| 编号 | 中文名称 | 英文名称 |
|---|---|---|
| DIN 11851-1998 | 食品,化学和医药工业用管接头.不锈钢制螺纹管连接件.滚压和焊接连接的设计 | Fittings for food, chemical and pharmaceutical industry - Stainless steel screwed pipe connections - Design for rolling in and welding-on |
| DIN 11852-2009 | 食品业、化工业用装置 不锈钢装置 焊接用三通管、弯头和异径接头 | Fittings for the food and chemical industries - Fittings of stainless steel - Tees, bends and reducers for welding |
| DIN 11854-1991 | 食品工业用管配件.不锈钢制软管.带螺纹的软管接头和软管锥形接头 | Food industry fittings; hose unions of stainless steel; threaded hose couplings, conical hose couplings |
| DIN 11865-2003 | 无菌、化学工业和药业用不锈钢配件.焊接用三通管、弯头和异径接头 | Stainless steels fittings for aseptic, chemical and pharmaceutical industries - Tees, bends, reducers for welding on |
| DIN 11887-1998 | 食品,化学和医药工业用管接头.圆螺纹连接件.螺纹连接件和锥形连接件的设计 | Fittings for food, chemical and pharmaceutical industry - Round thread connections - Design of threaded and conical connection pieces |
| DIN 12257-1981 | 实验室玻璃仪器.转换接头 | Laboratory glassware; adapters |
| DIN 12263-1963 | 球形磨制接头用夹子 | Clamps for spherical-ground joints |
| DIN 12784-1984 | 实验室玻璃仪器.带可互换磨口接头的温度计 | Laboratory glassware; thermometers with interchangeable ground joint |
| DIN 13090-4-1986 | 医疗器械用锥形接头.（经尿道前列腺）切除器用锁紧接头 | Conical fittings for medical equipment; lock fittings for resectoscopes |
| DIN 1380-2001 | 小便池接头.要求和试验 | Connectors for urinals - Requirements and testing |
| DIN 14244-2003 | 地上和地下消防用抽水接头 | Water suction connection for fire fighting - Under and above ground |
| DIN 14307-2-1986 | 抽吸用C型、标称压力16带密封圈的铝合金刚性接头 | Aluminium alloy solid coupling type C with sealing ring for suction purposes; nominal pressure 16 |
| DIN 14308-2-1986 | 抽吸用B型、标称压力16带密封圈的铝合金刚性接头 | Aluminium alloy solid coupling type B with sealing ring for suction purposes; nominal pressure 16 |
| DIN 14311-1985 | 标称压力为16抽吸和压力用铝合金消防水龙带C型管接头 | Aluminium alloy cap fire hose coupling type C, for pressure and suction purposes; nominal pressure 16 |
| DIN 14341-1986 | 标称压力为16的 铝合金C-D型转接接头 | Aluminium alloy C-D-adaptor for nominal pressure 16 |
| DIN 14342-1986 | 标称压力为16的 铝合金B-C型转接接头 | Aluminium alloy B-C-adaptor for nominal pressure 16 |
| DIN 14343-1986 | 标称压力为16 的铝合金A-B型转接接头 | Aluminium alloy A-B-adaptor for nominal pressure 16 |
| DIN 14640-1974 | 消防设备.喷射器、带孔轴、接头的安装 | Fire fighting equipment; fixing for projectors, boring pivot, joint |
| DIN 15325-1990 | 提升设备和服务提升设备.控制装置，信号装置和附加接头 | Lifts and service lifts; control devices, signals and additional fittings; ISO 4190-5, edition 1987 modified |
| DIN 1565-1997 | 有轨车辆用钢管配件.短管接头.双端短管接头.过渡接头 | Steel fittings for railway vehicles - Pipe nipples, double pipe nipples, swadged nipples |
| DIN 1566-1997 | 有轨车辆用钢管配件.双过渡接头.缩径双端短管接头 | Steel fittings for railway vehicles - Double nipples, reduced double nipples |
| DIN 1569-1997 | 有轨车辆用钢管配件.直角弯头.叉形接头 | Steel fittings for railway vehicles - Elbows, Y-fittings |
| DIN 16450-1994 | 未增朔聚氯乙烯压力管道的套管接头.符号 | Socket-fittings for pressure piping of unplasticized polyvinylchloride (PVC-U); symbols |
| DIN 16867-1982 | 化工管路用玻璃纤维增强式聚酯树脂管道、配件和接头.交货技术条件 | Glass fibre reinforced polyester resin (UP-GF) pipes, fittings and joints for use in chemical pipelines; Technical delivery conditions |
| DIN 16872-1993 | 热塑性塑料管道用管接头组件.玻璃纤维增强的聚酯树脂(UP-GE)法兰.尺寸 | Pipe joints assemblies for pipelines of thermoplastics; glass fibre reinforced polyester resin (UP-GF) flanges; dimensions |
| DIN 16928-1979 | 热塑性塑料管道.管接头、管道部件、管道敷设.一般说明 | Pipes of Thermoplastic Materials; Pipe Joints, Elements for Pipes, Laying; General Directions |
| DIN 16962-1-1980 | 1型和2型聚丙烯压力管道用管接头和零组件.对焊用弓形结构弯头.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends of Segmental Construction for Butt-welding, Dimensions |
| DIN 16962-11-1980 | 1型和2型聚丙烯压力管道用管接头和零组件.用于对焊的车削和压制减径管套.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions |
| DIN 16962-12-1999 | 聚丙烯(PP)制压力管道用管连接件和零件.PP-H 100,PP-B 80和PP-R 80.第12部分:承口焊接用凸缘接头、法兰、密 | Pipe joints and components of polypropylene (PP) for pipes under pressure, PP-H 100, PP-B 80 and PP-R 80 - Part 12: Flange adapters, flanges, sealing rings for socket welding; dimensions |
| DIN 16962-13-1987 | 1型和2型聚丙烯压力管道用管连接件和接头.管接头.尺寸 | Pipe joint assemblies and fittings for type 1 and type 2 polypropylene (PP) pressure pipes; pipe couplings; dimensions |
| DIN 16962-2-1983 | 1型和2型聚丙烯压力管道用管接头组件和接头.用对焊的分段嵌入和减颈方法制造的T型管及支管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions |
| DIN 16962-3-1980 | 1型和2型聚丙烯压力管道用管接头和零组件.对焊用管成形弯头.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Bends Formed from Pipe for Butt-welding, Dimensions |
| DIN 16962-4-1988 | 1型和2型聚丙烯压力管道用管道连接组件和管道配件.第4部分:熔焊、法兰和密封元件管接头尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions |
| DIN 16962-6-1980 | 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑弯头.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions |
| DIN 16962-7-1980 | 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑三通.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions |
| DIN 16962-8-1980 | 1型和2型聚丙烯压力管道用管接头和零组件.承插焊接用注塑管套和管帽.尺寸 | Pipe Joints and Elements for Polypropylene (PP) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions |
| DIN 16962-9-1983 | 1型和2型聚丙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 polypropylene (PP) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions |
| DIN 16963-10-1980 | 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑套筒与帽盖.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Sockets and Caps for Socket-welding, Dimensions |
| DIN 16963-11-1999 | 聚乙烯(PE)制压力管道用管连接件和零件.PE 80和PE 100.第11部分:承口焊接用凸缘接头、法兰、密封圈.尺寸 | Pipe joints and components of polyethylene (PE) for pipes under pressure, PE 80 and PE 100 - Part 11: Flange adapters, flanges, sealing rings for socket welding; dimensions |
| DIN 16963-13-1980 | 1型和2型高密度聚乙烯压力管道用管子接头与零件.对焊用车削的和压制的缩径承接件.尺寸 | Pipe Joints and Elements for High Pressure Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Turned and Pressed Reducing Sockets for Butt-welding, Dimensions |
| DIN 16963-14-1983 | 1型和2型高密度聚乙烯压力管道用管连接组件和接头.承插焊接用注塑减径管件与套管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; injection moulded reducers and nipples for socket welding; dimensions |
| DIN 16963-15-1987 | 高密度聚乙烯压力管道用管连接件和接头.管接头.尺寸 | Pipe joint assemblies and fittings for high-density polyethylene (HDPE) pressure pipes; pipe couplings; dimensions |
| DIN 16963-2-1983 | 1型和2型高密度聚乙烯压力管道用管接头组件和配件.用对焊的分段嵌入和缩颈方法制造的T型管及支管.尺寸 | Pipe joint assemblies and fittings for types 1 and 2 high-density polyethylene (HDPE) pressure pipes; tees and branches produced by segment inserts and necking for butt welding; dimensions |
| DIN 16963-3-1980 | 1型和2型高密度聚乙烯压力管道用管子接头与零件.对焊用弯管.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Pipe Bends for Butt-welding, Dimensions |
| DIN 16963-4-1988 | 高密度聚乙烯压力管道用管道连接组件和管道配件.第4部分:熔焊、法兰和密封元件管接头尺寸 | Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; adaptors for fusion jointing, flanges and sealing elements; dimensions |
| DIN 16963-8-1980 | 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑弯管.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Elbows for Socket-welding, Dimensions |
| DIN 16963-9-1980 | 1型和2型高密度聚乙烯压力管道用管子接头与零件.承插焊接用注塑三通管件.尺寸 | Pipe Joints and Elements for High Density Polyethylene (HDPE) Pressure Pipelines, Types 1 and 2; Injection Moulded Tee Pieces for Socket-welding, Dimensions |
| DIN 16966-2-1982 | 玻璃纤维增强式聚酯树脂管道配件和接头.弯管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Elbows, Dimensions |
| DIN 16966-4-1982 | 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.三通喷管嘴尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions |
| DIN 16966-5-1982 | 玻璃纤维增强聚酯树脂管(UP-GF)管件和接头.缩径管.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions |
| DIN 16966-6-1982 | 玻璃纤维增强聚酯树管(UP-GF)管件和接头组件.卡圈、法兰、密封圈、尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; collars, flanges, joint rings, dimensions |
| DIN 16966-8-1982 | 玻璃纤维增强聚酯管(UP-GF)管件和接头.层压塑料接头.尺寸 | Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Laminated joints; Dimensions |
| DIN 16967-2-1982 | 玻璃纤维增强环氧树脂(EP-GF)管件和接头.弯管、三通管、尺寸 | Glass fibre reinforced epoxy resin (EP-GF) pipe fittings and joints; Elbows, Tees, Dimensions |
| DIN 18195-8-2004 | 建筑物的防水性.第8部分:活动连接接头的防水性 | Water-proofing of buildings - Part 8: Water-proofing over joints for movements |
| DIN 18318-2006 | 建筑合同程序(VOB).第C部分:建筑合同通用技术规范(ATV).道路建设.接头易断裂的方块铺石和混凝土路面及环境 | Construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Road construction - Dry-jointed sett and slab pavements, and surrounds |
| DIN 19004-1980 | 快门线点动开关螺纹.接头和插口.连接尺寸 | Screw threads of shutter cable release; tip and socket, connecting dimensions |
| DIN 19560-10-1999 | 建筑物中耐热的废水和污物排放系统用聚丙烯(PP)管材和管接头.第10部分:燃烧特性.质量控制和推荐标准 | Pipes and fittings made of polypropylene (PP) for hot water resistant waste and soil discharge systems inside buildings - Part-10: Fire behaviour, quality control and installation recommendations |
| DIN 19850-2-1996 | 纤维水泥污水管和接头.第2部分:接头尺寸 | Fibre cement pipes and fittings for sewers - Part 2: Dimensions of joints |
| DIN 20029-1990 | 软管管接头.1:3 锥度量规 | Hose fittings; 1:3 taper gauges |
| DIN 20035-1990 | 软管管接头.法兰管嘴.公称压力16 | Hose fittings; flange nozzle; nominal pressure 16 |
| DIN 20036-1990 | 软管管接头.圆螺纹的管接头套管 | Hose fittings; coupling nipples with round thread form |
| DIN 20037-1990 | 软管管接头.连接套管.尺寸 | Hose fittings; connecting nipple; dimensions |
| DIN 20038-1990 | 软管管接头.接头管嘴 | Hose fittings; coupling nozzles |
| DIN 20040-1990 | 软管管接头.连接套管阀.公称压力16 | Hose fittings; nipple valves; nominal pressure 16 |
| DIN 21388-1988 | 绳索装置.通用接头 | Rope attachments; universal joints |
| DIN 22110-3-2007 | 输送带接头的测试方法.第3部分:输送带接头耐久性的测定(动态测试法) | Testing methods for conveyor belt joints - Part 3: Determination of time strength for conveyor belt joints (dynamical testing method) |
| DIN 22121-2000 | 煤矿用织物叠层输送带.单层或双层带的永久性连接接头.尺寸、要求和标记 | Conveyor belts with textile plies for coalmining - Permanent joints for belts with one or two plies; dimensions, requirements, marking |
| DIN 22418-1989 | 矿山预防潜在的爆炸环境用的电气设备；螺旋接头.安全性要求和试验 | Electrical apparatus for potentially explosive atmospheres for mining; screw plugs; safety requirements and testing |
| DIN 22419-2-2004 | 用于潜在爆炸性环境的采掘电气装置.电缆引入线.第2部分:引入线用密封接头.安全要求和检验 | Electrical apparatus for potentially explosive atmospheres for mining - Cable entries - Part 2: Gland adaptors for entries; safety requirements and testing |
| DIN 22434-3-2003 | 无烟煤地下开采照明.照明.技术规划基础.第3部分:T 形接头 | Underground lighting in hardcoal mining - Lighting-technological planning bases - Part 3: T-junctions |
| DIN 2353-1998 | 带环套的非焊接压力连接接头.完全压连接和概述 | Non-soldering compression fittings with cutting ring - Complete fittings and survey |
| DIN 28030-1-2003 | 容器和加工装置用法兰接头.第1部分:带法兰的设备用容器 | Flanged joints for vessels and process apparatus - Part 1: Apparatus flanged vessels |
| DIN 28139-1-1985 | 搪瓷容器的焊接颈.夹紧螺纹接头的H形主法兰.尺寸 | Welding necks for glass lined vessels; form H main flanges for clamp screw connections; dimensions |
| DIN 28145-5-1995 | 搪玻璃钢搅拌容器用焊接件.第5部分:底部泄料孔处绝缘接头 | Parts welded to glass lined steel agitator vessels - Part 5: Insulation collar at the bottom discharge opening |
| DIN 28601-2000 | 延性铸铁管道和配件.螺纹套管接头.组件、套管、螺丝环、密封环和滑动环 | Ductile iron pipes and fittings - Screwed socket joints - Assembly, sockets, screw rings, sealing rings and slip rings |
| DIN 28602-2000 | 球墨铸铁管及管件.栓接压盖密封接头.组件、套管、中间环、密封圈、螺栓和螺母 | Ductile iron pipes and fittings - Bolted gland joints - Assembly, sockets, counter ring, sealing ring, bolts and nuts |
| DIN 2880-1999 | 铸铁管、钢管和管接头的水泥砂浆管衬料的应用 | Application of cement mortar lining for cast iron pipes, steel pipes and fittings |
| DIN 30658-1-1998 | 地下煤气管道接头附加密封材料.第1部分:已密封煤气管道附加密封用塑料薄膜和织物衬套.安全要求和试验 | Materials for the subsequent sealing of joints in underground gas mains - Part 1: Plastic foil and textile fibre linings used to seal gaspipes already in place; safety requirements and testing |
| DIN 30658-2-1999 | 地下煤气管道用后续密封材料.第2部分:地下煤气管道接头用后续密封材料.安全要求和试验 | Materials for the subsequent sealing of underground gas mains - Part 2: Materials for the subsequent sealing of joints in underground gas mains; safety requirements and testing |
| DIN 30670-1991 | 钢管和管接头的聚乙烯涂层.要求和试验 | Polyethylen coatings of steel pipes and fittings; requirements and testing |
| DIN 3159-1965 | 标称压力25以下的制冷设备接头法兰的安装尺寸 | Assembling dimensions of flanges for fittings for refrigerating installations up to nominal pressure 25 |
| DIN 3281-1988 | 家用供水管道的阀门.公称压力10的锥形管子接头.概述 | Valves for domestic water supply; tapered union nipples nominal pressure 10; survey |
| DIN 3289-1988 | 家用供水管道的阀门.公称压力为10的螺纹连接管和联管节.带螺纹的锥形管子接头 | Valves for domestic water supply; nipples and unions nominal pressure 10; threaded tapered union nipples |
| DIN 3292-1-1984 | 家用安装设备配件.有色金属活接头螺母 | Fittings for domestic installation; nonferrous metal union nuts |
| DIN 3292-2-1984 | 家用安装设备配件.可锻铸铁活接头螺母 | Fittings for domestic installation; malleable cast iron union nuts |
| DIN 3334-1968 | 带法兰接头的加热装置用混合阀.标称压力为6、最高温度110 ℃的三通混合阀、四通混合阀.安装尺寸 | Mixing valves for heating installations with flanges, three way mixing valves, four way mixing valves, ND 6 max. 110 °C; installation dimensions |
| DIN 3383-4-1991 | 软管组件和连接配件.煤气用安全连接配件和试验室管路用接头 | Hose assemblies and connection fittings; safety connection fittings for gas and couplings for laboratory tubing |
| DIN 3387-2-1991 | 煤气管道用带法兰接头的金属管道管连接件 | Tube connections for metallic tubes having flanged ends for gas pipes |
| DIN 3389-1984 | 进宅供气和供水管路安装用商品绝缘接头.要求和检验 | Isolating joints ready for installation into service pipes in gas and water supply; built-in-isolating joints; requirements and tests |
| DIN 3475-1993 | 未处理水和可饮用水用的球墨铸铁管阀和管接头.内部涂搪瓷防腐蚀.质量要求和试验 | Valves and fittings of spheroidal cast iron for untreated and potable water; corrosion protection by internal enamelling; quality requirements, testing |
| DIN 3476-1996 | 生水和饮用水用阀门和接头.粉漆及环氧内涂防腐层.要求和检验 | Valves and fittings for untreated and potable water - Protection against corrosion by internal epoxy coating of coating powders (P) or liquid varnishes (F) - Requirements and tests |
| DIN 3533-1981 | 煤气装置用阀门.带压力接头的角度型旋阀 | Valves for gas installations; angle pattern stop cocks with compression fitting |
| DIN 3534-1982 | 气体装置阀.带压紧接头的直通型龙头 | Valves for gas installations; straight pattern taps with compression fitting |
| DIN 3538-1986 | 煤气装置阀门.蝶型阀.内螺纹接头 | Valves for gas installations; butterfly valves; female threaded ends |
| DIN 3799-1975 | 铁路及道路车辆集装箱连接件.接到标称直径80至100的螺纹接套上的5.5英寸减径接头 | Couplings for railway- and truck containers; reducers adapting 5<(hoch)1>/<(Index)2> inch to nipples nominal size 80 and 100 |
| DIN 3850-1998 | 压力连接管接头.概述 | Compression fittings - Summary |
| DIN 3852-11-1994 | 压合接头、阀门、螺旋塞和E型螺纹管堵用螺纹管堵和螺纹孔.设计尺寸 | Screwed stud-ends; tapped holes; for compression fittings, valves, screw plugs, screwed stud-ends type E; design dimensions |
| DIN 3853-2001 | 非钎焊和钎焊压合接头.与管接螺母使用的双头螺栓端部.设计图 | Non-soldering and soldering compression fittings - Stud ends for use with union nut; Design sheet |
| DIN 3854-1995 | 非钎焊和钎焊压紧联轴节.套管接头用螺纹孔.建造单 | Non-soldering and soldering compression couplings - Tapped holes for socket unions - Construction sheet |
| DIN 3861-2002 | 非焊螺旋活接头.卡套.设计 | Non-soldering compression fittings - Compression rings - Design |
| DIN 3865-2002 | 压合接头.符合 DIN EN ISO 8434-1 的压接用带 'O' 型密封圈的24度螺纹接头 | Compression fittings - Nipple 24° with O-ring - For compression joint according to DIN EN ISO 8434-1 |
| DIN 3866-1990 | 制冷.螺纹堵塞.额定用于40公称压力的非钎焊压紧管接头的90°扩口法兰 | Refrigeration; threaded stem; 90° flared flanges for solderless compression couplings rated for PN 40 |
| DIN 3870-2001 | 非钎焊和钎焊压合接头.管接螺母系列LL | Non-soldering and soldering compression fittings - Union nuts series LL |
| DIN 3871-1995 | 非钎焊和钎焊压紧联轴节.套管接头 | Non-soldering and soldering compression couplings - Socket unions |
| DIN 3872-2003 | 非焊接压紧联轴节.对接结构活接头螺母 | Non-soldering compression couplings - Union nuts for butt joints |
| DIN 3901-2001 | 带切割环的非钎焊压合接头.钝端A型带平行螺纹的双钝端接头 | Non-soldering compression fittings with cutting ring - Double ended stud ends with parallel thread for stub ends type A |
| DIN 3904-1987 | 椭圆形压接管接头.螺柱式插接肘节管 | Olive type compression couplings; male stud elbows |
| DIN 3907-1987 | 椭圆形压接管接头..螺柱式插接三通管接头（螺柱分管） | Olive type compression couplings; male stud tees (stud branch) |
| DIN 3914-1987 | 椭圆形压接管接头.螺柱式插接三通管接头（螺柱插接） | Olive type compression couplings; male stud tees (stud run) |
| DIN 3942-2002 | 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 | Non-soldered compression fittings - Swivel elbows with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3943-2002 | 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 | Non-soldered compression fittings - Swivel branch tees with 24° cone connectors with O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3944-2002 | 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用可调节的带24度锥形联接器和 'O' 型密 | Non-soldered compression fittings - L-adaptors with 24° cone connectors and O-ring - Adjustable, for design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3945-2002 | 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用带24度锥形联接器和 'O' 型密封圈的直 | Non-soldered compression fittings - Straight stud swivel adaptor with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3946-2002 | 非焊接的压合接头.符合 DIN EN ISO 8434-1 的压接端头的设计和定型用带24度锥形联接器和 'O' 型密封圈的直 | Non-soldered compression fittings - Straight reducing swivel adaptors with 24° cone connectors with O-ring - For design and type of compression end according to DIN EN ISO 8434-1 |
| DIN 3955-2001 | 带切割环的非钎焊压合接头.柱螺栓端A型带平行螺纹和轴杆的双头螺栓连接端 | Non-soldering compression fittings with cutting ring - Double ended stud ends with parallel threads and shaft for stud ends type A |
| DIN 4000-80-2005 | 事物特性表.第80部分:螺纹接头、冷成型丝锥和螺纹板牙 | Tabular layouts of properties - Part 80: Screwing tabs, cold forming taps and screwing dies |
| DIN 4060-1998 | 带弹性密封件的下水道和污水管用接头.对弹性密封件的接头的要求和试验 | Joints of sewer and drain pipes with elastomeric seals - Requirements and testing on joints with elastomeric seals |
| DIN 41652-3-1990 | φ1mm的圆形触点、梯形机柜连接器.A型结构尺寸.室外布线用钎焊接头 | Rack and panel connectors, trapezoidal, round contacts 1 mm; dimensions of type A; solder termination for free wiring |
| DIN 42017-1984 | 小型电动机线路接头的配置和标记 | Marking and coordination of the connecting leads for small motors |
| DIN 42021-1-1976 | 步进电机.安装尺寸、铭牌、电气接头 | Step motors; mounting dimensions, type plate, electrical connection |
| DIN 46199-5-1976 | 第5部分:定时继电器的接头标记 | Terminal markings of specified-time relays |
| DIN 46199-6-1974 | 电器开关设备.第6部分:压力和温度开关设备的接头标记 | Electrical switchgear; terminal markings for pressure and temperature, sensitive devices |
| DIN 46228-2-1992 | 带及不带绝缘夹的压接式端部接头 | Crimp-type end-splices, with and without insulation grip |
| DIN 46228-3-1992 | 不带绝缘夹的导线端部环绕接头 | Conductor-embracing end-splices, without insulation grip |
| DIN 46267-1-1985 | 铜导线用非耐张力的压制接头 | Non tension-proof compression joints for copper conductors |
| DIN 46267-2-1985 | 铝导线用非耐张力的压制接头 | Non tension-proof compression joints for aluminium conductors |
| DIN 46276-1-1991 | 第1部分:层状柔性母线和扁接线端用膨胀接头 | Expansion joints for busbars and flat terminals; lamellar flexible |
| DIN 46276-2-1991 | 第2部分:层状高柔性母线和扁接线端用膨胀接头 | Expansion joints for busbars and flat terminals; lamellar high flexible |
| DIN 46329-1983 | 铝导线用环形压接的电缆接头耳 | Cable lugs; for compression connections, ring type, for aluminium conductors |
| DIN 46330-2-1981 | 接头规格为２·８的无绝缘套的短插座 | Short receptacles; without insulating sleeve, for tab size 2,8 |
| DIN 46340-1-1981 | 接头规格为２·８的快速插入插座 | Snap-in receptacles for tab size 2,8 |
| DIN 46340-3-1981 | 接头规格为6·３的快速插入插座 | Snap-in receptacles for tab size 6,3 |
| DIN 46340-4-1981 | 接头规格为９·５的快速插入插座 | Snap-in receptacles for tab size 9,5 |
| DIN 46340-5-1981 | 接头规格为７·7的快速插入插座 | Snap-in receptacles for tab size 7,7 |
| DIN 47619-1-1979 | 通信电缆接头.对称多股绞合电缆 | Splicing of telecommunication cables; cable with symmetrical stranding components |
| DIN 47633-1984 | 通信电缆的同轴电缆接头.要求和试验 | Coaxial splices in telecommunication cables; requirements, tests |
| DIN 47635-1973 | 铸造金属电缆接头用垫片槽和褶皱 | Gasket grooves and folds for cast-metal cable fittings |
| DIN 477-5-2002 | 气瓶阀.第5部分:最大试验压力为450巴.出口接头 | Gas cylinder valves - Part 5: For test pressure up to 450 bar max.; Outlet connections |
| DIN 48069-2-1980 | 架空线路用带保护接头的双环 | Double eyes with protective fitting, for overhead power lines |
| DIN 48085-1-1985 | 架空线路用铜导线的全拉力压制接头 | Full tension compression joints, for copper conductors, for overhead lines |
| DIN 48085-2-1985 | 架空线路用铝导线的全拉力压制接头 | Compression connectors, restistant to high tensile stresses, for aluminium-conductors |
| DIN 48085-3-1985 | 架空线路用ACSR导线的全拉力压制接头 | Full tension compression joints, for ACSR-conductors, for overhead lines |
| DIN 48207-3-2005 | 额定电压超过1KV的架空线.导体安装的方法和设备.第3部分:带球形接头的电缆连接件 | Overhead lines with nominal voltages exceeding 1 kV - Methods and equipment for the installation of conductors - Part 3: Cable couples with spherical joint |
| DIN 49017-2-1981 | 电气设备用导管和管接头.刚性非火焰扩散绝缘导管和管接头.轻压力强度用带接头的光滑导管和带接头的弯头 | Conduits and fittings for electrical installation; rigid nonflame propagating insulating conduits and fittings; plain conduits with coupler and bends with coupler for light pressure strength |
| DIN 49020-1959 | 电线导管.带螺纹钢制导管、普通导管和管接头 | Conduit for Electrical Wiring; Screwed Steel Conduit, Plain Conduit, Couplers |
| DIN 49023-1975 | 电气设备用导管和接头.柔性波纹钢管 | Conduits and fittings for electrical installation; flexible corrugated conduits of steel |
| DIN 49360-3-1986 | D型熔断器.第16部分:管接头螺钉扳手用带功能尺寸的 E 16 测量环 | D-type fuses; E 16 gauge rings with functional dimensions for adapter screw fitters |
| DIN 49985-1971 | 电照明接头（发光设备）.玻璃灯泡的橡胶连接件 | Electric lighting fittings (luminaires); rubber joint for glass-globes |
| DIN 54455-1984 | 金属粘合剂和金属粘结接头的检验.扭剪试验 | Testing of adhesives for metals and of bonded metal joints; torsional shear test |
| DIN 5466-1-2000 | 花键接头,载荷能力计算.第1部分:一般基础 | Splined joints, calculation of load capacity - Part 1: General basis |
| DIN 57220-3-1977 | ≤1kV电力电缆设备中带单个和多个绝缘件电缆接头规范 | Specifications for single- and multiple cable clamps with insulating parts in electrical power cable installations up to 1000 V |
| DIN 58300-1982 | 外科器械接头 | Joints for surgical instruments |
| DIN 58736-3-2001 | 光学加工.定心罩.第3部分:外连接用圆柱形接头.尺寸12mm和25mm | Production in optical engineering - Centering bells - Part 3: With cylindrical fitting dimension 12 mm and 25 mm for outer connection |
| DIN 65030-1997 | 航空航天.带截环的管螺纹接头.交货技术条件.对新设计无效 | Aerospace - Solderless tube fittings with coupling sleeves, flaveless - Technical specification; inactive for new design |
| DIN 65053-1992 | 航空航天.操纵钢缆接头.技术规范.不适用于新设计 | Aerospace; control cable fittings; technical specification; inactive for new design |
| DIN 6660-1996 | 风动管道系统.无增塑剂聚氯乙烯(硬聚氯乙烯)传送管,传送管弯头和接头 | Pneumatic tube systems - Conveyor tube, conveyor tube bend and sleeves for pneumatic tube lines of unplasticized polyvinylchloride (PVC-U) |
| DIN 68140-1-1998 | 木制指形接头.第1部分:承载结构用软木的指形接头 | Wood finger-jointing - Part 1: Finger jointing of softwood for load-bearing structures |
| DIN 68601-2002 | 胶粘的木制品接头.术语和定义 | Bonded wood joints - Terms and definitions |
| DIN 71428-1989 | 椭圆形压接连接的管接头.用联管螺母连接的圆柱形螺纹旋入连接管 | Compression couplings with olives; cylindrical thread nipples for use with union nuts |
| DIN 71429-1989 | 椭圆形压接连接的管接头.用联螺母连接的闷头压接联接器的小螺柱和肘节管接头 | Compression couplings with olives; bulkhead compression couplings small stud and elbow fittings for use with union nuts |
| DIN 71430-1989 | 椭圆形压接连接的管接头.用联管螺母旋转连的管接头 | Compression couplings with olives; swiveling fittings for use with union nuts |
| DIN 71433-1989 | 椭圆形压接连接的管接头.用联螺母连接的的三通管接头和肘节管接头 | Compression couplings with olives; T-fittings and elbow fittings for use with union nuts |
| DIN 71436-1989 | 橄榄形压紧联接器.与管接头配用的空心螺钉管接头和环形管接头 | Compression couplings with olives; hollow screw fittings and ring connection fittings for use with union nuts |
| DIN 71752-1994 | 叉形接头.叉头 | Fork joints; yokes |
| DIN 71802-1992 | 带开口簧环或不带开口簧环的球形接头 | Ball joints with or without circlips |
| DIN 71985-1-1982 | 控制装置用缆索的内接头.储柜的内接头 | Nipples for cables for controls; receiver nipple |
| DIN 71985-2-1982 | 控制装置用缆索的管接头.钎焊管接头 | Nipples for cables for controls; nipples for soldering |
| DIN 71985-3-1982 | 控制装置用缆索的内接头.夹紧内接头 | Nipples for cables for controls; clamping nipples |
| DIN 71985-4-1982 | 绳索传动装置的内接头.第4部分:挤压内接头 | Nipples for cables for controls; nipples for swaging |
| DIN 71991-1982 | 控制装置电缆用带螺纹的接头 | Threaded end-fittings for cables for controls |
| DIN 72535-1979 | 点火线圈和点火分电器用高压接头 | High tension connection for ignition coils and distributors |
| DIN 73353-1977 | 带圆柱接头的油浴式空气滤清器 | Oil-wetted airfilters with cylindrical connection |
| DIN 74225-1991 | 液压制动软管组件.制动用软管接头.制动软管夹 | Brake hose assemblies; brake hose fittings; brake hose clips |
| DIN 74304-1987 | 压接管接头.软管接头 | Compression coupling; hose coupling |
| DIN 74313-1-1994 | 非焊接压缩管接头.渐缩管.A型和B型 | Non-soldering compression fittings; reducers; type A and B |
| DIN 74313-2-1994 | 非焊接压缩管接头.渐缩管.C型和D型 | Non-soldering compression fittings; reducers; type C and D |
| DIN 7588-1994 | 家装设备用水管配件.平密封螺旋接头.压力10巴的一端带内螺纹,另一端带钢管喷嘴、铜管喷嘴或套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7589-1994 | 家装设备用水管配件.平密封螺旋接头.压力10巴的一端带外螺纹,另一端带钢管喷嘴、铜管喷嘴和套管 | Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10 |
| DIN 7601-1998 | 带球形衬套的压接接头.完整接头和概述 | Compression couplings with ball-type nipples - Complete unions and survey |
| DIN 7632-1985 | 带球面衬套的压紧连轴器.变径接头 | Compression couplings with spherical liner; reducers |
| DIN 7633-2003 | 带球衬的压合接头.钎焊用管接头 | Compression fittings with spherical liners - Adapters for brazing |
| DIN 7637-1985 | 带球形衬的压接管接头.焊接转接器 | Compression fittings with spherical liners; adaptars for welding |
| DIN 7638-1985 | 带球形衬的压接管接头.等长度弯管 | Compression couplings with spherical liner; equal elbows |
| DIN 7639-1985 | 带球形衬的压接管接头.等长度三通连接管 | Compression couplings with spherical liner; equal tees |
| DIN 7640-1985 | 带球形衬的压接管接头.等长度四通连接管 | Compression couplings with spherical liner; equal crosses |
| DIN 7642-1997 | 管螺纹连接.钎焊连接环形管接头 | Compression couplings - Ring type nipples for brazed connection |
| DIN 7644-1985 | 带球形衬的压接管接头.环形套管的插桩式鼓形螺栓 | Compression couplings with spherical liner; male studed banjo bolts for ring type nipples |
| DIN 7647-1995 | 带球形衬里的压紧联轴节.平行旋入式接头 | Compression couplings with spherical liners - Adaptors with parallel screwed-in ends |
| DIN 8063-1-1986 | 未增塑聚氯乙烯压力管道用管连接组件和接头.承口弯头尺寸 | Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of socket bends |
| DIN 8063-10-2002 | 加压管道用未增塑聚氯乙烯的管道连接件和部件.第10部分:管壁支架弯管接头.尺寸 | Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 10: Wall bracket elbows; Dimensions |
| DIN 8063-12-1987 | 未增塑聚氯乙烯压力管道的管连接组件和接头.带法兰的和承口接头的尺寸 | Pipe joint assemblies and fittings of unplasticized polyvinyl chloride (U-PVC) pressure pipelines; dimensions of flanged and socket fittings |
| DIN 8063-3-2002 | 加压管道用未增塑聚氯乙烯的管道连接件和部件.第3部分:管接头:尺寸 | Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 3: Unions; Dimensions |
| DIN 8063-4-1983 | 未增塑聚氯乙烯压力管道用管连接组件和接头.内外螺母、法兰盘、密封件.尺寸 | Pipe joint assemblies and fittings for unplasticized polyvinyl chloride (PVC-U) pressure pipes; bushings, flanges, seals; dimensions |
| DIN 8063-5-1999 | 未增塑聚氯乙烯压力管道用管接头和元件(PVC-U).第5部分:一般质量要求、试验 | Pipe joints components of unplasticized poly(vinyl chloride) (PVC-U) for pipes under pressure - Part 5: General quality requirements, testing |
| DIN 8063-8-2002 | 加压管道用未增塑聚氯乙烯的管道连接件和部件.第8部分:溶剂粘结用喷射模塑套管、帽和管接头.尺寸 | Pipe joints and components of unplasticized poly(vinyl chloride) (PVC U) for pipes under pressure - Part 8: Injection-moulded sockets, caps and nipples for solvent cementing; Dimensions |
| DIN 808-1984 | 机床.万向接头.规格、连接尺寸、负载能力、安装 | Machine tools; cardan joints; sizes, connecting dimensions, loading, installation |
| DIN 82004-1-2008 | 带椭圆孔眼、双耳和圆孔眼接头配件的松紧螺丝扣.第1部分:非合金质量钢 | Turnbuckles with oval eyes, double lugs and round eyes head fittings - Part 1: Non-alloy quality steel |
| DIN 82004-2-2008 | 带椭圆形孔眼、双耳和圆形孔眼接头配件的松紧螺丝扣.第2部分:不锈钢 | Turnbuckles with oval eyes, double lugs and round eyes head fittings - Part 2: Stainless steel |
| DIN 82006-1-2008 | 带螺纹柄的椭圆形孔眼接头配件.第1部分:旋转接头和松紧螺丝扣用非合金质量钢 | Oval eye head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel |
| DIN 82006-2-2008 | 带螺纹柄的椭圆形孔眼接头配件.第2部分:松紧螺丝扣用不锈钢 | Oval eye head fittings with threaded shank - Part 2: For turnbuckles, stainless steel |
| DIN 82008-1-2008 | 带螺纹柄的双耳接头配件.第1部分:旋转接头和松紧螺丝扣用非合金质量钢 | Double lug head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel |
| DIN 82008-2-2008 | 带螺纹柄的双耳接头配件.第2部分:松紧螺丝扣用不锈钢 | Double lug head fittings with threaded shank - Part 2: For turnbuckles, stainless steel |
| DIN 82010-1-2008 | 带螺柄的螺柱孔眼配件.第1部分:旋转接头和松紧螺丝扣用非合金质量钢 | Stud-eye head fittings with threaded shank - Part 1: For swivels and turnbuckles, non-alloy quality steel |
| DIN 82048-1990 | 跨距万向接头双叉件 | Double yoke pieces for span trunnion |
| DIN 8526-1977 | 钎焊接头检验.接缝钎焊接头、剪切试验、蠕变剪切试验 | Testing of Soldering Joints; Gap Soldered Joints, Shear Test, Creep Shear Test |
| DIN 86041-2-1996 | 焊接法兰.第2部分:舷外接头.公称压力10、16、40 | Welding flanges - Part 2: Outboard connections, nominal pressure 10, 16, 40 |
| DIN 86103-1996 | 公制细螺纹和惠氏管螺纹管接头用分岔接管 | Sockets for screwed ends with metric fine thread and Whitworth pipe thread |
| DIN 86126-2000 | 船舶用压合接头.公制螺纹24级接头.类型和尺寸 | Compression fittings for shipboard use - 24° fittings with metric thread - Types and dimensions |
| DIN 86127-2000 | 舰船用压缩式接头.米制螺纹24级接头.技术规范 | Compression fittings for shipboard use - 24 fittings with metric thread - Technical specification |
| DIN 86200-1989 | 灭火和甲板冲洗设备.软管接头.管件.软管.附件.造船用各类管件产品概要 | Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding |
| DIN 86204-1993 | 船舶用黄铜制公称压力16的C型整体消防软管接头 | Solid fire hose coupling type C, PN 16; made of brass, for use on ships |
| DIN 86205-1993 | 船舶用黄铜制公称压力16的B型整体消防软管接头 | Solid fire hose coupling type B, PN 16; made of brass for use on ships |
| DIN 86211-1991 | 公称压力（PN）16、带C或B型消防软管管接头和带法兰连接的灭火阀 | Fire valves for PN 16, with fire hose couplings type C or B and with flange connection |
| DIN 86284-1997 | 饮用水、灭火水、污水、油和含油混合剂的输送和接受用管接头类型.概要 | Types of joints for disposal and refuelling of drinking water, fire fighting water, sewage, oil and oily mixtures - Synopsis |
| DIN 86287-1999 | 船舶和海上建筑结构的管道.带插接口和插套的钢管和管接头.铺设和处理 | Pipework on ships and marine structures - Steel pipes and fittings with spigot and socket - Laying and treatment |
| DIN 87343-1976 | 手动带传动管的遥控传动装置.焊入接头的叉形联杆 | Remote control gear with transmission tubing for manual operation; fork links for welding-in connection |
| DIN 8906-1990 | 制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头 | PN 40 flared flange solderless compression couplings for use in refrigerating systems |
| DIN 8912-1990 | 制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头用的接头螺母和螺纹堵塞 | Coupling nuts and screwed plugs for use with PN 40 flared flange solderless compression couplings in refrigerating systems |
| DIN 8914-1990 | 制冷系统用40公称压力扩口法兰的非钎焊接压紧管接头用的90°锥体密封环和密封盖 | 90° tapered seal rings and caps for use with PN 40 flared flange solderless compression couplings in refrigerating systems |
| DIN 9798-1980 | 食品加工机械.灌香肠机.灌料管和灌料接头 | Food equipment; sausage stuffers, filling horns and connections |
| DIN EN 10242-1995 | 可锻铸铁螺纹管管接头 | Threaded pipe fittings in malleable cast iron; German version EN 10242:1994 |
| DIN EN 10242/A1-1999 | 可锻铸铁螺纹管管接头.修正A1 | Threaded pipe fitting in malleable cast iron; Amendment A1; German version EN 10242:1994/A1:1999 |
| DIN EN 10311-2005 | 水和其他含水液体传送用钢管和配件的连接用接头 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids; German version EN 10311:2005 |
| DIN EN 1075-2000 | 木质构件.试验方法.金属板冲压紧固件连接接头 | Timber structures - Test methods - Joints made with punched metal plate fasteners; German version EN 1075:1999 |
| DIN EN 12061-1999 | 塑料管道系统.热塑管接头.耐冲击性能试验方法 | Plastics piping systems - Thermoplastics fittings - Test method for impact resistance; German version EN 12061:1999 |
| DIN EN 12295-1999 | 塑料管道系统.热水和冷水用热塑性塑料管和相关管件.管接头耐循环压力的检测方法 | Plastics piping systems - Thermoplastics pipes and associated fittings for hot and cold water - Test methods for resistance of joints to pressure cycling; German version EN 12295:1999 |
| DIN EN 12512-2005 | 木结构.试验方法.机械紧固件接头的循环试验 | Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners; English version of DIN EN 12512:2001 + A1:2005 |
| DIN EN 12517-1-2006 | 焊接连接的无损试验.第1部分:通过X光透视评定钢、镍、钛及其合金焊接接头.允许极限 | Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels; English version of DIN EN 12517-1:2006-06 |
| DIN EN 12517-2-2008 | 接头的无损检验.第2部分:通过射线照相术评估铝及铝合金的焊接接头.验收等级 | Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels; English version of DIN EN 12517-2:2008-12 |
| DIN EN 1254-4-1998 | 铜和铜合金.管配件.第4部分:把其它连接端头和毛细管或压力接头相连接的管件 | Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends; German version EN 1254-4:1998 |
| DIN EN 12560-1-2001 | 法兰及其接头.分级标识法兰用垫圈.第1部分:有或无插件的非金属平垫圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 12560-1:2001 |
| DIN EN 12560-2-2001 | 法兰及其接头.分级标识法兰用垫圈.第2部分:钢法兰用绕制螺旋形密封垫 | Flanges and their joints - Gaskets for class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges; German version EN 12560-2:2001 |
| DIN EN 12560-3-2001 | 法兰及其接头.分级标识法兰用垫圈.第3部分:非金属PTFE包封垫圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 12560-3:2001 |
| DIN EN 12560-4-2001 | 法兰及其接头.分级标识法兰用垫圈.第4部分:钢法兰用波纹形、平的或开槽的金属和嵌条金属垫圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; German version EN 12560-4:2001 |
| DIN EN 12560-5-2001 | 法兰及其接头.分级标识法兰用垫圈.第5部分:钢法兰用金属环接头垫圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 5: Metallic ring-joint gaskets for use with steel flanges; German version EN 12560-5:2001 |
| DIN EN 12560-6-2004 | 法兰及其接头.分级标示法兰用垫圈.第6部分:钢法兰用涂覆的有锯齿金属垫圈 | Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges; German version EN 12560-6:2003 |
| DIN EN 12560-7-2004 | 法兰及其接头.等级标示法兰用垫圈.第7部分:与钢法兰一起使用的金属涂覆有套垫圈 | Flanges and their joints - Gaskets for Class designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges; German version EN 12560-7:2004 |
| DIN EN 12797-2000 | 钎焊.钎焊接头的破坏试验 | Brazing - Destructive tests of brazed joints; German version EN 12797:2000 |
| DIN EN 12799-2000 | 钎焊.钎焊接头的无损检验 | Brazing - Non-destructive examination of brazed joints; German version EN 12799:2000 |
| DIN EN 12814-1-1999 | 热塑性塑料半成品焊接接头的试验.第1部分:弯曲试验 | Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test; German version EN 12814-1:1999 |
| DIN EN 12814-2-2000 | 热塑性塑料半成品的焊接接头试验.第2部分:拉伸试验.德文版本EN 12814-2:2000 | Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test; German version EN 12814-2:2000 |
| DIN EN 12814-3-2005 | 热塑性半成品的焊接接头试验.第3部分:拉伸蠕变试验 | Testing of welded joints of thermoplastics semi-finished products - Part 3: Tensile creep test (including amendment A1:2005); English version of DIN EN 12814-3:2000 + A1:2005 |
| DIN EN 12814-4-2001 | 热塑性半成品焊接接头试验.第4部分:剥离试验 | Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test; German version EN 12814-4:2001 |
| DIN EN 12814-5-2000 | 热塑性塑料半成品的焊接接头试验.第5部分:宏观检查 | Testing of welded joints of thermoplastics semi-finished products - Part 5: Macroscopic examination; German version EN 12814-5:2000 |
| DIN EN 12814-6-2000 | 热塑性塑料半成品的焊接接头试验.第6部分:低温拉伸试验 | Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test; German version EN 12814-6:2000 |
| DIN EN 12814-7-2003 | 热塑半成品焊接接头试验.第7部分:腰形试验样品抗拉试验 | Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002 |
| DIN EN 12814-8 Berichtigung 1-2004 | 热塑性半成品焊接接头的检验.第8部分:要求 | Testing of welded joints of thermoplastic semi-finished products - Part 8: Requirements; German version EN 12814-8:2001 |
| DIN EN 12814-8-2001 | 热塑性半成品焊接接头试验.第8部分:要求 | Testing of welded joints of thermoplastic semi-finished products - Part 8: Requirements; German version EN 12814-8:2001 |
| DIN EN 1306-1996 | 内河航运船只.污水排放接头 | Inland navigation vessels - Connections for the discharge of waste water; German version EN 1306:1996 |
| DIN EN 13090-2001 | 建筑物燃气管道螺纹接头再密封方法 | Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000 |
| DIN EN 13100-1-2000 | 热塑性塑料半成品焊接接头的无损检验.第1部分:外观检验 | Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:1999 |
| DIN EN 13100-2-2005 | 热塑性半成品焊接接头的无损检验.第2部分:X射线照相检验 | Non-destructive testing of welded joints of thermoplastics semi-finished products - Part 2: X-ray radiographic testing; German version EN 13100-2:2004 |
| DIN EN 13100-3-2005 | 热塑性半成品焊接接头的无损检验.第3部分:超声检验 | Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing; German version EN 13100-3:2004 |
| DIN EN 14325-2004 | 化学防护服.化学防护服材料、接缝、接头及总体的试验方法和性能分类 | Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages; German version EN 14325:2004 |
| DIN EN 1435-2002 | 焊缝的无损检验.焊接接头的X光照相检验; 德文版本 EN 1435:1997 + A1:2002 | Non-destructive testing of welds - Radiographic testing of welded joints; German version EN 1435:1997 + A1:2002 |
| DIN EN 14420-4-2007 | 带夹具的软管配件.第4部分:法兰接头 | Hose fittings with clamp units - Part 4: Flange connections; English version of DIN EN 14420-4:2007-04 |
| DIN EN 14420-6-2007 | 带夹具的软管配件.第6部分:TW油罐车接头 | Hose fittings with clamp units - Part 6: TW tank truck couplings (includes Amendment A1:2007); English version of DIN EN 14420-6:2004+A1:2007-04 |
| DIN EN 14420-7-2007 | 带夹件的软管配件.第7部分:凸轮锁紧接头 | Hose fittings with clamp units - Part 7: Cam locking couplings (includes Amendment A1:2007); English version of DIN EN 14420-7:2007-04 |
| DIN EN 14420-8-2007 | 带夹具的软管配件.第8部分:对称半节管接头(吉尔曼系统) | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) (includes Amendment A1:2007); English version of DIN EN 14420-8:2007-04 |
| DIN EN 14454-2005 | 防饮用水回流污染的装置.软管接头防回流装置DN 15至DN 32. A型H系列 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 - Family H; type A; German version EN 14454:2005 |
| DIN EN 1451-1-1999 | 建筑物结构体中的废水和污物排放系统用塑料管道系统(低温和高温).聚丙烯(PP).第1部分:管、管接头和管道系统 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1451-1:1998 |
| DIN EN 14525-2005 | 不同材料(球墨铸铁、灰铸铁、钢、PVC-U、PE和纤维水泥)管道用球墨铸铁大公差联接器和法兰接头 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement; German version EN 14525:2004 |
| DIN EN 14741-2006 | 热塑管和管道系统.地下非压力设施用接头.通过评估密封压力测定弹性密封件接头的长期密封性能的试验方法 | Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure English version of DIN EN 14741:2006-05 |
| DIN EN 15096-2008 | 饮用水防回流污染的装置.水龙带接头反真空阀.DN15～DN25包括家用H、B和D型.通用技术规范 | Devices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification; English version of DIN EN 15096:2008-04 |
| DIN EN 1591-1 Bb.1-2001 | 法兰及其接头.密封圈法兰接头设计规则.背景信息 | Flanges and their joints - Design rules for gasketed circular flange connections - Background information |
| DIN EN 1591-2-2008 | 法兰及其接头.带衬垫的圆形法兰接头设计规则.第2部分:衬垫参数 | Flanges and their joints - Design rules for gasketed circular flange connections - Part 2: Gasket parameters; English version of DIN EN 1591-2:2008-09 |
| DIN EN 1712-2002 | 焊缝的无损检验.焊接接头的超声波检验.验收标准; 德文版本 EN 1712:1997 + A1:2002 | Non-destructive testing of welds - Ultrasonic testing of welded joints - Acceptance levels; German version EN 1712:1997 + A1:2002 |
| DIN EN 1714-2002 | 焊缝的无损检验.焊接接头的超声波检验; 德文版本 EN 1714:1997 + A1:2002 | Non-destructive testing of welds - Ultrasonic testing of welded joints; German version EN 1714:1997 + A1:2002 |
| DIN EN 175301-803-2007 | 详细规范:不可分的0.8mm 厚自锁螺纹的扁接头矩形连接器 | Detail Specification: Rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable; German version EN 175301-803:2006 |
| DIN EN 1759-3-2004 | 法兰及其接头.等级标示的管、阀、配件和附件用圆形法兰.第3部分:铜合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004 |
| DIN EN 1759-4-2003 | 法兰及其接头.指定类别的管、阀、配件和附件用圆形法兰.第4部分:铝合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges; German version EN 1759-4:2003 |
| DIN EN 1993-1-8-2005 | 欧洲法规3:钢结构的设计.第1-8部分:接头的设计 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints; German Version EN 1993-1-8;2005 |
| DIN EN 205-2003 | 胶粘剂.非结构上用木材胶粘剂.搭接接头的抗拉伸剪切强度的测定 | Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints; German version EN 205:2003 |
| DIN EN 2290-1-1998 | 航空航天系列.可调节控制杆端部接头的铝合金飞行控制杆体.第1部分:尺寸和负载 | Aerospace series - Rod bodies flight control in aluminium alloy, for adjustable end fittings - Part 1: Dimensions and loads; German version EN 2290-1:1998 |
| DIN EN 2569-1992 | 航空航天系列.操纵钢缆接头和松紧螺丝扣.技术规范 | Aerospace series; control cable fittings and turnbarrels; technical specification; german version EN 2569:1991 |
| DIN EN 2591-512-2003 | 航空航天系列.光电连接元件.试验方法.第512部分:密封连接器外壳固定接头有效性 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell; German and English version EN 2591-512:2002 |
| DIN EN 274-1-2002 | 洁具下水管接头.第1部分:要求 | Waste fittings for sanitary appliances - Part 1: Requirements; German version EN 274-1:2002 |
| DIN EN 274-2-2002 | 洁具下水管接头.第2部分:试验方法 | Waste fittings for sanitary appliances - Part 2: Test methods; German version EN 274-2:2002 |
| DIN EN 274-3-2002 | 洁具下水管接头.第3部分:质量控制 | Waste fittings for sanitary appliances - Part 3: Quality control; German version EN 274-3:2002 |
| DIN EN 295-4-1995 | 排水和污水用陶土管和配件及管接头.第4部分:专用配件、转换接头和相容附件的要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adapters and compatible accessories; German version EN 295-4:1995 |
| DIN EN 295-7-1995 | 陶土污水管.配件及管连接件.第7部分:陶土管和管接头前移要求 | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 7: Requirements for vitrified clay pipes and joints for pipe jacking; German version EN 295-7:1995 |
| DIN EN 301006-1-2000 | 模拟和综合业务数字网(ISDN)用户线路的电路试验用局域交换Q3接口.第1部分:Q3接头规范 | Q3 interface at the Local Exchange (LE) for line and circuit testing of analogue and Integrated Services Digital Network (ISDN) subscriber lines - Part 1: Q3 interface specification (Endorsement of the English version EN 301006-1 V 1.2.3 (1998-10) as German Standard) |
| DIN EN 3080-2007 | 航空航天系列.钛合金8°30'管接头.带有推力线螺母的缩短三通 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Tees, reduced, branch with thrust wire nut; German and English version EN 3080:2006 |
| DIN EN 3082-2004 | 航空航天系列.钛合金管连接件8°30'.修理用闷头焊接活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead welded end, for repair; German and English version EN 3082:2001 + AC:2003 |
| DIN EN 3083-2004 | 航空航天系列.钛合金管连接件8°30'.修理用闷头长焊接端头活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long welded end, for repair; German and English version EN 3083:2001 + AC:2003 |
| DIN EN 3084-2004 | 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, welded end threaded for repair; German and English version EN 3084:2001 + AC:2003 |
| DIN EN 3244-2002 | 航空航天系列.钛合金8°30'管连接件.双端管接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, double ended; German version EN 3244:2001 |
| DIN EN 3245-2002 | 航空航天系列.钛合金8°30'管连接件.异径管接头; 德文版本 EN 3245:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, reducer; German version EN 3245:2001 |
| DIN EN 3246-2002 | 航空航天系列.钛合金8°30'管连接件.闷头管接头; 德文版本 EN 3246:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead; German version EN 3246:2001 |
| DIN EN 3247-2002 | 航空航天系列.钛合金8°30'管连接件.焊接端的闷头管接头; 德文版本 EN 3247:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, welded end; German version EN 3247:2001 |
| DIN EN 3269-2006 | 航空航天系列.8°30'钛合金管接头.带动态梁密封端的单头卡套.德文和英文版本EN 3269-2001 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Ferrules, blind, with dynamic beam seal end; German and English version EN 3269:2001 |
| DIN EN 3272-2006 | 航空航天系列.8°30'管接头.焊接箍用动态梁密封端.几何构型.德文和英文版本EN 3272-2001 | Aerospace series - Pipe coupling 8°30' - Dynamic beam seal end for ferrule, welded - Geometric configuration; German and English version EN 3272:2001 |
| DIN EN 3373-001-2008 | 航空航天系列.导电体压接端头和内嵌式接头.第001部分:技术规范 | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 001: Technical specification; German and English version EN 3373-001:2007 |
| DIN EN 3566-2004 | 航空航天系列.钛合金管连接件8°30'.带锁紧环的接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Adaptors with lockring; German and English version EN 3566:2001 + AC:2003 |
| DIN EN 3690-2004 | 航空航天系列.钛合金管连接件8°30'.长闷头活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long; German and English version EN 3690:2001 + AC:2003 |
| DIN EN 3691-2004 | 航空航天系列.钛合金管连接件8°30'.焊接端长闷头活接头 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long, welded end; German and English version EN 3691:2001 + AC:2003 |
| DIN EN 3851-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.直转动螺套 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nut, straight; German and English version EN 3851:2003 |
| DIN EN 3852-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.有螺纹的焊接直活管节 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded; German and English version EN 3852:2002 |
| DIN EN 3853-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.有螺纹直活管节 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Straight unions, threaded; German and English version EN 3853:2002 |
| DIN EN 3854-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.焊接套圈 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Ferrules, welded; German and English version EN 3854:2002 |
| DIN EN 3855-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.帽 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Caps; German and English version EN 3855:2002 |
| DIN EN 3856-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.推力线用转动螺套 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Swivel nuts for thrust wire; German and English version EN 3856:2002 |
| DIN EN 3857-2004 | 航空航天系列.钛合金TI-P64001的60球面管子接头.90焊接弯头 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Elbows 90°, welded; German and English version EN 3857:2002 |
| DIN EN 387-2002 | 胶合板.大尺寸指形接头.性能要求和最低生产要求 | Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements; German version EN 387:2001 |
| DIN EN 4020-2006 | 航空航天系列. 8°30'钛合金管接头.带推进线螺母的90°弯头焊接端 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 90°, welded end with thrust wire nut; German and English version EN 4020:2001 |
| DIN EN 4025-2006 | 航空航天系列. 8°30'钛合金管接头.45°凸檐弯头 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 45°, bulkhead; German and English version EN 4025:2001 |
| DIN EN 4028-2008 | 航空航天系列.钛合金中8°30′管接头.运转中带止推金属丝螺母的三通管 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Tees with thrust wire nut on run; German and English version EN 4028:2001 |
| DIN EN 4051-2003 | 航空航天系列.钛合金TI-P64001、球形、60度管连接器.油口接头 | Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001 - Port connection; German and English version EN 4051:2002 |
| DIN EN 4186-2002 | 航空航天系列.钛合金管连接件 8°30'.十字形管接头; 德文版本 EN 4186:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, cross; German version EN 4186:2001 |
| DIN EN 4187-2006 | 航空航天系列.8°30'钛合金管接头.90°闷头长弯管 | Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 90° bulkhead, long; German and English version EN 4187:2001 |
| DIN EN 4233-2002 | 航空航天系列.钛合金管连接件 8°30'.带螺纹的焊接管接头; 德文版本 EN 4233:2001 | Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, welded, threaded; German version EN 4233:2001 |
| DIN EN 4550-3-2004 | 航空航天系列.管道连接件37设计构造.英制.第3部分:端口接头 | Aerospace series - Pipe coupling 37° - Design configuration - Inch series - Part 3: Port connections; German and English version EN 4550-3:2003 |
| DIN EN 4552-2004 | 航空航天系列.耐热钢制37球面管子接头.焊接端直螺纹接头.英制系列 | Aerospace series - Pipe coupling, 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series; German and English version EN 4552:2003 |
| DIN EN 4553-2004 | 航空航天系列.耐热钢制37球面管子接头.焊接端90弯管螺纹接头.英制系列 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Elbow 90° nipples, welded end - Inch series; German and English version EN 4553:2003 |
| DIN EN 4554-2004 | 航空航天系列.耐热钢制37球面管子接头.加螺纹直活管节.英制系列 | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight unions, threaded - Inch series; German and English version EN 4554:2003 |
| DIN EN 4555-2004 | 航空航天系列.耐热钢制37球面管子接头.焊接端套圈.英制系列 | Aerospace series - Pipe coupling 37°, in heat resisting steel - Ferrules, welded end - Inch series; German and English version EN 4555:2003 |
| DIN EN 4556-2004 | 航空航天系列.耐热钢制37球面管子接头.帽组件.英制系列 | Aerospace series - Pipe coupling 37°, in heat resisting steel - Cap assemblies - Inch series; German and English version EN 4556:2003 |
| DIN EN 4557-2004 | 航空航天系列.耐热钢制37球面管子接头.焊接端T形螺纹接头.英制系列 | Aerospace series - Pipe couplings, 37°, spherical, in heat resisting steel - Tees nipples, welded end - Inch series; German and English version EN 4557:2003 |
| DIN EN 4561-2004 | 航空航天系列.耐热钢制焊接管子接头.90弯管.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90° - Inch series; German and English version EN 4561:2003 |
| DIN EN 4562-2004 | 航空航天系列.耐热钢制焊接管子接头.异径管.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series; German and English version EN 4562:2003 |
| DIN EN 4563-2004 | 航空航天系列.耐热钢制焊接管子接头.三通.英制系列 | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series; German and English version EN 4563:2003 |
| DIN EN 50377-2-1-2002 | 光纤通信系统接头组件和互连元件.产品规范.第2-1部分:端接在IEC 60793-2 B1类单模纤维上的FC-PC型接头组件 | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1: Type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre; German version EN 50377-2-1:2001 |
| DIN EN 512/A1-2002 | 纤维水泥制品.压力管道和接头.修改件A1:2001; 德文版本 EN 512:1994/A1:2001 | Fibre-cement products - Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001 |
| DIN EN 545-2007 | 水管用球墨铸铁管、配件、附件及其接头.要求和试验方法 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; English version of DIN EN 545:2007-02 |
| DIN EN 60512-16-13-2009 | 电子设备用连接器.试验和测量.第16-13部分:触点和终端的机械试验.试验16m:无钎焊缠绕接头的退绕能力 | Connectors for electronic equipment - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Un-wrapping, solderless wrapped connections (IEC 60512-16-13:2008); German version EN 60512-16-13:2008 |
| DIN EN 61466-1-1997 | 额定电压超过1KV的架空线用复合绝缘子串组合件.第1部分:标准强度等级和端接头 | Composite string insulator units for overhead lines with a nominal voltage greater than 1 kV - Part 1: Standard strength classes and end fittings (IEC 61466-1:1997); German version EN 61466-1:1997 |
| DIN EN 639-1994 | 包括管接头和配件的混凝土承压管通用要求 | Common requirements for concrete pressure pipes, including joints and fittings; German version EN 639:1994 |
| DIN EN 712-1994 | 热塑塑料管道系统.压力管和管接头之间承载端部的机械连接.恒定纵向作用力下抗拉出力的试验方法 | Thermoplastics piping systems; end-load bearing mechanical joints between pressure pipes and fittings; test method for resistance to pull-out under constant longitudinal force; German version EN 712:1993 |
| DIN EN 713-1994 | 塑料管道系统.管接头和聚烯烃压力管间的机械连接.在内压和弯曲下密封性的试验方法 | Plastics piping systems; mechanical joints between fittings and polyolefin pressure pipes; test method for leaktightness under internal pressure of assemblies subjected to bending; German version EN 713:1993 |
| DIN EN 715-1994 | 热塑塑料管道系统.小直径压力管和管接头之间承载端部的连接.在水内压力下（包括端头推力）密封试验方法 | Thermoplastics piping systems; end-load bearing joints between small diameter pressure pipes and fittings; test method for leaktightness under internal water pressure, including end thrust; German version EN 715:1994 |
| DIN EN 728-1997 | 塑料管和管道系统.聚烯烃管和接头.氧化感应时间测定 | Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time; German version EN 728:1997 |
| DIN EN 876-1995 | 金属材料焊接的破坏试验.有熔焊接头的焊接金属的纵向拉伸试验 | Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints; German version EN 876:1995 |
| DIN EN 911-1995 | 塑料管道系统.热塑塑料压力管道用的弹性密封环型接头和机械接头的连接.外部静力液压条件下的防漏试验方法; | Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure; German version EN 911:1995 |
| DIN EN ISO 10042-2006 | 焊接.铝和铝合金的弧焊接头.缺陷质量分级 (ISO 10042-2005).德文版本 EN ISO 10042-2005 | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2005); English version of DIN EN ISO 10042:2006-02 |
| DIN EN ISO 10321-2008 | 土工布.用宽条法对接头/接缝处的拉伸试验 | Geosynthetics - Tensile test for joints/seams by wide-width strip method (ISO 10321:2008); German version EN ISO 10321:2008 |
| DIN EN ISO 10692-1-2003 | 储气瓶.微电子工业用储气瓶阀接头.第1部分:输出口接头 | Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 1: Outlet connections (ISO 10692-1:2001); German version EN ISO 10692-1:2001 |
| DIN EN ISO 10692-2-2003 | 储气瓶.微电子工业用储气瓶阀接头.第2部分:储气瓶阀接头规范和型式试验 | Gas cylinders - Gas cylinder valve connections for use in the microelectronic industry - Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001 |
| DIN EN ISO 11144-1996 | 牙科设备.给排水管接头 | Dental equipment - Connections for supply and waste lines (ISO 11144:1995); German version EN ISO 11144:1996 |
| DIN EN ISO 1167-1-2006 | 流体传输用热塑管、接头和组件.抗内压力的测定.第1部分:通用方法 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006); English version of DIN EN ISO 1167-1:2006-05 |
| DIN EN ISO 1167-2-2006 | 流体传输用热塑管、接头和组件.抗内压力的测定.第2部分:管试件的准备 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006); English version of DIN EN ISO 1167-2:2006-05 |
| DIN EN ISO 13919-1-1996 | 焊接.电子和激光束焊接接头.质量缺陷等级指南.第1部分:钢 | Welding - Electrons and laser beam welded joints; guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996); German version EN ISO 13919-1:1996 |
| DIN EN ISO 13919-2-2001 | 焊接.电子和激光束焊接接头.质量缺陷等级导则.第1部分:铝及可焊铝合金 | Welding - Electron and laser beam welded joints; Guidance on quality levels for imperfections - Part 2: Aluminium and its weldable alloys (ISO 13919-2:2001); German version EN ISO 13919-2:2001 |
| DIN EN ISO 14324-2003 | 电阻点焊.焊接的有损检验.点焊接头的疲劳试验方法 | Resistance spot welding - Destructive tests of welds - Method for the fatigue testing of spot welded joints (ISO 14324:2003); German version EN ISO 14324:2003 |
| DIN EN ISO 15236-4-2004 | 衬钢丝绳芯传送带.第4部分:硬化带接头 | Steel cord conveyor belts - Part 4: Vulcanized belt joints (ISO 15236-4:2004); German Version EN ISO 15236-4:2004 |
| DIN EN ISO 16070-2006 | 石油和天然气工业.下井设备.锁芯轴和落地接头 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005); English version EN ISO 16070:2005 |
| DIN EN ISO 17659-2005 | 焊接.图示焊接接头的多语种术语 | Welding - Multilingual terms for welded joints with illustrations (ISO 17659:2002); Trilingual version EN ISO 17659:2004 |
| DIN EN ISO 17660-1 Berichtigung 1-2007 | 焊接.钢筋焊接.第1部分:承载焊接接头(ISO 17660-1-2006) | Welding - Welding of reinforcing steel - Part 1: Load-bearing welded joints (ISO 17660-1:2006); German version EN ISO 17660-1:2006, Corrigenda to DIN EN ISO 17660-1:2006-12 |
| DIN EN ISO 17660-2 Berichtigung 1-2007 | 焊接.钢筋焊接.第2部分:非承载焊接接头(ISO 17660-2-2006) | Welding - Welding of reinforcing steel - Part 2: Non load-bearing welded joints (ISO 17660-2:2006); German version EN ISO 17660-2:2006, Corrigenda to DIN EN ISO 17660-2:2006-12 |
| DIN EN ISO 18279-2004 | 铜焊.铜焊接头的缺陷 | Brazing - Imperfections in brazed joints (ISO 18279:2003); German version EN ISO 18279:2003 |
| DIN EN ISO 5183-1-2000 | 电阻焊接设备.外锥度1:10电极接头.第1部分:锥度1:10圆锥形接头 | Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998); German version EN ISO 5183-1:2000 |
| DIN EN ISO 5183-2-2002 | 电阻点焊.外锥度1:10电极接头.第2部分:轴端推力电极用平行柄接头(ISO 5183-2:2000); 德文版本 EN ISO 5183- | Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes (ISO 5183-2:2000); German version EN ISO 5183-2:2002 |
| DIN EN ISO 5356-1-2004 | 麻醉和呼吸设备.圆锥形接头.第1部分:锥体和锥套 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2004); German version EN ISO 5356-1:2004 |
| DIN EN ISO 5817 Berichtigung 1-2007 | 焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺陷的质量等级.技术勘误DIN EN ISO 5817-2006 | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003 + Cor. 1:2006); German version EN ISO 5817:2003 + AC:2006, Corrigenda to DIN EN ISO 5817:2006-10 |
| DIN EN ISO 5817-2006 | 焊接.钢、镍、钛及其合金的熔焊接头(束焊除外).缺陷的质量等级(ISO 5817-2003 + Cor.1-2006) | Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003 + Cor. 1:2006); German version EN ISO 5817:2007 |
| DIN EN ISO 6149-1-2007 | 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第1部分:锪孔沟槽中装 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2006)English version of DIN EN ISO 6149-1:2007-05 |
| DIN EN ISO 6149-2-2007 | 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第2部分:重型(S系列) | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006)English version of DIN EN ISO 6149-2:2007-05 |
| DIN EN ISO 6149-3-2007 | 用于液压传动和一般用途的管接头.带ISO 261米制螺纹和O形圈密封的端口和柱头螺栓端头.第3部分:轻型(L系列) | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006)English version of DIN EN ISO 6149-3:2007-05 |
| DIN EN ISO 8092-3-1999 | 道路车辆.车载电气线束的连接.第3部分:多极连接接头,尺寸和特殊要求 | Road vehicle - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections, dimensions and specific requirements (ISO 8092-3:1996); German version EN ISO 8092-3:1999 |
| DIN EN ISO 8434-1-2008 | 液压传动和通用金属管连接件.第1部分:24°锥形接头 | Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007); German version EN ISO 8434-1:2007 |
| DIN EN ISO 8795-2001 | 人类生活用水的塑料输水管道系统.偏移评定.塑料管、配件及其接头偏移值测定 | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001); German version EN ISO 8795:2001 |
| DIN EN ISO 9093-1-1998 | 小型船舶.船底阀和船体外壳管接头.第1部分:金属件 | Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994); German version EN ISO 9093-1:1997 |
| DIN EN ISO 9142-2004 | 胶粘剂.粘接接头测试用标准试验室老化条件的选择指南 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003 |
| DIN EN ISO 9692-2-1999 | 焊接和相关工艺.接头的预处理.第2部分:钢的埋弧焊（ISO 9692-2-1998,包括技术勘误AC-1999) | Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998, includes Corrigendum AC:1999); German version EN ISO 9692-2:1998 + AC:1999 |
| DIN EN ISO 9692-4-2003 | 焊接和相关工艺.接头准备的推荐标准.第4部分:复合钢 | Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003); German version EN ISO 9692-4:2003 |
| DIN ISO 10583-1998 | 航空航天流体系统.管/管接头组件的试验方法 | Aerospace fluid systems - Test methods for tube/fitting assemblies (ISO 10583:1993) |
| DIN ISO 12151-2-2004 | 液压传动和通用连接件.软管接头.第2部分:带ISO 8434-1和8434-4 24°锥形连接件末端和O形圈的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003) |
| DIN ISO 12151-3-2004 | 液压传动和通用连接件.软管接头.第3部分:带ISO 6162法兰末端的软管接头 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999) |
| DIN ISO 15171-1-2004 | 流体传动和一般用途管接头.诊断用液压管接头.第1部分:非压力下连接的管接头 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
| DIN ISO 15171-2-2004 | 流体传动和一般用途管接头.诊断用液压管接头.第2部分:带M12 2螺纹端的压力连接接头 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 × 2 end for connection under pressure (ISO 15171-2:2000) |
| DIN ISO 15407-1-2003 | 气压传动.五气口方向控制阀、规格18mm和26mm.第1部分:无电气接头的安装面 | Pneumatic fluid power - Five-port directional control valves, sizes 18 mm and 26 mm - Part 1: Mounting interface surfaces without electrical connector (ISO 15407-1:2000) |
| DIN ISO 16030-2007 | 气压传动.接头.端口和柱头螺栓端头.(ISO 16030-2001+修改件1-2005) | Pneumatic fluid power - Connections - Ports and stud ends (ISO 16030:2001 + Amd. 1:2005)English version of DIN ISO 16030-2007-05 |
| DIN ISO 22826-2008 | 金属材料焊缝的破坏性试验.使用激光和电子束焊接的窄接头硬度试验(维氏和努氏硬度试验) | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
| DIN ISO 5599-1-2005 | 气压传动.五气口方向控制阀.第1部分:不带电接头的安装面 | Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector (ISO 5599-1:2001);English version of DIN ISO 5599-1:2005 |
| DIN ISO 5620-1-1994 | 造船和船舶结构.饮用水箱注水接头.第1部分:一般要求; 等同采用 ISO 5620-1:1992 | Shipbuilding and marine structures; filling connection for drinking water tanks; general requirements; identical with ISO 5620-1:1992 |
| DIN ISO 5620-2-1994 | 造船和船舶结构.饮用水箱注水接头.第2部分:部件; 等同采用 ISO 5620-2:1992 | Shipbuilding and marine structures; filling connection for drinking water tanks; components; identical with ISO 5620-2:1992 |
| DIN ISO 7803-1995 | 商用公路车辆.转向球形接头; 等同采用 ISO 7803:1987 | Commercial road vehicles - Steering ball joints; identical with ISO 7803:1987 |
| DIN VDE 0710-11-1968 | 工作电压低于1kV的照明配件规范.第11部分:嵌入式信号灯接头规范规则 | Specifications for lighting fittings with service voltages below 1000 V; Specification rules for flush-fitting signal-light fittings |
| 编号 | 中文名称 | 英文名称 |