂凝胶时间的测定 | Plastics - Phenolic resins - Determination of the gel time of resols under specific conditions using automatic apparatus |
| ISO 9597-2008 | 水泥.凝结时间和安定性的测定 | Cement - Test methods - Determination of setting time and soundness |
| ISO 9642-1993 | 电影 用于24格/秒、25格/秒及30格/秒的电影系统的时间码和控制码 规范 | Cinematography; time and control code for 24, 25 and 30 frames per second motion-picture systems; specifications |
| ISO/IEC 10164-20 Technical Corrigendum 1-2002 | 信息技术.开放系统互连.系统管理:时间管理功能.技术勘误1 | Information technology - Open Systems Interconnection - Systems management: Time management function; Technical Corrigendum 1 |
| ISO/IEC 10164-20-1999 | 信息技术 开放系统互连 系统管理:时间管理功能 | Information technology - Open Systems Interconnection - Systems management: Time management function |
| ISO/IEC 10164-22-2000 | 信息技术.开放系统互连.系统管理:响应时间监视功能 | Information technology - Open Systems Interconnection - Systems Management: Response time monitoring function |
| ISO/IEC 14575-2000 | 信息技术.微处理机系统.异构型互连(HIC)(并行系统结构用的低成本、低等待时间可伸缩串行互连) | Information Technology - Microprocessor Systems - Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction) |
| ISO/IEC 18014-1-2008 | 信息技术.安全技术.时间标记业务.第1部分:框架 | Information technology - Security techniques - Time-stamping services - Part 1: Framework |
| ISO/IEC 18014-2-2002 | 信息技术.安全技术.时间标记业务.第2部分:产生独立标记的结构方式 | Information technology - Security techniques; Time-stamping services - Part 2: Mechanisms producing independent tokens |
| ISO/IEC 18014-3-2004 | 信息技术.安全技术.时间标记业务.第3部分:产生链接标记的机制 | Information technology - Security techniques - Time-stamping services - Part 3: Mechanisms producing linked tokens |
| ISO/IEC 8613-14-1997 | 信息技术 开放文件体系结构(ODA)和交换格式:时间关系和非线性结构 | Information technology - Open Document Architecture (ODA) and interchange format: Temporal relationships and non-linear structures |
| ISO/IEC 8824-1 AMD 3-2006 | 信息技术.抽象语法记法1(ASN.1).基本记法规范.修改件3:时间类型支持 | Information technology - Abstract Syntax Notation One (ASN.1): Specification of basic notation; Amendment 3: Time type support |
| ISO/IEC 8825-1 AMD 2-2007 | 信息技术.抽象语法记法1编码规则:基本编码规则(BER)、典型编码规则(CER)和分布式编码规则(DER)规范.修改件2 | Information technology - ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER); Amendment 2: Time type support |
| ISO/IEC 8825-2 AMD 2-2007 | 信息技术.ASN.1编码规则:包编码规则(PER)规范.修改件2:时间类型支持 | Information technology - ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) - Amendment 2: Time type support |
| ISO/IEC 8825-4 AMD 2-2006 | 信息技术.ASN.1编码规则:XML编码规则(XER).修改件2:时间型号支持 | Information technology - ASN.1 encoding rules: XML Encoding Rules (XER); Amendment 2: Time type support |
| ISO/TR 12351-1999 | 道路车辆 在碰撞试验中头部触点和持续时间的测定 | Road vehicles - Determination of head contact and duration in impact tests |
| ISO/TR 13283-1998 | 工业自动化 严格时间通信授权 严格时间通信系统中的用户需求和网络管理 | Industrial automation - Time-critical communications architectures - User requirements and network management for time-critical communications systems |
| ISO/TR 14813-4-2000 | 交通信息与控制系统 TICS体系框架模型 第4部分:参考模型指导时间 | Transport information and control systems - Reference model architecture(s) for the TICS sector - Part 4: Reference model tutorial |
| ISO/TS 10303-1010-2004 | 工业自动化系统和集成.产品数据表示和交换.第1010部分:应用模式:日期时间 | Industrial automation systems and integration - Product data representation and exchange - Part 1010: Application module: Date time |
| ISO/TS 10303-1014-2004 | 工业自动化系统和集成.产品数据表示和交换.第1014部分:应用模式:日期时间规定 | Industrial automation systems and integration - Product data representation and exchange - Part 1014: Application module: Date time assignment |
| ISO/TS 10303-1065-2004 | 工业自动化系统和集成.产品数据表示和交换.第1065部分:应用模式:时间间隔 | Industrial automation systems and integration - Product data representation and exchange - Part 1065: Application module: Time interval |
| ISO/TS 10303-1365-2004 | 工业自动化系统和集成.产品数据表示和交换.第1365部分:应用模式:时间间隔规定 | Industrial automation systems and integration - Product data representation and exchange - Part 1365: Application module: Time interval assignment |
| 编号 | 中文名称 | 英文名称 |