美国接头标准(ANSI joint standards)

ANSI |  BS |  DIN |  EN |  GB |  ISO |  JIS |  NF |  DIC
编号 中文名称 英文名称
ANSI B5.11-1964 多轴钻头用轴头和可调接头 Spindle Noses and Adjustable Adapters for Multiple Spindle Drilling Heads
ANSI J-STD-002-1992 元件引线、接线端、焊片、接头和金属丝的软钎焊性试验 Solderability tests for component leads, terminations, lugs, terminals and wires
ANSI PH3.101-1983 摄影(照相机).美国照相机用三角架接头(1/4英寸-20牙) Photography (Cameras) - Tripod Connections for American Cameras (1/4-Inch-20 Thread)
ANSI/API SPEC14L-2007 锁紧心轴和落地螺纹接头的规范 Specification for Lock Mandrels and Landing Nipples
ANSI/ASAE S366.2-2004 农业拖拉机和机械.一般用途快速液压接头 Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
ANSI/ASME A112.18.3-2002 泵固定件接头中防回流装置和系统的性能要求 Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
ANSI/ASME B107.2-2002 电动冲击式延伸、接合及万向接头套筒扳手(英制) Socket Wrenches, Extensions, Adaptors, and Universal Joints, Power Drive (Impact) (Inch Series)
ANSI/ASME MFC-3Ma-2007 用孔板、管接头和文杜利管测量管道中的液体流量 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle and Venturi
ANSI/ASTM D2609-2002 聚乙烯塑料管塑料插入接头规范 Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ANSI/ASTM D2672a-1996 使用溶解粘固剂的IPS PVC管用接头规范 Specification for Joints for IPS PVC Pipe Using Solvent Cement
ANSI/ASTM D3138-2004 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯无压管道系统构件之间转换接头用液状粘固剂规范 Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
ANSI/ASTM D3212-2007 使用软质人造橡胶密封料制塑料排水管和污水管用接头的规范 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ANSI/ASTM D5677-2005 用于航空喷气机涡轮燃料的玻璃纤维(玻璃纤维加固热硬化树脂)管与管件规范.粘合剂粘接接头型 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
ANSI/ASTM F1365-1991 采用柔性合成橡胶密封件的塑料地下管道接头耐水渗透性试验方法 Test Method For Water Infiltration Resistance Of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
ANSI/ASTM F1429-1999 用柔性合成橡胶密封件固定在套桶中的塑料地下管道接头组合力试验方法 Test Method For Assembly Force Of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located In The Bell
ANSI/ASTM F1986-2001 冷热饮用水系统用2型多层管压合配件和压合接头的规范 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-water Systems
ANSI/ASTM F1987-2001 循环加热系统用2型多层管、压合配件和压合接头的规范 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
ANSI/ASTM F2014-2000 管道非增强挤制T形接头规范 Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ANSI/ASTM F2634-2007 用拉力冲击法的聚乙烯(PE)熔接接头的实验室测试用试验方法 Test Method for Laboratory Testing of Polyethylene(pe) Butt Fusion Joints Using Tensile-impact Method
ANSI/ASTM F682a-1982 锻制碳素钢套管接头规范 Specification for Wrought Carbon Steel Sleeve-type Pipe Couplings
ANSI/ASTM F704-1997 管道系统法兰接头用螺栓长度的选用惯例 Practice for Selecting Bolting Lengths for Piping System Flanged Joints
ANSI/ASTM F722-1982 船上管道系统用焊接接头规范 Specification for Welded Joints for Shipboard Piping Systems
ANSI/ASTM F905-2004 聚乙烯鞍形熔融接头合格鉴定的实施规范 Practice for Qualification of Polyethylene Saddle Fusion Joints
ANSI/AWS C3.2M/C 3.2-2008 评定硬钎焊接头强度的标准方法 Standard Methods for Evaluating the Strength of Brazed Joints
ANSI/AWS D14.4/D 14.4M-2005 机械和设备焊接接头规范 Specification for Welded Joints in Machinery and Equipment
ANSI/AWWA C111-2006 韧性铸铁压力管和配件的橡胶垫接头 Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings
ANSI/CSA LC7-2009 管接头密封化合物和材料 Pipe Joint Sealing Compounds and Materials
ANSI/EIA 364-07B-1998 电连接件.压合接头变形试验程序 Electric Connectors - Crimp Contact Deformation Test Procedure
ANSI/EIA 5150000-1986 光学纤维和光缆接头的一般规范 Generic Specification for Optical Fiber and Cable Splices
ANSI/EIA 540ABAA-1991 引线间隙为0.635mm(0.25英寸)的塑料方形平接头用片载插孔的详细规范 Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635-mm (0.25-in) Lead Spacing (Gullwing)
ANSI/EIA 540ADAA-1992 电子设备用针状格子排列插孔的适配器-载体方形平接头的详细规范 Adaptor-Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment, Detail Specification for
ANSI/EIA 677-1997 小型电源接头销尺寸规范 Specification for Small Form Factor Power Connector Pin Dimensions
ANSI/EIA-364-93-2009 电气连接器用绝缘置换触点(IDC)的重复线接头和断开试验程序 Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors
ANSI/IEEE 1511-2004 额定电压为5kV至46 kV的系统上电力电缆、接头和终端故障的调查和分析指南 Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5kV Through 46 kV
ANSI/IEEE 404-2006 额定电压为2500-500000V的挤压介质电缆接头和层压介质电缆接头 Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500 V - 500 000 V
ANSI/IEEE 592-2007 高压电缆接头和可拆分连接器用暴露半导体护套的标准 Standard for Exposed Semiconducting Shields on High Voltage Cable Joints and Separable Connectors
ANSI/ISO 5675-1992 农业拖拉机和机械.一般用途快速液压接头 Agricultural tractors and machinery - General purpose quick-action hydraulic couplers
ANSI/SAE J1036-1993 农用拖拉机圆柱形液压系统管接头的尺寸标准 Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors
ANSI/SAE J512-1994 汽车管接头 Fittings, Automotive Tube
ANSI/SAE J513-1994 制冷用管接头(ANSI/SAE J513F的修订版) Refrigeration Tube Fittings
ANSI/SAE J518-1993 四螺栓拼合法兰型液压法兰管、管道及软管接头 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
ANSI/SAE J530-1994 汽车管件接头 Automotive Pipe Fittings
ANSI/SCTE 116-2006 5/8-24端口、内螺纹接头的规范 Specification for 5/8-24 Port, Female Adapters
ANSI/SCTE 59-2003 电介质接头上的中心对接 Center Conductor Bond to Dielectric Bond
ANSI/TIA-455-8-2000 使用光时域反射计(OTDR)测量接头损耗或连接器损耗和反射比 Measurement of Splice or Connector Loss and Reflectance Using an OTDR
ANSI/TIA/EIA 102BAAA-1-1999 项目25, FDMA共用气体管道接头,补充件1 Project 25 FDMA Common Air Interface Addendum 1
ANSI/UL 181-2008 工厂制通风管和通风管接头的安全标准 Standard for Safety for Factory-Made Air Ducts and Air Connectors
ANSI/UL 181B-2008 与柔性风管和风管接头一起使用的密闭系统的安全标准 Standard for Safety for Closure Systems for Use With Flexible Air Ducts and Air Connectors
ASME B16.29-2001 DWV类可锻铜和可锻铜合金钎焊连接排水管接头 (Wrought copper and wrought copper alloy solder joint drainage fittings - DWV)
ASME B16.39-1998 可锻铁螺纹管活接头:等级150、250和300 (Malleable iron threaded pipe unions; Classes 150, 250, and 300)
ASME MFC-3M Errata-1990 用孔板,管接头和文丘里管测量管道中的流量.正误表 (Measurement of fluid flow in pipes using orifice, nozzle, and Venturi; Errata)
ASME MFC-3M-1989 用孔板,管接头和文丘里管测量管道中的液体流量. (Measurement of fluid flow in pipes using orifice, nozzle, and Venturi)
ASTM A865/A865M-2006 钢管连接用黑色或镀锌(电镀)焊接或无缝钢螺纹接头标准规范 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
ASTM B687-1999(2005)e1 镀黄铜、镀铜和镀铬管接头标准规范 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
ASTM C443M-2007 用橡胶垫圈(米制)的混凝土管道和检修孔用接头的标准规范 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
ASTM C505-2005a 带橡胶垫圈接头的无钢筋混凝土灌溉水管标准规范 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM C505M-2005a 带橡胶垫圈接头的无钢筋混凝土灌溉水管标准规范(米制) Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
ASTM D1101-1997a(2006) 室外用层压结构木制品的胶合接头完整性的标准试验方法 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
ASTM D2855-1996(2002) 聚氯乙烯管和配件的溶剂粘固接头制作的标准实施规程 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
ASTM D2918-1999(2005) 受撕裂应力的胶粘接头耐用性的标准试验方法 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
ASTM D3138-2004 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯无压管道系统构件之间转换接头用液态粘结剂的标准规范 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
ASTM D3164-2003 用拉伸负荷法测定胶粘剂粘接塑料搭接接头剪切强度特性的标准试验方法 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3164M-2003 用拉伸负荷法测定胶粘剂粘接塑料搭接接头剪切强度性能的试验方法(米制) Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3212-2007 使用弹性柔性密封料制塑料排水管和污水管用接头的标准规范 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM D3433-1999(2005) 粘结接头中胶粘剂的断裂强度的标准试验方法 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3632-1998(2004) 用氧压法加速粘结接头老化的试验方法 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
ASTM D4161-2001(2005) 使用挠性弹性体密封件的"玻璃钢"(玻璃纤维增强热固树脂)管接头标准规范 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D4502-1992(2004) 木材粘结接头耐热和耐水性的标准试验方法 Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
ASTM D5249-1995(2006) 硅酸盐水泥混凝土和地沥青接头加热和制冷接缝密封胶衬垫材料的标准规范 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
ASTM D5656-2004e1 拉伸载荷法测定剪切中胶粘剂应力-应变性能用厚被粘物金属搭接-剪切接头的标准试验方法 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D6383-1999(2005) 由EPDM屋顶膜材料制造的胶粘剂接头的失效时间(蠕变破裂)的标准操作规程 Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
ASTM D7174-2005 混凝土面层和结构建造用预制闭孔聚烯烃伸缩接头填充料的标准规范 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM E677-1994(2004) 可互换的圆球形接头 Standard Specification for Interchangeable Spherical Ground Joints
ASTM F1674-2005 与PVC管一起使用的接头约束装置的标准试验方法 Standard Test Method for Joint Restraint Products for Use with PVC Pipe
ASTM F1986-2001(2006) 冷热饮用水系统用2型多层管、压合配件和压合接头的标准规范 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
ASTM F2014-2000(2006) 管道系统用非增强挤制T形接头标准规范 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
ASTM F2634-2007 通过拉力冲击法实验室测试聚乙烯(PE)熔接接头的用标准试验方法 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM F905-2004 聚乙烯鞍形熔融接头的合格证明的标准实施规程 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
IEEE 404-2000 额定电压2500V-500000V的挤压和层压介质铠装电缆接头 (Extruded and laminated dielectric shielded cable joints rated 2500 V to 500000 V)
IEEE 592-1990 高压电缆接头和可分离绝缘连接器的外露半导体护套 (Exposed semiconducting shields on high-voltage cable joints and separable insulated connectors)
UL 1363-1996 重新配置的临时电源接头 (Relocatable temporary power taps )
UL 194-1996 防火用球墨铸铁和灰铸铁压力管和配件加垫圈的接头 (Gasketed joints for ductile-iron pipe and fittings for fire protection service )
UL 218A-2004 柴油机中驱动离心点火泵用电池接头标准 (Standard for battery contactors for use in diesel engines driving centrifugal fire pumps )
UL 310-2003 电气快速联接接头 (Electrical quick-connect terminals)
UL 498A-1999 电流分接头和适配器 (Current taps and adapters )
UL 860-2001 易燃和可燃流体与消防用管接头 (Pipe unions for flammable and combustible fluids and fire-protection service )
编号 中文名称 英文名称

返回