| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| EN 1119-1996 | 塑料管道系统 玻璃增强热固塑料管和配件用接头 挠性和还原接合接头密封性和耐损伤性试验方法 | Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints |
| EN 12293-1999 | 塑料管道系统 热水和冷水用热塑性塑料管道和接头 安装组件耐热循环性的试验方法 | Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling |
| EN 12295-1999 | 塑料管道系统 热水和冷水用热塑性塑料管道和接头 接合处耐压力循环试验方法 | Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test method for resistance of joints to pressure cycling |
| EN 12308-1998 | 液化天然装置和设备 液化天然气管道中所用的法兰接头垫圈设计适配性试验 | Installations and equipment for LNG - Suitability testing of gaskets designed for flanged joints used on LNG piping |
| EN 12345-1998 | 焊接 带图示的有关焊接接头的多语种术语 | Welding - Multilingual terms for welded joints with illustrations |
| EN 12512-2001 | 原木结构 试验方法 机械紧固件形成接头的循环试验 | Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners |
| EN 12517-1998 | 焊缝的无损检验 焊接接头放射线检验 验收等级 | Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels |
| EN 12560-1-2001 | 法兰和其接头 指定等级的法兰垫片 第1部分：带或不带垫圈的非金属法兰垫片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
| EN 12560-2-2001 | 法兰和其接头 指定等级的法兰垫片 第2部分：钢制法兰用螺旋形垫片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
| EN 12560-3-2001 | 法兰和其接头 指定等级的法兰垫片 第3部分：非金属PTFE封套垫片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
| EN 12560-4-2001 | 法兰和其接头 指定等级的法兰垫片 第4部分：钢法兰用波纹状、平或插榫金属垫片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
| EN 12560-5-2001 | 法兰和其接头 指定等级的法兰垫片 第5部分：钢法兰用金属环接合垫片 | Flanges and their joints - Gaskets for Class-designated flanges - Part 5: Metallic ring joint gaskets for use with steel flanges |
| EN 12573-4-2000 | 静态无压焊接热塑料罐 第4部分：法兰接头的设计和计算 | Welded static non-pressurized thermoplastic tanks - Part 4: Design and calculation of flanged joints |
| EN 1277-1996 | 塑料管道系统 地下无压用热塑管道系统 弹性密封环型接头密封性试验方法 | Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints |
| EN 12797-2000 | 铜焊 铜焊接头的破坏性试验 | Brazing - Destructive tests of brazed joints |
| EN 12799-2000 | 铜焊 铜焊接头的破坏性试验 | Brazing - Non-destructive examination of brazed joints |
| EN 1281-1-1997+A1-1998 | 麻醉和呼吸设备 圆锥形接头器 第1部分：锥体和锥套 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets |
| EN 1281-2-1995 | 麻醉和呼吸设备 圆锥形接头 第2部分：螺纹承重连接头 | Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:1987 modified) |
| EN 12814-1-1999+AC-2003 | 热塑性塑料半成品的焊接接头试验 第1部分：弯曲试验 | Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test |
| EN 12814-2-2000 | 热塑性塑料半成品的焊接接头试验 第2部分：拉伸试验 | Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test |
| EN 12814-3-2000 | 热塑性塑料半成品的焊接接头试验 第3部分：拉伸蠕变试验 | Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test |
| EN 12814-4-2001 | 热塑性塑料半成品的焊接接头试验 第4部分：剥落试验 | Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test |
| EN 12814-5-2000 | 热塑性塑料半成品的焊接接头试验 第5部分：目测 | Testing of welded joints of thermoplastics semi-finished - Part 5: Macroscopic examination |
| EN 12814-6-2000 | 热塑性塑料半成品的焊接接头试验 第6部分：低温拉伸试验 | Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test |
| EN 12814-7-2002 | 热塑性塑料半成品的焊接接头试验 第7部分：采用腰形试样的拉伸试验 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
| EN 12814-8-2001+AC-2003 | 热塑性塑料半成品的焊接接头试验 第8部分：要求 | Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements |
| EN 13090-2000 | 建筑物中气体管道螺纹接头再密封方法 | Means for resealing threaded joints of gas pipework in buildings |
| EN 13100-1-1999 | 热塑性塑料半成品焊接接头的无损检验 第1部分：外观检查 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination |
| EN 1636-5-1997 | 无压力排水和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第5部分：针对接头 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints |
| EN 1707-1996 | 注射器、针头和其它医疗器械用有6%鲁尔的锥形接头 锁紧接头 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings |
| EN 1708-1-1999 | 焊接 钢件的焊接接头基础详细资料 第1部分：压力用途部件 | Welding - Basic weld joint details in steel - Part 1: Pressurized components |
| EN 1708-2-2000 | 焊接 钢件的焊接接头基础详细资料 第2部分：无内部压力用途部件 | Welding - Basic weld joint details in steel - Part 2: Non internal pressurized components |
| EN 1712-1997 | 焊接无损检验 焊接接头超声波检测 验收水平 | Non destructive examination of welds - Ultrasonic examination of welded joints - Acceptance levels |
| EN 1714-1997 | 焊接无损检验 焊接接头超声检验 | Non destructive examination of welds - Ultrasonic examination of welded joints |
| EN 1736-2000 | 制冷系统和热泵 软管元件 振动隔离器和伸缩接头 要求、设计和安装 | Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation |
| EN 1737-1998 | 高压多孔混凝土或开放结构轻集料混凝土预制件用钢筋板或框架焊接接头剪切强度的测定 | Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1739-1998 | 高压多孔混凝土或开放结构的轻集料混凝土制预制件之间接头内面力的剪切强度的测定 | Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 1741-1998 | 高压多孔混凝土或开放结构的轻集料混凝土制预制件之间接头的外面力的剪切强度的测定 | Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| EN 175201-804-1999 | 详细规范：圆形连接器 螺纹接头直径为1.6mm的圆接触件 | Detail specification: Circular connectors - Round contacts, size diameter 1,6 mm, threaded coupling |
| EN 1759-3-2003 | 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第2部分：铜合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges |
| EN 1759-4-2003 | 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第4部分：铝合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN 1989-2000 | 热塑性管道系统 埋地无压污水用接头 通过估计密封压力对热塑弹性塑料(TPE)密封接头的长时间密封性能的试 | Thermoplastics piping systems - Joints for buried non-pressure sewerage applications - Test method for long-term sealing performance of joints with thermoplastic elastomer (TPE) seals by estimating the sealing pressure |
| EN 20594-1-1993+A1-1997+AC-1996 | 注射器、针头及其他医疗器械为6%（鲁尔）的锥形接头 第1部分：一般要求 | Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment; part 1: general requirements (ISO 594-1:1986) |
| EN 25817-1992 | 钢弧焊接头 缺点质量分级指南 | Arc-welded joints in steel; guidance on quality levels for imperfections (ISO 5817:1992) |
| EN 25821-1991 | 电阻点焊电极帽接头 | Resistance spot welding, electrode caps (ISO 5821:1979) |
| EN 2591-217-2002 | 航空航天系列 光电连接元件 试验方法 第217部分：.在规定接线接片和在线接头电流内的电压降 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 217: Voltage drop under specified current for terminal lugs and in-line splices |
| EN 2591-218-2002 | 航空航天系列 光电连接元件 试验方法 第２１８部分：温度和电流循环变化使接线按片和在线接头引起老化 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 218: Ageing of terminal lugs and in-line splices by temperature and current cycling |
| EN 2591-219-2002 | 航空航天系列 光电连接元件 试验方法 第２１９部分：绝缘接线按片和在线接头电压强度 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 219: Voltage strength for insulated terminal lugs and in-line splices |
| EN 26891-1991 | 木材结构 机械紧固件接头 强度和变形特性测定的一般原则 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
| EN 26922-1993 | 粘合剂 对接头抗拉强度的测定 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987) |
| EN 28430-1-1992 | 电阻点焊 电极夹具 第1部分：锥形接头锥度1:10 | Resistance spot welding- Electrode holders- Part 1: Taper fixing 1:10 (ISO 8430-1:1988) |
| EN 28970-1991 | 木材结构 机械紧固件接头的试验 对木材密度要求 | Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:1989) |
| EN 295-1-1991+AA1-1996+A2-1996+A3-1999 | 排水管和下水道用陶瓷粘土管和管配件及管接头 第1部分：要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 1: requirements |
| EN 295-2-1991+A1-1999 | 排水管和下水道用陶瓷粘土管和管配件及管接头 第2部分：质量控制和取样 | Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 2: quality control and sampling |
| EN 295-3-1991+A1-1998 | 排水管和下水道用陶瓷粘土管和管配件及管接头 第3部分：试验方法 | Vitrified clay pipes and fittings and pipe joints for drains and sewers; part 3: test methods |
| EN 295-4-1995+AC-1998 | 排水管和下水道用陶瓷粘土管和管配件及管接头 第4部分：专用配件、管接头和配套附件的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adaptors and compatible accessories |
| EN 295-5-1994+A1-1999 | 排水管和下水道用陶瓷粘土管和管配件及管接头 第5部分：带孔的陶瓷粘土管及配件的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated virtrified clay pipes and fittings |
| EN 295-6-1995 | 排水管和下水道用陶瓷粘土管和管配件及管接头 第6部分：陶瓷粘土检修孔的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 6: Requirements for vitrified clay manholes |
| EN 295-7-1995 | 排水管和下水道用陶瓷粘土管和管配件及管接头 第7部分：管托起用陶瓷粘土管和接头的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking |
| EN 30042-1994 | 铝和铝焊合金弧焊接头 缺陷质量分级指南 | Arc-welded joints in aluminium and its weldable alloys - Guidance on quality levels for imperfections (ISO 10042:1992) |
| EN 3082-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′修理用焊接端的舱壁管接头 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, bulkhead welded end, for repair |
| EN 3083-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′修理用长焊接端舱壁管接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long welded end, for repair |
| EN 3084-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′修理用焊接端螺纹管接头 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Unions, welded end threaded for repair |
| EN 3244-2001 | 航空航天系列 钛合金管连接件8°30′双端口管接头 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, double ended |
| EN 3245-2001 | 航空航天系列 钛合金管连接件8°30′ 异径管接头 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, reducer |
| EN 3246-2001 | 航空航天系列 钛合金管连接件8°30′舱壁管接头 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead |
| EN 3247-2001 | 航空航天系列 钛合金管连接件8°30′舱壁焊接端管接头 | Aerospace series - Pipe coupling 8?30 in titanium alloy - Unions, bulkhead welded end |
| EN 3248-2001 | 航空航天系列 钛合金管连接件8°30′带锁异径管端管接头 | Aerospace series - Pipe coupling 8°30′in titanium alloy - Adaptors, reduced pipe end, with lockring |
| EN 3273-2001 | 航空航天系列 钛合金管连接件8°30′ 带动态梁密封端的弯管、十字管和三通接头 几何结构 | Aerospace series - Pipe coupling 8?30 - Dynamic beam seal end for elbows, tees and crosses; Geometric configuration |
| EN 3566-2001+AC-2003 | 航空航天系列 钛合金管连接件8°30′具有锁环的管接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Adaptors with lockring |
| EN 3690-2001+AC-2003 | 航空航天系列 钛合金管连接8°30′长舱壁管接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long |
| EN 3691-2001+AC-2003 | 航空航天系列 钛合金管连接8°30′长焊舱壁管接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Unions, bulkhead, long welded |
| EN 4026-2001 | 航空航天系列 钛合金管连接 8°30′三通接头 | Aerospace series - Pipe coupling 8?0 in titanium alloy - Tees |
| EN 4186-2001 | 航空航天系列 钛合金管连接8°30′四通管接头 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, cross |
| EN 4233-2001 | 航空航天系列 钛合金管连接 8°30′ 焊接螺纹管接头 | Aerospace series - Pipe coupling 8 Degree 30′in titanium alloy - Unions, welded, threaded |
| EN 4552-2003 | 航空航天系列 耐热钢37度球形联管节 焊接直接头 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight nipples, welded end; Inch series |
| EN 4553-2003 | 航空航天系列 耐热钢37度球形联管节 焊接90度弯接头 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Elbow 90?nipples, welded end; Inch series |
| EN 4554-2003 | 航空航天系列 耐热钢37度球形联管节 直螺纹管接头 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Straight unions, threaded; Inch series |
| EN 4557-2003 | 航空航天系列 耐热钢37度球形联管节 焊末端T形接头 英制系列 | Aerospace series - Pipe coupling 37? spherical, in heat resisting steel - Tees nipples, welded end; Inch series |
| EN 4563-2003 | 航空航天系列 耐热钢焊接联管节 T形接头 英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees; Inch series |
| EN 489-2003 | 热水分配管道 地下热水网用预隔热包覆的管道系统 成套钢铁管道设备的接头组件、聚氨酯热绝缘和聚乙烯外 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 512-1994+A1-2001 | 纤维水泥制品 压力管道和接头 | Fibre-cement products - Pressure pipes and joints |
| EN 514-2000 | 门窗建造用未增塑聚氯乙烯型材 焊接弯头和T型接头强度的测定 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the strength of welded corners and T joints |
| EN 545-2002 | 给水管道用球墨铸铁管、配件、附件及其接头 要求和试验方法 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 598-1994 | 污水工程用球墨铸铁管、配件、附件和其它接头 要求和试验方法 | Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods |
| EN 60239-1997 | 电弧炉用带螺纹座的圆柱形机制石墨电极和接头的标称尺寸 | Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces (IEC 60239:1997) |
| EN 60512-11-13-2002 | 电子设备用连接器 试验和测量 第11-13部分：气候试验 试验11n:气密 无焊包封接头 | Connectors for electronic equipment - Tests and measurements - Part 11-13: Climatic tests; Test 11n: Gas tightness, solderless wrapped connections (IEC 60512-11-13:2002) |
| EN 60874-17-1997 | 光纤和电缆的接头 第１７部分：纤维光学接头的部分规范 F-05型(磨擦锁定) | Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) (IEC 60874-17:1995 + Corrigendum 1996) |
| EN 61073-1-2000 | 光纤光缆机械式接头和熔接式接头保护盒 第1部分：通用规范 | Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification (IEC 61073-1:1999) |
| EN 639-1994 | 包括接头和配件的混凝土压力管的通用要求 | Common requirements for concrete pressure pipes including joints and fittings |
| EN 640-1994 | 包括接头和配件的钢筋混凝土压力管和分布式钢筋混凝土压力管(非圆柱型) | Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings |
| EN 641-1994 | 包括接头和配件的圆柱型钢筋混凝土压力管 | Reinforced concrete pressure pipes, cylinder type, including joints and fittings |
| EN 642-1994 | 包括接头、配件的圆柱型和非圆柱型预应力混凝土压力管和预应力钢管的特殊要求 | Prestressed concrete pressure pipes, cylinder and non-cylinder type, including joints, fittings and specific requirement for prestressing steel for pipes |
| EN 74-1988 | 用于由钢管制造的工作脚手架和工作架的管接头、活动套管和底板 要求和试验程序 | Couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes; Requirements and test procedures |
| EN 751-1-1996 | 接触第1、2、3家庭用燃气和热水的金属螺纹接头的密封材料 第1部分：气密连接 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds |
| EN 751-2-1996 | 接触第1、2、3家庭用燃气和热水的金属螺纹接头的密封材料 第2部分：非硬化连接 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds |
| EN 751-3-1996+AC-1997 | 接触第1、2、3家庭用燃气和热水的金属螺纹接头的密封材料 第3部分：非烧结过的聚四氟乙烯密封带 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes |
| EN 804-1994 | 塑料管道系统 压力管道溶焊接头的喷射铸造插接部件 瞬时内部液压阻力的试验方法 | Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure |
| EN 850-1996+A1-2000+AC-1998 | 可移动气瓶 医用枢接轭状阀门出口接头 | Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use |
| EN 876-1995 | 金属材料焊接的破坏试验 熔焊接头中焊接金属的纵向拉伸试验 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints |
| EN 877-1999 | 建筑物排水用铸铁管和配件及其接头和附件 要求、试验方法和质量保证 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance |
| EN 911-1995 | 塑料管道系统 热塑塑料压力管道用的弹性密封环型接头和机械接头 外部液压条件下防漏密封试验方法 | Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
| EN 969-1995+A1-1998 | 煤气管道用球墨铸铁管、配件、附件及其接头 要求和试验方法 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
| EN ISO 10321-1996 | 土工布 宽条样法对接头/接缝的拉身试验 | Geotextiles - Tensile test for joints/seams by wide-width method (ISO 10321:1992) |
| EN ISO 10692-1-2001 | 气瓶 微电子工业用气瓶阀接头 第1部分：出口接头 | Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections (ISO 10692-1:2001) |
| EN ISO 10692-2-2001 | 气瓶 微电子工业用气瓶阀接头 第2部分：气瓶阀接头的规范和定型试验 | Gas cylinders - Gas cylinder valve connections for use in microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001) |
| EN ISO 11144-1996 | 牙科设备 供水及排水管接头 | Dental equipment - Connections for supply and waste lines (ISO 11144:1995) |
| EN ISO 1120-2002 | 输送带 机械接头的强度测定 静态试验法 | Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2002) |
| EN ISO 11446-2002 | 乘用车和具有12伏电压系统的轻型商用车 牵引车和挂车之间的13极连接器的尺寸和接头的分布 | Passenger cars and light commercial vehicles with 12 V systems - 13-pole connectors between towing vehicles and trailers - Dimensions and contact allocation (ISO 11446:1995 and Amd. 1:1997) / Note: To be replaced by prEN ISO 11446 (2003-10). |
| EN ISO 13919-1-1996 | 焊接 电子束和激光焊接头 缺陷的质量分级指南 第1部分：钢 | Welding - Electrons and laser-beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996) |
| EN ISO 13919-2-2001 | 焊接 电子束和激光焊接头 缺陷的质量分级指南 第2部分：铝及其可焊合金 | Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001) |
| EN ISO 15614-8-2002 | 金属焊接工艺的规范和验收 焊接工艺试验 第8部分：管对管板接头焊接 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002) |
| EN ISO 15785-2002 | 技术制图 粘接接头、折叠接头和压接头的符号表示与标示 | Technical drawings - Symbolic presentation and indication of adhesive, folded and pressed joints (ISO 15785:2002) |
| EN ISO 5183-1-2000 | 电阻焊设备 外锥度1:10电极接头 第1部分：锥度1:10圆锥形接头 | Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998) |
| EN ISO 5183-2-2001 | 电阻点焊设备 外锥度1:10电极接头 第2部分：端推力电极用平行柄接头 | Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000) |
| EN ISO 5620-1-1996 | 造船及海上结构物 饮水舱的注水接头 第1部分：一般要求 | Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 1: General requirements (ISO 5620-1:1992) |
| EN ISO 5620-2-1996 | 造船及海上结构物 饮水舱的注水接头 第2部分：零件 | Shipbuilding and marine structures - Filling connection for drinking water tanks - Part 2: Components (ISO 5620-2:1992) |
| EN ISO 5828-2001 | 电阻焊设备 连接水冷接头的二次连接电缆 尺寸及特性 | Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics (ISO 5828:2001) |
| EN ISO 8092-1-1998 | 道路车辆 车载电气线束的连接 第1部分：单极连接接头 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996) |
| EN ISO 8092-3-1999 | 道路车辆 车载电气线束的连接 第3部分：多极连接接头 尺寸和特殊要求 | Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements (ISO 8092-3:1996) |
| EN ISO 8434-1-1997 | 用于流体传动和一般用途的金属管接头 第1部分：24度缩式管接头 | Metallic tube connections for fluid power and general use - Part 1: 24 degrees compression fittings (ISO 8434-1:1994) |
| EN ISO 8434-4-2000 | 用于流体传动和一般用途的金属管接头 第4部分：带O形圈焊接接头体的24度锥形管接头 | Metallic tube connections for fluid power and general use - Part 4: 24?degrees cone connectors with O-ring weld-on nipples (ISO 8434-4:1995) |
| EN ISO 9692-2-1998 | 焊接和相关工艺 接头的制备 第2部分：钢的埋弧焊 | Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) |
| EN ISO 9692-3-2001 | 焊接和相关工艺 接头制备的建议 第3部分：铝及铝合金的金属焊条惰性气体保护焊和钨焊条惰性气体保护焊 | Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
| EN ISO 9692-4-2003 | 焊接和相关工艺 接头制备的建议 第4部分：复合钢 | Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003) |
| prEN 1016-1993 | 塑料管道系统 非可塑聚氯乙烯一端受载的双孔接头 弯曲和内部压力时的密封性和强度试验方法 | Plastics piping systems; unplasticized poly(vinyl chloride) (PVC-U) end-load bearing double socket joints; test method for leaktightness and strength while subjected to bending and internal pressure |
| prEN 10311-1999 | 传送人类消耗的含水液体（包括水）的钢管和接头间的连接件 | Joints for the connection of steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption |
| prEN 10329-2002 | 岸上和海上管路钢管及配件 外表安装接头涂层 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| prEN 1115-2-1997 | 压力下地下排水和排污装置用塑料管道系统 基于非饱和聚酯树脂的玻璃增强热固性塑料（GRP） 第2部分：具挠 | Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| prEN 12560-6-2003 | 法兰和其接头 指定等级的法兰垫片 第６部分：钢法兰用有锯齿的金属垫片 | Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for uses with steel flanges |
| prEN 12560-7-2001 | 法兰和其接头 指定等级的法兰垫片 第７部分：钢法兰用有金属套的垫片 | Flanges and their joints - Dimensions of gaskets for Class designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges |
| prEN 12927-1-1997 | 索道客运的安全要求 钢索 第1部分：钢索及其端部接头的选择准则 | Safety requirements for passenger transport by rope - Ropes - Part 1: Selection criteria for ropes and their end fixings |
| prEN 12927-4-2001 | 索道客运的安全要求 钢索 第4部分：端部接头 | Safety requirements for passenger transportation by rope - Ropes - Part 4: End fixing |
| prEN 13100-2-2002 | 热塑性塑料半成品焊接接头的无损检验 第2部分：X射线检查法 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing |
| prEN 13100-3-2002 | 热塑性塑料半成品焊接接头的无损检验 第3部分：超声检测 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 3: Ultrasonic testing |
| prEN 1336-1993 | 塑料管道系统 热塑性压力管道用终端承载和无承开组件和接头 内部水压力下长期密封性试验方法 | Plastics piping systems; end-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping; test method for long-term leaktightness under internal water pressure |
| prEN 13476-1-2002 | 非压力地下排水和污水热塑性塑料管道系统 聚氯乙烯（PVC-U）、聚丙烯（PP）)和聚已烯（PE）的结构墙管道系 | Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for pipes, fittings and the syste |
| prEN 13763-7-2003 | 民用炸药 雷管和继电器 第7部分：引线、冲击管、接头、卷边和封闭机械强度的测定方法 | Explosives for civil uses - Detonators and relays - Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures |
| prEN 14257-2001 | 粘合剂 木材粘合剂 高温下搭接头的拉力强度的测定 | Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT91) |
| prEN 14258-2001 | 粘合剂 在特殊温度条件下接头长时和短时期暴露的机械性能 | Adhesives - Mechanical behaviour of joints subjected to short and long terms exposure at specified conditions of temperature |
| prEN 14364-2002 | 有或无压排水和排污塑料管线系统 玻璃纤维增强的未饱和的聚酯树脂基热固塑料管 塑料管管件及接头规范 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| prEN 1636-2-1996 | 无压力排水道和污水用塑料管道系统 不饱和聚脂树脂(UP) 基玻璃纤维增强热固性塑料(GRP) 第2部分：带有挠 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| prEN 1759-1-2000 | 法兰及其接头 管材、阀门、管件及附件用已命名种类的圆形法兰 第1部分：钢法兰NPS1/2到24 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| prEN 1763-2-2000 | 供气相丙烷和丁烷使用的挠性软管、管道及组装件 第2部分：对管咀接头及组装件的要求 | Flexible hose, tubing and assemblies for use with propane and butane in the vapour phase - Part 2: Requirements for nozzles, couplings and assemblies |
| prEN 1796-2-1995 | 有或无压力供水用塑料管道系统 非饱和性聚脂树脂基玻璃增强热固性塑料 第2部分：带挠性、缩口活节或刚性 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 2: Pipes with flexible, reduced articulation or rigid joints |
| prEN 185000-1992 | 通用规范：光学接头和光缆用光纤接头硬件 | Generic specification: fibre optic splice hardware for optical splices and cables |
| prEN 2591-220-2000 | 航空航天系列 光电连接元件 试验方法 第２２０部分：电流和温度循环变化使接触端／导线接头老化 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
| prEN 2608-1999 | 航空航天系列 锁环螺纹式8°0′管接头的安装和拆卸要求 | Aerospace series - Installation and removal requirements for 8?0 adaptoros, threaded with lockring |
| prEN 295-10-2001 | 排水管和下水道用陶瓷粘土管和管配件及管接头 第10部分：强制要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Mandated requirements |
| prEN 3079-1999 | 航空航天系列 管连接件8°30′ 直到 28000 kPa 异形接头米制系列 技术规范 | Aerospace series - Pipe coupling 8?30 up to 28000 kPa - Adaptors - Metric series - Technical specifiations |
| prEN 60603-7-4-2003 | 电气设备接头 第7-4部分：用于数据传输频率高达 250 MHz (第 6类, 未屏蔽)的8道活动和固定接头的技术规范 | IEC 60603-7-4, Ed. 1.0: Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| prEN 61076-2-101-2003 | 电子设备用连接器 第2-101部分：低压、开关和控制装置用带有M8和M12螺旋接头以及弹簧锁的圆形连接器的空白 | Connectors for electronic equipment - Part 2-101: Circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications |
| prEN 630-1992 | 铝及其焊接合金中的电弧焊接头 缺陷质量级别指南 | Arc-welded joints in aluminium and its weldable alloys; guidance on quality levels for imperfections (ISO/DIS 10042 modified) |
| prEN 762-1995 | 塑料管道和导管系统 热塑系统用弹性密封接头 密封环保持力和损坏的试验方法 | Plastics piping and ducting systems - Joints with elastomeric seals for thermoplastic systems - Test method for retention of, and damage to, sealing rings |
| prEN ISO 14617-3-2002 | 图表用图形符号 第3部分：接头及相关装置 | Graphical symbols for diagrams - Part 3: Connections and related devices (ISO/FDIS 14617-3:2002) |
| prEN ISO 15236-4-2000 | 钢芯传输带 第4部分：硫化橡胶传输带接头、设计、尺寸、要求、标记 | Steel cord conveyor belts - Part 4: Vulcanized belt joints; Design, dimensions, requirements, marking (ISO/DIS 15236-4:2000) |
| prEN ISO 15875-3-2002 | 冷热水塑料管道系统 交联聚乙稀（ PE - X ） 第3部分：接头 | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO/FDIS 15875-3:2002) |
| prEN ISO 15876-3-2002 | 冷热水塑料管道系统 聚丁稀（ PB ） 第3部分：接头 | Plastics piping systems for hot and cold water installations - Polybutylen (PB) - Part 3: Fittings (ISO/FDIS 15876-3:2002) |
| prEN ISO 15877-3-2002 | 冷热水用塑料管道系统 氯化聚氯乙烯（PVC-C）第3部分：接头 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO/FDIS 15877-3:2002) |
| prEN ISO 9018-2003 | 金属材料焊缝的破坏性试验 十字形与重叠 形接头的拉力试验 | Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO/FDIS 9018:2003) |
| prEN ISO 9692-1-2003 | 焊接和相关工艺 接头制备的推荐工艺 第1部分：钢的人工电弧焊、气体保护金属电弧焊、气焊和束焊 | Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO/FDIS 9692-1:2003) |
| 编号 | 中文名称 | 英文名称 |